Current code does.
- Read nohz.nr_cpus
- Check if the time has passed to do NOHZ idle balance
Instead do this.
- Check if the time has passed to do NOHZ idle balance
- Read nohz.nr_cpus
This will skip the read most of the time in normal system usage.
i.e when there are nohz.nr_cpus (system is not 100% busy).
Note that when there are no idle CPUs(100% busy), even if the flag gets
set to NOHZ_STATS_KICK | NOHZ_NEXT_KICK, find_new_ilb will fail and
there will be no NOHZ idle balance. In such cases there will be a very
narrow window where, kick_ilb will be called un-necessarily.
However current functionality is still retained.
Note: This patch doesn't solve any cacheline overheads. No improvement
in performance apart from saving a few cycles of reading nohz.nr_cpus
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260115073524.376643-2-sshegde@linux.ibm.com
The avg_vruntime comment contains a couple of mathematical notation
issues:
- The summation over w_i * (V - v_i) is written in an ambiguous form
- The delta term refers to v instead of v0, which is inconsistent
with the code and preceding explanation
Fix these to make the comment mathematically correct and consistent
with the implementation.
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114090035.19033-1-zhanxusheng@xiaomi.com
Commit adcc3bfa88 ("sched: Adapt sched tracepoints for RV task model")
added a tracepoint to the need_resched action that can be triggered also
by set_tsk_need_resched.
This function was previously accessible from out-of-tree modules but
it's no longer available because the __trace_set_need_resched() symbol
is not exported (together with the tracepoint itself, which was exported
in a separate patch) and building such modules fails.
Export __trace_set_need_resched to modules to fix those build issues.
Fixes: adcc3bfa88 ("sched: Adapt sched tracepoints for RV task model")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://patch.msgid.link/20260112140413.362202-1-gmonaco@redhat.com
All the Lemans IOT variants boards are using Gunyah hypervisor which
means that, so far, Linux-based OS could only boot in EL1 on those
devices. However, it is possible for us to boot Linux at EL2 on these
devices [1].
When running under Gunyah, the remote processor firmware IOMMU streams
are controlled by Gunyah. However, without Gunyah, the IOMMU is managed
by the consumer of this DeviceTree. Therefore, describe the firmware
streams for each remote processor.
Add a EL2-specific DT overlay and apply it to Lemans IOT variant
devices to create -el2.dtb for each of them alongside "normal" dtb.
[1]
https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefi
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-14-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pierre reported hitting balance callback warnings for deadline tasks
after commit 6455ad5346 ("sched: Move sched_class::prio_changed()
into the change pattern").
It turns out that DEQUEUE_SAVE+ENQUEUE_RESTORE does not preserve DL
priority and subsequently trips a balance pass -- where one was not
expected.
From discussion with Juri and Luca, the purpose of this clause was to
deal with tasks new to DL and all those sites will have MOVE set (as
well as CLASS, but MOVE is move conservative at this point).
Per the previous patches MOVE is audited to always run the balance
callbacks, so switch enqueue_dl_entity() to use MOVE for this case.
Fixes: 6455ad5346 ("sched: Move sched_class::prio_changed() into the change pattern")
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260114130528.GB831285@noisy.programming.kicks-ass.net
While FIFO/RR have static priority, DEADLINE is a dynamic priority
scheme. Notably it has static priority -1. Do not assume the priority
doesn't change for deadline tasks just because the static priority
doesn't change.
This ensures DL always sees {DE,EN}QUEUE_MOVE where appropriate.
Fixes: ff77e46853 ("sched/rt: Fix PI handling vs. sched_setscheduler()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260114130528.GB831285@noisy.programming.kicks-ass.net
The {DE,EN}QUEUE_MOVE flag indicates a task is allowed to change
priority, which means there could be balance callbacks queued.
Therefore audit all MOVE users and make sure they do run balance
callbacks before dropping rq-lock.
Fixes: 6455ad5346 ("sched: Move sched_class::prio_changed() into the change pattern")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260114130528.GB831285@noisy.programming.kicks-ass.net
When setup_new_dl_entity() is called from enqueue_task_dl() ->
enqueue_dl_entity(), the rq-clock should already be updated, and
calling update_rq_clock() again is not right.
Move the update_rq_clock() to the one other caller of
setup_new_dl_entity(): sched_init_dl_server().
Fixes: 9f239df555 ("sched/deadline: Initialize dl_servers after SMP")
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20260113115622.GA831285@noisy.programming.kicks-ass.net
Pratheek tripped a WARN and noted the following issue:
> Inspecting the set of events that led to the warning being triggered
> showed the following:
>
> systemd-1 [008] dN.31 ...: do_set_cpus_allowed: set_cpus_allowed begin!
>
> systemd-1 [008] dN.31 ...: sched_change_begin: Begin!
> systemd-1 [008] dN.31 ...: sched_change_begin: Before dequeue_task()!
> systemd-1 [008] dN.31 ...: update_curr_dl_se: update_curr_dl_se: ENQUEUE_REPLENISH
> systemd-1 [008] dN.31 ...: enqueue_dl_entity: enqueue_dl_entity: ENQUEUE_REPLENISH
> systemd-1 [008] dN.31 ...: replenish_dl_entity: Replenish before: 14815760217
> systemd-1 [008] dN.31 ...: replenish_dl_entity: Replenish after: 14816960047
> systemd-1 [008] dN.31 ...: sched_change_begin: Before put_prev_task()!
>
> systemd-1 [008] dN.31 ...: sched_change_end: Before enqueue_task()!
> systemd-1 [008] dN.31 ...: sched_change_end: Before put_prev_task()!
> systemd-1 [008] dN.31 ...: prio_changed_dl: Queuing pull task on prio change: 14815760217 -> 14816960047
> systemd-1 [008] dN.31 ...: prio_changed_dl: Queuing balance callback!
> systemd-1 [008] dN.31 ...: sched_change_end: End!
>
> systemd-1 [008] dN.31 ...: do_set_cpus_allowed: set_cpus_allowed end!
> systemd-1 [008] dN.21 ...: __schedule: Woops! Balance callback found!
>
> 1. sched_change_begin() from guard(sched_change) in
> do_set_cpus_allowed() stashes the priority, which for the deadline
> task, is "p->dl.deadline".
> 2. The dequeue of the deadline task replenishes the deadline.
> 3. The task is enqueued back after guard's scope ends and since there is
> no *_CLASS flags set, sched_change_end() calls
> dl_sched_class->prio_changed() which compares the deadline.
> 4. Since deadline was moved on dequeue, prio_changed_dl() sees the value
> differ from the stashed value and queues a balance pull callback.
> 5. do_set_cpus_allowed() finishes and drops the rq_lock without doing a
> do_balance_callbacks().
> 6. Grabbing the rq_lock() at subsequent __schedule() triggers the
> warning since the balance pull callback was never executed before
> dropping the lock.
Meaning get_prio_dl() ought to update current and return an up-to-date
value.
Fixes: 6455ad5346 ("sched: Move sched_class::prio_changed() into the change pattern")
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260106104113.GX3707891@noisy.programming.kicks-ass.net
There's no need to check a userspace-provided GT ID (which may come from
any tile) against the number of GTs that can be present on a single
tile. The xe_device_get_gt() lookup already checks that the GT ID passed
is valid for the current device.(Matt Roper)
Signed-off-by: Nakshtra Goyal <nakshtra.goyal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260113091928.67446-1-nakshtra.goyal@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Currently the post-populate callbacks handle copying source pages into
private GPA ranges backed by guest_memfd, where kvm_gmem_populate()
acquires the filemap invalidate lock, then calls a post-populate
callback which may issue a get_user_pages() on the source pages prior to
copying them into the private GPA (e.g. TDX).
This will not be compatible with in-place conversion, where the
userspace page fault path will attempt to acquire the filemap invalidate
lock while holding the mm->mmap_lock, leading to a potential ABBA
deadlock.
Address this by hoisting the GUP above the filemap invalidate lock so
that these page faults path can be taken early, prior to acquiring the
filemap invalidate lock.
It's not currently clear whether this issue is reachable with the
current implementation of guest_memfd, which doesn't support in-place
conversion, however it does provide a consistent mechanism to provide
stable source/target PFNs to callbacks rather than punting to
vendor-specific code, which allows for more commonality across
architectures, which may be worthwhile even without in-place conversion.
As part of this change, also begin enforcing that the 'src' argument to
kvm_gmem_populate() must be page-aligned, as this greatly reduces the
complexity around how the post-populate callbacks are implemented, and
since no current in-tree users support using a non-page-aligned 'src'
argument.
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20260108214622.1084057-7-michael.roth@amd.com
[sean: avoid local "p" variable]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since it was never possible to use a non-PAGE_SIZE-aligned @source_addr,
go ahead and document this as a requirement. This is in preparation for
enforcing page-aligned @source_addr for all architectures in
guest_memfd.
Reviewed-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20260108214622.1084057-6-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In the past, KVM_SEV_SNP_LAUNCH_UPDATE accepted a non-page-aligned
'uaddr' parameter to copy data from, but continuing to support this with
new functionality like in-place conversion and hugepages in the pipeline
has proven to be more trouble than it is worth, since there are no known
users that have been identified who use a non-page-aligned 'uaddr'
parameter.
Rather than locking guest_memfd into continuing to support this, go
ahead and document page-alignment as a requirement and begin enforcing
this in the handling function.
Reviewed-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260108214622.1084057-5-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
guest_memfd currently uses the folio uptodate flag to track:
1) whether or not a page has been cleared before initial usage
2) whether or not the architecture hooks have been issued to put the
page in a private state as defined by the architecture
In practice, (2) is only actually being tracked for SEV-SNP VMs, and
there do not seem to be any plans/reasons that would suggest this will
change in the future, so this additional tracking/complexity is not
really providing any general benefit to guest_memfd users. On the other
hand, future plans around in-place conversion and hugepage support will
make the burden of tracking this information within guest_memfd even more
complex.
With in-place conversion and hugepage support, the plan is to use the
per-folio uptodate flag purely to track the initial clearing of folios,
whereas conversion operations could trigger multiple transitions between
'prepared' and 'unprepared' and thus need separate tracking. Since
preparation generally happens during fault time, i.e. on the "read-side"
of any VM-wide locks that might protect state tracked by guest_memfd,
supporting concurrent handling of page faults would likely require more
complex locking schemes if the "preparedness" state were tracked by
guest_memfd, i.e. if it needs to be updated as part of handling the fault.
Instead of keeping this current/future complexity within guest_memfd for
what is essentially just SEV-SNP, just drop the tracking for (2) and have
the arch-specific preparation hooks get triggered unconditionally on
every fault so the arch-specific hooks can check the preparation state
directly and decide whether or not a folio still needs additional
preparation. In the case of SEV-SNP, the preparation state is already
checked again via the preparation hooks to avoid double-preparation, so
nothing extra needs to be done to update the handling of things there.
Reviewed-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Vishal Annapurve <vannapurve@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260108214622.1084057-4-michael.roth@amd.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
kvm_gmem_populate(), and the associated post-populate callbacks, have
some limited support for dealing with guests backed by hugepages by
passing the order information along to each post-populate callback and
iterating through the pages passed to kvm_gmem_populate() in
hugepage-chunks.
However, guest_memfd doesn't yet support hugepages, and in most cases
additional changes in the kvm_gmem_populate() path would also be needed
to actually allow for this functionality.
This makes the existing code unnecessarily complex, and makes changes
difficult to work through upstream due to theoretical impacts on
hugepage support that can't be considered properly without an actual
hugepage implementation to reference. So for now, remove what's there
so changes for things like in-place conversion can be
implemented/reviewed more efficiently.
Suggested-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20260108214622.1084057-3-michael.roth@amd.com
[sean: check for !IS_ERR() before checking folio_order()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace sprintf() with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred to format sysfs output as it provides better
bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/20260113082130.789891-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix typo "nagative" -> "negative" for cpu argument value in
comment section.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260111160739.15984-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace all sprintf() calls with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred over sprintf() for formatting sysfs output
as it provides better bounds checking and prevents potential buffer
overflows.
Also, replace sprintf() with sysfs_emit() in show_constraint_name()
and simplify the code by removing the redundant strlen() call since
sysfs_emit() returns the length.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Link: https://patch.msgid.link/20260111141237.12340-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to use snprintf() with a format specifier to copy 'buf'
to 'name'; use strscpy() directly instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20260112174901.767434-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On SDM845 SPI uses hardware-provided chip select, while specifying
cs-gpio makes the driver request GPIO pin, which on DB845c conflicts
with the normal host controllers pinctrl entry.
Drop the cs-gpios property to restore SPI functionality.
Fixes: cb29e7106d ("arm64: dts: qcom: db845c: Add support for MCP2517FD")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-7-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow commit 9c92d36b0b ("arm64: dts: qcom: qrb2210-rb1: Fix UART3
wakeup IRQ storm") and apply the similar fix to the RB2 platform.
Having RX / TX pins as pull up and wakup interrupt as high-level
triggered generates an interrupt storm when trying to suspend the
device. Avoid the storm by using the falling edge trigger (as all other
platforms do).
Fixes: cab60b1665 ("arm64: dts: qcom: qrb4210-rb2: Enable bluetooth")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-wcn3990-pwrctl-v2-6-0386204328be@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Replace seq_printf() with seq_puts() when outputting a constant string
without format specifiers in the thermal mitigation debugfs interface.
seq_puts() is more appropriate and efficient as it avoids unnecessary
format string parsing overhead.
No functional change.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Link: https://patch.msgid.link/20260110183912.372215-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace all sprintf() calls with sysfs_emit() and sysfs_emit_at() in
sysfs show functions.
sysfs_emit() and sysfs_emit_at() are preferred over sprintf() for
formatting sysfs output as they provide better bounds checking and
prevent potential buffer overflows.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Link: https://patch.msgid.link/20260110092851.9078-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bugfixes:
- NFS: Fix another deadlock involving nfs_release_folio()
- NFS/localio: Stop I/O upon hitting a fatal error
- NFS/localio: Deal with page offsets that are > PAGE_SIZE
- NFS: Fix size read races in truncate, fallocate and copy offload
- NFSv4.x: Several bugfixes for the directory delegation client code
- pNFS: Fix a pNFS-related deadlock when returning delegations during open
- pNFS: Fix memory leaks in various error paths
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR8xgHcVzJNfOYElJo6EXfx2a6V0QUCaWlCPwAKCRA6EXfx2a6V
0QZoAP49jxzzGogZlW0muoCmqZ9MXLH4OxlhmbLw/xKJlxzZqAD9F+p4Oq0uZMeh
t4mMaLdlVdrNnEXxpN3H0Vm9tH64tQo=
=IDVZ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix another deadlock involving nfs_release_folio()
- localio:
- Stop I/O upon hitting a fatal error
- Deal with page offsets that are > PAGE_SIZE
- Fix size read races in truncate, fallocate and copy offload
- Several bugfixes for the NFSv4.x directory delegation client code
- pNFS:
- Fix a deadlock when returning delegations during open
- Fix memory leaks in various error paths
* tag 'nfs-for-6.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix size read races in truncate, fallocate and copy offload
NFS: Don't immediately return directory delegations when disabled
NFS/localio: Deal with page bases that are > PAGE_SIZE
NFS/localio: Stop further I/O upon hitting an error
NFSv4.x: Directory delegations don't require any state recovery
NFSv4: Don't free slots prematurely if requesting a directory delegation
NFSv4: Fix nfs_clear_verifier_delegated() for delegated directories
NFS: Fix directory delegation verifier checks
pnfs/blocklayout: Fix memory leak in bl_parse_scsi()
pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()
NFS: Fix a deadlock involving nfs_release_folio()
pNFS: Fix a deadlock when returning a delegation during open()
If the pre-operation file size is read before locking the inode and
quiescing O_DIRECT writes, then nfs_truncate_last_folio() might end up
overwriting valid file data.
Fixes: b1817b18ff ("NFS: Protect against 'eof page pollution'")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
- Wipe the INITRD config table upon consumption so it doesn't confuse
kexec
- Let APEI/GHES maintainers take responsibility for CPER processing
logic
- Fix wrong return value in CPER string helper routine
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaWio5AAKCRAwbglWLn0t
XKgSAQDFigknu/LkOwYhrY4elRRQbnH11kLwB4EPLU8cYReVXAEAy9O8m80+8zIo
/u30MXnGZWdzC5oTrkheNJnFg2ESRA0=
=hMLX
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Wipe the INITRD config table upon consumption so it doesn't confuse
kexec
- Let APEI/GHES maintainers take responsibility for CPER processing
logic
- Fix wrong return value in CPER string helper routine
* tag 'efi-fixes-for-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/cper: Fix cper_bits_to_str buffer handling and return value
MAINTAINERS: add cper to APEI files
efi: Wipe INITRD config table from memory after consumption
In mpfs_sys_controller_probe(), if of_get_mtd_device_by_node() fails,
the function returns immediately without freeing the allocated memory
for sys_controller, leading to a memory leak.
Fix this by jumping to the out_free label to ensure the memory is
properly freed.
Also, consolidate the error handling for the mbox_request_channel()
failure case to use the same label.
Fixes: 742aa6c563 ("soc: microchip: mpfs: enable access to the system controller's flash")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Invisible symbol REGMAP defaults to y when any of the REGMAP_* symbols
is enabled, effectively auto-enabling it when needed. However,
REGMAP_SLIMBUS is missing from the list.
Currently this does not cause any issues, as all symbols selecting
REGMAP_SLIMBUS also select REGMAP and/or REGMAP_IRQ. Add REGMAP_SLIMBUS
to the list for consistency, and to prevent any future issues.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/47872f8f4cf613e9710963bf871c6ac7b2ce81e8.1768494166.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Both clocks and clock-names are missing (a lot of) entries: add
all the used audio clocks and their description and also fix the
example node.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: c861af7861 ("ASoC: dt-bindings: mediatek: mt8192: re-add audio afe document")
Link: https://patch.msgid.link/20260115125624.73598-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In es8328_hw_params(), the return value of
snd_soc_component_update_bits() was ignored. This could lead to silent
failures where the hardware is left in an inconsistent state if a
regmap write fails.
Check the return value of regmap updates and propagate any errors back
to the ALSA core. Return 0 on success to match the DAI ops convention.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260115161359.41979-1-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- four kerneldoc fixes from Bagas Sanjaya
- four DAMON fixes from SeongJae
- four mremap VMA-related fixes from Lorenzo
- various singletons - please see the changelogs for details
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaWkP3gAKCRDdBJ7gKXxA
jnmTAQCBiCyw7Pvvak5OM8Of0qQ8m/jQmNMBPRrd5M3tAAEOlwD9F7E6RjcmyItU
k+sboDgNKTvgdRHTmRzj1t96aXJrSQQ=
=OxTh
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-01-15-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
- kerneldoc fixes from Bagas Sanjaya
- DAMON fixes from SeongJae
- mremap VMA-related fixes from Lorenzo
- various singletons - please see the changelogs for details
* tag 'mm-hotfixes-stable-2026-01-15-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (30 commits)
drivers/dax: add some missing kerneldoc comment fields for struct dev_dax
mm: numa,memblock: include <asm/numa.h> for 'numa_nodes_parsed'
mailmap: add entry for Daniel Thompson
tools/testing/selftests: fix gup_longterm for unknown fs
mm/page_alloc: prevent pcp corruption with SMP=n
iommu/sva: include mmu_notifier.h header
mm: kmsan: fix poisoning of high-order non-compound pages
tools/testing/selftests: add forked (un)/faulted VMA merge tests
mm/vma: enforce VMA fork limit on unfaulted,faulted mremap merge too
tools/testing/selftests: add tests for !tgt, src mremap() merges
mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge
mm/zswap: fix error pointer free in zswap_cpu_comp_prepare()
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
mm/damon/sysfs-scheme: cleanup quotas subdirs on scheme dir setup failure
mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure
mm/damon/sysfs: cleanup intervals subdirs on attrs dir setup failure
mm/damon/core: remove call_control in inactive contexts
powerpc/watchdog: add support for hardlockup_sys_info sysctl
mips: fix HIGHMEM initialization
mm/hugetlb: ignore hugepage kernel args if hugepages are unsupported
...
Simplify things by computing the detailed slice configuration using
intel_dp_dsc_get_slice_config(), instead of open-coding the same.
While at it add a TODO comment to intel_dp_dsc_compute_config() to
explore if it's worth increasing the number of VDSC stream engines used,
in order to reduce the minimum CDCLK required.
v2: Add a TODO comment to intel_dp_dsc_compute_config() to explore if
it's worth increasing the number of slices in order to use a lower
CDCLK. (Jouni)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-16-imre.deak@intel.com
Add intel_dp_dsc_get_slice_config() to compute the detailed slice
configuration and determine the slices-per-line value (returned by
intel_dp_dsc_get_slice_count()) using this function.
v2: Fix incorrectly returning false from intel_dp_dsc_min_slice_count()
due to rebase fail. (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-15-imre.deak@intel.com
Unify the DP and eDP slices-per-line computation. Atm eDP simply returns
the maximum slices-per-line value supported by the sink, but using the
same helper function for both cases still makes sense, since a follow-up
change will compute the detailed slice config for both cases.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-14-imre.deak@intel.com
Use intel_dsc_get_slice_config() for DSI to compute the slice
configuration based on the slices-per-line sink capability, instead of
open-coding the same.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-13-imre.deak@intel.com
Add intel_dsc_get_slice_config() and move the logic to select a given
slice configuration to that function from the configuration loop in
intel_dp_dsc_get_slice_count(). The same functionality can be used by
other outputs like DSI as well, done as a follow-up.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-12-imre.deak@intel.com
Simplify the slice config loop in intel_dp_dsc_get_slice_count(), using
the loop iterator as the slices-per-pipe value directly, instead of
looking up the same value from an array.
While at it move the code comment about the slice configuration closer
to where the configuration is determined and clarify it a bit.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-11-imre.deak@intel.com
There is no reason to use the more specific u8 type for slice count
variables, use the more generic int type instead.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-9-imre.deak@intel.com
Factor out intel_dp_dsc_min_slice_count() for making
intel_dp_dsc_get_slice_count() more readable and also to prepare for a
follow-up change unifying the eDP and DP slice count/config computation.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-8-imre.deak@intel.com
By now all the places are updated to track the DSC slice configuration
in intel_crtc_state::dsc.slice_config, so calculate the slices-per-line
value using that config, instead of using
intel_crtc_state::dsc.slice_count caching the same value and remove
the cached slice_count.
v2: Rebase on latest drm-tip, converting another user of dsc.slice_count
in intel_vdsc_min_cdclk().
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com> # v1
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-7-imre.deak@intel.com
Add tracking for the DP DSC pipes-per-line and slices-per-stream value
in the slice config state and compute the current slices-per-line
(slice_count) value using this slice config. The slices-per-line value
used atm will be removed by a follow-up change after converting all the
places using it to use the slice config instead.
For now the slices-per-stream value is calculated based on the
slices-per-line value (slice_count) calculated by the
drm_dp_dsc_sink_max_slice_count() / intel_dp_dsc_get_slice_count()
functions. In a follow-up change these functions will be converted to
calculate the slices-per-stream value directly, along with the detailed
slice configuration.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-6-imre.deak@intel.com
Add tracking for the DSI DSC pipes-per-line and slices-per-stream value
in the slice config state and compute the current slices-per-line value
using this slice config state. The slices-per-line value used atm will
be removed by a follow-up change after converting all the places using
it to use the detailed slice config instead.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-5-imre.deak@intel.com
Move the initialization of the DSI DSC streams-per-pipe value to
fill_dsc() next to where the corresponding (per-line) slice_count value
is initialized. This allows converting the initialization to use the
detailed slice configuration state in follow-up changes.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-4-imre.deak@intel.com
Move the tracking for the DSC stream count from
intel_crtc_state::dsc.num_streams to
intel_crtc_state::dsc.slice_config.streams_per_pipe.
While at it add a TODO comment to read out the full DSC configuration
from HW including the pipes-per-line and slices-per-stream values.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260114162232.92731-3-imre.deak@intel.com
