The x86 maintainers handle the resctrl filesystem and x86 architectural
resctrl code. Even so, the x86 maintainers are not part of the resctrl
section and not returned when scripts/get_maintainer.pl is run on resctrl
filesystem code. With patches flowing via x86 maintainers resctrl should
also ensure it follows the tip rules.
Add the x86 maintainer alias, x86@kernel.org, to the resctrl section to
ensure x86 maintainers are included in associated resctrl submissions.
Add a reference to the tip tree handbook to make it clear which rules
resctrl follows.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/4c14dd82e81737c6413e10fe097475b1cc0886fc.1775576382.git.reinette.chatre@intel.com
The correct kfunc name is scx_bpf_dsq_move_to_local(), not
scx_bpf_move_to_local(). Fix the two references in the
Scheduling Cycle section.
Signed-off-by: fangqiurong <fangqiurong@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
use NR_STD_WORKER_POOLS for irq_work_fns[] array definition.
NR_STD_WORKER_POOLS is also 2, but better to use MACRO.
Initialization loop for_each_bh_worker_pool() also uses same MACRO.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
PCI drivers can use a device-tree overlay to describe the hardware
available on the PCI board. This is the case, for instance, of the
LAN966x PCI device driver.
Adding some more nodes in the device-tree overlay adds some more
consumer/supplier relationship between devices instantiated from this
overlay.
Those fw_node consumer/supplier relationships are handled by fw_devlink
and are created based on the device-tree parsing done by the
of_fwnode_add_links() function.
Those consumer/supplier links are needed in order to ensure a correct PM
runtime management and a correct removal order between devices.
For instance, without those links a supplier can be removed before its
consumers is removed leading to all kind of issue if this consumer still
want the use the already removed supplier.
The support for the usage of an overlay from a PCI driver has been added
on x86 systems in commit 1f34072441 ("PCI: of: Create device tree PCI
host bridge node").
In the past, support for fw_devlink on x86 had been tried but this
support has been removed in commit 4a48b66b3f ("of: property: Disable
fw_devlink DT support for X86"). Indeed, this support was breaking some
x86 systems such as OLPC system and the regression was reported in [0].
Instead of disabling this support for all x86 system, use a finer grain
and disable this support only for the possible problematic subset of x86
systems (at least OLPC and CE4100).
Those systems use a device-tree to describe their hardware. Identify
those systems using key properties in the device-tree.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/lkml/3c1f2473-92ad-bfc4-258e-a5a08ad73dd0@web.de/ [0]
Link: https://patch.msgid.link/20260325143555.451852-18-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
As far as I can tell, we never intentionally constrained ourselves to
these status codes, and it is misleading and surprising to lack the
bdev error logging when we get a different error code from the block
layer. This can lead to jumping to a wrong conclusion like "this
system didn't see any bio failures but aborted with EIO".
For example on nvme devices, I observe many failures coming back as
BLK_STS_MEDIUM. It is apparent that the nvme driver returns a variety of
BLK_STS_* status values in nvme_error_status().
So handle the known expected errors and make some noise on the rest
which we expect won't really happen.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
can_finish_ordered_extent() and btrfs_finish_ordered_zoned() set
BTRFS_ORDERED_IOERR via bare set_bit(). Later,
btrfs_mark_ordered_extent_error() in btrfs_finish_one_ordered() uses
test_and_set_bit(), finds it already set, and skips
mapping_set_error(). The error is never recorded on the inode's
address_space, making it invisible to fsync. For encoded writes this
causes btrfs receive to silently produce files with zero-filled holes.
Fix: replace bare set_bit(BTRFS_ORDERED_IOERR) with
btrfs_mark_ordered_extent_error() which pairs test_and_set_bit() with
mapping_set_error(), guaranteeing the error is recorded exactly once.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_finish_one_ordered(), clear_bits is unconditionally initialized
with EXTENT_DEFRAG. For NOCOW ordered extents this is always a no-op
because should_nocow() already forces the COW path when EXTENT_DEFRAG is
set, so a NOCOW ordered extent can never have EXTENT_DEFRAG on its range.
Although harmless, the unconditional btrfs_clear_extent_bit() call still
performs a cold rbtree lookup under the io tree spinlock on every NOCOW
write completion. Avoid this by only adding EXTENT_DEFRAG to clear_bits
for non-NOCOW ordered extents, and skip the call entirely when there are
no bits to clear.
Signed-off-by: Dave Chen <davechen@synology.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The UUID tree rescan check in open_ctree() compares
fs_info->generation with the superblock's uuid_tree_generation.
This comparison is not reliable because fs_info->generation is
bumped at transaction start time in join_transaction(), while
uuid_tree_generation is only updated at commit time via
update_super_roots().
Between the early BTRFS_FS_UPDATE_UUID_TREE_GEN flag check and the
late rescan decision, mount operations such as file orphan cleanup
from an unclean shutdown start transactions without committing
them. This advances fs_info->generation past uuid_tree_generation
and produces a false-positive mismatch.
Use the BTRFS_FS_UPDATE_UUID_TREE_GEN flag directly instead. The
flag was already set earlier in open_ctree() when the generations
were known to match, and accurately represents "UUID tree is up to
date" without being affected by subsequent transaction starts.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chen <davechen@synology.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we get an error during the transaction commit path, we are resetting
current->journal_info to NULL twice - once in btrfs_commit_transaction()
right before calling cleanup_transaction() and then once again inside
cleanup_transaction(). Remove the instance in btrfs_commit_transaction().
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Having the filesystem in an error state, meaning we had a transaction
abort, is unexpected. Mark every check for the error state with the
unlikely annotation to convey that and to allow the compiler to generate
better code.
On x86_64, using gcc 14.2.0-19 from Debian, resulted in a slightly
reduced object size and better code.
Before:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
2008598 175912 15592 2200102 219226 fs/btrfs/btrfs.ko
After:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
2008450 175912 15592 2199954 219192 fs/btrfs/btrfs.ko
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Add a quirk for JMicron JMB582/JMB585 AHCI controllers such that they
only use 32-bit DMA addresses. While these controllers do report that
they support 64-bit DMA addresses, a user reports that using 64-bit
DMA addresses cause silent corruption even on modern x86 systems
(Arthur)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCadS6pAAKCRDJZDGjmcZN
cowpAP9ljy693Ws/xSTz7R0+d4tmlLxS5onYxh3VV52j0k7msAD/SQpxFt8pnhfJ
SdfnpJc97cHQuVxUBxtWEAbgcdPRNQg=
=jDuQ
-----END PGP SIGNATURE-----
Merge tag 'ata-7.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Add a quirk for JMicron JMB582/JMB585 AHCI controllers such that
they only use 32-bit DMA addresses.
While these controllers do report that they support 64-bit DMA
addresses, a user reports that using 64-bit DMA addresses cause
silent corruption even on modern x86 systems (Arthur)
* tag 'ata-7.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnUhoYTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXtIDCACrMU/FIxC/S3IcN5Nm60X194C2HpsW
qKZdpuFb9fxbJhHiZjwNbBsvaS8+kBQTRUiJalNgv3bYZ8y7Umt8tLNiDfgCGxRM
oAiab6AwQhskchO1mXX2L6FACY9uS2NsTgEfIHU3+EKW9blX4yJodDRpTecOdI0o
Ejxh2/xOC5hGHqYjol3EoDRMvn727audRKQeKDP8dh9Rn6RCbt08QinidSqpzGjI
Ts2i4kgaL7WQEfXyK6qrOoP4oJ6mHCu6bM/wwMkmCMLoDwwvZ32YZ3b+LMoTmSeH
FIr7mTd7loIpdVcmuSKXpjbRQgfiVLz0rEnYxy6o1XDjSpsMLdORvY44
=XSUS
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20260406' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Two fixes for Hyper-V PCI driver (Long Li, Sahil Chandna)
- Fix an infinite loop issue in MSHV driver (Stanislav Kinsburskii)
* tag 'hyperv-fixes-signed-20260406' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: Fix infinite fault loop on permission-denied GPA intercepts
PCI: hv: Fix double ida_free in hv_pci_probe error path
PCI: hv: Set default NUMA node to 0 for devices without affinity info
All are singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCadQzWgAKCRDdBJ7gKXxA
jp58AP9C4nNI7ReZ9hyH3xg32JZIszk8vzwRUZte/HvvY6YsXQEAt94DZnO8wa3k
DoYYRjIi9PfhZzI4aRJFXgANWI+0twc=
=VqfR
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-04-06-15-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Eight hotfixes. All are cc:stable and seven are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-04-06-15-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
mm/damon/stat: deallocate damon_call() failure leaking damon_ctx
mm/vma: fix memory leak in __mmap_region()
mm/memory_hotplug: maintain N_NORMAL_MEMORY during hotplug
mm/damon/sysfs: dealloc repeat_call_control if damon_call() fails
mm: reinstate unconditional writeback start in balance_dirty_pages()
liveupdate: propagate file deserialization failures
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
Fixed PCM device numbering is required for acp pdm dmic pcm device
to have a common UCM changes.
Set the 'use_dai_pcm_id' flag true in acp pdm dma driver for acp 6.3
platform. This will fix the pcm device numbering based on dai_link->id.
Fixes: 33cea6bbe4 ("ASoC: amd: add acp6.2 pdm platform driver")
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Fixes: tag.
Link: https://patch.msgid.link/20260403100624.676953-1-syed.sabakareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Route DETACH_DEBUG_BO through aie2_config_debug_bo() the same way as
ATTACH_DEBUG_BO.
The scheduler switch in aie2_sched_job_run() already handles
ATTACH_DEBUG_BO with aie2_config_debug_bo(), but DETACH_DEBUG_BO was
not included in that path. Add an explicit fallthrough so both attach
and detach operations use the same handler.
This fixes debug BO detach handling by ensuring the detach command is
processed by the expected configuration path.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260406211403.4011988-1-lizhi.hou@amd.com
In alarmtimer_suspend(), timerqueue_getnext() is called under
base->lock, but next->expires is read after the lock is released.
This is safe because suspend freezes all relevant task contexts,
but reading the node while holding the lock makes the code easier
to reason about and not worry about a theoretical UAF.
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407143627.19405-1-zhanxusheng@xiaomi.com
Qualcomm Hawi SoC include apps smmu that implements arm,mmu-500, which
is used to translate device-visible virtual addresses to physical
addresses. Add compatible for these items.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When kobject_init_and_add() fails, the call chain is:
create_space_info()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&space_info->kobj)
-> space_info_release()
-> kfree(space_info)
Then control returns to create_space_info():
btrfs_sysfs_add_space_info_type() returns error
-> goto out_free
-> kfree(space_info)
This causes a double free.
Keep the direct kfree(space_info) for the earlier failure path, but
after btrfs_sysfs_add_space_info_type() has called kobject_put(), let
the kobject release callback handle the cleanup.
Fixes: a11224a016 ("btrfs: fix memory leaks in create_space_info() error paths")
CC: stable@vger.kernel.org # 6.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When kobject_init_and_add() fails, the call chain is:
create_space_info_sub_group()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&sub_group->kobj)
-> space_info_release()
-> kfree(sub_group)
Then control returns to create_space_info_sub_group(), where:
btrfs_sysfs_add_space_info_type() returns error
-> kfree(sub_group)
Thus, sub_group is freed twice.
Keep parent->sub_group[index] = NULL for the failure path, but after
btrfs_sysfs_add_space_info_type() has called kobject_put(), let the
kobject release callback handle the cleanup.
Fixes: f92ee31e03 ("btrfs: introduce btrfs_space_info sub-group")
CC: stable@vger.kernel.org # 6.18+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report that a btrfs with running dev-replace got rejected
with the following messages:
BTRFS error (device sdk1): devid 0 path /dev/sdk1 is registered but not found in chunk tree
BTRFS error (device sdk1): remove the above devices or use 'btrfs device scan --forget <dev>' to unregister them before mount
BTRFS error (device sdk1): open_ctree failed: -117
[CAUSE]
The tree and super block dumps show the fs is completely sane, except
one thing, there is no dev item for devid 0 in chunk tree.
However this is not a bug, as we do not insert dev item for devid 0 in
the first place.
Since the devid 0 is only there temporarily we do not really need to
insert a dev item for it and then later remove it again.
It is the commit 3430818739 ("btrfs: add extra device item checks at
mount") adding a overly strict check that triggers a false alert and
rejected the valid filesystem.
[FIX]
Add a special handling for devid 0, and doesn't require devid 0 to
have a device item in chunk tree.
Reported-by: Jaron Viëtor <jaron@vietors.com>
Link: https://lore.kernel.org/linux-btrfs/CAF1bhLVYLZvD=j2XyuxXDKD-NWNJAwDnpVN+UYeQW-HbzNRn1A@mail.gmail.com/
Fixes: 3430818739 ("btrfs: add extra device item checks at mount")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In close_ctree(), we call invalidate_inode_pages2() to invalidate all
pages from btree inode.
But the problem is, it never returns 0, but always -EBUSY.
The problem is that we are still holding all the essential tree root
nodes, thus pages holding those tree blocks can not be invalidated thus
invalidate_inode_pages2() always returns -EBUSY.
This is also against the error cleanup path of open_ctree(), which
properly frees all root pointers before calling invalidate_inode_pages().
So fix the order by delaying invalidate_inode_pages2() until we have
freed all root pointers.
Reviewed-by: Anand Jain <asj@kernel.org>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Under memory pressure, direct reclaim can kick in during compressed
readahead. This puts the associated task into D-state. Then shrink_lruvec()
disables interrupts when acquiring the LRU lock. Under heavy pressure,
we've observed reclaim can run long enough that the CPU becomes prone to
CSD lock stalls since it cannot service incoming IPIs. Although the CSD
lock stalls are the worst case scenario, we have found many more subtle
occurrences of this latency on the order of seconds, over a minute in some
cases.
Prevent direct reclaim during compressed readahead. This is achieved by
using different GFP flags at key points when the bio is marked for
readahead.
There are two functions that allocate during compressed readahead:
btrfs_alloc_compr_folio() and add_ra_bio_pages(). Both currently use
GFP_NOFS which includes __GFP_DIRECT_RECLAIM.
For the internal API call btrfs_alloc_compr_folio(), the signature changes
to accept an additional gfp_t parameter. At the readahead call site, it
gets flags similar to GFP_NOFS but stripped of __GFP_DIRECT_RECLAIM.
__GFP_NOWARN is added since these allocations are allowed to fail. Demand
reads still use full GFP_NOFS and will enter reclaim if needed. All other
existing call sites of btrfs_alloc_compr_folio() now explicitly pass
GFP_NOFS to retain their current behavior.
add_ra_bio_pages() gains a bool parameter which allows callers to specify
if they want to allow direct reclaim or not. In either case, the
__GFP_NOWARN flag was added unconditionally since the allocations are
speculative.
There has been some previous work done on calling add_ra_bio_pages() [0].
This patch is complementary: where that patch reduces call frequency, this
patch reduces the latency associated with those calls.
[0] https://lore.kernel.org/linux-btrfs/656838ec1232314a2657716e59f4f15a8eadba64.1751492111.git.boris@bur.io/
Reviewed-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: JP Kobryn (Meta) <jp.kobryn@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cache_save_setup(), if create_free_space_inode() succeeds but the
subsequent lookup_free_space_inode() still fails on retry, the
BUG_ON(retries) will crash the kernel. This can happen due to I/O
errors or transient failures, not just programming bugs.
Replace the BUG_ON with proper error handling that returns the original
error code through the existing cleanup path. The callers already handle
this gracefully: disk_cache_state defaults to BTRFS_DC_ERROR, so the
space cache simply won't be written for that block group.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Teng Liu <27rabbitlt@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The sectorsize is used once or at most twice in the callbacks, no need
to cache it on stack. Minor effect on zstd_compress_folios() where it
saves 8 bytes of stack.
Signed-off-by: David Sterba <dsterba@suse.com>
We're caching the current output folio address but it's not really
necessary as we store it in the variable and then pass it to the stream
context. We can read the folio address directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The LZO_LEN read/write helpers are supposed to be trivial and we're
duplicating the put/get unaligned helpers so use them directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The extent buffer access is checked in other helpers by
check_eb_range(), which validates the requested start, length against
the extent buffer. While this almost never fails we should still handle
it as an error and not just warn.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
There are generic helpers to access extent buffer folio data of any
length, potentially iterating over a few of them. This is a slow path,
either we use the type based accessors or the eb folio allocation is
contiguous and we can use the memcpy/memcmp helpers.
The initialization of 'i' is done at the beginning though it may not be
needed. Move it right before the folio loop, this has minor effect on
generated code in __write_extent_buffer().
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Use proper abbreviation of the 'offset in folio' in the variable name,
same as we have in accessors.c.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The variables calculating where to jump next are using mixed in types
which requires some conversions on the instruction level. Using 'u32'
removes one call to 'movslq', making the main loop shorter.
This complements type conversion done in a724f313f8 ("btrfs: do
unsigned integer division in the extent buffer binary search loop")
Signed-off-by: David Sterba <dsterba@suse.com>
In the main search loop the variable 'oil' (offset in folio) is set
twice, one duplicated when the key fits completely to the contiguous
range. We can remove it and while it's just a simple calculation, the
binary search loop is executed many times so micro optimizations add up.
The code size is reduced by 64 bytes on release config, the loop is
reorganized a bit and a few instructions shorter.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Add some write-time checks for block group items relating to the remap
tree.
Here we're checking:
* That the REMAPPED or METADATA_REMAP flags aren't set unless the
REMAP_TREE incompat flag is also set
* That `remap_bytes` isn't more than the size of the block group
* That `identity_remap_count` isn't more than the number of sectors in
the block group
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions never fail, always return success (0) and none of the
callers care about their return values. Change their return type from int
to void.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When using the flushoncommit mount option, we can have a deadlock between
a transaction commit and a reflink operation that copied an inline extent
to an offset beyond the current i_size of the destination node.
The deadlock happens like this:
1) Task A clones an inline extent from inode X to an offset of inode Y
that is beyond Y's current i_size. This means we copied the inline
extent's data to a folio of inode Y that is beyond its EOF, using a
call to copy_inline_to_page();
2) Task B starts a transaction commit and calls
btrfs_start_delalloc_flush() to flush delalloc;
3) The delalloc flushing sees the new dirty folio of inode Y and when it
attempts to flush it, it ends up at extent_writepage() and sees that
the offset of the folio is beyond the i_size of inode Y, so it attempts
to invalidate the folio by calling folio_invalidate(), which ends up at
btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it
tries to lock the folio's range in inode Y's extent io tree, but it
blocks since it's currently locked by task A - during a reflink we lock
the inodes and the source and destination ranges after flushing all
delalloc and waiting for ordered extent completion - after that we
don't expect to have dirty folios in the ranges, the exception is if
we have to copy an inline extent's data (because the destination offset
is not zero);
4) Task A then attempts to start a transaction to update the inode item,
and then it's blocked since the current transaction is in the
TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the
current transaction to become unblocked (its state >=
TRANS_STATE_UNBLOCKED).
So task A is waiting for the transaction commit done by task B, and
the later waiting on the extent lock of inode Y that is currently
held by task A.
Syzbot recently reported this with the following stack traces:
INFO: task kworker/u8:7:1053 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000
Workqueue: writeback wb_workfn (flush-btrfs-46)
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5298 [inline]
__schedule+0x1553/0x5240 kernel/sched/core.c:6911
__schedule_loop kernel/sched/core.c:6993 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7008
wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline]
btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914
btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline]
btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704
extent_writepage fs/btrfs/extent_io.c:1852 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline]
btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713
do_writepages+0x32e/0x550 mm/page-writeback.c:2554
__writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750
writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042
wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227
wb_do_writeback fs/fs-writeback.c:2374 [inline]
wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414
process_one_work kernel/workqueue.c:3276 [inline]
process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
INFO: task syz.4.64:6910 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.64 state:D stack:22752 pid:6910 tgid:6905 ppid:5944 task_flags:0x400140 flags:0x00080002
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5298 [inline]
__schedule+0x1553/0x5240 kernel/sched/core.c:6911
__schedule_loop kernel/sched/core.c:6993 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7008
wait_current_trans+0x39f/0x590 fs/btrfs/transaction.c:535
start_transaction+0x6a7/0x1650 fs/btrfs/transaction.c:705
clone_copy_inline_extent fs/btrfs/reflink.c:299 [inline]
btrfs_clone+0x128a/0x24d0 fs/btrfs/reflink.c:529
btrfs_clone_files+0x271/0x3f0 fs/btrfs/reflink.c:750
btrfs_remap_file_range+0x76b/0x1320 fs/btrfs/reflink.c:903
vfs_copy_file_range+0xda7/0x1390 fs/read_write.c:1600
__do_sys_copy_file_range fs/read_write.c:1683 [inline]
__se_sys_copy_file_range+0x2fb/0x480 fs/read_write.c:1650
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f73afc799
RSP: 002b:00007f5f7315e028 EFLAGS: 00000246 ORIG_RAX: 0000000000000146
RAX: ffffffffffffffda RBX: 00007f5f73d75fa0 RCX: 00007f5f73afc799
RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007f5f73b92c99 R08: 0000000000000863 R09: 0000000000000000
R10: 00002000000000c0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5f73d76038 R14: 00007f5f73d75fa0 R15: 00007fff138a5068
</TASK>
INFO: task syz.4.64:6975 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.64 state:D stack:24736 pid:6975 tgid:6905 ppid:5944 task_flags:0x400040 flags:0x00080002
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5298 [inline]
__schedule+0x1553/0x5240 kernel/sched/core.c:6911
__schedule_loop kernel/sched/core.c:6993 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7008
wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227
__writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2838
try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2886
btrfs_start_delalloc_flush fs/btrfs/transaction.c:2175 [inline]
btrfs_commit_transaction+0x82e/0x31a0 fs/btrfs/transaction.c:2364
btrfs_ioctl+0xca7/0xd00 fs/btrfs/ioctl.c:5206
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xff/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f73afc799
RSP: 002b:00007f5f7313d028 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f5f73d76090 RCX: 00007f5f73afc799
RDX: 0000000000000000 RSI: 0000000000009408 RDI: 0000000000000004
RBP: 00007f5f73b92c99 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5f73d76128 R14: 00007f5f73d76090 R15: 00007fff138a5068
</TASK>
Fix this by updating the i_size of the destination inode of a reflink
operation after we copy an inline extent's data to an offset beyond the
i_size and before attempting to start a transaction to update the inode's
item.
Reported-by: syzbot+63056bf627663701bbbf@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/69bba3fe.050a0220.227207.002f.GAE@google.com/
Fixes: 05a5a7621c ("Btrfs: implement full reflink support for inline extents")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a check to btrfs_check_chunk_valid() that the METADATA_REMAP and
REMAPPED flags are only set if the REMAP_TREE incompat flag is also set.
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add write-time checking of items in the remap tree, to catch errors
before they are written to disk.
We're checking:
* That remap items, remap backrefs, and identity remaps aren't written
unless the REMAP_TREE incompat flag is set
* That identity remaps have a size of 0
* That remap items and remap backrefs have a size of sizeof(struct
btrfs_remap_item)
* That the objectid for these items is aligned to the sector size
* That the offset for these items (i.e. the size of the remapping) isn't
0 and is aligned to the sector size
* That objectid + offset doesn't overflow
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_setsize(), when a file is truncated to size 0, the
BTRFS_INODE_FLUSH_ON_CLOSE flag is unconditionally set to ensure
pending writes get flushed on close. This flag was designed to protect
the "truncate-then-rewrite" pattern, where an application truncates a
file with existing data down to zero and writes new content, ensuring
the new data reach disk on close.
However, when a file already has a size of 0 (e.g. a newly created
file opened with O_CREAT | O_TRUNC), oldsize and newsize are both 0.
In this case, setting BTRFS_INODE_FLUSH_ON_CLOSE is unnecessary because
no "good data" was truncated away. The subsequent filemap_flush() in
btrfs_release_file() then triggers avoidable writeback that disrupts
the normal delayed writeback batching, adding I/O overhead.
This comes from a real workload. A backup service creates temporary
files via mkstemp(), closes them, and later reopens them with O_TRUNC
for writing. The O_TRUNC is defensive. The file creation and usage is
done by a different component, so removing the unneeded truncation is
not straightforward. This pattern repeats for a large number of files
each close() triggers an unnecessary filemap_flush().
Signed-off-by: Dave Chen <davechen@synology.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two new callbacks have been introduced in v6.19, and it has been
two releases in v7.1.
During that time we have not yet exposed bugs related that two features,
thus it's time to expose them for end users.
It's especially important to expose remove_bdev callback to end users.
That new callback makes btrfs automatically shutdown or go degraded
when a device is missing (depending on if the fs can maintain RW), which
is affecting end users.
We want some feedback from early adopters.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace.
Fix by copying only total_spaces entries (the actually-filled count from
the second pass) instead of alloc_size bytes, and switch to kzalloc so
any future copy size mismatch cannot leak heap data.
Fixes: 7fde62bffb ("Btrfs: buffer results in the space_info ioctl")
CC: stable@vger.kernel.org # 3.0
Signed-off-by: Yochai Eisenrich <echelonh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_run_dev_stats() is called during the critical section of a
transaction commit and it takes the device_list_mutex, which is also
acquired by fitrim, which does discard operations while holding that
mutex. Most of the time, if we are on a healthy filesystem, we don't have
new stat updates to persist in the device tree, so blocking on the
device_list_mutex is just wasting time and making any tasks that need to
start a new transaction wait longer that necessary.
Since the device list is RCU safe/protected, make btrfs_run_dev_stats()
do an initial check for device stat updates using RCU and quit without
taking the device_list_mutex in case there are no new device stats that
need to be persisted in the device tree.
Also note that adding/removing devices also requires starting a
transaction, and since btrfs_run_dev_stats() is called from the critical
section of a transaction commit, no one can be concurrently adding or
removing a device while btrfs_run_dev_stats() is called.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When qgroups are enabled, __btrfs_qgroup_release_data() and
qgroup_free_reserved_data() pass an extent_changeset to
btrfs_clear_record_extent_bits() to track how many bytes had their
EXTENT_QGROUP_RESERVED bits cleared. Inside the extent IO tree spinlock,
add_extent_changeset() calls ulist_add() with GFP_ATOMIC to record each
changed range. If this allocation fails, it hits a BUG_ON and panics the
kernel.
However, both of these callers only read changeset.bytes_changed
afterwards — the range_changed ulist is populated and immediately freed
without ever being iterated. The GFP_ATOMIC allocation is entirely
unnecessary for these paths.
Introduce extent_changeset_init_bytes_only() which uses a sentinel value
(EXTENT_CHANGESET_BYTES_ONLY) on the ulist's prealloc field to signal
that only bytes_changed should be tracked. add_extent_changeset() checks
for this sentinel and returns early after updating bytes_changed,
skipping the ulist_add() call entirely. This eliminates the GFP_ATOMIC
allocation and makes the BUG_ON unreachable for these paths.
Callers that need range tracking (qgroup_reserve_data,
qgroup_unreserve_range, btrfs_qgroup_check_reserved_leak) continue to
use extent_changeset_init() and are unaffected.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Decrease the indentation of find_free_extent_update_loop(), by inverting
the check if the loop state is smaller than LOOP_NO_EMPTY_SIZE.
This also allows for an early return from find_free_extent_update_loop(),
in case LOOP_NO_EMPTY_SIZE is already set at this point.
While at it change a
if () {
}
else if
else
pattern to all using curly braces and be consistent with the rest of btrfs
code.
Also change 'int exists' to 'bool have_trans' giving it a more meaningful
name and type.
No functional changes intended.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one caller outside qgroup.c of btrfs_qgroup_reserve_meta()
and we have btrfs_qgroup_reserve_meta_prealloc() is a wrapper around
that function. Make that caller use btrfs_qgroup_reserve_meta_prealloc()
and unexport btrfs_qgroup_reserve_meta(), simplifying the external API.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since __btrfs_qgroup_reserve_meta() is only called by
btrfs_qgroup_reserve_meta_prealloc(), which is a simple inline wrapper,
get rid of the later and rename __btrfs_qgroup_reserve_meta() to the
later.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since __btrfs_qgroup_free_meta() is only called by
btrfs_qgroup_free_meta_prealloc(), which is a simple inline wrapper, get
rid of the later and rename __btrfs_qgroup_free_meta() to the later.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
They have no more users since commit a649684967 ("btrfs: fix start
transaction qgroup rsv double free"), so remove them.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
