Refactor returning the routes by adding a new function that essentially
does a memcopy and sets the number of the routes in the routing table.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a reference to the LINK_FREQ control and clarify the meaning of the
control as for C-PHY the matter is less obvious.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Remove kernel-doc comments from regular callback functions. These
comments have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The driver UAPI is mode-based, allowing the user to choose a mode from a
small list based on the output size. The vertical blanking is set based on
the mode, do the same for horizontal blanking so the frame rate obtained
is constant.
Additionally, it's best to use a known-good horizontal blanking value as
choosing the value freely may affect image quality. While the minimum
value may not be the best value for horizontal blanking, at least it is
constant rather than a minimum value of a different configuration.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The driver used the maximum frame length in lines value of 0xffff, but the
maximum appears to be 0xfffe instead. Fix it.
Fixes: 1283b3b8f8 ("media: i2c: Add driver for Sony IMX219 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The imx219 driver uses macros for denoting the size of the pixel array.
The values reflect the area of manufacturer-designated visible pixels,
reflect this in the naming by calling it "ACTIVE_AREA" instead of
"PIXEL_ARRAY".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
TC358768 has two ways to send DSI commands: 1) buffer the payload data
into registers (DSICMD_WDx), which supports up to 8 bytes of payload, 2)
buffer the payload data into the video buffer, which supports up to 1024
bytes of payload.
The driver currently supports method 1).
Add support for transmitting long DSI commands (more than 8 bytes, up to
1024 bytes) using the video buffer. This mode can only be used before
the actual video transmission is enabled, i.e. the initial configuration.
Original version from Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-7-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Sending long commands using the video buffer (to be implemented in
following patches) requires setting TC358768_DATAFMT and
TC358768_DSITX_DT registers for command transfer. The same registers
also need to be configured properly for video transfer.
The long commands will be sent between the bridge's pre_enable() and
enable(), and currently we configure the registers for video transfer in
pre_enable(). Thus, they would be overwritten by the long command
transfer code.
To prevent that from happening, set those registers for video transfer
in enable(), not in pre_enable().
Based on code from Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-6-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Currently the driver ignores MIPI_DSI_MODE_LPM and always uses HS mode.
Add code to enable HS mode in pre_enable() only if MIPI_DSI_MODE_LPM is
not set, and always enable HS mode in enable() for video transmission.
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-5-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The driver prints a warning if MIPI_DSI_CLOCK_NON_CONTINUOUS is set, and
falls back to continuous clock mode. This was added in commit
fbc5a90e82 ("drm/bridge: tc358768: Disable non-continuous clock mode").
However, there have been multiple changes to the driver since then, and
at least in my setup, non-continuous clock mode works: I can see an
image on the panel, and I can see the clock lanes being non-continuous
with an oscilloscope.
So, let's enable MIPI_DSI_CLOCK_NON_CONTINUOUS support.
Cc: Dmitry Osipenko <digetx@gmail.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-4-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Some registers can only be written indirectly, using DSI_CONFW register.
We don't have many uses for those registers (in fact, only DSI_CONTROL
is currently written), but the code to do those writes inline is a bit
confusing.
Add a new function, tc358768_confw_update_bits() which can be used to
write the bits indirectly. Only DSI_CONTROL is currently supported.
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-3-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Enable the pre_enable_prev_first flag on the tc358768 bridge to reverse
the pre-enable order, calling bridge pre_enable before panel prepare.
This ensures the bridge is ready before sending panel init commands in
the case of panels sending init commands in panel prepare function.
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-2-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
It's "DSI_MODE", not "DIS_MODE".
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-1-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The SMBus block transfer length data->block[0] is validated in
i2c_smbus_xfer_emulated() but that check runs too late for tracepoints
and is skipped entirely when the adapter provides a native smbus_xfer
implementation. This allows user-controlled oversized block lengths to
reach tracepoint memcpy calls and driver callbacks unchecked.
Add an early validation in __i2c_smbus_xfer() that rejects block
transfers whose caller-supplied length is zero or exceeds
I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback
runs. data->block[0] is filled in by the device on SMBus block reads,
so the check is scoped to operations where the length is actually
supplied by the caller. This is consistent with the existing -EINVAL
convention in the emulated path and protects all downstream consumers
at once: the smbus_write tracepoint, all native smbus_xfer driver
implementations, and the emulated path.
Two distinct bugs are fixed by this change:
Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h)
trace_smbus_write() fires before any validation and copies
data->block[0]+1 bytes into a 34-byte event buffer. With
block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221.
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530
Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91
Call Trace:
<TASK>
__asan_memcpy+0x23/0x80
trace_event_raw_event_smbus_write+0x27c/0x530
__i2c_smbus_xfer+0x43a/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c)
stub_xfer() implements .smbus_xfer directly and only clamps
block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With
block[0]=0xff and command=0 the loop accesses block[1+i] for
i up to 254, far past the 34-byte union.
UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44
index 34 is out of range for type '__u8 [34]'
Call Trace:
<TASK>
__ubsan_handle_out_of_bounds+0xd7/0x120
stub_xfer+0x1971/0x198f [i2c_stub]
__i2c_smbus_xfer+0x306/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN.
Fixes: 8a325997d9 ("i2c: Add message transfer tracepoints for SMBUS [ver #2]")
Fixes: 4710317891 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Fixes: 04826f5886 ("drm/bochs: Allocate DRM device in struct bochs_device")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
The <drm/drm_pciids.h> header only defines radeon_PCI_IDS which isn't
used in the mgag200 driver. So drop the useless include statement.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/b81a4830b3c287e9360197693a823a0dc72c674c.1777545446.git.u.kleine-koenig@baylibre.com
aml_spisg_setup_transfer() takes a non-NULL exdesc pointer; the
function dereferences exdesc unconditionally later in the body to
populate the SPI scatter-gather descriptors (tx_ccsg / rx_ccsg).
The sole caller, aml_spisg_transfer_one_message(), always passes a
valid pointer derived from kcalloc().
The "if (exdesc)" guard around the memset() at the start of the
function is therefore dead and misleading -- it suggests callers
may pass NULL when in fact they may not. smatch flags the
inconsistency:
drivers/spi/spi-amlogic-spisg.c:314 aml_spisg_setup_transfer()
error: we previously assumed 'exdesc' could be null (see line 261)
Drop the check; the unconditional memset matches the unconditional
dereferences elsewhere in the function and removes the inconsistency
that smatch reports.
No functional change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260506183513.482-1-sozdayvek@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add R9A08G046_IA55_PCLK to the critical module clocks list to prevent
the clock from being gated during suspend, as it is required for the
interrupt controller (IA55) to function correctly.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260430100838.157306-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add acpi match entries to support TI's tac5572,
tas2883, tac5672 and tac5682 on link 0 on MTL machine.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-5-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add TI amp utility for supporting the tac5xx2 family
of devices to support tac5572, tac5672, tac5682 and
tas2883
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-4-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add codec driver for tac5xx2 family of devices.
This includes the support for
1. tac5572 - DAC, PDM, UAJ and HID
2. tas2883 - Amplifier with DSP
3. tac5672 - Similar to tac5572 with feedback
4. tac5682 - Similar to tac5672 with Amplifier DSP.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-3-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement sdca_asoc_pde_ensure_ps() helper function to poll for PDE
power state transitions. Per SDCA specification, after writing
REQUESTED_PS, drivers must poll ACTUAL_PS until the target power state
is reached.
Changes include:
- Add sdca_asoc_pde_ensure_ps() to handle ACTUAL_PS polling with
support for device-specific delay tables or default intervals
- Export function via sdca_asoc.h for use by SDCA-compliant drivers
- Refactor entity_pde_event() in sdca_asoc.c to use the helper
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-2-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure.
Fixes: af316fc442 ("pefile: Digest the PE binary and compare to the PKCS#7 data")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert scatterwalk_map_and_copy to memcpy_to/from_sglist as they
are more readable and less error-prone.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AF_ALG is almost completely unnecessary, and it exposes a massive attack
surface that hasn't been standing up to modern vulnerability discovery
tools. The latest one even has its own website, providing a small
Python script that reliably roots most Linux distros: https://copy.fail/
This isn't sustainable, especially as LLMs have accelerated the rate the
vulnerabilities are coming in. The effort that is being put into this
thing is vastly disproportional to the few programs that actually use
it, and those programs would be better served by userspace code anyway.
These issues have been noted in many mailing list discussions already.
But until now they haven't been reflected in the documentation or
kconfig menu itself, and the vulnerabilities are still coming in.
Let's go ahead and document the deprecation.
This isn't intended to change anything overnight. After all, most Linux
distros won't be able to disable the kconfig options quite yet, mainly
because of iwd. But this should create a bit more impetus for these
userspace programs to be fixed, and the documentation update should also
help prevent more users from appearing.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 8006aff155 ("crypto: atmel-sha204a - Set hwrng quality to
lowest possible") reduced the hwrng quality to 1 based on a review by
Bill Cox [1]. However, despite its title, the review only tested the
ATSHA204, not the ATSHA204A.
In the same thread, Atmel engineer Landon Cox wrote "this behavior has
been eliminated entirely"[2] in the ATSHA204A and "this problem does not
affect the ATECC108 or the ATECC108A (or the ATSHA204A)"[3].
According to the official ATSHA204A datasheet [4], the device contains a
high-quality hardware RNG that combines its output with an internal seed
value stored in EEPROM or SRAM to generate random numbers. The device
also implements all security functions using SHA-256, and the driver
uses the chip's Random command in seed-update mode.
Keep 'quality = 1' for ATSHA204, but drop the explicit hwrng quality
reduction for ATSHA204A and fall back to the hwrng core default.
[1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
[2] https://www.metzdowd.com/pipermail/cryptography/2014-December/023852.html
[3] https://www.metzdowd.com/pipermail/cryptography/2014-December/023886.html
[4] https://ww1.microchip.com/downloads/en/DeviceDoc/ATSHA204A-Data-Sheet-40002025A.pdf
Fixes: 8006aff155 ("crypto: atmel-sha204a - Set hwrng quality to lowest possible")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use list_first_entry_or_null() to simplify starfive_cryp_find_dev() and
remove the now-unused local variable 'struct starfive_cryp_dev *tmp'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new helper omap_sham_unregister_algs() and replace two for loops
in omap_sham_probe() and omap_sham_remove(), which also ensure
->registered is reset to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new helper omap_des_unregister_algs() and replace two for loops in
omap_des_probe() and omap_des_remove(), which also ensure ->registered
is reset to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new helper omap_aes_unregister_algs() and replace two for loops in
omap_aes_probe() and omap_aes_remove(), which also ensure ->registered
is reset to 0.
Replace two additional for loops with crypto_engine_unregister_aeads()
while at it and reset ->registered to 0 explicitly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled.
Fixes: 8d818c1055 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Fixes: 226853ac3e ("crypto: caam/qi2 - add skcipher algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() and gen_split_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled.
Fixes: 6e00550319 ("crypto: caam - print debug messages at debug level")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Tested-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use a flexible array member to combine and simplify allocation.
Move struct mv_cesa_dev down as flexible array members require full
definitions.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document glymur compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When booted with fips=1, RSA signature generation using SHA-1 must not be
available. However, pkcs1pad(rsa,sha1) can currently be instantiated
because it is not present in alg_test_descs; alg_test() falls through the
no_test path and succeeds, after which the algorithm appears in
/proc/crypto as fips-capable.
Add explicit alg_test_descs entries for pkcs1pad(rsa,sha1) and
pkcs1(rsa,sha1) without marking them fips_allowed, so they are treated as
not FIPS-allowed when fips=1 is enabled.
Include both names to cover kernels where RSA sign/verify is provided via
the pkcs1(...) signature template, while pkcs1pad(...) remains for the
traditional wrapper naming and/or RSAES operations.
Signed-off-by: Jeff Barnes <jeffbarnes@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the sun4i-ss and sun8i-ce drivers started selecting CRYPTO_RNG,
the sun8i-ss variant does not, and causes a link failure:
aarch64-linux-ld: drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.o: in function `sun8i_ss_unregister_algs':
sun8i-ss-core.c:(.text.sun8i_ss_unregister_algs+0x94): undefined reference to `crypto_unregister_rng'
aarch64-linux-ld: drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.o: in function `sun8i_ss_probe':
sun8i-ss-core.c:(.text.sun8i_ss_probe+0x40c): undefined reference to `crypto_register_rng'
Looking more closely, I see that all of the allwinner crypto drivers have the
same logic where the rng and hash parts of the driver are optional, but then the
generic code is still selected, which is a bit inconsistent, aside from the
missing CRYPTO_RNG select on sun8i-ss.
Change the approach so only the bits that are actually used are built, using
ifdef checks around the optional portions that match the optional references
to the sub-drivers.
Ideally the drivers would get reworked in a way that keeps all the bits
related to the skcipher/ahash/rng codecs in the respective sub-drivers,
rather than having a common driver that knows about all of these.
Fixes: cdadc14359 ("crypto: cryptomgr - Select algorithm types only when CRYPTO_SELFTESTS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Newer versions of ARM TrustedFirmware-A on MediaTek's ARMv8 SoCs no longer
allow accessing the TRNG from outside of the trusted firmware.
Instead, a vendor-defined custom Secure Monitor Call can be used to
acquire random bytes.
Add support for newer SoCs (MT7981, MT7987, MT7988).
As TF-A for the MT7986 may either follow the old or the new
convention, the best bet is to test if firmware blocks direct access
to the hwrng and if so, expect the SMCC interface to be usable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add compatible strings for MediaTek SoCs where the hardware random number
generator is accessed via a vendor-defined Secure Monitor Call (SMC)
rather than direct MMIO register access:
- mediatek,mt7981-rng
- mediatek,mt7987-rng
- mediatek,mt7988-rng
These variants require no reg, clocks, or clock-names properties since
the RNG hardware is managed by ARM Trusted Firmware-A.
Relax the $nodename pattern to also allow 'rng' in addition to the
existing 'rng@...' pattern.
Add a second example showing the minimal SMC variant binding.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 4 spaces for each level indentation, remove unused label, and add
missing empty line between header include and body.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
