The Renesas RZ/T2H (R9A09G077) SoC includes pins which can be routed via
the ICU to generate interrupts.
Add support for using the pin controller as an interrupt chip.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251205150234.2958140-6-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/N2H (R9A09G087) SoC includes a Temperature Sensor Unit
(TSU). The device provides real-time temperature measurements for
thermal management, utilizing a single dedicated channel for temperature
sensing.
The TSU loads calibration data via SMC SIP.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251126130356.2768625-10-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/T2H (R9A09G077) SoC includes a Temperature Sensor Unit
(TSU). The device provides real-time temperature measurements for
thermal management, utilizing a single dedicated channel for temperature
sensing.
The TSU loads calibration data via SMC SIP.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251126130356.2768625-9-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
TCR2_ELx.E0POE is set during smp_init().
However, this bit is not reprogrammed when the CPU enters suspension and
later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE
and there is no save/restore logic for the TCR2_ELx system register.
As a result, the E0POE feature no longer works after cpu_resume().
To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume()
path, rather than adding related logic to __cpu_setup(), taking into account
possible future extensions of the TCR2_ELx feature.
Fixes: bf83dae90f ("arm64: enable the Permission Overlay Extension for EL0")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
msr_set_bit() takes a bit number to set but MSR_ZEN2_SPECTRAL_CHICKEN_BIT
is a bit mask. The usual pattern that code uses is a _BIT-named type
macro instead of a mask.
So convert it to a bit number to reflect that.
Also, msr_set_bit() already does the reading and checking whether the
bit needs to be set so use that instead of a local variable.
Fixup tabbing while at it.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://patch.msgid.link/20251230110731.28108-1-bp@kernel.org
If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If the assert() fails due to timeout error, set the reset register bit
back to deasserted state. This change is needed especially for handling
assert error in suspend() callback that expect the device to be in
operational state in case of failure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108123433.104464-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The computation:
end = start + (size - (start_phys_aligned - start_phys)) / incr
could theoretically underflow if size < offset, leading to a massive
iteration.
Add VM_WARN_ON_ONCE() to detect cases where the region size is smaller
than the alignment offset. While this should never happen in practice
due to memblock guarantees, the warning helps catch potential bugs in
early memory initialization code.
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Kevin Lourenco <klourencodev@gmail.com>
Link: https://patch.msgid.link/20251229161321.9079-1-klourencodev@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
memblock_free_pages() currently takes both a struct page * and the
corresponding PFN. The page pointer is always derived from the PFN at
call sites (pfn_to_page(pfn)), making the parameter redundant and also
allowing accidental mismatches between the two arguments.
Simplify the interface by removing the struct page * argument and
deriving the page locally from the PFN, after the deferred struct page
initialization check. This keeps the behavior unchanged while making
the helper harder to misuse.
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Link: https://patch.msgid.link/tencent_F741CE6ECC49EE099736685E60C0DBD4A209@qq.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization. This will cause
lockdep splats when used together with shared GPIOs going through the
GPIO shared proxy driver.
Fixes: 6e9be3abb7 ("pinctrl: Add driver support for Amlogic SoCs")
Cc: stable@vger.kernel.org
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Closes: https://lore.kernel.org/all/CAFBinCAc7CO8gfNQakCu3LfkYXuyTd2iRpMRm8EKXSL0mwOnJw@mail.gmail.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
In gs_can_open(), the URBs for USB-in transfers are allocated, added to the
parent->rx_submitted anchor and submitted. In the complete callback
gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In
gs_can_close() the URBs are freed by calling
usb_kill_anchored_urbs(parent->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in gs_can_close().
Fix the memory leak by anchoring the URB in the
gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260105-gs_usb-fix-memory-leak-v2-1-cc6ed6438034@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We currently only build these drivers on ARM but there's nothing that
should stop us from building it with allmodconfig on other
architectures. Extend the build coverage for all meson drivers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
When es58x_alloc_rx_urbs() fails to allocate the requested number of
URBs but succeeds in allocating some, it returns an error code.
This causes es58x_open() to return early, skipping the cleanup label
'free_urbs', which leads to the anchored URBs being leaked.
As pointed out by maintainer Vincent Mailhol, the driver is designed
to handle partial URB allocation gracefully. Therefore, partial
allocation should not be treated as a fatal error.
Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been
allocated, restoring the intended behavior and preventing the leak
in es58x_open().
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Reported-by: syzbot+e8cb6691a7cf68256cb8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e8cb6691a7cf68256cb8
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251223011732.39361-1-swilczek.lx@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
GPIO core already handles checking the offset against the number of
GPIOs as well as missing any of the GPIO chip callbacks. Remove the
unnecessary bits.
Also, the offset check was off-by-one as reported by Dan.
Fixes: 2b03d9a40c ("gpio: add gpio-line-mux driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aV4b6GAGz1zyf8Xy@stanley.mountain/
Tested-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://lore.kernel.org/r/20260107085833.17338-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
After scanning the devicetree, we remove all entries that have only one
reference, while creating GPIO shared proxies for the remaining, shared
entries. However: for the reset-gpio corner-case, we will have two
references for a "reset-gpios" pin that's not really shared. In this
case one will come from the actual consumer fwnode and the other from
the potential auxiliary reset-gpio device. This causes the GPIO core to
create unnecessary GPIO shared proxy devices for pins that are not
really shared.
Add a function that can detect this situation and remove entries that
have exactly two references but one of them is a reset-gpio.
Fixes: 7b78b26757 ("gpio: shared: handle the reset-gpios corner case")
Link: https://lore.kernel.org/r/20260108-gpio-shared-false-positive-v1-1-5dbf8d1b2f7d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The help text of CONFIG_DRM_PANIC_SCREEN_QR_CODE documents the expected
value to CONFIG_DRM_PANIC_SCREEN as "qr_code" but drm_panic_type_map
checks for "qr". Adjust drm_panic_type_map and the module description to
match so that existing configurations do not stop working.
Fixes: e85e9ccf3f ("drm/panic: Report invalid or unsupported panic modes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260105-drm_panic-handle-invalid-drm_panic_screen-v1-2-55228bd4b0f8@kernel.org
If a user has set an invalid CONFIG_DRM_PANIC_SCREEN value (such as
"qr_code" without CONFIG_DRM_PANIC_SCREEN_QR_CODE=y due to missing or
incorrect Rust dependencies), there is a panic when accessing
/sys/module/drm/parameters/panic_screen:
[ 12.218375] BUG: unable to handle page fault for address: 0000000796dd8818
[ 12.219737] #PF: supervisor read access in kernel mode
...
[ 12.227167] RIP: 0010:drm_panic_type_get+0x1b/0x30
If drm_panic_type_set() does not find a valid drm_panic_type enumeration
in drm_panic_type_map based on the provided value, it does not change
drm_panic_type from the default -1 value, which is not a valid index for
accessing drm_panic_type_map in drm_panic_type_get(), resulting in the
crash.
Validate the value of CONFIG_DRM_PANIC_SCREEN at boot time via the
return value of drm_panic_type_set() in drm_panic_init() and explicitly
fall back to the default of "user" with a message to the user so that
they can adjust their configuration or fix missing dependencies.
[ 0.800697] Unsupported value for CONFIG_DRM_PANIC_SCREEN ('qr_code'), falling back to 'user'...
Fixes: e85e9ccf3f ("drm/panic: Report invalid or unsupported panic modes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260105-drm_panic-handle-invalid-drm_panic_screen-v1-1-55228bd4b0f8@kernel.org
Add 'lli-bus-interface-ahb2' and 'mem-bus-interface-ahb2' properties to
the PL080 DMA controller device tree node, tested with dmatest utility.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add properties declared in the new DT binding nxp,lpc3220-dmamux.yaml
and corresponding phandles.
[vzapolskiy]:
1. rebased the change,
2. dmamux unit address shall be 0x78 instead of 0x7c,
3. removed unsupported 'dmas' properties from sd, ssp0, ssp1 and HS UARTs,
4. more non-functional updates by reordering properies,
5. minor updates to the commit message.
Link to the original change:
* https://lore.kernel.org/linux-arm-kernel/20240627150046.258795-6-piotr.wojtaszczyk@timesys.com/
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The clock controller is a part of NXP LPC32xx system control block (SCB),
and SCB provides a number of controllers apart of the clock controller.
[vzapolskiy]:
1. kept a simple comment,
2. renamed SoC specific compatible to 'nxp,lpc3220-scb' due to the SoC UM,
3. changed size in 'ranges', since it should cover more SCB functions,
4. updated the commit message.
Link to the original change:
* https://lore.kernel.org/linux-arm-kernel/20240627150046.258795-5-piotr.wojtaszczyk@timesys.com/
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
SLC and MLC NAND flash controllers fire the muxed interrupt FLASH_INT to
the SoC, add the interrupt property to the SLC device tree node.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The device tree node name of NAND controllers shall be 'nand-controller',
while 'flash' name is the name of NAND chip device tree nodes.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
PL022 binding require two clocks to be defined but NXP LPC32xx platform
doesn't comply with the bindings and define only one clock i.e apb_pclk.
Update SPI clocks and clocks-names property by adding appropriate clock
reference to make it compliant with the bindings.
Noteworthy, strictly speaking the change tackles DT ABI by changing
the order in the list of clock-names property values, however this level
of impact is considered as acceptable.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
[vzapolskiy: rebased and minor update to the commit message]
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The coming chip RTL8922D has variant of hardware with different AID. Add
AID field to header of firmware elements, and compare AID with the value
read from hardware.
Currently, apply this rule to BB and RF parameters.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260106030911.15528-10-pkshih@realtek.com
CMAC H2C command is to configure CMAC such as TX retry and padding. Add to
update CMAC function block when BT-coex want shorter TX time due to
timeslot assignment, or when MCC want higher retry time to improve
connection rate.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260106030911.15528-8-pkshih@realtek.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- draw: Add API to check if a format conversion can be done
- panic: Rename draw_panic_static_* to draw_panic_screen_*, Add kunit
tests
- shmem: Improve tests
Driver Changes:
- ast: Big endian fixes
- etnaviv: Add PPU flop reset support
- panfrost: Add GPU_PM_RT support for RZ/G3E SoC
- panthor: multiple fixes around VM termination, huge page support
- pl111: Fix build regression
- v3d: Fix DMA segment size
- bridge:
- Add connector argument to .hpd_notify
- Plenty of patches to convert existing drivers to refcounting
- Convert Rockchip's inno hdmi support to a proper bridge
- lontium-lt9611uxc: Switch to HDMI audio helpers
- panel:
- New panel: BOE NV140WUM-T08
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaV9qAAAKCRAnX84Zoj2+
duxGAX4vPiNmTlX8Sh0cTPW0eOUtHCBc2kf1TdWPmczCWeF9PVuMICCWYfhgWaJf
d7yTLaQBfiniO/x1+uUx5izUVrdVbyp6i9ZooijwBOn2cvxZuW2UT0/1I6040L1G
T+vcJsmJoA==
=l26/
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-01-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- draw: Add API to check if a format conversion can be done
- panic: Rename draw_panic_static_* to draw_panic_screen_*, Add kunit
tests
- shmem: Improve tests
Driver Changes:
- ast: Big endian fixes
- etnaviv: Add PPU flop reset support
- panfrost: Add GPU_PM_RT support for RZ/G3E SoC
- panthor: multiple fixes around VM termination, huge page support
- pl111: Fix build regression
- v3d: Fix DMA segment size
- bridge:
- Add connector argument to .hpd_notify
- Plenty of patches to convert existing drivers to refcounting
- Convert Rockchip's inno hdmi support to a proper bridge
- lontium-lt9611uxc: Switch to HDMI audio helpers
- panel:
- New panel: BOE NV140WUM-T08
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260108-literate-nyala-of-courtesy-de501a@houat
