The lag demux resources (flow table, flow group, and rules xarray)
are stored on the shared ldev. With Socket Direct, multiple SD groups
each create their own demux FT/FG during their master's IB device
initialization. Since they all write to the same ldev fields, the
second group's init overwrites the first group's pointers, leaking
the first group's FT/FG.
During teardown, the cleanup uses the overwritten pointers, destroying
the wrong group's resources and leaving leaked flow tables in the LAG
namespace. These leaked tables can interfere with subsequently created
demux tables.
Move the demux resources from the shared ldev to per-master lag_func
instances. Each master device now owns its own independent demux
state. The rule_add and rule_del helpers look up the appropriate
master's lag_func via the existing filter/group infrastructure.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When eswitch is disabled, notify the SD layer so it can clean up
SD-specific resources such as the TX flow table root configuration
on secondary devices.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the eswitch transitions, propagate the change to SD: secondaries
get their TX flow table root reconfigured for the new mode, and when
all group devices move to switchdev, the per-group shared FDB is
activated.
Shared FDB activation is best-effort - failure does not block the
eswitch transition; the next transition retries.
Note: the existing mlx5_get_sd() guard that blocks switchdev for SD
devices is intentionally retained. It will be removed once all
supporting patches are in place.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In Socket Direct configurations the primary and secondary PFs share the
same native_port_num. The eswitch vport metadata encodes pf_num in its
upper bits to distinguish vports across PFs. Without SD-awareness, both
PFs generate identical metadata, causing FDB rules to steer traffic to
the wrong representor.
Add mlx5_sd_pf_num_get() which remaps the pf_num for SD devices.
Use it so each PF in an SD group produces unique vport metadata.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mlx5_fs_cmd_query_l2table_silent() to query the current silent mode
state from firmware. This allows detecting if firmware has already put
secondary devices into silent mode.
During SD group registration, query the silent mode of each device. If
a device is already in silent mode (set by firmware), record this in
the fw_silents_secondaries flag and use it to help determine the
primary/secondary roles.
When fw_silents_secondaries is set, skip the driver-initiated silent
mode set/unset operations since firmware manages this state. This
handles configurations where firmware persistently silences secondary
devices.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor SD group registration to use devcom event-driven role
determination to ensure SD is marked as ready only after roles are fully
assigned and the group state is consistent, making outside accessors,
which will be added in downstream patches, safe to use without races.
The devcom events:
- SD_PRIMARY_SET event: each device compares bus numbers with peers
to determine which should be primary
- SD_SECONDARIES_SET event: secondaries register themselves with the
elected primary device
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devcom events are not expected to fail. Rather than attempting
a rollback that may not be meaningful, allow callers to pass
DEVCOM_CANT_FAIL as the rollback_event to indicate that the event
handler should not fail. If it does, emit a warning and stop
propagating to further peers, but skip the rollback path.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor mlx5_devcom_send_event() into two functions:
- mlx5_devcom_locked_send_event(): performs the dispatch (and
rollback) with comp->sem already held by the caller.
- mlx5_devcom_send_event(): unchanged wrapper that takes comp->sem,
calls the locked variant, and releases it.
This lets callers bracket multiple event broadcasts under a single
held write lock, eliminating the gap between consecutive dispatches
where peer state could change.
Will be used by a downstream patch.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SD secondary devices share the primary's uplink and do not have
their own uplink representor. When reloading IB reps on secondary
devices, skip the uplink and only load VF/SF vport IB reps.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmov9IgACgkQJNaLcl1U
h9BOYQf/fLQJlwAIQJu540syYQL9N7Lz/+6f41WEAeF86npaz1wvggwX7rWsOlCB
f+6bGiQ/QvYGrDlKBoIRvbrcUosYo5RcPveBhLUeYQ6w2wyhYR5bjF77YMFHHIWm
h+8wG4Cf59SnAvQ2sdctcKgaCbnJgN8IfTIhdGDQwDi2vf9AUO7o4pfKXO/wligq
4vBeuFLM+WgU5x0VhvwIU6yfa8MGSMvf/oX0bn3xYjOp2LyHzdfRGvoY/wa+6pFd
9QX2QsU6Yjrt5/zvuENwOq+nb3NbdDDqdQK8PRDnzYsbhpFj1RA5XRVShhk89h3F
TZyRqht++Vfs0b3CNW1Q59XZgxNX8A==
=3lzj
-----END PGP SIGNATURE-----
Merge tag 'asoc-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.2
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
When a dynamic probe is created without explicitly requested arguments
via perf probe --add, the Ftrace subsystem automatically appends
"__probe_ip" to the tracepoint format to record the instruction pointer.
Currently, perf trace prints this implicit field by default.
Furthermore, because the formatting logic defaults to a standard signed
integer representation, the kernel space memory address is erroneously
displayed as a meaningless negative integer.
❯ sudo ./perf trace --event probe:proc_sys_open --max-events 1
0.000 ps/1316543 probe:proc_sys_open(__probe_ip: -1406056956)
This patch addresses the user experience by combining two refinements:
1. "__probe_ip" is now hidden from the standard output, as its
presence adds no contextual value for a bare probe.
2. If the user explicitly requests verbose output (--verbose),
"__probe_ip" is intercepted and properly formatted as a hexadecimal
kernel address, restoring its utility for debugging inline
function hits.
❯ sudo ./perf trace --event probe:proc_sys_open --max-events 1
0.000 ps/1314074 probe:proc_sys_open()
❯ sudo ./perf trace --verbose --event probe:proc_sys_open --max-events 1
Using CPUID GenuineIntel-6-8E-C
mmap size 528384B
0.000 ps/1314366 probe:proc_sys_open(__probe_ip: 0xffffffffac314604)
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Vacek <neelx@suse.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Ashe <sean@ashe.io>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new shell test to verify the feature. The test covers:
- Basic address remapping for user space samples.
- Pipe mode coverage for piped into.
- Callchain address remapping.
- Consistency of output before and after injection.
- Pipe mode report consistency.
- Dropping of samples that leak ASLR info (physical addresses).
- Kernel address remapping (utilizing a dedicated kernel-intensive VFS
dd workload to guarantee continuous timer interrupts sampling flow
inside kernel privilege states).
- Kernel report consistency with address normalization.
The test suite is hardened with global 'set -o pipefail' assertions
to catch pipeline failures, stream-consuming awk processors to handle
SIGPIPE signals, and a dedicated pipe output scenario validating raw
'perf inject -o -' stdout streams.
Note on kernel DSO normalization in the test script:
The test script deliberately normalizes all kernel DSOs to a generic
[kernel] tag before diffing, as obfuscating physical kernel addresses
forces perf report to occasionally shift samples between individual
modules and [kernel.kallsyms] due to the lack of valid host module
boundary maps.
Note on ARM:
Kernel-based ASLR test cases (test_kernel_aslr and test_kernel_report_aslr)
are skipped on ARM architectures (aarch64 and arm*) to bypass high latency
constraints (such as check_invariants() spending excessive execution time
in maps__split_kallsyms() on debug builds) and symbolization inconsistencies.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gabriel Marin <gmx@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the ASLR tool stripping helpers to drop register dump payloads
by masking out the relevant perf_event_attr fields (sample_regs_user,
sample_regs_intr) when the delegated tool is handling the data.
struct aslr_evsel_priv maintains the original perf_event_attr values
and is looked up via the evsel_orig_attrs hashmap so that sample sizes
can be properly parsed even when bits are stripped from the pipeline.
This is critical for bounded array copying within aslr_tool__process_sample,
which relies on orig_sample_type to determine exactly which fields were
captured by the kernel before any stripping occurred.
This allows us to keep samples that would otherwise be dropped because
they contain registers, while still obfuscating the registers.
Committer notes:
Moved now used variables from the previous patch:
struct aslr_evsel_priv *priv = NULL;
u64 orig_sample_type;
u64 orig_regs_user;
u64 orig_regs_intr;
Assisted-by: Antigravity:gemini-3.1-pro
Co-developed-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the sample address remapping logic to the ASLR tool. This patch
implements aslr_tool__process_sample, which parses sample events,
remaps IPs, ADDRs, callchains, and branch stacks using the mappings
collected from metadata events, and drops potentially leaking raw,
register, stack, physical address, and aux samples.
Also adds the aslr_tool__remap_address helper function.
Note on cross-endian compatibility:
'perf inject' functions as an endianness converter. Input files are read,
and their events are byte-swapped to host endianness in memory. When the
tool emits its output, it writes a host-endian PERF_MAGIC in the file
header, thereby marking the output file as host-endian natively.
Because the output file is always written in host endianness, events and
payloads must be constructed entirely using host-endian layouts. For this
reason, this patch explicitly un-packs and repacks PERF_SAMPLE_TID (and
PERF_SAMPLE_CPU) using unions to ensure that the sequential 32-bit layout
is correctly aligned in host endianness. Similarly, branch stack flags
(which are modified in-place to host-endian bitfields by the parser) are
copied directly to the newly synthesized event. When re-parsing the newly
synthesized event, 'needs_swap=false' is explicitly used to prevent double
swapping the already host-endian fields.
Committer notes:
Removed several unused variables, they will be reintroduced in the
following patches where they are finally used:
struct aslr_evsel_priv *priv = NULL;
u64 orig_sample_type;
u64 orig_regs_user;
u64 orig_regs_intr;
Also used PRIx64 for two u64 args (addresses) and %zu for a size_t arg
(map__size()) to fix the build on 32-bit architectures.
Assisted-by: Antigravity:gemini-3.1-pro
Co-developed-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the s390 specific idle_time_us and idle_count per cpu sysfs
files. They do not provide any additional value. The risk that there
are existing applications which rely on these architecture specific
files should be very low.
However if it turns out such applications exist, this can be easily
reverted.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The former s390 specific arch_cpu_idle_time() implementation was
removed, since its implementation was racy and reported idle time
could go backwards [1].
However this removal was not necessary, since independently of the s390
architecture specific races there exists the iowait counter update race,
which can also lead to reported idle time going backwards [2].
With Frederic Weisbecker's recent cpu idle time accounting refactoring
kernel_cpustat got a sequence counter. Use this to implement s390 specific
variants of kcpustat_field_idle() and kcpustat_field_iowait(). This is
logically a revert of [1] and moves cpu idle time accounting back into s390
architecture code, which is also more precise than the dyntick idle time
accounting by nohz/scheduler.
For comparing cross cpu time stamps it is necessary to use the stcke
instead of the stckf instruction in irq entry path. Furthermore this
open-codes a sequence lock in assembler and C code, which is required to
update the irq entry time stamp to the per cpu idle_data structure in a
race free manner.
[1] commit be76ea6144 ("s390/idle: remove arch_cpu_idle_time() and corresponding code")
[2] commit ead70b7523 ("timers/nohz: Add a comment about broken iowait counter update race")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The upcoming cpu idle time accounting rework involves comparing and
subtracting cross cpu time stamps. Time stamps created with the stckf
instruction monotonic with respect to the local cpu. For cross cpu
monotonic time stamps the slightly slower stcke instruction has to
be used [1].
Convert the idle time accounting relevant usages of stckf to stcke.
[1] Principles of Operation - Setting and Inspecting the Clock
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Move union tod_clock type to separate header file. This is preparation
for upcoming changes in order to avoid header dependency problems.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=36f9, idProduct=c009
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: XIBERIA K03S
usb 1-1: Manufacturer: Actions
usb 1-1: usb_probe_device
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB621706287FE30F4D8EE4618BD2E62@TYUPR06MB6217.apcprd06.prod.outlook.com
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
-----BEGIN PGP SIGNATURE-----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=++bw
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-7.2-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 7.2
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
1. Enable FPU with max VM supported FPU type.
2. Some enhancements about interrupt injection.
3. Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=WDcm
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v7.2
1. Enable FPU with max VM supported FPU type.
2. Some enhancements about interrupt injection.
3. Some bug fixes and other small changes.
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
-----BEGIN PGP SIGNATURE-----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=GOQC
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-7.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event().
Reported-by: zdi-disclosures@trendmicro.com
Signed-off-by: Jiri Kosina <jkosina@suse.com>
fuse_uring_commit_fetch() error path called fuse_request_end(req) without
clearing ent->fuse_req when fuse_ring_ent_set_commit() fails. The
still-pending fuse_uring_send_in_task() task-work later dereferences the
dangling pointer through fuse_uring_prepare_send(), causing a
use-after-free.
End the request with fuse_uring_req_end(), which handles all conditions
already.
Annotation/edition by Bernd: The UAF should be fixed by other means already
and actually has to be avoided that way.
Just checking for ent->fuse_req == NULL in fuse_uring_send_in_task()
would be prone to race conditions, because if malicious userspace
would commit requests that have passed the NULL check, but are
in doing args copy, it would still trigger a use-after-free.
Setting ent->fuse_req = NULL in fuse_uring_commit_fetch() still
makes sense, though.
Reported-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reported-by: Berkant Koc <me@berkoc.com>
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Replace two BUG() calls in keyctl_pkey_params_get_2() and
keyctl_pkey_e_d_s() default cases with -EOPNOTSUPP, matching
the error style already used in these functions.
Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Replace BUG() in construct_get_dest_keyring() default case
with return -EINVAL to handle the unimplemented group keyring
destination gracefully.
Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260613130408.13709-2-med08elkadiri@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.]
Cc: stable@vger.kernel.org # v5.10+
Fixes: b5f545c880 ("[PATCH] keys: Permit running process to instantiate keys")
Reported-by: Shaomin Chen <eeesssooo020@gmail.com>
Closes: https://lore.kernel.org/r/20260519144403.436694-1-eeesssooo020@gmail.com
Signed-off-by: Shaomin Chen <eeesssooo020@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add SLAB_NO_MERGE to key_jar to prevent the allocator from merging it
with other similarly-sized caches. This hardens struct key isolation by
ensuring dedicated slab pages.
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260610065052.9120-1-med08elkadiri@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
derived_buf is guaranteed to be HASH_SIZE - and it is more than enough.
The strscpy() degenerates into an memcpy() (as did the strcpy()).
Do the same for the associated "ENC_KEY" copy.
Removes a possibly unbounded strcpy().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260606202633.5018-9-david.laight.linux@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The negative-key race fix added release/acquire ordering for key use.
Publish payload before state; read state before payload.
keyring_search_iterator() still uses READ_ONCE() before match callbacks.
An asymmetric match callback calls asymmetric_key_ids(), which reads
key->payload.data[asym_key_ids].
Use key_read_state() there to complete that ordering.
Fixes: 363b02dab0 ("KEYS: Fix race between updating and finding a negative key")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260529033406.20673-1-hanguidong02@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The 'migratable' variable is initialized only during the init phase
in the 'init_trusted' function and never changed. So, mark it as
__ro_after_init.
Signed-off-by: Len Bao <len.bao@gmx.us>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260516152249.41851-1-len.bao@gmx.us
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Use kmalloc_flex() when allocating a new struct user_key_payload in
user_preparse() to replace the open-coded size arithmetic and to keep
the size type-safe.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20260504093058.49720-3-thorsten.blum@linux.dev
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
TPM_DEBUG, and other similar flags, are a non-standard way to specify a
feature in Linux kernel. Introduce CONFIG_TRUSTED_KEYS_DEBUG for trusted
keys, and use it to replace these ad-hoc feature flags.
Given that trusted keys debug dumps can contain sensitive data, harden the
feature as follows:
1. In the Kconfig description postulate that pr_debug() statements must be
used.
2. Use pr_debug() statements in TPM 1.x driver to print the protocol dump.
3. Require trusted.debug=1 on the kernel command line (default: 0) to
activate dumps at runtime, even when CONFIG_TRUSTED_KEYS_DEBUG=y.
Traces, when actually needed, can be easily enabled by providing
trusted.dyndbg='+p' and trusted.debug=1 in the kernel command-line.
Reported-by: Nayna Jain <nayna@linux.ibm.com>
Closes: https://lore.kernel.org/all/7f8b8478-5cd8-4d97-bfd0-341fd5cf10f9@linux.ibm.com/
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Srish Srinivasan <ssrish@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
encrypted-keys uses the regular Linux RNG (get_random_bytes()), not the
duplicative crypto_rng one. So it does not need to select CRYPTO_RNG.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The length for the internal output buffer is calculated incorrectly, which
can result overflow when a too small buffer is provided.
Fix the bug by allocating internal output with the size of the maximum
length of the cryptographic primitive instead of caller provided size.
Link: https://lore.kernel.org/keyrings/20260531024914.3712130-1-jarkko@kernel.org/
Cc: stable@vger.kernel.org # v4.20+
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Reported-by: Alessandro Groppo <ale.grpp@gmail.com>
Tested-by: Alessandro Groppo <ale.grpp@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
s390 needs a fast path for irq injection, and along those lines we
introduce kvm_arch_set_irq_inatomic. Instead of placing all interrupts on
the global work queue as it does today, this patch provides a fast path for
irq injection.
The inatomic fast path cannot lose control since it is running with
interrupts disabled. This meant making the following changes that exist on
the slow path today. First, the adapter_indicators page needs to be mapped
since it is accessed with interrupts disabled, so we added map/unmap
functions. Second, access to shared resources between the fast and slow
paths needed to be changed from mutex and semaphores to spin_lock's.
Finally, the memory allocation on the slow path utilizes GFP_KERNEL_ACCOUNT
but we had to implement the fast path with GFP_ATOMIC allocation. Each of
these enhancements were required to prevent blocking on the fast inject
path.
Fencing of Fast Inject in Secure Execution environments is enabled in the
patch series by not mapping adapter indicator pages. In Secure Execution
environments the path of execution available before this patch is followed.
Statistical counters have been added to enable analysis of irq injection on
the fast path and slow path including io_390_inatomic, io_flic_inject_airq,
io_set_adapter_int and io_390_inatomic_no_inject. The no inject counter
captures adapter masked, coalesced and suppressed interrupts.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Douglas Freimuth <freimuth@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260604192755.203143-4-freimuth@linux.ibm.com>
The s390 adapter_indicators_set function can now be optimized to use
long-term mapped pages when available so that work can be
processed on a fast path when interrupts are disabled.
If adapter indicator pages are not mapped then local mapping is
done on a slow path as it is prior to this patch. For example, Secure
Execution environments will take the local mapping path as it does prior to
this patch.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Douglas Freimuth <freimuth@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260604192755.203143-3-freimuth@linux.ibm.com>
s390 needs map/unmap ioctls, which map the adapter set
indicator pages, so the pages can be accessed when interrupts are
disabled. The mappings are cleaned up when the guest is removed.
pin_user_pages_remote is used for both the ioctl as well
as the pin-on-demand logic in adapter_indicators_set().
Map/Unmap ioctls are fenced in order to avoid the longterm pinning
in Secure Execution environments. In Secure Execution
environments the path of execution available before this patch is followed.
Statistical counters to count map/unmap functions for adapter indicator
pages are added. The counters can be used to analyze
map/unmap functions in non-Secure Execution environments and similarly
can be used to analyze Secure Execution environments where the counters
will not be incremented as the adapter indicator pages are not mapped.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Douglas Freimuth <freimuth@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260604192755.203143-2-freimuth@linux.ibm.com>
Replace magic indices 0 and 1 for the iovec array with named constants
FUSE_URING_IOV_HEADERS and FUSE_URING_IOV_PAYLOAD. This makes the usages
self-documenting and prepares for buffer ring support which will also
reference these iovec slots by index.
Reviewed-by: Bernd Schubert <bernd@bsbernd.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a new helper function setup_fuse_copy_state() to contain the logic
for setting up the copy state for payload copying.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use enum types to identify which part of the header needs to be copied.
This improves the interface and will simplify both kernel-space and
user-space header addresses copying when buffer rings are added.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move header copying from ring logic into a new copy_header_from_ring()
function. This makes the copy_from_user() logic more clear and
centralizes error handling / rate-limited logging.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move header copying to ring logic into a new copy_header_to_ring()
function. This makes the copy_to_user() logic more clear and centralizes
error handling / rate-limited logging.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Simplify the logic for fetching + sending off the next request.
This gets rid of fuse_uring_send_next_to_ring() which contained
duplicated logic from fuse_uring_send(). This decouples request fetching
from the send operation, which makes the control flow clearer and
reduces unnecessary parameter passing.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE_NOTIFY_INC_EPOCH invalidates dentries, but does not invalidate cached
readdir results. A process with cwd inside a FUSE mount can therefore
observe stale readdir(".") output after an epoch bump.
Fix this by recording epoch in the readdir cache and checking it on reuse.
Minimal reproducer:
- mount a tiny FUSE fs with an empty root directory
- on opendir, enable fi->cache_readdir and fi->keep_cache
- chdir into the mount and call readdir(".") to populate readdir cache
- make the FUSE server report one file in the root directory
- send only FUSE_NOTIFY_INC_EPOCH
- call readdir(".") again; before this change it stays stale, after this
change it sees the new file
Fixes: 2396356a94 ("fuse: add more control over cache invalidation behaviour")
Signed-off-by: Jun Wu <quark@meta.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio_fs_setup_vqs() allocates fs->vqs and fs->mq_map before calling
virtio_find_vqs(). If virtio_find_vqs() fails, the error path frees both
pointers and returns an error to virtio_fs_probe().
virtio_fs_probe() then drops the last kobject reference, and
virtio_fs_ktype_release() frees fs->vqs and fs->mq_map again. This leaves
dangling pointers in struct virtio_fs and can trigger a double-free during
probe failure cleanup.
Set fs->vqs and fs->mq_map to NULL immediately after kfree() in the
virtio_fs_setup_vqs() error path so that the later kobject release sees an
uninitialized state and kfree(NULL) becomes harmless.
This can be reproduced when a broken virtio-fs device advertises more
request queues than the transport actually provides. In that case
virtio_find_vqs() fails while setting up the extra queue, and the probe
path reaches the double-free cleanup sequence.
Signed-off-by: Yung-Tse Cheng <mes900903@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixe does page cache invalidation after DIO and async DIO writes for
both O_DIRECT and FOPEN_DIRECT_IO cases.
Commit b359af8275 ("fuse: Invalidate the page cache after FOPEN_DIRECT_IO
write") fixed xfstests generic/209 for DIO writes in the FOPEN_DIRECT_IO
path. DIO writes without FOPEN_DIRECT_IO are already handled by
generic_file_direct_write().
However, async DIO writes (xfstests generic/451) remain unhandled.
After this fix:
- Async write with FUSE_ASYNC_DIO:
invalidate in fuse_aio_invalidate_worker()
- Otherwise (Sync or async write without FUSE_ASYNC_DIO):
- With FOPEN_DIRECT_IO:
invalidate in fuse_direct_write_iter()
- Without FOPEN_DIRECT_IO:
invalidate in generic_file_direct_write()
Workqueue is required for async write invalidation to prevent deadlock:
calling it directly in the I/O end routine (which is in fuse worker thread
context) can block on a folio lock held by a buffered I/O thread waiting
for the same fuse worker thread.
Co-developed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Cheng Ding <cding@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If FUSE_SETLK fails (e.g., due to EWOULDBLOCK), we shall not set
FUSE_RELEASE_FLOCK_UNLOCK in fuse_file_release().
Reported-by: Li Yichao <liyichao.1@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
