Commit graph

1,461,726 commits

Author SHA1 Message Date
Marco Crivellari
cc7bcbb5ad mmc: omap: add WQ_PERCPU to alloc_workqueue users
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.

alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.

This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.

This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:

commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")

This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.

With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.

Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 18:15:01 +01:00
Stefan Metzmacher
d93a89684d smb: client: let smbd_disconnect_rdma_connection() turn CREATED into DISCONNECTED
When smbd_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smbd_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in smbd_destroy() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.

So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.

Fixes: ffbfc73e84 ("smb: client: let smbd_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-11-11 11:05:35 -06:00
Marco Crivellari
070f0336d1 mmc: mtk-sd: replace use of system_wq with system_percpu_wq
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistency cannot be addressed without refactoring the API.

This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:

commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")

Replace system_wq with system_percpu_wq, keeping the same old behavior.
The old wq (system_wq) will be kept for a few release cycles.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 18:04:12 +01:00
Shawn Lin
5f87aaf5b6 mmc: core: Allow more host caps to be modified through debugfs
This makes various signal and function tests more convenient
without the need to modify the DTB.

/sys/kernel/debug/mmc0# echo $(($(cat caps) | (1 << 7))) > caps
/sys/kernel/debug/mmc0# echo on > /sys/bus/mmc/devices/mmc0\:0001/power/control
/sys/kernel/debug/mmc0# echo auto > /sys/bus/mmc/devices/mmc0\:0001/power/control

// Disable 8-bit support
echo $(($(cat caps) & ~(1 << 6))) > caps
// Enable 8-bit support
echo $(($(cat caps) | (1 << 6))) > caps
// Disable 4-bit support
echo $(($(cat caps) & ~(1 << 0))) > caps
// Enable 4-bit support
echo $(($(cat caps) | (1 << 0))) > caps
// Disable CMD23 support
echo $(($(cat caps) & ~(1 << 30))) > caps
// Enable CMD23 support
echo $(($(cat caps) | (1 << 30))) > caps
// Disable CMD23 support
echo $(($(cat caps) & ~(1 << 30))) > caps
// Enable CMD23 support
echo $(($(cat caps) | (1 << 30))) > caps
// Disable CQE support
echo $(($(cat caps2) & ~(1 << 23))) > caps2
// Enable CQE support
echo $(($(cat caps2) | (1 << 23))) > caps2
// Disable CQE DCMD support
echo $(($(cat caps2) & ~(1 << 24))) > caps2
// Enable CQE DCMD support
echo $(($(cat caps2) | (1 << 24))) > caps2

/sys/kernel/debug/mmc0# echo on > /sys/bus/mmc/devices/mmc0\:0001/power/control
/sys/kernel/debug/mmc0# cat ios

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:59:17 +01:00
Conor Dooley
1088d49b62 riscv: dts: microchip: enable qspi adc/mmc-spi-slot on BeagleV Fire
The BeagleV Fire has an SD card slot and an ADC connected to the QSPI
controller.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2025-11-11 16:58:53 +00:00
Haein Lee
632108ec07 ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.

This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.

This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor.

Fixes: 17156f23e9 ("ALSA: usb: add UAC3 BADD profiles support")
Signed-off-by: Haein Lee <lhi0729@kaist.ac.kr>
Link: https://patch.msgid.link/vwhzmoba9j2f.vwhzmob9u9e2.g6@dooray.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-11-11 17:57:44 +01:00
Conor Dooley
66c6ceb41e MAINTAINERS: rename Microchip RISC-V entry
There's now non-FPGA RISC-V SoCs from Microchip, so rename the entry
to reflect that.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2025-11-11 16:52:30 +00:00
Conor Dooley
587c0a5e81 MAINTAINERS: add new soc drivers to Microchip RISC-V entry
Add the two new syscon drivers to the RISC-V entry for Microchip
platforms.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2025-11-11 16:52:30 +00:00
Shawn Lin
739f04f4a4 mmc: dw_mmc-rockchip: Fix wrong internal phase calculate
ciu clock is 2 times of io clock, but the sample clk used is
derived from io clock provided to the card. So we should use
io clock to calculate the phase.

Fixes: 59903441f5 ("mmc: dw_mmc-rockchip: Add internal phase support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:47:47 +01:00
Conor Dooley
781f60e45b reset: mpfs: add non-auxiliary bus probing
While the auxiliary bus was a nice bandaid, and meant that re-writing
the representation of the clock regions in devicetree was not required,
it has run its course. The "mss_top_sysreg" region that contains the
clock and reset regions, also contains pinctrl and an interrupt
controller, so the time has come rewrite the devicetree and probe the
reset controller from an mfd devicetree node, rather than implement
those drivers using the auxiliary bus. Wanting to avoid propagating this
naive/incorrect description of the hardware to the new pic64gx SoC is a
major motivating factor here.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2025-11-11 16:47:24 +00:00
Sebastian Reichel
fda1e0af7c mmc: sdhci-of-dwcmshc: Add command queue support for rockchip SOCs
This adds CQE support for the Rockchip RK3588 and RK3576 platform. To
be functional, the eMMC device-tree node must have a 'supports-cqe;'
flag property.

As the RK3576 device-tree has been upstreamed with the 'supports-cqe;'
property set by default, the kernel already tried to use CQE, which
results in system hang during suspend. This fixes the issue.

Co-developed-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:45:36 +01:00
Charan Pedumuru
eadea8e134 dt-bindings: mmc: socionext,milbeaut-m10v-sdhci-3.0: convert to DT schema
Convert SOCIONEXT Milbeaut SDHCI controller binding to YAML format.
Add a new property "voltage-ranges" to resolve dt_check errors.

Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:37:47 +01:00
Rakuram Eswaran
9e80562521 mmc: pxamci: Simplify pxamci_probe() error handling using devm APIs
This patch refactors pxamci_probe() to use devm-managed resource
allocation (e.g. devm_dma_request_chan) and dev_err_probe() for
improved readability and automatic cleanup on probe failure.

It also removes redundant NULL assignments and manual resource release
logic from pxamci_probe(), and eliminates the corresponding release
calls from pxamci_remove().

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202510041841.pRlunIfl-lkp@intel.com/
Fixes: 58c40f3faf ("mmc: pxamci: Use devm_mmc_alloc_host() helper")
Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:34:28 +01:00
Charan Pedumuru
262991d938 dt-bindings: mmc: ti,da830-mmc: convert to DT schema
Convert TI Highspeed MMC host controller binding to YAML format. Define
'clocks' and 'interrupts' properties to resolve errors identified by
'dt_check' and 'dtb_check'.

Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:31:49 +01:00
Huan He
32b2633219 mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700
Add support for the mmc controller in the Eswin EIC7700 with the new
compatible "eswin,eic7700-dwcmshc". Implement custom sdhci_ops for
set_clock, reset, set_uhs_signaling, platform_execute_tuning.

Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:29:12 +01:00
Huan He
30009a21f2 dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin EIC7700
EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.

Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11 17:29:12 +01:00
Shrikanth Hegde
65177ea9f6 sched/deadline: Minor cleanup in select_task_rq_dl()
In select_task_rq_dl, there is only one goto statement, there is no
need for it.

No functional changes.

Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20251014100342.978936-2-sshegde@linux.ibm.com
2025-11-11 17:27:55 +01:00
Shrikanth Hegde
b4bfacd392 sched/deadline: Use cpumask_weight_and() in dl_bw_cpus
cpumask_subset(a,b) -> cpumask_weight(a) should be same as cpumask_weight_and(a,b)
for_each_cpu_and(a,b) to count cpus could be replaced by cpumask_weight_and(a,b)

No Functional Change. It could save a few cycles since cpumask_weight_and
would be more efficient. Plus one less stack variable.

Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20251014100342.978936-3-sshegde@linux.ibm.com
2025-11-11 17:27:55 +01:00
Peter Zijlstra
2614069c59 sched/deadline: Document dl_server
Place the notes that resulted from going through the dl_server code in a
comment.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2025-11-11 17:27:50 +01:00
Akinobu Mita
c42af83c59 memblock: fix memblock_estimated_nr_free_pages() for soft-reserved memory
memblock_estimated_nr_free_pages() returns the difference between the total
size of the "memory" memblock type and the "reserved" memblock type.

The "soft-reserved" memory regions are added to the "reserved" memblock
type, but not to the "memory" memblock type. Therefore,
memblock_estimated_nr_free_pages() may return a smaller value than
expected, or if it underflows, an extremely large value.

/proc/sys/kernel/threads-max is determined by the value of
memblock_estimated_nr_free_pages().  This issue was discovered on machines
with CXL memory because kernel.threads-max was either smaller than expected
or extremely large for the installed DRAM size.

This fixes the issue by replacing memblock_reserved_size() with
memblock_reserved_kern_size() that tells how much memory was
reserved from the actual RAM.

Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://patch.msgid.link/20251111010010.7800-1-akinobu.mita@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
2025-11-11 18:15:35 +02:00
Yiqi Sun
ed6612165b smb: fix invalid username check in smb3_fs_context_parse_param()
Since the maximum return value of strnlen(..., CIFS_MAX_USERNAME_LEN)
is CIFS_MAX_USERNAME_LEN, length check in smb3_fs_context_parse_param()
is always FALSE and invalid.

Fix the comparison in if statement.

Signed-off-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-11-11 10:01:47 -06:00
Laurentiu Mihalcea
fdc1dc7dd5 clk: imx: add driver for imx8ulp's sim lpav
The i.MX8ULP System Integration Module (SIM) LPAV module is a block
control module found inside the LPAV subsystem, which offers some clock
gating options and reset line assertion/de-assertion capabilities.

Therefore, the clock gate management is supported by registering the
module's driver as a clock provider, while the reset capabilities are
managed via the auxiliary device API to allow the DT node to act as a
reset and clock provider.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-4-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-11 18:01:25 +02:00
Laurentiu Mihalcea
3b521bf8c5 dt-bindings: clock: document 8ULP's SIM LPAV
Add documentation for i.MX8ULP's SIM LPAV module.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-11 18:01:22 +02:00
Stefan Metzmacher
55286b1e1b smb: server: let smb_direct_disconnect_rdma_connection() turn CREATED into DISCONNECTED
When smb_direct_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smb_direct_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in free_transport() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.

So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.

Fixes: b3fd52a0d8 ("smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-11-11 09:50:35 -06:00
Gabor Juhos
186b8f8fcc soc: qcom: mdt_loader: rename 'firmware' parameter of qcom_mdt_load()
In the 'mdt_loader.h' header, both the prototype and the inline
version of the qcom_mdt_load() function uses 'fw_name' as name for
the firmware name parameter. Additionally, the other qcom_mdt_*
functions are using that as well.

For consistency, rename the 'firmware' parameter in the implementation
of the qcom_mdt_load() to 'fw_name' and update the function accordingly.

No functional changes.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-mdt-loader-cleanup-v1-2-71afee094dce@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-11 09:48:57 -06:00
Gabor Juhos
0cda8823b1 soc: qcom: mdt_loader: merge __qcom_mdt_load() and qcom_mdt_load_no_init()
The qcom_mdt_load_no_init() function is just a simple wrapper around
of __qcom_mdt_load(). Since commit 0daf35da39 ("soc: qcom: mdt_loader:
Remove pas id parameter") both functions are using the same type of
parameters and providing the same functionality.

Keeping two functions for the same purpose is superfluous, so rename
the __qcom_mdt_load() function to qcom_mdt_load_no_init() and remove
the wrapper.

No functional changes.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111-mdt-loader-cleanup-v1-1-71afee094dce@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-11 09:48:56 -06:00
Borislav Petkov (AMD)
b2c1dd6c6f x86/coco/sev: Convert has_cpuflag() to use cpu_feature_enabled()
Drop one redundant definition, while at it.

There should be no functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251031122122.GKaQSpwhLvkinKKbjG@fat_crate.local
2025-11-11 16:42:31 +01:00
Sean Christopherson
dfd1572a64 KVM: VMX: Make loaded_vmcs_clear() static in vmx.c
Make loaded_vmcs_clear() local to vmx.c as there are no longer any
external callers.

No functional change intended.

Link: https://patch.msgid.link/20251106205114.218226-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-11 07:41:16 -08:00
Kriish Sharma
6d7e3870af blk-mq-dma: fix kernel-doc function name for integrity DMA iterator
Documentation build reported:

  Warning: block/blk-mq-dma.c:373 expecting prototype for blk_rq_integrity_dma_map_iter_start(). Prototype was for blk_rq_integrity_dma_map_iter_next() instead

The kernel-doc comment above `blk_rq_integrity_dma_map_iter_next()` used
the wrong function name (`blk_rq_integrity_dma_map_iter_start`) in its
header. This patch corrects the function name in the kernel-doc block to
match the actual implementation, ensuring clean documentation builds.

Fixes: fec9b16dc5 ("blk-mq-dma: add scatter-less integrity data DMA mapping")
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-11 08:37:33 -07:00
Keith Busch
fd9ecd0052 block: fix merging data-less bios
The data segment gaps the block layer tracks doesn't apply to bio's that
don't have data. Skip calculating this to fix a NULL pointer access.

Fixes: 2f6b2565d4 ("block: accumulate memory segment gaps per bio")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-11 08:35:59 -07:00
Alok Singh
7cd7392a07 wifi: ath12k: Remove Wi-Fi 7 header dependencies from common ath12k module
Remove all remaining Wi-Fi 7 header dependencies from dp_mon.c to
finalize separation of Wi-Fi 7 specific monitor mode functionality.

Remove these includes from dp_mon.c:
- wifi7/hal_desc.h
- wifi7/hal_qcn9274.h
- wifi7/dp_rx.h

Relocate hal_mon_buf_ring from wifi7/hal_desc.h to hal.h.

Relocate HAL_RX_UL_OFDMA_USER_INFO_V0_W0_VALID and HAL_RX_FCS_LEN
macros from wifi7/hal_rx.h to hal.h or dp_rx.h as appropriate.

Move the following functions to the new file wifi7/dp_mon.c
and add the ath12k_wifi7 prefix:
- ath12k_dp_mon_rx_merg_msdus()
- ath12k_dp_mon_update_radiotap()
- ath12k_dp_mon_rx_deliver_msdu()
- ath12k_dp_mon_get_buf_len()
- ath12k_dp_mon_rx_deliver()

Export several helper functions needed by the ath12k_wifi7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-13-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:34 -08:00
Alok Singh
965aea9154 wifi: ath12k: Move MSDU END TLV processing to Wi-Fi 7 module
Separate Wi-Fi 7-specific monitor handling from ath12k common code to
improve modularity.

Move the following MSDU END TLV processing functions into wifi7/dp_mon.c
and rename them with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_parse_rx_msdu_end_err()
- ath12k_dp_mon_parse_status_msdu_end()
- ath12k_dp_mon_next_link_desc_get()

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-12-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:34 -08:00
Alok Singh
5db19c4884 wifi: ath12k: Move MU user processing to Wi-Fi 7 module
Move Wi-Fi 7-specific monitor functionality out of ath12k common code
into the Wi-Fi 7 module to improve modularity.

Move and rename the following MU user processing functions to
wifi7/dp_mon.c with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_rx_handle_ofdma_info()
- ath12k_dp_mon_rx_populate_mu_user_info()
- ath12k_dp_mon_hal_rx_parse_user_info()

Move the helper functions hal_rx_mon_hal_ru_size_to_ath12k_ru_size and
hal_rx_ul_ofdma_ru_size_to_width to the Wi-Fi 7 module, and export the
helpers required by the ath12k_wifi7 code. Isolate the parsing of
MU-specific user information within the Wi-Fi 7 module to keep
common code generic.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-11-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
e5419861e4 wifi: ath12k: Move remaining SIG TLV parsing to Wi-Fi 7 module
The ath12k common monitor path still contains Wi-Fi 7 specific
SIG TLV parsing. Move these SIG TLV parsing to the Wi-Fi 7
module to improve modularity.

Relocate the following functions into wifi7/dp_mon.c and
rename them with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_parse_l_sig_b()
- ath12k_dp_mon_parse_l_sig_a()
- ath12k_dp_mon_hal_rx_parse_u_sig_cmn()
- ath12k_dp_mon_hal_rx_parse_u_sig_tb()
- ath12k_dp_mon_hal_rx_parse_u_sig_mu()
- ath12k_dp_mon_hal_rx_parse_u_sig_hdr()

Export the helper symbols needed by the Wi-Fi 7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-10-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
00b67b7c44 wifi: ath12k: Move EHT SIG processing to Wi-Fi 7 module
Split Wi-Fi 7 specific EHT SIG parsing out of ath12k common
code into the Wi-Fi 7 module to improve modularity.

Move the following EHT SIG processing functions to wifi7/dp_mon.c and
add the ath12k_wifi7 prefix to each relocated function.
- ath12k_dp_mon_hal_aggr_tlv()
- ath12k_dp_mon_hal_rx_is_frame_type_ndp()
- ath12k_dp_mon_hal_rx_is_non_ofdma()
- ath12k_dp_mon_hal_rx_is_ofdma()
- ath12k_dp_mon_hal_rx_parse_eht_sig_ndp()
- ath12k_dp_mon_hal_rx_parse_usig_overflow()
- ath12k_dp_mon_hal_rx_parse_non_ofdma_users()
- ath12k_dp_mon_hal_rx_parse_eht_mumimo_user()
- ath12k_dp_mon_hal_rx_parse_eht_non_mumimo_user()
- ath12k_dp_mon_hal_rx_is_mu_mimo_user()
- ath12k_dp_mon_hal_rx_parse_eht_sig_non_ofdma()
- ath12k_dp_mon_hal_rx_parse_ru_allocation()
- ath12k_dp_mon_hal_rx_parse_eht_sig_ofdma()
- ath12k_dp_mon_parse_eht_sig_hdr()

Export helper functions needed by the ath12k_wifi7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-9-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
dde5748c29 wifi: ath12k: Move HE SIG processing to Wi-Fi 7 module
Separate Wi-Fi 7-specific monitor code from ath12k common code to
improve modularity.

Move following HE SIG processing functions to the wifi7/dp_mon.c and
rename the relocated functions with the ath12k_wifi7 prefix:
- ath12k_dp_mon_parse_he_sig_b2_ofdma()
- ath12k_dp_mon_parse_he_sig_b2_mu()
- ath12k_dp_mon_parse_he_sig_b1_mu()
- ath12k_dp_mon_parse_he_sig_mu()
- ath12k_dp_mon_parse_he_sig_su()

Export helper functions required by the ath12k_wifi7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-8-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
f4bcbaebf4 wifi: ath12k: Move HT/VHT SIG processing to Wi-Fi 7 module
Separate Wi-Fi 7-specific monitor parsing from ath12k common code
to improve modularity and keep Wi-Fi 7 logic within the Wi-Fi 7 module.

Move following HT/VHT SIG parsing functions to wifi7/dp_mon.c and
rename the functions with the ath12k_wifi7 prefix:
- ath12k_dp_mon_parse_vht_sig_a()
- ath12k_dp_mon_parse_ht_sig()

Export helper functions required by the ath12k_wifi7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-7-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
52758ff7b5 wifi: ath12k: Move TX monitor functionality to Wi-Fi 7 module
Separate Wi-Fi 7-specific TX monitor functionality from ath12k
common code to improve modularity and maintainability.

Move following TX monitor processing functions to wifi7/dp_mon.c and
rename the functions with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_tx_get_ppdu_info()
- ath12k_dp_mon_hal_tx_ppdu_info()
- ath12k_dp_mon_tx_alloc_skb()
- ath12k_dp_mon_tx_gen_cts2self_frame()
- ath12k_dp_mon_tx_gen_rts_frame()
- ath12k_dp_mon_tx_gen_3addr_qos_null_frame()
- ath12k_dp_mon_tx_gen_4addr_qos_null_frame()
- ath12k_dp_mon_tx_gen_ack_frame()
- ath12k_dp_mon_tx_gen_prot_frame()
- ath12k_dp_mon_tx_parse_status_tlv()
- ath12k_dp_mon_tx_status_get_num_user()
- ath12k_dp_mon_tx_process_ppdu_info()
- ath12k_dp_mon_tx_parse_mon_status()

Export helper functions required by the ath12k_wifi7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-6-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
e475119ba2 wifi: ath12k: Move RX status TLV parsing to Wi-Fi 7 module
Split Wi-Fi 7-specific monitor code out of ath12k common code
to improve modularity.

Move following RX status TLV parsing functions to the new file
wifi7/dp_mon.c and rename the helpers with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_rx_parse_status_tlv()
- ath12k_dp_mon_parse_rx_dest_tlv()

Export helper functions required by the Wi-Fi 7 module.

Temporarily include wifi7/hal_rx.h from dp_mon.h to provide
HAL structure definitions; remove this dependency in a later patch.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-5-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:33 -08:00
Alok Singh
906b5ac9c2 wifi: ath12k: Move MPDU pop functionality to Wi-Fi 7 module
Separate Wi-Fi 7-specific monitor code from ath12k common
code to improve modularity.

Move the following monitor MPDU pop function to the new
file wifi7/dp_mon.c and rename them with the ath12k_wifi7_ prefix:
- ath12k_dp_rx_mon_mpdu_pop()

Export helper functions required by the ath12k_wifi7 module.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-4-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:32 -08:00
Alok Singh
e00164657c wifi: ath12k: Move monitor status processing to Wi-Fi 7 module
Split Wi-Fi 7-specific monitor status processing out of ath12k common
code and into the Wi-Fi 7 module to improve modularity.

Move the following functions to wifi7/dp_mon.c and rename them with the
ath12k_wifi7_ prefix:
- ath12k_dp_mon_rx_parse_mon_status()
- ath12k_dp_rx_reap_mon_status_ring()
- ath12k_dp_mon_parse_rx_dest()
- ath12k_dp_rx_mon_buf_done()
- ath12k_dp_rx_mon_dest_process()
- ath12k_dp_mon_rx_memset_ppdu_info()

Export helper functions required by the Wi-Fi 7 monitor path.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-3-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:32 -08:00
Alok Singh
24b21a9be2 wifi: ath12k: Move monitor ring processing to Wi-Fi 7 module
Separate Wi-Fi 7-specific monitor-mode processing from common
ath12k data path code to improve modularity.

Move monitor status ring processing to wifi7/dp_mon.c:
- ath12k_dp_mon_srng_process()
- __ath12k_dp_mon_process_ring()
- ath12k_dp_mon_process_ring()

Rename the above to use the ath12k_wifi7_ prefix and
export helper functions required by the ath12k_wifi7 module.
Update the Wi-Fi 7 module Makefile to build dp_mon.o.

No functional changes are intended; this is preparatory refactoring
to isolate Wi-Fi 7 monitor-mode code from shared ath12k code.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-2-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-11 07:21:32 -08:00
YangWen
aee4d5a521
ntfs3: fix double free of sbi->options->nls and clarify ownership of fc->fs_private
commit 02f312754c ("ntfs3: fix use-after-free of sbi->options in cmp_fnames") introduced a use-after-free bug
due to improper handling of sbi->options in error paths. This resulted in crashes when superblock cleanup
is performed in ntfs_put_super.

This patch ensures that the options structure and its subfields are properly freed, preventing the memory
corruption and use-after-free errors.

Fixes: 02f312754c ("ntfs3: fix use-after-free of sbi->options in cmp_fnames")
Reported-by: syzbot+cc433e4cd6d54736bf80@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc433e4cd6d54736bf80
Signed-off-by: YangWen <anmuxixixi@gmail.com>
[almaz.alexandrovich@paragon-software.com: added fixes and closes tags]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2025-11-11 16:08:18 +01:00
Bartlomiej Kubik
a8a3ca23bb
fs/ntfs3: Initialize allocated memory before use
KMSAN reports: Multiple uninitialized values detected:

- KMSAN: uninit-value in ntfs_read_hdr (3)
- KMSAN: uninit-value in bcmp (3)

Memory is allocated by __getname(), which is a wrapper for
kmem_cache_alloc(). This memory is used before being properly
cleared. Change kmem_cache_alloc() to kmem_cache_zalloc() to
properly allocate and clear memory before use.

Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Fixes: 78ab59fee0 ("fs/ntfs3: Rework file operations")
Tested-by: syzbot+332bd4e9d148f11a87dc@syzkaller.appspotmail.com
Reported-by: syzbot+332bd4e9d148f11a87dc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=332bd4e9d148f11a87dc

Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Fixes: 78ab59fee0 ("fs/ntfs3: Rework file operations")
Tested-by: syzbot+0399100e525dd9696764@syzkaller.appspotmail.com
Reported-by: syzbot+0399100e525dd9696764@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0399100e525dd9696764

Reviewed-by: Khalid Aziz <khalid@kernel.org>
Signed-off-by: Bartlomiej Kubik <kubik.bartlomiej@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2025-11-11 16:08:02 +01:00
Joanne Koong
bd5603eaae fuse: fix readahead reclaim deadlock
Commit e26ee4efbc ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:

>>> stack_trace(1504735)
 folio_wait_bit_common (mm/filemap.c:1308:4)
 folio_lock (./include/linux/pagemap.h:1052:3)
 truncate_inode_pages_range (mm/truncate.c:336:10)
 fuse_evict_inode (fs/fuse/inode.c:161:2)
 evict (fs/inode.c:704:3)
 dentry_unlink_inode (fs/dcache.c:412:3)
 __dentry_kill (fs/dcache.c:615:3)
 shrink_kill (fs/dcache.c:1060:12)
 shrink_dentry_list (fs/dcache.c:1087:3)
 prune_dcache_sb (fs/dcache.c:1168:2)
 super_cache_scan (fs/super.c:221:10)
 do_shrink_slab (mm/shrinker.c:435:9)
 shrink_slab (mm/shrinker.c:626:10)
 shrink_node (mm/vmscan.c:5951:2)
 shrink_zones (mm/vmscan.c:6195:3)
 do_try_to_free_pages (mm/vmscan.c:6257:3)
 do_swap_page (mm/memory.c:4136:11)
 handle_pte_fault (mm/memory.c:5562:10)
 handle_mm_fault (mm/memory.c:5870:9)
 do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
 handle_page_fault (arch/x86/mm/fault.c:1481:3)
 exc_page_fault (arch/x86/mm/fault.c:1539:2)
 asm_exc_page_fault+0x22/0x27

Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()).

Fixes: e26ee4efbc ("fuse: allocate ff->release_args only if release is needed")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-11-11 16:04:45 +01:00
Peng Fan
9d97a2fe48 clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code
Use helper function devm_auxiliary_device_create() to remove some
boilerplate code.

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20251024-auxiliary-v2-1-a353dc9e6b1a@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-11 17:04:00 +02:00
Jacky Bai
25b47635f8 clk: imx: Add some delay before deassert the reset
Some of the PCCs on i.MX8ULP have a sw_rst bit to control the peripheral
reset through SW method. For peripherals like GPU that need sync reset,
some delay is necessary befere & after release the reset to make sure the
HW is reset into a known status. So add some delay before & after release
reset.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250801072153.1974428-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-11 17:02:01 +02:00
Nicolas Schier
7bade3f7e9
scripts: headers_install.sh: Remove two outdated config leak ignore entries
Remove config leak ignore entries for arch/arc/include/uapi/asm/page.h
as they have been removed in commit d3e5bab923 ("arch: simplify
architecture specific page size configuration").

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251105-update-headers-install-config-leak-ignore-list-v1-1-40be3eed68cb@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
2025-11-11 16:01:13 +01:00
Caleb Sander Mateos
727a440278 ublk: return unsigned from ublk_{,un}map_io()
ublk_map_io() and ublk_unmap_io() never return negative values, and
their return values are stored in variables of type unsigned. Clarify
that they can't fail by making their return types unsigned.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-11 07:57:20 -07:00
Caleb Sander Mateos
6b0a29933f ublk: remove unnecessary checks in ublk_check_and_get_req()
ub = iocb->ki_filp->private_data cannot be NULL, as it's set in
ublk_ch_open() before it returns succesfully. req->mq_hctx cannot be
NULL as any inflight ublk request must belong to some queue. And
req->mq_hctx->driver_data cannot be NULL as it's set to the ublk_queue
pointer in ublk_init_hctx(). So drop the unnecessary checks.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-11 07:57:05 -07:00