In subflow_finish_connect(), HMAC validation of the server's HMAC
in SYN/ACK + MP_JOIN increments MPTCP_MIB_JOINACKMAC ("HMAC was
wrong on ACK + MP_JOIN") on failure. The function processes the
SYN/ACK, not the ACK; the matching MPTCP_MIB_JOINSYNACKMAC counter
("HMAC was wrong on SYN/ACK + MP_JOIN") exists but is not
incremented anywhere in the tree.
The mirror site on the server, subflow_syn_recv_sock(), already
uses JOINACKMAC correctly for ACK HMAC failure. Use JOINSYNACKMAC
at the SYN/ACK validation site so each counter reflects the packet
whose HMAC actually failed.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-1-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a CVM environment, hardware responses cannot be trusted. The
GDMA_QUERY_MAX_RESOURCES command returns resource limits used to
determine the maximum number of queues.
In mana_gd_query_max_resources(), gc->max_num_queues is initialized
from num_online_cpus() and successively clamped by the hardware-reported
max_eq, max_cq, max_sq, max_rq, and num_msix_usable values. If any of
these hardware values is zero, gc->max_num_queues becomes zero and the
function returns success. This leads to a confusing failure later when
alloc_etherdev_mq() is called with zero queues, returning NULL and
producing a misleading -ENOMEM error.
Add an explicit zero check for gc->max_num_queues after all clamping
steps and return -ENOSPC for a clear early failure, consistent with the
existing gc->num_msix_usable <= 1 guard.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20260430083627.1873757-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a part of MANA hardening for CVM, validate that max_num_sq and
max_num_rq returned by MANA_QUERY_VPORT_CONFIG are not zero. These
values flow into apc->num_queues, which is used as an allocation count
and loop bound. A zero value would result in zero-size allocations and
incorrect driver behavior.
Return -EPROTO if either value is zero.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260430085638.1875400-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc.
virtio_transport_recv_enqueue() skips coalescing for packets
with VIRTIO_VSOCK_SEQ_EOM.
If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM,
a very large number of packets can be queued
because vvs->rx_bytes stays at 0.
Fix this by estimating the skb metadata size:
(Number of skbs in the queue) * SKB_TRUESIZE(0)
Fixes: 0777061657 ("virtio/vsock: don't use skbuff state to account credit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Eugenio Pérez" <eperezma@redhat.com>
Cc: virtualization@lists.linux.dev
Link: https://patch.msgid.link/20260430122653.554058-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ujjal Roy says:
====================
net: bridge: mcast: support exponential field encoding
Description:
This series addresses a mismatch in how multicast query
intervals and response codes are handled across IPv4 (IGMPv3)
and IPv6 (MLDv2). While decoding logic currently exists,
the corresponding encoding logic is missing during query
packet generation. This leads to incorrect intervals being
transmitted when values exceed their linear thresholds.
The patches introduce a unified floating-point encoding
approach based on RFC3376 and RFC3810, ensuring that large
intervals are correctly represented in QQIC and MRC fields
using the exponent-mantissa format.
Key Changes:
* ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation
Removes legacy macros in favor of a cleaner, unified
calculation for retrieving intervals from encoded fields,
improving code maintainability.
* ipv6: mld: rename mldv2_mrc() and add mldv2_qqi()
Standardizes MLDv2 terminology by renaming mldv2_mrc()
to mldv2_mrd() (Maximum Response Delay) and introducing
a new API mldv2_qqi for QQI calculation, improving code
readability.
* ipv4: igmp: encode multicast exponential fields
Introduces the logic to dynamically calculate the exponent
and mantissa using bit-scan (fls). This ensures QQIC and
MRC fields (8-bit) are properly encoded when transmitting
query packets with intervals that exceed their respective
linear threshold value of 128 (for QQI/MRT).
* ipv6: mld: encode multicast exponential fields
Applies similar encoding logic for MLDv2. This ensures
QQIC (8-bit) and MRC (16-bit) fields are properly encoded
when transmitting query packets with intervals that exceed
their respective linear thresholds (128 for QQI; 32768
for MRD).
* selftests: net: bridge: add MRC and QQIC field encoding tests
Updates bridge selftests to validate both linear and non-linear
(exponential) encoding for MRC and QQIC fields, ensuring
protocol compliance across IGMPv3 and MLDv2.
Impact:
These changes ensure that multicast queriers and listeners
stay synchronized on timing intervals, preventing protocol
timeouts or premature group membership expiration caused
by incorrectly formatted packet headers.
====================
Link: https://patch.msgid.link/20260502131907.987-1-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance vlmc_query_intvl_test and vlmc_query_response_intvl_test in
bridge_vlan_mcast.sh to validate IGMPv3/MLDv2 protocol compliance for
MRC and QQIC field encoding across both linear and exponential ranges.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Number of tagged IGMPv2 general query [ OK ]
TEST: IGMPv3 QQIC linear value 60(s) [ OK ]
TEST: MLDv2 QQIC linear value 60(s) [ OK ]
TEST: IGMPv3 QQIC non linear value 160(s) [ OK ]
TEST: MLDv2 QQIC non linear value 160(s) [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: IGMPv3 MRC linear value of 60(x0.1s) [ OK ]
TEST: MLDv2 MRC linear value of 24000(ms) [ OK ]
TEST: IGMPv3 MRC non linear value of 240(x0.1s) [ OK ]
TEST: MLDv2 MRC non linear value of 48000(ms) [ OK ]
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-6-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In MLD, MRC and QQIC fields are not correctly encoded when
generating query packets. Since the receiver of the query
interprets these fields using the MLDv2 floating-point
decoding logic, any value that exceeds the linear threshold
is incorrectly parsed as an exponential value, leading to
an incorrect interval calculation.
Encode and assign the corresponding protocol fields during
query generation. Introduce the logic to dynamically
calculate the exponent and mantissa using bit-scan (fls).
This ensures MRC (16-bit) and QQIC (8-bit) fields are
properly encoded when transmitting query packets with
intervals that exceed their respective linear thresholds
(32768 for MRD; 128 for QQI).
RFC3810: If Maximum Response Code >= 32768, the Maximum
Response Code field represents a floating-point value as
follows:
0 1 2 3 4 5 6 7 8 9 A B C D E F
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC3810: If QQIC >= 128, the QQIC field represents a
floating-point value as follows:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-5-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In IGMP, MRC and QQIC fields are not correctly encoded
when generating query packets. Since the receiver of the
query interprets these fields using the IGMPv3 floating-
point decoding logic, any value that exceeds the linear
threshold is incorrectly parsed as an exponential value,
leading to an incorrect interval calculation.
Encode and assign the corresponding protocol fields during
query generation. Introduce the logic to dynamically
calculate the exponent and mantissa using bit-scan (fls).
This ensures MRC and QQIC fields (8-bit) are properly
encoded when transmitting query packets with intervals
that exceed their respective linear threshold value of
128 (for MRT/QQI).
RFC3376: for both MRC and QQIC, values >= 128 represent
the same floating-point encoding as follows:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-4-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename mldv2_mrc() to mldv2_mrd() as it is used to calculate
the Maximum Response Delay from the Maximum Response Code.
Introduce a new API mldv2_qqi() to define the existing
calculation logic of QQI from QQIC. This also organizes
the existing mld_update_qi() API.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-3-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get rid of the IGMPV3_MRC macro and use the igmpv3_mrt() API to
calculate the Max Resp Time from the Maximum Response Code.
Similarly, for IGMPV3_QQIC, use the igmpv3_qqi() API to calculate
the Querier's Query Interval from the QQIC field.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-2-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e0bffe3e68 ("net: asix: ax88772: migrate to phylink") replaced
the asix_adjust_link() PHY callback with phylink's mac_link_up() and
mac_link_down() handlers, but did not carry over the usbnet_link_change()
notification that commit 805206e66f ("net: asix: fix "can't send until
first packet is send" issue") had added.
As a result, the original symptom returns: when the link comes up,
usbnet is never notified, so the RX URB submission stays dormant until
some other event (e.g. a transmitted packet triggering the status
endpoint interrupt) wakes it up.
This is reproducible with the Apple A1277 USB Ethernet Adapter
(05ac:1402, AX88772A based) on a Banana Pro using a static IPv4
configuration. After bringing the interface up, no incoming packets are
received until the first outgoing frame triggers usbnet's RX path.
Restore the link change notification, gated on a carrier transition so
the call remains idempotent if the status endpoint also reports the
change later.
Fixes: e0bffe3e68 ("net: asix: ax88772: migrate to phylink")
Signed-off-by: Markus Baier <Markus.Baier@soslab.tu-darmstadt.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260501163941.107668-1-Markus.Baier@soslab.tu-darmstadt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: Convert AF_NETLINK and AF_VSOCK to getsockopt_iter API
Continue the work to convert protocols to the new getsockopt_iter API.
Convert AF_NETLINK and AF_VSOCK getsockopt implementations to the new
sockopt_t/getsockopt_iter API, and add kselftests that verify the size
and errno semantics are preserved across the conversion.
I chose these two socket families because they are probably one of the
most used protocols,, ensuring that any potential bugs will be
discovered and reported quickly.
====================
Link: https://patch.msgid.link/20260501-getsock_one-v1-0-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a single kselftest covering the proto_ops getsockopt_iter
conversions for AF_NETLINK and AF_VSOCK, using one fixture per protocol:
netlink:
NETLINK_PKTINFO covers the flag-style int path (exact size, oversize
clamp, undersize -EINVAL); NETLINK_LIST_MEMBERSHIPS covers the
size-discovery path that always reports the required buffer length back
via optlen, even when the user buffer is too small to receive any group
bits.
vsock:
SO_VM_SOCKETS_BUFFER_SIZE covers the u64 path (exact size, oversize
clamp, undersize -EINVAL).
Each fixture also exercises an unknown optname and a bogus level so
the returned-length / errno semantics preserved by the sockopt_t
conversion are pinned down.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-3-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert AF_VSOCK's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t. The single
vsock_connectible_getsockopt() callback is shared by both
vsock_stream_ops and vsock_seqpacket_ops, so both proto_ops are
updated to use .getsockopt_iter.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-2-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert AF_NETLINK's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- For NETLINK_LIST_MEMBERSHIPS: walk the groups bitmap and emit each
u32 sequentially via copy_to_iter(), then set opt->optlen to the
total size required (ALIGN(BITS_TO_BYTES(ngroups), sizeof(u32))).
The wrapper writes opt->optlen back to userspace even on partial
failure, preserving the existing API that lets userspace discover
the needed allocation size.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-1-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add soundcard bindings for the MT8196 SoC with the NAU8825 audio codec.
Signed-off-by: Darren Ye <darren.ye@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cyril Chao <Cyril.Chao@mediatek.com>
Link: https://patch.msgid.link/20260430022417.32282-10-Cyril.Chao@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8196 audio AFE.
Signed-off-by: Darren Ye <darren.ye@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cyril Chao <Cyril.Chao@mediatek.com>
Link: https://patch.msgid.link/20260430022417.32282-8-Cyril.Chao@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add header files for register definitions and structures.
Signed-off-by: Darren Ye <darren.ye@mediatek.com>
Signed-off-by: Cyril Chao <Cyril.Chao@mediatek.com>
Link: https://patch.msgid.link/20260430022417.32282-3-Cyril.Chao@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mofify the pcm pointer interface to support 64-bit address access.
Signed-off-by: Darren Ye <darren.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Cyril Chao <Cyril.Chao@mediatek.com>
Link: https://patch.msgid.link/20260430022417.32282-2-Cyril.Chao@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a simple ASoC machine driver that wires the MT2701/MT7623N
AFE HDMI playback path to the on-chip HDMI transmitter exposed
as a generic hdmi-audio-codec "i2s-hifi" DAI.
The driver binds to "mediatek,mt2701-hdmi-audio". MT7623N device
trees carry "mediatek,mt7623n-hdmi-audio" as a board-specific
fallback, matching the dt-binding.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/1dafc8147ee09d44de53b69bca792bdbfe13e8b0.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the MT2701/MT7623N AFE driver with the HDMI playback path:
- a new HDMI DMA memif (MT2701_MEMIF_HDMI) mapped to the
AFE_HDMI_OUT_{CON0,BASE,CUR,END} registers;
- a PCM_HDMI front-end DAI (S16_LE only, 44.1k/48k) which feeds
the memif via DPCM;
- an HDMI BE DAI wrapping the AFE_8CH_I2S_OUT_CON engine that
serialises L/R samples towards the on-chip HDMI transmitter.
Sample-rate programming uses the empirically determined
HDMI_BCK_DIV = 45 * 48000 / rate - 1 formula in AUDIO_TOP_CON3,
which covers 44.1 kHz and 48 kHz within the 6-bit divider range.
The AFE_HDMI_CONN0 interconnect is programmed to route memif
output pairs to the serializer inputs with L/R in the right order
for hdmi-audio-codec.
The existing I2S engine helpers (mt2701_mclk_configuration,
mt2701_i2s_path_enable, mt2701_afe_i2s_path_disable) are reused
for the HDMI BE so that MCLK at 128*fs and the ASYS I2S3 FS field
are programmed and cleanly released across open/close cycles.
Only S16_LE and 44.1k/48k are exposed to userspace. Other rates
fall outside the 6-bit BCK divider range, and wider sample
formats require DMA BIT_WIDTH programming that the current memif
setup does not handle. These limits match what the MT8173 AFE
driver exposes for its HDMI path.
The HDMI-related AFE registers (AUDIO_TOP_CON3, AFE_HDMI_OUT_CON0,
AFE_HDMI_CONN0, AFE_8CH_I2S_OUT_CON) are added to the suspend
backup list so that the existing mtk_afe_suspend/resume framework
saves and restores them across system sleep cycles.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/a580d6d676bcdba3d8bad94bb3bcb91a336bf1ba.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI audio output path on MT2701/MT7623N is rooted in HADDS2PLL
and gated by the audio_hdmi, audio_spdf and audio_apll power gates.
Acquire these four clocks from device tree using devm_clk_get_optional
so that existing platforms which do not wire up HDMI audio keep
probing unchanged. Actual clock enable/prepare is deferred to the
upcoming HDMI DAI startup path.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/5e24890acf597b04485145b5056ad8b161b4cbda.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add register offsets and bit defines for the MT2701/MT7623N AFE
HDMI audio output path: the HDMI BCK divider in AUDIO_TOP_CON3,
the HDMI output memif control and descriptor registers, the 8-bit
AFE_HDMI_CONN0 interconnect, and the AFE_8CH_I2S_OUT_CON engine
that drives the HDMI TX serial link. These are a prerequisite for
adding an HDMI playback path to the mt2701 AFE driver and have no
behavioural effect on their own.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/2c2a2e3e5d01da4a130160f5d5ffbd2a3808fe12.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Describe the sound card node that routes the MT2701/MT7623N AFE
HDMI playback path to the on-chip HDMI transmitter. This is
separate from the AFE platform binding (mediatek,mt2701-audio)
because it represents board-level audio routing between the AFE
and the HDMI codec, not an additional IP block. MT7623N boards
carry the same IP and use the mt7623n- compatible as a fallback
to mt2701-.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/b18cd550bcfab8c5a8a765d68a9ab5bae3f1c4e7.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document four additional optional clocks feeding the HDMI audio
output path on MT2701: the HADDS2 PLL (root of the HDMI audio
clock tree), the HDMI audio and S/PDIF interface power gates,
and the audio APLL root gate. Older device trees that do not
wire these up remain valid via minItems. MT7622 does not have
HDMI audio hardware, so its compatible is restricted to the
base set of 34 clocks.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/1a871e4494d514a270c7c27c080e338b2dbf6559.1776998727.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2770 initialises the temperature readout registers to 0.
This value persists until the chip is fully powered up and
the ADC starts sampling. The ADC then persists the last sampled
temperature during software shutdown.
The ADC should therefore never return 0 in normal operating
conditions, so return -ENODATA and mark it as a fault condition
using HWMON_T_FAULT.
Fixes: ff73e27801 ("ASoC: tas2770: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS2764 datasheet specifies that the chip initialises the
temperature register such that the temperature reading is 2.6 *C,
ostensibly to prevent tripping the chip's protection circuitry.
The chip is not capable of representing 2.6 *C however, and the
register is actually initialised to 0. The ADC does not start
sampling until the chip is powered up, and the last sampled
temperature persists in the register during software shutdown.
Therefore, any reading returning 0 is almost certain to be
from before the ADC has actually started sampling, meaning that
it is invalid.
Return -ENODATA early if the temperature has not yet been sampled
by the chip, and indicate a fault condition using HWMON_T_FAULT.
Fixes: 186dfc85f9 ("ASoC: tas2764: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Realtek RTL8221B Ethernet PHY supports three LED pins which are used to
indicate link status and activity. Add netdev trigger support for them.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260501100002.755672-1-amadeus@jmu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
egress_dev() formats np->dev_mac via snprintf() but receives buf as
a bare char *, so it cannot derive the buffer size from the pointer. The
size argument was hardcoded to MAC_ADDR_STR_LEN (3 * ETH_ALEN - 1 = 17),
which is silly wrong in two ways:
1) misleading kernel log output on the MAC-selected target path
(np->dev_name[0] == '\0'); for example "aa:bb:cc:dd:ee:ff doesn't
exist, aborting" was logged as "aa:bb:cc:dd:ee:f doesn't exist,
aborting".
2) the second argument of snprintf is the size of the buffer, not the
size of what you want to write.
Add a bufsz parameter to egress_dev() and pass sizeof(buf) from each
caller, matching the standard snprintf() idiom and removing the
hardcoded size from the helper.
Every caller already declares "char buf[MAC_ADDR_STR_LEN + 1]" so the
formatted MAC continues to fit.
Tested by booting with
netconsole=6665@/aa:bb:cc:dd:ee:ff,6666@10.0.0.1/00:11:22:33:44:55
on a kernel without a matching device. Pre-fix dmesg shows
"aa:bb:cc:dd:ee:f doesn't exist, aborting"; post-fix shows the full
"aa:bb:cc:dd:ee:ff doesn't exist, aborting".
Fixes: f8a10bed32 ("netconsole: allow selection of egress interface via MAC address")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260501-netpoll_snprintf_fix-v1-1-84b0566e6597@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Igor Ushakov reported that unix_gc() could run with gc_in_progress
being false if the work is scheduled while running:
Thread 1 Thread 2 Thread 3
-------- -------- --------
unix_schedule_gc() unix_schedule_gc()
`- if (!gc_in_progress) `- if (!gc_in_progress)
|- gc_in_progress = true |
`- queue_work() |
unix_gc() <----------------/ |
| |- gc_in_progress = true
... `- queue_work()
| |
`- gc_in_progress = false |
|
unix_gc() <---------------------------------------------'
|
... /* gc_in_progress == false */
|
`- gc_in_progress = false
unix_peek_fpl() relies on gc_in_progress not to confuse GC
by MSG_PEEK.
Let's set gc_in_progress to true in unix_gc().
Fixes: 8b90a9f819 ("af_unix: Run GC on only one CPU.")
Reported-by: Igor Ushakov <sysroot314@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260501073945.1884564-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We soon will no longer hold RTNL in qdisc dumps.
Add READ_ONCE()/WRITE_ONCE() annotations.
Note: taprio already uses RCU to protect most of its fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260501064247.2027688-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .driver_data member of the various struct pci_device_id arrays were
initialized by list expressions. This isn't easily readable if you're
not into PCI. Using named initializers is more explicit and thus easier
to parse. Also skip explicit assignments of 0 (which the compiler then
takes care of).
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260504142117.2116978-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The L3 CAT test loads a buffer into cache that is proportional to the L3
size allocated for the workload and measures cache misses when accessing
the buffer as a test of L3 occupancy. When loading the buffer it can be
assumed that a portion of the buffer will be loaded into the L2 cache and
depending on cache design may not be present in L3. It is thus possible
for data to not be in L3 but also not trigger an L3 cache miss when
accessed.
Reduce impact of L2 on the L3 CAT test by, if L2 allocation is supported,
minimizing the portion of L2 that the workload can allocate into. This
encourages most of buffer to be loaded into L3 and support better
comparison between buffer size, cache portion, and cache misses when
accessing the buffer.
Link: https://lore.kernel.org/r/1f5aad318889cd6d4f9a8d8b0fbe83e3848d41a9.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CAT test relies on the PERF_COUNT_HW_CACHE_MISSES event to determine if
modifying a cache portion size is successful. This event is configured to
report the data as part of an event group, but no other events are added to
the group.
Remove the unnecessary PERF_FORMAT_GROUP format setting. This eliminates
the need for struct perf_event_read and results in read() of the associated
file descriptor to return just one value associated with the
PERF_COUNT_HW_CACHE_MISSES event of interest.
Link: https://lore.kernel.org/r/fb69325eba5031b735fa79effaaacd797c9c6040.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As the CAT test reads the same buffer into different sized cache portions
it compares the number of cache misses against an expected percentage
based on the size of the cache portion.
Systems and test conditions vary. The CAT test is a test of resctrl
subsystem health and not a test of the hardware architecture so it is not
required to place requirements on the size of the difference in cache
misses, just that the number of cache misses when reading a buffer
increase as the cache portion used for the buffer decreases.
Remove additional constraint on how big the difference between cache
misses should be as the cache portion size changes. Only test that the
cache misses increase as the cache portion size decreases. This remains
a good sanity check of resctrl subsystem health while reducing impact
of hardware architectural differences and the various conditions under
which the test may run.
Increase the size difference between cache portions to additionally avoid
any consequences resulting from smaller increments.
Link: https://lore.kernel.org/r/6de4da5486354c0f25fef0d194956470cb744041.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 501cfdba0a ("selftests/resctrl: Do not compare performance
counters and resctrl at low bandwidth") introduced a threshold under which
memory bandwidth values from MBM and performance counters are not compared.
This is needed because MBM and the PMUs do not have an identical view of
memory bandwidth since PMUs can count all memory traffic while MBM does not
count "overhead" (for example RAS) traffic that cannot be attributed to an
RMID. As a ratio this difference in view of memory bandwidth is pronounced
at low memory bandwidths.
The 750MiB threshold was chosen arbitrarily after comparisons on different
platforms. Exposed to more platforms after introduction this threshold has
proven to be inadequate.
Having accurate comparison between performance counters and MBM requires
careful management of system load as well as control of features that
introduce extra memory traffic, for example, patrol scrub. This is not
appropriate for the resctrl selftests that are intended to run on a
variety of systems with various configurations.
Increase the memory bandwidth threshold under which no comparison is made
between performance counters and MBM. Add additional leniency by increasing
the percentage of difference that will be tolerated between these counts.
There is no impact to the validity of the resctrl selftests results as a
measure of resctrl subsystem health.
Link: https://lore.kernel.org/r/b374c33ddd324130d6255cbb91c3dd500e8277e7.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The resctrl selftests discover needed parameters to perf_event_open() via
sysfs. The PMU associated with every memory controller (iMC) is discovered
via the /sys/bus/event_source/devices/uncore_imc_N/type file while
the read memory bandwidth event type and umask is discovered via
/sys/bus/event_source/devices/uncore_imc_N/events/cas_count_read.
Newer systems may have multiple events that expose read memory bandwidth.
Running a recent kernel that includes
commit 6a8a48644c ("perf/x86/intel/uncore: Add per-scheduler IMC CAS count events")
on these systems expose the multiple events. For example,
/sys/bus/event_source/devices/uncore_imc_N/events/cas_count_read_sch0
/sys/bus/event_source/devices/uncore_imc_N/events/cas_count_read_sch1
Support parsing of iMC PMU properties when the PMU may have multiple events
to measure read memory bandwidth. The PMU only needs to be discovered once.
Split the parsing of event details from actual PMU discovery in order to
loop over all events associated with the PMU. Match all events with the
cas_count_read prefix instead of requiring there to be one file with that
name.
Make the parsing code more robust. With strings passed around to create
needed paths, use snprintf() instead of sprintf() to ensure there is
always enough space to create the path while using the standard PATH_MAX
for path lengths. Ensure there is enough room in imc_counters_config[]
before attempting to add an entry.
Link: https://lore.kernel.org/r/b03ca0fa21a09500c56ee589e32516c2c5effeaf.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The events needed to read memory bandwidth are discovered by iterating
over every memory controller (iMC) within /sys/bus/event_source/devices.
Each iMC's PMU is assumed to have one event to measure read memory
bandwidth that is represented by the sysfs cas_count_read file. The event's
configuration is read from "cas_count_read" and stored as an element of
imc_counters_config[] by read_from_imc_dir() that receives the
index of the array where to store the configuration as argument.
It is possible that an iMC's PMU may have more than one event that should
be used to measure memory bandwidth.
Change semantics to not provide the index of the array to
read_from_imc_dir() but instead a pointer to the index. This enables
read_from_imc_dir() to store configurations for more than one event by
incrementing the index to imc_counters_config[] itself.
Ensure that the same type is consistently used for the index as it is
passed around during counter configuration.
Link: https://lore.kernel.org/r/549e026d20af0381349e645c912e6470fce8bd7e.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The MBM and MBA tests compare MBM memory bandwidth measurements against
the memory bandwidth event values obtained from each memory controller's
PMU. The memory bandwidth event settings are discovered from the memory
controller details found in /sys/bus/event_source/devices/uncore_imc_N and
stored in struct imc_counter_config.
In addition to event settings struct imc_counter_config contains
imc_counter_config::return_value in which the associated event value is
stored on every read.
The event value is consumed and immediately recorded at regular intervals.
The stored value is never consumed afterwards, making its storage as part
of event configuration unnecessary.
Remove the return_value member from struct imc_counter_config. Instead
just use a more aptly named "measurement" local variable for use during
event reading.
Link: https://lore.kernel.org/r/e0b6ad2755e2fd802f54b0bc07eeb90247baca19.1775266384.git.reinette.chatre@intel.com
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CMT test creates a new control group that is also capable of monitoring
and assigns the workload to it. The workload allocates a buffer that by
default fills a portion of the L3 and keeps reading from the buffer,
measuring the L3 occupancy at intervals. The test passes if the workload's
L3 occupancy is within 15% of the buffer size.
The CMT test does not take into account that some of the workload's data
may land in L2/L1. Matching L3 occupancy to the size of the buffer while
a portion of the buffer can be allocated into L2 is not accurate.
Take the L2 cache into account to improve test accuracy:
- Reduce the workload's L2 cache allocation to the minimum on systems that
support L2 cache allocation. Do so with a new utility in preparation for
all L3 cache allocation tests needing the same capability.
- Increase the buffer size to accommodate data that may be allocated into
the L2 cache. Use a buffer size double the L3 portion to keep using the
L3 portion size as goal for L3 occupancy while taking into account that
some of the data may be in L2.
Running the CMT test on a sample system while introducing significant
cache misses using "stress-ng --matrix-3d 0 --matrix-3d-zyx" shows
significant improvement in L3 cache occupancy:
Before:
# Starting CMT test ...
# Mounting resctrl to "/sys/fs/resctrl"
# Cache size :335544320
# Writing benchmark parameters to resctrl FS
# Write schema "L3:0=fffe0" to resctrl FS
# Write schema "L3:0=1f" to resctrl FS
# Benchmark PID: 7089
# Checking for pass/fail
# Pass: Check cache miss rate within 15%
# Percent diff=12
# Number of bits: 5
# Average LLC val: 73269248
# Cache span (bytes): 83886080
ok 1 CMT: test
After:
# Starting CMT test ...
# Mounting resctrl to "/sys/fs/resctrl"
# Cache size :335544320
# Writing benchmark parameters to resctrl FS
# Write schema "L3:0=fffe0" to resctrl FS
# Write schema "L3:0=1f" to resctrl FS
# Write schema "L2:1=0x1" to resctrl FS
# Benchmark PID: 7171
# Checking for pass/fail
# Pass: Check cache miss rate within 15%
# Percent diff=0
# Number of bits: 5
# Average LLC val: 83755008
# Cache span (bytes): 83886080
ok 1 CMT: test
Link: https://lore.kernel.org/r/00445fa64c251b86b86023f87220ee1ad8561460.1775266384.git.reinette.chatre@intel.com
Reported-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/lkml/aO+7MeSMV29VdbQs@e133380.arm.com/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
