Commit graph

1,461,726 commits

Author SHA1 Message Date
Maxime Ripard
618c234740
drm/atomic: Convert drm_atomic_get_plane_state() to use new plane state
The drm_atomic_get_plane_state() function calls the deprecated
drm_atomic_get_existing_plane_state() helper to get find if a plane
state had already been allocated and was part of the given
drm_atomic_state.

At the point in time where drm_atomic_get_plane_state() can be called
(ie, during atomic_check), the existing state is the new state and
drm_atomic_get_existing_plane_state() can thus be replaced by
drm_atomic_get_new_plane_state().

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-5-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-10-06 13:59:05 +02:00
Maxime Ripard
6b592431c5
drm/atomic: Convert __drm_atomic_get_current_plane_state() to modern accessor
The __drm_atomic_get_current_plane_state() function tries to get and
return the existing plane state, and if it doesn't exist returns the one
stored in the drm_plane->state field.

Using the current nomenclature, it tries to get the existing plane state
with an ad-hoc implementation of drm_atomic_get_existing_plane_state(),
and falls back to either the old or new plane state, depending on
whether it is called before or after drm_atomic_helper_swap_state().

The existing plane state itself is deprecated, because it also changes
when swapping states from the new state to the old state.

Fortunately for us, we can simplify things. Indeed,
__drm_atomic_get_current_plane_state() is only used in two macros:
intel_atomic_crtc_state_for_each_plane_state and
drm_atomic_crtc_state_for_each_plane_state().

The intel variant is only used through the intel_wm_compute() function
that is only ever called in intel_crtc_atomic_check().

The generic variant is more widely used, and can be found in the malidp,
msm, tegra and vc4 drivers. All of these call sites though are during
atomic_check(), so we end up in the same situation than Intel's.

Thus, we only ever use the existing state as the new state, and
plane->state is always going to be the old state. Any plane isn't
guaranteed to be part of the state though, so we can't rely on
drm_atomic_get_old_plane_state() and we still need to use plane->state.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-4-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-10-06 13:59:05 +02:00
Maxime Ripard
9525f537ce
drm/atomic: Document __drm_connectors_state state pointer
While the old and new state pointers are somewhat self-explanatory, the
state pointer and its relation to the other two really isn't.

Now that we've cleaned up everything and it isn't used in any
modesetting path, we can document what it's still useful for: to free
the right state when we free the global state.

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-3-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-10-06 13:59:04 +02:00
Maxime Ripard
54cea7e655
drm/atomic: Remove unused drm_atomic_get_existing_connector_state()
The drm_atomic_get_existing_connector_state() function is deprecated and
isn't used anymore, so let's remove it.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-2-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-10-06 13:59:04 +02:00
Maxime Ripard
fa02f9b2ff
drm/atomic: Convert drm_atomic_get_connector_state() to use new connector state
The drm_atomic_get_connector_state() function calls a hand-rolled
implementation of the deprecated
drm_atomic_get_existing_connector_state() helper to get find if a
connector state had already been allocated and was part of the given
drm_atomic_state.

At the point in time where drm_atomic_get_connector_state() can be
called (ie, during atomic_check), the existing state is the new state
and drm_atomic_get_existing_connector_state() can thus be replaced by
drm_atomic_get_new_connector_state().

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # on imx8mp
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-1-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-10-06 13:58:53 +02:00
Chia-I Wu
4e04683022 drm/panthor: add custom ASN_HASH support for mt8196
Add panthor_soc_data to control custom ASN_HASH. Add compatible string
for "mediatek,mt8196-mali" and enable custom ASN_HASH for the soc.

Without custom ASN_HASH, FW fails to boot

  panthor 48000000.gpu: [drm] *ERROR* Unhandled Page fault in AS0 at VA 0x0000000000000000
  panthor 48000000.gpu: [drm] *ERROR* Failed to boot MCU (status=fatal)
  panthor 48000000.gpu: probe with driver panthor failed with error -110

With custom ASN_HASH, panthor probes fine and userspace boots to ui just
fine as well

  panthor 48000000.gpu: [drm] clock rate = 0
  panthor 48000000.gpu: EM: created perf domain
  panthor 48000000.gpu: [drm] Mali-G925-Immortalis id 0xd830 major 0x0 minor 0x1 status 0x5
  panthor 48000000.gpu: [drm] Features: L2:0x8130306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
  panthor 48000000.gpu: [drm] shader_present=0xee0077 l2_present=0x1 tiler_present=0x1
  panthor 48000000.gpu: [drm] Firmware protected mode entry not be supported, ignoring
  panthor 48000000.gpu: [drm] Firmware git sha: 27713280172c742d467a4b7d11180930094092ec
  panthor 48000000.gpu: [drm] CSF FW using interface v3.13.0, Features 0x10 Instrumentation features 0x71
  [drm] Initialized panthor 1.5.0 for 48000000.gpu on minor 1

Note that the clock and the regulator drivers are not upstreamed yet.
They might as well take a different form when upstreamed.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250913002155.1163908-3-olvaffe@gmail.com
2025-10-06 10:50:59 +01:00
Chia-I Wu
4b478288ca dt-bindings: gpu: mali-valhall-csf: add MediaTek MT8196 compatible
MediaTek MT8196 has Mali-G925-Immortalis GPU. panthor drm driver gained
support for it recently.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250913002155.1163908-2-olvaffe@gmail.com
2025-10-06 10:50:52 +01:00
Ran Xiaokai
83d59d81b2 slab: Fix using this_cpu_ptr() in preemptible context
defer_free() maybe called in preemptible context, this will trigger the
below warning message:

BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is defer_free+0x1b/0x60
Call Trace:
 <TASK>
 dump_stack_lvl+0xac/0xc0
 check_preemption_disabled+0xbe/0xe0
 defer_free+0x1b/0x60
 kfree_nolock+0x1eb/0x2b0
 alloc_slab_obj_exts+0x356/0x390
 __alloc_tagging_slab_alloc_hook+0xa0/0x300
 __kmalloc_cache_noprof+0x1c4/0x5c0
 __set_page_owner+0x10d/0x1c0
 post_alloc_hook+0x84/0xf0
 get_page_from_freelist+0x73b/0x1380
 __alloc_frozen_pages_noprof+0x110/0x2c0
 alloc_pages_mpol+0x44/0x140
 alloc_slab_page+0xac/0x150
 allocate_slab+0x78/0x3a0
 ___slab_alloc+0x76b/0xed0
 __slab_alloc.constprop.0+0x5a/0xb0
 __kmalloc_noprof+0x3dc/0x6d0
 __list_lru_init+0x6c/0x210
 alloc_super+0x3b6/0x470
 sget_fc+0x5f/0x3a0
 get_tree_nodev+0x27/0x90
 vfs_get_tree+0x26/0xc0
 vfs_kern_mount.part.0+0xb6/0x140
 kern_mount+0x24/0x40
 init_pipe_fs+0x4f/0x70
 do_one_initcall+0x62/0x2e0
 kernel_init_freeable+0x25b/0x4b0
 kernel_init+0x1a/0x1c0
 ret_from_fork+0x290/0x2e0
 ret_from_fork_asm+0x11/0x20
</TASK>

Disable preemption in defer_free() and also defer_deactivate_slab() to
make it safe.

[vbabka@suse.cz: disable preemption instead of using raw_cpu_ptr() per
 the discussion ]
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Link: https://lore.kernel.org/r/20250930083402.782927-1-ranxiaokai627@163.com
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2025-10-06 11:16:51 +02:00
Piotr Piórkowski
8462d16d1b drm/xe: Combine userspace context check
Both vm->xef and XE_LRC_CREATE_USER_CTX indicate in xe_lrc_init that
the context originates from userspace. However, XE_LRC_CREATE_USER_CTX
has a broader scope as it may be set even when no vm->xef is present.
The XE_BO_FLAG_PINNED_LATE_RESTORE flag can be extended to both cases,
so there is no point in handling the two cases separately.
Let's combine vm->xef and XE_LRC_CREATE_USER_CTX checks to detect
userspace context.

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-6-piotr.piorkowski@intel.com
2025-10-06 08:33:52 +02:00
Piotr Piórkowski
b48140f446 drm/xe/pf: Force use user VRAM for LMEM provisioning
The LMEM assigned to VFs should be allocated from the general-purpose
VRAM pool, not from the kernel-reserved region.
Let's force the use of general-purpose VRAM for BOs intended for VFs.

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-5-piotr.piorkowski@intel.com
2025-10-06 08:33:51 +02:00
Piotr Piórkowski
3f6cd669d5 drm/xe: Force user context allocations in user VRAM
In general, kernel structures should be allocated in the kernel-dedicated
VRAM region. However, userspace context data - while used by the kernel -
does not need to reside there.
Let's force the allocation of such data in the general-purpose VRAM region
accessible to userspace.

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-4-piotr.piorkowski@intel.com
2025-10-06 08:33:49 +02:00
Piotr Piórkowski
9d290ab0b5 drm/xe: Introduce new BO flag XE_BO_FLAG_FORCE_USER_VRAM
When using a separate VRAM region for kernel allocations,
some kernel structures, such as context userspace data,
should not reside in the VRAM region dedicated to the kernel.
The VRAM kernel region is intended only for allocations necessary
for driver operation. Allocations created via ioctl are long-lived
and not easily evictable. If this region runs out of space,
there may not be a fallback, which could cause failures.
To prevent this, add a new BO flag that explicitly forces the BO to be
allocated in the general-purpose VRAM region accessible to userspace,
avoiding the kernel-only VRAM region.

v2:
 - update commit message (Matthew)

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-3-piotr.piorkowski@intel.com
2025-10-06 08:33:48 +02:00
Piotr Piórkowski
db7dde9904 drm/xe: Add initial support for separate kernel VRAM region on the tile
So far, kernel and userspace allocations have shared the same VRAM region.
However, in some scenarios, it may be necessary to reserve a separate
VRAM area exclusively for kernel allocations.
Let's add preliminary support for such a configuration.

v2:
- replaced for_each_bo_flag_vram with the improved
  for_each_set_bo_vram_flag helper (Matthew)
- moved the VRAM flag iteration macro definition into xe_bo.c (Matthew)
- drop unused bo_flgas from bo_vram_flags_to_vram_placement (Matthew)
- use hweight32 helper in __xe_bo_fixed_placement for readability
  (Matthew)
v3: remove unnecessary VRAM fixup id

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-2-piotr.piorkowski@intel.com
2025-10-06 08:33:46 +02:00
Linus Torvalds
fd94619c43 zonefs changes for 6.18
- Some comment spelling fixes (Xichao)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaOMrdwAKCRDdoc3SxdoY
 dkGVAP9z3BjpZIcK8DHWHnkQcy4dOuCt2MMSqn7skN6av+Ro/AEA/tOhqAKv1j5k
 Lgs1mLsyM2V7fsO2QhQ721DwO0caNAU=
 =yhUq
 -----END PGP SIGNATURE-----

Merge tag 'zonefs-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

Pull zonefs update from Damien Le Moal:

 - Some comment spelling fixes (Xichao)

* tag 'zonefs-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: correct some spelling mistakes
2025-10-05 20:45:49 -07:00
Linus Torvalds
4b616669d1 ata changes for 6.18
- Improve the DT bindings documentation for the highbanck, imx and
    xgene-ahci controllers (Krzysztof, Fabio, Rob).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaOMqsAAKCRDdoc3SxdoY
 dj/YAP99ErzH54Tr7Rjg3VtctK1aMpoVD1TOsFA2Dhm0AIXMVwD8DMXhXwk9mXGc
 5JQvxMzDbkhTYOqWKhFewrJfACkpdQM=
 =8u1H
 -----END PGP SIGNATURE-----

Merge tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Damien Le Moal:

 - Improve the DT bindings documentation for the highbanck, imx and
   xgene-ahci controllers (Krzysztof, Fabio, Rob)

* tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support
  dt-bindings: ata: imx: Document 'target-supply'
  dt-bindings: ata: highbank: Minor whitespace cleanup in example
2025-10-05 20:43:01 -07:00
Herbert Xu
c0d36727bf crypto: rng - Ensure set_ent is always present
Ensure that set_ent is always set since only drbg provides it.

Fixes: 77ebdabe8d ("crypto: af_alg - add extra parameters for DRBG interface")
Reported-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-10-06 10:17:07 +08:00
Herbert Xu
ca1354f799 Revert "crypto: testmgr - desupport SHA-1 for FIPS 140"
This reverts commit 9d50a25eeb.

Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Jon Kohler <jon@nutanix.com>
Link: https://lore.kernel.org/all/05b7ef65-37bb-4391-9ec9-c382d51bae4d@kernel.org/
Link: https://lore.kernel.org/all/26F8FCC9-B448-4A89-81DF-6BAADA03E174@nutanix.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-10-06 10:10:27 +08:00
Bruno Thomsen
87064da2db rtc: pcf2127: fix watchdog interrupt mask on pcf2131
When using interrupt pin (INT A) as watchdog output all other
interrupt sources need to be disabled to avoid additional
resets. Resulting INT_A_MASK1 value is 55 (0x37).

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250902182235.6825-1-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 23:30:10 +02:00
Harini T
e22f4d1321 rtc: zynqmp: Restore alarm functionality after kexec transition
During kexec reboots, RTC alarms that are fired during the kernel
transition experience delayed execution. The new kernel would eventually
honor these alarms, but the interrupt handlers would only execute after
the driver probe is completed rather than at the intended alarm time.

This is because pending alarm interrupt status from the previous kernel
is not properly cleared during driver initialization, causing timing
discrepancies in alarm delivery.

To ensure precise alarm timing across kexec transitions, enhance the
probe function to:
1. Clear any pending alarm interrupt status from previous boot.
2. Detect existing valid alarms and preserve their state.
3. Re-enable alarm interrupts for future alarms.

Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/r/20250730142110.2354507-1-harini.t@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 23:17:46 +02:00
Xianwei Zhao
f38bdd7309 rtc: amlogic-a4: Optimize global variables
Convert a global variable into a local one of aml_rtc_probe().

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250722-rtc-regmap-v2-1-58bc17187a11@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 23:11:00 +02:00
Tóth János
75b002a38d rtc: sd2405al: Add I2C address.
It is common to include the I2C address of the device in the source
file.

Signed-off-by: Tóth János <gomba007@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 22:51:06 +02:00
Alexandre Belloni
a5a19e80b2 rtc: Kconfig: move symbols to proper section
There is only one HID RTC, the following symbols are for on-SoC RTCs

Link: https://lore.kernel.org/r/20251005203048.3759240-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 22:44:51 +02:00
Alexandre Belloni
b650cf9108 rtc: optee: make optee_rtc_pm_ops static
Fix sparse warningg:
drivers/rtc/rtc-optee.c:714:1: sparse: sparse: symbol 'optee_rtc_pm_ops' was not
declared. Should it be static?

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509230549.L26lw7UZ-lkp@intel.com/
Link: https://lore.kernel.org/r/20251005201925.3757345-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 22:44:16 +02:00
Linus Torvalds
7a405dbb0f Only two patch series in this pull request:
- The 3 patch series "mm/memory_hotplug: fixup crash during uevent
   handling" from Hannes Reinecke which fixes a race which was causing udev
   to trigger a crash in the memory hotplug code.
 
 - The 2 patch series "mm_slot: following fixup for usage of
   mm_slot_entry()" from Wei Yang adds some touchups to the just-merged
   mm_slot changes.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOBhBQAKCRDdBJ7gKXxA
 jteZAQDpU3imBB416Bj5/RxtcafTaT7yCEmi7yHajtM+NZW9dAEAnu72pCIXpDgB
 p6HytsUndzGJqUmbHQA2cZGdWPfyFAs=
 =ZNaf
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2025-10-03-16-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more MM updates from Andrew Morton:
"Only two patch series in this pull request:

   - "mm/memory_hotplug: fixup crash during uevent handling" from Hannes
     Reinecke fixes a race that was causing udev to trigger a crash in
     the memory hotplug code

   - "mm_slot: following fixup for usage of mm_slot_entry()" from Wei
     Yang adds some touchups to the just-merged mm_slot changes"

* tag 'mm-stable-2025-10-03-16-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/khugepaged: use KMEM_CACHE()
  mm/ksm: cleanup mm_slot_entry() invocation
  Documentation/mm: drop pxx_mkdevmap() descriptions from page table helpers
  mm: clean up is_guard_pte_marker()
  drivers/base: move memory_block_add_nid() into the caller
  mm/memory_hotplug: activate node before adding new memory blocks
  drivers/base/memory: add node id parameter to add_memory_block()
2025-10-05 12:11:07 -07:00
Linus Torvalds
cf0e371d2b EFI updates for v6.18
- Document what OVMF stands for
 
 - Clear NX restrictions also from 'more reliable' type memory when
   using the DXE service API
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaOK6UgAKCRAwbglWLn0t
 XCQHAP9P7+AoxhNxCi0P6OkCZ+jEIKfa8OvojWhKxY8JxbYbegEA95GfwcUi+8Qf
 RJRe6+HHVffdibu6L4pi+YCqp4hhcg8=
 =XxQi
 -----END PGP SIGNATURE-----

Merge tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI updates from Ard Biesheuvel:

 - Document what OVMF stands for (Open Virtual Machine Firmware)

 - Clear NX restrictions also from 'more reliable' type memory when
   using the DXE service API

* tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable
  efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text
2025-10-05 12:08:14 -07:00
Dan Carpenter
eb7392a019 rtc: optee: Fix error code in optee_rtc_read_alarm()
Return "optee_alarm" instead of "alarm".  The "alarm" pointer is a valid
pointer and not an error pointer.

Fixes: 6266aea864 ("rtc: optee: add alarm related rtc ops to optee rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e3718fe1128964907619ad325c0c5f5c1354ace.1758182509.git.dan.carpenter@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 20:52:40 +02:00
Dan Carpenter
8bbd727453 rtc: optee: fix error code in probe()
Return an error code if kthread_create() fails.  Currently the code
returns success.

Fixes: 6266aea864 ("rtc: optee: add alarm related rtc ops to optee rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/21f1a18008f1bbc8f70d0bd5c05b72fbf5fc9c7d.1758182509.git.dan.carpenter@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 20:52:40 +02:00
Rob Herring (Arm)
a6b4f791cd dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
Convert the APM XGene RTC binding to DT schema format. It's a
straight-forward conversion.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250924222848.2949235-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-05 20:50:29 +02:00
Linus Torvalds
678074f1a8 integrity-v6.18
-----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaOAhtRQcem9oYXJAbGlu
 dXguaWJtLmNvbQAKCRDLwZzRsCrn5bGkAP91Vptp6rJj3R0N0M338tzkVaeybA+V
 fjOHnuB8AvF+FwD/XGLF+lcIFiB8GizXGf/OoyXJwYwciNU7hEdONh5dzQ0=
 =euve
 -----END PGP SIGNATURE-----

Merge tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "Just a couple of changes: crypto code cleanup and a IMA xattr bug fix"

* tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
  lib/digsig: Use SHA-1 library instead of crypto_shash
  integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS
2025-10-05 10:48:33 -07:00
Linus Torvalds
6a74422b97 - switch longson32 platform to DT and use MIPS_GENERIC framework
- cleanups/fixes for lantiq DTs
 - other cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmjiOcYaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBqZQ//Qmdm38fhZZ3jP5orvwq4
 elaCs75/h+kEV4UrnzIrn0AqOjG3gl1PzZx47xrjlyfb1NFRqenLzt3SavtYQNuo
 1555MdFoXgBRiJuGL5E6USDiZ5yjQBbfrMBxtKVrjwRrVouC6ge3o9ajmJsZ/H7J
 NcFdxeuaLebApaTLi7/og9m9kmnohjjB67fxFb0EdfpHNUHpr+I9dMhmwZ33t7tj
 XVvAxq3FCvz8mYCZvqr7F+02UoMmN8O6OGSfnRwaKm2KU6XczuR2urHF/4alLXO1
 8Oswi4R8yXre62V5Mf5uiUjDoKG41Mv06F4f5fZYEHaJbit+SUzO9tFAv2Ky9g7E
 75wrZPdY+S/TgCEHI5py2V4kB+9Dx0GzqrH+yhCf+dN8J1u+LDANgN6hk2u0A237
 R0N1qv3aLvp8xwKqM0jCblzSJW1QqRkbp9lS+b6Ev3P+7Gtz8trq0yOmB9B3m5mj
 qKySfXGdMx0W/JHLv7YVAq4If52cTI4I1vqEE55CNdP0GQYSHZzOKjvkTsye/NrJ
 iMIZ4jNPd9FQGPO9gaw1IyQtoTNy55S5SE3t9DKf4o8KqVTyuAMy/2Rbt3gIPlcP
 eAbtuik3kPcgFDrtZIxR5ehh4lWbLSm8Kh3KLLmNb2Q52s8Qxx8Bykf416GK3rYM
 pdOBbDoLa3s+Zh/YvpP+BaA=
 =213r
 -----END PGP SIGNATURE-----

Merge tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - switch longson32 platform to DT and use MIPS_GENERIC framework

 - cleanups/fixes for lantiq DTs

 - other cleanups and fixes

* tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
  mips: math-emu: replace deprecated strcpy() in me-debugfs
  MIPS: configs: Consolidate Loongson1 defconfigs
  MIPS: Unify Loongson1 PRID_REV
  MIPS: loongson32: Switch to generic core
  MIPS: loongson: Add built-in DTB support
  MIPS: dts: loongson: Add CQ-T300B board
  MIPS: dts: loongson: Add Smartloong-1C board
  MIPS: dts: loongson: Add LSGZ_1B_DEV board
  MIPS: dts: loongson: Add LS1B-DEMO board
  dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
  mips: lantiq: danube: rename stp node on EASY50712 reference board
  mips: lantiq: xway: sysctrl: rename stp clock
  MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy()
  MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad()
  MIPS: generic: Replace deprecated strcpy() in ocelot_detect()
  MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer()
  MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad()
  MIPS: arc: Replace deprecated strcpy() with memcpy()
  MIPS: txx9: Replace deprecated strcpy() with strscpy()
  MIPS: sni: Replace deprecated strcpy() in sni_console_setup()
  ...
2025-10-05 10:09:55 -07:00
Linus Torvalds
742adaa16d OpenRISC updates for 6.18
I picked up one series from Chen Miao, our Google Summer
 of Code contributor:
 
  - Added OpenRISC support for static keys
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmjiEOYACgkQw7McLV5m
 J+QtDBAAmO5OBrBDvwg7SeGSBVdL8uqZyJFGjWGLUA3iBkDRnl1NV6P7mTe4/pUg
 rXaFp9WuCuhS52oS8vI9/ijsfOVtkvzt/5ahRYnUqKcCRcW/c9BDLEsY/PEO1Anw
 tGT/wloeTdE6U2XsLvudpqWP2RfvRRnVzm50/k86rrNgVf4tdz5cEQKh2PHM5iX8
 jEUrYGeamM/Na3+LfVJt3VedxgPZZYRtwNC9z3/zz4WzuYAKuzscOqlyEKfqdf0I
 bIkE3Gnk6ToIe+DIyerdQAS9TVNKNNMYe0sO5mjj6ZY8g4RdXBpq/W03WGBMTpfc
 8n2WeyXmr4LEcUW30vr0Ed3vQNGOe3wU4svlOj1gnx3hpci8DatVbWRPVxBjfx7t
 vCHVHHgAeIcr4KGTd0XHnraeyhvxGQ0eQVALhwJZ9HQUPAMNiK6Wr8OByh96UIQI
 ngSLrQs0r/lmh187Yv2T2mnhp/3XJVLoZAUGN27ODOpXzP6UH325JJKGWBDiuC4P
 0zEhYmTMq1PVDbX9j7H/G+96jeDPLCafETjAcqbzFeSh7/F915LebDPPOzPoLBZU
 V7pJg8y7E4Emep+IGoKjRq/dAT0WsSo9cYN84KK87fyL24ec9l+VkKcejxvZSETo
 hYYc3BBAy3ri3S3Q+Ul6ei+Hb2vcQT+BOPIOvuDT79QmzWg0SWg=
 =1/qd
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of https://github.com/openrisc/linux

Pull OpenRISC updates from Stafford Horne:
 "I picked up one series from Chen Miao, our Google Summer of Code
  contributor, which adds OpenRISC support for static keys"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Add jump label support
  openrisc: Regenerate defconfigs.
  openrisc: Add R_OR1K_32_PCREL relocation type module support
  openrisc: Add text patching API support
2025-10-05 10:02:54 -07:00
Linus Torvalds
21fbefc588 tracing updates for v6.18:
- Use READ_ONCE() and WRITE_ONCE() instead of RCU for syscall tracepoints
 
   Individual system call trace events are pseudo events attached to the
   raw_syscall trace events that just trace the entry and exit of all system
   calls. When any of these individual system call trace events get enabled,
   an element in an array indexed by the system call number is assigned to
   the trace file that defines how to trace it. When the trace event
   triggers, it reads this array and if the array has an element, it uses that
   trace file to know what to write it (the trace file defines the output
   format of the corresponding system call).
 
   The issue is that it uses rcu_dereference_ptr() and marks the elements of
   the array as using RCU. This is incorrect. There is no RCU synchronization
   here. The event file that is pointed to has a completely different way to
   make sure its freed properly. The reading of the array during the system
   call trace event is only to know if there is a value or not. If not, it
   does nothing (it means this system call isn't being traced). If it does,
   it uses the information to store the system call data.
 
   The RCU usage here can simply be replaced by READ_ONCE() and WRITE_ONCE()
   macros.
 
 - Have the system call trace events use "0x" for hex values
 
   Some system call trace events display hex values but do not have "0x" in
   front of it. Seeing "count: 44" can be assumed that it is 44 decimal when
   in actuality it is 44 hex (68 decimal). Display "0x44" instead.
 
 - Use vmalloc_array() in tracing_map_sort_entries()
 
   The function tracing_map_sort_entries() used array_size() and vmalloc()
   when it could have simply used vmalloc_array().
 
 - Use for_each_online_cpu() in trace_osnoise.c()
 
   Instead of open coding for_each_cpu(cpu, cpu_online_mask), use
   for_each_online_cpu().
 
 - Move the buffer field in struct trace_seq to the end
 
   The buffer field in struct trace_seq is architecture dependent in size,
   and caused padding for the fields after it. By moving the buffer to the
   end of the structure, it compacts the trace_seq structure better.
 
 - Remove redundant zeroing of cmdline_idx field in saved_cmdlines_buffer()
 
   The structure that contains cmdline_idx is zeroed by memset(), no need to
   explicitly zero any of its fields after that.
 
 - Use  system_percpu_wq instead of system_wq in user_event_mm_remove()
 
   As system_wq is being deprecated, use the new wq.
 
 - Add cond_resched() is ftrace_module_enable()
 
   Some modules have a lot of functions (thousands of them), and the enabling
   of those functions can take some time. On non preemtable kernels, it was
   triggering a watchdog timeout. Add a cond_resched() to prevent that.
 
 - Add a BUILD_BUG_ON() to make sure PID_MAX_DEFAULT is always a power of 2
 
   There's code that depends on PID_MAX_DEFAULT being a power of 2 or it will
   break. If in the future that changes, make sure the build fails to ensure
   that the code is fixed that depends on this.
 
 - Grab mutex_lock() before ever exiting s_start()
 
   The s_start() function is a seq_file start routine. As s_stop() is always
   called even if s_start() fails, and s_stop() expects the event_mutex to be
   held as it will always release it. That mutex must always be taken in
   s_start() even if that function fails.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaN/4phQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qpToAP4sENpZkZHFOl2PuikmAgjhB6PqiUtL
 LNuMDx45WygcLwD6Awy8DUlEBN6RzTPA761MSjs0+NMg16QLrhPLxWqFEgw=
 =nxDn
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

 - Use READ_ONCE() and WRITE_ONCE() instead of RCU for syscall
   tracepoints

   Individual system call trace events are pseudo events attached to the
   raw_syscall trace events that just trace the entry and exit of all
   system calls. When any of these individual system call trace events
   get enabled, an element in an array indexed by the system call number
   is assigned to the trace file that defines how to trace it. When the
   trace event triggers, it reads this array and if the array has an
   element, it uses that trace file to know what to write it (the trace
   file defines the output format of the corresponding system call).

   The issue is that it uses rcu_dereference_ptr() and marks the
   elements of the array as using RCU. This is incorrect. There is no
   RCU synchronization here. The event file that is pointed to has a
   completely different way to make sure its freed properly. The reading
   of the array during the system call trace event is only to know if
   there is a value or not. If not, it does nothing (it means this
   system call isn't being traced). If it does, it uses the information
   to store the system call data.

   The RCU usage here can simply be replaced by READ_ONCE() and
   WRITE_ONCE() macros.

 - Have the system call trace events use "0x" for hex values

   Some system call trace events display hex values but do not have "0x"
   in front of it. Seeing "count: 44" can be assumed that it is 44
   decimal when in actuality it is 44 hex (68 decimal). Display "0x44"
   instead.

 - Use vmalloc_array() in tracing_map_sort_entries()

   The function tracing_map_sort_entries() used array_size() and
   vmalloc() when it could have simply used vmalloc_array().

 - Use for_each_online_cpu() in trace_osnoise.c()

   Instead of open coding for_each_cpu(cpu, cpu_online_mask), use
   for_each_online_cpu().

 - Move the buffer field in struct trace_seq to the end

   The buffer field in struct trace_seq is architecture dependent in
   size, and caused padding for the fields after it. By moving the
   buffer to the end of the structure, it compacts the trace_seq
   structure better.

 - Remove redundant zeroing of cmdline_idx field in
   saved_cmdlines_buffer()

   The structure that contains cmdline_idx is zeroed by memset(), no
   need to explicitly zero any of its fields after that.

 - Use system_percpu_wq instead of system_wq in user_event_mm_remove()

   As system_wq is being deprecated, use the new wq.

 - Add cond_resched() is ftrace_module_enable()

   Some modules have a lot of functions (thousands of them), and the
   enabling of those functions can take some time. On non preemtable
   kernels, it was triggering a watchdog timeout. Add a cond_resched()
   to prevent that.

 - Add a BUILD_BUG_ON() to make sure PID_MAX_DEFAULT is always a power
   of 2

   There's code that depends on PID_MAX_DEFAULT being a power of 2 or it
   will break. If in the future that changes, make sure the build fails
   to ensure that the code is fixed that depends on this.

 - Grab mutex_lock() before ever exiting s_start()

   The s_start() function is a seq_file start routine. As s_stop() is
   always called even if s_start() fails, and s_stop() expects the
   event_mutex to be held as it will always release it. That mutex must
   always be taken in s_start() even if that function fails.

* tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix lock imbalance in s_start() memory allocation failure path
  tracing: Ensure optimized hashing works
  ftrace: Fix softlockup in ftrace_module_enable
  tracing: replace use of system_wq with system_percpu_wq
  tracing: Remove redundant 0 value initialization
  tracing: Move buffer in trace_seq to end of struct
  tracing/osnoise: Use for_each_online_cpu() instead of for_each_cpu()
  tracing: Use vmalloc_array() to improve code
  tracing: Have syscall trace events show "0x" for values greater than 10
  tracing: Replace syscall RCU pointer assignment with READ/WRITE_ONCE()
2025-10-05 09:43:36 -07:00
Linus Torvalds
d9f24f8e60 rtla: Updates for v6.18
- This update is mostly just consolidating code between osnoise/timerlat
   and top/hist for easier maintenance and less future divergence.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaN/guhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qqU9AQCO+u+Qmx678DCfDJo9X1UPDtS/bM5f
 r30X1pwYfZ3nNAEA47hbkVFcryFJZbrIPxuTGb0GSM36PHAxmch4QAwBqgs=
 =qzZh
 -----END PGP SIGNATURE-----

Merge tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing tools updates from Steven Rostedt

 - This is mostly just consolidating code between osnoise/timerlat and
   top/hist for easier maintenance and less future divergence

* tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tools/rtla: Add remaining support for osnoise actions
  tools/rtla: Add test engine support for unexpected output
  tools/rtla: Fix -A option name in test comment
  tools/rtla: Consolidate code between osnoise/timerlat and hist/top
  tools/rtla: Create common_apply_config()
  tools/rtla: Move top/hist params into common struct
  tools/rtla: Consolidate common parameters into shared structure
2025-10-05 09:38:26 -07:00
Linus Torvalds
2cd14dff16 Probes fixes for v6.17
- tracing: Fix race condition in kprobe initialization causing NULL
   pointer dereference. This happens on weak memory model, which
   does not correctly manage the flags access with appropriate
   memory barriers. Use RELEASE-ACQUIRE to fix it.
 -----BEGIN PGP SIGNATURE-----
 
 iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmjeikYbHG1hc2FtaS5o
 aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bEOYIAKk4KwhSGAhx4Q+Mkqzy
 pbNPvYMdAwocYIqxg3C1/OVK22DcauTZxMzRq7c3bW776Na6eWD4y9aykhRhNlGY
 TeKNAtZ0OdRSlq9ISj7P9H4A+Wywrn1CfNkGsZWRrEy0s2xkwUJjEOciI/WA3o8V
 Nd+Qv+/FTRZ9w/678hb647WrTXIsxSyfBG1L+l25GgqKqqwAtKO8Ur+BhOglxZoC
 WVHsJT6Xmisg0QiujXX3BgDFAXmAFkBuIQd+D+LHWXgo7W8I6VB7ilQ+hibyXAzf
 6yYkZ49kyNLeaWf0/4cc/NaKkq8eK43PXvSvs2yhDt8yWthRLiK/DdeAl63ZNihp
 D2g=
 =Ad1o
 -----END PGP SIGNATURE-----

Merge tag 'probes-fixes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probe fix from Masami Hiramatsu:

 - Fix race condition in kprobe initialization causing NULL pointer
   dereference. This happens on weak memory model, which does not
   correctly manage the flags access with appropriate memory barriers.
   Use RELEASE-ACQUIRE to fix it.

* tag 'probes-fixes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix race condition in kprobe initialization causing NULL pointer dereference
2025-10-05 08:16:20 -07:00
Huacai Chen
032676ff82 LoongArch: Update Loongson-3 default config file
1. Increase NR_CPUS to 2048.
2. Enable KEXEC_FILE options.
3. Enable some EXT4/XFS options.
4. Enable Loongson PWM/MMC/BMC/SE drivers.
5. Enable simple DRM driver.
6. Enable some Intel ethernet drivers.
7. Enable some gpio drivers.
8. Enable some network options.
9. Enable SM3/SM4 cryptographic algorithms.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-10-05 11:52:43 +08:00
Linus Torvalds
6093a688a0 Char/Misc/IIO/Binder changes for 6.18-rc1
Here is the big set of char/misc/iio and other driver subsystem changes
 for 6.18-rc1.  Loads of different stuff in here, it was a busy
 development cycle in lots of different subsystems, with over 27k new
 lines added to the tree.  Included in here are:
   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems
   - MEI driver updates and additions
   - NVMEM driver updates
   - slimbus removal for an unused driver and some other minor
     updates
   - coresight driver updates and additions
   - MHI driver updates
   - comedi driver updates and fixes
   - extcon driver updates
   - interconnect driver additions
   - eeprom driver updates and fixes
   - minor UIO driver updates
   - tiny W1 driver updates
 
 But the majority of new code is in the rust bindings and additions,
 which includes:
   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.
   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here.  I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.
   - Android Binder driver implemented in Rust.  This is the big one, and
     was driving a huge majority of the rust binding work over the past
     years.  Right now there are 2 binder drivers in the kernel, selected
     only at build time as to which one to use as binder wants to be
     included in the system at boot time.  The binder C maintainers all
     agreed on this, as eventually, they want the C code to be removed from
     the tree, but it will take a few releases to get there while both
     are maintained to ensure that the rust implementation is fully
     stable and compliant with the existing userspace apis.
 
 All of these have been in linux-next for a while, with only minor merge
 issues showing up (you will hit them as well.)  Just accept both sides
 of the merge, it's just some header and include file lines, nothing
 major.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
 macHNv5/SjpAh7H5ssBU
 =cjWS
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull Char/Misc/IIO/Binder updates from Greg KH:
 "Here is the big set of char/misc/iio and other driver subsystem
  changes for 6.18-rc1.

  Loads of different stuff in here, it was a busy development cycle in
  lots of different subsystems, with over 27k new lines added to the
  tree.

  Included in here are:

   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems

   - MEI driver updates and additions

   - NVMEM driver updates

   - slimbus removal for an unused driver and some other minor updates

   - coresight driver updates and additions

   - MHI driver updates

   - comedi driver updates and fixes

   - extcon driver updates

   - interconnect driver additions

   - eeprom driver updates and fixes

   - minor UIO driver updates

   - tiny W1 driver updates

  But the majority of new code is in the rust bindings and additions,
  which includes:

   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.

   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here. I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.

   - Android Binder driver implemented in Rust.

     This is the big one, and was driving a huge majority of the rust
     binding work over the past years. Right now there are two binder
     drivers in the kernel, selected only at build time as to which one
     to use as binder wants to be included in the system at boot time.

     The binder C maintainers all agreed on this, as eventually, they
     want the C code to be removed from the tree, but it will take a few
     releases to get there while both are maintained to ensure that the
     rust implementation is fully stable and compliant with the existing
     userspace apis.

  All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
  rust: usb: keep usb::Device private for now
  rust: usb: don't retain device context for the interface parent
  USB: disable rust bindings from the build for now
  samples: rust: add a USB driver sample
  rust: usb: add basic USB abstractions
  coresight: Add label sysfs node support
  dt-bindings: arm: Add label in the coresight components
  coresight: tnoc: add new AMBA ID to support Trace Noc V2
  coresight: Fix incorrect handling for return value of devm_kzalloc
  coresight: tpda: fix the logic to setup the element size
  coresight: trbe: Return NULL pointer for allocation failures
  coresight: Refactor runtime PM
  coresight: Make clock sequence consistent
  coresight: Refactor driver data allocation
  coresight: Consolidate clock enabling
  coresight: Avoid enable programming clock duplicately
  coresight: Appropriately disable trace bus clocks
  coresight: Appropriately disable programming clocks
  coresight: etm4x: Support atclk
  coresight: catu: Support atclk
  ...
2025-10-04 16:26:32 -07:00
Linus Torvalds
59697e061f Staging driver changes for 6.18-rc1
Here is the "big" set of staging driver changes for 6.18-rc1.  Nothing
 really exciting in here they pretty much consist of:
   - minor coding style changes and cleanups
   - some api layer removals where not needed
 
 Overall a quiet development cycle.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEmOw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylVRwCfXpM+wxOkwxZlPeozj3c8GpLNhi0AoKPVFme2
 Anq5D+005pjpOMvrUJug
 =frsM
 -----END PGP SIGNATURE-----

Merge tag 'staging-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the 'big' set of staging driver changes for 6.18-rc1. Nothing
  really exciting in here they pretty much consist of:

   - minor coding style changes and cleanups

   - some api layer removals where not needed

  Overall a quiet development cycle.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (63 commits)
  staging: rtl8723bs: xmit: rephrase comment and drop extra space
  staging: sm750fb: rename camel case variable
  staging: rtl8723bs: hal: put return type and function name on one line
  staging: rtl8723bs: fix typo in comment
  staging: sm750fb: rename snake case variables
  staging: sm750fb: remove unnecessary volatile qualifiers
  staging: rtl8723bs: rtw_efuse.h: simplify copyright banner
  staging: rtl8723bs: remove unused tables
  staging: rtl8723bs: Hal_EfuseParseAntennaDiversity_8723B is empty
  staging: rtl8723bs: remove REG_EFUSE_ACCESS_8723 and EFUSE_ACCESS_ON_8723
  staging: rtl8723bs: remove bWrite from Hal_EfusePowerSwitch
  staging: rtl8723bs: remove wrapper Efuse_PowerSwitch
  staging: octeon: Clean up dead code in ethernet-tx.c
  staging: rtl8723bs: fix fortify warnings by using struct_group
  staging: gpib: use int type to store negative error codes
  staging: rtl8723bs: remove include/recv_osdep.h
  staging: rtl8723bs: remove os_dep/recv_linux.c
  staging: rtl8723bs: rename rtw_os_recv_indicate_pkt
  staging: rtl8723bs: move rtw_os_recv_indicate_pkt to rtw_recv.c
  staging: rtl8723bs: rename rtw_os_alloc_msdu_pkt
  ...
2025-10-04 16:17:14 -07:00
Linus Torvalds
c6006b8ca1 USB/Thunderbolt changes for 6.18-rc1
Here is the big set of USB and thunderbolt drivers for 6.18-rc1.  It was
 another normal development cycle, with lots of the usual drivers getting
 updates:
   - Thunderbolt driver cleanups and additions
   - dwc3 driver updates
   - dwc2 driver updates
   - typec driver updates
   - xhci driver updates and additions
   - offload USB engine updates for better power management
   - unused tracepoint removals
   - usb gadget fixes and updates as more users start to rely on these
     drivers instead of the "old" function gadget drivers
   - new USB device ids
   - other minor driver USB driver updates
   - new USB I/O driver framework and driver additions
 
 The last item, the usb i/o driver, has an i2c and gpio driver added
 through this tree.  Those drivers were acked by the respective subsystem
 maintainers, but you will get a merge conflict with the i2c tree where
 new drivers were added in the same places in a Kconfig and Makefile.
 The merge conflict is simple, just take both sides.
 
 All of these have been in linux-next for a while, with the only issue
 being the i2c tree merge conflicts.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEo8Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynpOQCgkenJzjsGVHhl/tm447z3pQ8NtvQAn2GfxMF9
 4jQlUtr6McyzCLVPOZRD
 =pPei
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
  was another normal development cycle, with lots of the usual drivers
  getting updates:

   - Thunderbolt driver cleanups and additions

   - dwc3 driver updates

   - dwc2 driver updates

   - typec driver updates

   - xhci driver updates and additions

   - offload USB engine updates for better power management

   - unused tracepoint removals

   - usb gadget fixes and updates as more users start to rely on these
     drivers instead of the "old" function gadget drivers

   - new USB device ids

   - other minor driver USB driver updates

   - new USB I/O driver framework and driver additions"

  The last item, the usb i/o driver, has an i2c and gpio driver added
  through this tree. Those drivers were acked by the respective
  subsystem maintainers.

  All of these have been in linux-next for a while"

* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
  usb: vhci-hcd: Prevent suspending virtually attached devices
  USB: serial: option: add SIMCom 8230C compositions
  thunderbolt: Fix use-after-free in tb_dp_dprx_work
  usb: xhci: align PORTSC trace with one-based port numbering
  usb: xhci: correct indentation for PORTSC tracing function
  usb: xhci: improve TR Dequeue Pointer mask
  usb: xhci-pci: add support for hosts with zero USB3 ports
  usb: xhci: Update a comment about Stop Endpoint retries
  Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
  usb: gadget: f_rndis: Refactor bind path to use __free()
  usb: gadget: f_ecm: Refactor bind path to use __free()
  usb: gadget: f_acm: Refactor bind path to use __free()
  usb: gadget: f_ncm: Refactor bind path to use __free()
  usb: gadget: Introduce free_usb_request helper
  usb: gadget: Store endpoint pointer in usb_request
  usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
  usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
  usb: host: xhci-rcar: Move R-Car reg definitions
  dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
  usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
  ...
2025-10-04 16:07:08 -07:00
Linus Torvalds
5d2f4730bb TTY/Serial update for 6.18-rc1
Here are some small updates for tty/serial drivers for 6.18-rc1.
 
 Not many changes overall, just the usual:
   - abi cleanups and reworking of the tty functions by Jiri by adding
     console lock guard logic
   - 8250_platform driver updates
   - qcom-geni driver updates
   - other minor serial driver updates
   - some more vt escape codes added
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEnLA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymLswCfa2SDyet0vn5oIrto+0WG9Wxlp3AAoMaDzkqG
 DX2YoOI1L0miAQfQ9IhZ
 =0V8V
 -----END PGP SIGNATURE-----

Merge tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here are some small updates for tty/serial drivers for 6.18-rc1.

  Not many changes overall, just the usual:

   - abi cleanups and reworking of the tty functions by Jiri by adding
     console lock guard logic

   - 8250_platform driver updates

   - qcom-geni driver updates

   - other minor serial driver updates

   - some more vt escape codes added

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits)
  tty: serial: fix help message for SERIAL_CPM
  serial: 8250: omap: Support wakeup pinctrl state on suspend
  dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
  serial: max310x: improve interrupt handling
  vt: move vc_saved_screen to within tty allocated judgment
  Revert "m68k: make HPDCA and HPAPCI bools"
  tty: remove redundant condition checks
  tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()
  vt: remove redundant check on vc_mode in con_font_set()
  serial: qcom-geni: Add DFS clock mode support to GENI UART driver
  m68k: make HPDCA and HPAPCI bools
  tty: n_gsm: Don't block input queue by waiting MSC
  serial: qcom-geni: Fix off-by-one error in ida_alloc_range()
  serdev: Drop dev_pm_domain_detach() call
  serial: sc16is7xx: drop redundant conversion to bool
  vt: add support for smput/rmput escape codes
  serial: stm32: allow selecting console when the driver is module
  serial: 8250_core: fix coding style issue
  tty: serial: Modify the use of dev_err_probe()
  s390/char/con3270: use tty_port_tty guard()
  ...
2025-10-04 15:57:44 -07:00
Linus Torvalds
cc07b0a3af MTD core:
- Bad blocks increment is skipped if the block is already known
   bad (improves user statistics relevance).
 - Expose the OOB layout via debugfs.
 
 * Raw NAND:
 - Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers,
   including extra features, such as chip select and 6-byte NAND ID
   reading support.
 - Drop the s3c2410 driver.
 
 * SPI NAND:
 - Important SPI NAND continuous read improvements and fixes.
 - Add support for FudanMicro FM25S01A.
 - Add support for continuous reads in Gigadevice vendor driver.
 
 * ECC:
 - Add support for the Realtek ECC engine.
 
 * SPI NOR:
 
 - Some flashes can't perform reads or writes with start or end being an
   odd number in Octal DTR mode. File systems like UBIFS can request such
   reads or writes, causing the transaction to error out. Pad the read or
   write transactions with extra bytes to avoid this problem.
 
 This PR comes with the usual amount of various miscellaneous fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmjf6ywACgkQJWrqGEe9
 VoTsjgf/ZJDpcteO8hk+YUZfVycEKCDB0QjEFfX3gP3ABjvBJ1jwliDselpYPxfI
 La2BIw0X0oljfpY69a2KV440NXSW+hcWBUOw9IyhlaLA3tz8vFZbDnybPYAYQyq4
 Chvj0F18kwvxv9DZrp9rYLfnXcqzVaKr/g3/q8OwfoYzhmnKecRKStbRk+NQ94zp
 hL32a5bi2rgAuJl1raNTL2pHyYaYvo46rDDDApSipKt58GdYG1CA6eSrMLdWwgbL
 k9cJ+WQsXF+rfyfqDLZziXMjWixtNBkxOhewnZOWG21wdEPXdTVzaXF/a67fUhxO
 V0Erqomnx4dwi880Uv/4KGui0Rfgtg==
 =D6Lb
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "MTD core:
   - Bad blocks increment is skipped if the block is already known bad
     (improves user statistics relevance)
   - Expose the OOB layout via debugfs

  Raw NAND:
   - Add support for Loongson-2K1000 and Loongson-2K0500 NAND
     controllers, including extra features, such as chip select
     and 6-byte NAND ID reading support
   - Drop the s3c2410 driver

  SPI NAND:
   - Important SPI NAND continuous read improvements and fixes
   - Add support for FudanMicro FM25S01A
   - Add support for continuous reads in Gigadevice vendor driver

  ECC:
   - Add support for the Realtek ECC engine

  SPI NOR:

   - Some flashes can't perform reads or writes with start or end being
     an odd number in Octal DTR mode. File systems like UBIFS can
     request such reads or writes, causing the transaction to error out.

     Pad the read or write transactions with extra bytes to avoid this
     problem.

  And the usual amount of various miscellaneous fixes"

* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
  mtd: rawnand: sunxi: drop unused module alias
  mtd: rawnand: stm32_fmc2: drop unused module alias
  mtd: rawnand: rockchip: drop unused module alias
  mtd: rawnand: pl353: drop unused module alias
  mtd: rawnand: omap2: drop unused module alias
  mtd: rawnand: atmel: drop unused module alias
  mtd: onenand: omap2: drop unused module alias
  mtd: hyperbus: hbmc-am654: drop unused module alias
  mtd: jedec_probe: use struct_size() helper for cfiq allocation
  mtd: cfi: use struct_size() helper for cfiq allocation
  mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
  mtd: rawnand: omap2: fix device leak on probe failure
  mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
  mtd: nand: realtek-ecc: Add Realtek external ECC engine support
  dt-bindings: mtd: Add realtek,rtl9301-ecc
  mtd: spinand: repeat reading in regular mode if continuous reading fails
  mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
  mtd: spinand: fix direct mapping creation sizes
  mtd: rawnand: fsmc: Default to autodetect buswidth
  mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
  ...
2025-10-04 15:50:37 -07:00
Linus Torvalds
20f868da2c rpmsg updates for v6.18
Clean up the dev_pm_domain integration in rpmsg core. Correct module
 aliases for the rpmsg char driver.
 
 Transition Qualcomm SMD and GLINK drivers to strscpy() and fix the
 regression in legacy code for acquiring outgoing interrupts using the
 non-mailbox based mechanism.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmjehnkVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FGJMP+gLVjUQW+5CEGjMHOjZ0s+Z1xuru
 8mJlgJWStHk158HAOn6RgCRHjqOtUqXpBTa8/OMY76VhmyyQ5e1jdyMOveFxp6E+
 BgffJm7u5q+f4UjdIwDlvugUz9dgI1xi+CghYkaiWBDW1Vngwm44xLFFzO5zFd1t
 48GkJWCboTHjy+ZRH8bt9h8UB9KmG8XdD+LspG5Apxc1qnfr3BAtWNoajzyfMIrn
 BdqW6R0KSoPUzlZNdaWTSMyXeHHG2MRuRR5aK7xPW5XmS/3UGT3rIB9yI+fdLO2T
 eU8JszdFtLO2lMmaeC+y8ciQYAocaOaAL4tP20+fsv5UFL+cIB0yt8vw2Wo8fxAQ
 86LJ2nMymyvV+ZRkkhO6hpC9qFMKWKHl2fozu05+GzAzDezFk8nmhGEfQtwq0+id
 aLQPOei2KHu6QC5VEqdall9B6rqRJzVjE7/qfJX7phBFTgbtt/j58fM8Ug77Y+Gq
 /azPvf/NanUb0PeqRxakNe3bee9/NT/cuweCaydWILOPgcIAGE5+q8fhgAVblXJS
 xfbbzrjY8RMi08ZDEkfrYWaAqQNMdUdIZXknZU6RWmEhJ/8Meqju9SNtWx2F+p62
 Y0chwhG69fX8ViNAPmg6v8wGkaxcsfmhhXkqewTyvRXexPAGM5fzh1zIZbmNZpaD
 C83M2XDwiASWP0Fq
 =GD/v
 -----END PGP SIGNATURE-----

Merge tag 'rpmsg-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull rpmsg updates from Bjorn Andersson:

 - Clean up the dev_pm_domain integration in rpmsg core. Correct module
   aliases for the rpmsg char driver.

 - Transition Qualcomm SMD and GLINK drivers to strscpy() and fix the
   regression in legacy code for acquiring outgoing interrupts using the
   non-mailbox based mechanism.

* tag 'rpmsg-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: qcom_smd: Fix fallback to qcom,ipc parse
  rpmsg: Use strscpy() instead of strscpy_pad()
  rpmsg: core: Drop dev_pm_domain_detach() call
  rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table
2025-10-04 15:46:51 -07:00
Linus Torvalds
c35f902cb3 remoteproc updates for v6.18
Enable coredump support for the i.MX HiFi core remoteproc, and clean up
 the i.MX remoteproc driver.
 
 Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut own
 the ADSP remoteproc when bootloader has loaded the "Lite" firmware on X
 Elite. Improve the resource handover procedure to avoid possibly duplicate
 handling.
 
 Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc
 drivers to handle resources using devres.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmjehA8VHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3F8HoP/A9eBjE7wBguQ/3YkAPKe8Idrfrb
 kxl5weM1zVoIz4Hz/DLfv2LkKtxw/sELmQyk/iiO5N6jte5xsgfCQj1wbH4l9GvC
 tguRwbh1IKfsynJEAKj0fuUU0OpIwsFubuJCsmaHhlsZJruqg5SwHLlHT03CTeKp
 PeIDUOyyfHeOimMrwvwhwORzhxve3NKdrPks1xzurTZhHgsnIZe31UPfJEN+YPEm
 9OVmahSQhVoA5O7kr1KLKHjGZ7lV7KMCtYxJc9X1wbNMvfxY//D+mlRVPNAZSpVq
 gwXMPXLukqCQcLXNwUCTvjZwv8QnzKs1XKUvchYRp/8IkRy02zvi2UKoqQY1IfIv
 g58BVjCWnD/nbl+soCQ6iu7S8bEy3ruw6cnIYULDQOhCgSax5snAa1aq93H/XPZK
 3/YI5OhaQtc1iv4YH9BUg+HLNu/KDWxfU9jfXXa7BAQb9KQgJU9cBy3pofT+jkSI
 Z3t5lmfw/HIDvMagKLwnM/VY9lL5K1YUjlFV2iJ1rHDJSwckpI9mkFBig3zfFSNR
 Ezc2ifbY6D58Vox+E/r2CgOLPq0s9k8ionXJ+TxJ/Od8h2mvtqRIXexd3x+5c0hN
 mLaL6f5rfdmZS3V1Rg/NYRtuFeVe+flBnP0rLmZ2XrbHRU4TTyn+vGp00tSihsbo
 0eH98EUK56CpoWjg
 =UVU4
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:

 - Enable coredump support for the i.MX HiFi core remoteproc, and clean
   up the i.MX remoteproc driver.

 - Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut
   own the ADSP remoteproc when bootloader has loaded the "Lite"
   firmware on X Elite. Improve the resource handover procedure to avoid
   possibly duplicate handling.

 - Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc
   drivers to handle resources using devres.

* tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits)
  remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()
  remoteproc: qcom: pas: Drop redundant assignment to ret
  remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
  remoteproc: qcom: q6v5: Avoid handling handover twice
  remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice
  remoteproc: qcom: pas: Add Milos remoteproc support
  dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs
  remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
  remoteproc: imx_rproc: Clean up after ops introduction
  remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case
  remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case
  remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case
  remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match
  remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg
  remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox()
  remoteproc: wkup_m3: Use devm_rproc_add() helper
  remoteproc: wkup_m3: Use devm_rproc_alloc() helper
  remoteproc: wkup_m3: Use devm action to call PM runtime put sync
  remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper
  remoteproc: keystone: Use devm_rproc_add() helper
  ...
2025-10-04 15:45:17 -07:00
Linus Torvalds
54ba6d9b13 hid-for-linus-2025093001
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmjb8vETHGJlbnRpc3NA
 a2VybmVsLm9yZwAKCRDsxfBeGdlKNhMhD/42hnNxVA+pRYUdwgX+5fGPkKpM6ayS
 z627qOGgFsrwidipRmx68VZpHnKTpZMKyqxYQYEQ0SExVviXaIohQGu04OF+N+En
 3fo9zHJiXxnlxVv9R+7LiV/S74yN1nLM+nURnvG7NjIqOeLfxO0NnNdh+MIGmYzv
 OdUdAO7p84F5aadKPjyFTHbO7Y2bAT2XT0xTJR+SZ7MnP8rWRbN3l/BfrkTL+D3X
 Bhg9Xdgoqst6f1Be5m6oYthHaXbs3yjqGYMRkhFRKlEsd/ArBRudyMzqAQ602WMl
 gHMcHwpc5ztJTIOBZU6QzBAbJBozrPWzr6Lvih3jE2HZBs7B2mw0NcnE4+7xkaYs
 llNcrwlBTRuS0qwvrJcNvstV7z9toCx4PjVCYiMhTAdkq1m3J1KqCAPA5OvIELLq
 xXjHmmNRYe9bvAik4cuVxeuw5azvgxYd/lFJx7OmENTw/pczXot5N3+bAqdl+4ka
 yFF+yUvpYTdrYXQmj74FxJODlErHUSRxNtFeAk6nJ1HLZB/lcl6XF9YnCqpE4TVe
 WPzuzrpoJvOeUvqBHtXYQ2/g8argaOAQu62NpfjF8/OA1nBF4Jg/n/lRGy4Mmmec
 ar7w4+3y72KSVmLJ7F775Kakrod/gT8tA1RPtHGFFXbayGqw6Cz9E6E0P0q08n0y
 v0CUWASm2YIEWA==
 =8Nwa
 -----END PGP SIGNATURE-----

Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Benjamin Tissoires:

 - haptic touchpad support (Angela Czubak and Jonathan Denose)

 - support for audio jack handling on DualSense Playstation controllers
   (Cristian Ciocaltea)

 - allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
   Tissoires)

 - rework hidraw ioctls to make them safer (and tested) (Benjamin
   Tissoires)

 - various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)

 - better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)

 - other assorted cleanups and fixes

* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
  HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
  HID: playstation: Silence sparse warnings for locking context imbalances
  HID: playstation: Update SP preamp gain comment line
  HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
  HID: core: Change hid_driver to use a const char* for name
  HID: hidraw: tighten ioctl command parsing
  selftests/hid: hidraw: forge wrong ioctls and tests them
  selftests/hid: hidraw: add more coverage for hidraw ioctls
  selftests/hid: update vmtest.sh for virtme-ng
  HID: playstation: Support DualSense audio jack event reporting
  HID: playstation: Support DualSense audio jack hotplug detection
  HID: playstation: Redefine DualSense input report status field
  HID: playstation: Prefer kzalloc(sizeof(*buf)...)
  HID: playstation: Document spinlock_t usage
  HID: playstation: Fix all alignment and line length issues
  HID: playstation: Correct spelling in comment sections
  HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
  HID: playstation: Simplify locking with guard() and scoped_guard()
  HID: playstation: Add spaces around arithmetic operators
  HID: playstation: Make use of bitfield macros
  ...
2025-10-04 15:38:04 -07:00
Linus Torvalds
b66451723c platform-drivers-x86 for v6.18-1
Highlights
 
 - amd/pmf:
 
   - Add support for adjusting PMF PPT and PPT APU thresholds
 
   - Extend custom BIOS inputs for more policies
 
   - Update ta_pmf_action structure to the latest PMF TA
 
 - arm64: thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
 
 - int3472: Increase handshake GPIO delay
 
 - intel/pmc:
 
   - SSRAM support for Lunar Lake and Panther Lake
 
   - Support reading substate requirements data from S0ix blockers
     (for platforms starting from Panther Lake)
 
   - Wildcat Lake support
 
 - intel-uncore-freq:
 
   - Solve duplicate sysfs entry warnings
 
   - Present unique domain ID per package
 
 - portwell-ec:
 
   - Support suspend/resume
 
   - Add hwmon support for voltage and temperature
 
 - redmi-wmi: Add WMI driver for Redmibook keyboard
 
 - think-lmi Certificate support for ThinkCenter
 
 - x86-android-tables + others: Convert away from legacy GPIO APIs
 
 - x86-android-tables:
 
   - Add support for Acer A1-840 tablet
 
   - Fix modules list for Lenovo devices
 
   - Stop using EPROBE_DEFER
 
 - Miscellaneous cleanups / refactoring / improvements
 
 The following is an automated shortlog grouped by driver:
 
 Add WMI driver for Redmibook keyboard:
  - Add WMI driver for Redmibook keyboard
 
 amd/hsmp:
  -  Replace dev_err() with dev_info() for non-fatal errors
 
 amd/pmf:
  -  Add custom BIOS input support for AMD_CPU_ID_PS
  -  Add debug logs for pending requests and custom BIOS inputs
  -  Add helper to verify BIOS input notifications are enable/disable
  -  Add support for adjusting PMF PPT and PPT APU thresholds
  -  Call enact function sooner to process early pending requests
  -  Extend custom BIOS inputs for more policies
  -  Fix the custom bios input handling mechanism
  -  Preserve custom BIOS inputs for evaluating the policies
  -  Remove redundant ternary operators
  -  Update ta_pmf_action structure member
 
 arm64: dts: qcom: x1e80100-t14s:
  -  add EC
 
 arm64: thinkpad-t14s-ec:
  -  new driver
 
 barco-p50-gpio:
  -  use software nodes for gpio-leds/keys
 
 dell_rbu:
  -  fix assignment in if condition warning
 
 dt-bindings: embedded-controller:
  -  Add Lenovo Thinkpad T14s EC
 
 int3472:
  -  Convert int3472_gpio_map to use C99 initializers
  -  Increase ov08x40 handshake GPIO delay to 45 ms
  -  Rework regulator enable-time handling
 
 intel/pmc:
  -  Add Wildcat Lake support to intel_pmc_core
  -  Add Wildcat Lake support to Intel PMC SSRAM Telemetry
  -  Enable SSRAM support for Lunar Lake
  -  Enable SSRAM support for Panther Lake
  -  Improve function to show substate header
  -  Move telemetry endpoint register handling
  -  Replace dev_warn() with dev_dbg()
  -  Show substate requirement for S0ix blockers
  -  use kcalloc() instead of kzalloc()
 
 intel-uncore-freq:
  -  Fix warning in partitioned system
  -  Present unique domain ID per package
 
 meraki-mx100:
  -  Use static device properties
 
 pcengines-apuv2:
  -  Use static device properties
 
 portwell-ec:
  -  Add hwmon support for voltage and temperature
  -  Add suspend/resume support for watchdog
  -  don't print superfluous errors
 
 quickstart:
  -  Use devm_mutex_init()
 
 think-lmi:
  -  Add certificate GUID structure
  -  Add extra TC BIOS error messages
  -  Certificate support for ThinkCenter
 
 wmi-capdata01:
  -  Remove unneeded semicolon
 
 x86-android-tablets:
  -  Add support for Acer A1-840 tablet
  -  convert EDT devices to GPIO references
  -  convert Goodix devices to GPIO references
  -  convert gpio_keys devices to GPIO references
  -  convert HiDeep devices to GPIO references
  -  convert HID-I2C devices to GPIO references
  -  convert int3496 devices to GPIO references
  -  convert Novatek devices to GPIO references
  -  convert Wacom devices to GPIO references
  -  convert wm1502 devices to GPIO references
  -  convert Yoga Tab2 fast charger to GPIO references
  -  Fix modules lists for Lenovo devices
  -  Move Acer info to its own file
  -  remove support for GPIO lookup tables
  -  Remove the use of dev_err_probe()
  -  replace bat_swnode with swnode_group
  -  Simplify lenovo_yoga_tab2_830_1050_exit()
  -  Simplify node-group [un]registration
  -  Stop using EPROBE_DEFER
  -  Update my email address
  -  use swnode_group instead of manual registering
 
 xiaomi-wmi:
  -  Use devm_mutex_init()
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaNu7iwAKCRBZrE9hU+XO
 MV77AQCJzhaNcx/xhJ4RQZFOZfugIlRljMwmiBOHRAuh5tL59AD/R755jdRsrqgy
 TralVm1h3aeGUeqpxtAxCx8xa+cI6gA=
 =bJ/l
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Ilpo Järvinen:

 - amd/pmf:
    - Add support for adjusting PMF PPT and PPT APU thresholds
    - Extend custom BIOS inputs for more policies
    - Update ta_pmf_action structure to the latest PMF TA

 - arm64:
    - thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon

 - int3472:
    - Increase handshake GPIO delay

 - intel/pmc:
    - SSRAM support for Lunar Lake and Panther Lake
    - Support reading substate requirements data from S0ix blockers
      (for platforms starting from Panther Lake)
    - Wildcat Lake support

 - intel-uncore-freq:
    - Solve duplicate sysfs entry warnings
    - Present unique domain ID per package

 - portwell-ec:
    - Support suspend/resume
    - Add hwmon support for voltage and temperature

 - redmi-wmi:
    - Add WMI driver for Redmibook keyboard

 - think-lmi:
    - Certificate support for ThinkCenter

 - x86-android-tables + others:
    - Convert away from legacy GPIO APIs

 - x86-android-tables:
    - Add support for Acer A1-840 tablet
    - Fix modules list for Lenovo devices
    - Stop using EPROBE_DEFER

 - Miscellaneous cleanups / refactoring / improvements

* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
  platform/x86: pcengines-apuv2: Use static device properties
  platform/x86: meraki-mx100: Use static device properties
  platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
  platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
  platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
  platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
  platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
  platform/x86: x86-android-tablets: Move Acer info to its own file
  platform/x86: x86-android-tablets: Update my email address
  platform/x86: x86-android-tablets: Simplify node-group [un]registration
  platform/x86: x86-android-tablets: use swnode_group instead of manual registering
  platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
  platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
  platform/x86: x86-android-tablets: remove support for GPIO lookup tables
  platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
  platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
  platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
  platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
  platform/x86: x86-android-tablets: convert EDT devices to GPIO references
  platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
  ...
2025-10-04 15:28:18 -07:00
Linus Torvalds
b4e5bb5555 Hi,
A few minor updates/fixes for keys.
 
 BR, Jarkko
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaOEv8gAKCRAaerohdGur
 0q3BAPwLHEF9RDLyDbmUKMYXO2F7ckApZFW4zURYGAG9PpiE9wEA7daw0luUZGsB
 u3767QRyhKrhJc0ad+QF95rj8GKuSgg=
 =8Nni
 -----END PGP SIGNATURE-----

Merge tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull keys updates from Jarkko Sakkinen:
 "A few minor updates/fixes for keys"

* tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  security: keys: use menuconfig for KEYS symbol
  KEYS: encrypted: Use SHA-256 library instead of crypto_shash
  KEYS: trusted_tpm1: Move private functionality out of public header
  KEYS: trusted_tpm1: Use SHA-1 library instead of crypto_shash
  KEYS: trusted_tpm1: Compare HMAC values in constant time
2025-10-04 15:23:29 -07:00
Linus Torvalds
908057d185 This update includes the following changes:
Drivers:
 
 - Add ciphertext hiding support to ccp.
 - Add hashjoin, gather and UDMA data move features to hisilicon.
 - Add lz4 and lz77_only to hisilicon.
 - Add xilinx hwrng driver.
 - Add ti driver with ecb/cbc aes support.
 - Add ring buffer idle and command queue telemetry for GEN6 in qat.
 
 Others:
 
 - Use rcu_dereference_all to stop false alarms in rhashtable.
 - Fix CPU number wraparound in padata.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmjbpJsACgkQxycdCkmx
 i6fuTRAAzv5o0MIw4Kc7EEU3zMgFSX0FdcTUPY+eiFrWZrSrvUVW+jYcH9ppO8J7
 offAYSZYatcyyU9+u8X22CQNKLdXnKQQ0YymWO35TOpvVxveUM1bqEEV1ZK0xaXD
 hlJTLoFIsPaVVhi8CW+ZNhDJBwJHNCv7Yi9TUB6sC7rilWWbJ5LzbEVw3Rtg81Lx
 0hcuGX2LrpsHOVVWYxGdJ534Kt2lrkt+8/gWOFg3ap3RVQ39tohEjS2Adm2p8eiX
 zIdru/aYd89EcYoxuFyylX2d/OLmMAQpFsADy/Fys26eeOWtqggH62V1LAiSyEqw
 vLRBCVKpLhlbNNfnUs0f5nqjjYEUrNk9SA4rgoxITwKoucbWBQMS4zWJTEDKz29n
 iBBqHsukGpwVOE6RY8BzR/QNJKhZCSsJpGkagS1v6VPa5P1QomuKftGXKB7JKXKz
 xoyk+DhJyA8rkb/E5J9Ni7+Tb08Y4zvJ1dpCQHZMlln3DKkK+kk3gkpoxXMZwBV2
 LbEMGTI+sfnAfqkGCJYAZR9gDJ5LQDR9jy/Ds5jvPuVvvjyY5LY/bjETqGPF2QVs
 Rz2Sg0RHl7PVZOP6QgbQzkV7SkJrZfyu5iYd0ZfUqZr7BaHLOHJG/E/HlUW3/mXu
 OjD+Q5gPhiOdc/qn+32+QERTDCFQdbByv0h7khGQA5vHE3XCu8E=
 =knnk
 -----END PGP SIGNATURE-----

Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "Drivers:
   - Add ciphertext hiding support to ccp
   - Add hashjoin, gather and UDMA data move features to hisilicon
   - Add lz4 and lz77_only to hisilicon
   - Add xilinx hwrng driver
   - Add ti driver with ecb/cbc aes support
   - Add ring buffer idle and command queue telemetry for GEN6 in qat

  Others:
   - Use rcu_dereference_all to stop false alarms in rhashtable
   - Fix CPU number wraparound in padata"

* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
  dt-bindings: rng: hisi-rng: convert to DT schema
  crypto: doc - Add explicit title heading to API docs
  hwrng: ks-sa - fix division by zero in ks_sa_rng_init
  KEYS: X.509: Fix Basic Constraints CA flag parsing
  crypto: anubis - simplify return statement in anubis_mod_init
  crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
  crypto: hisilicon/qm - clear all VF configurations in the hardware
  crypto: hisilicon - enable error reporting again
  crypto: hisilicon/qm - mask axi error before memory init
  crypto: hisilicon/qm - invalidate queues in use
  crypto: qat - Return pointer directly in adf_ctl_alloc_resources
  crypto: aspeed - Fix dma_unmap_sg() direction
  rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
  crypto: comp - Use same definition of context alloc and free ops
  crypto: omap - convert from tasklet to BH workqueue
  crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
  crypto: caam - double the entropy delay interval for retry
  padata: WQ_PERCPU added to alloc_workqueue users
  padata: replace use of system_unbound_wq with system_dfl_wq
  crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
  ...
2025-10-04 14:59:29 -07:00
Linus Torvalds
d104e3d17f CXL changes for v6.18
Misc changes:
 - Use str_plural() instead of open code for emitting strings.
 - Use str_enabled_disabled() instead of ternary operator
 - Fix emit of type resource_size_t argument for validate_region_offset()
 - Typo fixup in CXL driver-api documentation
 - Rename CFMWS coherency restriction defines
 - Add convention doc describe dealing with x86 low memory hole and CXL
 
 Poison Inject support series:
 - Move hpa_to_spa callback to new reoot decoder ops structure
 - Define a SPA to HPA callback for interleave calculation with XOR math
 - Add support for SPA to DPA address translation with XOR
 - Add locked variants of poison inject and clear functions
 - Add inject and clear poison support by region offset
 
 CXL access coordinates update fix series:
 - A comment update for hotplug memory callback prority defines
 - Add node_update_perf_attrs() for updating perf attrs on a node
 - Update cxl_access_coordinates() to use the new node update function
 - Remove hmat_update_target_coordinates() and related code
 
 CXL delayed downstream port enumeration and initialization series
 - Add helper to detect top of CXL device topology and remove open coding
 - Add helper to delete single dport
 - Add a cached copy of target_map to cxl_decoder
 - Refactor decoder setup to reduce cxl_test burden
 - Defer dport allocation for switch ports
 - Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
 - Adjust the mock version of devm_cxl_switch_port_decoders_setup() due to
   cxl core usage
 - Setup target_map for cxl_test decoder initialization
 - Change SSLBIS handler to handle single dport
 - Move port register setup to when first dport appears
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmjdqxAACgkQYGjFFmlT
 OEoayhAAqW6nPPM2XNiNigGp5oxQTt0GiblhS/PDAq+VHZaFQtrM6lvbrvqj1Gus
 g49ID4SkKVq2SKZlGVk5xcPE2BEeKp4YOF6mmAqKNy6geeG0mVXf/gNbhd/8pnpm
 zmbX9FdAR2x4ZimPzBZZO0vlm5NG61sVHWyz1VcU9rQUpB8shSQF3QIoKypq1MpU
 G7PgN92Pc8Ztr1cI9RSFXV6p5Bd26IMt7Bi3Wub5z4rtnQAFzhtQ5oFpen6Dc4Gj
 py+BwY9x25HsVCWD6oQIFvDfH5iiZfSbL62h2ttbalkqM0dFJedKmHq1rNMpsV/4
 mNY2COr2uTBOB7Zht10+Q46pAAYdBTVKFIhRAEUidnCmzF8PPEAEYISo4vE5Oqih
 lUJYhU8tREacLJ9jR4ro0NwgM43mESX4Aj84CV+BtPA2SyI2qsqY8xCHXyyiaLsn
 GUGSbVXRbhtAWs+gM8ciERx9U/AE+yV8oABaz/zeUO5RMSB2ho6y9XD6PFHfp5Fb
 w+Ud6CNkk00HR8Api38zfHJeMOR+GzsaebZgW8pOcfucC6dxS1rhUa3iN0ifLMIC
 QdRSemwBjbPWJ21JwHxJCGVv/OUocziTg9H5ydZfaxOoXjIKYZcKo5ePUe4KH7bi
 2tNjlA8BCycBiwaUMIMEHcIZNNm2GGddeN6TwP8QLVAevj3Hkl0=
 =VYmp
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL updates from Dave Jiang:
 "The changes include adding poison injection support, fixing CXL access
  coordinates when onlining CXL memory, and delaing the enumeration of
  downstream switch ports for CXL hierarchy to ensure that the CXL link
  is established at the time of enumeration to address a few issues
  observed on AMD and Intel platforms.

  Misc changes:
   - Use str_plural() instead of open code for emitting strings.
   - Use str_enabled_disabled() instead of ternary operator
   - Fix emit of type resource_size_t argument for
     validate_region_offset()
   - Typo fixup in CXL driver-api documentation
   - Rename CFMWS coherency restriction defines
   - Add convention doc describe dealing with x86 low memory hole
     and CXL

  Poison Inject support:
   - Move hpa_to_spa callback to new reoot decoder ops structure
   - Define a SPA to HPA callback for interleave calculation with
     XOR math
   - Add support for SPA to DPA address translation with XOR
   - Add locked variants of poison inject and clear functions
   - Add inject and clear poison support by region offset

  CXL access coordinates update fix:
   - A comment update for hotplug memory callback prority defines
   - Add node_update_perf_attrs() for updating perf attrs on a node
   - Update cxl_access_coordinates() to use the new node update function
   - Remove hmat_update_target_coordinates() and related code

  CXL delayed downstream port enumeration and initialization:
   - Add helper to detect top of CXL device topology and remove
     open coding
   - Add helper to delete single dport
   - Add a cached copy of target_map to cxl_decoder
   - Refactor decoder setup to reduce cxl_test burden
   - Defer dport allocation for switch ports
   - Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
   - Adjust the mock version of devm_cxl_switch_port_decoders_setup()
     due to cxl core usage
   - Setup target_map for cxl_test decoder initialization
   - Change SSLBIS handler to handle single dport
   - Move port register setup to when first dport appears"

* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
  cxl: Move port register setup to when first dport appear
  cxl: Change sslbis handler to only handle single dport
  cxl/test: Setup target_map for cxl_test decoder initialization
  cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
  cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
  cxl: Defer dport allocation for switch ports
  cxl/test: Refactor decoder setup to reduce cxl_test burden
  cxl: Add a cached copy of target_map to cxl_decoder
  cxl: Add helper to delete dport
  cxl: Add helper to detect top of CXL device topology
  cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
  cxl/acpi: Rename CFMW coherency restrictions
  Documentation/driver-api: Fix typo error in cxl
  acpi/hmat: Remove now unused hmat_update_target_coordinates()
  cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
  drivers/base/node: Add a helper function node_update_perf_attrs()
  mm/memory_hotplug: Update comment for hotplug memory callback priorities
  cxl: Fix emit of type resource_size_t argument for validate_region_offset()
  cxl/region: Add inject and clear poison by region offset
  cxl/core: Add locked variants of the poison inject and clear funcs
  ...
2025-10-04 12:02:50 -07:00
Linus Torvalds
67da125e30 RCU pull request for v6.18
This pull request contains the following branches, non-octopus merged:
 
 Documentation updates:
 
   - Update whatisRCU.rst and checklist.rst for recent RCU API additions.
 
   - Fix RCU documentation formatting and typos.
 
   - Replace dead Ottawa Linux Symposium links in RTFP.txt.
 
 Miscellaneous RCU updates:
 
   - Document that rcu_barrier() hurries RCU_LAZY callbacks.
 
   - Remove redundant interrupt disabling from
     rcu_preempt_deferred_qs_handler().
 
   - Move list_for_each_rcu from list.h to rculist.h, and adjust the
     include directive in kernel/cgroup/dmem.c accordingly.
 
   - Make initial set of changes to accommodate upcoming system_percpu_wq
     changes.
 
 SRCU updates:
 
   - Create an srcu_read_lock_fast_notrace() for eventual use in tracing,
     including adding guards.
 
   - Document the reliance on per-CPU operations as implicit RCU readers
     in __srcu_read_{,un}lock_fast().
 
   - Document the srcu_flip() function's memory-barrier D's relationship
     to SRCU-fast readers.
 
   - Remove a redundant preempt_disable() and preempt_enable() pair from
     srcu_gp_start_if_needed().
 
 Torture-test updates:
 
   - Fix jitter.sh spin time so that it actually varies as advertised.
     It is still quite coarse-grained, but at least it does now vary.
 
   - Update torture.sh help text to include the not-so-new --do-normal
     parameter, which permits (for example) testing KCSAN kernels without
     doing non-debug kernels.
 
   - Fix a number of false-positive diagnostics that were being triggered
     by rcutorture starting before boot completed.  Running multiple
     near-CPU-bound rcutorture processes when there is only the boot CPU
     is after all a bit excessive.
 
   - Substitute kcalloc() for kzalloc().
 
   - Remove a redundant kfree() and NULL out kfree()ed objects.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmjWzFcTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jAUeD/4xp/3rvVlfX6UB1ax/lYbQopOm2Hns
 7DVO/lp8ih6jUFCRappw7do+jbU3EcP+76sGUd5qkKlRbJIierTHBrolULpKph/p
 hQ/LddPYIHg+bPtbq/vA6fFwFI/xwbBNQOMS1bWzzU5iWn/p/ETS1kWptz+g2wk5
 pOxx9PnH52Ls5BgCCnb8kGpUuG3cy63sFb52ORrN206EaUq59Q12CLA7aTge4QGV
 3fvBIv+U+chagELG0usoPPTC+fMUt8oj8vfVYyDqUPjoyxATDtvxAv7ORFI7ZmEm
 CVemKrHWEaVEERfXSSbMp0TpPrNnkB4SoYOGT6vakyjgpcQHLh0GMaUZfluvyROt
 nQNaQFbOLfh9GGBjZQpAu1Aa2aAvMcOxyrL1JPhvwFVT0G4hF6s4Zs0zLY7+MAPD
 XT0wSf79U4lTzlg4eNrwZazoFGIeUhwyH2X59yc04yXytM7QUBFw+7XIK/PA8Wn4
 LgJYrwn6poFinGT2HlwKPrIUKSfCpLS8ePutmMgMUqLhiVtKvoaE6S38h2T97d9i
 OuLFDVMm+j0awMadS3cJD5kqtGVbqnPsUuaC3OFlpyng8K+OHHTNCfcFMiMbhgdw
 w6cMioYdq/a9mLoN6T50ylvTOKeoKWxXI4X6q6x7vZYUztMpFby+b5mTTbR12dJs
 LSqHR8QGSIpNmQ==
 =FEf1
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux

Pull RCU updates from Paul McKenney:
 "Documentation updates:

   - Update whatisRCU.rst and checklist.rst for recent RCU API additions

   - Fix RCU documentation formatting and typos

   - Replace dead Ottawa Linux Symposium links in RTFP.txt

  Miscellaneous RCU updates:

   - Document that rcu_barrier() hurries RCU_LAZY callbacks

   - Remove redundant interrupt disabling from
     rcu_preempt_deferred_qs_handler()

   - Move list_for_each_rcu from list.h to rculist.h, and adjust the
     include directive in kernel/cgroup/dmem.c accordingly

   - Make initial set of changes to accommodate upcoming
     system_percpu_wq changes

  SRCU updates:

   - Create an srcu_read_lock_fast_notrace() for eventual use in
     tracing, including adding guards

   - Document the reliance on per-CPU operations as implicit RCU readers
     in __srcu_read_{,un}lock_fast()

   - Document the srcu_flip() function's memory-barrier D's relationship
     to SRCU-fast readers

   - Remove a redundant preempt_disable() and preempt_enable() pair from
     srcu_gp_start_if_needed()

  Torture-test updates:

   - Fix jitter.sh spin time so that it actually varies as advertised.
     It is still quite coarse-grained, but at least it does now vary

   - Update torture.sh help text to include the not-so-new --do-normal
     parameter, which permits (for example) testing KCSAN kernels
     without doing non-debug kernels

   - Fix a number of false-positive diagnostics that were being
     triggered by rcutorture starting before boot completed. Running
     multiple near-CPU-bound rcutorture processes when there is only the
     boot CPU is after all a bit excessive

   - Substitute kcalloc() for kzalloc()

   - Remove a redundant kfree() and NULL out kfree()ed objects"

* tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
  rcu: WQ_UNBOUND added to sync_wq workqueue
  rcu: WQ_PERCPU added to alloc_workqueue users
  rcu: replace use of system_wq with system_percpu_wq
  refperf: Set reader_tasks to NULL after kfree()
  refperf: Remove redundant kfree() after torture_stop_kthread()
  srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed()
  srcu: Document srcu_flip() memory-barrier D relation to SRCU-fast
  srcu: Document __srcu_read_{,un}lock_fast() implicit RCU readers
  rculist: move list_for_each_rcu() to where it belongs
  refscale: Use kcalloc() instead of kzalloc()
  rcutorture: Use kcalloc() instead of kzalloc()
  docs: rcu: Replace multiple dead OLS links in RTFP.txt
  doc: Fix typo in RCU's torture.rst documentation
  Documentation: RCU: Retitle toctree index
  Documentation: RCU: Reduce toctree depth
  Documentation: RCU: Wrap kvm-remote.sh rerun snippet in literal code block
  rcu: docs: Requirements.rst: Abide by conventions of kernel documentation
  doc: Add RCU guards to checklist.rst
  doc: Update whatisRCU.rst for recent RCU API additions
  rcutorture: Delay forward-progress testing until boot completes
  ...
2025-10-04 11:28:45 -07:00
Linus Torvalds
48e3694ae7 printk changes for 6.18
-----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmjeOX8bFIAAAAAABAAO
 bWFudTIsMi41KzEuMTEsMiwyAAoJEFKgDEdIgJTyM7MP/0mD0oJa/8DRiZ0r1qLM
 xt/mCZIXhbqfJdCIaLEpfL35qPI59PWvrECGxwzL7CXOHlORxoCW98LoUDkigRKW
 e93mv8xSBaac11QrMSy32cEMSpzXmcNjz5u/02AUveXpxERr82nLgGwKY8eF0eAy
 7wF+N4bGHPShEy2J7kVFVrgZompFQLDgPB3/GycSdKsZd7ss9XiKa/EWvPJbEGOD
 CNC0MlAd5QDxVXxhioC9g9tZaUENZrqxys1vfROFx8RlaobRa2Vt/TEJQ5WCzmKo
 JO8JdojD03h0U2DdFE/lgTjf/lz8hTiaRaTifNnhUofqvzFKupzcv9L2xq/zmpfC
 4dMW6YOObD/FVeNVsgVC16/1WDKl+XfyogAmtTBjSNoPd6WoSczZsfubxGc30lW4
 AqJ2OpPa+CXq2elL+Qb0dLVekMhNytjfYdyFK/FP0DXrkoV4FMHdfNLW58TR7Pcq
 iN1MNEkEs4dWSbn2xJzKlFQyVq2/t6A6l5N/kodZ1xLWiwFYzeA3FTOVzrOlXnde
 IAYh3iH2WoTiHjZB/oomhnXKCMeTIvMYsGQQl4y+XqRHIwpEjSjcm8/M3hvlMyJE
 m0D6cpW8IRLoZ0raxqJPVpXR3WZsLJm2InGMrfY/tPWTU7L5uxmF51GPXYKdUmpZ
 NUgzh2cOwSWWU4UHt/AiD9cd
 =uFn0
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Add KUnit test for the printk ring buffer

 - Fix the check of the maximal record size which is allowed to be
   stored into the printk ring buffer. It prevents corruptions of the
   ring buffer.

   Note that printk() is on the safe side. The messages are limited by
   1kB buffer and are always small enough for the minimal log buffer
   size 4kB, see CONFIG_LOG_BUF_SHIFT definition.

* tag 'printk-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: ringbuffer: Fix data block max size check
  printk: kunit: support offstack cpumask
  printk: kunit: Fix __counted_by() in struct prbtest_rbdata
  printk: ringbuffer: Explain why the KUnit test ignores failed writes
  printk: ringbuffer: Add KUnit test
2025-10-04 11:13:11 -07:00
Linus Torvalds
b41048485e mm/mm_init: simplify deferred initialization of struct pages
Refactor and simplify deferred initialization of the memory map.
 
 Beside the negative diffstat it gives 3ms (55ms vs 58ms) reduction in the
 initialization of deferred pages on single node system with 64GiB of RAM.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmjg5awQHHJwcHRAa2Vy
 bmVsLm9yZwAKCRA5A4Ymyw79kcgsB/0fnrzF18rUvPWPeCMm3D8taDl74U8qTOp7
 RcxaFa+EQZJZmYp3QkBGs/LPYPAuOn1uUlJny9dPqk3XSg//yxSdTH35++mvCL3s
 gTOGEsckQPGzavD30VX9XJ0BXNwVNbpfZcH6Ga9dGY25cGG24Zi9Uln6qx8f6fu8
 /qV92aQaNL27mLVjbb4h/c2yNbmQHdwFa42OObTPLqNPp5O8UXK3/Bk1gZ/3jDdX
 DPWq5P56S0QichAmcFnPfEUjUzCRSzJdDJsoGQuD2G4Ves/Z2BH7Avik1LxM5kQw
 dVl47icFi0esBEe41WQQu18u/2eRDqw9Urz3MZ3v/aGiCh7Oq3NQ
 =GDe0
 -----END PGP SIGNATURE-----

Merge tag 'memblock-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock

Pull mm-init update from Mike Rapoport:
 "Simplify deferred initialization of struct pages

  Refactor and simplify deferred initialization of the memory map.

  Beside the negative diffstat it gives 3ms (55ms vs 58ms) reduction in
  the initialization of deferred pages on single node system with 64GiB
  of RAM"

* tag 'memblock-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: drop for_each_free_mem_pfn_range_in_zone_from()
  mm/mm_init: drop deferred_init_maxorder()
  mm/mm_init: deferred_init_memmap: use a job per zone
  mm/mm_init: use deferred_init_memmap_chunk() in deferred_grow_zone()
2025-10-04 11:03:10 -07:00