The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
Fixes: c63aed7334 ("PCI: altera: Use pci_host_probe() to register host")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-3-mahesh.vaidya@altera.com
altera_pcie_irq_teardown() calls irq_dispose_mapping() on pcie->irq.
However, pcie->irq is the parent IRQ returned by platform_get_irq(), not
the mapping created by Altera INTx irq_domain.
The Altera driver only sets the chained handler on the parent IRQ. It
should detach that handler during teardown, but it should not dispose the
parent IRQ mapping, which belongs to the parent interrupt controller's
irq_domain.
Drop irq_dispose_mapping(pcie->irq) from the teardown path.
Note that during irqchip remove(), the child IRQs should've disposed. But
since the chained handler itself is removed, there is no way the stale
child IRQs (if exists) could fire. So it is safe here.
Fixes: ec15c4d0d5 ("PCI: altera: Allow building as module")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: added a note about IRQ disposal]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-2-mahesh.vaidya@altera.com
The series starts with patches to allow the vfs to ignore certain types
of events on directories. nfsd can then request these sorts of
delegations on directories, and then set up inotify watches on the
directory to trigger sending CB_NOTIFY events.
* patches from https://patch.msgid.link/20260428-dir-deleg-v3-0-5a0780ba9def@kernel.org:
fsnotify: add FSNOTIFY_EVENT_RENAME data type
fsnotify: add fsnotify_modify_mark_mask()
fsnotify: new tracepoint in fsnotify()
filelock: add an inode_lease_ignore_mask helper
filelock: add a tracepoint to start of break_lease()
filelock: add support for ignoring deleg breaks for dir change events
filelock: pass current blocking lease to trace_break_lease_block() rather than "new_fl"
Link: https://patch.msgid.link/20260428-dir-deleg-v3-0-5a0780ba9def@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new fsnotify_rename_data struct and FSNOTIFY_EVENT_RENAME data
type that carries both the moved dentry and the inode that was
overwritten by the rename (if any).
Update fsnotify_data_inode(), fsnotify_data_dentry(), and
fsnotify_data_sb() to handle the new type, and add a new
fsnotify_data_rename_target() helper for extracting the overwritten
target inode.
Update fsnotify_move() to use the new data type for FS_RENAME and
FS_MOVED_TO events, passing the overwritten target inode through the
event data. FS_MOVED_FROM is unchanged since the source directory
doesn't need overwrite information.
This is done so that fsnotify consumers like nfsd can atomically
observe the overwritten file when a rename replaces an existing entry,
without needing a separate FS_DELETE event.
Assisted-by: Claude (Anthropic Claude Code)
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-7-5a0780ba9def@kernel.org
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
nfsd needs to be able to modify the mask on an existing mark when new
directory delegations are set or unset. Add an exported function that
allows the caller to set and clear bits in the mark->mask, and does
the recalculation if something changed.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-6-5a0780ba9def@kernel.org
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a tracepoint so we can see exactly how this is being called.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-5-5a0780ba9def@kernel.org
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Same race shape as the rmdir path that 93618edf75 ("cgroup: Defer css
percpu_ref kill on rmdir until cgroup is depopulated") fixed: a task past
exit_signals() whose cset subsys[ssid] still pins the disabled controller's
css can be touching subsys state while ->css_offline() runs. The earlier
patches in this series built up the per-subsys-css deferral machinery and
routed cgroup_destroy_locked() through it. Apply the same shape to
cgroup_apply_control_disable():
kill_css_sync(css);
if (!css_is_populated(css))
kill_css_finish(css);
When the dying css is still populated, kill_css_finish() is deferred. The
walker in css_update_populated() fires kill_finish_work once the css's
hierarchical populated count drops to zero.
cgroup_lock_and_drain_offline()'s wait predicate switches from
percpu_ref_is_dying() to css_is_dying(). CSS_DYING is set by kill_css_sync()
and is a strict superset of percpu_ref_is_dying. Without this change, a +cpu
re-enable after a deferred -cpu disable would skip the drain (percpu_ref
isn't killed yet) and observe the still-CSS_DYING css through cgroup_css(),
treating it as live.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a new routine that returns a mask of all dir change events that are
currently ignored by any leases. nfsd will use this to determine how to
configure the fsnotify_mark mask.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-4-5a0780ba9def@kernel.org
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
...mostly to show the LEASE_BREAK_* flags.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-3-5a0780ba9def@kernel.org
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a NFS client requests a directory delegation with a notification
bitmask covering directory change events, the server shouldn't recall
the delegation. Instead the client will be notified of the change after
the fact.
Add support for ignoring lease breaks on directory changes. Add a new
flags parameter to try_break_deleg() and teach __break_lease how to
ignore certain types of delegation break events.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-2-5a0780ba9def@kernel.org
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The break_lease_block tracepoint currently just shows the type of
"new_fl", which we can predict from the "flags" value. Switch it to
display info about "fl" instead, as that's the file_lease on which the
code is blocking.
For trace_break_lease_unblock(), pass it a NULL pointer. "fl" may have
been freed by that point, and passing it the info in new_fl is
deceptive.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260428-dir-deleg-v3-1-5a0780ba9def@kernel.org
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
93618edf75 ("cgroup: Defer css percpu_ref kill on rmdir until cgroup is
depopulated") deferred kill_css_finish() at the cgroup level: rmdir waits
for the entire cgroup's populated count to drop to zero, then fires
kill_css_finish() on every subsystem css at once. Replace that with
per-subsys-css deferral. Each subsystem css now tracks its own hierarchical
populated count and independently defers its kill_css_finish() until its own
subtree drains.
The rmdir-race fix carries through unchanged in shape. The dying css's
->css_offline() still waits until no PF_EXITING task references it, and v2's
cgroup-level machinery goes away.
cgroup_apply_control_disable() has the same race shape (PF_EXITING tasks
pinning a css whose ->css_offline() is about to run) and stays synchronous
here. This patch lays the groundwork for fixing it - per-cgroup waiting
can't gate one subsys css being killed while the rest of the cgroup stays
live, but per-css can.
Subtree-wide invariant preserved: a dying ancestor css stays populated
through nr_populated_children until every dying descendant's task drains, so
the walker fires the ancestor's kill_finish_work only after all descendants
have drained.
Add paired smp_mb()s in kill_css_sync() and css_update_populated() to fence
the StoreLoad on (CSS_DYING, populated counter), guaranteeing that either
the walker queues kill_finish_work or the caller fires synchronously.
cgroup_destroy_locked() was implicitly fenced by an unrelated css_set_lock
pair; cgroup_apply_control_disable() in the next patch is not.
Signed-off-by: Tejun Heo <tj@kernel.org>
Later patches replace the cgroup-level finish_destroy_work deferral added
by 93618edf75 ("cgroup: Defer css percpu_ref kill on rmdir until cgroup
is depopulated") with a per-subsys-css deferral. That needs each subsystem
css to track its own populated count. Move the populated counters from
cgroup onto cgroup_subsys_state. cgroup->self is itself a
cgroup_subsys_state and self.parent walks the same chain as cgroup_parent(),
so cgroup_update_populated() generalizes to a single css_update_populated()
taking a css. The cgroup-side bookkeeping runs only when the walk started
from a self css.
Keep nr_populated_{domain,threaded}_children on cgroup. Both sum to
self.nr_populated_children, but staying as dedicated fields to allow readers
like cgroup_can_be_thread_root() unlocked access.
css_set_update_populated() also walks the per-subsys-css chain so each
subsystem css's hierarchical populated count is maintained. No reader
consumes those counts yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_update_populated() updates nr_populated_csets,
nr_populated_domain_children, and nr_populated_threaded_children under
css_set_lock, but cgroup_has_tasks(), cgroup_is_populated(), and
cgroup_can_be_thread_root() read them without holding it. Use
READ_ONCE/WRITE_ONCE.
Signed-off-by: Tejun Heo <tj@kernel.org>
cpuset reads cs->css.cgroup->nr_populated_csets directly in two places to
test whether a cgroup has tasks. cgroup.c already has a matching helper,
cgroup_has_tasks(). Move it to cgroup.h as static inline and use that
instead. This is to prepare for relocation of cgroup->nr_populated_csets. No
semantic change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove the redundant mode field from struct keembay_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-5-18255117159@163.com
Remove the redundant mode field from struct dw_plat_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-4-18255117159@163.com
Remove the redundant mode field from struct artpec6_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-3-18255117159@163.com
Remove the redundant mode field from struct dra7xx_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-2-18255117159@163.com
For two reasons:
1) An opcode cannot block inside io_uring_enter() doing submissions, as
it'll stall the submission side pipeline.
2) Ending up in sb_start_write() -> __sb_start_write() ->
percpu_down_read_freezable() introduces a new lockdep edge, which it
correctly complains about.
Check if the socket type is AF_UNIX and has a non-empty pathname. If it
does, mark it REQ_F_FORCE_ASYNC to punt the submission to io-wq rather
than attempt to do it inline.
Fixes: 7481fd93fa ("io_uring: Introduce IORING_OP_BIND")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Building without CONFIG_BPF_EVENTS produces a build-time
warning:
WARN: resolve_btfids: unresolved symbol bpf_session_is_return
The function is actually defined in kernel/trace/bpf_trace.o,
which is built conditionally based on configuration.
Make the reference to this function conditional as well,
as is already done in the bpf verifier for other functions.
Fixes: 8fe4dc4f64 ("bpf: change prototype of bpf_session_{cookie,is_return}")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260515113242.2706303-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Email to Jianjun Wang <jianjun.wang@mediatek.com> bounces with error:
"550 Relaying mail to jianjun.wang@mediatek.com is not allowed".
Remove the address to avoid sending future kernel maintenance queries
to an unreachable destination.
The MediaTek PCIe driver remains supported by Ryder Lee.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260515153635.136054-1-18255117159@163.com
One of the nastier things about epoll is how it allows adding epoll
files to epoll contexts. This leads to all sorts of loop detection
code, and has been a source of issues in the past.
Arguably adding IORING_EPOLL_CTL is a historical mistake on the
io_uring side, but we're kind of stuck with it now as it does seem
to be in use according to code searches. But we can at least minimize
the damage a bit and just disallow this part of epoll, where nesting
issues can arise.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge the VFS epoll series, which has the required patches to do the
io_uring cleanup on top.
* 'vfs-7.2.eventpoll' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
eventpoll: rename struct epoll_filefd to epoll_key
eventpoll: add file based control interface
eventpoll: export is_file_epoll()
eventpoll: pass struct epoll_filefd through ep_find() and ep_insert()
eventpoll: hoist CTL_ADD scratch state into struct ep_ctl_ctx
eventpoll: use bool for predicate helpers
eventpoll: rename epi->next and txlist for clarity
eventpoll: wrap EP_UNACTIVE_PTR in typed sentinel helpers
eventpoll: extract lock dance from do_epoll_ctl() into ep_ctl_lock()
eventpoll: extract ep_deliver_event() from ep_send_events()
eventpoll: split ep_clear_and_put() into drain helpers
eventpoll: split ep_insert() into alloc + register stages
eventpoll: relocate KCMP helpers near compat syscalls
eventpoll: rename attach_epitem() to ep_attach_file()
eventpoll: drop unused depth argument from epoll_mutex_lock()
eventpoll: rename ep_refcount_dec_and_test() to ep_put()
eventpoll: document ep_clear_and_put() two-pass pattern
eventpoll: refresh epi_fget() / ep_remove_file() comments
eventpoll: clarify POLLFREE handshake comments
eventpoll: document loop-check / path-check globals
...
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown.
Fixes: 47ceabd99a ("ALSA: hda: cs35l41: Support Firmware switching and reloading")
Fixes: 4c870513fb ("ALSA: hda: cs35l41: Add read-only ALSA control for forced mute")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260511-alsa-hda-cs35l41-fw-work-teardown-v1-1-1184e9bc4f25@gmail.com
Bring in a bunch of fixes for the casefold work.
* patches from https://patch.msgid.link/20260515153515.362266-1-cel@kernel.org:
nfsd: Cap case-folding probe cost across READDIR entries
nfsd: Map -ESTALE from case probe to NFS3ERR_STALE
nfsd: Use kernel credentials for case-info probe
fs: Clarify FS_CASEFOLD_FL semantics in UAPI header
nfs: Skip pathconf probe when neither field is consumed
nfs: Avoid transient zeroed case capability bits during probe
tools headers UAPI: Sync case-sensitivity flags from linux/fs.h
Link: https://patch.msgid.link/20260515153515.362266-1-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
NFSv4 READDIR carries a per-entry attrmask. When the attrmask
includes FATTR4_CASE_INSENSITIVE or FATTR4_CASE_PRESERVING,
nfsd4_encode_fattr4() resolves each non-directory child's case
attributes by calling nfsd_get_case_info(), which dget_parent()s
back to the directory being read and re-runs the cred swap and LSM
probe per child. The encoder amplifies a single answer into one
prepare_kernel_cred() allocation, two LSM hooks, and one put_cred()
RCU callback for every non-directory entry.
No mainstream NFSv4 client has been observed to populate a READDIR
attrmask with these attributes; the Linux client queries them only
via SERVER_CAPS at mount time. The exposure is therefore to test
clients exploring corner cases and to hostile clients that submit
an attrmask designed to multiply server work by rd_dircount.
Probe the directory being read once and cache the result on
struct nfsd4_readdir for use by every non-directory child. The
probe targets the readdir filehandle's dentry, which is held for
the duration of the request, rather than dget_parent() of a
child's locklessly-acquired dentry; the latter could be moved out
of the directory by a concurrent rename and report attributes
from an unrelated parent. Directory entries continue to be
queried individually, because casefold-capable filesystems (ext4,
f2fs) report case state per directory. The other callers of
nfsd4_encode_fattr4() (single GETATTR, the buffer wrapper) pass
NULL for the cache pointer and behave as before.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=14
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-8-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The PATHCONF switch in nfsd3_proc_pathconf() recognizes -EOPNOTSUPP
(filesystem does not expose case state) and maps -EACCES / -EPERM to
nfserr_stale, but lets every other errno fall through to
nfserr_serverfault. -ESTALE escapes the same way even though RFC 1813
lists NFS3ERR_STALE as a permitted PATHCONF status, so a probe of an
NFS-backed re-export whose parent dentry has been invalidated returns
SERVERFAULT and tells the client the server is broken when the handle
itself simply went stale.
Add an explicit -ESTALE arm that maps to nfserr_stale.
Fixes: a8de9c3b40e4 ("nfsd: Report export case-folding via NFSv3 PATHCONF")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=13
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-7-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
nfsd_get_case_info() takes prepare_creds() and overrides fsuid/fsgid
to GLOBAL_ROOT, intending to escape per-client policy on the parent
directory. prepare_creds() copies the calling task's full credential,
including the LSM security label, so only the DAC identity is
neutralized. With labeled NFS, where the active LSM context has been
mapped to the client, security_inode_file_getattr() can still deny the
probe with -EACCES even though the case-folding property the caller
wants is structural and identical for every client. The docblock
already states the intent ("the probe runs with kernel credentials"),
which the implementation does not deliver.
prepare_kernel_cred(&init_task) constructs a credential from
init_task's identity and security label, the kernel's own unconfined
context. Use it instead and drop the redundant fsuid/fsgid overrides
that init_task already supplies. The probe now matches the docblock,
LSM denials on the parent disappear, and the call sites that map an
unexpected error to NFS3ERR_SERVERFAULT or fail an NFSv4 GETATTR
outright stop seeing -EACCES from this path.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=14
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-6-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The existing one-liner "Folder is case insensitive" leaves the
impression that FS_CASEFOLD_FL is reserved for directories.
That impression is wrong: filesystems that derive
case-insensitivity from mount or volume state report the bit on
non-directory inodes via i_op->fileattr_get, so userspace
inspecting FS_IOC_GETFLAGS can see it on any inode type.
Replace the one-liner with a block comment that names directories
as the typical case, records that non-directory inodes may also
report the bit, and notes FS_XFLAG_CASEFOLD as the read-only
companion exposed through FS_IOC_FSGETXATTR.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=3
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-5-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The PATHCONF RPC issued from nfs_probe_fsinfo() supplies two pieces of
information: max_namelen, used only when server->namelen has not been
pinned by mount options, and the case_insensitive / case_preserving
fields, used only by the NFSv2/NFSv3 path. NFSv4 receives its case
sensitivity caps from the FATTR4_CASE_* attributes during the
set_capabilities probe, and a non-zero server->namelen short-circuits
the only other field of interest.
When both conditions hold (NFSv4 with namelen pinned), the pathconf
reply is discarded in full but the round-trip is still on the mount
critical path. Gate the call on version < 4 || namelen == 0 so that
mounts which cannot benefit from the reply do not pay for it.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=10
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-4-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
nfs_probe_fsinfo() clears NFS_CAP_CASE_INSENSITIVE and
NFS_CAP_CASE_NONPRESERVING ahead of the synchronous pathconf RPC and
sets them again only after the reply arrives. The code path is gated
by clp->rpc_ops->version < 4 and is therefore reached on NFSv2/v3
remount via nfs_reconfigure(), which calls nfs_probe_server() against
a live mount. Concurrent readers walking server->caps can observe the
cleared state for the duration of the round-trip and report the wrong
case-sensitivity attributes.
Compute the post-probe capability mask on the stack and assign it to
server->caps in a single store so readers see either the stale value
or the freshly computed one, never an intermediate zero. Preserve the
original behaviour of dropping the bits when the pathconf RPC itself
fails.
The analogous transient zero on the NFSv4 path lives in
nfs4_server_capabilities() and is left for a separate fix.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=10
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-3-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The case-sensitivity series adds FS_XFLAG_CASEFOLD and
FS_XFLAG_CASENONPRESERVING to include/uapi/linux/fs.h, and
tools/perf/check-headers.sh would warn about the resulting drift
in the perf beauty copy. Pick up only those two flags (and the
surrounding comment block) so the series does not introduce new
drift of its own.
This is not a full sync. The perf copy is also missing the
FS_IOC_SHUTDOWN block added by commit 1f662195db ("fs: add
generic FS_IOC_SHUTDOWN definitions"). Because
tools/perf/check-headers.sh emits a single warning per file, that
warning will remain active until the older drift is picked up
too; closing it is left to a separate sync outside this series.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=2
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Jens Axboe <axboe@kernel.dk> says:
One of the nastier things about epoll is how it allows nesting contexts
inside each other, leading to the necessity of loop detection and the
issues that have come with that.
I don't believe there's any reason to support nesting on the io_uring
side, in fact IORING_OP_EPOLL_CTL is a historical mistake, imho. But
let's at least try and contain the damage and disallow nested contexts
from our side.
Christian Brauner <brauner@kernel.org> says:
Bring in the eventpoll specific io_uring changes together with the
eventpoll cleanup I did this cycle. The io_uring changes can go on top
of both through the block tree.
* patches from https://patch.msgid.link/20260514140817.623026-1-axboe@kernel.dk:
eventpoll: rename struct epoll_filefd to epoll_key
eventpoll: add file based control interface
eventpoll: export is_file_epoll()
eventpoll: pass struct epoll_filefd through ep_find() and ep_insert()
Link: https://patch.msgid.link/20260514140817.623026-1-axboe@kernel.dk
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
This more accurately describes what purpose this structure serves, as
a lookup key.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://patch.msgid.link/20260514140817.623026-5-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add do_epoll_ctl_file(), which takes a pre-resolved epoll file and a
struct epoll_filefd for the target rather than two integer file
descriptors. do_epoll_ctl() remains as a thin wrapper.
In preparation for using the file based interface from io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://patch.msgid.link/20260514140817.623026-4-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make is_file_epoll() available outside of epoll. This is in preparation
from using it from io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://patch.msgid.link/20260514140817.623026-3-axboe@kernel.dk
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Have ep_find() and ep_insert() take a struct epoll_filefd rather
than a file/fd tuple. Kill off ep_set_ffd() as it's now no longer
needed.
No functional change. This is a prep patch for adding a file based
do_epoll_ctl() variant.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://patch.msgid.link/20260514140817.623026-2-axboe@kernel.dk
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The workload tracing guide shows how to build a cscope database by
running cscope command directly. The kernel build system also provides
a cscope target, which supports IGNORE_DIRS for excluding directories
from the generated database.
Mention make cscope and show how to exclude Documentation/ as an example.
Signed-off-by: Cheng-Han Wu <hank20010209@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260503101429.254394-5-hank20010209@gmail.com>
The workload tracing guide lists a fixed set of benchmarks for
"perf bench all". This list is stale and can become outdated when
perf adds, removes, or renames benchmark collections or individual
benchmarks.
Describe "perf bench all" as running all available benchmarks in the perf
bench framework instead. Also document how to list the collections and
benchmarks available on a given system.
Signed-off-by: Cheng-Han Wu <hank20010209@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260503101429.254394-4-hank20010209@gmail.com>
The workload tracing guide includes stress-ng command examples with a
stray "command." word at the end. This makes the examples invalid if they
are copied and run directly.
Remove the stray word from the stress-ng example. Also use "--" in the
perf record example to clearly separate perf record options from the
workload command being recorded.
Signed-off-by: Cheng-Han Wu <hank20010209@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260503101429.254394-3-hank20010209@gmail.com>
This set consists of a bug fix and three QoL fixes:
* Fix touchscreen breakage in low ambient temperatures on coreprimevelte
* Free up most of the framebuffer memory on coreprimevelte
* Fill in some missing properties for pre-0.2 PSCI and coreprimevelte SDIO
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQDpR7SDmVXkUByPWK+Mi3Xw1lZxQUCaf8PjwAKCRC+Mi3Xw1lZ
xdb5AQCGPmJLc8IY9cmyin3D9l3+CXBisLokoNqnkpA1Jq9cEwEAuacdxQaL8JKE
21BnCUQ6bcDcQhxC7k7EBlViHlyxBgI=
=jJS4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zdG7
-----END PGP SIGNATURE-----
Merge tag 'pxa1908-dt-for-7.2' of https://codeberg.org/pxa1908-mainline/linux into soc/dt
PXA1908 DT changes for 7.2
This set consists of a bug fix and three QoL fixes:
* Fix touchscreen breakage in low ambient temperatures on coreprimevelte
* Free up most of the framebuffer memory on coreprimevelte
* Fill in some missing properties for pre-0.2 PSCI and coreprimevelte SDIO
* tag 'pxa1908-dt-for-7.2' of https://codeberg.org/pxa1908-mainline/linux:
arm64: dts: marvell: samsung-coreprimevelte: Add missing SDIO properties
arm64: dts: marvell: pxa1908: Add PSCI function IDs
arm64: dts: marvell: samsung,coreprimevelte: Use memory-region for framebuffer
arm64: dts: marvell: samsung-coreprimevelte: Increase touchscreen voltage
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
