Enables access to EFI variables on this machine.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20260214-b4-vivobook-v3-2-3c88065bbf77@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The code:
cnt += in_ie[cnt + 1] + 2; /* get next */
is in both the "if" and "else" branches.
Remove this repetition, which will simplify the code and
improve readability.
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260224164445.18316-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines to adhere to the Linux kernel
coding style. Issues reported by checkpatch.pl.
Signed-off-by: Gabriel Windlin <gawindlin@gmail.com>
Link: https://patch.msgid.link/20260224161319.89187-1-gawindlin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using a prerelease version as a minimum supported version for
CONFIG_WARN_CONTEXT_ANALYSIS was reasonable to do while LLVM 22 was the
development version so that people could immediately build from main and
start testing and validating this in their own code. However, it can be
problematic when using prerelease versions of LLVM 22, such as Android
clang 22.0.1 (the current android mainline compiler) or when bisecting
LLVM between llvmorg-22-init and llvmorg-23-init, to build the kernel,
as all compiler fixes for the context analysis may not be present,
potentially resulting in warnings that can easily turn into errors.
Now that LLVM 22 is released as 22.1.0, upgrade the check to require at
least this version to ensure that a user's toolchain actually has all
the changes needed for a smooth experience with context analysis.
Fixes: 3269701cb2 ("compiler-context-analysis: Add infrastructure for Context Analysis with Clang")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260224-bump-clang-ver-context-analysis-v1-1-16cc7a90a040@kernel.org
The SCHED_DEADLINE scheduler allows reading the statically configured
run-time, deadline, and period parameters through the sched_getattr()
system call. However, there is no immediate way to access, from user space,
the current parameters used within the scheduler: the instantaneous runtime
left in the current cycle, as well as the current absolute deadline.
The `flags' sched_getattr() parameter, so far mandated to contain zero,
now supports the SCHED_GETATTR_FLAG_DL_DYNAMIC=1 flag, to request
retrieval of the leftover runtime and absolute deadline, converted to a
CLOCK_MONOTONIC reference, instead of the statically configured parameters.
This feature is useful for adaptive SCHED_DEADLINE tasks that need to
modify their behavior depending on whether or not there is enough runtime
left in the current period, and/or what is the current absolute deadline.
Notes:
- before returning the instantaneous parameters, the runtime is updated;
- the abs deadline is returned shifted from rq_clock() to ktime_get_ns(),
in CLOCK_MONOTONIC reference; this causes multiple invocations from the
same period to return values that may differ for a few ns (showing some
small drift), albeit the deadline doesn't move, in rq_clock() reference;
- the abs deadline value returned to user-space, as unsigned 64-bit value,
can represent nearly 585 years since boot time;
- setting flags=0 provides the old behavior (retrieve static parameters).
See also the notes from discussion held at OSPM 2025 on the topic
"Making user space aware of current deadline-scheduler parameters".
Signed-off-by: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20250912053937.31636-2-tommaso.cucinotta@santannapisa.it
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program.
Fixes: 592903cdcb ("perf_counter: add an event_list")
Reported-by: Simond Hu <cmdhh1767@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Simond Hu <cmdhh1767@gmail.com>
Link: https://patch.msgid.link/20260224122909.GV1395416@noisy.programming.kicks-ass.net
Merge series from Antoniu Miclaus <antoniu.miclaus@analog.com>:
Add a devres-managed version of spi_new_ancillary_device() that
automatically unregisters the ancillary SPI device when the parent
device is removed.
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.
Fixes: 973207ae3d ("cpufreq: intel_pstate: Rearrange max frequency updates handling code")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221068
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20260225001752.890164-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Detecting a bandwidth change for a sink connected through a DP tunnel
depends on updating the sink's DPRX link rate and lane count.
detect_new_tunnel() -> update_tunnel_state() updates the link
configuration only if the tunnel state changes. However, after the
tunnel is created and bandwidth allocation mode is enabled, the tunnel
state itself may remain unchanged.
Record the sink bandwidth before creating the tunnel and compare it to
the bandwidth after tunnel creation and enabling bandwidth allocation
mode, ensuring that any bandwidth change is detected and userspace is
notified accordingly.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-6-imre.deak@intel.com
Split update_tunnel_state() into two helpers: one that updates the
tunnel state, and another that detects whether the tunnel bandwidth
has changed.
This prepares for a follow-up change that needs to compare the current
bandwidth against the value from before the DP tunnel was detected and
bandwidth allocation mode was enabled.
While at it, document the return value of update_tunnel_state().
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-4-imre.deak@intel.com
update_tunnel_state() checks whether a tunnel state change (e.g.
available tunnel bandwidth) affects the list of valid modes for the
sink connected through the tunnel. If so, its caller sends a hotplug
event so userspace can re-enumerate the modes.
A change in tunnel bandwidth does not affect the mode list if the
bandwidth was above the sink's DPRX bandwidth both before and after the
update, since in that case the effective bandwidth remains limited by
the DPRX.
As get_current_link_bw() via intel_dp_max_link_data_rate() already
returns bandwidth values clamped to the DPRX limit, the condition for
detecting a mode list change can be simplified to:
old_bw != new_bw
Remove the explicit checks for whether the bandwidth was below the
maximum DPRX bandwidth before and after the update, and rely on the
clamped bandwidth values instead.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-3-imre.deak@intel.com
During system resume, restoring the pre-suspend display state must not
fail. This requires preserving the sink capabilities from before
suspend, including the available link bandwidth.
If these capabilities are not preserved, the restore modeset may fail,
either due to a missing sink capability or insufficient link bandwidth
for the restored mode.
When the sink is connected through a DP tunnel, prevent such capability
changes by skipping tunnel state updates during resume. This also avoids
updating the sink state via the tunnel while it is being resumed.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260219182823.926702-2-imre.deak@intel.com
The uverbs CQ creation UAPI allows users to supply their own umem when
creating a CQ. Update mlx4 to support this model while preserving compatibility
with the legacy interface that allocates umem internally.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-13-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Inline the mlx4_ib_get_cq_umem helper function into its two call sites
(mlx4_ib_create_cq and mlx4_alloc_resize_umem) to prepare for the
transition to modern CQ creation interface.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-12-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The uverbs CQ creation UAPI allows users to supply their own umem for a CQ.
Update mlx5 to support this workflow while preserving support for creating
umem through the legacy interface.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-11-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
All drivers already ensure that the number of CQEs is at least 1.
Add this validation to the core so drivers no longer need to repeat it.
Future patches converting to the .create_user_cq() interface will remove
the per‑driver checks.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-8-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In the current implementation, CQ umem is handled both by ib_core and
the driver. ib_core sometimes creates and destroys it, while the driver
also destroys it.
Store the umem in struct ib_cq and ensure that only ib_core manages
its lifetime, relying solely on its internal reference counter.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-5-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
To manage UMEM objects at the core level and reuse the existing
ib_destroy_cq*() flow, move the UMEM files to be built together with
ib_core. Attempting to call ib_umem_release() from verbs.c currently
results in the following error:
depmod: ERROR: Cycle detected: ib_core -> ib_uverbs -> ib_core
depmod: ERROR: Found 2 modules in dependency cycles!
verbs.c:(.text+0x250c): undefined reference to `ib_umem_release'
Link: https://patch.msgid.link/20260213-refactor-umem-v1-4-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Including ib_umem.h currently triggers circular dependency errors.
These issues can be resolved by removing the include of ib_verbs.h,
which was only needed to resolve the struct ib_device pointer.
>> depmod: ERROR: Cycle detected: ib_core -> ib_uverbs -> ib_core
>> depmod: ERROR: Found 2 modules in dependency cycles!
make[3]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make[3]: Target '__modinst' not remade because of errors.
make[2]: *** [Makefile:1960: modules_install] Error 2
make[1]: *** [Makefile:248: __sub-make] Error 2
make[1]: Target 'modules_install' not remade because of errors.
make: *** [Makefile:248: __sub-make] Error 2
make: Target 'modules_install' not remade because of errors.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-2-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The DMA iterator logic was mixed into verbs and umem-specific code,
forcing all users to include rdma/ib_umem.h. Move the block iterator
logic into iter.c and rdma/iter.h so that rdma/ib_umem.h and
rdma/ib_verbs.h can be separated in a follow-up patch.
Link: https://patch.msgid.link/20260213-refactor-umem-v1-1-f3be85847922@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The ioctl structures in libxfs/xfs_fs.h are missing static size checks.
It is useful to have static size checks for these structures as adding
new fields to them could cause issues (e.g. extra padding that may be
inserted by the compiler). So add these checks to xfs/xfs_ondisk.h.
Due to different padding/alignment requirements across different
architectures, to avoid build failures, some structures are ommited from
the size checks. For example, structures with "compat_" definitions in
xfs/xfs_ioctl32.h are ommited.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In libxfs/xfs_ondisk.h, remove some duplicate entries of
XFS_CHECK_STRUCT_SIZE().
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add comments explaining when to use XFS_IS_CORRUPT() and ASSERT()
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Update lazy counters in xfs_growfs_rt_bmblock() similar to the way it
is done xfs_growfs_data_private(). This is because the lazy counters are
not always updated and synching the counters will avoid inconsistencies
between frexents and rtextents(total realtime extent count). This will
be more useful once realtime shrink is implemented as this will prevent
some transient state to occur where frexents might be greater than
total rtextents.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a comment explaining why the sb_frextents are updated outside the
if (xfs_has_lazycount(mp) check even though it is a lazycounter.
RT groups are supported only in v5 filesystems which always have
lazycounter enabled - so putting it inside the if(xfs_has_lazycount(mp)
check is redundant.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Bug description:
If the size of the last rtgroup i.e, the rtg passed to
xfs_last_rt_bmblock() is such that the last rtextent falls in 0th word
offset of a bmblock of the bitmap file tracking this (last) rtgroup,
then in that case xfs_last_rt_bmblock() incorrectly returns the next
bmblock number instead of the current/last used bmblock number.
When xfs_last_rt_bmblock() incorrectly returns the next bmblock,
the loop to grow/modify the bmblocks in xfs_growfs_rtg() doesn't
execute and xfs_growfs basically does a nop in certain cases.
xfs_growfs will do a nop when the new size of the fs will have the same
number of rtgroups i.e, we are only growing the last rtgroup.
Reproduce:
$ mkfs.xfs -m metadir=0 -r rtdev=/dev/loop1 /dev/loop0 \
-r size=32769b -f
$ mount -o rtdev=/dev/loop1 /dev/loop0 /mnt/scratch
$ xfs_growfs -R $(( 32769 + 1 )) /mnt/scratch
$ xfs_info /mnt/scratch | grep rtextents
$ # We can see that rtextents hasn't changed
Fix:
Fix this by returning the current/last used bmblock when the last
rtgroup size is not a multiple xfs_rtbitmap_rtx_per_rbmblock()
and the next bmblock when the rtgroup size is a multiple of
xfs_rtbitmap_rtx_per_rbmblock() i.e, the existing blocks are
completely used up.
Also, I have renamed xfs_last_rt_bmblock() to
xfs_last_rt_bmblock_to_extend() to signify that this function
returns the bmblock number to extend and NOT always the last used
bmblock number.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Sam Sun apparently found a syzbot way to fuzz a filesystem such that
xfs_iget_cache_miss would free the inode before the fserror code could
catch up. Frustratingly he doesn't use the syzbot dashboard so there's
no C reproducer and not even a full error report, so I'm guessing that:
Inodes that are being constructed or torn down inside XFS are not
visible to the VFS. They should never be reported to fserror.
Also, any inode that has been freshly allocated in _cache_miss should be
marked INEW immediately because, well, it's an incompletely constructed
inode that isn't yet visible to the VFS.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Fixes: 5eb4cb18e4 ("xfs: convey metadata health events to the health monitor")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Internal metadata inodes are not exposed to userspace programs, so it
makes no sense to pass them to the fserror functions (aka fsnotify).
Instead, report metadata file problems as general filesystem corruption.
Fixes: 5eb4cb18e4 ("xfs: convey metadata health events to the health monitor")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Pankaj Raghav asks about this code in xfs_healthmon_get:
hm = mp->m_healthmon;
if (hm && !refcount_inc_not_zero(&hm->ref))
hm = NULL;
rcu_read_unlock();
return hm;
(slightly edited to compress a mailing list thread)
"Nit: Should we do a READ_ONCE(mp->m_healthmon) here to avoid any
compiler tricks that can result in an undefined behaviour? I am not sure
if I am being paranoid here.
"So this is my understanding: RCU guarantees that we get a valid object
(actual data of m_healthmon) but does not guarantee the compiler will
not reread the pointer between checking if hm is !NULL and accessing the
pointer as we are doing it lockless.
"So just a barrier() call in rcu_read_lock is enough to make sure this
doesn't happen and probably adding a READ_ONCE() is not needed?"
After some initial confusion I concluded that he's correct. The
compiler could very well eliminate the hm variable in favor of walking
the pointers twice, turning the code into:
if (mp->m_healthmon && !refcount_inc_not_zero(&mp->m_healthmon->ref))
If this happens, then xfs_healthmon_detach can sneak in between the
two sides of the && expression and set mp->m_healthmon to NULL, and
thereby cause a null pointer dereference crash. Fix this by using the
rcu pointer assignment and dereference functions, which ensure that the
proper reordering barriers are in place.
Practically speaking, gcc seems to allocate an actual variable for hm
and only reads mp->m_healthmon once (as intended), but we ought to be
more explicit about requiring this.
Reported-by: Pankaj Raghav <pankaj.raghav@linux.dev>
Fixes: a48373e7d3 ("xfs: start creating infrastructure for health monitoring")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Chris Mason reports that his AI tools noticed that we were using
xfs_perag_put and xfs_group_put to release the group reference returned
by xfs_group_next_range. However, the iterator function returns an
object with an active refcount, which means that we must use the correct
function to release the active refcount, which is _rele.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Chris Mason reports that his AI tools noticed that we were using
xfs_perag_put and xfs_group_put to release the group reference returned
by xfs_group_next_range. However, the iterator function returns an
object with an active refcount, which means that we must use the correct
function to release the active refcount, which is _rele.
Fixes: b8accfd65d ("xfs: add media verification ioctl")
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-xfs/20260206030527.2506821-1-clm@meta.com/
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Chris Mason noticed that there is a copy-paste error in a recent change
to xrep_dir_teardown that nulls out pointers after freeing the
resources.
Fixes: ba408d299a ("xfs: only call xf{array,blob}_destroy if we have a valid pointer")
Link: https://lore.kernel.org/linux-xfs/20260205194211.2307232-1-clm@meta.com/
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The function try_lookup_noperm() can return an error pointer and is not
checked for one.
Add checks for error pointer in xrep_adoption_check_dcache() and
xrep_adoption_zap_dcache().
Detected by Smatch:
fs/xfs/scrub/orphanage.c:449 xrep_adoption_check_dcache() error:
'd_child' dereferencing possible ERR_PTR()
fs/xfs/scrub/orphanage.c:485 xrep_adoption_zap_dcache() error:
'd_child' dereferencing possible ERR_PTR()
Fixes: 73597e3e42 ("xfs: ensure dentry consistency when the orphanage adopts a file")
Cc: stable@vger.kernel.org # v6.16
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The active inode (or active vnode until recently) stat can get much larger
than expected on file systems with a lot of metafile inodes like zoned
file systems on SMR hard disks with 10.000s of rtg rmap inodes.
Remove all metafile inodes from the active counter to make it more useful
to track actual workloads and add a separate counter for active metafile
inodes.
This fixes xfs/177 on SMR hard drives.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Most of them are unused, so mark them as such. Give the remaining ones
names that match their use instead of the historic IRIX ones based on
vnodes. Note that the names are purely internal to the XFS code, the
user interface is based on section names and arrays of counters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Fixup some code alignment issues in xfs_ondisk.c
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Use the already existing rtg_group() wrapper instead of directly
accessing the struct xfs_group member in struct xfs_rtgroup.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
[cem: Conflict resolution against 06873dbd94]
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Introduce xfs_growfs_compute_delta() to calculate the nagcount
and delta blocks and refactor the code from xfs_growfs_data_private().
No functional changes.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Replace ASSERT(sum > 0) with an XFS_IS_CORRUPT() and place it just
after the call to xfs_rtget_summary() so that we don't end up using
an illegal value of sum.
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to
ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf
is immediately unpinned but the umem_dmabuf->pinned flag is still
set. Then, when ib_umem_release() is called, it calls
ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.
Fix this by removing the immediate unpin upon failure and just let
the ib_umem_release/revoke path handle it. This also ensures the
proper unmap-unpin unwind ordering if the dmabuf_map_pages call
happened to fail due to dma_resv_wait_timeout (and therefore has
a non-NULL umem_dmabuf->sgt).
Fixes: 1e4df4a21c ("RDMA/umem: Allow pinned dmabuf umem usage")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260224234153.1207849-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When listening on wildcard addresses we have a global list for the application
layer rdma_cm_id and for any existing device or any device added in future we
try to listen on any wildcard listener.
When the listener has a restricted_node_type we should prevent listening on
devices with a different node type.
While there fix the documentation comment of rdma_restrict_node_type()
to include rdma_resolve_addr() instead of having rdma_bind_addr() twice.
Fixes: a760e80e90 ("RDMA/core: introduce rdma_restrict_node_type()")
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://patch.msgid.link/20260224165951.3582093-2-metze@samba.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
