The 'gpio_devt' and 'gpiolib_initialized' variables are initialized only
during the init phase in the 'gpiolib_dev_init' function and never
changed. So, mark these as __ro_after_init.
The 'gpio_stub_drv' variable is initialized only in the declaration and
never changed. So, this variable could be 'const', but using the
'driver_register' and 'driver_unregister' functions discards the 'const'
qualifier. Therefore, as an alternative, mark it as a __ro_after_init.
Signed-off-by: Len Bao <len.bao@gmx.us>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260516105737.45174-1-len.bao@gmx.us
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
We are observing following warnings:
*ERROR* power well DC_off state mismatch (refcount 0/enabled 1)
gen9_dc_off_power_well_enabled is considering target state DC_STATE_DISABLE
as DC_OFF power well being enabled. Fix this by using wakeref for the
purpose.
To achieve this we need to modify notification code as well. Currently it
is possible that PSR gets notified vblank enable/disable twice on same
status. This is currently not a problem as it is just triggering call to
intel_display_power_set_target_dc_state with same target state as a
parameter. When using wakeref this becomes a problem due to reference
counting. Fix this storing vbank status on last notification and use that
to ensure there are no more than one notification with same vblank status.
v2: ensure there is no subsequent notifications with same status
Fixes: aa451abcff ("drm/i915/display: Prevent DC6 while vblank is enabled for Panel Replay")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260520104944.239797-2-jouni.hogander@intel.com
(cherry picked from commit 35485ac56d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Currently we are blocking DC states only when Panel Replay is enabled on
vblank enable. It may happen that Panel Replay is getting enabled when
vblank is already enabled. Fix this by blocking DC states always if Panel
Replay is supported.
While at it take care of possible dual eDP case by looping all encoders
supporting PSR.
Fixes: 0c427ac78a ("drm/i915/psr: Add interface to notify PSR of vblank enable/disable")
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260520104944.239797-1-jouni.hogander@intel.com
(cherry picked from commit eb5911f990)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
PTL with physically disconnected display was observed to have 40s longer
execution time when testing xe_fault_injection@xe_guc_mmio_send_recv.
The issue has not been seen when reverting commit 40a9f77a28 ("Revert
"drm/i915/dp: change aux_ctl reg read to polling read"").
Apparently the configuration suffers from not having AUX enabled when
using interrupts. One probable cause can be xe enabling interrupts too
late: interrupts need memory allocations which currently can't be done
before the display FB takeover is done.
As for now, use polling for AUX in case interrupts are unavailable.
Fixes: 40a9f77a28 ("Revert "drm/i915/dp: change aux_ctl reg read to polling read"")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260416163744.288107-1-michal.grzelak@intel.com
(cherry picked from commit 05e0550b65)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(),
move casting it to an i915_tt object later to actually get the right
pointer.
A user reported hitting the following bug under heavy use on DG2:
[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI
[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)
[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025
[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915]
[26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78
[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282
[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000
[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff
[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000
[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0
[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0
[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000
[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0
[26620.095612] PKRU: 55555554
[26620.095612] Call Trace:
[26620.095615] <TASK>
[26620.095615] i915_ttm_move+0x2b9/0x420 [i915]
[26620.095642] ? ttm_tt_init+0x65/0x80 [ttm]
[26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915]
[26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm]
[26620.095669] ttm_bo_evict+0x100/0x150 [ttm]
[26620.095671] ? preempt_count_add+0x64/0xa0
[26620.095673] ? _raw_spin_lock+0xe/0x30
[26620.095675] ? _raw_spin_unlock+0xd/0x30
[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915]
[26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm]
[26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm]
[26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm]
[26620.095709] ? init_object+0x62/0xd0
[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm]
[26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915]
[26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915]
[26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095786] ? alloc_debug_processing+0xd0/0x100
[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915]
[26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915]
[26620.095848] i915_vma_pin_ww+0x706/0x980 [i915]
[26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095904] eb_validate_vmas+0x170/0xa00 [i915]
[26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915]
[26620.095953] ? alloc_debug_processing+0xd0/0x100
[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.095977] ? __wake_up_sync_key+0x32/0x50
[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.096001] ? __slab_alloc.isra.0+0x67/0xc0
[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]
Results from decode_stacktrace.sh pointed to dereference of a file pointer
field of a i915 TTM page vector container associated with an object being
purged on eviction. That path is taken when the object is marked as no
longer needed.
Code analysis revealed a possibility of the i915 TTM page vector container
being replaced with a new instance inside a function that purges content
of the object, should it be still busy. That function is called,
indirectly via a more general function that changes the object's placement
and caching policy, before the problematic dereference, but still after
a pointer to the container is captured, rendering the pointer no longer
valid.
Fix the issue by capturing the pointer to the container only after its
potential replacement.
v2: Move the container_of() inside the if block (Sebastian),
- a simplified version of the commit description that explains briefly
why the change is necessary (Christian).
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/14882
Fixes: 7ae034590c ("drm/i915/ttm: add tt shmem backend")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.17+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260508122612.469227-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 4462966a93)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
The cursor plane patch was stalled for a too long time that the
struct drm_atomic_state parameter of atomic modeset hooks has been
changed to struct drm_atomic_commit.
Fix this by replacing the parameter's type. All helpers that retrieve
information from this struct are also changed so simply replacing the
type works.
Fixes: 8c4ae21891 ("drm: verisilicon: add support for cursor planes")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260525153618.1336239-1-zhengxingda@iscas.ac.cn
If port->irq_high is -1 (fsl,imx21-gpio compatible) and gpio_idx is >= 16
enable_irq_wake() is called with -1 which is wrong.
Fixes: 5f6d1998ad ("gpio: mxc: release the parent IRQ in runtime suspend")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260526063504.25916-1-alexander.stein@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Clean up whitespace misalignment in meson-axg-gpio.h
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260524154954.385778-1-jerrysteve1101@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Commit 91e74fa8b1 ("kho: make sure preservations do not span multiple
NUMA nodes") made sure preservations from kho_preserve_pages() do not
span multiple NUMA nodes. If they do, the order is reduced and tried
again.
The same logic was not implemented for kho_unpreserve_pages(). This can
result in unpreserve calculating a different order than preserve, and
thus not actually unpreserving the pages.
Fix this by moving the order calculation logic to
__kho_preserve_pages_order() and use it from both preserve and
unpreserve paths.
Move __kho_unpreserve() down to avoid having a forward declaration. Its
users are further down in the file anyway. Also, it results in grouping
for all the page-level preservation and unpreservation functions. This
unfortunately makes the diff hard to read, but the main change in
__kho_unpreserve() is to call __kho_preserve_pages_order() instead of
open-coding the order calculation.
Fixes: 91e74fa8b1 ("kho: make sure preservations do not span multiple NUMA nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260519133332.2498092-1-pratyush@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
KHO_TREE_MAX_DEPTH is calculated as:
DIV_ROUND_UP(KHO_ORDER_0_LOG2 - KHO_BITMAP_SIZE_LOG2,
KHO_TABLE_SIZE_LOG2) + 1
For systems with 16KB pages (e.g. arm64 with CONFIG_ARM64_16K_PAGES=y or
LoongArch), this gives a depth of 4. Since levels are 0 based, with
depth = 4 the effective top level is 3 and the top-level shift at bit 39.
PAGE_SHIFT = 14
KHO_BITMAP_SIZE_LOG2 = PAGE_SHIFT + 3 = 17
KHO_TABLE_SIZE_LOG2 = log(2; (1 << PAGE_SHIFT) / 8) = 11
shift = ((3 - 1) * KHO_TABLE_SIZE_LOG2) + KHO_BITMAP_SIZE_LOG2 = 39
The order-0 bit sits at bit 50 (KHO_ORDER_0_LOG2 = 64 - PAGE_SHIFT =
50). When inserting or reading a key, the index extracted at the top
level is:
(1 << 50) >> 39 = 2048
2048 is exactly the table size (PAGE_SIZE / sizeof(phys_addr_t) = 2048
for 16KB pages), so it wraps to 0, aliasing the order bit to index 0
and losing it silently.
On the second kernel, kho_radix_decode_key() sees a key without the
order bit, calls fls64() on the wrong bit, computes a wrong order and
thus a garbage physical address. phys_to_page() of that address faults
in kho_preserved_memory_reserve(), causing a kernel panic early in boot.
Fix by adding +1 to the DIV_ROUND_UP numerator so the formula accounts
for the order bit itself, giving depth 5 for 16KB pages. The top-level
shift becomes 50, and (1 << 50) >> 50 = 1, which is nonzero and
unambiguous. For 4KB and 64KB page sizes the depth is unchanged.
Link: https://patch.msgid.link/20260509024415.33190-1-dongtai.guo@linux.dev
Fixes: 3f2ad90060 ("kho: adopt radix tree for preserved memory tracking")
Tested-by: Kexin Liu <liukexin@kylinos.cn>
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
[rppt: added actual math to the changelog]
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The Makefile version of rustc-option currently checks whether the option
exists for the host target instead of the target actually being compiled
for. It was done this way in commit 46e24a545c ("rust: kasan/kbuild:
fix missing flags on first build") to avoid a circular dependency on
target.json. However, because of this, rustc-option currently does not
function when cross-compiling from x86_64 to aarch64 if
CONFIG_SHADOW_CALL_STACK is enabled. This is because KBUILD_RUSTFLAGS
contains -Zfixed-x18 under this configuration. Since that flag does not
exist on the host target, rustc-option runs into a compilation failure
every time, leading to all flags being rejected as unsupported.
To fix this, update rustc-option to pass a --target parameter so that
the host target is not used. For targets using target.json, use a
built-in target that is as close as possible to the target created with
target.json to avoid the circular dependency on target.json.
One scenario where this causes a boot failure:
* Cross-compiled from x86_64 to aarch64.
* With CONFIG_SHADOW_CALL_STACK=y
* With CONFIG_KASAN_SW_TAGS=y
* With CONFIG_KASAN_INLINE=n
Then the resulting kernel image will fail to boot when it first calls
into Rust code with a crash along the lines of "Unable to handle kernel
paging request at virtual address 0ffffffc08541796". This is because the
call threshold is not specified, so rustc will inline kasan operations,
but the kasan shadow offset is not specified, which leads to the inlined
kasan instructions being incorrect.
Note that the -Zsanitizer=kernel-hwaddress parameter itself does not
lead to a rustc-option failure despite being aarch64-specific because
RUSTFLAGS_KASAN has not yet been added to KBUILD_RUSTFLAGS when
rustc-option is evaluated by the kasan Makefile.
Cc: stable@vger.kernel.org
Fixes: 46e24a545c ("rust: kasan/kbuild: fix missing flags on first build")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260507-rustc-option-cross-v2-1-2f650a49c2b5@google.com
[ Edited slightly:
- Reset variable to avoid using the environment.
- Use a simply expanded variable flavor for simplicity.
- Export variable so that behavior in sub-`make`s is consistent.
This matches other variables. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to allow comparing trace timestamps between different
systems or virtual machines on s390, add a s390-tod trace clock.
This clock just uses the returned TOD clock value from stcke
directly.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove unconditional 'n' defaults from def_tristate statements,
as they override the later 'KUNIT_ALL_TESTS' default, rendering
it dead Kconfig code.
This dead code was identified by kconfirm, a static analysis tool
for Kconfig.
Also include S390_KPROBES_SANITY_TEST in KUNIT_ALL_TESTS.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Replace symbolic permissions with octal permissions, which are preferred.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
allmodconfig with clang W=1 points out unused global variables:
drivers/s390/char/zcore.c:49:23: error: variable
'zcore_reipl_file' set but not used [-Werror,-Wunused-but-set-global]
drivers/s390/char/zcore.c:50:23: error: variable
'zcore_hsa_file' set but not used [-Werror,-Wunused-but-set-global]
Remove both of them, since there is no point in keeping them.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
allmodconfig with clang W=1 points out an unused global variable:
drivers/s390/char/sclp_vt220.c:85:12: error: variable
'sclp_vt220_buffered_chars' set but not used [-Werror,-Wunused-but-set-global]
Just remove it.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
allmodconfig with clang W=1 points out an unused global variable:
arch/s390/kernel/debug.c:1237:33: error: variable
's390dbf_sysctl_header' set but not used [-Werror,-Wunused-but-set-global]
Just remove the variable. There is no point in adding error handling for a
failing register_sysctl() call.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
allmodconfig with clang W=1 points out an unused global variable:
arch/s390/appldata/appldata_base.c:54:33: error: variable
'appldata_sysctl_header' set but not used [-Werror,-Wunused-but-set-global]
Just remove the variable. There is no point in adding error handling for a
failing register_sysctl() call.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Enable IOMMUFD and VFIO cdev such that PCI pass-through to QEMU/KVM can
optionally utilize native IOMMUFD. Note that because the defconfigs do
not enable IOMMUFD_VFIO_CONTAINER the default PCI pass-through using
VFIO with the existing container interface is not affected.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The simple_write_to_buffer() will only initialize data starting from
the *pos offset so if it's non-zero then the first part of the buffer
uninitialized. Really, if *pos is non-zero then this code won't work
so just check for that at the start of the function.
Fixes: 320323d2e5 ("accel/ivpu: Add debugfs interface for setting HWS priority bands")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/ahP24m6Mii9EDL7Q@stanley.mountain
The sequencer priority queue insertion path uses a hardcoded traversal
limit of 10000 entries. The value is intended to catch a corrupted list,
but it also becomes a real limit for valid queues.
The event pool limit is per client, while a sequencer queue can be shared
by multiple clients. A queue can therefore legitimately contain more than
10000 events. In that case, inserting an event that has to be placed past
the arbitrary limit fails with -EINVAL.
Use the queue's own cell count as the traversal bound instead. This keeps
the protection against inconsistent list accounting or cyclic lists without
rejecting valid large queues.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260525-alsa-seq-prioq-limit-v1-1-16c348df5ff7@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The st,stmpe-pwm binding is already covered by the MFD schema
Documentation/devicetree/bindings/mfd/st,stmpe.yaml. Remove the
obsolete and redundant text binding file.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260523173251.72540-3-manishbaing2789@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260518172323.932774-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add one secondary optional bus clock for the PWM PXA driver, also keep it
compatible with old single clock.
The SpacemiT K3 SoC require a bus clock for PWM controller, acquire and
enable it during probe phase.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260428-03-k3-pwm-drv-v2-2-a532bbe45556@kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The PWM controller in SpacemiT K3 SoC reuse the same IP as previous K1
generation, while the difference is that one additional bus clock is
added.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-03-k3-pwm-drv-v2-1-a532bbe45556@kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
When the driver was converted to the waveform API the need for this
function arised but at that time this function didn't exist yet. In the
meantime it's available, so switch to the global function and drop the
driver specific implementation.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/788319f0fff963feca4df3c5fcdd471dcf70ccdf.1776264104.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The .driver_data member in the various struct pci_device_id arrays were
initialized by list expressions. This isn't easily readable if you're
not into PCI. Using named initializers is more explicit and thus easier
to parse.
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260504085535.1914668-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Driver for the PWM block in Qualcomm IPQ6018 line of SoCs. Based on
driver from downstream Codeaurora kernel tree. Removed support for older
(V1) variants because I have no access to that hardware.
Tested on IPQ5018 and IPQ6010 based hardware.
Co-developed-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260406-ipq-pwm-v21-2-6ed1e868e4c2@outlook.com
[ukleinek: Fixed a few nitpicks as agreed on the mailing list]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
This option was never meant to be used in production because it solely
clears the X86_FEATURE kernel-internal representation of what CPUID bits
it has detected and doesn't do any *proper* feature disablement like
clearing CR4.CET in the user shadow stack case, for example.
So remove its documentation so that it doesn't get used in production
and people get silly ideas. It is meant strictly for debugging; and if
a chicken bit for properly disabling a feature is warranted, then that
would need proper enablement.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/20260520202508.160112-1-bp@kernel.org
Previously, the number of Hypervisor Guest External Interrupt (HGEI)
lines was stored in a single global variable `kvm_riscv_aia_nr_hgei`
and assumed to be the same for all HARTs. This assumption does not
hold on heterogeneous RISC-V SoCs where different cores may expose
different HGEIE CSR widths.
Introduce `nr_hgei` field into the per-CPU `struct aia_hgei_control`
and probe the actual supported HGEI count for the current HART in
`kvm_riscv_aia_enable()` using the standard RISC-V CSR probe technique:
csr_write(CSR_HGEIE, -1UL);
nr = fls_long(csr_read(CSR_HGEIE));
if (nr)
nr--;
All HGEI allocation, free and disable paths (`kvm_riscv_aia_free_hgei()`,
`kvm_riscv_aia_disable()`, etc.) now use the per-CPU value instead of
the global one.
The global `kvm_riscv_aia_nr_hgei` now represents the minimum number
of HGEI lines across HARTs and can be used to check whether HGEI
support is available or not.
This makes KVM AIA robust on big.LITTLE-style asymmetric platforms.
Signed-off-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260525094945.3721783-3-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add nr_guest_files in per-HART local config to represent the number of
guest files available on a particular HART whereas the nr_guest_files
in the global config represents the number of guest files available
across all HARTs.
This allows KVM RISC-V to use nr_guest_files from per-HART local
config for asymmetric big.Little systems.
Signed-off-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260525094945.3721783-2-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The ebreak self test enables/disables guest debugging as a part of the
test. However the KVM_SET_GUEST_DEBUG ioctl doesn't actually do it.
Fixing it by calling kvm_riscv_vcpu_config_guest_debug.
Fixes: 6ed523e2b6 ("RISC-V: KVM: Factor-out VCPU config into separate sources")
Signed-off-by: Mayuresh Chitale <mayuresh.chitale@oss.qualcomm.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260525095930.3924905-1-mayuresh.chitale@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The AGILEX_L3_MAIN_FREE_CLK is defined in the dt-bindings header but
was never implemented in the clock driver. Per the Agilex TRM,
l3_main_free_clk has no divider or mux and is a fixed 1:1 derivative
of noc_free_clk that clocks most of the interconnect datapath.
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Move fbdev emulation to DRM client buffers
. Reuses standard ADDFB2/GEM paths and simplifies cleanup.
- Use DRM format helpers for geometry and size
. Applies 4CC-based format/pitch/size calculation with stronger checks and PAGE_SIZE alignment.
. Sets screen_size and fix.smem_len from actual allocated size.
Exynos DRM internal cleanup
- Adopt DRM core DMA tracking and drop redundant code
. Removes private DMA tracking, exynos_drm_gem_prime_import(), and obsolete iommu_dma_init_domain() stub.
- Reduce duplication and tighten local scope
. Replaces MAX_FB_BUFFER with DRM_FORMAT_MAX_PLANES.
. Drops redundant exynos_drm_gem.size and internalizes local-only helpers.
Bug fix for Exynos fbdev behavior
- Fix screen_buffer offset handling
. Keeps screen_buffer at framebuffer base and avoids applying scanout offset.
. Includes Fixes and stable Cc for backporting.
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEEoxi+6c5pRPV/gdXcxWAb7Og/+bYFAmoPFggACgkQxWAb7Og/
+bbqFgv/SdNJlCKvpjgfOIDv39OTSWguFLJI9iAbeXMcAJUVMGC7oUQQdtKDVee+
mzEombaTQpToKB3BPifIYJUM30tAJ+/hZ4VpDGBqZT/sdEbFmVWJ/fU4iKHnyT71
TfJsczwR1xy5PEoiQk2cX40LoFXNu0r0eLV5OQo27P45aMsVKsXni3LvNQP67ItJ
wpEswGAZnqk72eZEDdKdxAyU6kL95nhvvG81dxJXdHoO0xUh86vjp9oCB/0SQaM9
qtfZAQyheXHzaVnWSdmHMz2uAaY5tflP2IrqSvebdGUuySreQ7AZTcw36MrWss2v
YFvdQR+R6cJ/5iorGFXWkQzY5zpusZDVxnGdgRQaE1CNUeI4MqyCfDqCfRZvr1hU
sn1HKzCcwL3PoE5bee/IwiiFhGCked+1cCOSyx9phzwns+iBt71jBP2z9MHLWgKS
gge8Vs8643TGfGqdtBnJbCJdRjUKKz61pPKUEw4T+zN0XeEkMQS3L2lQ1K5zyB8W
+Y2/q9vE
=sUUs
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
New feature and cleanup for Exynos fbdev
- Move fbdev emulation to DRM client buffers
. Reuses standard ADDFB2/GEM paths and simplifies cleanup.
- Use DRM format helpers for geometry and size
. Applies 4CC-based format/pitch/size calculation with stronger checks and PAGE_SIZE alignment.
. Sets screen_size and fix.smem_len from actual allocated size.
Exynos DRM internal cleanup
- Adopt DRM core DMA tracking and drop redundant code
. Removes private DMA tracking, exynos_drm_gem_prime_import(), and obsolete iommu_dma_init_domain() stub.
- Reduce duplication and tighten local scope
. Replaces MAX_FB_BUFFER with DRM_FORMAT_MAX_PLANES.
. Drops redundant exynos_drm_gem.size and internalizes local-only helpers.
Bug fix for Exynos fbdev behavior
- Fix screen_buffer offset handling
. Keeps screen_buffer at framebuffer base and avoids applying scanout offset.
. Includes Fixes and stable Cc for backporting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260521143624.56906-1-inki.dae@samsung.com
Ensure the entire TLV header is linearized before access by adding
sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,
a truncated frame could cause an out-of-bounds access.
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260523130330.61880-1-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'dpaa2_ethtool_stats' and 'dpaa2_ethtool_extras' structures are
initialized in their declarations and never changed. So, constify them
to reduce the attack surface.
Before the patch (size dpaa2-ethtool.o):
text data bss dec hex
33433 5992 0 39425 9a01
After the patch (size dpaa2-ethtool.o):
text data bss dec hex
34937 4488 0 39425 9a01
Signed-off-by: Len Bao <len.bao@gmx.us>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260523150737.36988-1-len.bao@gmx.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ratheesh Kannoth says:
====================
octeontx2-af: npc: Enhancements. [part]
Patch 1 reduces stack usage in mlx5e_pcie_cong_get_thresh_config()
by reusing a single union devlink_param_value across four
devl_param_driverinit_value_get() calls (instead of
union devlink_param_value val[4] on the stack) and assigning each
vu16 into mlx5e_pcie_cong_thresh, so the helper stays under the
frame-size warning limit as the union grows.
Patch 2 changes devlink_nl_param_value_put() and
devlink_nl_param_value_fill_one() to pass union devlink_param_value
by pointer instead of by value. Passing two copies of the union
by value in the param netlink path consumes over 500 bytes of argument
stack and risks CONFIG_FRAME_WARN as the union grows beyond its
historical size.
====================
Picking a couple of uncontroversial changes from the series
since it's making very slow progress.
Link: https://patch.msgid.link/20260521095303.2395584-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
union devlink_param_value grows substantially once U64 array
parameters are added to devlink (from 32 bytes to over 264 bytes).
devlink_nl_param_value_fill_one() and devlink_nl_param_value_put()
copy the union by value in several places. Passing two instances as
value arguments alone consumes over 528 bytes of stack; combined with
deeper call chains the parameter stack can approach 800 bytes and trip
CONFIG_FRAME_WARN more easily.
Switch internal helpers and exported driver APIs to pass pointers to
union devlink_param_value rather than passing the union by value.
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com> #for ena
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260521095303.2395584-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
union devlink_param_value grew when U64 array parameters were added.
Keeping union devlink_param_value val[4] in
mlx5e_pcie_cong_get_thresh_config() exceeded the compiler's
-Wframe-larger-than limit.
Reuse one union: call devl_param_driverinit_value_get() once per
MLX5 PCIe congestion threshold and assign each vu16 to the
corresponding mlx5e_pcie_cong_thresh member.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260521095303.2395584-3-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Add VIRTIO_GPU_F_BLOB_ALIGNMENT flag.
Cross-subsystem Changes:
- Add common TMDS character rate constants to video/hdmi and use those
in bridge drivers.
Core Changes:
- Fix leak in drm_syncobj_find_fence.
- Fix OOB reads related to DP-MST.
- Create drm_get_bridge_by_endpoint and convert drivers to use it in
preparation of hotplug.
Driver Changes:
- Assorted bugfixes and cleanups to accel/ethosu, imagination, virtio,
rockchip.
- Expandable device heap support to amdxdna, bridge/chipone-icn6211.
- Add Surface Pro 12 panels.
- Convert ite-it6211 to use drm hdmi audio helpers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f4034e3c-8290-49e1-9410-dc1f449265f4@linux.intel.com
Tariq Toukan says:
====================
net/mlx5: Add satellite PF support
A satellite PF is a new SmartNIC configuration that adds another
physical function on the DPU that is not an eswitch manager and not a
page manager. The satellite PF can have its own SFs and can be passed
through to a VM on the DPU, providing an isolated function for users who
should not have access to the privileged ECPF. The ECPF handles the
satellite PF and the host PF in a similar way, using the same management
framework.
This series adds support for satellite PFs (SPFs) in the mlx5 eswitch.
SPFs are discovered through the v1 response layout of the
query_esw_functions command, introduced in the previous infrastructure
preparation series.
The first four patches discover satellite PFs, allocate eswitch vports
for them and their SFs, and extend the SF hardware table to manage SPF
SF entries.
The next five patches expose PF numbers from firmware, map SF
controllers to their pfnum, register devlink ports with proper
attributes, and register SF resource on satellite PF ports.
The final four patches add devlink port state management, FDB peer miss
rules, dedicated page accounting, and SF resource registration for
satellite PF vports.
This series builds on the eswitch infrastructure preparation series
previously submitted.
====================
Link: https://patch.msgid.link/20260521110843.367329-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add MLX5_SPF to enum mlx5_func_type so SPFs get their own page counter,
and add the corresponding WARN check at page cleanup. Wait for SPF pages
to be reclaimed during ECPF teardown, alongside the existing host PF and
VF page waits.
SPF page requests are always identified by vhca_id, so the legacy
func_id_to_type() path is not reached for satellite PFs.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260521110843.367329-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
