Vishal reported that KVM unit test 'x2apic' started failing after commit
0e98eb1481 ("entry: Prepare for deferred hrtimer rearming").
The reason is that KVM/VMX is injecting interrupts while it has interrupts
disabled, for a context that will enable interrupts, this means that
regs->flags.X86_EFLAGS_IF == 0 and irqentry_exit() will not do the right
thing.
Notably, irqentry_exit() must not call hrtimer_rearm_deferred() when the return
context does not have IF set, because this will cause problems vs NMIs.
Therefore, fix up the state after the injection.
Fixes: 0e98eb1481 ("entry: Prepare for deferred hrtimer rearming")
Reported-by: "Verma, Vishal L" <vishal.l.verma@intel.com>
Suggested-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: "Verma, Vishal L" <vishal.l.verma@intel.com>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260423155936.957351833@infradead.org
Closes: https://lore.kernel.org/r/70cd3e97fbb796e2eb2ff8cd4b7614ada05a5f24.camel%40intel.com
Move the VMX interrupt dispatch magic into the x86 core code. This
isolates KVM from the FRED/IDT decisions and reduces the amount of
EXPORT_SYMBOL_FOR_KVM().
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: "Verma, Vishal L" <vishal.l.verma@intel.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linxu.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260508091829.GO3126523@noisy.programming.kicks-ass.net
The macro HAS_DMC_WAKELOCK() is currently only used inside
intel_dmc_wl.c and doesn't need to be exposed to the rest of the driver.
Furthermore, there is a distinction between the display IP having
support for the feature and the driver actually using it, so using
HAS_DMC_WAKELOCK() outside of intel_dmc_wl.c would potentially be wrong
anyway.
Let's drop that macro. If other part of the driver needs to check if
the driver is using the DMC wakelock feature, we would need actually to
expose the function __intel_dmc_wl_supported().
Since HAS_DMC_WAKELOCK() was kind of self-documenting in the sense that
it tells us what display IPs have support for the feature and we are now
dropping it, let's also take this opportunity to add a documentation
note on the subject.
Reviewed-by: Daniel Charles <daniel.charles@intel.com>
Link: https://patch.msgid.link/20260429-drop-has_dmc_wakelock-v1-1-62cb6fab1da0@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Support tianma,tm050rdh03 DPI panel on i.MX93 9x9 QSB.
Move the common parts from imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso into
imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi for reuse by the tm050rdh03
overlay file.
The panel connects with the QSB board through an adapter board[1]
designed by NXP.
Link: https://www.nxp.com/design/design-center/development-boards-and-designs/parallel-lcd-display:TM050RDH03-41 [1]
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Some i.MX boards (i.MX8MP EVK and i.MX95-15x15 EVK) have M.2 connectors
that are physically wired to both USDHC and PCIe controllers. The
default device tree enables USDHC for SDIO WiFi modules and disables
PCIe to avoid regulator conflicts.
Add a common imx-m2-pcie.dtso that can be applied to enable PCIe and
disable USDHC when a PCIe module is installed in the M.2 connector.
This creates the following DTB files:
- imx8mp-evk-pcie.dtb: i.MX8MP EVK with PCIe enabled
- imx95-15x15-evk-pcie.dtb: i.MX95-15x15 EVK with PCIe enabled
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Disable the PCIe bus in the default device tree to avoid shared
regulator conflicts between SDIO and PCIe buses. The non-deterministic
probe order between these two buses can break the PCIe initialization
sequence, causing PCIe devices to fail detection intermittently.
On i.MX95-15x15 EVK board, the M.2 connector is physically wired to both
USDHC3 and PCIe0, however the out-of-box module is SDIO IW612 WiFi, so
enable SDIO WiFi in the default imx95-15x15-evk.dts.
Add 'm2_usdhc' label to USDHC3 to support device tree overlay for PCIe
modules. Users who need PCIe can use imx95-15x15-evk-pcie.dtb (added in
a follow-up patch) which applies an overlay to enable PCIe and disable
USDHC3.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Disable the PCIe bus in the default device tree to avoid shared
regulator conflicts between SDIO and PCIe buses. The non-deterministic
probe order between these two buses can break the PCIe initialization
sequence, causing PCIe devices to fail detection intermittently.
On i.MX8MP EVK board, the M.2 connector is physically wired to both
USDHC1 and PCIe0, however the out-of-box module is SDIO IW612 WiFi, so
enable the SDIO WiFi in the default imx8mp-evk.dts.
Add 'm2_usdhc' label to USDHC1 to support device tree overlay for PCIe
modules. Users who need PCIe can use imx8mp-evk-pcie.dtb (added in a
follow-up patch) which applies an overlay to enable PCIe and disable
USDHC1.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Sort the Makefile entries alphabetically. No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Fix the RS485 functionality, the RS485 RTS signal is active high on Ivy.
Fixes: f33a1f9a94 ("arm64: dts: freescale: imx95-verdin: Add Ivy carrier board")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add Zinnia Carrier Board mated with Verdin iMX95.
It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
2 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Some carrier board reuse the UART_2 control signals as GPIO, split
the pinctrl RTS/CTS in separated nodes to maximize flexibility.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add Zinnia Carrier Board mated with Verdin iMX8M Plus.
It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
2 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Some carrier board reuse the UART_2 control signals as GPIO, split
the pinctrl RTS/CTS in separated nodes to maximize flexibility.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add Zinnia Carrier Board mated with Verdin iMX8M Mini.
It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
1 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Some carrier board reuse the UART_2 control signals as GPIO, split
the pinctrl RTS/CTS in separated nodes to maximize flexibility.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add Toradex Verdin Zinnia carrier board mated with Verdin
iMX8M Plus, Verdin iMX8M Mini and Verdin iMX95.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
IRQ_TYPE_xxx flags are not correct in the context of GPIO flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: IRQ_TYPE_EDGE_FALLING = 2 = GPIO_SINGLE_ENDED.
Correct the Type-C int-gpios to use proper flags, assuming the author of
the code wanted similar logical behavior:
IRQ_TYPE_EDGE_FALLING => GPIO_ACTIVE_LOW
Fixes: c4b4593ecb ("arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
FFA_PARTITION_INFO_GET_REGS reports the size of each partition
information descriptor in x2[63:48]. However, __ffa_partition_info_get_regs()
walks the returned register payload with a hardcoded 24-byte stride
(regs += 3), even though the size is already read into buf_sz.
That works for the FF-A v1.1/v1.2 24-byte descriptor layout, where each
descriptor consumes three registers. Newer FF-A revisions can extend the
descriptor while keeping the existing fields at the front. For example, a
48-byte descriptor consumes six registers, so advancing by only three
registers desynchronises the parser and can make it read subsequent entries
from the middle of a descriptor.
Use the advertised descriptor size to derive the register stride. Validate
that the size is register-aligned, large enough for the fields parsed by the
driver, and that the requested number of descriptors fits in the returned
x3..x17 register window. The driver still copies only the fields it
understands, but now skips over any trailing descriptor fields correctly.
Fixes: ba85c644ac ("firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS")
Suggested-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Jamie Nguyen <jamien@nvidia.com>
Link: https://patch.msgid.link/20260518203116.42624-1-jamien@nvidia.com
(sudeep.holla: Minor rewordng of the commit message and subject)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
bio_integrity_verify() expects the passed struct bvec_iter to be an
iterator over bio data, not integrity. So construct a separate data
bvec_iter without the bio_integrity_bytes() conversion and pass it to
bio_integrity_verify() instead of bip_iter.
Fixes: 0bde8a12b5 ("block: add fs_bio_integrity helpers")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260513182924.1753582-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Message-ID: <20260519150156.1590826-2-u.kleine-koenig@baylibre.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Just like it is done for the platform-specific bandwidth parameters, use
a separate function named get_display_bw_params() to return the display
IP-specific parameters. This simplifies intel_bw_init_hw() by having
just one call for each of the *_get_bw_info() functions.
v2:
- Prefer to call get_display_bw_params() only once in
intel_bw_init_hw() instead of having multiple calls in each of the
affected *_get_bw_info() functions. (Jani)
v3:
- Call get_display_bw_params() only after the check on
HAS_DISPLAY(display). (Jani)
- Return &gen11_bw_params only if display version is 11. (Matt)
v4:
- Like done with get_soc_bw_params(), drop drm_WARN() when no display
IP is matched.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260518-separate-platform-from-diplay-ip-specific-bw-params-v4-5-918528006549@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
To align with struct intel_platform_bw_params, rename struct
intel_sa_info to intel_display_bw_params. Also add comments to contrast
their purposes.
v2:
- Use gen11 and gen12 as prefixes for ICL's and TGL's display-specific
parameters variables. (Matt)
- Prefer to use "display" instead of "disp" in variable names. (Jani)
- Drop the redundant "disp" from the variable names.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260518-separate-platform-from-diplay-ip-specific-bw-params-v4-4-918528006549@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Now that intel_sa_info contains bandwidth parameters specific to the
display IP, we can drop many duplicates and reuse from previous
releases.
Let's do that and also simplify intel_bw_init_hw() while at it.
v2:
- Drop rkl_sa_info and reuse icl_sa_info. (Matt)
- Add comment explaining RKL's display's peculiarity on using ICL's
parameters. (Matt)
- Don't rename xelpdp_sa_info to mtl_sa_info. Renaming of instances
to use IP names will be done in upcoming changes.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260518-separate-platform-from-diplay-ip-specific-bw-params-v4-3-918528006549@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
We got confirmation from the hardware team that the bandwidth parameters
deprogbwlimit and derating are platform-specific and not tied to the
display IP. As such, let's make sure that we use platform checks for
those.
The rest of the members of struct intel_sa_info are tied to the display
IP and we will deal with them as a follow-up.
v2:
- Use good old if-ladder instead of weird-looking pattern "assign ret,
check platform, then return ret". (Jani, Matt)
- Have a single call site for get_platform_bw_params() and pass the
result as parameter to the *_get_bw_info() functions. (Jani)
- Avoid using "plat" as abbreviation for "platform". (Jani)
- s/_plat_bw_params/_bw_params/, since all of the instances are
prefixed with platform names. (Jani)
- s/struct intel_platform_bw_params/struct intel_soc_bw_params/.
(Matt)
- Do not return a default value; prefer to return NULL and
intentionally cause a NULL pointer dereference if a platform is
missing. (Gustavo)
v3:
- Call get_soc_bw_params() only after the check on
HAS_DISPLAY(display). (Jani)
- Combine if-ladder branches for adl_s_bw_params into a single one.
(Matt)
- Flatten if-ladder by checking for WCL before PTL (as opposed to
checking for WCL inside the brace for PTL). (Matt)
- Bail out of intel_bw_init_hw() if display version is below 11.
(Gustavo)
v4:
- Drop drm_WARN() when no platform was matched to avoid
special-casing DG2 and any other platform that doesn't use
SoC-specific parameters. (Jani)
- Pass dram_info to get_soc_bw_params() to keep a single call to
intel_dram_info(). (Jani)
- Don't use 2 separate if-ladders (one for client and another for
discrete platforms) and keep a single one for simplicity. (Gustavo)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260518-separate-platform-from-diplay-ip-specific-bw-params-v4-2-918528006549@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the drivers already have this correctly placed, so adjust
the missing ones. No functional impact.
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514060525.9253-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the GPI DMA engine found on the Eliza SoC.
It is fully compatible with the GPI DMA engine found on SM6350,
thus using qcom,sm6350-gpi-dma as fallback compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://patch.msgid.link/20260515-eliza-gpi-dma-v2-1-1255b43d5ca9@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SpacemiT K3 reuses most of the PDMA IP design found on K1, with one
difference being the extended DRCMR base address. Add "spacemit,k3-pdma"
compatible string and define a new mmp_pdma_ops for K3 PDMA.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260518-k3-pdma-v6-3-67fdf319a8f8@linux.spacemit.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refactor the DRCMR macro into a helper function mmp_pdma_get_drcmr()
to support variable extended DRCMR base addresses across different PDMA
implementations, such as SpacemiT K3.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260518-k3-pdma-v6-2-67fdf319a8f8@linux.spacemit.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the "spacemit,k3-pdma" compatible string for the SpacemiT K3 SoC.
While the K3 PDMA IP reuses most of the design found on the earlier
K1 SoC, a new compatible string is required because the DRCMR
(DMA Request/Command Register) base address for extended DMA request
numbers (>= 64) differs from the K1 implementation.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260518-k3-pdma-v6-1-67fdf319a8f8@linux.spacemit.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add debugfs support to simulate incumbent signal interference from the
host for testing purposes. The debugfs entry is created only for 6 GHz
radio when firmware advertises the support through
WMI_TLV_SERVICE_DCS_INCUMBENT_SIGNAL_INTERFERENCE_SUPPORT flag.
Debugfs command:
echo <interference_bitmap> > /sys/kernel/debug/ath12k/pci-000X/macX/simulate_incumbent_signal_interference
Each bit in the interference_bitmap represents a 20 MHz segment. Bit 0
corresponds to the primary 20 MHz segment, regardless of its position
within the operating bandwidth. Bit 1 represents the next adjacent 20 MHz
segment, bit 2 the lower 20 MHz segment of the adjacent 40 MHz segment,
and so on-progressing sequentially across the bandwidth..
Example:
echo 0xF0 > /sys/kernel/debug/ath12k/pci-0002:01:00.0/mac0/simulate_incumbent_signal_interference
This indicates that all the subchannels in the secondary 80 MHz segment
were affected.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Signed-off-by: Amith A <amith.a@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511040242.1351792-3-amith.a@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The Hawi GPI DMA engine follows the same programming model and
register interface as previous generation of Qualcomm SoCs like
kaanapali, glymur, and is fully compatible with earlier GPI DMA
implementations.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401124028.589931-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When incumbent signal interference is detected by an AP/mesh interface
operating in the 6 GHz band, as mandated by the FCC, it is expected to
vacate the affected channels. The firmware indicates the interference to
the host using the WMI_DCS_INTERFERENCE_EVENT.
To handle the new WMI event, first parse it to retrieve the interference
information. Next, validate the interference-detected channel and
the interference bitmap. The interference bitmap received from the
firmware uses a mapping where bit 0 corresponds to the primary
20 MHz segment, regardless of its position within the operating
bandwidth. Bit 1 represents the next adjacent 20 MHz segment, bit 2
the lower 20 MHz segment of the adjacent 40 MHz segment, and so
on, progressing sequentially across the bandwidth. However, for userspace
consumption via mac80211, this bitmap must be transformed into a
standardized format such that each bit position directly maps to the
corresponding sub-channel index within the operating bandwidth.
Finally, indicate the transformed interference bitmap to mac80211, which
then notifies userspace of the interference. Once the incumbent signal
interference is detected, firmware suspends TX internally on the affected
operating channel while userspace decides the mitigation action. Userspace
is expected to trigger a channel switch or bandwidth reduction to mitigate
the interference. Also, add a flag handling_in_progress to indicate that
handling of interference is in progress. Set it to true after
indicating to mac80211 about the interference. Reset the flag to false
after the operating channel is switched by userspace. This prevents
processing any further interference events when there is already a
previous event being handled. Hence, further events are processed only
after a channel switch request is received from userspace for the
previous event.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Co-developed-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Amith A <amith.a@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511040242.1351792-2-amith.a@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Document compatible string for bam v2.0.0 version found on kaanapali.
BAM v2.0.0 differs from the earlier v1.7.X revision in terms of register
layout and offsets, requiring a distinct compatible for correct hardware
description.
Also add a new example for BAM v2.0.0 to illustrate a more complete
configuration than the existing v1.4 example. The new example covers
64-bit address and size cells, IOMMU bindings and execution
environment–related properties required on newer platforms.
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514-knp_qce-v2-1-890e3372eef8@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260507131439.264906-1-marco.crivellari@suse.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TmyE
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix two null pointer dereferences and a memory leak
* tag 'v7.1-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix null pointer dereference in compare_guid_key()
ksmbd: fix null pointer dereference in proc_show_files()
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
- Check the index depth limit via ntfs_icx_parent_inc(), avoiding context
corruption from excessively deep child chains.
- Switch security descriptor allocation to kzalloc() to avoid leaking
uninitialized memory.
- Prevent an inconsistent state where vol->volume_label becomes NULL on
allocation failure.
- Validate MFT records by verifying that attrs_offset sits within
bytes_in_use.
- Fix an off-by-one boundary comparison, correctly catching the
out-of-range MFT record number
- Validate the attribute name offset and length bounds prior to AT_UNUSED
enumeration.
- Check for a valid left neighbor before runlist merges to prevent an
8byte out-of-bounds write on crafted volumes.
- Add the missing record comparison against $MFTMirr during mount.
- Fix wrong inode lookup when writing extent MFT records.
- Redirty folio on memory allocation failure in ntfs_write_mft_block().
- Capture and propagate $MFTMirr sync errors during writeback.
- Ensure MFT mirror and synchronous writes wait for I/O completion.
- Fix buffer overflow/heap over-read in ntfs_bdev_write() when cluster
size is smaller than PAGE_SIZE.
- Fix use-after-free in ntfs_inode_sync_filename() when parent index inode
is evicted while still holding its mrec_lock.
- Update resident attribute length validation to match $AttrDef.
- Fix refcount underflow and UAF of the global upcase table.
- Fix two smatch warnings.
-----BEGIN PGP SIGNATURE-----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=NZAT
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs fixes from Namjae Jeon:
- Check the index depth limit via ntfs_icx_parent_inc(), avoiding
context corruption from excessively deep child chains
- Switch security descriptor allocation to kzalloc() to avoid leaking
uninitialized memory
- Prevent an inconsistent state where vol->volume_label becomes NULL on
allocation failure
- Validate MFT records by verifying that attrs_offset sits within
bytes_in_use
- Fix an off-by-one boundary comparison, correctly catching the
out-of-range MFT record number
- Validate the attribute name offset and length bounds prior to
AT_UNUSED enumeration
- Check for a valid left neighbor before runlist merges to prevent an
8byte out-of-bounds write on crafted volumes
- Add the missing record comparison against $MFTMirr during mount
- Fix wrong inode lookup when writing extent MFT records
- Redirty folio on memory allocation failure in ntfs_write_mft_block()
- Capture and propagate $MFTMirr sync errors during writeback
- Ensure MFT mirror and synchronous writes wait for I/O completion
- Fix buffer overflow/heap over-read in ntfs_bdev_write() when cluster
size is smaller than PAGE_SIZE
- Fix use-after-free in ntfs_inode_sync_filename() when parent index
inode is evicted while still holding its mrec_lock
- Update resident attribute length validation to match $AttrDef
- Fix refcount underflow and UAF of the global upcase table
- Fix two smatch warnings
* tag 'ntfs-for-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: restore $MFT mirror contents check
ntfs: fix empty_buf and ra lifetime bugs in ntfs_empty_logfile()
ntfs: validate attribute name bounds before returning it
ntfs: fix MFT bitmap scan 2^32 boundary check
ntfs: validate MFT attrs_offset against bytes_in_use
ntfs: fix missing kstrdup() error check in ntfs_write_volume_label()
ntfs: avoid leaking uninitialised bytes in new security descriptors
ntfs: fix out-of-bounds write in ntfs_index_walk_down()
ntfs: fix out-of-bounds write in ntfs_rl_collapse_range() merge path
ntfs: fix variable dereferenced before check ni in ntfs_attr_open()
ntfs: fix default_upcase refcount underflow and UAF on fs_context teardown
ntfs: match ntfs_resident_attr_min_value_length with $AttrDef
ntfs: avoid use-after-free of index inode in ntfs_inode_sync_filename()
ntfs: fix copy length in ntfs_bdev_write() for non-page-aligned start
ntfs: wait for sync mft writes to complete
ntfs: capture mft mirror sync errors in ntfs_write_mft_block()
ntfs: redirty folio when ntfs_write_mft_block() runs out of memory
ntfs: use base mft_no when looking up base inode for extent record
ntfs: fix variable dereferenced before check ni and attr in ntfs_attrlist_entry_add()
- modpost: prevent stack buffer overflow in do_input_entry() and do_dmi_entry()
Defensively replace unbound sprintf() calls in file2alias to prevent
silent stack overflows and detect alias name overflows with proper
error message.
- kbuild: pacman-pkg: make "rc" releases adhere to pacman versioning scheme
Enable smooth upgrades from "rc" releases w/ pacman packages.
Cc: Hasan Basbunar <basbunarhasan@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
-----BEGIN PGP SIGNATURE-----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=4PGV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- modpost: prevent stack buffer overflow in do_input_entry() and
do_dmi_entry()
Defensively replace unbound sprintf() calls in file2alias to prevent
silent stack overflows and detect alias name overflows with proper
error message.
- kbuild: pacman-pkg: make "rc" releases adhere to pacman versioning
scheme
Enable smooth upgrades from "rc" releases w/ pacman packages.
* tag 'kbuild-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: pacman-pkg: make "rc" releases adhere to pacman versioning scheme
modpost: prevent stack buffer overflow in do_input_entry() and do_dmi_entry()
Modern systems may have more than 16 PPS sources and current hard-coded
limit breaks registration of some devices. Let's bump the limit to 256
in hope it will be enough in foreseen future.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://patch.msgid.link/20260515135028.2021318-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Well mostly the same issues the other code had as well:
1. Memory allocation while holding the userq_mutex lock is forbidden!
2. Things were created/started/published in the wrong order.
3. The reset lock was taken in the wrong order and seems to be
unecessary in the first place.
4. Error messages on invalid input parameters can spam the logs.
5. Error messages on memory allocation failures are usually superflous
as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89e50de565)
In handle_read_data() the encrypted/folioq branch
(buf_len <= data_offset, reached via receive_encrypted_read for
transform PDUs > CIFSMaxBufSize + MAX_HEADER_SIZE) copies the READ
payload using buffer_len rather than data_len:
rdata->result = cifs_copy_folioq_to_iter(buffer, buffer_len,
cur_off,
&rdata->subreq.io_iter);
...
rdata->got_bytes = buffer_len;
buffer_len comes from the SMB3 transform header OriginalMessageSize
field (OriginalMessageSize - read_rsp_size); it represents the size
of the decrypted message after the SMB2 header. data_len comes from
the SMB2 READ response DataLength field; it represents the actual
READ payload size and may be smaller than buffer_len when the
decrypted message contains padding or other trailing bytes after the
READ payload. The existing check `data_len > buffer_len - pad_len`
only enforces an upper bound, so a server that emits
OriginalMessageSize larger than read_rsp_size + pad_len + data_len
passes the check and the kernel copies buffer_len bytes per response,
ignoring the server-asserted DataLength.
Two observable failures with a crafted server (DataLength=4,
buffer_len=20000):
- the kernel returns 20000 bytes per sub-request to userspace and
sets got_bytes = buffer_len, even though the response claimed
only 4 bytes of payload;
- on a partial netfs sub-request whose iterator is sized to
data_len, the over-large copy_folio_to_iter() short-reads,
cifs_copy_folioq_to_iter() returns -EIO via the n != len path,
and the entire netfs read collapses to -EIO even though the
leading sub-requests succeeded.
Use data_len for the copy length and for got_bytes so the kernel
honours the server-asserted READ payload size. For well-formed
servers (where buffer_len == pad_len + data_len) the change is
behaviour-equivalent.
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Erazo <mendozayt13@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
'evergreen_surface_check' is called with a NULL warning prefix when
handling potentially recoverable issues or just to compute the alignment
requirements, and 'evergreen_surface_check' is called again in case of
failure (with the correct prefix, as opposed to NULL), therefore, the
initial check must not print a warning, because the surface may be
accepted successfully after having been corrected, however if it isn't,
the final check will print the warning anyway. The surface check
functions specific to array modes already implement this behavior, but
the 'evergreen_surface_check' function itself doesn't.
This is also supposed to fix the "'%s' directive argument is null
[-Werror=format-overflow=]" compiler warning.
Fixes: 285484e2d5 ("drm/radeon: add support for evergreen/ni tiling informations v11")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vitaliy Triang3l Kuzmin <ml@triang3l.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e20ea411c9)
Multiple queues needs these bo_va objects belonging to
the same uq_mgr. So once they are mapped lets not unmap
them as at any point of time any of the queues might be
using it.
Also userq_va_mapped should be a boolean than atomic.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c02889ea2)
The original addition operation in 64-bit unsigned type may encounter
overflow situations. To prevent such issues and safely reject invalid
inputs, the check_add_overflow() function is used.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc768f4dd0)
