A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer.
Fixes: 5725bc6082 ("Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag.
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20260518002800.1361430-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260520135034.1060859-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260521000555.3712030-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1].
Fixes: 2bb36870e8 ("Bluetooth: Unify advertising instance flags check")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A TDX module update is a multi-step process, and any step can fail.
The current update flow continues to later steps after an error.
Continuing after a failure can cause the TDX module to enter an
unrecoverable state.
But certain failures during the initial module shutdown step should
simply return an error to userspace, so the update can be retried
cleanly.
To preserve that recoverability, one option would be to abort the
update only for those failures, since they occur before any TDX module
state is changed. But special-casing specific failures in specific
steps would complicate the do-while() update loop for no benefit.
Simply abort update on any failure, at any step.
Track failures for each step, stop the update loop once a failure is
observed, and do not advance the state machine to the next step.
[ dhansen: style nits ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Link: https://lore.kernel.org/linux-coco/aQFmOZCdw64z14cJ@google.com/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-16-chao.gao@intel.com
tl;dr: Use stop_machine() and a state machine based on the
"MULTI_STOP" pattern to implement core TDX module update logic.
Long version:
TDX module updates require careful synchronization with other TDX
operations. The requirements are (#1/#2 reflect current behavior that
must be preserved):
1. SEAMCALLs need to be callable from both process and IRQ contexts.
2. SEAMCALLs need to be able to run concurrently across CPUs
3. During updates, only update-related SEAMCALLs are permitted; all
other SEAMCALLs shouldn't be called.
4. During updates, all online CPUs must participate in the update work.
No single lock primitive satisfies all requirements. For instance,
rwlock_t handles #1/#2 but fails #4: CPUs spinning with IRQs disabled
cannot be directed to perform update work.
Use stop_machine() as it is the only well-understood mechanism that can
meet all requirements.
And TDX module updates consist of several steps (See Intel Trust Domain
Extensions (Intel TDX) Module Base Architecture Specification, Chapter
"TD-Preserving TDX module Update"). Ordering requirements between steps
mandate lockstep synchronization across all CPUs.
multi_cpu_stop() provides a good example of executing a multi-step task
in lockstep across CPUs, but it does not synchronize the individual
steps inside the callback itself.
Implement a similar state machine as the skeleton for TDX module
updates. Each state represents one step in the update flow, and the
state advances only after all CPUs acknowledge completion of the current
step. This acknowledgment mechanism provides the required lockstep
execution.
The update flow is intentionally simpler than multi_cpu_stop() in two ways:
a) use a spinlock to protect the control data instead of atomic_t and
explicit memory barriers.
b) omit touch_nmi_watchdog() and rcu_momentary_eqs(), which exist
there for debugging and are not strictly needed for this update flow
Potential alternative to stop_machine()
=======================================
An alternative approach is to lock all KVM entry points and kick all
vCPUs. Here, KVM entry points refer to KVM VM/vCPU ioctl entry points,
implemented in KVM common code (virt/kvm). Adding a locking mechanism
there would affect all architectures KVM supports. And to lock only TDX
vCPUs, new logic would be needed to identify TDX vCPUs, which the KVM
common code currently lacks. This would add significant complexity and
maintenance overhead to KVM for this TDX-specific use case, so don't take
this approach.
[ dhansen: normal changelog/style munging ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://patch.msgid.link/20260520133909.409394-15-chao.gao@intel.com
There are two important ABIs here:
'struct tdx_image' - The on-disk and in-memory format for a TDX
module update image.
'struct seamldr_params' - The in-memory ABI passed to the TDX module
loader. Points to a single 'struct tdx_image'
broken up into 4k pages.
Userspace supplies the update image in 'struct tdx_image' format. The
image consists of a header followed by a sigstruct and the module
binary. P-SEAMLDR, however, consumes 'struct seamldr_params' rather
than the image directly.
Parse the 'struct tdx_image' provided by userspace and populate a
matching 'struct seamldr_params'.
The 'tdx_image' ABI is versioned. Two public versions exist today:
0x100 and 0x200. This kernel only accepts 0x200. The older 0x100
format is being deprecated and is intentionally not supported here.
Future versions of the module might be able to use the same ABIs
(user/kernel and kernel/SEAMLDR) but they will not be able to use this
kernel code.
Reject module images without that specific version. This ensures that
the kernel is able to understand the passed-in format.
Validate the 'struct tdx_image' header before using it, because the
header is consumed solely by the kernel to locate the sigstruct and
module within the image. Do not validate the payload itself. The
sigstruct and module pages are passed through to P-SEAMLDR, which
validates them as part of the update.
sigstruct_pages_pa_list currently has only one entry, but it will grow
to four pages in the future. Keep it as an array for symmetry with
module_pages_pa_list and for extensibility.
[ dhansen: normal changelog clarification/munging ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-14-chao.gao@intel.com
tl;dr: Select fw_upload for doing TDX module updates. The process of
selecting among available update images is complicated and nuanced. Punt
the selection process out to userspace. One existing userspace
implementation today is the script in the Intel TDX Module Binaries
repository[1].
Long Version:
The kernel supports two primary firmware update mechanisms:
1. request_firmware() - used by microcode, SEV firmware, hundreds of
other drivers
2. 'struct fw_upload' - used by CXL, FPGA updates, dozens of others
The key difference between is that request_firmware() loads a named file
from the filesystem where the filename is kernel-controlled, while
fw_upload accepts firmware data directly from userspace.
TDX module firmware update selection policy is too complex for the kernel.
Leave it to userspace and use fw_upload.
Add a skeleton fw_upload implementation to be fleshed out in subsequent
patches.
Refactor the sysfs visiblity attribute function so it can be used as a
more generic flag for the presence of viable runtime update support.
Why fw_upload instead of request_firmware()?
============================================
Selecting a TDX module update image is not a simple "load the latest"
decision. Userspace needs to choose an image that is compatible with both
the platform and the currently running module.
Some constraints are hard requirements:
a. Module version series are platform-specific. For example, the 1.5.x
series runs on Sapphire Rapids but not Granite Rapids, which needs
2.0.x.
b. Updates are also constrained by version distance. A 1.5.6 module
might permit updates to 1.5.7 but not to 1.5.50.
There may also be userspace policy choices:
c. Decide the update direction: upgrade or downgrade
d. Choose whether to optimize for fewer updates or smaller version
steps, for example, 1.2.3=>1.2.5 versus 1.2.3=>1.2.4=>1.2.5.
Given that complexity, leave module selection to userspace and use
fw_upload.
1. https://github.com/intel/confidential-computing.tdx.tdx-module.binaries/blob/main/version_select_and_load.py
[ dhansen: add version script link, add more explanation of code moves,
fix some minor whitespace issues ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Link: https://lore.kernel.org/kvm/01fc8946-eb84-46fa-9458-f345dd3f6033@intel.com/
Link: https://patch.msgid.link/20260520133909.409394-13-chao.gao@intel.com
TDX-capable CPUs clobber the current VMCS on P-SEAMLDR calls. Clearing
the current VMCS behind KVM's back breaks KVM.
Future CPUs will fix this by preserving the current VMCS across
P-SEAMLDR calls. A future specification update will describe the
VMCS-clearing behavior as an erratum and to state that it does not
occur when IA32_VMX_BASIC[60] is set.
Add a CPU bug bit and refuse to expose P-SEAMLDR information on
affected CPUs.
Use a CPU bug bit to stay consistent with X86_BUG_TDX_PW_MCE. As a
bonus, the bug bit is visible to userspace, which allows userspace to
determine why these sysfs files are not exposed, and it can also be
checked by other kernel components in the future if needed.
== Alternatives ==
Two workarounds were considered but both were rejected:
1. Save/restore the current VMCS around P-SEAMLDR calls. This produces ugly
assembly code [1] and doesn't play well with #MCE or #NMI if they
need to use the current VMCS.
2. Move KVM's VMCS tracking logic to the TDX core code, which would break
the boundary between KVM and the TDX core code [2].
[ dhansen: comment and changelog munging. Add seamldr_call() bug check. ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/kvm/fedb3192-e68c-423c-93b2-a4dc2f964148@intel.com/ # [1]
Link: https://lore.kernel.org/kvm/aYIXFmT-676oN6j0@google.com/ # [2]
Link: https://patch.msgid.link/20260520133909.409394-12-chao.gao@intel.com
TDX module updates require userspace to select the appropriate module
to load. Expose necessary information to facilitate this decision. Two
values are needed:
- P-SEAMLDR version: for compatibility checks between TDX module and
P-SEAMLDR
- num_remaining_updates: indicates how many updates can be performed
Expose them as tdx-host device attributes visible only when updates
are supported.
Note that the underlying P-SEAMLDR attributes are available regardless
of update support; this only restricts their visibility to userspace.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-11-chao.gao@intel.com
P-SEAMLDR reports its state via SEAMLDR.INFO, including its version and
the number of remaining runtime updates.
This information is useful for userspace. For example, userspace can
use the P-SEAMLDR version to determine whether a candidate TDX module
is compatible with the running loader, and can use the remaining
update count to determine whether another runtime update is still
possible.
Add a helper to retrieve P-SEAMLDR information in preparation for
exposing P-SEAMLDR version and other necessary information to userspace.
Export the new kAPI for use by the "tdx_host" device.
Note that there are two distinct P-SEAMLDR APIs with similar names:
"SEAMLDR.INFO" is metadata about the loader. It's metadata for the
update process.
"SEAMLDR.SEAMINFO" is metadata about SEAM mode. It is for the module
init process, not for the update process.
Use SEAMLDR.INFO here.
For details, see "Intel Trust Domain Extensions - SEAM Loader (SEAMLDR)
Interface Specification".
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-10-chao.gao@intel.com
The TDX architecture uses the "SEAMCALL" instruction to communicate with
SEAM mode software. Right now, the only SEAM mode software that the kernel
communicates with is the TDX module. But, there is actually another
component that runs in SEAM mode but it is separate from the TDX module:
the persistent SEAM loader or "P-SEAMLDR". Right now, the only component
that communicates with it is the BIOS which loads the TDX module itself at
boot. But, to support updating the TDX module, the kernel now needs to be
able to talk to it.
P-SEAMLDR SEAMCALLs differ from TDX module SEAMCALLs in areas such as
concurrency requirements.
Add a P-SEAMLDR wrapper to handle these differences and prepare for
implementing concrete functions.
Use seamcall_prerr() (not '_ret') because current P-SEAMLDR calls do not
use any output registers other than RAX.
Note: Despite the similar name, the NP-SEAMLDR ("Non-Persistent")
(ACM) invoked exclusively by the BIOS at boot rather than a component
running in SEAM mode. The kernel cannot call it at runtime. It exposes
no SEAMCALL interface.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://cdrdv2.intel.com/v1/dl/getContent/733582 # [1]
Link: https://patch.msgid.link/20260520133909.409394-9-chao.gao@intel.com
For TDX module updates, userspace needs to select compatible update
versions based on the current module version.
For example, the 1.5.x series runs on Sapphire Rapids but not Granite
Rapids, which needs 2.0.x. Updates are also constrained by version
distance, so a 1.5.6 module might permit updates to 1.5.7 but not to
1.5.20.
Start the process of punting the version selection logic to userspace.
Expose the TDX module version in the new faux device.
Define TDX_VERSION_FMT macro for the TDX version format since it will be
used multiple times. Also convert an existing print statement to use it.
== Background ==
For posterity, here's what other firmware mechanisms do:
1. AMD SEV leverages an existing PCI device for the PSP to expose
metadata. TDX uses a faux device as it doesn't have PCI device
in its architecture.
2. Microcode uses per-CPU virtual devices to report microcode revisions
because CPUs can have different revisions. But, there is only a
single TDX module, so exposing the TDX module version through a global
TDX faux device is appropriate
3. ARM's CCA implementation isn't in-tree yet, but will likely follow a
similar faux device approach, though it's unclear whether they need
to expose firmware version information
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-8-chao.gao@intel.com
TDX depends on a platform firmware module that runs on the CPU.
Unlike other CoCo architectures, TDX has no hardware "device"
running the show, just a blob on the CPU.
Create a virtual device to anchor interactions with this platform
firmware. This lets later code:
- expose metadata: TDX module version, seamldr version, to userspace
as device attributes
- implement firmware uploader APIs (which are tied to a device) to
support TDX module runtime updates
Use a faux device because the TDX module is singular within the system
and has no platform resources. Using a faux device eliminates the need
to create a stub bus.
The call to tdx_get_sysinfo() ensures that the TDX module is ready to
provide services.
Note that AMD has a PCI device for the PSP for SEV and ARM CCA will
likely have a faux device [1].
Thanks to Dan and Yilun for all the help on this one.
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-7-chao.gao@intel.com
TDX host core code implements three seamcall*() helpers to make SEAMCALLs
to the TDX module. Currently, they are implemented in <asm/tdx.h> and
are exposed to other kernel code which includes <asm/tdx.h>.
However, other than the TDX host core, seamcall*() are not expected to
be used by other kernel code directly. For instance, for all SEAMCALLs
that are used by KVM, the TDX host core exports a wrapper function for
each of them.
Move seamcall*() and related code out of <asm/tdx.h> and make them only
visible to TDX host core.
Since TDX host core tdx.c is already very heavy, don't put low level
seamcall*() code there but to a new dedicated "seamcall_internal.h". Also,
currently tdx.c has seamcall_prerr*() helpers which additionally print
error message when calling seamcall*() fails. Move them to
"seamcall_internal.h" as well. In such way all low level SEAMCALL helpers
are in a dedicated place, which is much more readable.
Copy the copyright notice from the original files and consolidate the
date ranges to:
Copyright (C) 2021-2023 Intel Corporation
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vishal Annapurve <vannapurve@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-6-chao.gao@intel.com
The kernel uses several global flags to guard one-time TDX initialization
flows and prevent them from being repeated.
When the TDX module is updated, all of those states must be reset so that
the module can be initialized again. Today those states are kept as
separate global variables, which makes the reset path awkward and easy to
miss when a new state is added.
Group the states into a single structure so they can be reset together, for
example with memset(), and so a newly added state won't be missed.
Drop the __ro_after_init annotation from tdx_module_initialized because
the other two states do not have it. And with TDX module update support,
all the states need to be writable at runtime.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-4-chao.gao@intel.com
TDX module global initialization is executed only once. The first call
caches both the result and the "done" state, and later callers reuse the
saved result. A lock protects that cached states.
Those states and the lock are currently kept as function-local statics
because they are used only by try_init_module_global().
TDX module updates need to reset the cached states so TDX global
initialization can be run again after an update. That will add another
access site in the same file.
Move the cached states to file scope so it is accessible outside
try_init_module_global(), and move the lock along with the states it
protects.
No functional change intended.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-3-chao.gao@intel.com
TDX module global initialization is executed only once. The first call
caches both the return code and the "done" state in static function
variables. Later callers read the variables. A lock protects the
saved state and serializes callers.
These variables will soon be moved to a global structure. Prepare for
that by treating the variables as a unit. Assign them together and
limit accesses to while the lock is held.
[ dhansen: mostly rewrite changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-2-chao.gao@intel.com
Merge the final part of the GHCB 7.2 fixes at
https://lore.kernel.org/kvm/20260529183549.1104619-1-pbonzini@redhat.com/.
Patches 1-17 have already been included in Linux 7.1; these are minor
cleanups, and fixes for behaviors that are suboptimal or contradicting
the specification.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that only two case-statements actually need a local "ret" variable,
refactor sev_handle_vmgexit() to have all flows return directly when
possible, and bury "ret" as "r" in the two paths that need to propagate a
return value from a helper.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-25-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that sev_es_validate_vmgexit() is only responsible for checking that
all required GHCB fields are marked valid, turn it into a predicate whose
name reflects exactly that.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-24-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle unknown #VMGEXIT reasons in sev_handle_vmgexit(), not in
sev_es_validate_vmgexit(). This makes it _much_ more obvious that KVM
simply funnels "legacy" exits to the standard SVM interception handlers,
and is the final preparatory change needed to reduce the scope of
sev_es_validate_vmgexit().
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-23-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return INVALID_INPUT, not MISSING_INPUT, if the guest provides an unaligned
address for a GUEST_REQUEST, and/or attempts to use the same page for the
source and destination. The inputs are obviously invalid, not missing.
Opportunistically move the checks out of sev_es_validate_vmgexit(), to
continue the march towards reducing the scope of the helper, and to help
guide future changes into correctly handling bad input.
Fixes: 88caf544c9 ("KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event")
Fixes: 74458e4859 ("KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-22-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signal INVALID_EVENT, not MISSING_INPUT, if a non-SNP guest attempts to
invoke an SNP-only #VMGEXIT. Opportunistically move the checks out of
sev_es_validate_vmgexit() to continue the march towards making said helper
a predicate whose sole purpose is to verify the guest has marked required
GHCB fields as valid.
Fixes: e366f92ea9 ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Fixes: 9b54e248d2 ("KVM: SEV: Add support to handle Page State Change VMGEXIT")
Fixes: 88caf544c9 ("KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event")
Fixes: 74458e4859 ("KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-21-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the check to verify the guest's requested GHCB out of
sev_es_validate_vmgexit() as the first step towards making said helper a
predicate whose sole purpose is to verify the guest has marked required
GHCB fields as valid.
Using a single "validate" helper sounds good on paper, but in practice it's
difficult to verify that KVM is performing the necessary sanity checks (the
usage of state is far removed from the relevant checks), makes it difficult
to understand that "legacy" exits are simply routed to KVM's existing exit
handlers, and most importantly, has directly contributed to a number of
bugs as adding case-statements to the validation subtly removes them from
the default path that rejects unknown exit codes with INVALID_EVENT.
Deliberately extract the usage code check first so as to preserve the order
of KVM's checks, even though future code extraction will technically fix
bugs.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-20-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest attempts a non-MSR #VMGEXIT without the registered GHCB,
return a GHCB_HV_RESP_MALFORMED_INPUT+GHCB_ERR_NOT_REGISTERED error to the
guest instead of exiting KVM_RUN with -EINVAL (and in likelihood killing
the VM). KVM has already mapped the requested GHCB, i.e. can cleanly
report an error, and so exiting with -EINVAL is completely unjustified.
Fixes: 0c76b1d082 ("KVM: SEV: Add support to handle GHCB GPA register VMGEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For non-sec2 it is only required to wait for GSP falcon to halt. This is
because GSP does the main work of unloading on GPUs not using sec2.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
[ jhubbard: use Result instead of Result<()> in the UnloadBundle impl ]
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-8-d9f3a06939e0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
On Hopper and Blackwell, FSP boots GSP with hardware lockdown enabled.
After FSP Chain of Trust completes, the driver must poll for lockdown
release before proceeding with GSP initialization. Add the register
bit and helper functions needed for this polling.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-7-d9f3a06939e0@nvidia.com
[acourbot: fix `lockdown_released` logic and add explanatory comments.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Build and send the Chain of Trust message to FSP, bundling the
DMA-coherent boot parameters that FSP reads at boot time.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-6-d9f3a06939e0@nvidia.com
[acourbot: rename `frts_offset` to `frts_vidmem_offset`.]
[acourbot: add note about frts_sysmem_* CoT members.]
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Unmap and unpin the GHCB as needed when freeing a vCPU. If the VM is
destroyed after mapping+pinning the GHCB on #VMGEXIT, without re-running
the vCPU, KVM will effectively leak the GHCB and any mappings created for
the GHCB.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Decouple synchronizing the GHCB SA from freeing/unpinning the SA, so that
the free/unpin path can be reused when freeing a vCPU.
Opportunistically add a WARN to harden KVM against stomping over (and thus
leaking) an already-allocated scratch area.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relocate sev_free_vcpu() down in sev.c so that it's definition comes after
sev_es_unmap_ghcb(). This will allow sharing unmap functionality between
the two functions without needing a forward declaration (or weird placement
of the common code).
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant.
Reported-by: Michael Roth <michael.roth@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework Page State Change (PSC) handling to read the guest-provided start
and end indices exactly once, at the beginning of the request. Re-reading
the indices is "fine", _if_ the guest is well-behaved. KVM _should_ be
safe against concurrent guest modification of the indices, but there is
zero reason to introduce unnecessary risk.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "psc" struct to vcpu_sev_es_state to avoid having to prefix all of
the fields with "psc_".
Take advantage of the code churn to opportunistically rename local
variables to "guest_psc" to make it more obvious that the buffer is guest
data, and more importantly, guest accessible!
Opportunistically rename inflight => batch_size as well, because there can
really only be one operation in-flight (per-vCPU), i.e. "inflight" _looks_
like a boolean, but in actuality is an integer tracking how many pages are
being handled by the current operation.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Increment the guest-visible "cur_entry" index outside of the for-loop
when processing Page State Change entries, and add a comment to make it
more obvious which code is operating on trusted data, and which code is
touching guest-accessible data.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY
records when replaying version 0 restart tables.
During this conversion, the memmove() length is derived directly from
the on-disk lcns_follow field:
memmove(&dp->vcn, &dp0->vcn_low,
2 * sizeof(u64) +
le32_to_cpu(dp->lcns_follow) * sizeof(u64));
check_rstbl() validates restart table structure, but does not constrain
per-entry lcns_follow values relative to the entry size. A malformed
filesystem image can provide an oversized lcns_follow value, causing
the conversion memmove() to access memory beyond the bounds of the
allocated restart table buffer.
The same field is later used to bound iteration over page_lcns[],
so validating lcns_follow during conversion also prevents downstream
out-of-bounds access from the same malformed metadata.
Compute the maximum valid lcns_follow from the already-validated
restart table entry size and reject entries that exceed this bound.
Reuse the existing t16/t32 scratch variables already declared in
log_replay() to avoid introducing new declarations.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
[almaz.alexandrovich@paragon-software.com: fixed the conflicts]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In log_replay()'s analysis pass, after find_dp() returns a
valid DIR_PAGE_ENTRY for the (target_attr, target_vcn) tuple,
the copy_lcns block walks lrh->lcns_follow further entries:
t16 = le16_to_cpu(lrh->lcns_follow);
for (i = 0; i < t16; i++) {
size_t j = (size_t)(le64_to_cpu(lrh->target_vcn) -
le64_to_cpu(dp->vcn));
dp->page_lcns[j + i] = lrh->page_lcns[i];
}
find_dp() only validates that target_vcn falls within
[dp->vcn, dp->vcn + dp->lcns_follow), i.e., that the FIRST
cluster is covered. The walk through the further entries is
not bounded against dp->lcns_follow. For a malformed LRH
where target_vcn = dp->vcn + dp->lcns_follow - 1 and
lrh->lcns_follow > 1, the i > 0 writes overflow the dp's
allocated page_lcns[] array.
Add the missing j + lrh->lcns_follow <= dp->lcns_follow guard.
Reproduced under UML+KASAN on mainline 8d90b09e6741 as a
slab-out-of-bounds write of size 8 from log_replay+0x68d4 on
the mount path.
This is distinct from Pavitra Jha's 2026-05-02 patch
("fs/ntfs3: validate lcns_follow in log_replay conversion",
<20260502154252.164586-1-jhapavitra98@gmail.com>) which
addresses the separate version-0 dirty-page-table conversion
path's memmove(&dp->vcn, ...) call. The two fixes are
complementary; both should land.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes,
fixed conflicts]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In do_action()'s DeleteIndexEntryAllocation case, e->size comes
from an on-disk INDEX_BUFFER entry. When e->size makes
e + e->size point past hdr + hdr->used,
PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t
that is silently cast to a quasi-infinite size_t when passed
to memmove(). The memmove then walks past the destination
buffer.
The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543
already carries the corresponding guard:
if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize ||
Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) ||
used + esize > le32_to_cpu(hdr->total)) {
goto dirty_vol;
}
Apply the same shape to the allocation-path case. Also reject
esize == 0: memmove(e, e, ...) is a no-op and leaves
hdr->used unchanged, hiding a malformed entry from the
existing check_index_header() walk.
Reproduced under UML+KASAN on mainline 8d90b09e6741 by
mounting a crafted NTFS image: the unguarded memmove takes a
length of 0xffffffffffffff00 and the kernel oopses in
memmove+0x81/0x1a0 on the do_action+0x36a2 frame.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In do_action()'s UpdateResidentValue case (fslog.c:3307),
lrh->attr_off and lrh->redo_len come from the on-disk LRH.
When they satisfy aoff + dlen < attr->res.data_off, the
assignment
attr->res.data_size = cpu_to_le32(aoff + dlen - data_off);
underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1,
data_off=0x18). Subsequent code that reads attr->res.data_size
to walk the resident attribute payload would then read up to
4 GiB past the 1024-byte MFT record allocation.
The existing mi_enum_attr() defense in fs/ntfs3/record.c:287
catches the corrupted data_size on the next attribute walk
and fails the mount, but only on the path that walks all
attributes. A read site that picks an attribute by name and
reads its data_size without re-validating is not covered.
Validate aoff against data_off and asize at the source.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe: with aoff=0x10 and data_off=0x18, the
post-assignment data_size is 0xfffffff9 (mount then fails
at -22 from mi_enum_attr).
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The original byte-by-byte implementation with modulo checks is less
efficient. Refactor str2hashbuf_unsigned() and str2hashbuf_signed()
to process input in explicit 4-byte chunks instead of using a
modulus-based loop to emit words byte by byte.
Additionally, the use of function pointers for selecting the appropriate
str2hashbuf implementation has been removed. Instead, the functions are
directly invoked based on the hash type, eliminating the overhead of
dynamic function calls.
Performance test (x86_64, Intel Core i7-10700 @ 2.90GHz, average over 10000
runs, using kernel module for testing):
len | orig_s | new_s | orig_u | new_u
----+--------+-------+--------+-------
1 | 70 | 71 | 63 | 63
8 | 68 | 64 | 64 | 62
32 | 75 | 70 | 75 | 63
64 | 96 | 71 | 100 | 68
255 | 192 | 108 | 187 | 84
This change improves performance, especially for larger input sizes.
Signed-off-by: Guan-Chun Wu <409411716@gms.tku.edu.tw>
Link: https://patch.msgid.link/20260531080019.3794809-3-409411716@gms.tku.edu.tw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Introduce Kunit tests for fs/ext4/hash.c to verify ext4fs_dirhash()
across the legacy, half-MD4, and TEA hash variants.
The tests cover empty, seeded hashing, and non-ASCII name handling.
They also verify error paths, including invalid hash versions and
SipHash without a configured key, and check that the signed and
unsigned hash variants differ on non-ASCII input as expected.
When CONFIG_UNICODE is enabled, the tests further verify casefolded-name
hashing and the fallback behavior for invalid input.
Co-developed-by: Chen Hao Yu <edward062254@gmail.com>
Signed-off-by: Chen Hao Yu <edward062254@gmail.com>
Signed-off-by: Guan-Chun Wu <409411716@gms.tku.edu.tw>
Link: https://patch.msgid.link/20260531080019.3794809-2-409411716@gms.tku.edu.tw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In debug_dma_sync_sg_for_device(), when iterating over a scatterlist,
the debug entry population mistakenly uses the head of the scatterlist
'sg' to fetch the physical address via sg_phys(), instead of using the
current iterator variable 's'.
This causes dma-debug to track the physical address of the very first
scatterlist entry for all subsequent entries in the list.
Fix this by passing the correct loop iterator 's' to sg_phys()
Fixes: 9d4f645a1f ("dma-debug: store a phys_addr_t in struct dma_debug_entry")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260603123708.1665-1-lirongqing@baidu.com
Snapshot-based fast commit can fall back when the commit-time snapshot
cannot be built (e.g. extent status cache misses). It is useful to
quantify the updates-locked window and to see why snapshotting failed.
Add best-effort snapshot counters to the ext4 superblock and extend
/proc/fs/ext4/<sb_id>/fc_info to report the number of snapshotted
inodes and ranges, snapshot failure reasons, and the average/max time
spent with journal updates locked.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Link: https://patch.msgid.link/20260515091829.194810-8-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit-time fast commit snapshots run under jbd2_journal_lock_updates(),
so it is useful to quantify the time spent with updates locked and to
understand why snapshotting can fail.
Add a new tracepoint, ext4_fc_lock_updates, reporting the time spent in
the updates-locked window along with the number of snapshotted inodes
and ranges. Record the first snapshot failure reason in a stable snap_err
field for tooling.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260515091829.194810-7-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
