Allow BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_TRACEPOINT, and
BPF_TRACE_RAW_TP (tp_btf) programs to be sleepable by adding them
to can_be_sleepable().
For BTF-based raw tracepoints (tp_btf), add a load-time check in
bpf_check_attach_target() that rejects sleepable programs attaching
to non-faultable tracepoints with a descriptive error message.
For raw tracepoints (raw_tp), add an attach-time check in
bpf_raw_tp_link_attach() that rejects sleepable programs on
non-faultable tracepoints. The attach-time check is needed because
the tracepoint name is not known at load time for raw_tp.
The attach-time check for classic tracepoints (tp) in
__perf_event_set_bpf_prog() was added in the previous patch.
Replace the verbose error message that enumerates allowed program
types with a generic "Program of this type cannot be sleepable"
message, since the list of sleepable-capable types keeps growing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-4-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add trace_call_bpf_faultable(), a variant of trace_call_bpf() for
faultable tracepoints that supports sleepable BPF programs. It uses
rcu_tasks_trace for lifetime protection and
bpf_prog_run_array_sleepable() for per-program RCU flavor selection,
following the uprobe_prog_run() pattern.
Restructure perf_syscall_enter() and perf_syscall_exit() to run BPF
programs before perf event processing. Previously, BPF ran after the
per-cpu perf trace buffer was allocated under preempt_disable,
requiring cleanup via perf_swevent_put_recursion_context() on filter.
Now BPF runs in faultable context before preempt_disable, reading
syscall arguments from local variables instead of the per-cpu trace
record, removing the dependency on buffer allocation. This allows
sleepable BPF programs to execute and avoids unnecessary buffer
allocation when BPF filters the event. The perf event submission
path (buffer allocation, fill, submit) remains under preempt_disable
as before. Since BPF no longer runs within the buffer allocation
context, the fake_regs output parameter to perf_trace_buf_alloc()
is no longer needed and is replaced with NULL.
Add an attach-time check in __perf_event_set_bpf_prog() to reject
sleepable BPF_PROG_TYPE_TRACEPOINT programs on non-syscall
tracepoints, since only syscall tracepoints run in faultable context.
This prepares the classic tracepoint runtime and attach paths for
sleepable programs. The verifier changes to allow loading sleepable
BPF_PROG_TYPE_TRACEPOINT programs are in a subsequent patch.
To: Peter Zijlstra <peterz@infradead.org>
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # for BPF bits
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-3-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add bpf_prog_run_array_sleepable() for running BPF program arrays
on faultable tracepoints. Unlike bpf_prog_run_array_uprobe(), it
includes per-program recursion checking for private stack safety
and hardcodes is_uprobe to false.
Skip dummy_bpf_prog at the top of the loop. When
bpf_prog_array_delete_safe() replaces a detached program with
dummy_bpf_prog on allocation failure, the dummy is statically
allocated and has NULL active, stats, and aux fields. Identify
it by prog->len == 0, since every real program has at least one
instruction.
Keep bpf_prog_run_array_uprobe() unchanged for uprobe callers.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-2-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Rework __bpf_trace_run() to support sleepable BPF programs by using
explicit RCU flavor selection, following the uprobe_prog_run() pattern.
For sleepable programs, use rcu_read_lock_tasks_trace() for lifetime
protection with migrate_disable(). For non-sleepable programs, use the
regular rcu_read_lock_dont_migrate().
Remove the preempt_disable_notrace/preempt_enable_notrace pair from
the faultable tracepoint BPF probe wrapper in bpf_probe.h, since
migration protection and RCU locking are now handled per-program
inside __bpf_trace_run().
Adapt bpf_prog_test_run_raw_tp() for sleepable programs: reject
BPF_F_TEST_RUN_ON_CPU since sleepable programs cannot run in hardirq
or preempt-disabled context, and call __bpf_prog_test_run_raw_tp()
directly instead of via smp_call_function_single(). Rework
__bpf_prog_test_run_raw_tp() to select RCU flavor per-program and
add per-program recursion context guard for private stack safety.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-1-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
TAS5832 is in same family with TAS5827/28/30.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260414015441.2439-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NVMe Base Specification 8.3.5.5.9 states that the session key Ks
shall be computed from the ephemeral DH key by applying the hash
function selected by the HashID parameter.
The current implementation stores the raw DH shared secret as the
session key without hashing it. This causes redundant hash operations:
1. Augmented challenge computation (section 8.3.5.5.4) requires
Ca = HMAC(H(g^xy mod p), C). The code compensates by hashing the
unhashed session key in nvme_auth_augmented_challenge() to produce
the correct result.
2. PSK generation (section 8.3.5.5.9) requires PSK = HMAC(Ks, C1 || C2)
where Ks should already be H(g^xy mod p). As the DH shared secret
is always larger than the HMAC block size, HMAC internally hashes
it before use, accidentally producing the correct result.
When using secure channel concatenation with bidirectional
authentication, this results in hashing the DH value three times: twice
for augmented challenge calculations and once during PSK generation.
Fix this by:
- Modifying nvme_auth_gen_shared_secret() to hash the DH shared secret
once after computation: Ks = H(g^xy mod p)
- Removing the hash operation from nvme_auth_augmented_challenge()
as the session key is now already hashed
- Updating session key buffer size from DH key size to hash output size
- Adding specification references in comments
This avoid storing the raw DH shared secret and reduces the number of
hash operations from three to one when using secure channel
concatenation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add a bpf_tcp_ca selftest for the TCP_NODELAY restriction in
bpf-tcp-cc.
Update bpf_cubic to exercise init() and cwnd_event_tx_start(),
and check that both callbacks reject bpf_setsockopt(TCP_NODELAY)
with -EOPNOTSUPP.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260421155804.135786-5-kafai.wan@linux.dev
Add a sockops selftest for the TCP_NODELAY restriction in
BPF_SOCK_OPS_HDR_OPT_LEN_CB and BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
With BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG enabled,
bpf_setsockopt(TCP_NODELAY) returns -EOPNOTSUPP from
BPF_SOCK_OPS_HDR_OPT_LEN_CB and BPF_SOCK_OPS_WRITE_HDR_OPT_CB, avoiding
unbounded recursion and kernel stack overflow.
Other cases continue to work as before, including
BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-4-kafai.wan@linux.dev
A BPF TCP congestion control program can call bpf_setsockopt() from
its callbacks. In current kernels, if it calls
bpf_setsockopt(TCP_NODELAY) from cwnd_event_tx_start(), the call can
re-enter the TCP transmit path before the outer tcp_transmit_skb()
has completed and advanced the send head.
This can re-trigger CA_EVENT_TX_START and lead to unbounded recursion:
tcp_transmit_skb()
-> tcp_event_data_sent()
-> tcp_ca_event(sk, CA_EVENT_TX_START)
-> cwnd_event_tx_start()
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_write_xmit()
-> tcp_transmit_skb()
This leads to unbounded recursion and can overflow the kernel stack.
Reject TCP_NODELAY with -EOPNOTSUPP for bpf-tcp-cc by introducing
a dedicated setsockopt proto for BPF_PROG_TYPE_STRUCT_OPS TCP
congestion control programs. To keep it simple, all tcp-cc ops is
rejected for TCP_NODELAY.
Fixes: 7e41df5dbb ("bpf: Add a few optnames to bpf_setsockopt")
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-3-kafai.wan@linux.dev
A BPF_SOCK_OPS program can enable
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG and then call
bpf_setsockopt(TCP_NODELAY) from BPF_SOCK_OPS_HDR_OPT_LEN_CB or
BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
In these callbacks, bpf_setsockopt(TCP_NODELAY) can reach
__tcp_sock_set_nodelay(), which can call tcp_push_pending_frames().
>From BPF_SOCK_OPS_HDR_OPT_LEN_CB, tcp_push_pending_frames() can call
tcp_current_mss(), which calls tcp_established_options() and re-enters
bpf_skops_hdr_opt_len().
BPF_SOCK_OPS_HDR_OPT_LEN_CB
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_current_mss()
-> tcp_established_options()
-> bpf_skops_hdr_opt_len()
-> BPF_SOCK_OPS_HDR_OPT_LEN_CB
>From BPF_SOCK_OPS_WRITE_HDR_OPT_CB, tcp_push_pending_frames() can call
tcp_write_xmit(), which calls tcp_transmit_skb(). That path recomputes
header option length through tcp_established_options() and
bpf_skops_hdr_opt_len() before re-entering bpf_skops_write_hdr_opt().
BPF_SOCK_OPS_WRITE_HDR_OPT_CB
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_write_xmit()
-> tcp_transmit_skb()
-> tcp_established_options()
-> bpf_skops_hdr_opt_len()
-> bpf_skops_write_hdr_opt()
-> BPF_SOCK_OPS_WRITE_HDR_OPT_CB
This leads to unbounded recursion and can overflow the kernel stack.
Reject TCP_NODELAY with -EOPNOTSUPP in bpf_sock_ops_setsockopt()
when bpf_setsockopt() is called from
BPF_SOCK_OPS_HDR_OPT_LEN_CB or BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
Fixes: 7e41df5dbb ("bpf: Add a few optnames to bpf_setsockopt")
Closes: https://lore.kernel.org/bpf/d1d523c9-6901-4454-a183-94462b8f3e4e@std.uestc.edu.cn/
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-2-kafai.wan@linux.dev
Describe Waveshare 7" DSI panel which uses ILI9881 as a panel
controller. This panel requires two voltags supplies, so add separate
iovcc supply.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260418-waveshare-dsi-touch-v4-1-b249f3e702bd@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
LVDS transmitter used in the Microsoft Surface RT.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260417064953.20511-2-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with
CONFIG_RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring
KUNIT && m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmno78kACgkQjYWKoQLX
FBiHbggAmW5hPIDf4F8HLomMREaaQb7QAyYwfeefwhcFUXSMu8td8S68aN4UkOnS
DGSFjb+V6Nqd+ewrF7IS9pRU9YFsmBqo3MnLdcJ/ojZFz8BlwoAi+E4AD1a38hY2
9zh2siPBMjydqBRUn6zjsK8auk4e8r44iS5MNNMXDF2ePE/PnPKTm93GhbtnnM6r
a7mQkiPbi6j0sN/UU+pQkhS4fm2XNaGpCGGX0W0v2RdLIYZ9zQQdg4TaEsjQ5wZA
OC3P8LG3OyJjnxsY2J8PIKK0VM0JP67KUGnQOi1y8HbN1LkFfAWF6CK7tsyUE/JM
TYg7ENs2mUMmaa8niOGkiXzjjAxD0g==
=NpmP
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring KUNIT &&
m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
* tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix warning about wrong kernel doc comment
PCI: s390: Expose the UID as an arch specific PCI slot attribute
docs: s390/pci: Improve and update PCI documentation
s390/pkey: Add comment about synchronize_rcu() to pkey base
s390/hmcdrv: Remove commented out code
s390/zcrypt: Slight rework on the agent_id field
s390/zcrypt: Explicitly use a card variable in _zcrypt_send_cprb
s390/zcrypt: Rework MKVP fields and handling
s390/zcrypt: Make apfs a real unsigned int field
s390/zcrypt: Rework domain processing within zcrypt device driver
s390/zcrypt: Move inline function rng_type6cprb_msgx from header to code
s390/percpu: Provide arch_raw_cpu_ptr()
s390: Enable page table check for debug_defconfig
s390/pgtable: Add s390 support for page table check
s390/pgtable: Use set_pmd_bit() to invalidate PMD entry
mm/page_table_check: Pass mm_struct to pxx_user_accessible_page()
s390/boot: Respect kaslr_enabled() for identity randomization
s390/Kconfig: Make modules sanity test a module-only option
s390/setup: Drop stale ident_map_size declaration
Replace sprintf() with sysfs_emit() in param_get_audit() and
param_get_mode(). sysfs_emit() is preferred for formatting sysfs output
because it provides safer bounds checking. Add terminating newlines as
suggested by checkpatch.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Remove the redundant if check in sk_peer_get_label() and return
ERR_PTR(-ENOPROTOOPT) directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Use kmemdup_nul() to copy 'value' instead of using memcpy() followed by
a manual NUL termination. No functional changes.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
We can batch admin commands submitted through io_uring_cmd passthrough,
which means bd->last may be false and skips the doorbell write to
aggregate multiple commands per write. If a subsequent command can't be
dispatched for whatever reason, we have to provide the blk-mq ops'
commit_rqs callback in order to ensure we properly update the doorbell.
Fixes: 58e5bdeb9c ("nvme: enable uring-passthrough for admin commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Section 8.3.4.5.5 of the NVMe Base Specification 2.1 describes what is
included in the Response Value (RVAL) hash and SC_C should be included.
Currently we are hardcoding 0 instead of using the correct SC_C value.
Update the host and target code to use the SC_C when calculating the
RVAL instead of using 0.
Fixes: e88a7595b5 ("nvme-tcp: request secure channel concatenation")
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Curently after the host sends a REPLACETLSPSK we free the TLS keys as
part of calling nvmet_auth_sq_free() on success. This means when the
host sends a follow up REPLACETLSPSK we return CONCAT_MISMATCH as the
check for !nvmet_queue_tls_keyid(req->sq) fails.
A previous attempt to fix this involed not calling nvmet_auth_sq_free()
on successful connections, but that results in memory leaks. Instead we
should not clear `tls_key` in nvmet_auth_sq_free(), as that was
incorrectly wiping the tls keys which are used for the session.
This patch ensures we correctly free the ephemeral session key on
connection, yet we don't free the TLS key unless closing the connection.
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In an attempt to fix REPLACETLSPSK we stopped freeing the secrets on
successful connections. This resulted in memory leaks in the kernel, so
let's revert the commit. A improved fix is being developed to just avoid
clearing the tls_key variable.
This reverts commit 2e6eb6b277.
Closes: https://lore.kernel.org/linux-nvme/CAHj4cs-u3MWQR4idywptMfjEYi4YwObWFx4KVib35dZ5HMBDdw@mail.gmail.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The command was never dispatched for the driver's "host path error", so
the command was never actually initialized and there's no corresponding
submit trace for the completion.
Reported-by: Minsik Jeon <hmi.jeon@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
+KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
=4Ke3
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
snd_microii_spdif_switch_put() returns 0 when the requested
vendor register value differs from the cached one.
This comparison was inverted by the resume-support conversion,
so real SPDIF switch toggles are ignored while no-op writes still
issue SET_CUR and report success.
Return early only when the requested value matches the cached one.
Fixes: 288673beae ("ALSA: usb-audio: Add resume support for MicroII SPDIF ctls")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260421-microii-spdif-switch-fix-v1-1-5c50dc28b88f@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_emuusb_set_samplerate() unconditionally notifies the E-MU
SampleRate Extension Unit control after issuing SET_CUR.
If snd_usb_mixer_set_ctl_value() fails, the control value has not
changed, yet snd_usb_mixer_notify_id() still invalidates the cache and
emits a value-change event to userspace.
Notify the control only after a successful write.
Fixes: 7d2b451e65 ("ALSA: usb-audio - Added functionality for E-mu 0404USB/0202USB/TrackerPre")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260421-alsa-emuusb-samplerate-notify-v1-1-8b63bbc1d7f1@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add more trace coverage to amdxdna job handling and mailbox receive
processing to make driver execution easier to debug.
Extend the xdna_job trace event to record the command opcode in
addition to the job sequence number. Use the enhanced tracepoint in
the job run, sent-to-device, signaled-fence, and job-free paths so
that trace output can be correlated with the command being executed.
Also add debug-point tracing when a command is received through the
submit ioctl path, and add a trace event when the mailbox RX worker
runs.
These changes improve visibility into job lifetime transitions and
mailbox activity, which helps debug command flow and scheduler issues.
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260421181502.1970263-1-lizhi.hou@amd.com
Since v2026.02.14
Display HT siblings in cpu# order.
Add Module-ID column.
Print Core-ID and APIC-ID in hex.
Fix misc bugs.
Signed-off-by: Len Brown <len.brown@intel.com>
On large systems with HT sibling cpu#'s more than 32 apart,
HT siblings were processed and displayed in reverse order.
This was due to how set_thread_siblings() parsed the
sibling-bit-mask.
Update set_thread_siblings to instead parse the sibling-list,
like other cpu lists, and to thus order HT siblings
by ascending CPU number, no matter the size of the system.
Signed-off-by: Len Brown <len.brown@intel.com>
Get the "module_id" from the Linux topology "cluster_id".
If the there is more than one id, show it by default.
Module joins Die etc. in the "topology" group.
Display in hex, as it is usually based mask of the APIC-id
Signed-off-by: Len Brown <len.brown@intel.com>
The core_id is based on a mask of the apic_id.
Print them both in hex, rather than decimal,
to make this relationship visibly clear.
Signed-off-by: Len Brown <len.brown@intel.com>
Make printer helper functions more readable by factoring
out a local 'sep' variable.
Remove the redundant parentheses around sprintf() calls.
Remove an unnecessary cast to "unsigned int" by using the '%08llx' instead
of '%08x'.
No functional changes.
[lenb: fix typos, simplify]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When the "--cpu-set" option limits turbostat to run on
a higher numbered HT sibling, it exits upon dividing by zero.
This is because the HT support handles higher numbered siblings
at the same time as lower numbered siblings. But when that lower
number sibling is dis-allowed, the higher numbered sibling is
never processed. The result is a time delta of 0, which results
in a divide by 0 for any of the "per-second" metrics.
Enhance the HT enumeration code to record all siblings (up to SMT4).
Consult this complete HT sibling list to determine when
to process an HT sibling, and when to skip it.
Fixes: a2b4d0f8bf ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
"turbostat --cpu-set 0" appears to hang if cpu0 has an HT sibling.
This is because the initialization code recognizes that it does not
have to open perf files for the HT sibling, but the HT support
in the collection code sees the HT sibling and tries to read
from an uninitialized file descriptor, 0 (standard input).
Access HT siblings only when they are in the allowed set.
Fixes: a2b4d0f8bf ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
The '-P' short option (shorthand for --no-perf) is not present in the
optstring of the second call to getopt_long_only(). This results in
the "unrecognized option" error when the tool reaches the main parsing
loop.
Add 'P' to the second getopt_long_only() call to ensure it is
consistently recognized.
Fixes: a0e86c90b8 ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260413211240.853662-1-michael.bommarito@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
The driver calls ioremap() on the HGA video memory at 0xb0000 without
first reserving the physical address range. This leaves the kernel
resource tree incomplete and can cause silent conflicts with other
drivers claiming the same range.
Add a devm_request_mem_region() call before ioremap() in
hga_card_detect() to reserve the memory region.
Signed-off-by: Hardik Phalet <hardik.phalet@pm.me>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Since the crypto library API is now being used instead of crypto_shash,
all structs for MAC computation are now just fixed-size structs
allocated on the stack; no dynamic allocations are ever required.
Besides being much more efficient, this also means that the
'allocate_crypto' argument to smb2_calc_signature() and
smb3_calc_signature() is no longer used. Remove this unused argument.
Acked-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since the crypto library API is now being used instead of crypto_shash,
generate_key() can no longer fail. Make it return void and simplify the
callers accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since the crypto library API is now being used instead of crypto_shash,
the "cmac(aes)" crypto_shash that is being allocated and stored in
'struct cifs_secmech' is no longer used. Remove it.
That makes the kconfig selection of CRYPTO_CMAC and the module softdep
on "cmac" unnecessary. So remove those too.
Finally, since this removes the last use of crypto_shash from the smb
client, also remove the remaining crypto_shash-related helper functions.
Note: cifs_unicode.c was relying on <linux/unaligned.h> being included
transitively via <crypto/internal/hash.h>. Since the latter include is
removed, make cifs_unicode.c include <linux/unaligned.h> explicitly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert smb3_calc_signature() to use the AES-CMAC library instead of a
"cmac(aes)" crypto_shash.
The result is simpler and faster code. With the library there's no need
to allocate memory, no need to handle errors except for key preparation,
and the AES-CMAC code is accessed directly without inefficient indirect
calls and other unnecessary API overhead.
For now a "cmac(aes)" crypto_shash is still being allocated in
'struct cifs_secmech'. Later commits will remove that, simplifying the
code even further.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Set it to number of currently defined algorithms (6 as of now).
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
