[Why]
There is a `scale` sysfs attribute that can be used to indicate when
non-linear brightness scaling is in use. As Custom brightness curves
work by linear interpolation of points the scale is no longer linear.
[How]
Indicate non-linear scaling when custom brightness curves in use and
linear scaling otherwise.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
control flag for the wait during pipe update wait for vupdate should
be set if update type is not fast or med to prevent an invalid sleep
operation
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add the link index in DP AUX transfer and DPMS functions.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DM should be able to control HDCP retry limit via configurable
parameter.
[How]
Expose a retry_limit parameter for controlling the maximum number of
retries and lift the hardcode out to DM.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch VBIOS build number from atom rom image. Add a sysfs interface to
read the build number.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement caching separately for SystemMetrics table from PMFW. The same
table could be used for multiple interfaces. Hence, cache it internally
to avoid multiple queries to the firmware. For SystemMetrics table, 5ms
cache interval is sufficient.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Returns different error codes based on the scenario to help the user app understand
the AMDGPU device status when an exception occurs.
v2:
change -NODEV to -EBUSY.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use int instead of uint32_t for 'ret' variable to store negative error
codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '==' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '!=' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false" or
"a ? false : true", if 'a' itself returns a boolean result, the ternary
operator can be omitted. Remove redundant ternary operators to clean up the
code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a detect and reset callback and add the implementation
for mes. The callback will detect all hung queues of a
particular ip type (e.g., GFX or compute or SDMA) and
reset them.
v2: increase reset counter and set fence force completion
v3: Removed userq_mutex in mes_userq_detect_and_reset since the driver holds it when calling
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use negative error code -EINVAL instead of positive EINVAL in the default
case of svm_ioctl() to conform to Linux kernel error code conventions.
Fixes: 42de677f79 ("drm/amdkfd: register svm range")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some SOCs which are part of the cyan skillfish family
rely on an explicit firmware for IP discovery. Add support
for the gpu_info firmware.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align the function headers for `amdgpu_max_hdmi_pixel_clock` and
`amdgpu_connector_dvi_mode_valid` with the function implementations so
they match the expected kdoc style.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns the maximum supported HDMI (TMDS) pixel clock in KHz.
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Validates the given display mode on DVI and HDMI connectors.
Fixes: 585b2f685c ("drm/amdgpu: Respect max pixel clock for HDMI and DVI-D (v2)")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current mem limit check leaks some GTT memory (reserved_for_pt
reserved_for_ras + adev->vram_pin_size) for small APUs.
Since carveout VRAM is tunable on APUs, there are three case
regarding the carveout VRAM size relative to GTT:
1. 0 < carveout < gtt
apu_prefer_gtt = true, is_app_apu = false
2. carveout > gtt / 2
apu_prefer_gtt = false, is_app_apu = false
3. 0 = carveout
apu_prefer_gtt = true, is_app_apu = true
It doesn't make sense to check below limitation in case 1
(default case, small carveout) because the values in the below
expression are mixed with carveout and gtt.
adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt - reserved_for_ras -
atomic64_read(&adev->vram_pin_size)
gtt: kfd.vram_used, vram_needed, vram_size
carveout: reserved_for_pt, reserved_for_ras, adev->vram_pin_size
In case 1, vram allocation will go to gtt domain, skip vram check
since ttm_mem_limit check already cover this allocation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
Fixes: 3d5470c973 ("drm/amd/display/dm: add support for OEM i2c bus")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for forcing completion of userq fences.
This is needed for userq resets and asic resets so that we
can set the error on the fence and force completion.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track resets from user queues.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement support for the hung queue detect and reset
functionality.
v2: Always use AMDGPU_MES_SCHED_PIPE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement support for the hung queue detect and reset
functionality.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helper function to detect and reset hung queues. MES will
return an array of doorbell indices of which queues are hung
and were optionally reset.
v2: Clear the doorbell array before detection
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit implements the actual MES (Micro Engine Scheduler) suspend
and resume gang operations for version 12 hardware. Previously these
functions were just stubs returning success.
v2: Always use AMDGPU_MES_SCHED_PIPE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
The dtbs_check validation for am335x-cm-t335.dtb flags an error
for an unevaluated 'num-serializer' property in the mcasp0 node.
This property is obsolete; it is not defined in the davinci-mcasp-audio
schema and is not used by the corresponding (or any) driver.
Remove this unused property to fix the schema validation warning.
Fixes: 48ab364478 ("ARM: dts: cm-t335: add audio support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add two new function pointers to struct amdgpu_userq_funcs:
- preempt: To handle preemption of user mode queues
- restore: To restore preempted user mode queues
These callbacks will allow the driver to properly manage queue
preemption and restoration when needed, such as during context
switching or priority changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.
Fixes: ed05637c30 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
We did not propagate the __user attribute of the pointers in
__get_kernel_nofault() and __put_kernel_nofault(), which results in
sparse complaining:
>> mm/maccess.c:41:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void const [noderef] __user *from @@ got unsigned long long [usertype] * @@
mm/maccess.c:41:17: sparse: expected void const [noderef] __user *from
mm/maccess.c:41:17: sparse: got unsigned long long [usertype] *
So fix this by correctly casting those pointers.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508161713.RWu30Lv1-lkp@intel.com/
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: f6bff7827a ("riscv: uaccess: use 'asm_goto_output' for get_user()")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Link: https://lore.kernel.org/r/20250903-dev-alex-sparse_warnings_v1-v1-2-7e6350beb700@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree
schema, was incorrectly assigned a value (<1>) in the DTS file, causing
a validation error: "size (4) error for type flag". The driver uses
of_property_read_bool(), expecting a boolean. Remove the value to fix
the dtbs_check error.
Fixes: 262178b6b8 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The kexec_buf structure was previously declared without initialization.
commit bf454ec31a ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Fixes: bf454ec31a ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250827-kbuf_all-v1-2-1df9882bb01a@debian.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: be97d0db5f ("riscv: VMAP_STACK overflow detection thread-safe")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250725165410.2896641-5-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
emit_ld is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 2ddec2c80b ("riscv, bpf: inline bpf_get_smp_processor_id()")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20250812090256.757273-4-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
emit_ld is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 19c56d4e5b ("riscv, bpf: add internal-only MOV instruction to resolve per-CPU addrs")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250812090256.757273-3-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The type of the value to write should be determined by the size of the
destination, not by the value itself, which may be a constant. This
aligns the behavior with x86_64, where __typeof__(*(__gu_ptr)) is used
to infer the correct type.
This fixes an issue in put_cmsg, which was only writing 4 out of 8
bytes to the cmsg_len field, causing the glibc tst-socket-timestamp test
to fail.
Fixes: ca1a66cdd6 ("riscv: uaccess: do not do misaligned accesses in get/put_user()")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250724220853.1969954-1-aurelien@aurel32.net
Signed-off-by: Paul Walmsley <pjw@kernel.org>
REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 503638e0ba ("riscv: Stop emitting preventive sfence.vma for new vmalloc mappings")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250725165410.2896641-4-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Simplify error handling in OMAP powerdomain, voltage, and VP code by
replacing open-coded '!ptr || IS_ERR(ptr)' checks with the combined
IS_ERR_OR_NULL() helper.
This improves readability and consistency across
omap_set_pwrdm_state(), voltdm_get_voltage(), voltdm_scale(),
voltdm_reset(), and related functions.
No functional change intended.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250817083449.2249268-1-yangxiuwei2025@163.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaLsNQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU2SAQCTyMtS
9Nryoq5XAzzWc+exbXrhmCQmx7vovM+G0VXRWwD/eyj76Y4OTioBbCpSOpkiTmu8
O2MxuKmUIyjbNm/gSBE=
=rEsa
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sr: Reinstate rotational media flag
scsi: lpfc: Fix buffer free/clear order in deferred receive path
Fixes the following dtschema check warning:
serial@0 (ti,am3352-uart): compatible: 'oneOf' conditional failed, one must be fixed:
['ti,am3352-uart', 'ti,omap3-uart'] is too long
'ti,am3352-uart' is not one of ['ti,am64-uart', 'ti,j721e-uart']
'ti,am654-uart' was expected
from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250721173741.6369-1-bruno.thomsen@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>