The code like
int foo = X;
...
if (bar)
foo = Y;
is prone to subtle mistakes and hence harder to maintain as the foo value
may be changed inadvertently while code in '...' grown in lines. On top
it's harder to navigate to understand the possible values of foo when branch
is not taken (requires to look somewhere else in the code, far from the piece
at hand).
Besides that in case of taken branch the foo will be rewritten, which is
not a problem per se, just an unneeded operation.
Decouple assignment and definition to use if-else to address the inconveniences
described above.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of checking for the specific error codes (that can be considered
a layering violation to some extent) check for the property existence first
and then either parse it, or apply a default value.
With that, return an error when parsing of the existing property fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no code that uses ID table directly, except the
struct device_driver at the end of the file. Hence, move
table closer to its user. It's always possible to access
them via a pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the generic firmware node interface for retrieving
device match data instead of the OF-specific one.
While at it, drop unneeded argument to devm_phy_create() which
extracts device node from the given device by default.
Reviewed-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override()
so platform drivers that rely on the existence of a device's driver
data need to verify its presence.
Accordingly, add requisite match and driver data checks against NULL
to the driver where they are missing.
Fixes: a4a86d273f ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for 25GBASE-R in the Lynx 28G SerDes PHY driver. This will
be used by the dpaa2-mac consumer on LX2160A with:
- phy_validate(phy, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_25GBASER) to
detect support.
- phy_set_mode_ext(phy, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_25GBASER)
to reconfigure the lane for this protocol.
The intended use case for dynamic protocol switching to 25GBase-R is
with SFP28 modules, and protocol switching is triggered by the SFP
module insertion. There also exists a 25GBase-KR use case, where the
protocol switching is covered by IEEE 802.3 clause 73 auto-negotiation.
However, that is not handled here; it merely needs the support added
here as basic ground work.
The lane frequency for 25GbE is sourced from a clock net frequency of
12.890625 GHz, as produced by PLLF or PLLS, further multiplied by the
lane by 2. The clock net frequencies produced by the PLLs are treated as
read-only by the driver, so the absence of a PLL provisioned for the
right clock net frequency implies absence of 25GbE support, even though
a lane might have the appropriate protocol converter for it.
In terms of implementation, the change consists of:
- determining at probe time if any PLL was preconfigured for the
required clock net frequency for 25GbE
- adding the default lane parameters for reconfiguring a lane to 25GbE
irrespective of the original protocol
- allowing this operating mode only on supported lanes, i.e. all lanes
of LX2162A SerDes #1, and LX2160A SerDes lanes 0-1, 4-7.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add driver support for probing on the new, per-instance and per-SoC
bindings, which provide the main benefit that they allow rejecting
unsupported protocols per lane (10GbE on SerDes 2 lanes 0-5), but they
also allow avoiding the creation of PHYs for lanes that don't exist
(LX2162A lanes 0-3).
For old device trees with just "fsl,lynx-28g", the only things that
change are:
- a probe time warning/encouragement to update the device tree. This is
warranted by the fact that using "fsl,lynx-28g" may already provide
incorrect behaviour (undetected absent 10GbE support on LX2160A
SerDes 2 lanes 0-5). But we retain bug compatibility nonetheless.
- the feature set is frozen in time (e.g. no 25GbE). Since we cannot
guarantee that this protocol will work on a lane, just err on the safe
side and don't offer it (and require a device tree update to get it).
In terms of code, the lynx_28g_supports_lane_mode() function prototype
changes. It was a SerDes-global function and now becomes per lane, to
reflect the specific capabilities each instance may have. The
implementation goes through priv->info->lane_supports_mode().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-5-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver will gain support for variants in an upcoming change, and
will use of_device_get_match_data() to deduce the running variant from
the compatible string.
Currently, the driver expects the schema at phy/fsl,lynx-28g.yaml, and
OF-based consumers, but doesn't enforce this. And it is possible for
user space to force-bind the driver to a device without OF node using
the driver_override sysfs.
To avoid future surprise crashes for an unsupported configuration,
explicitly test for the presence of an OF node and fail probing if
found.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SerDes 1 of LX2162A has fewer lanes than all other instances, and
strangely, their indices are not 0-3, but 4-7.
This is a best-effort constraint, since we can only impose it when using
per-SoC compatible string and per-lane OF nodes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-3-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 28G Lynx SerDes is instantiated 3 times in the NXP LX2160A SoC and
twice in the NXP LX2162A. All these instances share the same register
map, but the number of lanes and the protocols supported by each lane
differs in a way that isn't detectable by the programming model.
For example, not all lanes of all SerDes block instantiations support
25GbE.
So, using a generic "fsl,lynx-28g" compatible string and expecting all
SerDes instantiations to use it was a mistake that needs to be fixed.
The option chosen is to encode the SoC and the SerDes instance in the
compatible string, with everything else being the responsibility of the
driver to derive.
An alternative considered but dismissed was to add sufficient device
tree properties to describe the per-lane differences (implying:
supported protocols), as well as the different lane count.
Any decision made for the 28G Lynx should be consistent with the
decisions taken for the yet-to-be-introduced 10G Lynx SerDes (older
generation for older SoCs), because of how similar they are.
I've seen the alternative at play in this unmerged patch set for the 10G
Lynx here, and I didn't like it:
https://lore.kernel.org/linux-phy/20230413160607.4128315-3-sean.anderson@seco.com/
This is because there, we have a higher degree of variability in the
PCCR register values that need to be written per protocol. This makes
that approach more drawn-out and more prone to errors, compared to the
compatible strings which are more succinct and obviously correct.
NXP SoC reference manuals clearly document the SerDes instantiations as
not identical, and refers to them as such (SerDes 1, 2, etc).
The per-SoC compatible string is prepended to the "fsl,lynx-28g" generic
compatible, which is left there for compatibility with old kernels. An
exception would be LX2160A SerDes #3, which at the time of writing is
not described in fsl-lx2160a.dtsi. As "fsl,lx2160a-serdes3" implies it
is a 28G Lynx SerDes, it makes "fsl,lynx-28g" redundant so we don't
accept it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-2-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The residency multiplier conversion in get_residency_ms() used the
floating-point literal 1e6 as the divisor of mul_u64_u32_div(). While
the compiler constant-folds this to an integer, using float literals
in kernel code is bad practice since the kernel generally avoids
floating-point operations.
Replace 1e6 with the standard NSEC_PER_MSEC macro from <linux/time64.h>,
which is both self-documenting (ns to ms conversion) and unambiguously
integer. Add the corresponding include rather than relying on
transitive inclusion.
No functional change.
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260511153307.223435-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
Fixes: 2e5d47fe78 ("drm/xe/uc: Use managed bo for HuC and GSC objects")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Assisted-by: Claude:claude-opus-4.6
Link: https://patch.msgid.link/20260511154134.223696-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
percpu_array_map_ops.map_meta_equal points to the generic
bpf_map_meta_equal(), which does not compare max_entries. When a
percpu array serves as an inner map, replacing it with one that has
fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup()
inlines the original template's index_mask as a JIT immediate, a lookup
on the replacement map can access pptrs[] out of bounds.
Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(),
which already enforces the max_entries equality check.
Add a selftest to verify that replacing a percpu array inner map with
a differently-sized one is rejected.
Fixes: db69718b8e ("bpf: inline bpf_map_lookup_elem() for PERCPU_ARRAY maps")
Signed-off-by: Guannan Wang <wgnbuaa@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260514074454.77491-1-wgnbuaa@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mark all open DAI runtimes as suspended in the component .suspend
callback instead of relying on SNDRV_PCM_TRIGGER_SUSPEND, which is
not delivered during PAUSE or xrun states.
If during system suspend a dai is open it means that it is in either in
SUSPENDED, PAUSED or STOPPED (due to xrun) state and they will need to be
re-initialized during resume (which is done in .prepare callback).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508101755.1247039-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
smb3_reconfigure() moves strings out of cifs_sb->ctx before the
multichannel update, so a later failure can leave the live context
with NULL strings or options that do not match the session.
Stage the new ctx separately, commit it only on success, and restore
the snapshot on failure. Also make smb3_sync_session_ctx_passwords()
all-or-nothing.
Commit session passwords before channel updates so newly added channels
authenticate with the staged credentials.
Fixes: ef529f655a ("cifs: client: allow changing multichannel mount options on remount")
Reported-by: RAJASI MANDAL <rajasimandalos@gmail.com>
Closes: https://lore.kernel.org/lkml/CAEY6_V1+dzW3OD5zqXhsWyXwrDTrg5tAMGZ1AJ7_GAuRE+aevA@mail.gmail.com/
Link: https://lore.kernel.org/lkml/xkr2dlvgibq5j6gkcxd3yhhnj4atgxw2uy4eug2pxm7wy7nbms@iq6cf5taa65v/
Reviewed-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes a "duplicate tag error for tag 0" firmware crash during controller
reset while setting up a queue on Apple A11 / T8015 caused by stale
entries in the submission queue due to an invalid sq_tail offset after
reset.
Fixes: 04d8ecf37b ("nvme: apple: Add Apple A11 support")
Cc: stable@vger.kernel.org
Suggested-by: Yuriy Havrylyuk <yhavry@gmail.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
On 32-bit architectures, the infinite loop is as follows:
len = p->ErrorDataLength == 0xfffffff8
u8 *next = p->ErrorContextData + len
next == p
On 32-bit architectures, the out-of-bounds read is as follows:
len = p->ErrorDataLength == 0xfffffff0
u8 *next = p->ErrorContextData + len
next == (u8 *)p - 8
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Cc: stable@vger.kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/netdev/aaVgJ16edTfQkYbx@v4bel/
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 80747caef3 ("ovpn: introduce the ovpn_peer object")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly
rather than ovpn_peer_put(), bypassing the kref. The accompanying
comment ("peer was not yet hashed, thus it is not used in any context")
holds for UDP but not for TCP.
For UDP, the ovpn_socket union uses the .ovpn arm and never points back
at a peer; UDP encap_recv looks up peers via the not-yet-populated
hashtables, so the new peer is unreachable until ovpn_peer_add()
publishes it.
For TCP, ovpn_socket_new() sets ovpn_sock->peer and
ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().
From that moment until ovpn_socket_release() detaches in the error path,
the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll
on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can
reach the peer through sk_user_data -> ovpn_sock->peer and bump its
refcount via ovpn_peer_hold().
ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())
drains strparser and the tx work, but does not synchronize with
userspace syscall callers that already hold a peer reference. If
ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such
a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in
__skb_recv_datagram() on peer->tcp.user_queue - the direct
ovpn_peer_release() destroys the peer while the caller still holds
the reference, and the eventual ovpn_peer_put() from that caller
operates on freed memory.
Replace the direct destructor call with ovpn_peer_put() so the kref
correctly defers destruction until the last reference is dropped.
In the common case where no concurrent user is present, behaviour is
unchanged: the kref hits zero immediately and ovpn_peer_release_kref()
runs the same destructor.
With this conversion ovpn_peer_release() has no callers outside peer.c
- ovpn_peer_release_kref() in the same translation unit is the only
remaining user - so make it static and drop its declaration from
peer.h.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data()
under rcu_read_lock(), takes a reference on sock->peer, caches the peer
pointer in a local, and drops the read lock. It then passes sock->peer
(rather than the cached local) to ovpn_peer_del(), re-dereferencing the
ovpn_socket after the RCU read section has ended.
Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use
after unlock" pattern but is protected by lock_sock() held across the
function, ovpn_tcp_close() runs without the socket lock: inet_release()
invokes sk_prot->close() without taking lock_sock first.
ovpn_socket_release() can therefore complete its kref_put -> detach ->
synchronize_rcu -> kfree(sock) sequence concurrently, in the window
after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences
sock->peer. The synchronize_rcu() in ovpn_socket_release() protects
readers that use the dereferenced pointer inside the RCU read section,
not those that escape the pointer to a local and use it afterwards.
A reproducer follows the pattern of commit 94560267d6 ("ovpn: tcp -
don't deref NULL sk_socket member after tcp_close()"): trigger a peer
removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same
moment userspace closes the TCP fd. That commit fixed the detach-side
of the same race window; this one fixes the close-side at a different
victim.
Tighten the entry block to read sock->peer exactly once into the cached
peer local, and route all subsequent uses (the hold check, the
ovpn_peer_del() call, and the prot->close() invocation) through that
local. sock->peer is only ever written once in ovpn_socket_new() under
lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket,
and is never reassigned afterwards - but the previous multi-read pattern
made that invariant implicit rather than explicit. The same multi-read
shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(),
ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned
up via a dedicated helper in a follow-up net-next series.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Commit 201ba70631 ("selftests: ovpn: reduce ping count in test.sh")
lowered the baseline traffic flood ping count to avoid flakes on slower
CI instances, however some instances were left out.
Apply the same limit to the remaining ovpn selftest flood pings that
still request 500 packets.
Fixes: 201ba70631 ("selftests: ovpn: reduce ping count in test.sh")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
There's no real reason to have a limit, as the memory is accounted by
the lockmem limits anyway, if any exist. io_pin_pages() will still
restrict the maximum allowed limit per buffer, which is INT_MAX
number of pages. Cap it a bit lower than that, at 1TB for a 64-bit
system. Surely that should be enough for everyone. For now.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for supporting bigger individual buffers, bump the length
field to a full 8-bytes with size_t rather than an unsigned int.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track huge page references in a per-ring xarray to prevent double
accounting when the same huge page is used by multiple registered
buffers, either within the same ring or across cloned rings.
When registering buffers backed by huge pages, we need to account for
RLIMIT_MEMLOCK. But if multiple buffers share the same huge page (common
with cloned buffers), we must not account for the same page multiple
times. Similarly, we must only unaccount when the last reference to a
huge page is released.
Maintain a per-ring xarray (hpage_acct) that tracks reference counts for
each huge page. When registering a buffer, for each unique huge page,
increment its accounting reference count, and only account pages that
are newly added.
When unregistering a buffer, for each unique huge page, decrement its
refcount. Once the refcount hits zero, the page is unaccounted.
Note: any account is done against the ctx->user that was assigned when
the ring was setup. As before, if root is running the operation, no
accounting is done.
With these changes, any use of imu->acct_pages is also dead, hence kill
it from struct io_mapped_ubuf. This shrinks it from 56b to 48b on a
64-bit arch. Additionally, hpage_already_acct() is gone, which was an
O(M*M) scan over current + previous registrations.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the timer uses jiffies as its unit rather than ms, the timeout value
must be converted from ms to jiffies when configuring the timer. Otherwise,
the intended 8s timeout is incorrectly set to approximately 33s.
To improve readability, embed msecs_to_jiffies() directly in the macro
definitions and drop the _MS suffix from macros that now yield jiffies
values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT,
CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT.
IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are
intentionally left unchanged. Their values are stored in the struct fields
wake_retrans and tx_idle_delay, which hold ms values at runtime and can be
modified via debugfs. The msecs_to_jiffies() conversion happens at each
call site against the field value, so it cannot be embedded in the macro.
Wake timer depends on commit c347ca17d6
Cc: stable@vger.kernel.org
Fixes: d841502c79 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 1c08108f30 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end
warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure()
from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the
size and source-pointer arguments to l2cap_send_cmd():
- struct {
- struct l2cap_ecred_reconf_req req;
- __le16 scid;
- } pdu;
+ DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1);
...
l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ,
sizeof(pdu), &pdu);
After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous
union pdu_u plus a local pointer "pdu" pointing at it. Therefore:
- sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on
64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]).
- &pdu is the address of the local pointer's stack storage, not the
address of the request payload.
l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls
skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet
body therefore contains 8 bytes copied from the kernel stack starting at
&pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel
stack address to the paired Bluetooth peer. The intended (mtu, mps, scid)
fields are not transmitted at all, so the peer rejects the request as
malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken
for the local-side initiator since the introducing commit landed.
The sibling site l2cap_ecred_conn_req() in the same commit was converted
correctly (sizeof(*pdu) + len, pdu); only this site was missed.
Restore the original semantics: pass the full flex-struct size via
struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as
the source.
Validated on a stock 7.0-based host kernel via the real call path:
setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED
L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ
whose body is 8 bytes (the on-stack pdu local's value) rather than
the expected 6. Three captures from fresh socket / fresh hciemu peer
on the same host -- low bytes vary per call, high 0xffff confirms a
kernel virtual address (KASLR-randomised stack slot, not a fixed
string):
RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff
After this patch the body is 6 bytes carrying the expected
little-endian (mtu, mps, scid).
Cc: stable@vger.kernel.org
Fixes: 1c08108f30 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MT7925 (USB ID 0e8d:e025) on fw version 20260106153314 sends WMT
FUNC_CTRL events that are missing the status field.
Prior to commit 006b9943b982 ("Bluetooth: btmtk: validate WMT event SKB
length before struct access") the status was read from out-of-bounds of
SKB data, which usually would result to success with
BTMTK_WMT_ON_UNDONE, although I don't know the intent here. The bounds
check added in that commit returns with error instead, producing
"Bluetooth: hci0: Failed to send wmt func ctrl (-22)" and makes the
device unusable.
Fix the regression by interpreting too short packet as status
BTMTK_WMT_ON_UNDONE, which makes the device work normally again.
Fixes: 634a4408c0 ("Bluetooth: btmtk: validate WMT event SKB length before struct access")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> # MT7922 (0489:e0e2)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are some performance issues being identified by dynamic EPP
and we don't want to have distributions turning it on by default
exposing them to users at this time.
Drop the kconfig option, and require an explicit opt in from kernel
command line or runtime sysfs option to turn it on.
Reported-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Closes: https://lore.kernel.org/linux-pm/14a87c99-785c-4b16-bfce-35ecbf053448@freenet.de/
Reported-by: Stuart Meckle <stuartmeckle@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221473
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260512221947.1652988-1-mario.limonciello@amd.com
(fix sysfs file path)
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up.
Fixes: 70d645deac ("drm/ttm: Add helpers for shrinking")
Cc: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.15+
Assisted-by: GitHub_Copilot:claude-opus-4.6
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260511162443.24352-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
This adds custom filtering for IORING_OP_CONNECT, where the target
family is always exposed, and (for AF_INET / AF_INET6) port and
address are exposed. port and v4_addr are in network byte order so
filter authors can compare against on-wire constants.
Skip population unless addr_len covers the populated fields, to
avoid leaking stale io_async_msghdr data on short connects.
Signed-off-by: Shouvik Kar <auxcorelabs@gmail.com>
Link: https://patch.msgid.link/20260512110242.26219-1-auxcorelabs@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wrap the io_ring_head_to_buf() macro value in an extra pair of parentheses
so it is safe when composed into larger expressions, and to satisfy
scripts/checkpatch.pl.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Link: https://patch.msgid.link/20260514083443.203387-1-xieyi@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
flush_rcu_sheaves_on_cache() calls queue_work_on() in a
for_each_online_cpu() loop, which requires the cpu to stay online.
But cpus_read_lock() is not held in kvfree_rcu_barrier_on_cache() and the
set of "online cpus" is subject to change.
There are two paths that call flush_rcu_sheaves_on_cache():
// has cpus_read_lock()
flush_all_rcu_sheaves()
-> flush_rcu_sheaves_on_cache()
// no cpus_read_lock()
kvfree_rcu_barrier_on_cache()
-> flush_rcu_sheaves_on_cache()
Fix this by holding cpus_read_lock() in kvfree_rcu_barrier_on_cache().
Why not move cpus_read_lock() from flush_all_rcu_sheaves() into
flush_rcu_sheaves_on_cache()? The reason is it would introduce a new lock
order (slab_mutex -> cpu_hotplug_lock). The reverse order
(cpu_hotplug_lock -> slab_mutex) is established by
- cpuhp_setup_state_nocalls(..., slub_cpu_setup, ...)
- kmem_cache_destroy()
The two orders together would form an AB-BA deadlock.
Finally, add lockdep_assert_cpus_held() in flush_rcu_sheaves_on_cache()
to catch the same problem in the future.
Fixes: 0f35040de5 ("mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction")
Cc: <stable@vger.kernel.org>
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Link: https://patch.msgid.link/20260512035035.762317-1-wangqing7171@gmail.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
The unstripped vDSO files are useful for debugging.
They are provided in the upstream 'linux-headers' package.
Also package them as part of 'make pacman-pkg'.
Make them part of the '-debug' package, as they fit there best.
This differs from the upstream package as that has no '-debug' variant.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260318-kbuild-pacman-vdso-install-v1-1-48ceb31c0e80@weissschuh.net
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add a 'gpat' field to kvm_svm_nested_state_hdr to carry L2's guest PAT
value across save and restore.
When KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled and the vCPU is in
guest mode with nested NPT enabled, save vmcb02's g_pat into the header on
KVM_GET_NESTED_STATE, and restore it on KVM_SET_NESTED_STATE.
Host-initiated accesses to IA32_PAT (via KVM_GET/SET_MSRS) always target
L1's hPAT, so they cannot be used to save or restore gPAT. The separate
header field ensures that KVM_GET/SET_MSRS and KVM_GET/SET_NESTED_STATE are
independent and can be ordered arbitrarily during save and restore.
Note that struct kvm_svm_nested_state_hdr is included in a union padded to
120 bytes, so there is room to add the gpat field without changing any
offsets.
Fixes: cc440cdad5 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-9-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Document the nested state constants and structures for SVM that were added
by commit cc440cdad5 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and
KVM_SET_NESTED_STATE").
Fixes: cc440cdad5 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-8-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
According to the APM volume 3 pseudo-code for "VMRUN," when nested paging
is enabled in the vmcb, the guest PAT register (gPAT) is saved to the vmcb
on emulated VMEXIT.
When KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled and the vCPU is in
guest mode with nested NPT enabled, save the vmcb02 g_pat field to the
vmcb12 g_pat field on emulated VMEXIT.
Fixes: 15038e1472 ("KVM: SVM: obey guest PAT")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-7-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When handling PAT accesses from L2, route PAT accesses to either hPAT or
gPAT based on whether or not L2 has a separate PAT, i.e. if KVM is actually
emulating gPAT, instead of using L1's PAT for everything. Specifically, if
KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled, the vCPU is in guest mode
with nested NPT enabled, *and* the access if from the guest (i.e. is not
from the host stuffing PAT as part of save/restore), then redirect guest
PAT accesses to the gPAT "register" in vmcb02, i.e. emulate gPAT for L2.
Always route non-guest accesses to hPAT, i.e. L1's PAT in vcpu->arch.pat,
to ensures that KVM_{G,S}ET_MSRS and KVM_{G,S}ET_NESTED_STATE are
independent of each other and can be ordered arbitrarily during save and
restore. E.g. if KVM didn't exempt host accesses, then whether a write to
PAT hit hPAT or gPAT would vary based on whether userspace restores PAT
before or after nested state. Note, gPAT is saved and restored separately
via KVM_{G,S}ET_NESTED_STATE.
WARN if there's a host-initiated access to PAT from within KVM_RUN, i.e. if
KVM itself initiated the access, as there are no such accesses today, and
it's not clear what the "right" behavior would be.
Fixes: 15038e1472 ("KVM: SVM: obey guest PAT")
Signed-off-by: Jim Mattson <jmattson@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
When KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled and nested NPT is
enabled in vmcb12, copy the (cached and validated) vmcb12 g_pat field to
vmcb02's g_pat, giving L2 its own independent guest PAT register.
When the quirk is enabled (default), or when NPT is enabled but nested NPT
is disabled, copy L1's IA32_PAT MSR to the vmcb02 g_pat field, since L2
shares the IA32_PAT MSR with L1.
When NPT is disabled, the g_pat field is ignored by hardware.
Fixes: 15038e1472 ("KVM: SVM: obey guest PAT")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-5-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled and nested paging is
enabled in vmcb12, validate g_pat at emulated VMRUN and cause an immediate
VMEXIT with exit code VMEXIT_INVALID if it is invalid, as specified in the
APM, volume 2: "Nested Paging and VMRUN/VMEXIT."
Fixes: 3d6368ef58 ("KVM: SVM: Add VMRUN handler")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-4-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When running an L2 guest and writing to MSR_IA32_CR_PAT, the host PAT value
is stored in both vmcb01's g_pat field and vmcb02's g_pat field, but the
clean bit was only being cleared for vmcb02.
Introduce the helper vmcb_set_gpat() which sets vmcb->save.g_pat and marks
the VMCB dirty for VMCB_NPT. Use this helper in both svm_set_msr() for
updating vmcb01 and in nested_vmcb02_compute_g_pat() for updating vmcb02,
ensuring both VMCBs' NPT fields are properly marked dirty.
Fixes: 4995a3685f ("KVM: SVM: Use a separate vmcb for the nested L2 guest")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-3-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define a quirk to control whether nested SVM shares L1's PAT with L2
(legacy behavior) or gives L2 its own independent gPAT (correct behavior
per the APM).
When the quirk is enabled (default), L2 shares L1's PAT, preserving the
legacy KVM behavior. When userspace disables the quirk, KVM correctly
virtualizes the PAT for nested SVM guests, giving L2 a separate gPAT as
specified in the AMD architecture.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The threat-model document says that only users with CAP_SYS_ADMIN can carry
out a number of admin-level tasks, but there are numerous capabilities that
can confer that sort of power. Generalize the text slightly to make it
clear that CAP_SYS_ADMIN is not the only all-powerful capability.
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Rather than make readers search for this document, just a link to it where
it is referenced.
(While I was at it, I removed the unused and unneeded _threatmodel label
from the top of threat-model.rst).
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Increase the JFFS2 partition size to support larger root filesystem.
Also fix the partition label to match the actual start address.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The capital letters are for symbols and N in 'default N' will be evaluated as
another, nonexistent, Kconfig symbol, and not as the 'no' it should be. More
importantly, 'n' *is* the default already. Hence just drop the malformed line.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260513205021.368190-1-andriy.shevchenko@linux.intel.com
