Some platforms have incorrect T_POWER_ON value programmed in hardware.
Generally these will be corrected by bootloaders, but not all targets
support bootloaders to program correct values. That means the
LTR_L1.2_THRESHOLD value calculated by aspm.c can be wrong, which can
result in improper L1.2 exit behavior. If AER happens to be supported and
enabled, the error may be *reported* via AER.
Parse the 't-power-on-us' property from each Root Port node and program it
as part of host initialization using dw_pcie_program_t_power_on() before
link training.
This property in added to the dtschema here [1].
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: reworded comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link[1]: https://lore.kernel.org/all/20260205093346.667898-1-krishna.chundru@oss.qualcomm.com/
Link: https://patch.msgid.link/20260428-t_power_on_fux-v5-3-f1ef926a91ff@oss.qualcomm.com
The T_POWER_ON indicates the time (in μs) that a Port requires the port on
the opposite side of Link to wait in L1.2.Exit after sampling CLKREQ#
asserted before actively driving the interface. This value is used by the
ASPM driver to compute the LTR_L1.2_THRESHOLD.
Currently, some controllers expose T_POWER_ON value of zero in the L1SS
capability registers, leading to incorrect LTR_L1.2_THRESHOLD calculations,
which can result in improper L1.2 exit behavior and if AER happens to be
supported and enabled, the error may be *reported* via AER.
Add a helper to override T_POWER_ON value by the DWC controller drivers.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: changed t_power_on to u32]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260428-t_power_on_fux-v5-2-f1ef926a91ff@oss.qualcomm.com
Add pcie_encode_t_power_on() to encode the PCIe L1 PM Substates T_POWER_ON
parameter into the T_POWER_ON Scale and T_POWER_ON Value fields.
This helper can be used by the controller drivers to change the
default/wrong value of T_POWER_ON in L1SS capability register to avoid
incorrect calculation of LTR_L1.2_THRESHOLD value.
The helper converts a T_POWER_ON time specified in microseconds into the
appropriate scale/value encoding defined by PCIe r7.0, sec 7.8.3.2. Values
that exceed the maximum encodable range are clamped to the largest
representable encoding.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: changed t_power_on_us to u32, added helper name to subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260428-t_power_on_fux-v5-1-f1ef926a91ff@oss.qualcomm.com
The driver currently supports two PERST# and PHY DT configurations. In one
case, PHY and PERST# are described in the RC node. In the other case, they
are described in the RP node.
A mixed setup is not supported. One common example is PHY on the RP node
while PERST# remains on the RC node. In that case the driver goes through
the RP parse path, does not find PERST# on RP, and does not report an error
because PERST# is optional. Probe can then succeed silently while PERST# is
left uncontrolled, and PCIe endpoints fail to work later. This silent
probe success makes debugging difficult.
Handle this mixed case in the RP parse path by checking whether PERST# is
present on RC and, if so, using the RC PERST# GPIO for RP ports while
keeping RP parsing for PHY. Emit a warning to indicate mixed DT content so
it can be fixed.
This keeps mixed systems functional and makes the configuration issue
visible instead of failing later at endpoint bring-up.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: folded the fix: https://lore.kernel.org/linux-pci/20260526-fix_perst_gpio_handling-v1-1-9170507bb4e9@oss.qualcomm.com]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260508-mix_perst_phy_dts-v1-1-9eff6ee9b51a@oss.qualcomm.com
Loongson 7A series PCH contain a LPC IRQ controller.
Add the device tree node of it.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The RTC's address is after UARTs, however the node is currently before
them.
Re-order the node to match address sequence.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
kconfiglint reports:
K008: config FIT_IMAGE_FDT_EPM5 has prompts in 2 separate definitions
The FIT_IMAGE_FDT_EPM5 Kconfig symbol is defined identically in two places:
arch/mips/Kconfig:1052
arch/mips/mobileye/Kconfig:17
Both have the same prompt, depends, default, and help text. Since
arch/mips/mobileye/Kconfig is sourced from arch/mips/Kconfig, both
definitions are parsed and the symbol ends up with two prompts.
The symbol was first introduced in commit 101bd58fde ("MIPS: Add
support for Mobileye EyeQ5") directly in
arch/mips/Kconfig. Three months later, commit fbe0fae601 ("MIPS:
mobileye: Add EyeQ6H support") created the
arch/mips/mobileye/Kconfig sub-file to organize the growing Mobileye
platform code and added the MACH_EYEQ5/MACH_EYEQ6H choice along with
a copy of FIT_IMAGE_FDT_EPM5. However, the original definition in
arch/mips/Kconfig was not removed at that time, leaving a duplicate.
Remove the definition from arch/mips/Kconfig, keeping the one in
arch/mips/mobileye/Kconfig where it belongs alongside the related
MACH_EYEQ5 machine type definition that it depends on.
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, Ralink SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 16 bytes for
RT288X and 32 bytes for other Ralink SoCs.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The last user was removed in commit aea12071d6
("power/supply: Drop obsolete JZ4740 driver") and replaced by
a self-contained IIO-based driver. No file includes this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The last user was the JZ4740 MFD ADC driver, removed in commit
ff71266aa4 ("mfd: Drop obsolete JZ4740 driver") and replaced
by a self-contained IIO driver. No file includes or references
this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
A MIPS allmodconfig built with LLVM can select CPU_MIPS32_R1 together
with MIPS_MT_SMP. In that configuration clang invokes the integrated
assembler with -march=mips32, and the MIPS MT path in cps-vec.S fails
to assemble two jr.hb instructions:
arch/mips/kernel/cps-vec.S:376:2: error: instruction requires
a CPU feature not currently enabled
arch/mips/kernel/cps-vec.S:490:4: error: instruction requires
a CPU feature not currently enabled
The earlier jr.hb in the same file is already assembled inside a .set
MIPS_ISA_LEVEL_RAW scope. The two failing sites are reached after
popping back to the file's base ISA level, so LLVM correctly rejects
them for an R1 target.
Wrap those jr.hb instructions in the same ISA-level push/pop used by
the working site. This keeps the MT code unchanged while making the
required R2 hazard-branch encoding explicit to the assembler.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In 64-bit configurations calling the initial console output handler from
a kernel thread other than the initial one will result in a situation
where the stack has been placed in the XKPHYS 64-bit memory segment and
consequently so has been the buffer allocated there that is used as the
argument corresponding to the `%s' output conversion specifier for the
firmware's printf() entry point.
This 64-bit address will then be truncated by 32-bit firmware, resulting
in an attempt to access the wrong memory location, which in turn will
cause all kinds of unpredictable behaviour, such as a kernel crash:
Console: colour dummy device 160x64
Calibrating delay loop... 49.36 BogoMIPS (lpj=192512)
pid_max: default: 32768 minimum: 301
CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800
Oops[#1]:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121
$ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0
$ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073
$ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473
$12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000
$16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240
$20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b
$24 : ffffffffffffffbf 000000000203bd00
$28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800
Hi : 0000000000000000
Lo : 0000000000000aa8
epc : ffffffffbfc08364 0xffffffffbfc08364
ra : ffffffffbfc08800 0xffffffffbfc08800
Status: 140120e2 KX SX UX KERNEL EXL
Cause : 00000008 (ExcCode 02)
BadVA : 000000000203bd00
PrId : 00000430 (R4000SC)
Modules linked in:
Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d
80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38
0000000000000000 000000000203bd00 0000000000000000 0000000000000000
0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000002500000000 0000000000000000 0000000000000000 802c1a7400000000
0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172
6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320
806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000
...
Call Trace:
Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8)
>>
In this case the pointer in $4 was truncated from 0x980000000203bd00 to
0x000000000203bd00.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started.
Fix the issue by making the buffer static and initdata, and therefore
placed in the CKSEG0 32-bit compatibility segment, observing that the
console output handler is called with the console lock held, implying
no need for this code to be reentrant. Add an assertion to verify the
buffer actually has been placed in a compatibility segment.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is no need for IOASIC DMA error interrupts to use the IRQF_ONESHOT
flag, because while they do need to have the source cleared only at the
conclusion of handling, the action handler supplied is either run in the
hardirq context with interrupts disabled at the CPU level or, where IRQ
threading has been forced, the primary handler has the IRQF_ONESHOT flag
implicitly added and therefore the original action handler, now run as
the thread handler and with interrupts enabled in the CPU, is executed
with the originating interrupt line masked. Therefore no interrupt will
retrigger regardless until the original request has been handled.
Link: https://lore.kernel.org/r/20260127135334.qUEaYP9G@linutronix.de/
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove a bunch of compilation warnings for halt/reset handlers:
arch/mips/dec/reset.c:22:17: warning: no previous prototype for 'dec_machine_restart' [-Wmissing-prototypes]
22 | void __noreturn dec_machine_restart(char *command)
| ^~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:27:17: warning: no previous prototype for 'dec_machine_halt' [-Wmissing-prototypes]
27 | void __noreturn dec_machine_halt(void)
| ^~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:32:17: warning: no previous prototype for 'dec_machine_power_off' [-Wmissing-prototypes]
32 | void __noreturn dec_machine_power_off(void)
| ^~~~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:38:13: warning: no previous prototype for 'dec_intr_halt'
[-Wmissing-prototypes]
38 | irqreturn_t dec_intr_halt(int irq, void *dev_id)
| ^~~~~~~~~~~~~
(which get promoted to compilation errors with CONFIG_WERROR), by moving
the local prototypes from arch/mips/dec/setup.c to a dedicated header
for arch/mips/dec/reset.c to use as well. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As from commit 8f99a16265 ("MIPS: Tracing: Add IRQENTRY_EXIT section
for MIPS") do_IRQ() is not a macro anymore and can be invoked directly
from assembly code, as a tail call. Remove the dec_irq_dispatch() stub
then and the indirection previously introduced with commit 187933f236
("[MIPS] do_IRQ cleanup"), improving performance by reducing the number
of control flow changes and the overall instruction count, while fixing
a compiler's complaint about a missing prototype for said stub:
arch/mips/dec/setup.c:780:25: warning: no previous prototype for 'dec_irq_dispatch' [-Wmissing-prototypes]
780 | asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)
| ^~~~~~~~~~~~~~~~
(which gets promoted to a compilation error with CONFIG_WERROR).
Fixes: 8f99a16265 ("MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As from commit 8f99a16265 ("MIPS: Tracing: Add IRQENTRY_EXIT section
for MIPS") do_IRQ() is not a macro anymore and can be invoked directly
from assembly code again, however its `asmlinkage' annotation has never
been brought back from the previous removal of the function with commit
187933f236 ("[MIPS] do_IRQ cleanup").
Since calling the function directly from assembly code has a performance
advantage, add the annotation back so that the DEC platform can make use
of this again.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix an issue in call_o32() where the upper 32-bit half of incoming n64
stack arguments is fetched and used for outgoing o32 stack arguments on
big-endian platforms.
This code was adapted from arch/mips/dec/prom/call_o32.S which was meant
for a little-endian platform only and therefore using 32-bit loads from
64-bit stack slot locations holding incoming stack arguments resulted in
correct values being retrieved for data that is expected to be 32-bit.
This works on little-endian platforms where the lower 32-bit half of the
64-bit value is located at every 64-bit stack slot location. However on
big-endian platforms the lower 32-bit half is instead located at offset
4 from every 64-bit stack slot location.
So to fix the issue the offset of 4 would have to be used on big-endian
platforms only, or alternatively a 64-bit load from the 64-bit stack
slot location can be used across the board, as the subsequent 32-bit
store to the corresponding outgoing stack argument slot will correctly
truncate the value and cause no unpredictable result. We already take
advantage of this architectural feature for the incoming arguments held
in $a6 and $a7 registers, since the o32 wrapper does not know how many
incoming arguments there are and consequently propagates incoming data
which may not be 32-bit.
Since this code is generally supposed to be used with the stack located
in cached memory there is no extra overhead expected for 64-bit loads as
opposed to 32-bit ones, so pick this variant for code simplicity.
Fixes: 231a35d372 ("[MIPS] RM: Collected changes")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This function is not used outside of this compilation unit so make it
static.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
GPIOLIB wants to remove the software node's name matching against GPIO
controller's label that is going on behind the scenes in software node
lookup. To that end, we need to convert all existing users to using
software nodes actually attached to the GPIO devices they represent.
In order to use an attached software node with the GPIO controller on
rb532: convert the GPIO module into a real platform device, provide
platform device info for it in device.c and assign the software node
using its swnode field.
The software node will get inherited by the GPIO chip from the parent
platform device in devm_gpiochip_add_data() as we don't set the fwnode
using any other of the mechanisms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As currently there are maybe multiple remote processors, so change from
using fixed name to using device node name as remote processor name in
order to make them can be distinguished by through of name in sys
filesystem.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260508032016.27716-1-Jiafei.Pan@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The Behringer Flow 8 (1397:050c) is an 8-channel USB mixer that
declares OUT EP 0x01 with implicit feedback from capture EP 0x81 via
its UAC2 endpoint companion descriptor. After 5-35 minutes of
continuous playback, the device occasionally returns a capture URB in
which every iso_frame_desc has a non-zero status (-EXDEV bursts,
visible as rate-limited "frame N active: -18" lines in dmesg from
pcm.c).
In that case snd_usb_handle_sync_urb() at endpoint.c counts bytes==0
and falls into the early "skip empty packets" return originally added
for M-Audio Fast Track Ultra. As a result the playback EP loses its
sole IFB-driven feeder and the OUT ring starves permanently: hw_ptr
stops advancing while substream state remains RUNNING. Only USB
re-enumeration recovers.
Three independent ftrace captures (taken at the moment of stall via a
userspace watchdog) consistently show:
- 60-70 capture URB completions in the 70ms window before the marker
- 0 retire_playback_urb / queue_pending_output_urbs /
snd_usb_endpoint_implicit_feedback_sink calls
- every usb_submit_urb in the window comes from
snd_complete_urb+0x64e (capture self-resubmit), none from the
queue_pending_output_urbs path
Add a new opt-in quirk QUIRK_FLAG_IFB_SILENCE_ON_EMPTY: when set, the
early return is skipped and we fall through to enqueue a packet_info
whose packet_size[i] are all 0 (the existing loop already maps
status!=0 packets to size 0). prepare_outbound_urb then emits a
silence packet, the OUT ring keeps moving, and the device rides
through the glitch.
The default behaviour (early return) is preserved for all existing
devices including M-Audio Fast Track Ultra. Only Flow 8 opts in here.
Cc: stable@vger.kernel.org
Signed-off-by: Gordon Chen <chengordon326@gmail.com>
Link: https://patch.msgid.link/20260526072906.90106-1-chengordon326@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reading /proc/interrupts iterates over the interrupt number space one by
one and looks up the descriptors one by one. That's just a waste of time.
When CONFIG_GENERIC_IRQ_SHOW is enabled this can utilize the maple tree and
cache the descriptor pointer efficiently for the sequence file operations.
Implement a CONFIG_GENERIC_IRQ_SHOW specific version in the core code and
leave the fs/proc/ variant for the legacy architectures which ignore generic
code.
This reduces the time wasted for looking up the next record significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.165280601@kernel.org
The chip name column in the /proc/interrupt output is 8 characters and
right aligned, which causes visual clutter due to the fixed length and the
alignment. Many interrupt chips, e.g. PCI/MSI[X] have way longer names.
Update the length when a chip is assigned to an interrupt and utilize this
information for the output. Align it left so all chip names start at the
begin of the column.
Update the GDB script as well and disentangle the header maze so it
actually works with all .config combinations.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.085786035@kernel.org
... in preparation for a smarter iterator for /proc/interrupts.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.005787611@kernel.org
Prepare for a smarter iterator for /proc/interrupts so that the next
interrupt descriptor can be cached after lookup.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194931.917415190@kernel.org
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
Calculating the precision of the interrupt number column on every initial
show_interrupt() invocation is a pointless exercise as the underlying
maximum number of interrupts rarely changes.
Calculate it only when that number is modified and let show_interrupts()
use the cached value.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.760664517@kernel.org
show_interrupts() evaluates a boatload of conditions to establish whether
it should expose an interrupt in /proc/interrupts or not.
That can be simplified by caching the condition in an internal status flag,
which is updated when one of the relevant inputs changes.
The irq_desc::kstat_irq check is dropped because visible interrupt
descriptors always have a valid pointer.
As a result the number of instructions and branches for reading
/proc/interrupts is reduced significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.680943749@kernel.org
Eventually blocking functions cannot be invoked with interrupts disabled
and a raw spin lock held. Restructure the code so this happens outside of
the descriptor lock held region.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260517194931.601972758@kernel.org
... to avoid function calls in the core code to retrieve the maximum number
of interrupts.
Rename it to 'total_nr_irqs' as 'nr_irqs' is too generic and fix up the
'nr_irqs' reference in the related GDB script as well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.522168332@kernel.org
x86 changed the interrupt statistics from a struct with individual members
to an counter array. It also provides a corresponding info array with the
strings for prefix and description and an indicator to skip the entry.
Update the already out of sync GDB script to use the counter and the info
array, which keeps the GDB script in sync automatically.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260517194931.442613033@kernel.org
The special treatment of these counts is just adding extra code for no real
value. The irq_stats mechanism allows to suppress output of counters, which
should never happen by default and provides a mechanism to enable them for
the rare case that they occur.
Move the IOAPIC misrouted and the PIC/APIC error counts into irq_stats,
mark them suppressed by default and update the sites which increment them.
This changes the output format of 'ERR' and 'MIS' in case there are events
to the regular per CPU display format and otherwise suppresses them
completely.
As a side effect this removes the arch_cpu_stat() mechanism from proc/stat
which was only there to account for the error interrupts on x86 and missed
to take the misrouted ones into account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.361942103@kernel.org
Unlikely interrupt counters like the spurious vector and the synthetic APIC
ICR read retry show up in /proc/interrupts with all counts 0 most of the
time.
As these are events which should never happen, suppress them by default and
enable them for output when they actually happen.
This requires a seperate bitmap as the description array is marked
__ro_after_init. With that bitmap in place it becomes RO data.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.276486277@kernel.org
Having the x86 specific interrupt statistics as a data structure with
individual members instead of an array is just stupid as it requires
endless copy and paste in arch_show_interrupts() and arch_irq_stat_cpu(),
where the latter does not even take the latest interrupt additions into
account. The resulting #ifdef orgy is just disgusting.
Convert it to an array of counters, which does not make a difference in the
actual interrupt hotpath increment as the array index is constant and
therefore not any different than the member based access.
But in arch_show_interrupts() and arch_irq_stat_cpu() this just turns into
a loop, which reduces the text size by ~2k (~12%):
text data bss dec hex filename
19643 15250 904 35797 8bd5 ../build/arch/x86/kernel/irq.o
17355 15250 904 33509 82e5 ../build/arch/x86/kernel/irq.o
Adding a new vector or software counter only requires to update the table
and everything just works. Using the core provided emit function which
speeds up 0 outputs makes it significantly faster.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.196070643@kernel.org
Interrupts which are not marked per CPU increment not only the per CPU
statistics, but also the accumulation counter irq_desc::tot_count.
Change the counter to type unsigned long so it does not produce sporadic
zeros due to wrap arounds on 64-bit machines and do a quick check for non
per CPU interrupts. If the counter is zero, then simply emit a full set of
zero strings. That spares the evaluation of the per CPU counters completely
for interrupts with zero events.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.115522199@kernel.org
A large portion of interrupt count entries are zero. There is no point in
formatting the zero value as it is way cheeper to just emit a constant
string.
Collect the number of consecutive zero counts and emit them in one go
before a non-zero count and at the end of the line.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.034728540@kernel.org
Monitoring tools periodically scan /proc/interrupts to export metrics as a
timeseries for future analysis and investigation.
In large fleets, /proc/interrupts is polled (often every few seconds) on
every machine. The cumulative overhead adds up quickly across thousands
of nodes, so reducing the cost of generating these stats does have a
measurable operational impact. With the ongoing trend toward higher core
counts per machine, this cost becomes even more noticeable over time,
since interrupt counters are per-CPU. In Meta's fleet, we have observed
this overhead at scale.
Although a binary /proc interface would be a better long-term solution
due to lower formatting (kernel side) and parsing (userspace side)
overhead, the text interface will remain in use for some time, even if
better solutions will be available. Optimizing the /proc/interrupts
printing code is therefore still beneficial.
Function seq_printf() supports rich format string for decimals printing,
but it doesn't required for printing /proc/interrupts per CPU counters,
seq_put_decimal_ull_width() function can be used instead to print per
CPU counters, because very limited formatting is required for this case.
Similar optimization idea is already used in show_interrupts().
As a side effect this aligns the x86 decriptions with the generic
interrupts event descriptions.
Performance counter stats (truncated) for 'sh -c cat /proc/interrupts
Before:
3.42 msec task-clock # 0.802 CPUs utilized ( +- 0.05% )
1 context-switches # 291.991 /sec ( +- 0.74% )
0 cpu-migrations # 0.000 /sec
343 page-faults # 100.153 K/sec ( +- 0.01% )
8,932,242 instructions # 1.66 insn per cycle ( +- 0.34% )
5,374,427 cycles # 1.569 GHz ( +- 0.04% )
1,483,154 branches # 433.068 M/sec ( +- 0.22% )
28,768 branch-misses # 1.94% of all branches ( +- 0.31% )
0.00427182 +- 0.00000215 seconds time elapsed ( +- 0.05% )
After:
2.39 msec task-clock # 0.796 CPUs utilized ( +- 0.06% )
1 context-switches # 418.541 /sec ( +- 0.70% )
0 cpu-migrations # 0.000 /sec
343 page-faults # 143.560 K/sec ( +- 0.01% )
7,020,982 instructions # 1.30 insn per cycle ( +- 0.52% )
5,397,266 cycles # 2.259 GHz ( +- 0.06% )
1,569,648 branches # 656.962 M/sec ( +- 0.08% )
25,419 branch-misses # 1.62% of all branches ( +- 0.72% )
0.00299996 +- 0.00000206 seconds time elapsed ( +- 0.07% )
Relative speed up in time elapsed is around 29%.
[ tglx: Fixed it up so it applies to current mainline ]
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/aQj5mGZ6_BBlAm3B@shell.ilvokhin.com
Link: https://patch.msgid.link/20260517194930.949709489@kernel.org
When build-testing this driver without CONFIG_IRQ_DOMAIN causes
a compile-time error:
drivers/regulator/mt6363-regulator.c: In function 'mt6363_regulator_probe':
drivers/regulator/mt6363-regulator.c:884:18: error: implicit declaration of function 'irq_find_host' [-Wimplicit-function-declaration]
884 | domain = irq_find_host(interrupt_parent);
| ^~~~~~~~~~~~~
drivers/regulator/mt6363-regulator.c:884:16: error: assignment to 'struct irq_domain *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
884 | domain = irq_find_host(interrupt_parent);
| ^
drivers/regulator/mt6363-regulator.c:896:30: error: implicit declaration of function 'irq_create_fwspec_mapping'; did you mean 'irq_create_of_mapping'? [-Wimplicit-function-declaration]
896 | info->virq = irq_create_fwspec_mapping(&fwspec);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| irq_create_of_mapping
This is rather hard to trigger because so many other drivers
enable IRQ_DOMAIN already, but I ran into this on an s390
randconfig build.
Ensure this is always enabled using a Kconfig 'select IRQ_DOMAIN'
entry, as we do for all other users of this.
Fixes: 3c36965df8 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260526102003.2527570-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the correct kernel-doc notation for struct members to eliminate
kernel-doc warnings:
Warning: drivers/gpu/drm/drm_panel.c:119 function parameter 'dev'
not described in 'devm_drm_panel_add'
Warning: drivers/gpu/drm/drm_panel.c:119 function parameter 'dev'
not described in 'devm_drm_panel_add'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605210648.RI4ufD66-lkp@intel.com/
Signed-off-by: Dongyang Jin <jindongyang@kylinos.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260521094545.3039207-1-jindongyang@kylinos.cn
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd.
as part of panel-simple.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260515082232.1766586-1-dario.binacchi@amarulasolutions.com
The .driver_data member of the struct pci_device_id array were
initialized by a list expressions to zero without making use of that
value. In this case it's better to not specify a value at all and let
the compiler fill in the zeros. Same for the list terminator that can
better be completely empty.
This patch doesn't introduce changes to the compiled array.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260522153010.777081-2-u.kleine-koenig@baylibre.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
