The GENI SE protocol drivers (I2C, SPI, UART) implement similar resource
activation/deactivation sequences independently, leading to code
duplication.
Introduce geni_se_resources_activate()/geni_se_resources_deactivate() to
power on/off resources.The activate function enables ICC, clocks, and TLMM
whereas the deactivate function disables resources in reverse order
including OPP rate reset, clocks, ICC and TLMM.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-6-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently, core clk is handled individually in protocol drivers like
the I2C driver. Move this clock management to the common clock APIs
(geni_se_clks_on/off) that are already present in the common GENI SE
driver to maintain consistency across all protocol drivers.
Core clk is now properly managed alongside the other clocks (se->clk
and wrapper clocks) in the fundamental clock control functions,
eliminating the need for individual protocol drivers to handle this
clock separately.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-5-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GENI Serial Engine drivers (I2C, SPI, and SERIAL) currently duplicate
code for initializing shared resources such as clocks and interconnect
paths.
Introduce a new helper API, geni_se_resources_init(), to centralize this
initialization logic, improving modularity and simplifying the probe
function.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-4-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a new function geni_icc_set_bw_ab() that allows callers to set
average bandwidth values for all ICC (Interconnect) paths in a single
call. This function takes separate parameters for core, config, and DDR
average bandwidth values and applies them to the respective ICC paths.
This provides a more convenient API for drivers that need to configure
specific average bandwidth values.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "qup-memory" interconnect path is optional and may not be defined
in all device trees. Unroll the loop-based ICC path initialization to
allow specific error handling for each path type.
The "qup-core" and "qup-config" paths remain mandatory and will fail
probe if missing, while "qup-memory" is now handled as optional and
skipped when not present in the device tree.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
[...]
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-2-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LeMans EVK board routes the RX lines of CAN controllers 2, 4, and 6
(part of the RTSS subsystem) through a signal multiplexer controlled by
GPIO 4 of the I2C GPIO expander at address 0x3b. The remaining CAN
controllers, out of 8 total on RTSS, are wired directly to their
transceivers.
The multiplexer select pin defaults low on reset, disconnecting CAN 2,
4, and 6 RX lines from their respective transceivers, which results in
no data being received on these interfaces.
Configure GPIO 4 as output-high to assert the mux select line at boot,
connecting the RX signals of CAN 2, 4, and 6 to their transceivers as
required by the EVK board wiring.
Signed-off-by: Anup Kulkarni <anup.kulkarni@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260519064954.2759960-1-anup.kulkarni@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The i2c19 node at 0x88c000 uses GIC SPI 584, but that interrupt
belongs to the neighboring i2c18/spi18 node at 0x888000. The correct
interrupt for i2c19 is GIC SPI 585, as used by its sibling nodes
spi19 and uart19 which share the same register base and clock.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-glymur-fix-i2c19-irq-v1-1-7d5968bd9b2b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Expose the USB2 PHY reset in order to enable adding the USB nodes in DTS
for Nord.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-nord-clk-usb2-phy-v2-2-17a86cb307c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Provide the USB2 PHY reset definition in dt-bindings for the Nord negcc
module in order to enable adding the USB nodes in DTS.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-nord-clk-usb2-phy-v2-1-17a86cb307c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The remoteproc_adsp_glink label on the ADSP glink-edge node has no
users in the upstream tree across all affected SoCs. The only user
of this label is qcs6490-audioreach.dtsi which references the label
defined in its own SoC dtsi and is left untouched.
Remove the label from kaanapali, lemans, monaco, sar2130p, sc8180x,
sc8280xp, sm8450, sm8550, sm8650 and sm8750.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260409181329.556899-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The devm_memremap() function doesn't return NULL, it returns error
pointers. Fix the error checking to match.
Fixes: ac23106a9b ("soc: qcom: llcc-qcom: get SCT descriptors from fw-populated memory")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/ag1N_rAHEQ1YJsa7@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MR labelling is not used for DRM CI, however the job got enabled as
a part of the CI pipeline and now prevents it from being executed.
Disable the mr-label-maker-test job implicitly.
Link: https://gitlab.freedesktop.org/drm/msm/-/pipelines/1672049
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This reverts commit db359fccf2 ("mm: introduce a new page type for page
pool in page type") and a part of 735a309b4b ("net: add net_iov_init()
and use it to initialize ->page_type").
Netpp page_type'ed pages might be used in mapping so as to use @_mapcount.
However, since @page_type and @_mapcount are union'ed in struct page,
these two can't be used at the same time. Revert the commit introducing
page_type for Netpp for now.
The patch will be retried once @page_type and @_mapcount get allowed to be
used at the same time.
The revert also includes removal of @page_type initialization part
introduced by commit 735a309b4b ("net: add net_iov_init() and use it
to initialize ->page_type"), which will be restored on the retry.
Link: https://lore.kernel.org/20260515034701.17027-1-byungchul@sk.com
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Closes: https://lore.kernel.org/all/982b9bc1-0a0a-4fc5-8e3a-3672db2b29a1@nvidia.com
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Toke Hoiland-Jorgensen <toke@redhat.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__get_vm_area_node() currently triggers a BUG() if in_interrupt() returns
true. However, in_interrupt() also reports true when BH are disabled.
The bridge code can call rhashtable_lookup_insert_fast() with bottom
halves disabled:
__vlan_add()
-> br_fdb_add_local()
spin_lock_bh(&br->hash_lock); <-- Disable BH
-> fdb_add_local()
-> fdb_create()
-> rhashtable_lookup_insert_fast()
-> kvmalloc()
-> vmalloc()
-> __get_vm_area_node()
-> BUG_ON(in_interrupt())
spin_unlock_bh(&br->hash_lock)
this triggers the BUG() despite the caller not being in NMI or
hard IRQ context.
Replace the in_interrupt() check with in_nmi() || in_hardirq().
Link: https://lore.kernel.org/20260515153009.2296191-1-urezki@gmail.com
Fixes: c6307674ed ("mm: kvmalloc: add non-blocking support for vmalloc")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot+8b12fc6e0fb139765b58@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69ff8c7c.050a0220.1036b8.000b.GAE@google.com/
Reviewed-by: Baoquan He <baoquan.he@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due
to a PMD check failure, the pgtable allocated earlier via
pte_alloc_one() is never freed, causing a memory leak.
Added free_abort label to release the pgtable in error path.
Link: https://lore.kernel.org/20260501115122.23288-1-nueralspacetech@gmail.com
Fixes: a30b48bf1b ("mm/migrate_device: implement THP migration of zone device pages")
Signed-off-by: Sunny Patel <nueralspacetech@gmail.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a child process exits, it sends exit_signal to its parent via
do_notify_parent(). The clone() syscall constructs exit_signal as:
(lower_32_bits(clone_flags) & CSIGNAL)
CSIGNAL is 0xff, so values in the range 65-255 are possible. However,
valid_signal() only accepts signals up to _NSIG (64 on x86_64). A
non-zero non-valid exit_signal acts the same as exit_signal == 0: the
parent process is not signaled when the child terminates.
The syzkaller reproducer triggers this by calling clone() with flags=0x80,
resulting in exit_signal = (0x80 & CSIGNAL) = 128, which exceeds _NSIG and
is not a valid signal.
The v1 of this patch added the check only in the clone() syscall handler,
which is incomplete. kernel_clone() has other callers such as
sys_ia32_clone() which would remain unprotected. Move the check to
kernel_clone() to cover all callers.
Since the valid_signal() check is now in kernel_clone() and covers all
callers including clone3(), the same check in copy_clone_args_from_user()
becomes redundant and is removed. The higher 32bits check for clone3() is
kept as it is clone3() specific.
Note that this is a user-visible change: previously, passing an invalid
exit_signal to clone() was silently accepted. The man page for clone()
does not document any defined behavior for invalid exit_signal values, so
rejecting them with -EINVAL is the correct behavior. It is unlikely that
any sane application relies on passing an invalid exit_signal.
[oleg@redhat.com: the comment above kernel_clone() should be updated]
Link: https://lore.kernel.org/abwvgU17W8wuW2-J@redhat.com
Link: https://lore.kernel.org/20260316151956.563558-1-kartikey406@gmail.com
Fixes: 3f2c788a13 ("fork: prevent accidental access to clone3 features")
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: syzbot+bbe6b99feefc3a0842de@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbe6b99feefc3a0842de
Tested-by: syzbot+bbe6b99feefc3a0842de@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/20260307064202.353405-1-kartikey406@gmail.com/T/ [v1]
Link: https://lore.kernel.org/all/20260316104536.558108-1-kartikey406@gmail.com/T/ [v2]
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
flush_nmi_stats() drains per-node NMI slab atomics into the per-node
lruvec_stats, but does not propagate them to the memcg-level vmstats.
For non NMI case, account_slab_nmi_safe() calls mod_memcg_lruvec_state()
which updates both per-node lruvec_stats and memcg-level vmstats, so
flush_nmi_stats() needs to flush to per-node lruvec_stats as well as
memcg-level vmstats.
So fix this by flushing to the memcg-level vmstats for NMI too.
Link: https://lore.kernel.org/20260518082830.599102-1-alex@ghiti.fr
Fixes: 940b01fc8d ("memcg: nmi safe memcg stats for specific archs")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs maintains the DAMOS tried region directory objects via a
linked list. When the user requests refresh of the directories, DAMON
sysfs removes all the region directories first, and then generate updated
regions directory on the empty space. The removal function
(damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects.
Deletion of the container region object from the linked list is done
inside the kobj release callback function.
If somehow the callback invocation is delayed, the list will contain
regions list that gonna be freed. If the updated region directories
creation is started in this situation, the list can be corrupted and
use-after-free can happen.
Because the kobj objects are managed by only DAMON sysfs, the issue cannot
happen in normal situation. But, such delays can be made on kernels that
built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can
indeed be reproduced like below.
# damo start --damos_action stat
# cd /sys/kernel/mm/damon/admin/kdamonds/0/
# for i in {1..10}; do echo update_schemes_tried_regions > state; done
# dmesg | grep underflow
[ 89.296152] refcount_t: underflow; use-after-free.
Fix the issue by removing the region object from the list when
decrementing the reference count.
Also update damos_sysfs_populate_region_dir() to add the region object to
the list only after the kobject_init_and_add() is success, so that fail of
kobject_init_and_add() is not leaving the deallocated object on the list.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260518152559.93038-1-sj@kernel.org
Link: https://lore.kernel.org/20260513011920.119183-1-sj@kernel.org [1]
Fixes: 9277d0367b ("mm/damon/sysfs-schemes: implement scheme region directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption.
Link: https://lore.kernel.org/20260518063656.3721056-1-dev.jain@arm.com
Fixes: 354dffd295 ("mm: support batched unmap for lazyfree large folios during reclamation")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Harry Yoo <harry@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A crash was observed in zram_writeback_endio due to a NULL pointer
dereference in wake_up. The root cause is a race condition between the
bio completion handler (zram_writeback_endio) and the writeback task.
In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after
releasing wb_ctl->done_lock. This creates a race window where the
writeback task can see num_inflight become 0, return, and free wb_ctl
before zram_writeback_endio calls wake_up().
CPU 0 (zram_writeback_endio) CPU 1 (writeback_store)
============================ ============================
zram_writeback_slots
zram_submit_wb_request
zram_submit_wb_request
wait_event(wb_ctl->done_wait)
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
wake_up(&wb_ctl->done_wait);
zram_complete_done_reqs
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
while (num_inflight) > 0)
spin_lock(&wb_ctl->done_lock);
list_del(&req->entry);
spin_unlock(&wb_ctl->done_lock);
// num_inflight becomes 0
atomic_dec(num_inflight);
// Leave zram_writeback_slots
// Free wb_ctl
release_wb_ctl(wb_ctl);
// UAF crash!
wake_up(&wb_ctl->done_wait);
This patch fixes this race by using RCU. By protecting wb_ctl with
rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it,
we ensure that wb_ctl remains valid during the execution of
zram_writeback_endio.
Link: https://lore.kernel.org/20260512074918.2606208-1-richardycc@google.com
Fixes: f405066a1f ("zram: introduce writeback bio batching")
Signed-off-by: Richard Chang <richardycc@google.com>
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Martin Liu <liumartin@google.com>
Cc: wang wei <a929244872@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done.
Link: https://lore.kernel.org/20260505133922.797635-1-pratyush@kernel.org
Fixes: c4f75bc8bd ("mm/memfd: add write seals when apply SEAL_EXEC to executable memfd")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Jeff Xu <jeffxu@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
Link: https://lore.kernel.org/cover.1778336914.git.linpu5433@gmail.com
Link: https://lore.kernel.org/2eebe949bfa7d1f6e13b5be6a92c64c850ce9d45.1778336914.git.linpu5433@gmail.com
Fixes: 03f5956680 ("ipc: add sysctl to specify desired next object id")
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit ea52cb24cd ("mm/hugetlbfs: update hugetlbfs to use
mmap_prepare") with conflict resolution to account for changes in commit
ea52cb24cd ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare").
The patch incorrectly handled hugetlb VMA lock allocation at the
mmap_prepare stage, where a failed allocation occurring after mmap_prepare
is called might result in the lock leaking.
There is no risk of a merge causing a similar issues, as
VMA_DONTEXPAND_BIT is set for hugetlb mappings.
As a first step in addressing this issue, simply revert the change so we
can rework how we do this having corrected the underlying issues.
We maintain the VMA flags changes as best we can, accounting for the fact
that we were working with a VMA descriptor previously and propagating
like-for-like changes for this.
Note that we invoke vma_set_flags() and do not call vma_start_write() as
vm_flags_set() does. This is OK as it's being done in an .mmap hook where
the VMA is not yet linked into the tree so nobody else can be accessing
it.
Link: https://lore.kernel.org/20260512160643.266960-1-ljs@kernel.org
Fixes: ea52cb24cd ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Closes: https://lore.kernel.org/linux-mm/20260425070700.562229-1-25181214217@stu.xidian.edu.cn/
Acked-by: Muchun Song <muchun.song@linux.dev>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update my email address from @ge.com to @gehealthcare.com after GE
HealthCare was spun-off from GE.
Link: https://lore.kernel.org/20260506063335.3-1-ian.ray@gehealthcare.com
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both GCC [1] and Clang [2] consider the generic version of _THIS_IP_ to
be broken:
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
In particular, the address of a label is only expected to be used with a
computed goto.
While the generic version more or less works today, it is known to be
brittle and may break with current and future optimizations. For
example, Clang -O2 always returns 1 when this function is inlined:
static inline unsigned long get_ip(void)
{ return ({ __label__ __here; __here: (unsigned long)&&__here; }); }
Fix it by overriding _THIS_IP_ in <asm/linkage.h> (which is included by
<linux/instruction_pointer.h>) using an architecture-specific inline asm
version. Additionally, avoiding taking the address of a label prevents
compilers from emitting spurious indirect branch targets (e.g. ENDBR or
BTI) under control-flow integrity schemes.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=120071 [1]
Link: https://github.com/llvm/llvm-project/issues/138272 [2]
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add Simon Schuster as a co-maintainer for the nios2 architecture and
mark it as supported.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fixup clash of:
552636b931 ("perf trace: Add beautifier script for fsmount flags")
That went via Namhyung upstream and the following ones in the
perf-tools-next tree:
32969ef6e3 ("perf build: Pre-generate BPF skeleton tooling during umbrella prepare phase")
537609924c ("perf trace beauty: Make beauty generated C code standalone .o files")
This complements f8d0db39bc ("perf build: Fix fsmount.o build")
sent by Ian Rogers.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID
and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved
from the parent directory.
Cc: stable@vger.kernel.org
Signed-off-by: Junyi Liu <moss80199@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path.
Fixes: 1baff47b81 ("ksmbd: fix use-after-free in smb2_open during durable reconnect")
Signed-off-by: Junyi Liu <moss80199@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently this binding only lists i2s and dsp_b formats that are used
by existing sound cards. However, DT bindings should describe the full
hardware capabilities rather than only the formats of current usage.
The SAI audio controller of i.MX audio sound card supports multiple DAI
formats, including:
- i2s
- left_j
- right_j
- dsp_a
- dsp_b
- pdm
- msb
- lsb
Complete the full list of formats supported by i.MX audio sound card to
ensure the binding correctly describes hardware.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260331012450.1298115-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
8 and 32 bit formats can have different types, print them in debug
information to have complete view of the supported formats.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520150204.18303-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald <rf@opensource.cirrus.com> says:
This series replaces the entirely custom SoundWire regmap with the generic
regmap-sdw. The reasons for doing this are:
- Avoid code duplication
- Avoid effort of keeping custom implementation up-to-date
- Prepare for supporting BRA
Link: https://patch.msgid.link/20260521115420.978616-1-rf@opensource.cirrus.com
Use the regmap_sdw implementation for SoundWire instead of
re-implementing the low-level bus transactions in cs35l56-sdw.c
The cs35l56 registers are big-endian on I2C and SPI but little-endian
over SoundWire. The firmware files are all big-endian and contain opaque
blobs in big-endian order. So these must be endian-swapped to transfer
over SoundWire. A custom regmap bus implementation is used to do this
endian-swapping.
The original implementation of this custom regmap bus was a complete bus
backend, performing the endian swapping and low-level SoundWire bus
read/write.
This commit changes the custom regmap bus to only perform the endian-swap.
It uses an underlying simple uncached regmap_sdw bus to deal with
transferring the 32-bit registers over the SoundWire bus. Although this
adds a small amount of overhead, from passing through the regmap APIs
twice, it avoids having a local duplicate implementation of what regmap_sdw
already does.
The slow-read handling for OTP registers must access 8-bit SoundWire
registers so it still uses low-level SoundWire bus reads.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260521115420.978616-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the reg_base member of regmap_config for SoundWire so that
the regmap core will apply the 0x8000 offset to addresses, instead
of doing it within our low-level regmap read/write callbacks.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260521115420.978616-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Subtract the value of cs35l56 regmap_config->reg_base from addresses
passed into the mock regmap bus.
Chip register addresses transferred over SoundWire are offset by 0x8000
to move them after the address range reserved in the SoundWire spec.
This commit prepares for changing the cs35l56-sdw driver to use
regmap_config->reg_base to add this offset. When that is done the
addresses passed into the mock regmap_bus will include this offset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260521115420.978616-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
The USB Audio Offload (UAOL) can only be used from the DSP side and
on Lunar Lake (ACE2) and newer platforms the access to it's register
space must be granted by the host, just like for SSP or DMIC.
This series enable the offload for UAOL for LNL or newer devices.
Link: https://patch.msgid.link/20260520150639.25301-1-peter.ujfalusi@linux.intel.com
The handling of UAOL (USB Audio Offload Link) is similar to SSP and DMIC,
it is handled by the DSP firmware.
Set the offload enable for it similar to SSP and DMIC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260520150639.25301-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdac_bus_eml_enable_offload() can only fail in case the IP is not enabled
in the platform, which is not really an error as the ACE IP can be
configured differently when integrated into a specific SoC.
While it is unlikely, but it is a valid configuration that for example the
DMIC is disabled.
In this case we will just skip setting the offload for a link that is not
present.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260520150639.25301-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda <Vijendar.Mukunda@amd.com> says:
This series adds initial AMD ACP 7.x support for ACP7.D / 7.E / 7.F
platforms.
Compared to earlier ACP generations, ACP7.x includes substantial design
changes, including an updated register set/layout. For that reason,
the ACP7.x implementation is placed under a separate sound/soc/amd/acp7x/
directory instead of extending older-generation code paths,
keeping ACP7.x-specific logic and register definitions cleanly separated
and easier to maintain.
This initial version is intentionally focused on the core PCI driver
bring-up: register definitions, probe/remove, basic helper wiring, and
system sleep + runtime PM integration. A follow-up series will add support
for additional Audio I/O blocks, including SoundWire and the ACP PDM
controller.
The primary goal of this series is to unblock power validation, since the
ACP IP currently does not have a driver available with PM ops support on
these platforms.
Link: https://patch.msgid.link/20260507181251.20594-1-Vijendar.Mukunda@amd.com
Add ACP7.x PM callbacks and hook up system sleep and runtime PM ops for
the PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260507181251.20594-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP7.x drivers can be built by selecting necessary
kernel config option.
The patch enables build support of the same.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260507181251.20594-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ACP7.x init/deinit helper routines and wire up PCI hw ops for
ACP7.D/7.E/7.F variants.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260507181251.20594-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
-----BEGIN PGP SIGNATURE-----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=XLqG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The eDP PHY nodes on lemans were missing the reference clock voting.
This initially went unnoticed because the clock was implicitly enabled
by the UFS PHY driver, and the eDP PHY happened to rely on that.
After commit 77d2fa54a9 ("scsi: ufs: qcom : Refactor phy_power_on/off
calls"), the UFS driver no longer keeps the reference clock enabled.
As a result, the eDP PHY fails to power on.
To fix this, add eDP reference clock for eDP PHYs on lemans chipset
ensuring reference clock is enabled.
Fixes: e1e3e5673f ("arm64: dts: qcom: sa8775p: add DisplayPort device nodes")
Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260128114853.2543416-3-quic_riteshk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
