Commit graph

1,461,726 commits

Author SHA1 Message Date
Rahul Kumar
5276688688 mtd: jedec_probe: use struct_size() helper for cfiq allocation
Documentation/process/deprecated.rst recommends against performing
dynamic size calculations in the arguments of memory allocator
functions due to the risk of overflow. Such calculations can wrap
around and result in a smaller allocation than expected.

Replace the size calculation in cfiq allocation with struct_size()
helper to make the code clearer and handle overflows correctly.

Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 18:01:43 +02:00
Gopi Krishna Menon
d496b6f42e mtd: cfi: use struct_size() helper for cfiq allocation
Documentation/process/deprecated.rst recommends against performing
dynamic size calculations in the arguments of memory allocator
function due to the risk of overflow. Such calculations can
wrap around and result in a smaller allocation than what the caller
was expecting.

Replace the size calculation in cfiq allocation with struct_size()
helper to make the code clearer and handle the overflows correctly.

Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
link: https://lore.kernel.org/linux-kernel-mentees/20250922071137.900508-1-rk0006818@gmail.com/T/#u
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 18:01:32 +02:00
Maarten Zanders
1001cc1171 mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
Commit f04ced6d54 ("mtd: nand: raw: gpmi: improve power management
handling") moved all clock handling into PM callbacks. With CONFIG_PM
disabled, those callbacks are missing, leaving the driver unusable.

Add clock init/teardown for !CONFIG_PM builds to restore basic operation.
Keeping the driver working without requiring CONFIG_PM is preferred over
adding a Kconfig dependency.

Fixes: f04ced6d54 ("mtd: nand: raw: gpmi: improve power management handling")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:56:31 +02:00
Johan Hovold
fa1f26b48f mtd: rawnand: omap2: fix device leak on probe failure
Make sure to drop the reference to the elm device taken by
of_find_device_by_node() during probe on errors and on driver unload.

Fixes: 62116e5171 ("mtd: nand: omap2: Support for hardware BCH error correction.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:55:40 +02:00
Erick Karanja
8ed4728eb9 mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
In case of a jump to the  err label due to atmel_nand_create() or
atmel_nand_controller_add_nand() failure, the reference to nand_np
need to be released

Use for_each_child_of_node_scoped() to fix the issue.

Fixes: f88fc122cc ("mtd: nand: Cleanup/rework the atmel_nand driver")

Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:55:22 +02:00
Markus Stockhausen
3148d0e5b1 mtd: nand: realtek-ecc: Add Realtek external ECC engine support
The Realtek RTl93xx switch SoC series has a built in ECC controller
that can provide BCH6 or BCH12 over 512 data and 6 tag bytes. It
generates 10 (BCH6) or 20 (BCH12) bytes of parity.

This engine will most likely work in conjunction with the Realtek
spi-mem based NAND controller but can work on its own. Therefore
the initial implementation will be of type external.

Remark! The engine can support any data blocks that are multiples
of 512 bytes. For now limit it to data+oob layouts that have been
analyzed from existing devices. This way it keeps compatibility
and pre-existing vendor data can be read.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:54:33 +02:00
Markus Stockhausen
12bfcb84dc dt-bindings: mtd: Add realtek,rtl9301-ecc
Add a dtschema for the ECC engine on the Realtek RTL93xx SoCs.
The engine supports BCH6 and BCH12 parity for 512 byte blocks.

The hardware can make use of interrupts but this is not yet
supported by the driver. From the known datasheets it is
connected to the LXB (lexra bus) and propably depends on its
clock. Provide an optional clock property that can describe
the relation.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:54:33 +02:00
Linus Torvalds
fde0ab43b9 Fix CC_HAS_ASM_GOTO_OUTPUT on non-x86 architectures
There's a silly problem with the CC_HAS_ASM_GOTO_OUTPUT test: even with
a working compiler it will fail on some architectures simply because it
uses the mnemonic "jmp" for testing the inline asm.

And as reported by Geert, not all architectures use that mnemonic, so
the test fails spuriously on such platforms (including arm and riscv,
but also several other architectures).

This issue avoided any obvious test failures because the build still
works thanks to falling back on the old non-asm-goto code, which just
generates worse code.

Just use an empty asm statement instead.

Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Fixes: e2ffa15b9b ("kbuild: Disable CC_HAS_ASM_GOTO_OUTPUT on clang < 17")
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-09-29 08:54:12 -07:00
Mikhail Kshevetskiy
010dc7f2dd mtd: spinand: repeat reading in regular mode if continuous reading fails
Continuous reading may result in multiple flash pages reading in one
operation. Unfortunately, not all spinand controllers support such
large reading. They will read less data. Unfortunately, the operation
can't be continued.

In this case:
 * disable continuous reading on this (not good enough) spi controller
 * repeat reading in regular mode.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:53:08 +02:00
Mikhail Kshevetskiy
004f8ea0d9 mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
Continuous reading may result in multiple flash pages reading in one
operation. Typically only one flash page has read/written (a little bit
more than 2-4 Kb), but continuous reading requires the spi controller
to read up to 512 Kb in one operation without toggling CS in beetween.

Roughly speaking spi controllers can be divided on 2 categories:
 * spi controllers without dirmap acceleration support
 * spi controllers with dirmap acceleration support

Firt of them will have issues with continuous reading if restriction on
the transfer length is implemented in the adjust_op_size() handler.
Second group often supports acceleration of single page only reading.
Thus enabling of continuous reading can break flash reading.

This patch tries to create dirmap for continuous reading first and
fallback to regular reading if spi controller refuses to create it.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:53:08 +02:00
Mikhail Kshevetskiy
e4a0cf9f1d mtd: spinand: fix direct mapping creation sizes
Continuous mode is only supported for data reads, thus writing
requires only single flash page mapping.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-09-29 17:53:07 +02:00
Thomas Zimmermann
d861831836 drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch according to hardware requirements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-26-tzimmermann@suse.de
2025-09-29 17:50:54 +02:00
Thomas Zimmermann
a8f81ee99f drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch
and buffer size. Align the pitch to a multiple of 8. Align the
buffer size according to hardware requirements.

Xe's internal calculation allowed for 64-bit wide buffer sizes, but
the ioctl's internal checks always verified against 32-bit wide limits.
Hance, it is safe to limit the driver code to 32-bit calculations as
well.

v3:
- mention 32-bit calculation in commit description (Matthew)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250821081918.79786-24-tzimmermann@suse.de
2025-09-29 17:50:40 +02:00
Lenny Szubowicz
99da5bf3dd efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable
Check for needed memory protection changes on EFI DXE GCD memory space
descriptors with type EfiGcdMemoryTypeMoreReliable in addition to
EfiGcdMemoryTypeSystemMemory.

This fixes a fault on entry into the decompressed kernel from the
EFI stub that occurs when the memory allocated for the decompressed
kernel is more reliable memory, has NX/XP set, and the kernel needs
to use the EFI DXE protocol to adjust memory protections.

The memory descriptors returned by the DXE protocol
GetMemorySpaceDescriptor() service use a different GCD memory type
to distinguish more reliable memory ranges from their conventional
counterparts. This is in contrast to the EFI memory descriptors
returned by the EFI GetMemoryMap() service which use the
EFI_MEMORY_MORE_RELIABLE memory attributes flag to identify
EFI_CONVENTIONAL_MEMORY type regions that have this additional
property.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-09-29 17:13:39 +02:00
Jiapeng Chong
5c34f2b6f8 nvdimm: Remove duplicate linux/slab.h header
./drivers/nvdimm/bus.c: linux/slab.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=25516
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
2025-09-29 10:06:03 -05:00
Rafael J. Wysocki
d5e58ce1fb PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
The DEFINE_FREE() for pm_runtime_put has been superseded by recently
introduced runtime PM auto-cleanup macros and its only user has been
converted to using one of the new macros, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
2025-09-29 17:01:54 +02:00
Rafael J. Wysocki
8ff5aaa7b8 PCI/sysfs: Use runtime PM guard macro for auto-cleanup
Use the newly introduced pm_runtime_active_try guard to simplify
the code and add the proper error handling for PM runtime resume
errors.

Based on an earlier patch from Takashi Iwai <tiwai@suse.de> [1].

Link: https://patch.msgid.link/20250919163147.4743-3-tiwai@suse.de [1]
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
2025-09-29 17:01:47 +02:00
Rafael J. Wysocki
9a0abc3945 PM: runtime: Add auto-cleanup macros for "resume and get" operations
It is generally useful to be able to automatically drop a device's
runtime PM usage counter incremented by runtime PM operations that
resume a device and bump up its usage counter [1].

To that end, add guard definition macros allowing pm_runtime_put()
and pm_runtime_put_autosuspend() to be used for the auto-cleanup in
those cases.

Simply put, a piece of code like below:

	pm_runtime_get_sync(dev);
	.....
	pm_runtime_put(dev);
	return 0;

can be transformed with guard() like:

	guard(pm_runtime_active)(dev);
	.....
	return 0;

(see the pm_runtime_put() call is gone).

However, it is better to do proper error handling in the majority of
cases, so doing something like this instead of the above is recommended:

	ACQUIRE(pm_runtime_active_try, pm)(dev);
	if (ACQUIRE_ERR(pm_runtime_active_try, &pm))
		return -ENXIO;
	.....
	return 0;

In all of the cases in which runtime PM is known to be enabled for the
given device or the device can be regarded as operational (and so it can
be accessed) with runtime PM disabled, a piece of code like:

	ret = pm_runtime_resume_and_get(dev);
	if (ret < 0)
		return ret;
	.....
	pm_runtime_put(dev);
	return 0;

can be changed as follows:

	ACQUIRE(pm_runtime_active_try, pm)(dev);
	ret = ACQUIRE_ERR(pm_runtime_active_try, &pm);
	if (ret < 0)
		return ret;
	.....
	return 0;

(again, see the pm_runtime_put() call is gone).

Still, if the device cannot be accessed unless runtime PM has been
enabled for it, the pm_runtime_active_try_enabled guard variant
needs to be used, that is (in the context of the example above):

	ACQUIRE(pm_runtime_active_try_enabled, pm)(dev);
	ret = ACQUIRE_ERR(pm_runtime_active_try_enabled, &pm);
	if (ret < 0)
		return ret;
	.....
	return 0;

When the original code calls pm_runtime_put_autosuspend(), use one
of the "auto" guard variants, pm_runtime_active_auto/_try/_enabled,
so for example, a piece of code like:

	ret = pm_runtime_resume_and_get(dev);
	if (ret < 0)
		return ret;
	.....
	pm_runtime_put_autosuspend(dev);
	return 0;

will become:

	ACQUIRE(pm_runtime_active_auto_try_enabled, pm)(dev);
	ret = ACQUIRE_ERR(pm_runtime_active_auto_try_enabled, &pm);
	if (ret < 0)
		return ret;
	.....
	return 0;

Note that the cases in which the return value of pm_runtime_get_sync()
is checked can also be handled with the help of the new guard macros.
For example, a piece of code like:

	ret = pm_runtime_get_sync(dev);
	if (ret < 0) {
		pm_runtime_put(dev);
		return ret;
	}
	.....
	pm_runtime_put(dev);
	return 0;

can be rewritten as:

	ACQUIRE(pm_runtime_active_auto_try_enabled, pm)(dev);
	ret = ACQUIRE_ERR(pm_runtime_active_auto_try_enabled, &pm);
	if (ret < 0)
		return ret;
	.....
	return 0;

or pm_runtime_get_active_try can be used if transparent handling of
disabled runtime PM is desirable.

Link: https://lore.kernel.org/linux-pm/878qimv24u.wl-tiwai@suse.de/ [1]
Link: https://lore.kernel.org/linux-pm/20250926150613.000073a4@huawei.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/2238241.irdbgypaU6@rafael.j.wysocki
[ rjw: Fixed leftovers from the previous version in the changelog ]
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-29 17:00:21 +02:00
Rafael J. Wysocki
c87072064b Merge branches 'acpi-apei', 'acpi-misc' and 'pnp'
Merge ACPI APEI updates, a miscellaneous update related to ACPI, and a
PNP update for 6.18-rc1:

 - Remove redundant assignments in erst_dbg_{ioctl|write}() in the ACPI
   APEI driver (Thorsten Blum)

 - Allow the ACPI APEI EINJ to handle more types of addresses than just
   MMIO (Jiaqi Yan)

 - Use str_low_high() helper in two places in the ACPI code (Chelsy
   Ratnawat)

 - Use str_plural() to simplify the PNP code (Xichao Zhao)

* acpi-apei:
  ACPI: APEI: EINJ: Allow more types of addresses except MMIO
  ACPI: APEI: Remove redundant assignments in erst_dbg_{ioctl|write}()

* acpi-misc:
  ACPI: Use str_low_high() helper in two places

* pnp:
  PNP: isapnp: use str_plural() to simplify the code
2025-09-29 15:28:51 +02:00
Rafael J. Wysocki
02e9542558 Merge branches 'acpi-thermal', 'acpi-fan', 'acpi-video', 'acpi-tad' and 'acpi-prm'
Merge an ACPI thermal zone driver update, an ACPI fan driver update, an
ACPI backlight (video) driver update, an ACPI TAD (time and alarm
device) driver update, and an ACPI PRM (platform runtime mechanism)
driver update for 6.18-rc1:

 - Eliminate a dummy local variable from the ACPI thermal driver (Rafael
   Wysocki)

 - Fold two simple functions into their only caller in the ACPI fan
   driver (Rafael Wysocki)

 - Force native backlight on Lenovo 82K8 in the ACPI backlight (video)
   driver (Mario Limonciello)

 - Add missing sysfs_remove_group() for ACPI_TAD_RT (Daniel Tang)

 - Skip PRM handlers with NULL handler_address or NULL VA in the ACPI
   PRM driver (Shang song)

* acpi-thermal:
  ACPI: thermal: Get rid of a dummy local variable

* acpi-fan:
  ACPI: fan: Fold two simple functions into their only caller

* acpi-video:
  ACPI: video: force native for Lenovo 82K8

* acpi-tad:
  ACPI: TAD: Add missing sysfs_remove_group() for ACPI_TAD_RT

* acpi-prm:
  ACPI: PRM: Skip handlers with NULL handler_address or NULL VA
2025-09-29 15:23:52 +02:00
Rafael J. Wysocki
6173176cf2 Merge branches 'acpi-property', 'acpi-resource', 'acpi-pm' and 'acpi-tables'
Merge updates of the ACPI device properties management code, ACPI
resources management code, ACPI power management, and ACPI data tables
parsing code for 6.18-rc1:

 - Fix ACPI buffer properties extraction for data-only subnodes
   represented as _DSD-equivalent packages (Rafael Wysocki)

 - Fix handling of ACPI data-only subnodes represented as _DSD-equivalent
   packages in the case when they are embedded in larger _DSD-equivalent
   packages and clean up acpi_nondev_subnode_extract() (Rafael Wysocki)

 - Skip ACPI IRQ override on ASUS Vivobook Pro N6506CU (Sam van Kampen)

 - Add power resource init function and use it for introducing an HP
   EliteBook 855 G7 WWAN modem power resource quirk (Maciej Szmigiero)

 - Add support for DBG2 RISC-V SBI port subtype and Precise Baud Rate
   field to the ACPI SPCR table parser (Chen Pei)

* acpi-property:
  ACPI: property: Adjust failure handling in acpi_nondev_subnode_extract()
  ACPI: property: Do not pass NULL handles to acpi_attach_data()
  ACPI: property: Add code comments explaining what is going on
  ACPI: property: Disregard references in data-only subnode lists
  ACPI: property: Fix buffer properties extraction for subnodes

* acpi-resource:
  ACPI: resource: Skip IRQ override on ASUS Vivobook Pro N6506CU

* acpi-pm:
  ACPI: PM: Add HP EliteBook 855 G7 WWAN modem power resource quirk
  ACPI: PM: Add power resource init function

* acpi-tables:
  ACPI: SPCR: Support Precise Baud Rate field
  ACPI: SPCR: Add support for DBG2 RISC-V SBI port subtype
2025-09-29 15:14:29 +02:00
Rafael J. Wysocki
be61a77818 Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-sysfs'
Merge an ACPI device enumeration update, ACPI processor driver updates,
and an ACPI sysfs-related code update for 6.18-rc1:

 - Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] so it is not
   regarded as real dependency (Hans de Goede)

 - Use ACPI_FREE() for freeing an ACPI object in description_show() in
   the ACPI sysfs-related code (Kaushlendra Kumar)

 - Fix memory leak in the ACPI processor idle driver registration error
   code path and optimize ACPI idle driver registration (Huisong Li,
   Rafael Wysocki)

 - Add module import namespace to the ACPI processor idle driver (Rafael
   Wysocki)

 - Eliminate static variable flat_state_cnt from the ACPI processor idle
   driver (Rafael Wysocki)

 - Release cpufreq policy references using __free() in the ACPI
   processor thremal driver (Zihuan Zhang)

 - Remove unused empty stubs of some functions and rearrange function
   declarations in a header file in the ACPI processor driver (Huisong
   Li)

 - Redefine two functions as void in the ACPI processor driver (Rafael
   Wysocki)

 - Do not expose global variable acpi_idle_driver in the ACPI processor
   driver (Huisong Li)

* acpi-scan:
  ACPI: scan: Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[]

* acpi-processor:
  ACPI: processor: Do not expose global variable acpi_idle_driver
  ACPI: processor: idle: Redefine two functions as void
  ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
  ACPI: processor: idle: Rearrange declarations in header file
  ACPI: processor: Remove unused empty stubs of some functions
  ACPI: processor: thermal: Release policy references using __free()
  ACPI: processor: idle: Fix function defined but not used warning
  ACPI: processor: idle: Eliminate static variable flat_state_cnt
  ACPI: processor: idle: Add module import namespace
  ACPI: processor: idle: Optimize ACPI idle driver registration
  ACPI: processor: idle: Fix memory leak when register cpuidle device failed

* acpi-sysfs:
  ACPI: sysfs: Use ACPI_FREE() for freeing an ACPI object
2025-09-29 15:12:52 +02:00
Rafael J. Wysocki
ab80f7707d Merge branch 'acpica'
Merge ACPICA updates (20250807 release material with a few fixes on top)
for 6.18-rc1:

 - Add SoundWire File Table (SWFT) signature to ACPICA (Maciej Strozek)

 - Rearrange local variable definition involving #ifdef in ACPICA to
   avoid using uninitialized variables (Zhe Qiao)

 - Allow ACPICA to skip Global Lock initialization (Huacai Chen)

 - Apply ACPI_NONSTRING in more places in ACPICA and fix two regressions
   related to incorrect ACPI_NONSTRING usage (Ahmed Salem)

 - Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
   Salem)

 - Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
   ACPICA (Hans de Goede)

 - Update dsmethod.c in ACPICA to address unused variable warning (Saket
   Dumbre)

 - Print error messages in ACPICA for too few or too many control method
   arguments (Saket Dumbre)

 - Update ACPICA version to 20250807 (Saket Dumbre)

 - Fix largest possible resource descriptor index in ACPICA (Dmitry
   Antipov)

 - Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
   (Davidlohr Bueso).

 - Add the package type to acceptable Arg3 types for _DSM in ACPICA
   because ACPI_TYPE_ANY does not cover it (Saket Dumbre)

 - Fix return values in ap_is_valid_checksum() in the acpidump utility
   in ACPICA (Kaushlendra Kumar)

* acpica:
  ACPICA: acpidump: fix return values in ap_is_valid_checksum()
  ACPICA: ACPI_TYPE_ANY does not include the package type
  ACPICA: CEDT: Add Back-Invalidate restriction to CXL Window
  ACPICA: Fix largest possible resource descriptor index
  ACPICA: Update version to 20250807
  ACPICA: Print error messages for too few or too many arguments
  ACPICA: Update dsmethod.c to get rid of unused variable warning
  ACPICA: dispatcher: Use acpi_ds_clear_operands() in acpi_ds_call_control_method()
  ACPICA: Debugger: drop ACPI_NONSTRING attribute from name_seg
  ACPICA: acpidump: drop ACPI_NONSTRING attribute from file_name
  ACPICA: iASL: Fix printing CDAT table header
  ACPICA: Apply ACPI_NONSTRING
  ACPICA: Allow to skip Global Lock initialization
  ACPICA: Change the compilation conditions
  ACPICA: Remove redundant "#ifdef" definitions
  ACPICA: Modify variable definition position
  ACPICA: Add SoundWire File Table (SWFT) signature
2025-09-29 15:10:54 +02:00
Thomas Zimmermann
1a4a527f9d drm/vmwgfx: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch
and buffer size. No alignment required.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Link: https://lore.kernel.org/r/20250821081918.79786-23-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
6fd37c99b8 drm/tegra: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch according to hardware requirements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20250821081918.79786-21-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
42abd3e9aa drm/rockchip: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 64.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250821081918.79786-20-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
115d1f3466 drm/renesas/rcar-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch according to hardware requirements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-18-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
9ea885b3a6 drm/omapdrm: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 8.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-16-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
7aff3a6be7 drm/nouveau: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 256.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250821081918.79786-15-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
538fa012cb drm/msm: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch
and buffer size. Alignment is specified in bytes, but the hardware
requires the scanline pitch to be a multiple of 32 pixels. Therefore
compute the byte size of 32 pixels in the given color mode and align
the pitch accordingly. This replaces the existing code in the driver's
align_pitch() helper.

v3:
- clarify pitch alignment in commit message (Dmitry)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20250821081918.79786-14-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
5d03809440 drm/loongson: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch according to hardware requirements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Cc: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20250821081918.79786-12-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
b1d0e470f8 drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. The hardware requires the framebuffer width to be a
multiple of 8. The scanline pitch has to be large enough to support
this. Therefore compute the byte size of 8 pixels in the given color
mode and align the pitch accordingly.

v5:
- fix typo in commit description

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20250821081918.79786-11-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
ecf29357b6 drm/exynos: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. No alignment required.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250821081918.79786-8-tzimmermann@suse.de
2025-09-29 14:00:57 +02:00
Thomas Zimmermann
4977dcecb9 drm/gem-shmem: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 8.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-5-tzimmermann@suse.de
2025-09-29 13:57:45 +02:00
Thomas Zimmermann
dcacfcd35c drm/gem-dma: Compute dumb-buffer sizes with drm_mode_size_dumb()
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 8.

Push the current calculation into the only direct caller imx. Imx's
hardware requires the framebuffer width to be aligned to 8. The
driver's current approach is actually incorrect, as it only guarantees
this implicitly and requires bpp to be a multiple of 8 already. A
later commit will fix this problem by aligning the scanline pitch
such that an aligned width still fits into each scanline's memory.

A number of other drivers are build on top of gem-dma helpers and
implement their own dumb-buffer allocation. These drivers invoke
drm_gem_dma_dumb_create_internal(), which is not affected by this
commit.

v5:
- avoid reset of arguments (Tomi)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-4-tzimmermann@suse.de
2025-09-29 13:57:44 +02:00
Thomas Zimmermann
fb24aaf541 drm/dumb-buffers: Provide helper to set pitch and size
Add drm_modes_size_dumb(), a helper to calculate the dumb-buffer
scanline pitch and allocation size. Implementations of struct
drm_driver.dumb_create can call the new helper for their size
computations.

There is currently quite a bit of code duplication among DRM's
memory managers. Each calculates scanline pitch and buffer size
from the given arguments, but the implementations are inconsistent
in how they treat alignment and format support. Later patches will
unify this code on top of drm_mode_size_dumb() as much as possible.

drm_mode_size_dumb() uses existing 4CC format helpers to interpret
the given color mode. This makes the dumb-buffer interface behave
similar the kernel's video= parameter. Current per-driver implementations
again likely have subtle differences or bugs in how they support color
modes.

The dumb-buffer UAPI is only specified for known color modes. These
values describe linear, single-plane RGB color formats or legacy index
formats. Other values should not be specified. But some user space
still does. So for unknown color modes, there are a number of known
exceptions for which drm_mode_size_dumb() calculates the pitch from
the bpp value, as before. All other values work the same but print
an error.

v6:
- document additional use cases for DUMB_CREATE2 in TODO list (Tomi)
- fix typos in documentation (Tomi)
v5:
- check for overflows with check_mul_overflow() (Tomi)
v4:
- use %u conversion specifier (Geert)
- list DRM_FORMAT_Dn in UAPI docs (Geert)
- avoid dmesg spamming with drm_warn_once() (Sima)
- add more information about bpp special case (Sima)
- clarify parameters for hardware alignment
- add a TODO item for DUMB_CREATE2
v3:
- document the UAPI semantics
- compute scanline pitch from for unknown color modes (Andy, Tomi)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-3-tzimmermann@suse.de
2025-09-29 13:57:43 +02:00
Thomas Zimmermann
5ae3838963 drm/dumb-buffers: Sanitize output on errors
The ioctls MODE_CREATE_DUMB and MODE_MAP_DUMB return results into a
memory buffer supplied by user space. On errors, it is possible that
intermediate values are being returned. The exact semantics depends
on the DRM driver's implementation of these ioctls. Although this is
most-likely not a security problem in practice, avoid any uncertainty
by clearing the memory to 0 on errors.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-2-tzimmermann@suse.de
2025-09-29 13:57:43 +02:00
Heiko Carstens
4335edb713 s390: Remove superfluous newlines from inline assemblies
Remove superfluous newlines from inline assemblies. Compilers use the
number of lines of inline assemblies as heuristic for the complexity
and inline decisions. Therefore inline assemblies should only contain
as many lines as required.

A lot of inline assemblies contain a superfluous newline for the last
line. Remove such newlines to improve compiler inlining decisions.

Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-29 13:52:08 +02:00
Heiko Carstens
f0edc8f113 s390/cio/ioasm: Fix __xsch() condition code handling
For the __xsch() inline assembly the conversion to flag output macros is
incomplete. Only the conditional shift of the return value was added, while
the required changes to the inline assembly itself are missing.

If compiled with GCC versions before 14.2 this leads to a double shift of
the cc output operand and therefore the returned value of __xsch() is
incorrectly always zero, instead of the expected condition code.

Fixes: e200565d43 ("s390/cio/ioasm: Convert to use flag output macros")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-29 13:52:08 +02:00
Heiko Carstens
fa7a0a53ee s390: Add -Wno-pointer-sign to KBUILD_CFLAGS_DECOMPRESSOR
If the decompressor is compiled with clang this can lead to the following
warning:

In file included from arch/s390/boot/startup.c:4:
...
In file included from ./include/linux/pgtable.h:6:
./arch/s390/include/asm/pgtable.h:2065:48: warning: passing 'unsigned long *' to parameter of type
      'long *' converts between pointers to integer types with different sign [-Wpointer-sign]
 2065 |                 value = __atomic64_or_barrier(PGSTE_PCL_BIT, ptr);

Add -Wno-pointer-sign to the decompressor compile flags, like it is also
done for the kernel. This is similar to what was done for x86 to address
the same problem [1].

[1] commit dca5203e3f ("x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS")

Cc: stable@vger.kernel.org
Reported-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-29 13:52:08 +02:00
Wang Haoran
27e06650a5 scsi: target: target_core_configfs: Add length check to avoid buffer overflow
A buffer overflow arises from the usage of snprintf to write into the
buffer "buf" in target_lu_gp_members_show function located in
/drivers/target/target_core_configfs.c. This buffer is allocated with
size LU_GROUP_NAME_BUF (256 bytes).

snprintf(...) formats multiple strings into buf with the HBA name
(hba->hba_group.cg_item), a slash character, a devicename (dev->
dev_group.cg_item) and a newline character, the total formatted string
length may exceed the buffer size of 256 bytes.

Since snprintf() returns the total number of bytes that would have been
written (the length of %s/%sn ), this value may exceed the buffer length
(256 bytes) passed to memcpy(), this will ultimately cause function
memcpy reporting a buffer overflow error.

An additional check of the return value of snprintf() can avoid this
buffer overflow.

Reported-by: Wang Haoran <haoranwangsec@gmail.com>
Reported-by: ziiiro <yuanmingbuaa@gmail.com>
Signed-off-by: Wang Haoran <haoranwangsec@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-09-29 07:49:12 -04:00
Thomas Zimmermann
817b201eaf drm/ast: Remove generic device initialization
The code in ast_main.c has been split into several helpers in
other source files. Delete the source file. With the generic
device init gone, fail probing on unknown hardware generations.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-13-tzimmermann@suse.de
2025-09-29 13:28:16 +02:00
Thomas Zimmermann
dba8ecc8a8 drm/ast: Move Gen7 device initialization into separate helper
Split off device initialization for Gen7 hardware into the helpers
ast_2600_device_create() and ast_2600_detect_wide_screen(). The new
functions are duplicates of their counterparts in ast_main.c, but
stripped from most non-Gen7 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-12-tzimmermann@suse.de
2025-09-29 13:28:16 +02:00
Thomas Zimmermann
7b6665147a drm/ast: Move Gen6 device initialization into separate helper
Split off device initialization for Gen6 hardware into the helpers
ast_2500_device_create() and ast_2500_detect_wide_screen(). The new
functions are duplicates of their counterparts in ast_main.c, but
stripped from most non-Gen6 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

v2:
- simplify widescreen-detection logic

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-11-tzimmermann@suse.de
2025-09-29 13:28:15 +02:00
Thomas Zimmermann
0125a7c3ae drm/ast: Move Gen5 device initialization into separate helper
Split off device initialization for Gen5 hardware into the helpers
ast_2400_device_create() and ast_2400_detect_wide_screen(). The new
functions are duplicates of their counterparts in ast_main.c, but
stripped from most non-Gen5 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

v2:
- simplify widescreen-detection logic

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-10-tzimmermann@suse.de
2025-09-29 13:28:14 +02:00
Thomas Zimmermann
f60a559a9e drm/ast: Move Gen4 device initialization into separate helper
Split off device initialization for Gen4 hardware into the helpers
ast_2300_device_create() and ast_2300_detect_wide_screen(). The new
functions are duplicates of their counterparts in ast_main.c, but
stripped from most non-Gen4 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

v2:
- simplify widescreen-detection logic

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-9-tzimmermann@suse.de
2025-09-29 13:28:13 +02:00
Thomas Zimmermann
6ee51e5c72 drm/ast: Move Gen3 device initialization into separate helper
Split off device initialization for Gen3 hardware into the helpers
ast_2200_device_create() and ast_2200_detect_wide_screen(). The new
functions are duplicates of their counterparts in ast_main.c, but
stripped from most non-Gen3 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

v2:
- simplify widescreen-detection logic

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-8-tzimmermann@suse.de
2025-09-29 13:28:12 +02:00
Thomas Zimmermann
095afdc533 drm/ast: Move Gen2 device initialization into separate helper
Split off device initialization for Gen2 hardware into the helpers
ast_2100_device_create() and ast_2100_detect_wide_screen(). The new
functions are duplicates of their counterparts in ast_main.c, but
stripped from most non-Gen2 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

v2:
- simplify widescreen-detection logic (Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-7-tzimmermann@suse.de
2025-09-29 13:28:11 +02:00
Thomas Zimmermann
4b233efd74 drm/ast: Move Gen1 device initialization into separate helper
Split off device initialization for Gen1 hardware into the helper
ast_2000_device_create(). The new function is a duplicate of their
counterpart in ast_main.c, but stripped from most non-Gen1 support.

Simplifies maintenance as the driver's number of supported hardware
generations grows.

v2:
- remove unnecessary widescreen-detection logic

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-6-tzimmermann@suse.de
2025-09-29 13:28:11 +02:00
Thomas Zimmermann
ff721b545b drm/ast: Prepare per-Gen device initialization
Switch device creation by hardware Gen. Return the value from the
call to ast_detect_chip(). All generations are still initialized
by ast_device_create().

Also add ast_device_init() for setting some common fields in struct
ast_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250922083708.45564-5-tzimmermann@suse.de
2025-09-29 13:28:10 +02:00