When the ideal total divider (sysclk/bclk) is between 33 and 4096 and
AUXCLK is enabled, the driver computes aux_div as ceil(div/32) and then
recomputes bclk_div from the truncated sysclk.
This two-step integer division loses precision due to truncation and can
sometimes produce PPM errors large enough for ALSA's hw_rule_format to
reject otherwise valid sample formats.
For example, on AM62D-EVM (auxclk-fs-ratio=2177, tdm-slots=2, fck=96 MHz),
playing S16_LE at 44100 Hz gives BCLK = 1,411,200 Hz and an ideal total
divider of 68. The old code picks aux_div = ceil(68/32) = 3,
then bclk_div = (96005700/3) / 1411200 = 22, for a total of 3 x 22 =
66 -- two steps from ideal. The resulting error exceeds the PPM threshold
and causes S16_LE, S24_LE to be rejected.
Therefore when the total divider fits in the AHCLKXDIV register alone
(<=4096), use it directly as aux_div with bclk_div=1, and compare floor
and ceil to pick the closer match, to ensure the best ideal total dividers.
Dividers at or below 32 never enter this path, and dividers above 4096
still fall through to the existing DIV_ROUND_UP path, so previously
working configurations remains unaffected.
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260305195825.9998-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the AUXCLK-enabled check out of davinci_mcasp_calc_clk_div() into
a reusable helper. No functional change.
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260305195825.9998-2-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use vmalloc() instead of kmalloc(..., GFP_DMA) to alloc the temporary
buffer for firmware download blobs. This avoids the problem that a
heavily fragmented system cannot allocate enough physically-contiguous
memory for a large blob.
The redundant alloc buffer mechanism was removed in commit 900baa6e7b
("firmware: cs_dsp: Remove redundant download buffer allocator").
While doing that I was overly focused on the possibility of the
underlying bus requiring DMA-safe memory. So I used GFP_DMA kmalloc()s.
I failed to notice that the code I was removing used vmalloc().
This creates a regression.
Way back in 2014 the problem of fragmentation with kmalloc()s was fixed
by commit cdcd7f7287 ("ASoC: wm_adsp: Use vmalloc to allocate firmware
download buffer").
Although we don't need physically-contiguous memory, we don't know if the
bus needs some particular alignment of the buffers. Since the change in
2014, the firmware download has always used whatever alignment vmalloc()
returns. To avoid introducing a new problem, the temporary buffer is still
used, to keep the same alignment of pointers passed to regmap_raw_write().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 900baa6e7b ("firmware: cs_dsp: Remove redundant download buffer allocator")
Link: https://patch.msgid.link/20260304141250.1578597-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gud_plane_atomic_update() currently handles both crtc state and
framebuffer updates - the complexity has led to a few accidental
NULL pointer dereferences.
Commit dc2d5ddb19 ("drm/gud: fix NULL fb and crtc dereferences
on USB disconnect") [1] fixed an earlier dereference but planes
can also be disabled in non-hotplug paths (e.g. display disables
via the desktop environment). The drm_dev_enter() call would not
cause an early return in those and subsequently oops on
dereferencing crtc:
BUG: kernel NULL pointer dereference, address: 00000000000005c8
CPU: 6 UID: 1000 PID: 3473 Comm: kwin_wayland Not tainted 6.18.2-200.vanilla.gud.fc42.x86_64 #1 PREEMPT(lazy)
RIP: 0010:gud_plane_atomic_update+0x148/0x470 [gud]
<TASK>
drm_atomic_helper_commit_planes+0x28e/0x310
drm_atomic_helper_commit_tail+0x2a/0x70
commit_tail+0xf1/0x150
drm_atomic_helper_commit+0x13c/0x180
drm_atomic_commit+0xb1/0xe0
info ? __pfx___drm_printfn_info+0x10/0x10
drm_mode_atomic_ioctl+0x70f/0x7c0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
drm_ioctl_kernel+0xae/0x100
drm_ioctl+0x2a8/0x550
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
__x64_sys_ioctl+0x97/0xe0
do_syscall_64+0x7e/0x7f0
? __ct_user_enter+0x56/0xd0
? do_syscall_64+0x158/0x7f0
? __ct_user_enter+0x56/0xd0
? do_syscall_64+0x158/0x7f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Split out crtc handling from gud_plane_atomic_update() into
atomic_enable() and atomic_disable() functions to delegate
crtc state transitioning work to the DRM helpers.
To preserve the gud state commit sequence [2], switch to
the runtime PM version of drm_atomic_helper_commit_tail() which
ensures that crtcs are enabled (hence sending the
GUD_REQ_SET_CONTROLLER_ENABLE and GUD_REQ_SET_DISPLAY_ENABLE
requests) before a framebuffer update is sent.
[1] https://lore.kernel.org/all/20251231055039.44266-1-me@shenghaoyang.info/
[2] https://github.com/notro/gud/wiki/GUD-Protocol#display-state
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601142159.0v8ilfVs-lkp@intel.com/
Fixes: 73cfd166e0 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Cc: <stable@vger.kernel.org> # 6.19.x
Cc: <stable@vger.kernel.org> # 6.18.x
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20260222054551.80864-1-me@shenghaoyang.info
Cross-subsystem Changes:
dma-buf:
- Prepare for compile-time concurrency analysis
Core Changes:
buddy:
- Improve assert testing
sched:
- Fix race condition in drm_sched_fini()
- Mark slow tests
Driver Changes:
bridge:
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings
gma500:
- Use DRM client buffer for fbdev framebuffer
gud:
- Test for imported buffers with helper
imagination:
- Fix power domain handling
ivpu:
- Update boot API to v3.29.4
- Limit per-user number of doorbells and contexts
nouveau:
- Test for imported buffers with helper
panel:
- panel-edp: Fix timings for BOE NV140WUM-N64
panfrost:
- Test for imported buffers with helper
panthor:
- Test for imported buffers with helper
vc4:
- Test for imported buffers with helper
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmmpOo4bFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3oj7ZkIAIgJzirL4ZoSEojD2MRd
OC0I7PZBLEVT5JvQ1IEt//FaD0bIBjwvyd0LTuRLK+Q6/trY+cOBuLJ2YRaTdZOY
FrfNU9kifJueJzeVpeJWS0nMZi4DvhR/3AEgKkJ1fRJT14qkPr1Rl1lJdocwygIx
N/qV6P8JujOVC61aGB/KIwrgzSuOkOUu6KRqEu2daB83kc8x+Mwy1Yy04h4Fd43W
d/NN327LE9pV2MD8ASlok00kAwqalkcraevIS9LgFkLY9s4xaICNcBn8eJl+VmXz
OmSfrko5hXgUX0ijvyI2jaxx9F1zbrtmv0sj4g5OhVIZcy2ATaASusmxRrHYJR/8
JZ8=
=1puI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-03-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
Cross-subsystem Changes:
dma-buf:
- Prepare for compile-time concurrency analysis
Core Changes:
buddy:
- Improve assert testing
sched:
- Fix race condition in drm_sched_fini()
- Mark slow tests
Driver Changes:
bridge:
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings
gma500:
- Use DRM client buffer for fbdev framebuffer
gud:
- Test for imported buffers with helper
imagination:
- Fix power domain handling
ivpu:
- Update boot API to v3.29.4
- Limit per-user number of doorbells and contexts
nouveau:
- Test for imported buffers with helper
panel:
- panel-edp: Fix timings for BOE NV140WUM-N64
panfrost:
- Test for imported buffers with helper
panthor:
- Test for imported buffers with helper
vc4:
- Test for imported buffers with helper
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260305081140.GA171266@linux.fritz.box
amdgpu:
- FAMS2 updates
- Refactor DC I2C
- Rework ttm handling to allow for multiple engines
- UserQ updates
- Ring reset improvements
- DC DCE 6.x cleanups
- DC support for NUTMEG and TRAVIS DP bridges
- Enable DC by default on CIK APUs
- Add DCN 4.2 support
- IPS fixes
- Overlay fixes for DCN4
- SDMA Limit updates
- Misc fixes
- RAS updates
- Register access callback rework
- GC 12.1 updates
amdkfd:
- Misc cleanups
UAPI:
- UserQ fence IOCTL parameter size fixes. The change is backwards compatible on LE, but not BE.
UserQs are still not considered stable and are disabled by default.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCaaikJwAKCRC93/aFa7yZ
2CklAQDWTLGzAuei2qob6wV4dcbxi+8eIB7uy4wzppMYen7WkgEA9oChRFo8eOAo
SAlAx59UnuGYDEdQTlQUfP/1BSLZ6AM=
=Cvp8
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-7.1-2026-03-04' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-04:
amdgpu:
- FAMS2 updates
- Refactor DC I2C
- Rework ttm handling to allow for multiple engines
- UserQ updates
- Ring reset improvements
- DC DCE 6.x cleanups
- DC support for NUTMEG and TRAVIS DP bridges
- Enable DC by default on CIK APUs
- Add DCN 4.2 support
- IPS fixes
- Overlay fixes for DCN4
- SDMA Limit updates
- Misc fixes
- RAS updates
- Register access callback rework
- GC 12.1 updates
amdkfd:
- Misc cleanups
UAPI:
- UserQ fence IOCTL parameter size fixes. The change is backwards compatible on LE, but not BE.
UserQs are still not considered stable and are disabled by default.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260304213233.1938311-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix for the x86 EFI workaround keeping boot services code and data
regions reserved until after SetVirtualAddressMap() completes: deferred
struct page initialization may result in some of this memory to be lost
permanently.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaaxHtgAKCRAwbglWLn0t
XIbNAPwNjw/TSgVD+Ur//yqY7TxZSBari8aheEkXNaYHFCPImwD6A1CzNGn6rcka
JzeP+6HeOO9c0xCBudcR0aRfSma3cQI=
=a+XF
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Fix for the x86 EFI workaround keeping boot services code and data
regions reserved until after SetVirtualAddressMap() completes:
deferred struct page initialization may result in some of this memory
being lost permanently"
* tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efi: defer freeing of boot services memory
Remove the trailing semicolon from the inline assembly statement in
local_add_return().
The _ASM_XADD macro already expands to a complete instruction, making
the extra semicolon unnecessary. More importantly, the stray semicolon
causes GCC to treat the inline asm as containing multiple instructions,
which can skew its internal instruction count estimation and affect
optimization heuristics.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260308171250.7278-1-ubizjak@gmail.com
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context.
Fixes: 68fb9f3e31 ("RDMA/efa: Remove redundant NULL pointer check of CQE")
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260308165350.18219-1-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A revert for the i801 driver restoring old locking behaviour.
-----BEGIN PGP SIGNATURE-----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=Nc8b
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A revert for the i801 driver restoring old locking behaviour"
* tag 'i2c-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock"
The UDC node does not define any child nodes, so the "#address-cells" and
"#size-cells" properties are unnecessary. Remove these unused properties
to simplify the devicetree node and keep it consistent with DT conventions.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Link: https://lore.kernel.org/r/20260307-atmel-usb-v3-1-3dc48fe772be@gmail.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
[claudiu.beznea: s/at91/microchip in commit title]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Replace the open-coded size rounding logic with the kernel's
round_up() helper to improve readability and align with common
kernel practices.
The original expression:
(1 + (loop_num_ret - 1) / sizeof(u32)) * sizeof(u32)
is equivalent to rounding up loop_num_ret to the nearest multiple of
sizeof(u32), which is exactly what round_up() does.
No functional change.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20260228-scmi-check-v1-1-4935b58bb2db@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Implement new property arm,no-completion-irq, which sets all SCMI
operation into poll mode. This is meant to work around uncooperative
SCP implementations, which do not generate completion interrupts.
This applies to mbox/shmem based implementations.
With this property set, such implementations which do not generate
interrupts can be interacted with, until they are fixed to generate
interrupts properly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20260117010241.186685-2-marek.vasut+renesas@mailbox.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Document new property arm,no-completion-irq . This optional property
is intended for hardware that does not generate completion interrupts
and can be used to unconditionally enable forced polling mode of
operation.
With this property set, such implementations which do not generate
interrupts can be interacted with, until they are fixed to generate
interrupts properly.
Note that, because the original base protocol exchange also requires
some sort of completion mechanism, it is not possible to query SCMI
itself for this property and it must be described in DT. While this
does look a bit like policy, the SCMI provider is part of the
hardware, hence DT.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20260117010241.186685-1-marek.vasut+renesas@mailbox.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Use the new API to support importing pinned dmabufs from exporters
that require revocation, such as VFIO. The revoke semantic is
achieved by issuing a HW invalidation command but not freeing
the key. This prevents further accesses to the region (they will
result in an invalid key AE), but also keeps the key reserved
until the region is actually deregistered (i.e., ibv_dereg_mr)
so that a new MR registration cannot acquire the same key.
Tested with lockdep+kasan and a memfd backed dmabuf.
The rereg_mr path is explicitly blocked in libibverbs for dmabuf MRs
(more specifically, any MR not of type IBV_MR_TYPE_MR), so the rereg_mr
path for dmabufs was tested with a modified libibverbs.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-6-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Added helpers to acquire and release the umem dmabuf revoke
lock. The intent is to avoid the need for drivers to peek
into the ib_umem_dmabuf internals to get the dma_resv_lock
and bring us one step closer to abstracting ib_umem_dmabuf
away from drivers in general.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-5-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Added an interface for importing a pinned but revocable dmabuf.
This interface can be used by drivers that are capable of revocation
so that they can import dmabufs from exporters that may require it,
such as VFIO.
This interface implements a two step process, where drivers will first
call ib_umem_dmabuf_get_pinned_revocable_and_lock() which will pin and
map the dmabuf (and provide a functional move_notify/invalidate_mappings
callback), but will return with the lock still held so that the
driver can then populate the callback via
ib_umem_dmabuf_set_revoke_locked() without races from concurrent
revocations. This scheme also allows for easier integration with drivers
that may not have actually allocated their internal MR objects at the time
of the get_pinned_revocable* call.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-4-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This same logic will eventually be reused from within the
invalidate_mappings callback which already has the dma_resv_lock
held, so break it out into a separate function so it can be reused.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-3-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Move the inner logic of ib_umem_dmabuf_get_pinned_with_dma_device()
to a new static function that returns with the lock held upon success.
The intent is to allow reuse for the future get_pinned_revocable_and_lock
function.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260305170826.3803155-2-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add the digest_size field to the ima_algo_desc structure to determine the
digest size from the correct source.
If the hash algorithm is among allocated PCR banks, take the value from the
TPM bank info (equal to the value from the crypto subsystem if the TPM
algorithm is supported by it; otherwise, not exceding the size of the
digest buffer in the tpm_digest structure, used by IMA).
If the hash algorithm is SHA1, use the predefined value. Lastly, if the
hash algorithm is the default one but not among the PCR banks, take the
digest size from the crypto subsystem (the default hash algorithm is
checked when parsing the ima_hash= command line option).
Finally, use the new information to correctly show the template digest in
ima_measurements_show() and ima_ascii_measurements_show().
Link: https://github.com/linux-integrity/linux/issues/14
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When CONFIG_MODULE_SIG is disabled set_module_sig_enforced() is defined
as an empty stub, so the check is unnecessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When configuration settings are disabled the guarded functions are
defined as empty stubs, so the check is unnecessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
[zohar@linux.ibm.com: fixed merge conflict with commit 63e8a44395a4]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get the i_version")
replaced detecting file change based on i_version with
STATX_CHANGE_COOKIE.
On filesystems without STATX_CHANGE_COOKIE enabled, revert back to
detecting file change based on i_version.
On filesystems which do not support either, assume the file changed.
Reported-by: Frederick Lawler <fred@cloudflare.com>
Fixes: db1d1e8b98 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: stable@vger.kernel.org
Reviewed-by: Frederick Lawler <fred@cloudflare.com>
Tested-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260305154117.326472-1-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This patch supports application allocated memory for CQs.
The application allocates and manages the CQs directly. To support
this, the driver exports a new comp_mask to indicate direct control
of the CQ. When this comp_mask bit is set in the ureq, the driver
maps this application allocated CQ memory into hardware. As the
application manages this memory, the CQ depth ('cqe') passed by it
must be used as is and the driver shouldn't update it.
For CQs, ib_core supports pinning dmabuf based application memory,
specified through provider attributes. This umem is mananged by the
ib_core and is available in ib_cq. Register 'create_cq_user' devop
to process this umem. The driver also supports the legacy interface
that allocates umem internally.
Link: https://patch.msgid.link/r/20260302110036.36387-7-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch refactors kernel and user CQ creation logic into
two separate code paths. This will be used to support dmabuf
based user CQ memory in the next patch. There is no functional
change in this patch.
Link: https://patch.msgid.link/r/20260302110036.36387-6-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some applications may allocate dmabuf based memory for CQs. To support
this, update the existing code to use SZ_4K to specify supported HW
page size for CQs, as we support only 4K pages for now.
Call ib_umem_find_best_pgsz() to ensure umem supports this requested
page size. A helper function includes these changes.
Link: https://patch.msgid.link/r/20260302110036.36387-5-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some applications may need multiple doorbells to support parallel
processing of threads that each operate on a group of resources.
The following uapi methods have been implemented in this patch.
- BNXT_RE_METHOD_DBR_ALLOC:
This will allow the appliation to create extra doorbell regions
and use the associated doorbell page index in CREATE_QP and
use the associated DB address while ringing the doorbell.
- BNXT_RE_METHOD_DBR_FREE:
Free the allocated doorbell region.
- BNXT_RE_METHOD_GET_DEFAULT_DBR:
Return the default doorbell page index and doorbell page address
associated with the ucontext.
Link: https://patch.msgid.link/r/20260302110036.36387-4-sriharsha.basavapatna@broadcom.com
Co-developed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Inside bnxt_qplib_create_qp(), driver currently is doing
a lot of things like allocating HWQ memory for SQ/RQ/ORRQ/IRRQ,
initializing few of qplib_qp fields etc.
Refactored the code such that all memory allocation for HWQs
have been moved to bnxt_re_init_qp_attr() function and inside
bnxt_qplib_create_qp() function just initialize the request
structure and issue the HWRM command to firmware.
Introduced couple of new functions bnxt_re_setup_qp_hwqs() and
bnxt_re_setup_qp_swqs() moved the hwq and swq memory allocation
logic there.
Link: https://patch.msgid.link/r/20260302110036.36387-3-sriharsha.basavapatna@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is in preparation for upcoming patches in the series.
Driver has to support additional UAPIs for some applications.
Moving current UAPI implementation to a new file, uapi.c.
Link: https://patch.msgid.link/r/20260302110036.36387-2-sriharsha.basavapatna@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This flag can be set by drivers once they have finished auditing and
implementing the full udata support on every udata operation.
My intention going forward is that driver authors proposing new udata uAPI
for their drivers must first do the work and set this flag.
If this flag is not set the userspace should not try to use udata based
uAPI newer than this commit, though on a case by case basis it may be OK
based on what checks historical kernels performed on the specific call.
Since bnxt_re is audited now, it is the first driver to set the flag.
Link: https://patch.msgid.link/r/13-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All the calls to ib_copy_to_udata() can use this helper safely.
Link: https://patch.msgid.link/r/11-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Two existing req driver data structures have comp_mask but nothing
checks them for valid contents. Add the missing checks.
Link: https://patch.msgid.link/r/10-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If drivers ever want to go from an empty drvdata to something with them
they need to have called ib_is_udata_in_empty(). Add the missing calls to
all the system calls that don't have req structures.
Link: https://patch.msgid.link/r/9-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Check that the driver data is properly sized and properly zeroed by
calling ib_copy_validate_udata_in().
Use git history to find the commit introducing each req struct and use
that to select the end member.
Link: https://patch.msgid.link/r/8-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Write down how all of this is supposed to work using the new helpers.
Link: https://patch.msgid.link/r/7-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the driver doesn't yet support any request driver data it should check
that it is all zeroed. This is a common pattern, add a helper around
_ib_copy_validate_udata_in() to do this.
Link: https://patch.msgid.link/r/6-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Wrap the common copy_to_user() pattern used in drivers and enhance it
to zero pad as well. Include debug logging on failures.
Link: https://patch.msgid.link/r/5-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For structures with comp_mask also absorb the check of comp_mask valid
bits into the helper. This is slightly tricky because ~ might not fully
extend to 64 bits, the helper inserts an explicit type to ensure that ~
covers all bits.
Link: https://patch.msgid.link/r/4-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new function to consolidate the required compatibility pattern for
driver data of checking against a minimum size, and checking for unknown
trailing bytes to be zero into a function.
This new function uses the faster copy_struct_from_user() instead of
trying to directly check for zero.
Incorporate the common ibdev_dbg() logging directly into the error paths
of the helper.
Link: https://patch.msgid.link/r/3-v3-bd56dd443069+49-bnxt_re_uapi_jgg@nvidia.com
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
