Move the mutex_lock() call up to prevent that DCB settings change after
the first ice_query_port_ets() call. The second ice_query_port_ets()
call in ice_dcb_rebuild() is already protected by pf->tc_mutex.
This also fixes a bug in an error path, as before taking the first
"goto dcb_error" in the function jumped over mutex_lock() to
mutex_unlock().
This bug has been detected by the clang thread-safety analyzer.
Cc: intel-wired-lan@lists.osuosl.org
Fixes: 242b5e068b ("ice: Fix DCB rebuild after reset")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-6-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_set_rss_hfunc() performs a VSI update, in which it sets hashing
function, leaving other VSI options unchanged. However, ::q_opt_flags is
mistakenly set to the value of another field, instead of its original
value, probably due to a typo. What happens next is hardware-dependent:
On E810, only the first bit is meaningful (see
ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different
state than before VSI update.
On E830, some of the remaining bits are not reserved. Setting them
to some unrelated values can cause the firmware to reject the update
because of invalid settings, or worse - succeed.
Reproducer:
sudo ethtool -X $PF1 equal 8
Output in dmesg:
Failed to configure RSS hash for VSI 6, error -5
Fixes: 352e9bf238 ("ice: enable symmetric-xor RSS for Toeplitz hash function")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-5-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a18 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: stable@kernel.org
Fixes: be91128c57 ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Fixes: f4312e6bfa ("idpf: implement core RDMA auxiliary dev create, init, and destroy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-4-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.
Fixes: 5cb8805d23 ("idpf: negotiate PTP capabilities and get PTP clock")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-3-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PTP pin structs are allocated early in probe, but never cleaned up.
Fix this by calling i40e_ptp_free_pins in the error path.
To support this, i40e_ptp_free_pins is added to the header and
pin_config is correctly nullified after being freed.
This has been an issue since i40e_ptp_alloc_pins was introduced.
Fixes: 1050713026 ("i40e: add support for PTP external synchronization clock")
Reported-by: Kohei Enju <kohei@enjuk.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Kohei Enju <kohei@enjuk.jp>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-2-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix two conditions which would leak PTP registration on probe failure:
1. i40e_setup_pf_switch can encounter an error in
i40e_setup_pf_filter_control, call i40e_ptp_init, then return
non-zero, sending i40e_probe to err_vsis.
2. i40e_setup_misc_vector can return non-zero, sending i40e_probe to
err_vsis.
Both of these conditions have been present since PTP was introduced in
this driver.
Found with coccinelle.
Fixes: beb0dff125 ("i40e: enable PTP")
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-1-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool on this phy device always reports "MDI-X: Unknown" and doesn't
support forcing it to on or off.
This patch adds support for reading/forcing MDI-X mode from ethtool
properly.
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260506141918.13136-1-l.ellero@asem.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three macros for declaring static binary attributes for PCI resource
files:
- pci_dev_resource_io_attr(), for I/O BAR resources (read/write)
- pci_dev_resource_uc_attr(), for memory BAR resources (mmap uncached)
- pci_dev_resource_wc_attr(), for write-combine resources (mmap WC)
Each macro only sets the callbacks its resource type needs. The I/O macro
conditionally includes mmap support via __PCI_RESOURCE_IO_MMAP_ATTRS on
architectures where arch_can_pci_mmap_io() is true at compile time (such as
PowerPC, SPARC, and Xtensa).
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-7-kwilczynski@kernel.org
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-6-kwilczynski@kernel.org
Both legacy and resource attributes set .f_mapping = iomem_get_mapping, so
the default generic_file_llseek() would consult iomem_inode for the file
size, which knows nothing about the attribute. That is why custom llseek
callbacks exist.
Currently, the legacy and resource attributes have .size set at creation
time, as such, using the attr->size is sufficient. However, the upcoming
static resource attributes will have .size == 0 set, since they are const,
and the .bin_size() callback will be used to provide the real size to
kernfs instead.
The legacy attributes operate on a struct pci_bus, not struct pci_dev, so
calling to_pci_dev() on them would be invalid.
Thus, split pci_llseek_resource() into two functions:
- pci_llseek_resource(), which derives the file size from the BAR using
pci_resource_len().
- pci_llseek_resource_legacy(), which uses attr->size directly.
Update the dynamic legacy attribute creation to use the new
pci_llseek_resource_legacy() callback.
The original pci_llseek_resource() was added in commit 24de09c16f ("PCI:
Implement custom llseek for sysfs resource entries").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-5-kwilczynski@kernel.org
When an existing node-scope shaper is moved to a different parent
via the group operation, the framework fails to update the leaves
count on both the old and new parent shapers. Only newly created
nodes (handle.id == NET_SHAPER_ID_UNSPEC) trigger the parent
leaves increment at line 1039.
This causes the parent's leaves counter to diverge from the
actual number of children in the xarray. When the node is later
deleted, pre_del_node() allocates an array sized by the stale
leaves count, but the xarray iteration finds more children than
expected, hitting the WARN_ON_ONCE guard and returning -EINVAL.
Rather than adding reparenting support with complex leaves count
bookkeeping, reject group calls that attempt to change an existing
node's parent. Updates to an existing node's rate or leaves under
the same parent remain permitted. We expect that for any modification
of the topology user should always create new groups and let the
kernel garbage collect the leaf-less nodes.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260506233745.111895-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when the sysfs attributes for PCI resources are added
dynamically, the resource access callbacks are only set when the underlying
BAR type matches, using .read and .write for IORESOURCE_IO, and .mmap for
IORESOURCE_MEM or IORESOURCE_IO with arch_can_pci_mmap_io() support. As
such, when the callback is not set, the operation inherently fails.
After the conversion to static attributes, visibility callbacks will
control which resource files appear for each BAR, but the callbacks
themselves will always be set.
Add a type check to pci_resource_io() and pci_mmap_resource() to return
-EIO for an unsupported resource type.
Use the new pci_resource_is_io() and pci_resource_is_mem() helpers for the
type checks, replacing the open-coded bitwise flag tests and also drop the
local struct resource pointer in pci_mmap_resource().
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-4-kwilczynski@kernel.org
Add helpers to check whether a PCI resource is of I/O port or memory type.
These replace the open-coded pci_resource_flags() with IORESOURCE_IO and
IORESOURCE_MEM pattern used across the tree.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-3-kwilczynski@kernel.org
Replace direct pdev->resource[] accesses with pci_resource_n(), and
pdev->resource[].flags accesses with pci_resource_flags().
No functional changes intended.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-2-kwilczynski@kernel.org
These methods generally consume ownership of the provided skb, so even
if an error path is encountered, the skb is freed. This is because the
very first thing they do after some initial setup is to unconditionally
consume the skb via consume_skb(skb). Any subsequent errors lead to the
core netlink layer freeing the skb.
However, there is one check that occurs before ownership is passed,
which is the check for the group index. So if this error condition is
encountered, then the skb is leaked. This error condition is generally
considered a violation of the netlink API, so it's not expected to occur
under normal circumstances. For the same reason, no callers check for
this error condition, and no callers need to be adjusted. However, we
should still follow the same ownership semantics of the rest of the
function. Thus, free the skb in this codepath.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Matthew Maurer <mmaurer@google.com>
Fixes: 2a94fe48f3 ("genetlink: make multicast groups const, prevent abuse")
Link: https://lore.kernel.org/r/845b36ba-7b3a-41f2-acb2-b284f253e2ca@lunn.ch
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260506-genlmsg-return-v2-1-a63ee2a055d6@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to the generic power management and remove the usage of legacy
(pci_driver) hooks.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506165015.641738-1-vaibhavgupta40@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NSH header length is a 6-bit field that encodes the total length of
the header in 4-byte words. So the maximum length is 0b111111 * 4,
which is 252 and not 256. The maximum context length is the same
number minus the length of the base header (8), so 244.
These macros are used to validate push_nsh() action in openvswitch.
Miscalculation here doesn't cause any real issues. In the worst case
the oversized context is truncated while building the header, so we'll
construct and send a broken packet, which is not a big problem, as any
receiver should validate the fields. No invalid memory accesses will
happen during the header push. But we should fix the macros to reject
the incorrect actions in the first place.
Using previously defined values and calculating the length instead
of defining numbers directly, so it's easier to understand where they
come from and harder to make a mistake.
Fixes: 1f0b7744c5 ("net: add NSH header structures and helpers")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260507120434.2962505-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 383d89699c ("treewide: Drop pci_save_state() after
pci_restore_state()") sought to purge all superfluous invocations of
pci_save_state() from the tree.
Unfortunately the commit missed one invocation in the Broadcom
NetXtreme-C/E driver. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/39de1b025928d9a457976010b2324e7e99baa92a.1778158755.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I would like to hand over the macb maintenance to Théo, as I'm unable to
keep up with the recent flow of patches for this driver. After speaking
with Claudiu, he indicated that he is in the same position as me.
To help with this work, Conor has agreed to act as a reviewer.
I was given responsibility for this driver years ago, and I'm glad to
see it continue with talented developers.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260507120444.9733-1-nicolas.ferre@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We meet a crash when running stress-ng on x86_64 machine:
BUG: unable to handle page fault for address: ffa0000007f40000
RIP: 0010:pci_get_rom_size+0x52/0x220
Call Trace:
<TASK>
pci_map_rom+0x80/0x130
pci_read_rom+0x4b/0xe0
kernfs_file_read_iter+0x96/0x180
vfs_read+0x1b1/0x300
Our analysis reveals that the ROM space's start address is
0xffa0000007f30000, and size is 0x10000. Because of broken ROM space,
before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is
already pointed to the ROM space end, invoking readl() would read 4 bytes
therefore cause an out-of-bounds access and trigger a crash. Fix this by
adding image header and data structure checking.
We also found another crash on arm64 machine:
Unable to handle kernel paging request at virtual address ffff8000dd1393ff
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
The call trace is the same with x86_64, but the crash reason is that the
data structure addr is not aligned with 4, and arm64 machine report
"alignment fault". Fix this by adding alignment checking.
Fixes: 47b975d234 ("PCI: Avoid iterating through memory outside the resource window")
Suggested-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
[bhelgaas: shorten function names, wrap comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260508082128.3344255-3-kanie@linux.alibaba.com
Convert the magic numbers associated with PCI ROM into named
definitions. Some of these definitions will be used in the second
fix patch.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20260508082128.3344255-2-kanie@linux.alibaba.com
The dsa.yaml and ethernet-switch.yaml bindings recommend
prefixing ethernet switches and ports with "ethernet-" so
make the LAN966x do the same.
Reported-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260507-lan966-binding-v1-1-e99293d2a4ec@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The atl2 driver contains code for compatibility with old kernels that
do not support module_param_array. Backward compatibility is
irrelevant because this driver is in-tree. Remove this unreachable
code to simplify the driver's handling of module parameters.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506054035.23710-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When in irq deferral mode (defer-hard-irqs > 0), a short enough
gro-flush timeout can trigger before NAPI_STATE_SCHED is cleared if the
last poll in busy_poll_stop() takes too long. This can have the effect
of leaving the queue stuck with interrupts disabled and no timer armed
which results in a tx timeout if there is no subsequent busypoll cycle.
To prevent this, defer the gro-flush timer arm after the last poll.
Fixes: 7fd3253a7d ("net: Introduce preferred busy-polling")
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260506090808.820559-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maoyi Xie says:
====================
ipv6: flowlabel: per-netns budget for unprivileged callers
From: Maoyi Xie <maoyi.xie@ntu.edu.sg>
This series fixes the cross-tenant DoS in net/ipv6/ip6_flowlabel.c.
v1 through v6 were single-patch postings, each in its own thread.
v6 review pointed out that the existing fl_size read in
mem_check() and the corresponding write in fl_intern() are not in
the same critical section. v7 split the work into 2 patches.
Patch 1/2 is a prerequisite. It moves spin_lock_bh(&ip6_fl_lock)
and the matching unlock from fl_intern() into its only caller
ipv6_flowlabel_get(), so the mem_check() call runs under the same
critical section as the fl_intern() insert. With all writers and
the read of fl_size under the lock, fl_size is converted from
atomic_t to plain int. This is independent of the per-netns
budget. It also makes 2/2 backportable without conflicts.
Patch 2/2 is the v6 patch, rebased on 1/2.
- flowlabel_count is plain int rather than atomic_t, since the
previous patch put all writers and readers under ip6_fl_lock.
- In ip6_fl_gc(), fl_free() is now placed below the fl_size
and flowlabel_count decrements, removing the v6 cache of
fl->fl_net.
- In ip6_fl_purge(), fl_free() stays in its original position.
The function argument net is used for flowlabel_count.
- mem_check() uses spaces around the / operator on all four
expressions, addressing the checkpatch note in v6 review.
Numeric budget (preserved from v6):
pre-patch:
global non-CAP_NET_ADMIN budget = FL_MAX_SIZE - FL_MAX_SIZE/4
= 4096 - 1024 = 3072
per-actor reach = 3072
post-patch:
FL_MAX_SIZE doubled to 8192
global non-CAP_NET_ADMIN budget = 8192 - 2048 = 6144
per-netns ceiling = 6144 / 2 = 3072
per-actor reach = 3072 (preserved)
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
Reproducer (KASAN VM, 4 cores, qemu): unprivileged netns A holds
3072 flowlabels via 100 procs. Fresh unprivileged netns B then
allocates 32 flowlabels (the FL_MAX_PER_SOCK ceiling for one
socket), the same as a clean baseline. Without the per-netns
ceiling, netns A could push fl_size past FL_MAX_SIZE - FL_MAX_SIZE
/ 4 and netns B would see allocations denied.
====================
Link: https://patch.msgid.link/20260506082416.2259567-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl_size, fl_ht and ip6_fl_lock in net/ipv6/ip6_flowlabel.c are
file scope and shared across netns. mem_check() reads fl_size to
decide whether to deny non-CAP_NET_ADMIN callers. capable() runs
against init_user_ns, so an unprivileged user in any non-init
userns can push fl_size past FL_MAX_SIZE - FL_MAX_SIZE / 4 and
starve every other unprivileged userns on the host.
Add struct netns_ipv6::flowlabel_count, bumped and decremented
next to fl_size in fl_intern, ip6_fl_gc and ip6_fl_purge. The new
field fills the existing 4-byte hole after ipmr_seq, so struct
netns_ipv6 stays the same size on 64-bit builds.
Bump FL_MAX_SIZE from 4096 to 8192. It has been 4096 since the
file was added. Machines and connection counts have grown.
mem_check() folds an extra per-netns ceiling into the existing
non-CAP_NET_ADMIN conditional. The ceiling is half of the total
budget that unprivileged callers have ever been able to use, i.e.
(FL_MAX_SIZE - FL_MAX_SIZE / 4) / 2 = 3072 entries. With
FL_MAX_SIZE doubled, this preserves the original per-user reach
of 3K (what an unprivileged caller could already obtain before
this change), while forcing an attacker to spread allocations
across at least two netns to exhaust the global non-CAP_NET_ADMIN
budget.
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
The previous patch took ip6_fl_lock across mem_check and
fl_intern, so the new flowlabel_count read in mem_check and the
new flowlabel_count++ in fl_intern run under the same critical
section. flowlabel_count is therefore plain int, like fl_size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-3-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mem_check() in net/ipv6/ip6_flowlabel.c reads fl_size without
holding ip6_fl_lock. fl_intern() takes the lock immediately
afterwards. The two checks therefore race against concurrent
fl_intern, ip6_fl_gc and ip6_fl_purge writers, which makes the
mem_check budget check approximate.
Move spin_lock_bh(&ip6_fl_lock) and the matching unlock from
fl_intern() into its only caller ipv6_flowlabel_get(). The
mem_check() call now runs under the same critical section as the
fl_intern() insert, so the budget check is exact.
With all writers and the read of fl_size under ip6_fl_lock,
convert fl_size from atomic_t to plain int. The four sites that
update or read fl_size are fl_intern (insert path), ip6_fl_gc
(garbage collector, the !sched check and the per-entry decrement),
ip6_fl_purge (per-netns purge), and mem_check (budget check), and
all four now run under ip6_fl_lock.
This is a prerequisite for adding a per-netns budget alongside
fl_size. The follow-up patch adds netns_ipv6::flowlabel_count and
folds it into mem_check().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-2-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It appears there's a need for a maintainer for the 3Com EtherLink III
family of Ethernet network adapters. There is documentation available
and the driver is very mature so the task ought to be of little hassle,
so I think I should be able to squeeze in any issues to be addressed.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/alpine.DEB.2.21.2604271056460.28583@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
tcp: Two fixes for socket migration in reqsk_timer_handler().
The series fixes two bugs in the error path of socket migration
in reqsk_timer_handler().
Patch 1 fixes a potential UAF in reqsk_timer_handler().
Patch 2 fixes imbalanced icsk_accept_queue count.
====================
Link: https://patch.msgid.link/20260506035954.1563147-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIPA tries to make sure that HW tests don't modify system state.
It saves the state of page pools, too. Now that I write this commit
message I realize that this is impractical since page pool IDs and
state will get legitimately changed by the tests. But I already
spent a couple of hours implementing the filtering, so..
Link: https://patch.msgid.link/20260506034821.1710113-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration happens in reqsk_timer_handler(),
@sk_listener will be updated with the new listener.
When we call __inet_csk_reqsk_queue_drop(), the listener must
be the one stored in req->rsk_listener.
The cited commit accidentally replaced oreq->rsk_listener with
sk_listener, leading to imbalanced icsk_accept_queue count.
Let's pass the correct listener to __inet_csk_reqsk_queue_drop().
Fixes: e8c526f2bd ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer.
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new CPUID model will be added where its APIs will be designated as the
official CPUID API. Free the cpuid_leaf() and cpuid_subleaf() function
names for that API. Rename them accordingly to cpuid_read() and
cpuid_read_subleaf().
For kernel/cpuid.c, rename its local file operations read function from
cpuid_read() to cpuid_read_f() so that it does not conflict with the new
API.
No functional change.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20260327021645.555257-1-darwi@linutronix.de
asm/processor.h includes asm/cpuid/api.h but it does not need it.
Remove the include.
This allows the CPUID APIs header to include <asm/processor.h> at a later
step without introducing a circular dependency.
Note, all call sites which implicitly included the CPUID API through
<asm/processor.h> have been modified to explicitly include the CPUID APIs
instead.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20260327021645.555257-1-darwi@linutronix.de
In a multi-queue use case, when a job is running on the secondary queue,
the CTX_TIMESTAMP does not reflect the queues run ticks. Instead, we use
the QUEUE TIMESTAMP to check how long the job ran. For user space to see
the run ticks for a secondary queue, whitelist the QUEUE_TIMESTAMP
register.
Compute PR: https://github.com/intel/compute-runtime/pull/923
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-24-umesh.nerlige.ramappa@intel.com
I wish to contribute to the review process for Cadence PCIe IP drivers,
hence add myself as a reviewer.
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260508060951.840233-1-a-garg7@ti.com
When setting new_id of a PCI device driver using sysfs a lockdep splat
occurs. This is because new_id_store() builds a temporary pci_dev for
pci_match_device(), which calls device_match_driver_override(). That
depends on the driver_override.lock added by cb3d1049f4 ("driver core:
generalize driver_override in struct device").
The new driver_override.lock was not initialized in the temporary pci_dev,
resulting in this lockdep splat.
Initialize the temporary pci_dev to fix this.
Repro:
Build with CONFIG_LOCKDEP=y, boot with QEMU, and add a new ID:
# echo "8086 10f5" > /sys/bus/pci/drivers/e1000e/new_id
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 UID: 0 PID: 177 Comm: liveupdate-iomm Not tainted 7.0.0+ #9 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
register_lock_class+0x77e/0x790
lock_acquire+0xbf/0x2e0
pci_match_device+0x24/0x180
new_id_store+0x189/0x1d0
kernfs_fop_write_iter+0x14f/0x210
vfs_write+0x263/0x5e0
ksys_write+0x79/0xf0
do_syscall_64+0x117/0xf80
Fixes: 10a4206a24 ("PCI: use generic driver_override infrastructure")
Fixes: 8895d3bcb8 ("PCI: Fail new_id for vendor/device values already built into driver")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
[bhelgaas: add commit log details and repro, trim backtrace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260505234327.716630-1-skhawaja@google.com
Bernd reports passthrough failure of a Digital Devices Cine S2 V6 DVB
adapter plugged into an ASRock X570S PG Riptide board with BIOS version
P5.41 (09/07/2023):
ddbridge 0000:05:00.0: detected Digital Devices Cine S2 V6 DVB adapter
ddbridge 0000:05:00.0: cannot read registers
ddbridge 0000:05:00.0: fail
BIOS assigns an incorrect BAR to the DVB adapter which doesn't fit into the
upstream bridge window. The kernel corrects the BAR assignment:
pci 0000:07:00.0: BAR 0 [mem 0xfffffffffc500000-0xfffffffffc50ffff 64bit]: can't claim; no compatible bridge window
pci 0000:07:00.0: BAR 0 [mem 0xfc500000-0xfc50ffff 64bit]: assigned
Correction of the BAR assignment happens in an x86-specific fs_initcall,
pcibios_assign_resources(), after device enumeration in a subsys_initcall.
This order was introduced at the behest of Linus in 2004:
https://git.kernel.org/tglx/history/c/a06a30144bbc
No other architecture performs such a late BAR correction.
Bernd bisected the issue to commit a2f1e22390 ("PCI/ERR: Ensure error
recoverability at all times"), but it only occurs in the absence of commit
4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing").
This combination exists in stable kernel v6.12.70, but not in mainline,
hence Bernd cannot reproduce the issue with mainline.
Since a2f1e22390, config space is saved on enumeration, prior to BAR
correction. Upon passthrough, the corrected BAR is overwritten with the
incorrect saved value by:
vfio_pci_core_register_device()
vfio_pci_set_power_state()
pci_restore_state()
But only if the device's current_state is PCI_UNKNOWN, as it was prior to
commit 4d4c10f763. Since the commit, it is PCI_D0, which changes the
behavior of vfio_pci_set_power_state() to no longer restore the state
without saving it first.
Alexandre is reporting the same issue as Bernd, but in his case, mainline
is affected as well. The difference is that on Alexandre's system, the
host kernel binds a driver to the device which is unbound prior to
passthrough, whereas on Bernd's system no driver gets bound by the host
kernel.
Unbinding sets current_state to PCI_UNKNOWN in pci_device_remove(), so when
vfio-pci is subsequently bound to the device, pci_restore_state() is once
again called without invoking pci_save_state() first.
To robustly fix the issue, always update saved_config_space upon resource
assignment.
Reported-by: Bernd Schumacher <bernd@bschu.de>
Closes: https://lore.kernel.org/r/acfZrlP0Ua_5D3U4@eldamar.lan/
Reported-by: Alexandre N. <an.tech@mailo.com>
Closes: https://lore.kernel.org/r/dd3c3358-de0f-4a56-9c81-04aceaab4058@mailo.com/
Fixes: a2f1e22390 ("PCI/ERR: Ensure error recoverability at all times")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Bernd Schumacher <bernd@bschu.de>
Tested-by: Alexandre N. <an.tech@mailo.com>
Cc: stable@vger.kernel.org # v6.12+
Link: https://patch.msgid.link/febc3f354e0c1f5a9f5b3ee9ffddaa44caccf651.1776268054.git.lukas@wunner.de
Each queue in a multi queue group has a dedicated timestamp counter. Use
this QUEUE TIMESTAMP register to capture the start timestamp for the
job.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-23-umesh.nerlige.ramappa@intel.com
If a queue is currently active on the CS, query the QUEUE TIMESTAMP
register to get an up to date value of the runtime. To do so, ensure
that the primary queue is active and then check if the secondary queue
is executing on the CS.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-21-umesh.nerlige.ramappa@intel.com
We need to define more helpers that read engine ID specific register, so
move that logic outside of get_ctx_timestamp().
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-20-umesh.nerlige.ramappa@intel.com
In secondary queue LRCs, the QUEUE TIMESTAMP register is saved and
restored allowing us to view the individual queue run times. Add helpers
to read this value from the LRC.
BSpec: 73988
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-19-umesh.nerlige.ramappa@intel.com
For an LRC belonging to the secondary queue, in order to check if its
context group is active, we need to check the LRC of the primary queue.
In addition to that we want to compare the secondary queue position to
CSMQDEBUG register to check if the queue itself is active.
To do so, store primary LRC and position information in the LRC.
A note on references involved:
- In general the Queue takes a ref on its LRC.
- In addition, for multi-queue,
a. Primary Queue takes a ref for each Secondary LRC.
b. Each Secondary Queue takes a ref to the Primary Queue
In the current patch, each LRC in the queue group is storing a pointer
to primary LRC. Both primary and secondary LRCs are freed only when
primary queue is destroyed. At this time, all secondary queues are
already destroyed, so there is no one using secondary LRCs. We should be
good without taking any additional references.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-18-umesh.nerlige.ramappa@intel.com
xe exec queue code is using a check to see if a class of engines support
multi queue. This check is also needed by other code, so move it to
xe_gt and export it for others.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-17-umesh.nerlige.ramappa@intel.com
