Amery Hung says:
====================
Fix effective prog array indexing with BPF_F_PREORDER
This patchset fixes a cgroup effective-array indexing bug where
replace_effective_prog() and purge_effective_progs() used a linear hlist
position that doesn't match the array layout when BPF_F_PREORDER
programs are present, corrupting the array on link update and risking a
use-after-free in the detach fallback. It computes the slot via a shared
effective_prog_pos() helper and adds a cgroup_preorder selftest.
Changelog
v1 -> v2:
- Also fix purge_effective_progs(), in addition to
replace_effective_prog() (Sashiko).
- selftest: Set err on bpf_link_create() failure so the failure is
reported to the caller (Sashiko).
====================
Link: https://patch.msgid.link/20260619063520.2690547-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a cgroup_preorder case that attaches a normal and a BPF_F_PREORDER
program to a cgroup (effective order [2, 1]), then replaces the normal
link's program via bpf_link_update() and checks the effective order
becomes [2, 3] — i.e. only the non-preorder slot changes. Without the
replace_effective_prog() fix the array is corrupted and the order is
wrong.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260619063520.2690547-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
replace_effective_prog() and purge_effective_progs() located the slot in
the effective array by walking the program hlist and counting entries
linearly. That count does not match the array layout: compute_effective_
progs() places BPF_F_PREORDER programs at the front (ancestor cgroup
first, attach order within a cgroup) and the rest after them (descendant
cgroup first). So when a preorder program is present, the linear hlist
position no longer equals the program's index in the effective array.
For replace_effective_prog() (bpf_link_update()) this overwrote the
wrong slot, corrupting the effective order. For purge_effective_progs(),
it could dummy out a slot belonging to a different program and leave the
detached program in the array while bpf_prog_put() drops its reference,
i.e. a use-after-free.
Fix both by replaying compute_effective_progs()'s placement (including
the per-cgroup preorder reversal) in a shared effective_prog_pos()
helper. Identify the entry by its struct bpf_prog_list pointer rather
than by (prog, link) value, so the lookup resolves to exactly the
attachment the syscall selected even when the same bpf_prog is attached
to several cgroups in the hierarchy.
Fixes: 4b82b181a2 ("bpf: Allow pre-ordering for bpf cgroup progs")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260619063520.2690547-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When struct prog_assoc_struct_ops was added,
BPF_PROG_ASSOC_STRUCT_OPS_LAST_FIELD referenced prog_fd instead of the
actual last field, flags.
Fixes: b5709f6d26 ("bpf: Support associating BPF program with struct_ops")
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260618040934.4113938-1-tweek@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_ipv4_fib_lookup() and bpf_ipv6_fib_lookup() build the flow key on
the stack with a bare "struct flowi4 fl4;" / "struct flowi6 fl6;" and
fill it field by field, but never set flowi4_l3mdev / flowi6_l3mdev.
On the non-DIRECT path the lookup goes through the fib rules whenever the
netns has custom rules, which a VRF installs:
bpf_ipv4_fib_lookup() -> fib_lookup() -> __fib_lookup()
-> l3mdev_update_flow() reads !fl->flowi_l3mdev
-> fib_rules_lookup() -> fib_rule_match()
-> l3mdev_fib_rule_match() uses fl->flowi_l3mdev
l3mdev_update_flow() resolves the l3mdev master from the ingress device
only while the field is still zero. Left at a nonzero stack value the
resolution is skipped, and l3mdev_fib_rule_match() then tests that value
as an ifindex, so the VRF master is not resolved and the rule fails to
match: an ingress enslaved to a VRF can fail to select its table. FIB
rules matching on an L3 master device (l3mdev_fib_rule_iif_match()/
_oif_match()) read the same value, so an "ip rule iif/oif <vrf>"
mismatches the same way.
Zero-initialize the whole flow struct rather than adding one more
field assignment, so any flowi field added later is covered too.
ip_route_input_slow() likewise zeroes the field before its input lookup.
CONFIG_INIT_STACK_ALL_ZERO masks this by default, but it depends on
compiler support (CC_HAS_AUTO_VAR_INIT_ZERO), so INIT_STACK_NONE builds,
including older toolchains that fall back to it, are exposed. Built with
INIT_STACK_ALL_PATTERN, a plain bpf_fib_lookup (no VLAN, no DIRECT) over a
VRF slave whose destination is routed only in the VRF table returns
BPF_FIB_LKUP_RET_NOT_FWDED, and resolves with this patch. On the default
config the lookup succeeds either way, so ordinary testing does not catch
the bug.
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20260617224719.1428599-1-avinash.duduskar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool cgroup show and tree call libbpf_find_kernel_btf() to
resolve attach_btf names, but never release the returned BTF object.
For cgroup tree, do_show_tree_fn() is called once for each cgroup
visited by nftw(). When more than one cgroup has attached programs,
each callback overwrites btf_vmlinux with a new object and loses the
previous allocation.
Load vmlinux BTF only once during a tree walk and release it when
cgroup show or tree completes. Reset btf_vmlinux_id at the same time
so batch mode starts with clean state.
Fixes: 596f5fb2ea ("bpftool: implement cgroup tree for BPF_LSM_CGROUP")
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/24357C69B4405079+20260617090117.280222-1-chenyichong@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm commit [1] allowed attaching type tag records to modifier BTF
records. This is useful for using typedefs that encompass a base type
and a type tag, e.g.:
typedef struct rbtree __arena rbtree_t;
Modify btf_check_type_tags() so that it allows this sequence of records.
The function now only checks for record loops in BTF modifier record
chains. Rename to btf_check_modifier_chain_length to reflect this.
Also expand the BTF modifier traversal code to take into account that
type record can be interleaved with other modifier records. In effect
this means traversing all modifiers to collect the type tags.
Also modify existing selftests to now accept modifier records (const,
typedef) that point to type tag records.
[1] https://github.com/llvm/llvm-project/pull/203089
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260616061454.7869-1-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When BPF_WRITE goes through a PTR_TO_BTF_ID register, check_ptr_to_btf_access()
delegates to env->ops->btf_struct_access(). Most implementations
(bpf_scx_btf_struct_access, tc_cls_act_btf_struct_access, etc.) return
-EACCES for disallowed fields without logging anything, so the verifier
rejects the program with an empty message. For example a scx program doing
1: R1=trusted_ptr_task_struct()
...
4: (7b) *(u64 *)(r1 +0) = r2
verification time 83 usec
the program is rejected
leaves the user guessing which field is off-limits.
Emit verbose message.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260615232146.5491-1-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch is a follow up to recent implementation of
stack_map_get_build_id_offset_sleepable() [1].
stack_map_get_build_id_offset() and its sleepable variant each cached
only the last successfully resolved VMA, with separate bookkeeping in
each function. A run of IPs in a VMA with no usable build ID will
repeat the lookup for every frame: find_vma() in the non-sleepable
path, a VMA lock and a blocking build_id_parse_file() in the sleepable.
Factor the per-call cache into a shared struct stack_map_build_id_cache
with two independent slots [2][3], used by both functions:
* resolved - last VMA that produced a build ID (file, build_id and
range), reused to skip the lookup and the parse;
* unresolved - last VMA with no usable build ID (range only), reused to
emit a raw IP without another lookup or parse.
Keeping the slots independent means a build-ID-less VMA no longer evicts
the last resolved build ID, so a trace alternating between a binary and a
region without one stops re-resolving the binary on every return.
The shared lookup tests [vm_start, vm_end), matching the sleepable path;
the non-sleepable path previously reused a build ID for ip == vm_end
(range_in_vma() is inclusive) and now re-resolves it correctly.
[1] https://lore.kernel.org/bpf/20260525223948.1920986-1-ihor.solodrai@linux.dev/
[2] https://lore.kernel.org/bpf/CAEf4Bza2fRDGhLQoPE-EzM7F34xaEJfi5Exmxb-iWVUN3F06=g@mail.gmail.com/
[3] https://lore.kernel.org/bpf/CAEf4BzZXJFr=1iiVx937ht=4PYQkQHg=eFk810zhMDzXQG3ihw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260615195536.1065107-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For non-linear test_run output, bpf_test_finish() derives the linear
data copy length from copy_size - frag_size. This only matches the
linear data length when copy_size is the full packet size.
When userspace provides a short data_out buffer, copy_size is clamped to
that buffer size. If copy_size is smaller than frag_size, the computed
length becomes negative and bpf_test_finish() returns -ENOSPC before
copying the packet prefix or updating data_size_out.
Compute the linear data length from the packet layout instead, and clamp
the linear copy length to copy_size. This preserves the expected
partial-copy semantics: return -ENOSPC, copy the packet prefix that fits
in data_out, and report the full packet length through data_size_out.
Fixes: 7855e0db15 ("bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260617093557.63880-2-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Nuoqi Gui says:
====================
bpf: Fix stack slot index for Spectre v4 nospec checks
check_stack_write_fixed_off() uses one byte-indexing scheme when checking
whether a fixed-offset stack write needs Spectre v4 sanitization, and another
scheme when recording the write into slot_type[].
For sub-8-byte writes this can make the sanitization check look at bytes that
are not overwritten by the write. A zeroed lower half-slot followed by a write
to the upper half-slot can therefore miss the nospec barrier for the second
write.
Use the same stack-byte index for the sanitization check and the slot update,
and add a focused verifier selftest that expects both half-slot writes to emit
nospec through the unprivileged loader lane.
Bounded impact: this fixes verifier/JIT Spectre v4 mitigation emission for a
fixed-offset stack-write corner case. No architectural verifier memory-safety
bypass, exploit chain, CVE, embargo, or security escalation is claimed.
Fixes: 2039f26f3a ("bpf: Fix leakage due to insufficient speculative store bypass mitigation")
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
---
Changes in v3:
- selftests/bpf: drop the stray space in the __xlated_unpriv stack-store
expectations ("(r10 - 4)"/"(r10 - 8)" -> "(r10 -4)"/"(r10 -8)")
- Link to v2: https://lore.kernel.org/bpf/20260618-f01-11-stack-nospec-slot-index-v2-0-ede9495359b6@mails.tsinghua.edu.cn/
Changes in v2:
- drop __caps_unpriv(CAP_BPF) from the selftest
- fix selftest style
- use Fixes: 2039f26f3a per review
- Link to v1: https://lore.kernel.org/bpf/20260617-f01-11-stack-nospec-slot-index-v1-0-e3a080b0cd7e@mails.tsinghua.edu.cn/
====================
Link: https://patch.msgid.link/20260618-f01-11-stack-nospec-slot-index-v3-0-780297041721@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a verifier test for the fixed-offset stack write case where two 4-byte
stores initialize opposite halves of the same stack slot.
The test runs through the unprivileged loader lane and expects both
half-slot writes to emit nospec in the translated program.
Acked-by: Luis Gerhorst <luis.gerhorst@fau.de>
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/r/20260618-f01-11-stack-nospec-slot-index-v3-2-780297041721@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_stack_write_fixed_off() computes the byte slot for a fixed-offset
stack write as -off - 1, and records each written byte in slot_type[] with
(slot - i) % BPF_REG_SIZE.
The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a
4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the
pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates
bytes 7..4. That can leave the second half-slot write without nospec_result
even though the bytes being overwritten still require sanitization.
Use the same slot index in the sanitization pre-check that the write path uses
when updating slot_type[].
Fixes: 2039f26f3a ("bpf: Fix leakage due to insufficient speculative store bypass mitigation")
Acked-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/r/20260618-f01-11-stack-nospec-slot-index-v3-1-780297041721@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Karel Balej <balejk@matfyz.cz> # for Marvell 88PM886
Link: https://patch.msgid.link/d14b9076b2c7703708bcc5cc35f339cd97fc10cd.1779950275.git.u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Instead of hiding the rtc ops for the only supported device behind an
abstraction for multi-device support, hardcode the used ops which gets rid
of the need to call platform_get_device_id and two casts.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/a909d3c59d00756130ac16051ceedbec0ce9cec7.1779950275.git.u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The two drivers explicitly set the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop this
unused assignments.
While touching these array unify spacing, usage of commas and use named
initializers for .name.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/9ec7a174605a17dd19c011ee2253de28d09b02bd.1779950275.git.u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Tóth János <gomba007@gmail.com>
Link: https://patch.msgid.link/20260515154720.406128-2-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prior to commit 4845865465 ("rtc: ds1307: remove clear of oscillator
stop flag (OSF) in probe"), the oscillator stop flag (OSF) bit was
checked during device probe for the ds1337, ds1339, ds1341, and ds3231
chips; if it was set, it would be cleared and a warning would be logged
saying "SET TIME!". Since that commit, the OSF bit is no longer cleared,
but the warning is still printed.
Directly following that commit, there was no way to get rid of this
warning because nothing cleared the OSF bit on these chips.
The commit associated with the previous commit, 523923cfd5 ("rtc:
ds1307: handle oscillator stop flag (OSF) for ds1341"), made proper use
of the OSF when getting and setting the time in the RTC. However, the
other RTC variants ds1337, ds1339 and ds3231 didn't have a corresponding
change made.
Given that the OSF bit is no longer cleared at probe time when it is
set, the remaining three chips should have the same handling as the
ds1341 chip has for the OSF bit.
Fix the issue on the ds1337, ds1339 and ds3231 chips by applying the
same logic as the ds1341 has to these chips.
Note that any devices brought up between the first referenced commit and
this one may begin mistrusting the time reported by the RTC until it is
set again, if the bit was never explicitly cleared.
Note that only the ds1339 was tested with this change, but the
datasheets for the other chips contain essentially identical
descriptions of the OSF bit so the same change should work.
Signed-off-by: Ronan Dalton <ronan.dalton@alliedtelesis.co.nz>
Cc: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Fixes: 4845865465 ("rtc: ds1307: remove clear of oscillator stop flag (OSF) in probe")
Reviewed-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Link: https://patch.msgid.link/20260508032518.3696705-2-ronan.dalton@alliedtelesis.co.nz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The condition that needs to be checked for upload completion is the
UPLOAD bit in the completion register going low. The original iterations
of this driver used a do-while and this was converted to a
read_poll_timeout() during upstreaming without the condition being
inverted as it should have been.
I suspect that this went unnoticed until now because a) the first read
was done when the bit was still set, immediately completing the
read_poll_timeout() and b) because the RTC doesn't hold time when power
is removed from the SoC reducing its utility (I for one keep it
disabled). If my first suspicion was true when the driver was
upstreamed, it's not true any longer though, hence the detection of the
problem.
Fixes: 0b31d70359 ("rtc: Add driver for Microchip PolarFire SoC")
CC: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Link: https://patch.msgid.link/20260513-panhandle-ashy-70c6abf84d59@spud
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC_VL_CLR ioctl intends to clear only the battery low flag (BLF),
however the current implementation writes 0 to the status register,
clearing all status bits.
Fix this by writing back the masked status value so that only BLF is
cleared, preserving other status flags.
Fixes: ffe1c5a2d4 ("rtc: abx80x: Implement RTC_VL_READ,CLR ioctls")
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://patch.msgid.link/20260415160610.127155-2-apokusinski01@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The logic to decode the year value from the hardware registers is
duplicated in both rtca3_read_time() and rtca3_read_alarm().
Introduce a helper rtca3_decode_year() to centralize this conversion.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In rtca3_initial_setup(), the driver clears the RTCA3_RADJ register and
waits for it to reach zero using readb_poll_timeout(). Check the return
value of readb_poll_timeout() and propagate the error if the poll fails.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In rtca3_set_alarm(), the setup_failed path attempts to disable the
Periodic Interrupt Enable (PIE) bit and wait until it is cleared.
However, the polling condition passed to readb_poll_timeout_atomic()
uses an incorrect expression:
!(tmp & ~RTCA3_RCR1_PIE)
As ~RTCA3_RCR1_PIE evaluates to a mask of all bits except PIE, the
condition effectively waits for all non-PIE bits to become zero, which
is unrelated to the intended operation and is unlikely to ever be true.
This causes the poll to time out unnecessarily.
Fix the condition to check for the PIE bit itself being cleared:
!(tmp & RTCA3_RCR1_PIE)
This correctly waits until PIE is deasserted after being cleared.
Fixes: d448837760 ("rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the Epson RX6110 Real Time Clock devicetree binding
from the legacy text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514173851.25088-1-challauday369@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/ajLy2brwvOZEFNNN@gsse-cloud1.jf.intel.com
state, and PLL sequencing.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmoyb9gACgkQ+mJfZA7r
E8pYdwf/W2yy6bNSoUMe8bL6bZzoxHygFSfiNupqHtE9E19LulAaQDcNVjySeWj4
OXrXOkTy2FjtsV4Q9pJJX2cZpAN4TdcDMgB+BRdn+4Z5sja7cGRXmHtIkgHjLzPJ
4TnR/eyKl5+dNZCU/W+W7wX+rUmknnkFUemifOQAC110ts6IYFaNIw94MPAZ3PT0
h5RplS3d54NJs8ma5G/C+u+qMuU8ZIOa5ES32WpNwsDkIVfeyt8sDmEffPCeFxya
RrOC1xp3Bfxh0CuM40NOkZtlBdmLj6Q2oN8L3RruelsWLtfEzS9NarlAkChFLtEJ
Y1Nozk1Lye2FGCOqJsF6YqJ8W713JA==
=GMAa
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2026-06-17' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Only a few simple display fixes around DP MST, CRTC color
state, and PLL sequencing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/ajJxbrt3a_USBecY@intel.com
- use scoped_guard() for RCU read critical section in
z_erofs_decompress_kickoff();
- simplify the RCU critical section loop in
z_erofs_pcluster_begin().
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Although zeros can be compressed transparently on EROFS using fixed-size
output compression so that it is never prioritized in the Android use
cases, indicating entire pclusters as holes is still useful to preserve
holes in the sparse datasets; otherwise overlayfs will allocate more
space when copying up, and SEEK_HOLE won't report any hole.
This patch introduces two ways to mark a pcluster as a hole:
- A new Z_EROFS_LI_HOLE compatible flag (bit 14) in the HEAD lcluster
advise field for non-compact (full) indexes;
- A 0-block CBLKCNT value on the first NONHEAD lcluster.
The hole tag is preferred for maximum compatibility since pre-existing
kernels that do not understand Z_EROFS_LI_HOLE will decompress at the
stored blkaddr (the same blkaddr will be shared among all sparse
pclusters). Only the 0-block CBLKCNT approach also works for compact
indexes, but it is limited to big pclusters and new kernels.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The dpaa2-switch driver does not support VLAN uppers while its ports are
bridged. This scenario tried to be prevented by rejecting a bridge join
while VLAN uppers exist but the reverse order was still possible.
This patches adds a check so that the dpaa2-switch also does not accept
VLAN uppers while bridged.
Fixes: f48298d3fb ("staging: dpaa2-switch: move the driver out of staging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260618092813.432535-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IOAM uses a dummy dst_entry(null_dst) to mark that the destination should
not be changed after the transformation. This dst is stored in the IOAM lwt
state and may be passed to dst_cache_set_ip6().
However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which
treats the dst_entry as part of a struct rt6_info. Since the null_dst was
embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted
in an invalid cast and rt6_get_cookie() reading fields from the wrong
object.
In practice, the wrong cookie is not used while dst->obsolete is zero, but
rt6_get_cookie() may also access per-cpu value when rt->sernum is
zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which
can become zero, making this a potential invalid pointer access.
Fix this by embedding a full struct rt6_info for the dummy IPv6 route and
passing its dst member to the dst APIs.
Fixes: 47ce7c8545 ("net: ipv6: ioam6: fix double reallocation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260618104336.48934-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe91 ("ipv6:
avoid partial copy for zc"). Before commit ce650a1663 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check.
Fixes: 773ba4fe91 ("ipv6: avoid partial copy for zc")
Signed-off-by: Jungwoo Lee <jwlee2217@gmail.com>
Signed-off-by: Wongi Lee <qw3rtyp0@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/ajFTqRljatR17fFy@DESKTOP-19IMU7U.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __ip_append_data(), when the paged-allocation branch is taken,
alloclen and pagedlen are computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap, but the fraggap bytes carried over
from the previous skb are copied into the new skb's linear area at
offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The
linear area is therefore undersized by fraggap bytes while pagedlen is
overstated by the same amount.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Fixes: 8eb77cc739 ("ipv4: avoid partial copy for zc")
Signed-off-by: Jungwoo Lee <jwlee2217@gmail.com>
Signed-off-by: Wongi Lee <qw3rtyp0@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/ajFR1eLAIs42TN3g@DESKTOP-19IMU7U.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for DualPI2 GSO backlog accounting when it is
used as a child qdisc of QFQ.
The test sends one UDP GSO datagram through a QFQ class with DualPI2 as
the leaf qdisc. DualPI2 splits the skb into two segments. After the
traffic drains, both QFQ and DualPI2 must report zero backlog and zero
qlen.
On kernels with the broken accounting, QFQ can keep a stale non-zero
qlen after all real packets have been dequeued.
Signed-off-by: Xingquan Liu <b1n@b1n.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260619151447.223640-2-b1n@b1n.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued.
Fixes: 8f9516daed ("sched: Add enqueue/dequeue of dualpi2 qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Xingquan Liu <b1n@b1n.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260619151447.223640-1-b1n@b1n.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev)
and dereferences idev->cnf.accept_untracked_na without a NULL check,
even though its only caller ndisc_recv_na() already fetched and
NULL-checked idev for the same device.
Both reads of dev->ip6_ptr run in the same RCU read-side critical
section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr
between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown()
without the synchronize_net() that orders the unregister path, so the
re-fetch returns NULL and oopses:
BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974)
Read of size 4 at addr 0000000000000364
Call Trace:
<IRQ>
ndisc_recv_na (net/ipv6/ndisc.c:974)
icmpv6_rcv (net/ipv6/icmp.c:1193)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479)
ip6_input_finish (net/ipv6/ip6_input.c:534)
ip6_input (net/ipv6/ip6_input.c:545)
ip6_mc_input (net/ipv6/ip6_input.c:635)
ipv6_rcv (net/ipv6/ip6_input.c:351)
</IRQ>
It is reachable by an unprivileged user via a network namespace.
Pass the caller's already validated idev instead of re-fetching it; the
idev stays alive for the whole RCU critical section, so it is safe even
after dev->ip6_ptr has been cleared.
Fixes: aaa5f515b1 ("net: ipv6: new accept_untracked_na option to accept na only if in-network")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260617065512.2529757-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers.
Fixes: 5e6700b3bf ("sit: add support of x-netns")
Link: https://lore.kernel.org/netdev/20260612085941.3158249-1-maoyixie.tju@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260618070817.3378283-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In airoha_dev_select_queue(), the expression:
queue = (skb->priority - 1) % AIROHA_NUM_QOS_QUEUES;
implicitly converts to unsigned arithmetic: when skb->priority is 0
(the default for unclassified traffic), (0u - 1u) wraps to UINT_MAX,
and UINT_MAX % 8 = 7, routing default best-effort packets to the
highest-priority QoS queue. This causes QoS inversion where the
majority of traffic on a PON gateway starves actual high-priority
flows (VoIP, gaming, etc.).
The "- 1" offset was a leftover from the ETS offload implementation
that has since been removed. The correct mapping is a direct modulo:
queue = skb->priority % AIROHA_NUM_QOS_QUEUES;
This maps priority 0 → queue 0 (lowest), priority 7 → queue 7
(highest), with higher priorities wrapping around. This is the
standard Linux sk_prio → HW queue mapping used by other drivers.
Fixes: 2b288b8156 ("net: airoha: Introduce ndo_select_queue callback")
Link: https://lore.kernel.org/netdev/178185573207.2378135.3729126358670287878@gmail.com/
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/178194366700.2485734.5368768965976693502@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when
TCA_CT_LABELS is present, but two later error sites use a bare return
instead of "goto err", skipping the err: nf_connlabels_put() cleanup.
They also precede the "p->put_labels = put_labels" assignment, so the
tcf_ct_params_free() fallback does not release the count either. Each
failed RTM_NEWACTION on these paths leaks one nf_connlabels reference:
net->ct.labels_used is incremented and never released. The action is
reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged
user namespace on default-userns kernels.
Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace
(e.g. via user namespaces) leaks one nf_connlabels reference per failed
RTM_NEWACTION on the two error paths; net->ct.labels_used is never
released.
The err: label is safe to reach from both sites: p->tmpl is still NULL
there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so
no inline release is needed.
Fixes: 70f06c115b ("sched: act_ct: switch to per-action label counting")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260617215708.1115818-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devm_request_irq() after devm_platform_ioremap_resource() so that
dev->emacp is mapped before the interrupt handler can fire. An early
interrupt hitting emac_irq() would dereference the NULL dev->emacp and
crash.
Also remove redundant error message. devm_platform_ioremap_resource()
already returns an error message with dev_err_probe().
Fixes: dcc34ef7c8 ("net: ibm: emac: manage emac_irq with devm")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260618023405.415644-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2026-06-20
An overdue pull request for ieee802154, catching up on all the AI found issues
at last.
Shitalkumar Gandhi fixed problems in the ca8210 driver for cases where we could
have a leak or a pointer truncation.
Robertus Diawan Chris made sure we do not overwrite the return code when
associating.
Michael Bommarito worked on properly gating our netlink API use in the llsec
security context.
Ivan Abramov cleaned up the netns cases as he did in other subsystems.
Doruk Tan Ozturk ensures we have the correct skn ready in cryptoo operation (to
avoid a silent overwrite).
Aleksandr Nogikh fixed a kernel-infoleak detected by syzbot.
* tag 'ieee802154-for-net-next-2026-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: allow legacy LLSEC ADD/DEL ops to pass strict validation
ieee802154: admin-gate legacy LLSEC dump operations
mac802154: Prevent overwrite return code in mac802154_perform_association()
ieee802154: fix kernel-infoleak in dgram_recvmsg()
mac802154: llsec: add skb_cow_data() before in-place crypto
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ieee802154: Remove WARN_ON() in cfg802154_pernet_exit()
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
ieee802154: Restore initial state on failed device_rename() in cfg802154_switch_netns()
====================
Link: https://patch.msgid.link/20260620174903.1010671-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- gw: don't deselect gateway with active hardif
- TTL fixes in bcast/mcast and fragmentation handling (4 patches)
- BATMAN V: prevent OGM aggregation on disabled hardif
- tp_meter: concurrency and range fixes, add cap to unacked list
(4 patches)
- tt: fix unchecked VLAN ID in tt for local add and roam (2 patches)
- dat: check VLAN ID in the hash
- tvlv: enforce 2-byte alignment
- tvlv: avoid race of cifsnotfound handler state
-----BEGIN PGP SIGNATURE-----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=K1KM
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260619' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes, all by Sven Eckelmann:
- gw: don't deselect gateway with active hardif
- TTL fixes in bcast/mcast and fragmentation handling (4 patches)
- BATMAN V: prevent OGM aggregation on disabled hardif
- tp_meter: concurrency and range fixes, add cap to unacked list
(4 patches)
- tt: fix unchecked VLAN ID in tt for local add and roam (2 patches)
- dat: check VLAN ID in the hash
- tvlv: enforce 2-byte alignment
- tvlv: avoid race of cifsnotfound handler state
* tag 'batadv-net-pullrequest-20260619' of https://git.open-mesh.org/batadv:
batman-adv: tvlv: avoid race of cifsnotfound handler state
batman-adv: tvlv: enforce 2-byte alignment
batman-adv: dat: prevent false sharing between VLANs
batman-adv: tt: track roam count per VID
batman-adv: tt: don't merge change entries with different VIDs
batman-adv: tp_meter: handle overlapping packets
batman-adv: tp_meter: prevent parallel modifications of last_recv
batman-adv: tp_meter: annotate last_recv_time access with READ/WRITE_ONCE
batman-adv: tp_meter: restrict number of unacked list entries
batman-adv: v: prevent OGM aggregation on disabled hardif
batman-adv: frag: avoid underflow of TTL
batman-adv: frag: ensure fragment is writable before modifying TTL
batman-adv: fix (m|b)cast csum after decrementing TTL
batman-adv: ensure bcast is writable before modifying TTL
batman-adv: gw: don't deselect gateway with active hardif
====================
Link: https://patch.msgid.link/20260619070045.438101-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On PF shutdown, the current driver free mcs hardware
resources though mcs resources are not allocated to it.
This patch checks the mcs resources status and if resources
are allocated then only sends mailbox message to free them.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1781636420-19816-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When all MCS resources mapped to a PF are being freed then clear
stats of all those resources too.
Fixes: 815debbbf7 ("octeontx2-pf: mcs: Clear stats before freeing resource")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1781636420-19816-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_alloc_free_slots() always passed NPC_MCAM_KEY_X2 into
__npc_subbank_alloc(), which must match sb->key_type, so defrag never
allocated replacement slots on X4 banks. Pass the subbank key type for
bank 0, and only extend the search into bank 1 for X2 (X4 MCAM indices
are confined to b0b..b0t).
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617102149.1309913-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
