Commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself
in the fast path; it only reads struct sock, and struct socket
is only used for tunnel setup and teardown.
This applies to all other UDP tunnel users, and they have been
converted to access struct sock directly.
In addition, each device-specific struct used in their fast paths
is freed after one RCU grace period. Since this occurs after
udp_tunnel_sock_release(), the struct is guaranteed to be freed
after struct udp_sock.
Therefore, synchronize_rcu() in udp_tunnel_sock_release() is
now redundant.
Let's remove it.
Tested:
A script creating/upping vxlan devices in 4000 netns runs 10x
faster with this change. We can see the same improvement with
other UDP tunnel devices as well.
$ cat vxlan.sh
for i in `seq 1 40`
do
(for j in `seq 1 100` ; do
unshare -n bash -c "ip link add vxlan0 type vxlan id 100 local 127.0.0.1 dstport 4789 && ip link set vxlan0 up";
done) &
done
wait
With bpftrace, we can see vxlan_stop() is significantly faster.
bpftrace -e '
kprobe:vxlan_stop {
@start[tid] = nsecs;
}
kretprobe:vxlan_stop /@start[tid]/ {
@duration_us = hist((nsecs - @start[tid]) / 1000);
delete(@start[tid]);
}
END {
printf("\nExecution time of vxlan_stop (us):\n");
}'
Before:
# time ./vxlan.sh // without bpftrace
real 0m50.615s
user 0m8.171s
sys 1m45.101s
@duration_us:
[4K, 8K) 1266 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8K, 16K) 1957 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[16K, 32K) 764 |@@@@@@@@@@@@@@@@@@@@ |
[32K, 64K) 6 | |
[64K, 128K) 4 | |
[128K, 256K) 3 | |
After:
# time ./vxlan.sh // without bpftrace
real 0m5.247s
user 0m7.956s
sys 1m47.404s
@duration_us:
[16, 32) 3411 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32, 64) 383 |@@@@@ |
[64, 128) 107 |@ |
[128, 256) 79 |@ |
[256, 512) 16 | |
[512, 1K) 2 | |
[1K, 2K) 2 | |
Next step is to remove another synchronize_net() in vxlan_stop()
and variants in other devices.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-16-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc udp_bearer does not need to access struct socket itself in
the fast path; it only reads struct sock, and struct socket is
only used for tunnel setup and teardown.
Let's store struct sock directly in struct udp_bearer.
Note that cleanup_bearer() calls synchronize_net() after
udp_tunnel_sock_release(), so udp_bearer is not freed until
inflight fast paths finish.
Note also that synchronize_rcu() is added in the error path
of tipc_udp_enable() since udp_bearer will be kfree()d
immediately once we remove synchronize_rcu() in
udp_tunnel_sock_release().
This can be later converted to kfree_rcu().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pfcp does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct pfcp_dev.
pfcp_del_sock() is called from dev->netdev_ops->ndo_uninit().
The 2nd synchronize_net() in unregister_netdevice_many_notify()
ensures that inflight pfcp RX fast paths finish before pfcp_dev
is freed.
Note that synchronize_rcu() is added in the error path of
pfcp_newlink() since free_netdev() will free pfcp_dev immediately
once we remove synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt does not need to access struct socket itself in the fast path;
it only reads struct sock, and struct socket is only used for tunnel
setup and teardown.
Let's store struct sock directly in struct amt.
amt_dev_stop() is called as dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight amt RX fast paths finish before amt_dev is freed.
amt no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that amt_dev_stop() looks buggy; cancel_delayed_work_sync()
should be called after udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fou does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct fou.
fou_release() frees struct fou with kfree_rcu(), so fou no
longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that the error path in fou_create() looks buggy; once the
tunnel is set up and fou_add_to_port_list() fails, struct fou
should be freed with kfree_rcu() _after_ udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bareudp does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct bareudp_dev.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures that
inflight bareudp RX fast paths finish before bareudp_dev is freed.
bareudp no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
geneve does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used for
tunnel setup and teardown.
Let's store struct sock directly in struct geneve_sock.
__geneve_sock_release() frees geneve_sock with kfree_rcu(), so
geneve no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will remove synchronize_rcu() in udp_tunnel_sock_release().
We must ensure that vxlan_sock is freed after inflight RX fast path.
Let's free vxlan_sock with kfree_rcu().
Note that vxlan_sock.vni_list[] is 8K and struct rcu_head must
be placed before it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself in the
fast path; it only reads struct sock, and struct socket is only
used for tunnel setup and teardown.
Let's store struct sock directly in struct vxlan_sock.
In the next patch, we will free vxlan_sock with kfree_rcu(), then
vxlan no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_tunnel_sock_release() could set sk->sk_user_data to NULL
while vxlan_gro_prepare_receive() is running.
Let's check if rcu_dereference_sk_user_data() is NULL after
skb_gro_remcsum_init().
Fixes: 5602c48cf8 ("vxlan: change vxlan to use UDP socket GRO")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_notify_{add,del}_rx_port() do not need
struct socket.
Let's change udp_tunnel_notify_{add,del}_rx_port() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_{push,drop}_rx_port() do not need struct socket.
Let's change udp_tunnel_{push,drop}_rx_port() to take struct
sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel6_dst_lookup() does not need struct socket.
Let's change udp_tunnel6_dst_lookup() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi says:
====================
bnxt_en: Bug fixes
This patchset adds the following fixes for bnxt:
Patch #1 fixes DPC AER handling to make it more reliable
Patch #2 fixes incorrect capping bp->max_tpa based on what the FW
supports
Patch #3 fixes ignoring of VNIC configuration result when RDMA
driver is loading
Patch #4 fixes logic to make phase adjustment on the PPS OUT signal
====================
Link: https://patch.msgid.link/20260504083611.1383776-1-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to calculate the target PHC cycles required
to make phase adjustment on the PPS OUT signal. This is because
the application supplies absolute n_sec value in the future and
is already the actual desired target value.
Remove the unnecessary code.
Fixes: 9e518f2580 ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260504083611.1383776-5-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the bnxt RDMA driver is loaded, it calls bnxt_register_dev().
As part of this, driver sends HWRM_VNIC_CFG firmware command
to configure the VNIC to operate in dual VNIC mode. Currently
the driver ignores the result of this firmware command. The RDMA
driver must know the result since it affects its functioning.
Check return value of call to bnxt_hwrm_vnic_cfg() in
bnxt_register_dev() and return failure on error.
Fixes: a588e4580a ("bnxt_en: Add interface to support RDMA driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the logic to set bp->max_tpa no higher than what the FW supports.
On P5 chips, some older FW sets max_tpa very low so we override it to
prevent performance regressions with the older FW.
Fixes: 79632e9ba3 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-3-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FW on all chips is requiring a 5-second delay after Downstream
Port Containment (DPC) AER. The previously added 900 msec delay was
not long enough in all cases because the chip's CRS (Configuration
Request Retry Status) mechanism is not always reliable.
Fixes: d5ab32e9b0 ("bnxt_en: Add delay to handle Downstream Port Containment (DPC) AER")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-2-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This basically defaulted to m until recently, since IPV6 defaulted to
m. Since IPV6 was changed to a boolean with a default of y, IPV6_SIT
started defaulting to built-in as well. This results in a surprise
sit0 device by default for defconfig (and defconfig-derived config)
users at boot. For me, this broke an (admittedly non-robust) script.
Preserve the behaviour of most configs by avoiding building this
module, that's probably overall seldom used compared to IPv6 as a
whole, into the kernel.
Fixes: 309b905dee ("ipv6: convert CONFIG_IPV6 to built-in only and clean up Kconfigs")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260503192515.290900-2-hi@alyssa.is
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
-----BEGIN PGP SIGNATURE-----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=T0tH
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
The engine state size reported to GuC via ADS should only include the
engine state portion and should not include the indirect ring state page
that comes after it in the context image. The GuC uses this size to
overwrite the engine state in the LRC on watchdog resets and we don't
want it to overwrite the indirect ring state as well.
Fixes: d6219e1cd5 ("drm/xe: Add Indirect Ring State support")
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260504094924.3760713-4-satyanarayana.k.v.p@intel.com
(cherry picked from commit 3ec5f003f6)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
pf_migration_mmio_save() and pf_migration_mmio_restore() initialize a
local VF-specific MMIO view via xe_mmio_init_vf_view() but then pass
>->mmio (the PF base) to all xe_mmio_read32()/xe_mmio_write32()
calls instead of the local &mmio. This causes the PF own SW flag
registers to be saved/restored rather than the target VF registers,
silently corrupting migration state.
Use the VF MMIO view for all register accesses, matching the correct
pattern used in pf_clear_vf_scratch_regs().
Fixes: b7c1b990f7 ("drm/xe/pf: Handle MMIO migration data as part of PF control")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260429192259.4009211-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 7d9c39cfb3)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
PTR_ERR() returns a negative value, so comparing against the positive
EAGAIN is always true for ERR_PTR(-EAGAIN), causing pf_migration_consume()
to bail out instead of continuing to the remaining GTs. On multi-GT
platforms this can skip GTs that already have data ready.
Compare against -EAGAIN to match the intent (and the following line
that correctly uses -EAGAIN). While at it, gate PTR_ERR() with
IS_ERR().
v2: add IS_ERR() guard before PTR_ERR(). (Gustavo)
Fixes: 67df4a5cbc ("drm/xe/pf: Add data structures and handlers for migration rings")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260428201448.3999428-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 9d770e72e1)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
When media GT is disabled via configfs, there is no allocation for
media_gt, which is kept as NULL. In such scenario,
intel_hdcp_gsc_check_status() results in a kernel pagefault error due to
>->uc.gsc being evaluated as an invalid memory address.
Fix that by introducing a NULL check on media_gt and bailing out early
if so.
While at it, also drop the NULL check for gsc, since it can't be NULL if
media_gt is not NULL.
v2:
- Get address for gsc only after checking that gt is not NULL.
(Shuicheng)
- Drop the NULL check for gsc. (Shuicheng)
v3:
- Add "Fixes" and "Cc: <stable...>" tags. (Matt)
Fixes: 4af50beb4e ("drm/xe: Use gsc_proxy_init_done to check proxy status")
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260416-check-for-null-media_gt-in-intel_hdcp_gsc_check_status-v2-1-9adb9fd3b621@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
(cherry picked from commit bfaf87e84c)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
- Fix devm_alloc_workqueue() passing a va_list as a positional arg to the
variadic alloc_workqueue() macro, which garbled wq->name and skipped
lockdep init on the devm path. Fold both noprof entry points onto a
va_list helper. Also, annotate __printf(1, 0).
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCafpheA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGeBeAQDKq3XmN45CaOB76k9wSmRYqVgTSoWWTL83O8km
nC2UhQEAiJBfqhP586coXyK6saaZX9QwFdPzTcB72LhZSAj13gQ=
=Zixt
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix devm_alloc_workqueue() passing a va_list as a positional arg to
the variadic alloc_workqueue() macro, which garbled wq->name and
skipped lockdep init on the devm path. Fold both noprof entry points
onto a va_list helper.
Also, annotate it using __printf(1, 0)
* tag 'wq-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Annotate alloc_workqueue_va() with __printf(1, 0)
workqueue: fix devm_alloc_workqueue() va_list misuse
- During v6.19, cgroup task unlink was moved from do_exit() to after the
final task switch to satisfy a controller invariant. That left the kernel
seeing tasks past exit_signals() longer than userspace expected, and
several v7.0 follow-ups tried to bridge the gap by making rmdir wait for
the kernel side. None held up. The latest is an A-A deadlock when rmdir
is invoked by the reaper of zombies whose pidns teardown the rmdir itself
is waiting on, which points at the synchronizing approach being
fundamentally wrong:
- Take a different approach: drop the wait, leave rmdir's user-visible
side returning as soon as cgroup.procs is empty, and defer the css
percpu_ref kill that drives ->css_offline() until the cgroup is fully
depopulated.
- Tagged for stable. Somewhat invasive but contained. The hope is that
fixing forward sticks. If not, the fallback is to revert the entire
chain and rework on the development branch.
- Doesn't plug a pre-existing analogous race in
cgroup_apply_control_disable() (controller disable via subtree_control).
Not a regression. The development branch will do the more invasive
restructuring needed for that.
- Documentation update for cgroup-v1 charge-commit section that still
referenced functions removed when the memcg hugetlb try-commit-cancel
protocol was retired.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCafphbw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbydAQDxlEIeJPdJlwbU6X4PBW/7DYeDHABG7OdrFf5K
Fq4ECAD/ZHsFyCNEOcZym6t2/FCZR0xbaPGQibLt3er6AkLRFwM=
=3Jra
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- During v6.19, cgroup task unlink was moved from do_exit() to after the
final task switch to satisfy a controller invariant. That left the kernel
seeing tasks past exit_signals() longer than userspace expected, and
several v7.0 follow-ups tried to bridge the gap by making rmdir wait for
the kernel side. None held up.
The latest is an A-A deadlock when rmdir is invoked by the reaper of
zombies whose pidns teardown the rmdir itself is waiting on, which
points at the synchronizing approach being fundamentally wrong.
Take a different approach: drop the wait, leave rmdir's user-visible
side returning as soon as cgroup.procs is empty, and defer the css
percpu_ref kill that drives ->css_offline() until the cgroup is fully
depopulated.
Tagged for stable. Somewhat invasive but contained. The hope is that
fixing forward sticks. If not, the fallback is to revert the entire
chain and rework on the development branch.
Note that this doesn't plug a pre-existing analogous race in
cgroup_apply_control_disable() (controller disable via
subtree_control). Not a regression. The development branch will do
the more invasive restructuring needed for that.
- Documentation update for cgroup-v1 charge-commit section that still
referenced functions removed when the memcg hugetlb try-commit-cancel
protocol was retired.
* tag 'cgroup-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: Update charge-commit section
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
- Fix idle CPU selection returning prev_cpu outside the task's cpus_ptr
when the BPF caller's allowed mask was wider. Stable backport.
- Two opposite-direction gaps in scx_task_iter's cgroup-scoped mode
versus the global mode:
- Tasks past exit_signals() are filtered by the cgroup walk but kept by
global. Sub-scheduler enable abort leaked __scx_init_task() state.
Add a CSS_TASK_ITER_WITH_DEAD flag to cgroup's task iterator
(scx_task_iter is its only user) and use it.
- Tasks past sched_ext_dead() are still returned, tripping
WARN_ON_ONCE() in callers or making them touch torn-down state. Mark
and skip under the per-task rq lock.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCafphXA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbI/AP4nRHDusUuYDSFBLyHODvLZXfMM3Nb0yzS7euQJ
qvx6OQEA1p5AyRWA2apFvKjjQrl1dOb5vUlro1Fj8VF51X7Spwc=
=olGB
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix idle CPU selection returning prev_cpu outside the task's cpus_ptr
when the BPF caller's allowed mask was wider. Stable backport.
- Two opposite-direction gaps in scx_task_iter's cgroup-scoped mode
versus the global mode:
- Tasks past exit_signals() are filtered by the cgroup walk but kept
by global. Sub-scheduler enable abort leaked __scx_init_task()
state. Add a CSS_TASK_ITER_WITH_DEAD flag to cgroup's task
iterator (scx_task_iter is its only user) and use it.
- Tasks past sched_ext_dead() are still returned, tripping
WARN_ON_ONCE() in callers or making them touch torn-down state.
Mark and skip under the per-task rq lock.
* tag 'sched_ext-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Recheck prev_cpu after narrowing allowed mask
sched_ext: Skip past-sched_ext_dead() tasks in scx_task_iter_next_locked()
cgroup, sched_ext: Include exiting tasks in cgroup iter
All in drivers. The largest change is the ufs one which has to
introduce a new function to check the power state before doing the
update and the most widely encountered one is the obvious change to sg
to not use GFP_ATOMIC.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCafpc1xsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUGSgEA7UBQbSsaUO3ikG6BjXw9ter8VMEcqMg5
qRFgGYFCnTYA/iiiYJsm2/WBIpyUgOaIioSdm4rCuq/vNhaJo87q5MCM
=tBNu
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All in drivers.
The largest change is the ufs one which has to introduce a new
function to check the power state before doing the update and the most
widely encountered one is the obvious change to sg to not use
GFP_ATOMIC"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: reject invalid size Extended CDB AHS
scsi: ufs: core: Fix bRefClkFreq write failure in HS-LSS mode
scsi: hisi_sas: Fix sparse warnings in prep_ata_v3_hw()
scsi: pmcraid: Fix typo in comments
scsi: scsi_dh_alua: Increase default ALUA timeout to maximum spec value
scsi: smartpqi: Silence a recursive lock warning
scsi: mpt3sas: Limit NVMe request size to 2 MiB
scsi: sg: Don't use GFP_ATOMIC in sg_start_req()
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
- Fix rotating fonts by 180 degrees [Thomas Zimmermann]
- Drop duplicate include of linux/module.h in fb_defio [Chen Ni]
- Add vm_ops in udlfb to prevent use-after-free [Rajat Gupta]
- ipu-v3: clean up kernel-doc warnings [Randy Dunlap]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCafpViwAKCRD3ErUQojoP
X503AQCoi8Lq/xUAYzVq7xsoGrqBzkIjJ7x+OkVUCdmsuWRQIAEA8tjtzN6ZUdo7
cJMadOEen9zyLN3qpksqID4sVA//FwM=
=T+Gn
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Four small patches for fbdev, of which two are important: One fixes
the bitmap font generation and the other prevents a possible
use-after-free in udlfb:
- Fix rotating fonts by 180 degrees (Thomas Zimmermann)
- Drop duplicate include of linux/module.h in fb_defio (Chen Ni)
- Add vm_ops in udlfb to prevent use-after-free (Rajat Gupta)
- ipu-v3: clean up kernel-doc warnings (Randy Dunlap)"
* tag 'fbdev-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free
lib/fonts: Fix bit position when rotating by 180 degrees
fbdev: defio: Remove duplicate include of linux/module.h
fbdev: ipu-v3: clean up kernel-doc warnings
Add #io-channel-cells property to the ADC node. This property is required
for an IIO consumer driver to work.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Currently sel_write_load() takes the policy mutex earlier than
necessary. Move the taking of the mutex later. This avoids
holding it unnecessarily across the vmalloc() and copy_from_user()
of the policy data.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
MMU-700 supports TCU PMU and TBU PMU. There are one TCU PMU and
11 TBU PMUs, add them all.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Update SMMU reg size to 0x40000, because MMU-700 TCU occupies 4 pages with
each page 64KB and the last page is reserved.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Support Mali G310 GPU on i.MX952 board. Describe this GPU in the DT.
Include dummy GPU voltage regulator and OPP tables.
A hardware GPU auto clock‑gating mechanism has been introduced, enabling
GPUMIX to automatically manage the GPU clock. This improves overall
response time.
Signed-off-by: Guangliu Ding <guangliu.ding@nxp.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Currently there can only be a single open of /sys/fs/selinux/policy at
any time. This allows any process to block any other process from
reading the kernel policy. The original motivation seems to have been
a mix of preventing an inconsistent view of the policy size and
preventing userspace from allocating kernel memory without bound, but
this is arguably equally bad. Eliminate the policy_opened flag and
shrink the critical section that the policy mutex is held. While we
are making changes here, drop a couple of extraneous BUG_ONs.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/selinux/20100726193414.19538.64028.stgit@paris.rdu.redhat.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add device tree support for the Variscite Symphony carrier board with
the VAR-SOM-MX91 system on module.
The Symphony board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart, ADC and I2C interfaces
- GPIO Expanders
- RTC module
- TPM module
- CAN peripheral
Link: https://variscite.com/carrier-boards/symphony-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add device tree support for the Variscite VAR-SOM-MX91 system on module.
This SOM is designed to be used with various carrier boards.
The module includes:
- NXP i.MX91 MPU processor
- Up to 2GB of LPDDR4 memory
- Up to 128GB of eMMC storage memory
- Integrated 10/100/1000 Mbps Ethernet Transceiver
- Codec audio WM8904
- WIFI6 dual-band 802.11ax/ac/a/b/g/n with optional 802.15.4 and Bluetooth
Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.
Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-91/var-som-mx91/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add DT compatible strings for Variscite VAR-SOM-MX91 SoM and Symphony
development carrier Board.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This reverts commit 39e4189d9d.
The board uses SDHC VSELECT to automatically switch between 1.8v and
3.3v. It does not use GPIO to control the PMIC SD_VSEL signal.
The original commit intends to read back SD_VSEL value from GPIO,
but it is wrong. When MUX is configured as SDHC VSELECT, it is
impossible to read back the value from GPIO controller. Setting SION
could only enable the input path for the mux function. It could not
redirect the input to GPIO.
Fixes: 39e4189d9d ("arm64: dts: imx8mp-kontron: Add support for reading SD_VSEL signal")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This reverts commit 8472751c4d.
The board uses SDHC VSELECT to automatically switch between 1.8v and
3.3v. It does not use GPIO to control the PMIC SD_VSEL signal.
The original commit intends to read back SD_VSEL value from GPIO,
but it is wrong. When MUX is configured as SDHC VSELECT, it is
impossible to read back the value from GPIO controller. Setting SION
could only enable the input path for the mux function. It could not
redirect the input to GPIO.
And value "0x40000d0" is wrong, SION is BIT30, not BIT26.
Fixes: 8472751c4d ("arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The PHYTEC phyBOARD Pollux comes with a HDMI port on the base board.
Add the required device-tree nodes to enable support for it, including
both the video and the audio paths.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove the previously deprecated /sys/fs/selinux/user interface aside
from a residual stub for userspace compatibility.
Commit d7b6918e22 ("selinux: Deprecate /sys/fs/selinux/user") started
the deprecation process for /sys/fs/selinux/user:
The selinuxfs "user" node allows userspace to request a list
of security contexts that can be reached for a given SELinux
user from a given starting context. This was used by libselinux
when various login-style programs requested contexts for
users, but libselinux stopped using it in 2020.
Kernel support will be removed no sooner than Dec 2025.
A pr_warn() message has been in place since Linux v6.13, and a 5
second sleep was introduced since Linux v6.17 to help make it more
noticeable.
We are now past the stated deadline of Dec 2025, so remove the
underlying functionality and replace it with a stub that returns a
'0\0' buffer to avoid breaking userspace. This also avoids a local DoS
from logspam and an uninterruptible sleep delay.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit f22f9aaf6c ("selinux: remove the runtime disable
functionality") removed the underlying SELinux runtime disable
functionality but left everything else intact and started logging an
error message to warn any residual users.
Prune it to just log an error message once and to return count
(i.e. all bytes written successfully) to avoid breaking
userspace. This also fixes a local DoS from logspam.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit a7e4676e8e ("selinux: remove the 'checkreqprot'
functionality") removed the ability to modify the checkreqprot setting
but left everything except the updating of the checkreqprot value
intact. Aside from unnecessary processing, this could produce a local
DoS from log spam and incorrectly calls selinux_ima_measure_state() on
each write even though no state has changed. Prune it to just log an
error message once and return count (i.e. all bytes written
successfully) so that userspace never breaks.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 => IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted the
same logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Fixes: bf68c18150 ("arm64: dts: imx8mp-ab2: add support for NXP i.MX8MP audio board (version 2)")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 => IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted the
same logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Fixes: 5eb7405db9 ("arm64: dts: imx8mn: Add ifm VHIP4 EvalBoard v1 and v2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
