Commit graph

1,461,726 commits

Author SHA1 Message Date
Michael Walle
0f6eae86e6 dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
The Kontron SMARC-sAM67 module features an on-board house keeping uC.
It is designed to be compatible with the older sl28cpld implementation,
but has different sensors, like voltage and temperature monitoring. Add
a new compatible for that board.

Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250912120745.2295115-5-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-09-25 08:08:13 -07:00
Mohamad Kamal
31c092baea hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI
Add support for TUF GAMING X670E PLUS WIFI

Signed-off-by: Mohamad Kamal <mohamad.kamal.85@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250914084019.1108941-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-09-25 08:08:13 -07:00
Linus Torvalds
93a2744561 virtio,vhost: last minute fixes
More small fixes. Most notably this fixes crashes and hangs in
 vhost-net.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmjQcdAPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpXMAH/A2lEeCVLnz15Depf4OK0qbldynTA0epbtc0
 zdjDpyoMZ9qk7oeYl/vZhYQtBTjGXtzTcmHcIJucHA44vGTuRCDuR6tuUeatE6aS
 1NoqhtFc2kzes/gTwkMmnM5woogOfOzLyyiEktP3f/e22srHQfVxYmC5Xr+/NcHy
 3j4yeV9M9PKDuX9UDYHXA0x41z9pu5tkcDtLC9nJLiYuDllrQAs7CvIsqkCiVpG5
 IX2IoESl32egLzuJAtYguBTF+ckJNtg2+qOuXwXfmP/HdU+ygXq8u9iv21pG8897
 nkUwiKN9j9q4Csmhfw8ma3Y4tK7BoomYt4ndnAt1R7M+dkqherA=
 =0APL
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
 "virtio,vhost: last minute fixes

  More small fixes. Most notably this fixes crashes and hangs in
  vhost-net"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  MAINTAINERS, mailmap: Update address for Peter Hilber
  virtio_config: clarify output parameters
  uapi: vduse: fix typo in comment
  vhost: Take a reference on the task in struct vhost_task.
  vhost-net: flush batched before enabling notifications
  Revert "vhost/net: Defer TX queue re-enable until after sendmsg"
  vhost-net: unbreak busy polling
  vhost-scsi: fix argument order in tport allocation error message
2025-09-25 08:06:03 -07:00
Darrick J. Wong
cb40359470 fuse: move CREATE_TRACE_POINTS to a separate file
Before we start adding new tracepoints for fuse+iomap, move the
tracepoint creation itself to a separate source file so that we don't
have to start pulling iomap dependencies into dev.c just for the iomap
structures.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-09-25 16:22:18 +02:00
Darrick J. Wong
c4331e19a6 fuse: move the backing file idr and code into a new source file
iomap support for fuse is also going to want the ability to attach
backing files to a fuse filesystem.  Move the fuse_backing code into a
separate file so that both can use it.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-09-25 16:06:02 +02:00
Sergey Bashirov
db155b7c7c NFSD: Disallow layoutget during grace period
When the server is recovering from a reboot and is in a grace period,
any operation that may result in deletion or reallocation of block
extents should not be allowed. See RFC 8881, section 18.43.3.

If multiple clients write data to the same file, rebooting the server
during writing may result in file corruption. In the worst case, the
exported XFS may also become corrupted. Observed this behavior while
testing pNFS block volume setup.

Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-09-25 10:01:24 -04:00
John Hubbard
6d97171ac6 rust: pci: display symbolic PCI vendor names
The Display implementation for Vendor was forwarding directly to Debug
printing, resulting in raw hex values instead of PCI Vendor strings.

Improve things by doing a stringify!() call for each PCI Vendor item.
This now prints symbolic names such as "NVIDIA", instead of
"Vendor(0x10de)". It still falls back to Debug formatting for unknown
class values.

Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
[ Remove #[inline] for Vendor::fmt(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-09-25 15:52:00 +02:00
Marek Vasut
0a8f173d9d PCI: rcar-host: Drop PMSR spinlock
The pmsr_lock spinlock used to be necessary to synchronize access to the
PMSR register, because that access could have been triggered from either
config space access in rcar_pcie_config_access() or an exception handler
rcar_pcie_aarch32_abort_handler().

The rcar_pcie_aarch32_abort_handler() case is no longer applicable since
commit 6e36203bc1 ("PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read
which triggered an exception"), which performs more accurate, controlled
invocation of the exception, and a fixup.

This leaves rcar_pcie_config_access() as the only call site from which
rcar_pcie_wakeup() is called. The rcar_pcie_config_access() can only be
called from the controller struct pci_ops .read and .write callbacks,
and those are serialized in drivers/pci/access.c using raw spinlock
'pci_lock' . It should be noted that CONFIG_PCI_LOCKLESS_CONFIG is never
set on this platform.

Since the 'pci_lock' is a raw spinlock , and the 'pmsr_lock' is not a
raw spinlock, this constellation triggers 'BUG: Invalid wait context'
with CONFIG_PROVE_RAW_LOCK_NESTING=y .

Remove the pmsr_lock to fix the locking.

Fixes: a115b1bd3a ("PCI: rcar: Add L1 link state fix into data abort hook")
Reported-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250909162707.13927-1-marek.vasut+renesas@mailbox.org
2025-09-25 19:21:17 +05:30
John Hubbard
d53ea977ad rust: pci: display symbolic PCI class names
The Display implementation for Class was forwarding directly to Debug
printing, resulting in raw hex values instead of PCI Class strings.

Improve things by doing a stringify!() call for each PCI Class item.
This now prints symbolic names such as "DISPLAY_VGA", instead of
"Class(0x030000)". It still falls back to Debug formatting for unknown
class values.

Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-09-25 15:51:16 +02:00
Kevin Brodsky
200b0d2508 arm64: mm: Move KPTI helpers to mmu.c
create_kpti_ng_temp_pgd() is currently defined (as an alias) in
mmu.c without matching declaration in a header; instead cpufeature.c
makes its own declaration. This is clearly not pretty, and as commit
ceca927c86 ("arm64: mm: Fix CFI failure due to kpti_ng_pgd_alloc
function signature") showed, it also makes it very easy for the
prototypes to go out of sync.

All this would be much simpler if kpti_install_ng_mappings() and
associated functions lived in mmu.c, where they logically belong.
This is what this patch does:
- Move kpti_install_ng_mappings() and associated functions from
  cpufeature.c to mmu.c, add a declaration to <asm/mmu.h>
- Remove create_kpti_ng_temp_pgd() and just call
  __create_pgd_mapping_locked() directly instead
- Mark all these functions __init
- Move __initdata after kpti_ng_temp_alloc (as suggested by
  checkpatch)

Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
[will: Fix conflicts with init_idmap_kpti_bbml2_flag()]
Signed-off-by: Will Deacon <will@kernel.org>
2025-09-25 14:47:19 +01:00
Ankit Nautiyal
fe3c035330 drm/i915/dsb: Inline dsb_vblank_delay() into intel_dsb_wait_for_delayed_vblank()
Drop the now single-use dsb_vblank_delay() helper and inline its logic
directly into intel_dsb_wait_for_delayed_vblank().

This will help to keep all VRR related wait stuff in one place.

v2: Use intel_scanlines_to_usecs() in intel_dsb_wait_usec(). (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250925022352.3129859-1-ankit.k.nautiyal@intel.com
2025-09-25 18:38:21 +05:30
Ankit Nautiyal
68f1d1764d drm/i915/display: Drop intel_vrr_vblank_delay and use set_context_latency
The helper intel_vrr_vblank_delay() was used to keep track of the SCL
lines + the extra vblank delay required for ICL/TGL.
This was used to wait for sufficient lines for:
-push send bit to clear for VRR case
-evasion to delay the commit.

For first case we are using safe window scanline wait and with that we
just need to wait for SCL lines, we do not need to wait for the extra
vblank delay required for ICL/TGL. For the second case, we actually
do not need to wait for extra lines before the undelayed vblank, if we
are already in the safe window.

To sum up, SCL lines is sufficient for both cases.

So drop the helper intel_vrr_vblank_delay and just use
crtc_state->set_context_latency instead.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-10-ankit.k.nautiyal@intel.com
2025-09-25 18:38:20 +05:30
Ankit Nautiyal
5f9172bf6f drm/i915/vrr: Clamp guardband as per hardware and timing constraints
The maximum guardband value is constrained by two factors:
- The actual vblank length minus set context latency (SCL)
- The hardware register field width:
  - 8 bits for ICL/TGL (VRR_CTL_PIPELINE_FULL_MASK -> max 255)
  - 16 bits for ADL+ (XELPD_VRR_CTL_VRR_GUARDBAND_MASK -> max 65535)

Remove the #FIXME and clamp the guardband to the maximum allowed value.

v2:
- Use REG_FIELD_MAX(). (Ville)
- Separate out functions for intel_vrr_max_guardband(),
  intel_vrr_max_vblank_guardband(). (Ville)

v3:
- Fix Typo: Add the missing adjusted_mode->crtc_vdisplay in guardband
  computation. (Ville)
- Refactor intel_vrr_max_hw_guardband() and use else for consistency.
  (Ville)

v4:
- Drop max_guardband from intel_vrr_max_hw_guardband(). (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (#v2)
Link: https://lore.kernel.org/r/20250924141542.3122126-9-ankit.k.nautiyal@intel.com
2025-09-25 18:38:19 +05:30
Ankit Nautiyal
94da8e5eee drm/i915/reg_defs: Add REG_FIELD_MAX wrapper for FIELD_MAX()
Introduce REG_FIELD_MAX macro as local wrapper around FIELD_MAX() to return
the maximum value representable by a bit mask. The value is cast to u32
for consistency with other REG_* macros and assumes the bitfield fits
within 32 bits.

v2: Use __mask as macro argument aligning with other macros. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-8-ankit.k.nautiyal@intel.com
2025-09-25 18:38:19 +05:30
Ankit Nautiyal
4e5c033cfe drm/i915/display: Wait for scl start instead of dsb_wait_vblanks
Until LNL, intel_dsb_wait_vblanks() used to wait for the undelayed vblank
start. However, from PTL onwards, it waits for the start of the
safe-window defined by the number of lines programmed in the register
TRANS_SET_CONTEXT_LATENCY. This change was introduced to move the SCL
window out of the vblank region, supporting modes with higher refresh
rates and smaller vblanks. This change introduces a "safe window" a
scanline range from (undelayed vblank - SCL) to (delayed vblank - SCL).

As a result, on PTL+ platforms, the DSB wait for vblank completes exactly
SCL lines earlier than the undelayed vblank start (safe window start).
If the flip occurs in the active region and the push happens before the
vmin decision boundary, the DSB wait fires early, and the push is sent
inside this safe window. In such cases, the push bit is cleared at the
delayed vblank, but our wait logic does not account for the early trigger,
leading to DSB poll errors.

To fix this, we add an explicit wait for the end of the safe window i.e.,
the scanline range from (undelayed vblank - SCL) to (delayed vblank - SCL).
Once past this window, we are exactly SCL lines away from the delayed
vblank, and our existing wait logic works as intended.

This additional wait is only effective if the push occurs before the vmin
decision boundary. If the push happens after the boundary, the hardware
already guarantees we're SCL lines away from the delayed vblank, and the
extra wait becomes a no-op.

v2:
- Use helpers for safe window start/end. (Ville)
- Move the extra wait inside the helper to wait for delayed vblank. (Ville)
- Update the commit message.

v3:
- Add more documentation for explanation for the wait. (Ville)
- Rename intel_vrr_vmin_safe_window_start/end as this is vmin safe
  window. (Ville)
- Minor refactoring to align with the code. (Ville)
- Update the commit message for more clarity.

v4:
- Retain name for intel_vrr_safe_window_start as it doesn't change with
  vmin/vmax etc. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-7-ankit.k.nautiyal@intel.com
2025-09-25 18:38:18 +05:30
Ankit Nautiyal
2a3831cd80 drm/i915/dsb: s/intel_dsb_wait_vblank_delay/intel_dsb_wait_for_delayed_vblank
The helper intel_dsb_wait_vblank_delay() is used in DSB to wait for the
delayed vblank after the send push operation. Rename it to
intel_dsb_wait_for_delayed_vblank() to align with the semantics.

v2: Rename to intel_dsb_wait_vblank_delay instead of the proposed SCL
semantics, as this will be ot only about SCL lines with different timing
generator and different refresh rate modes. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-6-ankit.k.nautiyal@intel.com
2025-09-25 18:38:16 +05:30
Ankit Nautiyal
b811a7635a drm/i915/vrr: Use SCL for computing guardband
For now guardband is equal to the vblank length so ideally it should be
computed as difference between the vmin vtotal and vactive. However
since we are having few lines as SCL, we need to account for this while
computing the guardband.

Since the vblank start is moved by SCL lines from the vactive, the delta
between the vmin vtotal and new vblank start was used to account for this.
Now that SCL is explicitly tracked using the `set_context_latency` member,
use it directly in the guardband calculation.

In the future, when the guardband is shortened or optimized, we may need
to factor in both the change in the vblank start and SCL lines. For now,
explicitly accounting for SCL is sufficient.

v2: Fix typo: replace adjusted_mode->vdisplay with
adjusted_mode->crtc_vdisplay. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-5-ankit.k.nautiyal@intel.com
2025-09-25 18:38:16 +05:30
Ankit Nautiyal
6441d9038f drm/i915/vrr: Use set_context_latency instead of intel_vrr_real_vblank_delay()
The helper intel_vrr_real_vblank_delay() was added to account for the
SCL lines for TGL where we do not have the TRANS_SET_CONTEXT_LATENCY.

Now, since we already are tracking the SCL with new member
`set_context_latency` use it directly instead of the helper.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-4-ankit.k.nautiyal@intel.com
2025-09-25 18:38:15 +05:30
Ankit Nautiyal
419daf7d83 drm/i915/display: Add set_context_latency to crtc_state
'Set context latency' (SCL, Window W2) is defined as the number of lines
before the double buffering point, which are required to complete
programming of the registers, typically when DSB is used to program the
display registers.

Since we are not using this window for programming the registers, this
is mostly set to 0, unless there is a requirement for few cases related
to PSR/PR where the 'set context latency' should be at least 1.

Currently we are using the 'set context latency' (if required) implicitly
by moving the vblank start by the required amount and then measuring the
delay i.e. the difference between undelayed vblank start and delayed vblank
start.

Since our guardband matches the vblank length, this was not a problem as
the difference between the undelayed vblank and delayed vblank was at
the most equal to the 'set context latency' lines.

However, if we want to optimize the guardband, the difference between the
undelayed and the delayed vblank will be large and we cannot use this
difference as the 'set context latency' lines.

To make way for this optimization of guardband, formally introduce the
'set context latency' or SCL and track it as a new member
`set_context_latency` of the structure intel_crtc_state.

Eventually, all references of vblank delay where we mean to use set
context latency will be replaced by this new `set_context_latency`
member.

Note: for TGL the TRANS_SET_CONTEXT_LATENCY doesn't exist to account for
the SCL. However, the VBLANK_START-VACTIVE difference plays an identical
role here ie. it can be used to create the SCL window ahead of the
undelayed vblank.

While readback since there is no specific register to read out the SCL, use
the difference between vblank start and vactive to populate the new member
for TGL.

v2:
- Use u16 for set_context_latency. (Ville)
- s/vblank_delay/set_context_latency. (Ville)
- Meld the changes for TGL with this change. (Ville)

v3:
- Update comment to clarify the TGL case. (Ville)
- Fix typo in commit message.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-3-ankit.k.nautiyal@intel.com
2025-09-25 18:38:14 +05:30
Ankit Nautiyal
6131428a47 drm/i915/psr: s/intel_psr_min_vblank_delay/intel_psr_min_set_context_latency
Rename intel_psr_min_vblank_delay to intel_psr_min_set_context_latency
to reflect that it provides the minimum value for 'Set context
latency'(SCL or Window W2) for PSR/Panel Replay to work correctly across
different platforms.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250924141542.3122126-2-ankit.k.nautiyal@intel.com
2025-09-25 18:38:12 +05:30
Krishna Chaitanya Chundru
0da48c5b2f PCI: dwc: Support ECAM mechanism by enabling iATU 'CFG Shift Feature'
Designware databook r5.20a, sec 3.10.10.3 documents the 'CFG Shift Feature'
of the internal Address Translation Unit (iATU). When this feature is
enabled, it shifts/maps the BDF contained in the bits [27:12] of the target
address in MEM TLP to become BDF of the CFG TLP. This essentially
implements the Enhanced Configuration Address Mapping (ECAM) mechanism as
defined in PCIe r6.0, sec 7.2.2.

Currently, the driver is not making use of this CFG shift feature, thereby
creating the iATU outbound map for each config access to the devices,
causing latency and wasting CPU cycles.

So to avoid this, configure the controller to enable CFG shift feature by
enabling the 'CFG Shift' bit of the 'iATU Control 2 Register'.

As a result of enabling CFG shift (ECAM), there is no longer a need to map
the DBI register space separately as the DBI region falls under the
'config' space used for ECAM (as DBI is used to access the Root Port).

For enabling ECAM using CFG shift, the platform has to satisfy following
requirements:

  1. Size of the 'config' memory space to be used as ECAM memory should be
     able to accommodate the number of buses defined in the 'bus-range'
     property of the host bridge DT node.

  2. The 'config' memory space should be 256 MiB aligned. This requirement
     comes from PCIe r6.0, sec 7.2.2, which says the base address of ECAM
     memory should be aligned to a 2^(n+20) byte address boundary. For the
     DWC cores, n is 8, so this results in 2^28 byte alignment requirement.

It should be noted that some DWC vendor glue drivers like pcie-al may use
their own ECAM mechanism. For those controllers, set
'dw_pcie_rp::native_ecam' flag and skip enabling the CFG Shift feature in
the DWC core.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: code split, reworded subject/description, comment, native_ecam flag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250923-controller-dwc-ecam-v10-4-e84390ba75fa@kernel.org
2025-09-25 18:34:01 +05:30
Krishna Chaitanya Chundru
4660e50cf8 PCI: qcom: Prepare for the DWC ECAM enablement
To support the DWC ECAM mechanism, prepare the driver by performing below
configurations:

  1. Since the ELBI region will be covered by the ECAM 'config' space,
     override the 'elbi_base' with the address derived from 'dbi_base' and
     the offset from PARF_SLV_DBI_ELBI register.

  2. Block the transactions from the host bridge to devices other than Root
     Port on the root bus to return all F's. This is required when the 'CFG
     Shift Feature' of iATU is enabled.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: code split, reworded subject/description and comments]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250923-controller-dwc-ecam-v10-3-e84390ba75fa@kernel.org
2025-09-25 18:33:56 +05:30
Krishna Chaitanya Chundru
f6fd357f7a PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'
In order to enable PCIe ECAM mechanism in DWC driver as per the 'CFG Shift
Feature' documented in Designware databook r5.20a, sec 3.10.10.3, prepare
the driver to handle the one time iATU setup and creating ECAM window.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: splitted the preparatory code into a separate commit for bisectability]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250923-controller-dwc-ecam-v10-2-e84390ba75fa@kernel.org
2025-09-25 18:33:52 +05:30
Krishna Chaitanya Chundru
c96992a24b PCI: dwc: Add support for ELBI resource mapping
External Local Bus Interface (ELBI) is an optional register space for all
DWC IPs containing the vendor specific registers. There is no need for the
vendor glue drivers to fetch and map the ELBI region separately.

Hence, optionally fetch and map the resource from DT in the DWC core. This
also warrants dropping the corresponding code from glue drivers. Hence,
drop the ELBI resource fetch and map logic from glue drivers and convert
them to use 'dw_pci::elbi_base'.

Note that the pcie-qcom-ep driver used devm_pci_remap_cfg_resource() to map
the ELBI resource previously. But it was a mistake since
devm_pci_remap_cfg_resource() should only be used for mapping the PCIe
config space region as it maps the region as Non-Posted. As ELBI is used to
hold vendor specific registers, there is no need to map the region as
Non-Posted. With this conversion, the region will get mapped as normal MMIO
memory.

Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: removed elbi override, converted glue drivers and reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250923-controller-dwc-ecam-v10-1-e84390ba75fa@kernel.org
2025-09-25 18:33:37 +05:30
Feng Yang
fd2f74f8f3 tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64
When using bpf_program__attach_kprobe_multi_opts on ARM64 to hook a BPF program
that contains the bpf_get_stackid function, the BPF program fails
to obtain the stack trace and returns -EFAULT.

This is because ftrace_partial_regs omits the configuration of the pstate register,
leaving pstate at the default value of 0. When get_perf_callchain executes,
it uses user_mode(regs) to determine whether it is in kernel mode.
This leads to a misjudgment that the code is in user mode,
so perf_callchain_kernel is not executed and the function returns directly.
As a result, trace->nr becomes 0, and finally -EFAULT is returned.

Therefore, the assignment of the pstate register is added here.

Fixes: b9b55c8912 ("tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs")
Closes: https://lore.kernel.org/bpf/20250919071902.554223-1-yangfeng59949@163.com/
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2025-09-25 13:59:26 +01:00
Yang Shi
195a1b7d83 arm64: kprobes: call set_memory_rox() for kprobe page
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.

Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2025-09-25 13:56:48 +01:00
Greg Kroah-Hartman
c584a1c7c8 USB: disable rust bindings from the build for now
The rust USB bindings as submitted are a good start, but they don't
really seem to be correct in a number of minor places, so just disable
them from the build entirely at this point in time.  When they are ready
to be re-enabled, this commit can be reverted.

Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-25 14:53:47 +02:00
Yicong Yang
a084c3c4a2 drivers/perf: hisi: Add tt_core_deprecated for compatibility
Previously tt_core is defined as config1:0-7 which may not cover all
the CPUs sharing L3C on platforms with more than 8 CPUs in a L3C. In
order to support such platforms extend tt_core to 16 bits, since no
spare space in config1, tt_core was moved to config2:0-15.

Though linux expects the users to retrieve the control encoding from
sysfs first for each option, it's possible if user doesn't follow
this and hardcoded tt_core in config1. So add an option
tt_core_deprecated for config1:0-7 for backward compatibility.

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
2025-09-25 13:51:59 +01:00
Heiko Carstens
088bb10e37 s390/mm: Add memory allocation profiling hooks
Similar to common code changes [1] add alloc_hook() wrappers to page table
allocation functions to allow for memory allocation profiling.

If CONFIG_MEM_ALLOC_PROFILING is enabled call sites of page table
allocations are accounted, instead of e.g. only crst_table_alloc() and
page_table_alloc(). This allows for slightly better profiling data, and the
output of /proc/allocinfo is similar to other architectures.

Without alloc_hook() wrappers the output of /proc/allocinfo looks like
this:

    17096704     4174 mm/memory.c:1061 func:folio_prealloc
    17809408     4348 mm/memory.c:1063 func:folio_prealloc
           0        0 mm/memory.c:4422 func:alloc_swap_folio
           0        0 mm/memory.c:4286 func:__alloc_swap_folio
           0        0 mm/memory.c:4971 func:alloc_anon_folio
         ...
     1589248       97 arch/s390/mm/pgalloc.c:25 func:crst_table_alloc
           0        0 arch/s390/mm/pgalloc.c:124 func:page_table_alloc_pgste
     4280320     1045 arch/s390/mm/pgalloc.c:149 func:page_table_alloc

With alloc_hook() wrappers:

     1097728      268 mm/memory.c:5147 func:__do_fault
    20119552     4912 mm/memory.c:1061 func:folio_prealloc
    17534976     4281 mm/memory.c:1063 func:folio_prealloc
           0        0 mm/memory.c:4422 func:alloc_swap_folio
           0        0 mm/memory.c:4286 func:__alloc_swap_folio
      786432      192 mm/memory.c:452 func:__pte_alloc
      405504       99 mm/memory.c:464 func:__pte_alloc_kernel
     1880064      459 mm/memory.c:5525 func:do_fault_around
           0        0 mm/memory.c:6403 func:__p4d_alloc
           0        0 mm/memory.c:6426 func:__pud_alloc
     1064960       65 mm/memory.c:6450 func:__pmd_alloc
           0        0 mm/memory.c:4971 func:alloc_anon_folio
           0        0 mm/memory.c:5233 func:do_set_pmd

[1] commit 2c321f3f70 ("mm: change inlined allocation helpers to account at the call site")

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-25 14:28:58 +02:00
Marco Crivellari
72105fc1c1 s390: Replace use of system_wq with system_dfl_wq
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistentcy cannot be addressed without refactoring the API.

system_wq is a per-CPU worqueue (replaced by system_percpu_wq), but the
current code does not benefit from it. Because of that, system_wq has been
replaced by system_dfl_wq, the new unbound workqueue.

The old wq will be kept for a few release cylces.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-25 14:28:58 +02:00
Marco Crivellari
dbfe205a34 s390/diag324: Replace use of system_wq with system_percpu_wq
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistentcy cannot be addressed without refactoring the API.

system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make
it clear by renaming system_wq to system_percpu_wq.

queue_work() / queue_delayed_work() mod_delayed_work() will now use the
new per-cpu wq.

The old wq will be kept for a few release cylces.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-25 14:28:58 +02:00
Marco Crivellari
f707d2f7a0 s390/tape: Add WQ_PERCPU to alloc_workqueue users
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.

alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.

This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.

This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.

Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.

With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.

All existing users have been updated accordingly.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-09-25 14:28:58 +02:00
Harrison Carter
64826db1e2 dt-bindings: leds: as3645: Convert to DT schema
Convert the ams,as3645a.txt to DT Schema format.

Signed-off-by: Harrison Carter <hcarter@thegoodpenguin.co.uk>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
2025-09-25 13:01:32 +01:00
Lukas Bulwahn
017bdcdb3a MAINTAINERS: Adjust file entry in LOONGSON SECURITY ENGINE DRIVERS
Commit 5c83b07df9 ("tpm: Add a driver for Loongson TPM device") adds a
driver at drivers/char/tpm/tpm_loongson.c, and commit 74fddd5fba
("MAINTAINERS: Add entry for Loongson Security Engine drivers") adds a new
section LOONGSON SECURITY ENGINE DRIVERS intending to refer to that driver.
It however adds the entry drivers/char/tpm_loongson.c; note that it misses
the tpm subdirectory.

Adjust the entry to refer to the intended file.

Fixes: 74fddd5fba ("MAINTAINERS: Add entry for Loongson Security Engine drivers")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
2025-09-25 12:59:30 +01:00
Nathan Chancellor
a727bc0588 tpm: loongson: Add bufsiz parameter to tpm_loongson_send()
Commit 5c83b07df9 ("tpm: Add a driver for Loongson TPM device") has a
semantic conflict with commit 07d8004d6f ("tpm: add bufsiz parameter
in the .send callback"), as the former change was developed against a
tree without the latter change. This results in a build error:

  drivers/char/tpm/tpm_loongson.c:48:17: error: initialization of 'int (*)(struct tpm_chip *, u8 *, size_t,  size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int,  long unsigned int)'} from incompatible pointer type 'int (*)(struct tpm_chip *, u8 *, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int)'} [-Wincompatible-pointer-types]
     48 |         .send = tpm_loongson_send,
        |                 ^~~~~~~~~~~~~~~~~
  drivers/char/tpm/tpm_loongson.c:48:17: note: (near initialization for 'tpm_loongson_ops.send')
  drivers/char/tpm/tpm_loongson.c:31:12: note: 'tpm_loongson_send' declared here
     31 | static int tpm_loongson_send(struct tpm_chip *chip, u8 *buf, size_t count)
        |            ^~~~~~~~~~~~~~~~~

Add the expected bufsiz parameter to tpm_loongson_send() to resolve the
error.

Fixes: 5c83b07df9 ("tpm: Add a driver for Loongson TPM device")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
2025-09-25 12:45:03 +01:00
Masahiro Yamada
37fac070eb
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
CONFIG_EFI_DEBUG embeds absolute file paths into object files, which
makes the resulting vmlinux specific to the build environment.

Add a note about this in reproducible-builds.rst

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20250924-kbuild-doc-config-debug-efi-in-reproducible-builds-v2-1-d2d6b9dcdb7d@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
2025-09-25 04:41:48 -07:00
Magnus Karlsson
dd948aa63e MAINTAINERS: Delete inactive maintainers from AF_XDP
Delete Björn Töpel and Jonathan Lemon as maintainer and reviewer,
respectively, as they have not been contributing towards AF_XDP for
several years. I have spoken to Björn and he is ok with his removal.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20250915120148.2922-1-magnus.karlsson@gmail.com
2025-09-25 13:18:22 +02:00
Paolo Abeni
12de5f0f6c Merge branch 'net-gso-restore-outer-ip-ids-correctly'
Richard Gobert says:

====================
net: gso: restore outer ip ids correctly

GRO currently ignores outer IPv4 header IDs for encapsulated packets
that have their don't-fragment flag set. GSO, however, always assumes
that outer IP IDs are incrementing. This results in GSO mangling the
outer IDs when they aren't incrementing. For example, GSO mangles the
outer IDs of IPv6 packets that were converted to IPv4, which must
have an ID of 0 according to RFC 6145, sect. 5.1.

GRO+GSO is supposed to be entirely transparent by default. GSO already
correctly restores inner IDs and IDs of non-encapsulated packets. The
tx-tcp-mangleid-segmentation feature can be enabled to allow the
mangling of such IDs so that TSO can be used.

This series fixes outer ID restoration for encapsulated packets when
tx-tcp-mangleid-segmentation is disabled. It also allows GRO to merge
packets with fixed IDs that don't have their don't-fragment flag set.

v1: https://lore.kernel.org/netdev/20250814114030.7683-1-richardbgobert@gmail.com/
v2: https://lore.kernel.org/netdev/20250819063223.5239-1-richardbgobert@gmail.com/
v3: https://lore.kernel.org/netdev/20250821073047.2091-1-richardbgobert@gmail.com/
v4: https://lore.kernel.org/netdev/20250901113826.6508-1-richardbgobert@gmail.com/
v5: https://lore.kernel.org/netdev/20250915113933.3293-1-richardbgobert@gmail.com/
v6: https://lore.kernel.org/netdev/20250916144841.4884-1-richardbgobert@gmail.com/
v7: https://lore.kernel.org/netdev/20250922084103.4764-1-richardbgobert@gmail.com/
====================

Link: https://patch.msgid.link/20250923085908.4687-1-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 12:42:52 +02:00
Richard Gobert
5e9ff9378a selftests/net: test ipip packets in gro.sh
Add IPIP test-cases to the GRO selftest.

This selftest already contains IP ID test-cases. They are now
also tested for encapsulated packets.

This commit also fixes ipip packet generation in the test.

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-6-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 12:42:49 +02:00
Richard Gobert
f095a358fa net: gro: remove unnecessary df checks
Currently, packets with fixed IDs will be merged only if their
don't-fragment bit is set. This restriction is unnecessary since
packets without the don't-fragment bit will be forwarded as-is even
if they were merged together. The merged packets will be segmented
into their original forms before being forwarded, either by GSO or
by TSO. The IDs will also remain identical unless NETIF_F_TSO_MANGLEID
is set, in which case the IDs can become incrementing, which is also fine.

Clean up the code by removing the unnecessary don't-fragment checks.

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-5-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 12:42:49 +02:00
Richard Gobert
3271f19bf7 net: gso: restore ids of outer ip headers correctly
Currently, NETIF_F_TSO_MANGLEID indicates that the inner-most ID can
be mangled. Outer IDs can always be mangled.

Make GSO preserve outer IDs by default, with NETIF_F_TSO_MANGLEID allowing
both inner and outer IDs to be mangled.

This commit also modifies a few drivers that use SKB_GSO_FIXEDID directly.

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-4-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 12:42:49 +02:00
Richard Gobert
21f7484220 net: gro: only merge packets with incrementing or fixed outer ids
Only merge encapsulated packets if their outer IDs are either
incrementing or fixed, just like for inner IDs and IDs of non-encapsulated
packets.

Add another ip_fixedid bit for a total of two bits: one for outer IDs (and
for unencapsulated packets) and one for inner IDs.

This commit preserves the current behavior of GSO where only the IDs of the
inner-most headers are restored correctly.

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-3-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 12:42:49 +02:00
Richard Gobert
25c550464a net: gro: remove is_ipv6 from napi_gro_cb
Remove is_ipv6 from napi_gro_cb and use sk->sk_family instead.
This frees up space for another ip_fixedid bit that will be added
in the next commit.

udp_sock_create always creates either a AF_INET or a AF_INET6 socket,
so using sk->sk_family is reliable. In IPv6-FOU, cfg->ipv6_v6only is
always enabled.

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-2-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 12:42:49 +02:00
Mohsin Bashir
bb6a22651b eth: fbnic: Read module EEPROM
Add support to read module EEPROM for fbnic. Towards this, add required
support to issue a new command to the firmware and to receive the response
to the corresponding command.

Create a local copy of the data in the completion struct before writing to
ethtool_module_eeprom to avoid writing to data in case it is freed. Given
that EEPROM pages are small, the overhead of additional copy is
negligible.

Do not block API with explicit checks since API has appropriate checks in
place for length, offset, and page.

Explicitly check bank, page, offset, and length in
fbnic_fw_parse_qsfp_read_resp() to match EEPROM read responses to the
correct request. This is important because if the driver times out waiting
for an EEPROM read response, a subsequent read request with different
values is susceptible to receiving an erroneous response (i.e., the
response to the previous request).

Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250922231855.3717483-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 11:58:49 +02:00
Daniel Lee
3ed17349f1
platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()
When WMAB is called to set the fan mode, the new mode is read from either
bits 0-1 or bits 4-5 (depending on the value of some other EC register).
Thus when WMAB is called with bits 4-5 zeroed and called again with
bits 0-1 zeroed, the second call undoes the effect of the first call.
This causes writes to /sys/devices/platform/lg-laptop/fan_mode to have
no effect (and causes reads to always report a status of zero).

Fix this by calling WMAB once, with the mode set in bits 0,1 and 4,5.
When the fan mode is returned from WMAB it always has this form, so
there is no need to preserve the other bits.  As a bonus, the driver
now supports the "Performance" fan mode seen in the LG-provided Windows
control app, which provides less aggressive CPU throttling but louder
fan noise and shorter battery life.

Also, correct the documentation to reflect that 0 corresponds to the
default mode (what the Windows app calls "Optimal") and 1 corresponds
to the silent mode.

Fixes: dbf0c5a6b1 ("platform/x86: Add LG Gram laptop special features driver")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204913#c4
Signed-off-by: Daniel Lee <dany97@live.ca>
Link: https://patch.msgid.link/MN2PR06MB55989CB10E91C8DA00EE868DDC1CA@MN2PR06MB5598.namprd06.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-09-25 12:21:43 +03:00
Dan Carpenter
d9c70e93ec octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line.  Two lines later, we take
a mutex so I don't think this is an RCU safe region.  Re-order it to do
the dereferences before queuing up the free.

Fixes: 68fbff68db ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/aNKCL1jKwK8GRJHh@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 11:04:34 +02:00
Adrián Larumbe
7d9c3442b0 drm/panthor: Defer scheduler entitiy destruction to queue release
Commit de85488138 ("drm/panthor: Add the scheduler logical block")
handled destruction of a group's queues' drm scheduler entities early
into the group destruction procedure.

However, that races with the group submit ioctl, because by the time
entities are destroyed (through the group destroy ioctl), the submission
procedure might've already obtained a group handle, and therefore the
ability to push jobs into entities. This is met with a DRM error message
within the drm scheduler core as a situation that should never occur.

Fix by deferring drm scheduler entity destruction to queue release time.

Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250919164436.531930-1-adrian.larumbe@collabora.com
2025-09-25 09:52:03 +01:00
Jani Nikula
c2e04017fb drm/i915/gem: add i915_gem_fence_wait_priority_display() helper
Add i915_gem_fence_wait_priority_display() helper to wait with
I915_PRIORITY_DISPLAY. This drops the intel_plane.c dependency on
i915_scheduler_types.h, and allows us to remove the compat header from
xe.

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250924085129.146173-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-09-25 11:41:59 +03:00
Paolo Abeni
764a47a639 Merge branch 'lantiq_gswip-fixes'
Vladimir Oltean says:

====================
lantiq_gswip fixes

This is a small set of fixes which I believe should be backported for
the lantiq_gswip driver. Daniel Golle asked me to submit them here:
https://lore.kernel.org/netdev/aLiDfrXUbw1O5Vdi@pidgin.makrotopia.org/

As mentioned there, a merge conflict with net-next is expected, due to
the movement of the driver to the 'drivers/net/dsa/lantiq' folder there.
Good luck :-/

Patch 2/2 fixes an old regression and is the minimal fix for that, as
discussed here:
https://lore.kernel.org/netdev/aJfNMLNoi1VOsPrN@pidgin.makrotopia.org/

Patch 1/2 was identified by me through static analysis, and I consider
it to be a serious deficiency. It needs a test tag.
====================

Link: https://patch.msgid.link/20250918072142.894692-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 10:29:22 +02:00
Vladimir Oltean
987afe1479 net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port
The blamed commit and others in that patch set started the trend
of reusing existing DSA driver API for a new purpose: calling
ds->ops->port_fdb_add() on the CPU port.

The lantiq_gswip driver was not prepared to handle that, as can be seen
from the many errors that Daniel presents in the logs:

[  174.050000] gswip 1e108000.switch: port 2 failed to add fa:aa:72:f4:8b:1e vid 1 to fdb: -22
[  174.060000] gswip 1e108000.switch lan2: entered promiscuous mode
[  174.070000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[  174.090000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[  174.090000] gswip 1e108000.switch: port 2 failed to delete fa:aa:72:f4:8b:1e vid 1 from fdb: -2

The errors are because gswip_port_fdb() wants to get a handle to the
bridge that originated these FDB events, to associate it with a FID.
Absolutely honourable purpose, however this only works for user ports.

To get the bridge that generated an FDB entry for the CPU port, one
would need to look at the db.bridge.dev argument. But this was
introduced in commit c26933639b ("net: dsa: request drivers to perform
FDB isolation"), first appeared in v5.18, and when the blamed commit was
introduced in v5.14, no such API existed.

So the core DSA feature was introduced way too soon for lantiq_gswip.
Not acting on these host FDB entries and suppressing any errors has no
other negative effect, and practically returns us to not supporting the
host filtering feature at all - peacefully, this time.

Fixes: 10fae4ac89 ("net: dsa: include bridge addresses which are local in the host fdb list")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Closes: https://lore.kernel.org/netdev/aJfNMLNoi1VOsPrN@pidgin.makrotopia.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250918072142.894692-3-vladimir.oltean@nxp.com
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-25 10:29:18 +02:00