* for-next/selftests:
kselftest/arm64: Add 2025 dpISA coverage to hwcaps
kselftest/arm64: Add tests for POR_EL0 save/reset/restore
kselftest/arm64: Move/add POE helpers to test_signals_utils.h
kselftest/arm64: Add POE as a feature in the signal tests
selftests/mm: Fix resv_sz when parsing arm64 signal frame
* for-next/mm: (24 commits)
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: mm: Unmap kernel data/bss entirely from the linear map
arm64: mm: Map the kernel data/bss read-only in the linear map
mm: Make empty_zero_page[] const
sh: Drop cache flush of the zero page at boot
powerpc/code-patching: Avoid r/w mapping of the zero page
arm64: mm: Don't abuse memblock NOMAP to check for overlaps
arm64: Move fixmap and kasan page tables to end of kernel image
arm64: mm: Permit contiguous attribute for preliminary mappings
arm64: kfence: Avoid NOMAP tricks when mapping the early pool
arm64: mm: Permit contiguous descriptors to be manipulated
arm64: mm: Preserve non-contiguous descriptors when mapping DRAM
arm64: mm: Preserve existing table mappings when mapping DRAM
...
* for-next/misc:
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64: patching: replace min_t with min in __text_poke
ARM64: remove unnecessary architecture-specific <asm/device.h>
arm64: Implement _THIS_IP_ using inline asm
arm64: panic from init_IRQ if IRQ handler stacks cannot be allocated
arm64: smp: Do not mark secondary CPUs possible under nosmp
arm64/daifflags: Make local_daif_*() helpers __always_inline
* for-next/fpsimd-cleanups:
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
arm64: fpsimd: Use opaque type for SME state
arm64: fpsimd: Use opaque type for SVE state
arm64: fpsimd: Move fpsimd save/restore inline
arm64: fpsimd: Split FPSR/FPCR from SVE save/restore
arm64: sysreg: Add FPCR and FPSR
arm64: fpsimd: Move sve_get_vl() and sme_get_vl() inline
arm64: fpsimd: Use assembler for baseline SME instructions
arm64: fpsimd: Use assembler for SVE instructions
arm64: fpsimd: Remove sve_set_vq() and sme_set_vq()
arm64: fpsimd: Fold sve_init_regs() into do_sve_acc()
KVM: arm64: pkvm: Remove struct cpu_sve_state
KVM: arm64: pkvm: Save host FPMR in host cpu context
KVM: arm64: Don't override FFR save/restore argument
KVM: arm64: Don't include <asm/fpsimdmacros.h>
arm64: fpsimd: Fix type mismatch in sme_{save,load}_state()
arm64: fpsimd: Fix type mismatch in sve_{save,load}_state()
Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers.
This patch also disables BH when transmitting the skb to address a
possible migration to different CPU leading to imbalanced decrementation
of the recursion counters.
This is modeled after Florian Westphal's dev_xmit_recursion*() API
available since commit 97cdcf37b5 ("net: place xmit recursion in
softnet data") according to its current state in the tree.
Fixes: 1d47b55b36 ("netfilter: nft_fwd_netdev: use recursion counter in neigh egress path")
Fixes: f37ad91270 ("netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix the docutils error reported by kernel test robot
for the new conn_max sysctl:
Documentation/networking/ipvs-sysctl.rst:76: WARNING: Block quote ends
without a blank line; unexpected unindent. [docutils]
Documentation/networking/ipvs-sysctl.rst:76: ERROR: Unexpected section
title or transition.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606071851.Dc1H7hOO-lkp@intel.com/
Fixes: 4a15044a2b ("ipvs: add conn_max sysctl to limit connections")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If forward path discovery fails for any reason or netdevice is not
registered for this flowtable, then bail out to classic forwarding path
rather than providing incomplete forwarding path.
Update the existing forward path parser functions to report an error
so the flow_offload expressions gives up on setting up the flowtable
entry.
Link: https://sashiko.dev/#/patchset/20260607094954.48892-15-pablo%40netfilter.org?part=14
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_ct_ext_find() might return NULL if ct extension is not found.
Add also the null checks to:
- nfct_help()
- nfct_help_data()
- nfct_seqadj()
- nfct_nat()
This is defensive, for safety reasons.
nf_ct_ext_find() used to return NULL if the extension is stale for
unconfirmed conntracks if the genid validation fails.
Skip NULL check in nf_nat_inet_fn() given this is valid to be NULL
for non-initialized ct nat extensions.
While at it, fetch ct helper area in nf_ct_expect_related_report() only
once and pass it on to other ancilliary functions. Replace WARN_ON()
by WARN_ON_ONCE() in nf_ct_unlink_expect_report().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Another drive-by AI review:
1) tree_gc_worker fails to wrap around after it can't find more pending
work. Update data->gc_tree unconditionally. If its 0, start from
the first pending tree (which can be 0).
2) tree_gc_worker() iterates the rbtree without lock. This is never
safe. Move iteration under the spinlock. If this takes too long
(resched needed), save key of next node, drop lock, resched, re-lock,
then search for the key (node). In very rare cases this node might
no longer exist, in that case we can just wait for next gc.
3) use disable_work_sync(), we don't want any restarts.
4) module exit function needs rcu_barrier before we zap the kmem cache.
Fixes: 5c789e131c ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Closes: https://sashiko.dev/#/patchset/20260525182924.28456-1-fw%40strlen.de
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There a two issues with traversal:
1. Key lookup (tree search) cannot detect concurrent modifications and may
not find a result in case of parallel modification.
2. Worker does a lockless iteration. This is never safe.
Add a sequence counter and re-do the lookup under lock in case the
tree was modified / seqcount changed.
gc_worker bugs are addressed in the next patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add find_tree_node() helper that fetches a matching rbtree node.
This is used by followup patch to optionally search the tree again while
preventing concurrent updates via tree lock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This change replaces the rb_root with a new container structure.
Instead of an array of locks shared by all nf_conncount_data objects,
each tree gains its own dedicated lock.
Downside: nf_conncount_data increases in size. Before this change:
struct nf_conncount_data {
[..]
/* --- cacheline 33 boundary (2112 bytes) was 16 bytes ago --- */
unsigned int gc_tree; /* 2128 4 */
/* size: 2136, cachelines: 34, members: 7 */
/* padding: 4 */
After:
/* size: 4184, cachelines: 66, members: 7 */
/* padding: 4 */
On LOCKDEP enabled kernels, this is even worse:
/* size: 18560, cachelines: 290, members: 7 */
(due to lockdep map in each spinlock).
For this reason also switch to kvzalloc. The zeroing variant is needed
to not start with random (heap memory content) in the ->pending_trees
bitmap.
Followup patch will add and use a sequence counter.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
rcu_derefence_raw() should not have been used here, it concealed this bug.
Its used because struct rb_node lacks __rcu annotated pointers, so plain
rcu_derefence causes sparse warnings.
The major tradeoff is that rcu_derefence_raw() doesn't warn when the caller
isn't in a rcu read section.
Extend the rcu read lock scope accordingly and cause sparse warnings,
those warnings are the lesser evil.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Closes: https://sashiko.dev/#/patchset/20260603230610.7900-1-fw%40strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace raw warning macros with DEBUG_NET_WARN_ON_ONCE across the
nf_tables API, core engine, and expression evaluations. This prevents
unnecessary system panics when panic_on_warn=1 is enabled in production
systems.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch continues the effort to refactor workqueue APIs, which has
begun with the changes introducing new workqueues and a new
alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior
of workqueues to become unbound by default so that their workload
placement is optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better
named new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can
be removed in the future.
This specific work is considered long, so enqueue it using
system_dfl_long_wq instead of system_dfl_wq.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
TVLV handlers can have the flag BATADV_TVLV_HANDLER_OGM_CIFNOTFND set to
signal that the OGM handler should be called (with NULL for data) when the
specific TVLV container was not found in the OGM. This is used by:
* DAT
* GW
* Multicast (OGM + Tracker)
The state whether the handler was executed was stored in the struct
batadv_tvlv_handler. But the TVLV processing is started without any lock.
Multiple parallel contexts processing TVLVs would therefore overwrite each
others BATADV_TVLV_HANDLER_OGM_CALLED flag in the shared
batadv_tvlv_handler.
Drop the shared BATADV_TVLV_HANDLER_OGM_CALLED flag and instead determine,
per TVLV buffer, whether a matching container was present by scanning the
packet's buffer.
Cc: stable@kernel.org
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
snd_seq_fifo_resize() still needs to publish the replacement pool
before it waits for FIFO users. A blocking snd_seq_read() holds
f->use_lock while it sleeps, so concurrent senders must be able to
queue to the new pool and wake that reader instead of failing against a
closing old pool.
However, snd_seq_fifo_event_in() duplicates an event before it takes
f->lock, and snd_seq_read() can dequeue a cell and later call
snd_seq_fifo_cell_putback() if copy_to_user() or
snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches
oldhead in between, either path can relink an old-pool cell after the
snapshot. That stale cell sits outside the drained oldhead list, keeps
oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting
for the retired pool to drain.
Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(),
but reject stale cells before any FIFO relink. Revalidate event-in cells
under f->lock and retry them against the published replacement pool, and
free stale putback cells instead of linking them back into the FIFO.
The buggy scenario involves two paths, with each column showing the
order within that path:
resize path: relink path:
1. Allocate newpool. 1. Take f->use_lock.
2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool
detach oldhead. cell before oldpool closes.
3. Mark oldpool closing and 3. Reach a later relink point after
wait for FIFO users. resize published newpool.
4. Free oldhead and delete 4. Relink the old-pool cell after
oldpool. resize detached oldhead.
5. Drop f->use_lock.
The reproducer reports a resize ioctl blocked in the expected pool
teardown path:
signal: resize iteration=98 target_pool=4 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=651 wchan=snd_seq_pool_done
diagnostic: resize_tid=651 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
A second run with larger pools hit the same target path:
signal: resize iteration=32 target_pool=64 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=663 wchan=snd_seq_pool_done
diagnostic: resize_tid=663 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 2d7d54002e ("ALSA: seq: Fix race during FIFO resize")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260614004801.3507773-2-zzzccc427@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fields of an aggregated OGM(v2) are accessed assuming (at least) 2-byte
alignment, so a following OGM must start at an even offset. As the header
length is even, an odd tvlv_len would misalign it and trigger unaligned
accesses on strict-alignment architectures.
Such a misaligned TVLV/OGM/OGMv2 is not created by a normal participant in
the mesh. Therefore, reject such malformed packets.
Cc: stable@kernel.org
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
snd_seq_oss_readq_clear() resets qlen, head, and tail without
q->lock even though the normal reader and producer paths serialize the
same ring state under that spinlock. A reset can therefore race
snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave
stale records in the queue, drop freshly queued ones, or report the
wrong readiness after wakeup. KCSAN reports a data race between
snd_seq_oss_readq_clear() and snd_seq_oss_readq_free().
Take q->lock while clearing the ring and resetting input_time. Factor
the enqueue logic into a caller-locked helper so
snd_seq_oss_readq_put_timestamp() updates its suppression state under
the same lock instead of racing the reset path.
The buggy scenario involves two paths, with each column showing the
order within that path:
reset path: locked readq updater:
1. snd_seq_oss_reset() or 1. A reader or callback producer
release reaches takes q->lock on the same queue.
snd_seq_oss_readq_clear().
2. snd_seq_oss_readq_clear() 2. The updater tests or modifies
resets qlen, head, tail, qlen, head, and tail.
and input_time.
3. snd_seq_oss_readq_clear() 3. The updater completes its
wakes sleepers on read-modify-write sequence.
q->midi_sleep.
4. Without q->lock, the reset 4. The resulting ring state drives
can overlap the locked later reads and readiness.
update.
KCSAN reports:
BUG: KCSAN: data-race in snd_seq_oss_readq_clear /
snd_seq_oss_readq_free
write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0:
snd_seq_oss_readq_free+0x6c/0x80
snd_seq_oss_read+0xcb/0x250
odev_read+0x38/0x60
vfs_read+0xff/0x600
ksys_read+0xb4/0x140
__x64_sys_read+0x46/0x60
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1:
snd_seq_oss_readq_clear+0x1f/0x90
snd_seq_oss_reset+0xa7/0xf0
snd_seq_oss_ioctl+0x6f6/0x7e0
odev_ioctl+0x56/0xc0
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000001 -> 0x00000000
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260614004801.3507773-1-zzzccc427@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kcm_attach() replaces a live lower TCP socket's sk_data_ready and
sk_write_space callbacks with KCM handlers, and kcm_unattach() restores
them later. Those callback-pointer updates are still plain stores even
though the same fields can be read and invoked concurrently on other
CPUs.
If another CPU observes an older callback snapshot after the live field
has already been restored, callback execution can run with a mismatched
target and sk_user_data state, leading to stale or misdirected wakeups.
Use WRITE_ONCE() for the callback replacement and restore operations so
these shared callback fields follow the same visibility contract already
established by the earlier 4022 fixes.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260611053543.2429462-1-runyu.xiao@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The local hash of DAT entries is supposed to be VLAN (VID) aware. But
the adding to the hash and the search in the hash were not checking the VID
information of the hash entries. The entries would therefore only be
correctly separated when batadv_hash_dat() didn't select the same buckets
for different VIDs.
Cc: stable@kernel.org
Fixes: be1db4f661 ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tt_check_roam_count() is supposed to track roaming of a TT entry.
But TT entries are for a MAC + VID. The VID was completely missed and thus
leads to incorrect detection of ROAM counts when a client MAC exists in
multiple VLANs.
Cc: stable@kernel.org
Fixes: c018ad3de6 ("batman-adv: add the VLAN ID attribute to the TT entry")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tt_local_event() merges/cancels events for the same client which
would conflict or be duplicates. The matching of the queued events only
compares the MAC address - the VLAN ID stored in each event is ignored.
If a MAC would now appear on multiple VID, the two ADD change events (for
VID 1 and VID 2) would be merged to a single vid event. The remote can
therefore not calculate the correct TT table and desync. A full translation
table exchange is required to recover from this state.
A check of VID is therefore necessary to avoid such wrong merges/cancels.
Cc: stable@kernel.org
Fixes: c018ad3de6 ("batman-adv: add the VLAN ID attribute to the TT entry")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
-----BEGIN PGP SIGNATURE-----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=A+i2
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
IIO: 2nd set of fixes for the 7.1 cycle.
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
* tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
iio: light: opt3001: fix missing state reset on timeout
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
iio: core: fix uninitialized data in debugfs
iio: backend: fix uninitialized data in debugfs
iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source()
iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
iio: light: al3320a: read both ALS ADC registers again
iio: light: al3010: read both ALS ADC registers again
iio: temperature: tmp006: use devm_iio_trigger_register
iio: buffer: hw-consumer: free scan_mask on buffer release
iio: adc: ad7768-1: Select GPIOLIB
iio: light: veml6030: fix channel type when pushing events
iio: light: acpi-als: Check ACPI_COMPANION() against NULL
iio: resolver: ad2s1210: notify trigger and clear state on fault read error
iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths
iio: gyro: bmg160: wait full startup time after mode change at probe
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
iio: pressure: bmp280: zero-init bmp580 trigger handler buffer
...
When compiling with sparse enabled (C=2), bitwise type warnings are
triggered in the RISC-V KVM implementation. This occurs because the
user-space data unboxing macro '__get_user_asm' performs implicit
casting on restricted types without forcing the compiler's compliance.
Additionally, raw 'unsigned long *' pointers are used to access the
SBI NACL shared memory, whereas the RISC-V SBI specification mandates
that these structures must follow little-endian byte ordering.
Fix these by:
1. Adding a '__force' cast to '__get_user_asm()' to safely suppress
implicit cast warnings during user-space data fetching.
2. Introducing the '__lelong' type macro, which dynamically resolves to
'__le32' or '__le64' depending on XLEN, and replacing 'unsigned long *'
with '__lelong *' to enforce proper compile-time endianness checks.
Signed-off-by: Sean Chang <seanwascoding@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260608155252.4292-1-seanwascoding@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Fix two kernel-doc warnings:
- non-kernel-doc comment marked with '/**' in af_unix.c
- documented symbol name mismatch for aa_get_i_loaddata() in
policy_unpack.h
No functional changes.
Signed-off-by: Rodrigo Zaiden <rodrigoffzz@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
multi_transaction_new() allocates memory with get_zeroed_page() and uses
it as struct multi_transaction.
The usage of that structure does not require struct page access and it is
better to allocate multi_transaction objects with kzalloc() that provides
better scalability and more debugging possibilities.
Replace use of get_zeroed_page() with kzalloc().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix two spelling errors in comment:
- interated → interacted
- dont → don't
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4d ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles.
Fixes: a0b7091c4d ("apparmor: fix race on rawdata dereference")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221513
Cc: stable@vger.kernel.org
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
cache_hold_inc() prevents the per-CPU cache hold counter from
rising above MAX_HOLD_COUNT, but the comparison is inverted
(> MAX_HOLD_COUNT instead of <), so the counter never rises
above 0.
This breaks the cache mechanism because since the hold counter
is always 0, the global pool is always attempted first before
falling back to the local cache. The decrement also never occurs,
thus the hold counter is effectively dead.
Fix by changing > to < in cache_hold_inc().
Fixes: 0b6a6b72b3 ("apparmor: document the buffer hold, add an overflow guard")
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
In
commit 4a134723f9 ("apparmor: move check for aa_null file to cover all cases")
there was a change to not audit files pointing to
aa_null.dentry because they provide no value, but setting the error
variable instead of returning -EACCES was still causing them to be
audited.
Fixes: 4a134723f9 ("apparmor: move check for aa_null file to cover all cases")
Acked-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
apparmor_secmark_init() parses a configured secmark label to obtain its
secid. aa_label_strn_parse() returns a refcounted label, but the success
path kept that reference after copying the secid.
Fixes: ab9f211508 ("apparmor: Allow filtering based on secmark policy")
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_getprocattr() allocates the output string before rendering the label
into it. If the second aa_label_snxprint() call fails, the function
returned without freeing that allocation.
Free and clear the output pointer on the uncommon formatting failure path
before dropping the namespace reference.
Fixes: 76a1d263ab ("apparmor: switch getprocattr to using label_print fns()")
Reviewed-by: Tyler Hicks <code@thicks.com>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
Signed-off-by: John Johansen <john.johansen@canonical.com>
There is no need for a goto a label immediately following the
conditional block when the jump is the last statement in the block.
Fixes: 7306c41672 ("apparmor: release exe file resources on path failure")
Signed-off-by: John Johansen <john.johansen@canonical.com>
get_current_exe_path() takes both an exe_file reference and a path
reference before resolving the path name. If aa_path_name() failed, it
returned immediately and leaked both references.
Route the failure through the common cleanup path so fput() and path_put()
always run after the references are acquired.
Fixes: 8d34e16f7f ("apparmor: userns: Add support for execpath in userns")
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
Signed-off-by: John Johansen <john.johansen@canonical.com>
unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy
data. If that allocation failed, it set an error message but jumped to the
success path, returning a policydb with the required table missing.
Return -ENOMEM through the normal failure path when the ACCEPT2 allocation
fails. Remove the now-unused out label.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Return NULL instead of passing to ERR_PTR while error is zero.
Fixes smatch warning:
- security/apparmor/apparmorfs.c:1846 ns_mkdir_op() warn:
passing zero to 'ERR_PTR'
Fixes: 88d5baf690 ("Change inode_operations.mkdir to return struct dentry *")
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When the export_binary parameter is set, then rawdata is available and
there should be a symbolic link for the rawdata in the profile
directory in apparmorfs. If the parameter is unset, then the symlinks
should not exist.
The issue arises when changing the value of export_binary on runtime
and replacing profiles. If export_binary was set when the profile was
originally loaded, then changed to 0 and the profile was reloaded,
then the symbolic links would still exist but would return ENOENT
because the rawdata no longer exists.
On the opposite side, if export_binary was unset when the profile was
originally loaded, then changed to 1 and the profile was reloaded,
then the symbolic links would not exist, even though the rawdata does.
Fixes: d61c57fde8 ("apparmor: make export of raw binary profile to userspace optional")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer
dereference.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently fn_label_build() callback fns must provide a transition or
failure. Change this so that a callback can indicate it should be
skipped/not be involved in the label being built.
This will be useful when building object labels based on mediation
flags, as to whether the label should be set.
Existing callers can keep treating NULL return as an error because
none of those callback fns support skipping, but instead of the old
error handling replace with AA_BUG.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Previously fn_label_build() was accepting a NULL which represented
ENOMEM return and ERR_PTR for errors.
Clean this up by requiring the cb fn to return an ERR_PTR or valid
value.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference.
Fixes: 5ac8c355ae ("apparmor: allow introspecting the loaded policy pre internal transform")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
profiles can be pinned by file and other references, and can live long
after they have been replaced/removed. The rawdata however is no longer
needed, and can be freed earlier than the rest of the profile.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
There was a race condition involving change_hat and profile replacement in
which replacement of the parent profile during a changehat operation could
result in the list of children becoming empty and the changehat operation
failing. To prevent this:
- grab the namespace lock until we've built the hat transition, and
- use aa_get_newest_profile to avoid using stale profile objects.
Link: https://bugs.launchpad.net/bugs/2139664
Fixes: 89dbf1962a ("apparmor: move change_hat mediation to using labels")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
