Replace the open-coded variant with MAX().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The wait parameter in rng_get_data() is a boolean flag - use bool
instead of int to better reflect its actual type.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The forward declarations for drop_current_rng() and rng_get_data() are
not needed - remove them.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to prevent arithmetic overflows when checking the TX
buffer size, cap the associated data length to 0x80000000.
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 400c40cf78 ("crypto: algif - add AEAD support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zero-copy support is one of the riskiest aspects of AF_ALG. It
allows userspace to request cryptographic operations directly on
pagecache pages of files like the 'su' binary. It also allows userspace
to concurrently modify the memory which is being operated on, a recipe
for TOCTOU vulnerabilities.
While zero-copy support is more valuable in other areas of the kernel
like the frequently used networking and file I/O code, it has far less
value in AF_ALG, which is a niche UAPI. AF_ALG primarily just exists
for backwards compatibility with a small set of userspace programs such
as 'iwd' that haven't yet been fixed to use userspace crypto code.
Originally AF_ALG was intended to be used to access hardware crypto
accelerators. However, it isn't an efficient interface for that anyway,
and it turned out to be rarely used in this way in practice.
Thus, the risks of the zero-copy support in AF_ALG vastly outweigh its
benefits. Let's just remove it.
This commit removes it from the "skcipher" and "aead" algorithm types.
"hash" will be handled separately.
This is a soft break, not a hard break. Even after this commit, it
still works to use splice() or sendfile() to transfer data to an AF_ALG
request socket from a pipe or any file, respectively. What changes is
just that the kernel now makes an internal, stable copy of the data
before doing the crypto operation. So performance is slightly reduced,
but the UAPI isn't broken. And, very importantly, it's much safer.
Tested with libkcapi/test.sh. All its test cases still pass. I also
verified that this would have prevented the copy.fail exploit as well.
I also used a custom test program to verify that sendfile() still works.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space interface for skcipher operations")
Fixes: 400c40cf78 ("crypto: algif - add AEAD support")
Reported-by: Taeyang Lee <0wn@theori.io>
Link: https://copy.fail/
Reported-by: Feng Ning <feng@innora.ai>
Closes: https://lore.kernel.org/r/afYcc-tZFwvZZo76@ans-MacBook-Pro.local
Reviewed-by: Demi Marie Obenour <demiobenour@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When handling a PDH export, treat a zero-length userspace cert chain buffer
as a request to query the length of the relevant blobs. Failure to account
for the zero-length buffer trips a BUG_ON() when running with
CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the
ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation).
kernel BUG at arch/x86/mm/physaddr.c:28 !
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded
Tainted: G W 6.18.16-smp-DEV #1 NONE
Tainted: [W]=WARN
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28
RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293
RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600
RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010
RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000
R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000
FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308
[<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556
[<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline]
[<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline]
[<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
[<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline]
[<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98
[<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fd3158eac39
</TASK>
Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting
the physical address is just arithmetic, and the PSP errors out before
trying to write to the garbage address (which it must, otherwise querying
the blob lengths would clobber memory at pfn=0).
Fixes: 76a2b524a4 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove repeated "+".
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
Refuse to re-try initialization if SNP is not already initialized for
SNP_CONFIG.
This is technically an ABI break: before if SNP initialization failed it
could be transparently retriggered by this ioctl, and if no VMs were
running, everything worked fine. Hopefully this is enough of a corner case
that nobody will notice, but someone does, there are a few options:
* do something like symbol_get() for kvm and refuse to initialize if KVM is
loaded
* check each cpu's HSAVE_PA for non-zero data before re-initializing
* once initialization has failed, continue to refuse to initialize until
the ccp module is unloaded
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SNP_COMMIT command does not require the firmware to be in any
particular state. Skip initializing it if it was previously uninitialized.
The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in
Table 5 as a command that is allowed in the UNINIT state, but it is in fact
allowed and a future documentation update will reflect that.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Reported-by: Sashiko
Assisted-by: Gemini:gemini-3.1-pro-preview
Link: https://sashiko.dev/#/patchset/20260324161301.1353976-1-tycho%40kernel.org
CC: <stable@vger.kernel.org>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Assigning .driver_data for drivers that don't use this struct member is
just noise that can better be dropped. The same applies for an explicit
zero in the terminating entry. Drop these.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .driver_data member of the struct pci_device_id array was
initialized by list expressions. This isn't easily readable if you're
not into PCI. Using the PCI_DEVICE macro and named initializers is more
explicit and thus easier to parse. Also skip explicit assignment of 0
(which the compiler then takes care of) in the terminating entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Explicitly assigning 0 to driver_data in drivers not using this member
has no benefit. Drop these and similarly depend on the compiler to
zero-initialize the list terminator.
This is a preparation for making struct pci_device_id::driver_data an
anonymous union (which makes initializing using a list expression fail),
but it's also a nice cleanup by itself.
It was verified on x86 and arm64 that this change doesn't introduce
changes to the compiled drivers.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The URL https://www.chronox.de/jent.html resolves to a 404 Not Found.
Use https://www.chronox.de/jent/ instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since start_time = end_time - delta, start_time can only equal end_time
when delta is 0, making the explicit end_time == start_time check
redundant. Remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the crypto engine on the Qualcomm Nord Platform.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Describe coresight topology on R-Mobile APE6. Extend the current PTM node
with connection funnel, TPIU, ETB and replicator. The coresight on this
hardware is clocked from the ZT/ZTR trace clock.
Note that only core 0 part of the topology is described, because the
other cores are still not present in the DT.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add ZT trace bus and ZTR trace clock on the R-Mobile APE6.
These clock supply the coresight tracing modules, PTM, TPIU,
ETB and replicator. Without these clock, the coresight tracing
can not be operated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Implement support for the ZT trace bus and ZTR trace clocks on R-Mobile
APE6.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the ZT trace bus and ZTR trace clocks on R-Mobile APE6. These
clocks supply the coresight tracing modules, PTM, TPIU, ETB and
replicator. Without these clocks, coresight tracing can not be
operated. While this does change the ABI, it does so by extending the
existing clock-output-names, therefore if old software is used with new
DT, the coresight tracing parts will likely fail to probe, otherwise if
new software is used with an old DT, there is no impact.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA.
Fixes: d6568e3de4 ("ALSA: virtio: add support for audio controls")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260507-alsa-virtio-validate-kctl-info-v1-1-7404fb12ec37@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 778031e165 ("ALSA: hda/ca0132: Set HP/Speaker
auto-detect default from headphone pin verb") enables HP/Speaker
auto-detect by default when the headphone pin supports presence detect.
With auto-detect enabled, ca0132_select_out() and ca0132_alt_select_out()
choose the output from jack presence instead of the manual HP/Speaker
selection. This means selecting speaker output while headphones are
plugged in updates the control state, but audio still routes to the
headphones.
Treat an explicit manual output selection as a request to leave
auto-detect mode. Clear the HP/Speaker auto-detect switch before applying
the manual selection, and notify userspace so the auto-detect control
state is updated in mixers. Do this for both the normal HP/Speaker
Playback Switch and the alternate Output Select control used by desktop
cards.
This keeps auto-detect enabled by default for devices with jack presence
detection, while preserving the expected behavior that a manual output
choice takes effect immediately.
Fixes: 778031e165 ("ALSA: hda/ca0132: Set HP/Speaker auto-detect default from headphone pin verb")
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Link: https://lore.kernel.org/CAFTm+6AfeXKf=b2frG4xC5yC4jjM9TkD6c8+dOWWFw6BDjDESw@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When reading /sys/kernel/debug/pinctrl/*.pinctrl-sh-pfc/pinconf-groups
while CONFIG_DEBUG_PINCTRL is enabled, the user is confronted with a
seemlingly endless stream of identical messages on the console:
sh-pfc e6060000.pinctrl: cannot get configuration for pin group, missing group config get function in driver
Fix this by implementing the sh_pfc_pinconf_ops.pin_config_group_get()
callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/130ce567f23fd6eef8f5fa7273480a0e3ff2d1d9.1777562482.git.geert+renesas@glider.be
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process.
Cc: stable@kernel.org
Fixes: 610bfc6bc9 ("batman-adv: Receive fragmented packets and merge")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
A fix to plug a refcount leak in counter_alloc() if dev_set_name() fails
and the error path is taken.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCaga4SQAKCRC1SFbKvhIj
K6BFAQCT+DwFTzJ8JVt4eXZIwzZ/B5KdTetOMVST6pjqwy9OiAEAhLhZeMFdkAxg
KEUApW65KeKCSZKUEJeDftIOZxMx4ws=
=28xw
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 7.1
A fix to plug a refcount leak in counter_alloc() if dev_set_name() fails
and the error path is taken.
* tag 'counter-fixes-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: Fix refcount leak in counter_alloc() error path
The Eliza interconnect provider is missing the SDCC1 CNOC CFG slave
node. Add qhs_sdc1 to the provider node table so SDCC1 interconnect
paths can resolve to a provider node.
Hook qhs_sdc1 up to qsm_cfg and CN0, and bump the corresponding
qsm_cfg.num_links and bcm_cn0.num_nodes counts.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514-eliza-interconnect-add-missing-sdcc1-slave-node-v2-2-13c03bc890cb@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The Eliza RPMh interconnect binding is missing the SDCC1 CNOC CFG
slave ID. Add it so SDCC1 consumer can describe the corresponding
interconnect path.
Append the new ID to preserve the existing ABI values.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514-eliza-interconnect-add-missing-sdcc1-slave-node-v2-1-13c03bc890cb@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add a SND_PCI_QUIRK entry for the HP Pavilion Laptop 16-ag0xxx
(subsystem 0x103c:0x8cbc, Realtek ALC245). The
ALC245_FIXUP_HP_X360_MUTE_LEDS fixup is already used by the
neighbouring HP Pavilion Aero Laptop 13-bg0xxx (0x103c:0x8cbd);
it chains the master-mute COEF handler with the GPIO mic-mute
LED handler, which is what this machine needs.
Tested on the affected hardware: both the mute and mic-mute key
LEDs respond correctly to the keyboard hotkeys after this change.
Cc: <stable@vger.kernel.org>
Signed-off-by: Adrien Burnett <an.arctic.pigeon@gmail.com>
Link: https://patch.msgid.link/20260514165905.21175-1-an.arctic.pigeon@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Volume control for the speakers on the Lenovo Yoga Pro 7 15ASH11 laptop
doesn't work.
The DAC routing is the same as on the ThinkPad X1 Gen7 function, so reuse
the alc285_fixup_thinkpad_x1_gen7 to get it working.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260514153940.7320-1-xy-jackie@139.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_ctl_add() dereferences kctl->id.subdevice without checking
whether kctl is NULL. Multiple callers in sound/hda/codecs/ca0132.c
pass the return value of snd_ctl_new1() directly to snd_hda_ctl_add()
without a NULL check:
return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
snd_ctl_new1() returns NULL when the underlying snd_ctl_new() fails
on memory allocation (kzalloc_flex),which can occur under memory
pressure or via fault injection.
Add a NULL check at the entry of snd_hda_ctl_add(), matching the
pattern already used by snd_ctl_add_replace() at the same call
path (sound/core/control.c:515). Return -EINVAL to let callers
handle the error gracefully.
Fixes: 44f0c9782c ("ALSA: hda/ca0132: Add tuning controls")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Link: https://patch.msgid.link/20260514132245.3062884-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Samsung Galaxy Book5 360 (NP750QHA, PCI subsystem ID 0x144d:0xc902)
has severe audio distortion on the 3.5mm headphone jack. Applying
ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET corrects the output path
configuration, consistent with fixes already applied to other Samsung
Galaxy Book models using the same ALC256 codec.
Cc: stable@vger.kernel.org
Link: https://github.com/thesofproject/linux/issues/5648
Signed-off-by: Markus Kramer <linux@markus-kramer.de>
Link: https://patch.msgid.link/20260513222818.14351-1-linux@markus-kramer.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
First of all, it has to be 'default n' (small letter n), otherwise
it looks for CONFIG_N which is absent and in case of appearance
will enable something unrelated. Second and most important is that
'n' *is* the default 'default' already. Hence just drop malformed
line.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260513162758.365972-1-andriy.shevchenko@linux.intel.com
In addition to the mic jack fix, also need to avoid boosting the
internal mic too much, otherwise >50% input volume clips a lot.
Also add a second SSID. We have one for the classic chassis/speaker and
one for the new Pro chassis/speaker.
To: Jaroslav Kysela <perex@perex.cz>
To: Takashi Iwai <tiwai@suse.com>
To: linux-sound@vger.kernel.org
Cc: Dustin L. Howett <dustin@howett.net>
Cc: linux@frame.work
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Link: https://patch.msgid.link/20260513155513.11683-1-dhs@frame.work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Store the ASIHPI control-cache lookup table in the control-cache
allocation instead of allocating it separately.
This keeps the lookup table tied to the cache object lifetime and
removes the extra allocation and free path.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260511230121.28606-1-rosenp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Store the SRCIMP imapper entries in the SRCIMP resource allocation
instead of allocating a separate array.
This keeps the mapper table tied to the SRCIMP lifetime and removes
the extra allocation and cleanup paths.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260511230026.28488-1-rosenp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The C400/C600 interfaces have a large output gain knob which attenuates
the outputs as stereo pairs (1/2, 3/4 and 5/6). The Windows driver/app
provides a control to disable this knob/behaviour on any/all outputs,
forcing maximum gain on each.
The 'disable behaviour' is desirable if any outputs are being used for
aux/effects sends, or if interface is being used as a live/matrix mixer.
This patch adds a control to select which output pairs are affected by
the Output Gain Knob. Default behaviour is to select all outputs.
Tested on the C600, likely also works for the C400.
Signed-off-by: Simon Wood <simon@mungewell.org>
Link: https://patch.msgid.link/20260511212458.44142-1-simon@mungewell.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the Positivo DN50E is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20260511181558.670563-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDA drivers were moved to sound/hda/... so update a Documentation
reference that still pointed to the old location.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260511104148.36382-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Store MIDI channel entries in the MIDI channel set allocation instead
of allocating them separately.
This ties the channel array lifetime directly to the channel set, removes
a separate allocation failure path, and lets __counted_by() describe the
array bounds. Move the embedded emux channel set to the end of its
containing structure so it can carry the flexible array.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260511075447.445350-1-rosenp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
uaudio_transfer_buffer_setup() calls dma_get_sgtable() and then passes
the sg_table to uaudio_iommu_map_xfer_buf() without checking whether sg
table construction succeeded. If dma_get_sgtable() fails, the sg_table
contents are not valid.
uaudio_iommu_map_pa() also ignores iommu_map() failures for the event and
transfer rings and still returns the allocated IOVA to the QMI response.
That can expose an unmapped IOVA to the audio DSP. For transfer rings,
the failed mapping also leaves the IOVA allocator state marked in use.
Check both operations. Free the coherent transfer buffer when sg table
construction fails, free the sg table when transfer-buffer IOMMU mapping
fails, and release the transfer-ring IOVA if iommu_map() fails. Also
return the existing event-ring IOVA when the event ring is already mapped,
matching the pre-split helper behavior.
Fixes: 326bbc3482 ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Fixes: 44499ecb4f ("ALSA: usb: qcom: Fix false-positive address space check")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260511-alsa-usb-qcom-offload-map-errors-v1-1-6502695e58bc@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
lsdc_pci_probe() initializes KMS polling before setting up vblank support,
requesting the IRQ and registering the DRM device. If any of those later
steps fails, probe returns without finalizing polling. The driver also
never finalizes polling on regular removal.
Use drmm_kms_helper_poll_init() so polling is tied to the DRM device
lifetime and automatically finalized on probe failure and device removal.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: f39db26c54 ("drm: Add kms driver for loongson display controller")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260513065706.23803-1-mhun512@gmail.com
The Acer Nitro AN515-58 uses GPIO 4 in active-low configuration to
control the mic-mute LED. This patch adds a fixup to register the LED
classdev and associate it with the mic-mute trigger, while chaining to
the existing headset mic fixup.
Signed-off-by: Dirga Yuza <dirgayuza123@gmail.com>
Link: https://patch.msgid.link/20260510055951.9035-1-dirgayuza123@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Legion 7 16ITHG6 uses codec SSID 17aa:3855, but its PCI
SSID is 17aa:3811. The latter is now also used by the Legion S7 15IMH05
quirk, which is matched before codec SSID fallback and incorrectly
routes Legion 7 16ITHG6 machines to ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS.
That fixup does not bind the CLSA0101 CS35L41 companion amplifiers,
making the built-in speakers silent even though playback appears to be
active.
Add a codec SSID quirk for 17aa:3855 before the conflicting PCI SSID
quirk so that the Legion 7 16ITHG6 uses ALC287_FIXUP_LEGION_16ITHG6.
This restores CS35L41 firmware loading and binds both speaker
amplifiers.
Fixes: 67f4c61a73 ("ALSA: hda/realtek: Add quirk for Legion S7 15IMH")
Cc: stable@vger.kernel.org
Tested-by: Nicholas Bonello <hadobedo@gmail.com>
Assisted-by: Codex:GPT-5
Signed-off-by: Nicholas Bonello <hadobedo@gmail.com>
Link: https://patch.msgid.link/20260508225507.47667-1-hadobedo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=3302, idProduct=17c2
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB-C Audio
usb 1-1: Manufacturer: TTGK Technology
usb 1-1: SerialNumber: 170120210706
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB621720E4E8F99A42E162FD51D23D2@TYUPR06MB6217.apcprd06.prod.outlook.com
When initialise new control with scarlett2_add_new_ctl() function for
Autogain Status, scarlett2_add_new_ctl() might throw an error. So, add
error check after initialise new control for Autogain Status.
This is reported by Coverity Scan with CID 1598781 as UNUSED_VALUE.
Fixes: 0a995e38dc ("ALSA: scarlett2: Add support for software-controllable input gain")
Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com>
Link: https://patch.msgid.link/20260508033914.111596-1-robertusdchris@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
