This function will be necessary to determine the upper limit of
rx-page-size.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-15-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If set, take rx_page_size into consideration when calculating
the page shift in Multi Packet WQE mode.
The queue config is saved in the mlx5e_rq_opt_param struct which is
added to the mlx5e_channel_param struct. Now the configuration can be
read from the struct instead of adding it as an argument to all call
sites. For consistency, the queue config is assigned in
mlx5e_build_channel_param().
The queue configuration is read only from queue management ops
as that's the only place where it is currently useful. Furthermore,
netdev_queue_config() expects netdev->queue_mgmt_ops to be
set which is not always the case (representor netdevs).
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-14-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For now allow only PAGE_SIZE. A subsequent patch will add support for
high order pages in zero-copy mode.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-13-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The formula uses the system page size but does not account
for high order pages.
One way to fix this would be to adapt the formula to take
into account the pool order. This would require calculating it
for every allocation or adding an additional rq struct member to
hold the bias max.
However, the above is not really needed as the driver doesn't
check the bias value. It has other means to calculate the expected
number of fragments based on context.
This patch simply sets the value to the max possible value. A sanity
check is added during queue init phase to avoid having really big pages
from using more fragments than the type can fit.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-12-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An upcoming patch will allow setting the page order for RX
pages to be greater than 0. Make sure that the drop page will
also be allocated with the right size when that happens.
Take extra care when calculating the drop page size to
account for page_shift < PAGE_SHIFT which can happen for xsk.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-11-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of unconditionally setting the page_pool to 0, calculate it from
page_shift for MPWQE case.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-10-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adapt the rx path in SHAMPO mode to calculate page size based on
configured page_shift when dealing with payload data.
This is necessary as an upcoming patch will add support for using
different page sizes.
This change has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-9-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The channel parameters from struct mlx5_qmgmt_data are
built in mlx5e_queue_mem_alloc() but are not used.
mlx5e_open_channel() builds the channel parameters internally and those
parameters will be the ones that are used when opening the queue.
This patch drops the unused parameters.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The xsk parameter configuration (struct mlx5e_xsk_param) is passed
around many places during parameter calculation. It is used to contain
channel specific information (as opposed to the global info from
struct mlx5e_params).
Upcoming changes will need to push similar channel specific rq
configuration. Instead of adding one more parameter to all these
functions, create a new container structure that has optional rq
specific parameters. The xsk parameter will be the first of such kind.
The new container struct is itself optional. That means that before
checking its members, it has to be checked itself for validity.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-7-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the allocation and filling of the xsk channel
parameters was done in mlx5e_open_xsk().
Move this responsibility out of mlx5e_open_xsk() and have
the function take an already filled mlx5e_channel_param.
mlx5e_open_channel() already allocates channel parameters.
The only precaution that is needed is to call
mlx5e_build_xsk_channel_param() before mlx5e_open_xsk().
mlx5e_xsk_enable_locked() now allocates and fills the xsk parameters.
For simplicity, link the xsk parameters in struct mlx5e_channel_params
so that channel params can be passed around.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-6-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlx5e_build_xsk_cparam() is meant to be the alternative
to mlx5e_build_channel_param(). It calculates only the parameters
that it requires using the previously configured mlx5e_xsk_param.
Move this function to params.c to be alongside
mlx5e_build_channel_param() and give it a similar name.
Expose the function as it will be needed by upcoming changes.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-5-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Calculating max_xsk_wqebbs seems large enough to deserve its own
function. It will make upcoming changes easier.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Calculating parameters for striding rq is large enough
to deserve its own function. As the names are also very long
it is very easy to hit on the 80 char limitation every time
a change is made. This is an additional sign that it should
be extracted into its own function.
This patch has no functional change.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This structure is used under different names: rq_param, rq_params,
param, rqp. Refactor the code to use a single name: rq_param.
This patch has no functional change.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use per-regulator supply names in pmic "spacemit,p1" node to specify
each board's power tree topology and match the updated dt-binding.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/20260206-spacemit-p1-v4-3-8f695d93811e@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
The backward compatibility code for the previous incarnation of
platform MSI was removed in e989424899 ("genirq/msi: Remove
platform MSI leftovers"), but the comment about that removal is
still present. Remove it.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-7-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Get rid of most of the fsl_mc MSI infrastructure, which is now replaced
by common code.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-6-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Add the tiny bit of infrastructure required to use platform MSI
instead of the current hack. This means providing a write_msi_msg
callback, as well as irq domain and devid retrieval helpers.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-3-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Only the root device generates MSIs (it is the only one talking to
the ITS), so propagating the domain is pretty pointless. Remove it.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-2-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly.
Reported-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20260224-mittlerweile-besessen-2738831ae7f6@brauner
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4d13f4304f ("kthread: Implement preferred affinity")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently, exfat uses truncate_inode_pages() in exfat_evict_inode().
However, truncate_inode_pages() does not mark the mapping as exiting,
so reclaim may still install shadow entries for the mapping until
the inode teardown completes.
In older kernels like Linux 5.10, if shadow entries are present
at that point,clear_inode() can hit
BUG_ON(inode->i_data.nrexceptional);
To align with VFS eviction semantics and prevent this situation,
switch to truncate_inode_pages_final() in ->evict_inode().
Other filesystems were updated to use truncate_inode_pages_final()
in ->evict_inode() by commit 91b0abe36a ("mm + fs: store shadow
entries in page cache")'.
Signed-off-by: Yang Wen <anmuxixixi@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The variable name_len is checked to see if it's larger than the macro
NTFS_MAX_NAME_LEN however this condition is impossible because name_len
is of type u8 and NTFS_MAX_NAME_LEN is hardcoded to be 255.
Detected by Smatch:
fs/ntfs/namei.c:1175 __ntfs_link() warn:
impossible condition '(name_len > 255) => (0-255 > 255)'
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The variable err is confirmed to be 0 and then never reassigned in the
success path. The function then returns with ERR_PTR(err) which just
equals NULL and can be misleading.
Detected by Smatch:
fs/ntfs/namei.c:1091 ntfs_mkdir() warn:
passing zero to 'ERR_PTR'
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Make the top and bottom borders be that same length to
avoid a documentation build error:
Documentation/filesystems/ntfs.rst:159: ERROR: Malformed table.
Bottom border or header rule does not match top border.
(top)
======================= ===================================================
(bottom)
======================= ==================================================
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The variable ctx can be null and once confirmed to be null in its error
path goes to label err_out. Once there it can be immediately dereferenced
by the function ntfs_attr_put_search_ctx() which has no null pointer check.
Detected by Smatch:
fs/ntfs/ea.c:687 ntfs_new_attr_flags() error:
we previously assumed 'ctx' could be null (see line 577)
Add null pointer check before running ntfs_attr_put_search_ctx() in
error path.
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Most symbols for the clock descriptions (arrays) don't have a cmu_
prefix and all symbols have a _clks suffix where appropriate.
Update the few outliers to also fall into this same scheme for
consistency.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260205-clk-gs101-symbol-names-v1-1-a7d9a7a4d108@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used
as a sub-PMIC.
The interface for both is the ACPM firmware protocol, so update the
binding to allow the relevant node and update the example here to
describe the connection for both PMICs.
Since we have two PMICs here, but can not use the 'reg' property (as
the addressing is based on software, i.e. the ACPM firmware), the node
names reflect that with their respective suffix. The existing 'pmic'
therefore becomes deprecated in favour of 'pmic-1'.
While at it, update the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260210-s2mpg1x-regulators-v8-1-c429d709c0e0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
iomap's directio implementation has two magic errno codes that it uses
to signal callers -- ENOTBLK tells the filesystem that it should retry
a write with the pagecache; and EAGAIN tells the caller that pagecache
flushing or invalidation failed and that it should try again.
Neither of these indicate data loss, so let's not report them.
Fixes: a9d573ee88 ("iomap: report file I/O errors to the VFS")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20260224154637.GD2390381@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
PCIe spec r7.0, sec 5.3.3.2.1, recommends proceeding with L2/L3 sequence
even if one or devices do not respond with PME_TO_Ack message after 10ms
timeout.
So just print a warning if the timeout happens and proceed with the system
suspend.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260217113142.9140-1-manivannan.sadhasivam@oss.qualcomm.com
The function __xfrm4_bundle_create() was refactored into
xfrm_bundle_create() (among others) by commit 25ee3286dc
("xfrm: Merge common code into xfrm_bundle_create"). The
responsibility for setting dst->obsolete to DST_OBSOLETE_FORCE_CHK
now lives in xfrm_bundle_create(). Update the comment accordingly.
Signed-off-by: kexinsun <kexinsun@smail.nju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In imx_pcie_probe(), of_parse_phandle() returns the device node pointer
with increased refcount. The pointer reference must be dropped by the
caller when it's no longer needed. However, imx_pcie_probe() doesn't drop
the reference, causing reference leak.
Fix this by using the __free(device_node) cleanup handler to drop the
reference when the function goes out of scope.
Fixes: 1df82ec466 ("PCI: imx: Add workaround for e10728, IMX7d PCIe PLL failure")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260124-pci_imx6-v2-1-acb8d5187683@gmail.com
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jun Seo <jun.seo.93@proton.me>
Link: https://patch.msgid.link/20260226010820.36529-1-jun.seo.93@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The layerscape pcie host controller could also be compiled as module.
Add the necessary infrastructure to allow building as module instead of
only as builtin driver.
Since the driver doesn't expose an irqchip controller, it is also safe to
be removed during runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[mani: added a note about driver removability]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Link: https://patch.msgid.link/20260112-v6-19-topic-layerscape-pcie-v1-1-1cd863fce50e@pengutronix.de
Tariq Toukan says:
====================
mlx5 misc fixes 2026-02-24
This patchset provides misc bug fixes from the team to the mlx5
core and Eth drivers.
====================
Link: https://patch.msgid.link/20260224114652.1787431-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430
Fixes: cee137a634 ("net/mlx5e: Handle ESN update events")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit miss to add locking in the error path of
mlx5_sriov_enable(). When pci_enable_sriov() fails,
mlx5_device_disable_sriov() is called to clean up. This cleanup function
now expects to be called with the devlink instance lock held.
Add the missing devl_lock(devlink) and devl_unlock(devlink)
Fixes: 84a433a40d ("net/mlx5: Lock mlx5 devlink reload callbacks")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit introduced MLX5_PRIV_FLAGS_SWITCH_LEGACY to identify
when a transition to legacy mode is requested via devlink. However, the
logic failed to clear this flag if the mode was subsequently changed
back to MLX5_ESWITCH_OFFLOADS (switchdev). Consequently, if a user
toggled from legacy to switchdev, the flag remained set, leaving the
driver with wrong state indicating
Fix this by explicitly clearing the MLX5_PRIV_FLAGS_SWITCH_LEGACY bit
when the requested mode is MLX5_ESWITCH_OFFLOADS.
Fixes: 2a4f56fbcc ("net/mlx5e: Keep netdev when leave switchdev for devlink set legacy only")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_lag_disable_change() unconditionally called mlx5_disable_lag() when
LAG was active, which is incorrect for MLX5_LAG_MODE_MPESW.
Hnece, call mlx5_disable_mpesw() when running in MPESW mode.
Fixes: a32327a3a0 ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
