When FRED is enabled, its initialization message is printed for every CPU
during boot as well as during suspend-resume. This debug message can be noisy
and it isn't very useful unless someone is debugging FRED itself.
As FRED is enabled by default, remove the log message as mentioned in
the code comment.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260325230151.1898287-4-hpa@zytor.com
MPAM (Memory Partitioning and Monitoring) is now exposed to user-space via
resctrl. Add some documentation so the user knows what features to expect.
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Signed-off-by: James Morse <james.morse@arm.com>
CMN-650 is afflicted with an erratum where the CSU NRDY bit never clears.
This tells us the monitor never finishes scanning the cache. The erratum
document says to wait the maximum time, then ignore the field.
Add a flag to indicate whether this is the final attempt to read the
counter, and when this quirk is applied, ignore the NRDY field.
This means accesses to this counter will always retry, even if the counter
was previously programmed to the same values.
The counter value is not expected to be stable, it drifts up and down with
each allocation and eviction. The CSU register provides the value for a
point in time.
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The registers MSMON_MBWU_L and MSMON_MBWU return the number of requests
rather than the number of bytes transferred.
Bandwidth resource monitoring is performed at the last level cache, where
each request arrive in 64Byte granularity. The current implementation
returns the number of transactions received at the last level cache but
does not provide the value in bytes. Scaling by 64 gives an accurate byte
count to match the MPAM specification for the MSMON_MBWU and MSMON_MBWU_L
registers. This patch fixes the issue by reporting the actual number of
bytes instead of the number of transactions from __ris_msmon_read().
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
In the T241 implementation of memory-bandwidth partitioning, in the absence
of contention for bandwidth, the minimum bandwidth setting can affect the
amount of achieved bandwidth. Specifically, the achieved bandwidth in the
absence of contention can settle to any value between the values of
MPAMCFG_MBW_MIN and MPAMCFG_MBW_MAX. Also, if MPAMCFG_MBW_MIN is set
zero (below 0.78125%), once a core enters a throttled state, it will never
leave that state.
The first issue is not a concern if the MPAM software allows to program
MPAMCFG_MBW_MIN through the sysfs interface. This patch ensures program
MBW_MIN=1 (0.78125%) whenever MPAMCFG_MBW_MIN=0 is programmed.
In the scenario where the resctrl doesn't support the MBW_MIN interface via
sysfs, to achieve bandwidth closer to MBW_MAX in the absence of contention,
software should configure a relatively narrow gap between MBW_MIN and
MBW_MAX. The recommendation is to use a 5% gap to mitigate the problem.
Clear the feature MBW_MIN feature from the class to ensure we don't
accidentally change behaviour when resctrl adds support for a MBW_MIN
interface.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAM bandwidth partitioning controls will not be correctly configured,
and hardware will retain default configuration register values, meaning
generally that bandwidth will remain unprovisioned.
To address the issue, follow the below steps after updating the MBW_MIN
and/or MBW_MAX registers.
- Perform 64b reads from all 12 bridge MPAM shadow registers at offsets
(0x360048 + slice*0x10000 + partid*8). These registers are read-only.
- Continue iterating until all 12 shadow register values match in a loop.
pr_warn_once if the values fail to match within the loop count 1000.
- Perform 64b writes with the value 0x0 to the two spare registers at
offsets 0x1b0000 and 0x1c0000.
In the hardware, writes to the MPAMCFG_MBW_MAX MPAMCFG_MBW_MIN registers
are transformed into broadcast writes to the 12 shadow registers. The
final two writes to the spare registers cause a final rank of downstream
micro-architectural MPAM registers to be updated from the shadow copies.
The intervening loop to read the 12 shadow registers helps avoid a race
condition where writes to the spare registers occur before all shadow
registers have been updated.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAM specification includes the MPAMF_IIDR, which serves to uniquely
identify the MSC implementation through a combination of implementer
details, product ID, variant, and revision. Certain hardware issues/errata
can be resolved using software workarounds.
Introduce a quirk framework to allow workarounds to be enabled based on the
MPAMF_IIDR value.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Co-developed-by: James Morse <james.morse@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Enough MPAM support is present to enable ARCH_HAS_CPU_RESCTRL. Let it
rip^Wlink!
ARCH_HAS_CPU_RESCTRL indicates resctrl can be enabled. It is enabled by the
arch code simply because it has 'arch' in its name.
This removes ARM_CPU_RESCTRL as a mimic of X86_CPU_RESCTRL. While here,
move the ACPI dependency to the driver's Kconfig file.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
A few resctrl features and hooks need to be provided, but aren't needed or
supported on MPAM platforms.
resctrl has individual hooks to separately enable and disable the
closid/partid and rmid/pmg context switching code. For MPAM this is all the
same thing, as the value in struct task_struct is used to cache the value
that should be written to hardware. arm64's context switching code is
enabled once MPAM is usable, but doesn't touch the hardware unless the
value has changed.
For now event configuration is not supported, and can be turned off by
returning 'false' from resctrl_arch_is_evt_configurable().
The new io_alloc feature is not supported either, always return false from
the enable helper to indicate and fail the enable.
Add this, and empty definitions for the other hooks.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
resctrl's limbo code needs to be told when the data left in a cache is
small enough for the partid+pmg value to be re-allocated.
x86 uses the cache size divided by the number of rmid users the cache may
have. Do the same, but for the smallest cache, and with the number of
partid-and-pmg users.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
resctrl uses resctrl_arch_rmid_read() to read counters. CDP emulation means
the counter may need reading in three different ways.
The helpers behind the resctrl_arch_ functions will be re-used for the ABMC
equivalent functions.
Add the rounding helper for checking monitor values while we're here.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
When resctrl wants to read a domain's 'QOS_L3_OCCUP', it needs to allocate
a monitor on the corresponding resource. Monitors are allocated by class
instead of component.
Add helpers to allocate a CSU monitor. These helper return an out of range
value for MBM counters.
Allocating a montitor context is expected to block until hardware resources
become available. This only makes sense for QOS_L3_OCCUP as unallocated MBM
counters are losing data.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
resctrl exposes a counter via a file named llc_occupancy. This isn't really
a counter as its value goes up and down, this is a snapshot of the cache
storage usage monitor.
Add some picking code which will only find an L3. The resctrl counter
file is called llc_occupancy but we don't check it is the last one as
it is already identified as L3.
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Dave Martin <dave.martin@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Add the boilerplate that tells resctrl about the mpam monitors that are
available. resctrl expects all (non-telemetry) monitors to be on the L3 and
so advertise them there and invent an L3 resctrl resource if required. The
L3 cache itself has to exist as the cache ids are used as the domain
ids.
Bring the resctrl monitor domains online and offline based on the cpus
they contain.
Support for specific monitor types is left to later.
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Signed-off-by: James Morse <james.morse@arm.com>
resctrl specifies the format of the control schemes, and these don't match
the hardware.
Some of the conversions are a bit hairy - add some kunit tests.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[morse: squashed enough of Dave's fixes in here that it's his patch now!]
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
resctrl supports 'MB', as a percentage throttling of traffic from the
L3. This is the control that mba_sc uses, so ideally the class chosen
should be as close as possible to the counters used for mbm_total. If there
is a single L3, it's the last cache, and the topology of the memory matches
then the traffic at the memory controller will be equivalent to that at
egress of the L3. If these conditions are met allow the memory class to
back MB.
MB's percentage control should be backed either with the fixed point
fraction MBW_MAX or bandwidth portion bitmaps. The bandwidth portion
bitmaps is not used as its tricky to pick which bits to use to avoid
contention, and may be possible to expose this as something other than a
percentage in the future.
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
ENOTSUPP is not a SUSV4 error code and checkpatch will warn about it.
It is also not very descriptive in the context of BPMP, so use the
ENODEV error code instead. For the stub implementations this is a more
accurate description of what the failure is.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to calculate the rmid realloc threshold the size of the cache
needs to be known. Cache domains will also be named after the cache id. So
that this information can be extracted from cacheinfo we need to wait for
it to be ready. The cacheinfo information is populated in device_initcall()
so we wait for that.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Because MPAM's pmg aren't identical to RDT's rmid, resctrl handles some
data structures by index. This allows x86 to map indexes to RMID, and MPAM
to map them to partid-and-pmg.
Add the helpers to do this.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
MPAM uses a fixed-point formats for some hardware controls. Resctrl
provides the bandwidth controls as a percentage. Add helpers to convert
between these.
Ensure bwa_wd is at most 16 to make it clear higher values have no meaning.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
When CDP is not enabled, the 'rmid_entry's in the limbo list,
rmid_busy_llc, map directly to a (PARTID,PMG) pair and when CDP is enabled
the mapping is to two different pairs. As the limbo list is reused between
mounts and CDP disabled on unmount this can lead to stale mapping and the
limbo handler will then make monitor reads with potentially out of range
PARTID. This may then cause an MPAM error interrupt and the driver will
disable MPAM.
No problems are expected if you just mount the resctrl file system
once with CDP enabled and never unmount it. Hide CDP emulation behind
CONFIG_EXPERT to protect the unwary.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Signed-off-by: James Morse <james.morse@arm.com>
Intel RDT's CDP feature allows the cache to use a different control value
depending on whether the accesses was for instruction fetch or a data
access. MPAM's equivalent feature is the other way up: the CPU assigns a
different partid label to traffic depending on whether it was instruction
fetch or a data access, which causes the cache to use a different control
value based solely on the partid.
MPAM can emulate CDP, with the side effect that the alternative partid is
seen by all MSC, it can't be enabled per-MSC.
Add the resctrl hooks to turn this on or off. Add the helpers that match a
closid against a task, which need to be aware that the value written to
hardware is not the same as the one resctrl is using.
Update the 'arm64_mpam_global_default' variable the arch code uses during
context switch to know when the per-cpu value should be used instead. Also,
update these per-cpu values and sync the resulting mpam partid/pmg
configuration to hardware.
resctrl can enable CDP for L2 caches, L3 caches or both. When it is enabled
by one and not the other MPAM globally enabled CDP but hides the effect
on the other cache resource. This hiding is possible as CPOR is the only
supported cache control and that uses a resource bitmap; two partids with
the same bitmap act as one.
Awkwardly, the MB controls don't implement CDP and CDP can't be hidden as
the memory bandwidth control is a maximum per partid which can't be
modelled with more partids. If the total maximum is used for both the data
and instruction partids then then the maximum may be exceeded and if it is
split in two then the one using more bandwidth will hit a lower
limit. Hence, hide the MB controls completely if CDP is enabled for any
resource.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Amit Singh Tomar <amitsinght@marvell.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
arm64 provides helpers for changing a task's and a cpu's mpam partid/pmg
values.
These are used to back a number of resctrl_arch_ functions. Connect them
up.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
resctrl has two helpers for updating the configuration.
resctrl_arch_update_one() updates a single value, and is used by the
software-controller to apply feedback to the bandwidth controls, it has to
be called on one of the CPUs in the resctrl:domain.
resctrl_arch_update_domains() copies multiple staged configurations, it can
be called from anywhere.
Both helpers should update any changes to the underlying hardware.
Implement resctrl_arch_update_domains() to use
resctrl_arch_update_one(). Neither need to be called on a specific CPU as
the mpam driver will send IPIs as needed.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Implement resctrl_arch_get_config() by testing the live configuration for a
CPOR bitmap. For any other configuration type return the default.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
We already have a helper for resetting an mpam class and component. Hook
it up to resctrl_arch_reset_all_ctrls() and the domain offline path.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
A total of six PCIe controllers can be found on Tegra264. One of them is
used internally for the integrated GPU while the other five can go to a
variety of connectors like full PCIe slots or M.2.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Systems with MPAM support may have a variety of control types at any point
of their system layout. We can only expose certain types of control, and
only if they exist at particular locations.
Start with the well-known caches. These have to be depth 2 or 3 and support
MPAM's cache portion bitmap controls, with a number of portions fewer than
resctrl's limit.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The following warning is observed on the Tegra234 Jetson platforms ...
rtc-nvidia-vrs10 4-003c: /aliases ID 0 not available
This happens because the 'rtc@c2a0000' device is registered before the
vrs10 RTC and so is assigned the 'rtc0' alias. We want the vrs10 RTC to
be the default RTC because this RTC maintains time across power cycles.
Fix this by adding a 'rtc1' alias for the 'rtc@c2a0000' device.
Fixes: b1806f2b4e ("arm64: tegra: Add device-tree node for NVVRS RTC")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT bindings don't allow the clock and reset names to be specified
since there is only a single entry for each.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The snps,blen property of stmmac-axi-config nodes needs to have 7
entries in total, with unsupported burst lengths listed as 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
resctrl has its own data structures to describe its resources. We can't use
these directly as we play tricks with the 'MBA' resource, picking the MPAM
controls or monitors that best apply. We may export the same component as
both L3 and MBA.
Add mpam_resctrl_res[] as the array of class->resctrl mappings we are
exporting, and add the cpuhp hooks that allocated and free the resctrl
domain structures. Only the mpam control feature are considered here and
monitor support will be added later.
While we're here, plumb in a few other obvious things.
CONFIG_ARM_CPU_RESCTRL is used to allow this code to be built even though
it can't yet be linked against resctrl.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
While we trap the guest's attempts to read/write the MPAM control
registers, the hardware continues to use them. Guest-EL0 uses KVM's
user-space's configuration, as the value is left in the register, and
guest-EL1 uses either the host kernel's configuration, or in the case of
VHE, the UNKNOWN reset value of MPAM1_EL1.
We want to force the guest-EL1 to use KVM's user-space's MPAM
configuration. On nVHE rely on MPAM0_EL1 and MPAM1_EL1 always being
programmed the same and on VHE copy MPAM0_EL1 into the guest's
MPAM1_EL1. There is no need to restore as this is out of context once TGE
is set.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Care must be taken when modifying the PARTID and PMG of a task in any
per-task structure as writing these values may race with the task being
scheduled in, and reading the modified values.
Add helpers to set the task properties, and the CPU default value. These
use WRITE_ONCE() that pairs with the READ_ONCE() in mpam_get_regval() to
avoid causing torn values.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAMSM_EL1 sets the MPAM labels, PMG and PARTID, for loads and stores
generated by a shared SMCU. Disable the traps so the kernel can use it and
set it to the same configuration as the per-EL cpu MPAM configuration.
If an SMCU is not shared with other cpus then it is implementation
defined whether the configuration from MPAMSM_EL1 is used or that from
the appropriate MPAMy_ELx. As we set the same, PMG_D and PARTID_D,
configuration for MPAM0_EL1, MPAM1_EL1 and MPAMSM_EL1 the resulting
configuration is the same regardless.
The range of valid configurations for the PARTID and PMG in MPAMSM_EL1 is
not currently specified in Arm Architectural Reference Manual but the
architect has confirmed that it is intended to be the same as that for the
cpu configuration in the MPAMy_ELx registers.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAM system registers will be lost if the CPU is reset during PSCI's
CPU_SUSPEND.
Add a PM notifier to restore them.
mpam_thread_switch(current) can't be used as this won't make any changes if
the in-memory copy says the register already has the correct value. In
reality the system register is UNKNOWN out of reset.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Requesters need to populate the MPAM fields for any traffic they send on
the interconnect. For the CPUs these values are taken from the
corresponding MPAMy_ELx register. Each requester may have a limit on the
largest PARTID or PMG value that can be used. The MPAM driver has to
determine the system-wide minimum supported PARTID and PMG values.
To do this, the driver needs to be told what each requestor's limit is.
CPUs are special, but this infrastructure is also needed for the SMMU and
GIC ITS. Call the helper to tell the MPAM driver what the CPUs can do.
The return value can be ignored by the arch code as it runs well before the
MPAM driver starts probing.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: requestor->requester as argued by ispell ]
Signed-off-by: James Morse <james.morse@arm.com>
In anticipation of MPAM being useful remove the CONFIG_EXPERT restriction.
This was done to prevent the driver being enabled before the user-space
interface was wired up.
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: Added second paragraph ]
Signed-off-by: James Morse <james.morse@arm.com>
Now that the MPAM system registers are expected to have values that change,
reprogram them based on the previous value when a CPU is brought online.
Previously MPAM's 'default PARTID' of 0 was always used for MPAM in
kernel-space as this is the PARTID that hardware guarantees to
reset. Because there are a limited number of PARTID, this value is exposed
to user-space, meaning resctrl changes to the resctrl default group would
also affect kernel threads. Instead, use the task's PARTID value for
kernel work on behalf of user-space too. The default of 0 is kept for both
user-space and kernel-space when MPAM is not enabled.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
MPAM allows traffic in the SoC to be labeled by the OS, these labels are
used to apply policy in caches and bandwidth regulators, and to monitor
traffic in the SoC. The label is made up of a PARTID and PMG value. The x86
equivalent calls these CLOSID and RMID, but they don't map precisely.
MPAM has two CPU system registers that is used to hold the PARTID and PMG
values that traffic generated at each exception level will use. These can
be set per-task by the resctrl file system. (resctrl is the defacto
interface for controlling this stuff).
Add a helper to switch this.
struct task_struct's separate CLOSID and RMID fields are insufficient to
implement resctrl using MPAM, as resctrl can change the PARTID (CLOSID) and
PMG (sort of like the RMID) separately. On x86, the rmid is an independent
number, so a race that writes a mismatched closid and rmid into hardware is
benign. On arm64, the pmg bits extend the partid.
(i.e. partid-5 has a pmg-0 that is not the same as partid-6's pmg-0). In
this case, mismatching the values will 'dirty' a pmg value that resctrl
believes is clean, and is not tracking with its 'limbo' code.
To avoid this, the partid and pmg are always read and written as a
pair. This requires a new u64 field. In struct task_struct there are two
u32, rmid and closid for the x86 case, but as we can't use them here do
something else. Add this new field, mpam_partid_pmg, to struct thread_info
to avoid adding more architecture specific code to struct task_struct.
Always use READ_ONCE()/WRITE_ONCE() when accessing this field.
Resctrl allows a per-cpu 'default' value to be set, this overrides the
values when scheduling a task in the default control-group, which has
PARTID 0. The way 'code data prioritisation' gets emulated means the
register value for the default group needs to be a variable.
The current system register value is kept in a per-cpu variable to avoid
writing to the system register if the value isn't going to change. Writes
to this register may reset the hardware state for regulating bandwidth.
Finally, there is no reason to context switch these registers unless there
is a driver changing the values in struct task_struct. Hide the whole thing
behind a static key. This also allows the driver to disable MPAM in
response to errors reported by hardware. Move the existing static key to
belong to the arch code, as in the future the MPAM driver may become a
loadable module.
All this should depend on whether there is an MPAM driver, hide it behind
CONFIG_ARM64_MPAM.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
CC: Amit Singh Tomar <amitsinght@marvell.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAMSM_EL1 register controls the MPAM labeling for an SMCU, Streaming
Mode Compute Unit. As there is no MPAM support in KVM, make sure MPAMSM_EL1
accesses trigger an UNDEF.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
When KVM enables or disables MPAM traps to EL2 it clears all other bits in
MPAM2_EL2. Notably, it clears the partition ids (PARTIDs) and performance
monitoring groups (PMGs). Avoid changing these bits in anticipation of
adding support for MPAM in the kernel. Otherwise, on a VHE system with the
host running at EL2 where MPAM2_EL2 and MPAM1_EL1 access the same register,
any attempt to use MPAM to monitor or partition resources for kernel space
would be foiled by running a KVM guest. Additionally, MPAM2_EL2.EnMPAMSM is
always set to 0 which causes MPAMSM_EL1 to always trap. Keep EnMPAMSM set
to 1 when not in a guest so that the kernel can use MPAMSM_EL1.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
