Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
This was lost in the 6.19 merge so reapply it.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3925683515)
dac_load_detection can be NULL in some scenario, so checking it before
calling.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 179176134b)
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7edb503fe4)
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmleKu8ACgkQ/lWMcqZw
E8NIAw//SDUHAGuSU6trFYt1GueHcGk+KjEN8aRIaE+6v/IvCqfOaL7HeZXDm0TB
C0piYBioGowhT8kAekYSRs6Gm/uCQjB65tflqU53V3SZf4tZfyDAqAxK2zbVkpI/
ZIqdsWoQwazk6Qqe92+67jjYEJF+h1ycVYD72qRf3V4SduSmZoeARfRkAlZ+ZAGO
zzKmy2Jb8WMnVeemxtc5XTc5+0fjjDaFmpkHuOkdo7+7zX2rZw1JPU6HIy2xVWBv
/NvOqDGf+ALu3aT6FHzJvcH4uRXsAxj/q505jq9YrxJZjMpMq0EsW+/8/pjuBEYG
CdsyHlJnnx1br20dBb7MU68jwvlXuVc7qbaAwC0+eRgX9k8apetiV/7WwOxwyFe0
DwZSyJ2ml7poeD4mul7AKiWteZTRCnBnqMPFGMiWvw5LChZdmXRiNIfgfUoA2HCQ
Lnsin0EliGX0YQV5XTtEhQY2SMH+FZEJwfym/IQA9mnYNqOGRhVpLfTdW2Z9Zs5c
OjU5uxfbEiaMDJ66eT39/kTSL+TEWSFnRIaSeibsi2w9rF5WTCXf0Ojv7iSbfrCB
Lajrhy+MvGlbxaloJeFDLczaS/BJSbQWefCb2xugjIYP8h2k/JTHlnHEwrU9zUfx
YQ8hMsTi4PpJVmJX3WY4zQOStw8oP58zCx+PV3kyZwJjOoAjHn4=
=PTH1
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-01-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
. Replace system_wq with system_percpu_wq in the Exynos HDMI driver.
system_wq is effectively a per-cpu workqueue, but its name does not make
this explicit. Recent workqueue changes introduced system_percpu_wq to clarify
semantics and support ongoing workqueue API refactoring.
-----BEGIN PGP SIGNATURE-----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=0Sg+
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One code cleanup
. Replace system_wq with system_percpu_wq in the Exynos HDMI driver.
system_wq is effectively a per-cpu workqueue, but its name does not make
this explicit. Recent workqueue changes introduced system_percpu_wq to clarify
semantics and support ongoing workqueue API refactoring.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260107091154.27436-1-inki.dae@samsung.com
The driver only supports AArch64 page tables where OAS == IAS.
Remove the extra IAS tracking for AArch32 as this feature was
never implemented and that was creating BAD_STEs for SMMUv3
with stage-2 and OAS < 40.
Further discussion on this in:
https://lore.kernel.org/linux-iommu/20251130194506.593700-1-smostafa@google.com/
Reported-by: Tomasz Nowicki <tnowicki@google.com>
Fixes: f0c453dbcc ("iommu/arm-smmu: Ensure IAS is set correctly for AArch32-capable SMMUs")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Document the ISH firmware filename matching rules, including the
new PRODUCT_FAMILY-based patterns and their search order.
This aligns the documentation with the driver behavior and provides
clear guidance for vendors supplying custom ISH firmware.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for firmware filenames that include the CRC32 checksum of the
DMI product_family field. Several OEMs ship ISH firmware variants shared
across a product family while product_name or product_sku may differ. This
intermediate matching granularity reduces duplication and improves firmware
selection for vendor-customized platforms.
The newly supported filename forms are checked before existing patterns:
ish_${gen}_${vendor}_${family}_${name}_${sku}.bin
ish_${gen}_${vendor}_${family}_${sku}.bin
ish_${gen}_${vendor}_${family}_${name}.bin
ish_${gen}_${vendor}_${family}.bin
The legacy product_name/product_sku rules remain unchanged and continue
to provide fallback matching.
ISH_FW_FILENAME_LEN_MAX is changed to 72 to accommodate the product_family.
Tested with X9 series and X1 series.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Richie Roy Jayme <rjayme.jp@gmail.com>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Send POWER_SLEEP command to touch device when system enters into sleep
mode or hibernate mode to save more power; and send POWER_ON command to
take device back when system exits sleep mode.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for HID output reports in the intel-quicki2c driver by
implementing the output_report callback in the HID low-level driver
interface.
This enables proper communication with HID devices that require
output report functionality, such as setting device configuration or
updating device firmware.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are two output formats requested in the HID-over-I2C specification:
- Command format (set feature/set report): encoded command written to
command register, followed by data written to data register
- Output report format: all data written directly to output register
Current quicki2c_init_write_buf() implementation only supports the
command format.
Extend quicki2c_init_write_buf() to automatically detect the output
format based on the presence of command parameters and prepare the
appropriate output buffer accordingly.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace memcpy operations with put_unaligned_le16() when writing 16-bit
little-endian values to the write buffer.
This change improves code clarity and ensures proper handling of unaligned
memory access.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert all length-related variables in the QuickI2C protocol layer to use
size_t type to follow kernel coding conventions.
This includes:
- All buffer length parameters and variables
- Return values of quicki2c_encode_cmd() function which represents
encoded command buffer size.
- Return values of quicki2c_init_write_buf() function which represents
process result: either prepared output buffer size or error code.
This change improves type consistency and aligns with standard kernel
practices for memory size representation, reducing potential issues
with size calculations and comparisons.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions.
sysfs_emit() and sysfs_emit_at() are preferred to format sysfs output
as they provide better bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251220223026.125678-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Extend KVM's restriction on CPUID and feature MSR changes to disallow
updates while L2 is active in addition to rejecting updates after the vCPU
has run at least once. Like post-run vCPU model updates, attempting to
react to model changes while L2 is active is practically infeasible, e.g.
KVM would need to do _something_ in response to impossible situations where
userspace has a removed a feature that was consumed as parted of nested
VM-Enter.
In practice, disallowing vCPU model changes while L2 is active is largely
uninteresting, as the only way for L2 to be active without the vCPU having
run at least once is if userspace stuffed state via KVM_SET_NESTED_STATE.
And because KVM_SET_NESTED_STATE can't put the vCPU into L2 without
userspace first defining the vCPU model, e.g. to enable SVM/VMX, modifying
the vCPU model while L2 is active would require deliberately setting the
vCPU model, then loading nested state, and then changing the model. I.e.
no sane VMM should run afoul of the new restriction, and any VMM that does
encounter problems has likely been running a broken setup for a long time.
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Kevin Cheng <chengkev@google.com>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230205641.4092235-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add option to enable slow workload type hints. User can specify
"slow" as the command line argument to enable slow workload type hints.
There are two slow workload type hints: "power" and "performance".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251218222559.4110027-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On processors starting from Panther Lake, additional workload type hints
are provided.
The hardware analyzes workload residencies over an extended period to
determine whether the workload classification tends toward idle/battery
life states or sustained/performance states. Based on this long-term
analysis, it classifies:
Power Classification: If the workload exhibits more idle or battery
life residencies, it is classified as "power". This is indicated by
setting bit 4 of the current workload type.
Performance Classification: If the workload exhibits more sustained
or performance residencies, it is classified as "performance". This
is indicated by clearing bit 4 of the current workload type.
This approach enables applications to ignore short-term workload
fluctuations and instead respond to longer-term power vs. performance
trends. Hints of this type are called slow workload hints.
To get notifications for slow workload hints, bit 22 in the thermal
mailbox can be used for configuring workload interrupts. It is possible
to exclusively enable slow workload hints or enable them in addition to
the current workload hints.
To enable slow workload hints, a new sysfs attribute is added to the
existing workload hint attributes:
workload_slow_hint_enable (RW): Write 1 to enable, 0 to disable.
Reading this attribute shows the current state.
This attribute is not present on any previous generation of processors.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Dropped redundant local variables, changelog edits ]
Link: https://patch.msgid.link/20251218222559.4110027-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace strlen() with the safer strnlen() and calculate the length of
the thermal zone name 'type' only once.
No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject edits ]
Link: https://patch.msgid.link/20251216130943.40180-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If sbi_ecall.c's functions are traceable,
echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter
may get the kernel into a deadlock.
(Functions in sbi_ecall.c are excluded from tracing if
CONFIG_RISCV_ALTERNATIVE_EARLY is set.)
__sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code
raises an IPI interrupt, which results in another call to __sbi_ecall
and another snapshot...
All it takes to get into this endless loop is one initial __sbi_ecall.
On RISC-V systems without SSTC extension, the clock events in
timer-riscv.c issue periodic sbi ecalls, making the problem easy to
trigger.
Always exclude the sbi_ecall.c functions from tracing to fix the
potential deadlock.
sbi ecalls can easiliy be logged via trace events, excluding ecall
functions from function tracing is not a big limitation.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://patch.msgid.link/20251223135043.1336524-1-martin@kaiser.cx
Signed-off-by: Paul Walmsley <pjw@kernel.org>
SPARC T5-2 dts describes some PCI BARs as 64-bit resources without the
pref(etchable) bit (0x83... vs 0xc3... in assigned-addresses) for address
ranges above the 4G threshold. Such resources cannot be placed into a
non-prefetchable PCI bridge window that is capable only of 32-bit
addressing. As such, it looks like the platform is improperly described by
the dts.
The kernel detects this problem (see the IORESOURCE_PREFETCH check in
pci_find_parent_resource()) and fails to assign these BAR resources to the
resource tree due to lack of a compatible bridge window.
Prior to 754babaaf3 ("sparc/PCI: Remove pcibios_enable_device() as they
do nothing extra") SPARC arch code did not test whether device resources
were successfully in the resource tree when enabling a device, effectively
hiding the problem. After removing the arch-specific enable code,
pci_enable_resources() refuses to enable the device when it finds not all
mem resources are assigned, and therefore mpt3sas can't be enabled:
pci 0001:04:00.0: reg 0x14: [mem 0x801110000000-0x80111000ffff 64bit]
pci 0001:04:00.0: reg 0x1c: [mem 0x801110040000-0x80111007ffff 64bit]
pci 0001:04:00.0: BAR 1 [mem 0x801110000000-0x80111000ffff 64bit]: can't claim; no compatible bridge window
pci 0001:04:00.0: BAR 3 [mem 0x801110040000-0x80111007ffff 64bit]: can't claim; no compatible bridge window
mpt3sas 0001:04:00.0: BAR 1 [mem size 0x00010000 64bit]: not assigned; can't enable device
For clarity, this filtered log only shows failures for one mpt3sas device
but other devices fail similarly. In the reported case, the end result with
all the failures is an unbootable system.
Things appeared to "work" before 754babaaf3 ("sparc/PCI: Remove
pcibios_enable_device() as they do nothing extra") because the resource
tree is agnostic to whether PCI BAR resources are properly in the tree or
not. So as long as there was a parent resource (e.g. a root bus resource)
that contains the address range, the resource tree code just places
resource request underneath it without any consideration to the
intermediate BAR resource. While it worked, it's incorrect setup still.
Add an OF fixup to set the IORESOURCE_PREFETCH flag for a 64-bit PCI
resource that has the end address above 4G requiring placement into the
prefetchable window. Also log the issue.
Fixes: 754babaaf3 ("sparc/PCI: Remove pcibios_enable_device() as they do nothing extra")
Reported-by: Nathaniel Roach <nroach44@gmail.com>
Closes: https://github.com/sparclinux/issues/issues/22
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nathaniel Roach <nroach44@gmail.com>
Link: https://patch.msgid.link/20251124170411.3709-1-ilpo.jarvinen@linux.intel.com
Add validation for C-states specified via the "table=" module parameter.
Treat this module parameter as untrusted input and validate it thoroughly.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20251216080402.156988-4-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new module parameter that allows adjusting the C-states table used by
the driver.
Currently, the C-states table is hardcoded in the driver based on the CPU
model. The goal is to have good enough defaults for most users.
However, C-state characteristics, such as exit latency and residency, can
vary between different variants of the same CPU model and BIOS settings.
Moreover, different platform usage models and user preferences may benefit
from different C-state target_residency values.
Provide a way for users to adjust the C-states table via a module parameter
"table". The general format is:
"state1:latency1:target_residency1,state2:latency2:target_residency2,..."
In other words, represent each C-state by its name, exit latency (in
microseconds), and target residency (in microseconds), separated by colons.
Separate multiple C-states by commas.
For example, suppose a CPU has 3 C-states with the following
characteristics:
C1: exit_latency=1, target_residency=2
C1E: exit_latency=10, target_residency=10
C6: exit_latency=100, target_residency=500
Users can specify a custom C-states table as follows:
1. intel_idle.table="C1:2:2,C1E:5:20,C6:150:600"
Result: C1: exit_latency=2, target_residency=2
C1E: exit_latency=5, target_residency=20
C6: exit_latency=150, target_residency=600
2. intel_idle.table="C6::400"
Result: C1: exit_latency=1, target_residency=2 (unchanged)
C1E: exit_latency=10, target_residency=10 (unchanged)
C6: exit_latency=100, target_residency=400
(only target_residency changed)
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20251216080402.156988-3-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reorder initialization calls to initialize the internal driver data before
sysfs:
Was:
intel_idle_sysfs_init();
intel_idle_cpuidle_driver_init();
Now:
intel_idle_cpuidle_driver_init();
intel_idle_sysfs_init();
Follow the general principle that drivers should initialize internal state
before registering external interfaces like sysfs, avoiding potential usage
before full initialization.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20251216080402.156988-2-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The arch/riscv/include/asm/bitops.h does not functionally require
including /linux/irqflags.h. Additionally, adding
arch/riscv/include/asm/percpu.h causes a circular inclusion:
kernel/bounds.c
->include/linux/log2.h
->include/linux/bitops.h
->arch/riscv/include/asm/bitops.h
->include/linux/irqflags.h
->include/linux/find.h
->return val ? __ffs(val) : size;
->arch/riscv/include/asm/bitops.h
The compilation log is as follows:
CC kernel/bounds.s
In file included from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/riscv/include/asm/processor.h:55,
from ./arch/riscv/include/asm/thread_info.h:42,
from ./include/linux/thread_info.h:60,
from ./include/asm-generic/preempt.h:5,
from ./arch/riscv/include/generated/asm/preempt.h:1,
from ./include/linux/preempt.h:79,
from ./arch/riscv/include/asm/percpu.h:8,
from ./include/linux/irqflags.h:19,
from ./arch/riscv/include/asm/bitops.h:14,
from ./include/linux/bitops.h:68,
from ./include/linux/log2.h:12,
from kernel/bounds.c:13:
./include/linux/find.h: In function 'find_next_bit':
./include/linux/find.h:66:30: error: implicit declaration of function '__ffs' [-Wimplicit-function-declaration]
66 | return val ? __ffs(val) : size;
| ^~~~~
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Link: https://patch.msgid.link/20251216014721.42262-2-cuiyunhui@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
There is no indication in the history that such an option was merged to
mainline.
Fixes: c637693b20 ("ubsan: remove UBSAN_MISC in favor of individual options")
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Link: https://patch.msgid.link/20260107114833.2030995-1-stefan.wiehler@nokia.com
Signed-off-by: Kees Cook <kees@kernel.org>
Remove the 'preferred_cstates' module parameter as it is not really useful.
The parameter currently only affects Alder Lake, where it controls C1/C1E
preference, with C1E being the default. The parameter does not support any
other platform. For example, Meteor Lake has a similar C1/C1E limitation,
but the parameter does not support Meteor Lake. This indicates that the
parameter is not very useful.
Generally, independent C1 and C1E are important for server platforms where
low latency is key. However, they are not as important for client platforms,
like Alder Lake, where C1E providing better energy savings is generally
preferred.
The parameter was originally introduced for Sapphire Rapids Xeon:
da0e58c038 intel_idle: add 'preferred_cstates' module argument
Later it was added to Alder Lake:
d1cf8bbfed ("intel_idle: Add AlderLake support")
But it was removed from Sapphire Rapids when firmware fixed the C1/C1E
limitation:
1548fac47a ("intel_idle: make SPR C1 and C1E be independent")
So Alder Lake is the only platform left where this parameter has any effect.
Remove this parameter to simplify the driver and reduce maintenance burden.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20251215111300.132803-1-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The INTEL_IDLE_VERSION constant has not been updated since 2020 and serves
no useful purpose. The driver version is implicitly defined by the kernel
version, making this constant redundant.
Remove the constant to eliminate potential confusion about version
tracking.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20251215111229.132705-1-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The driver uses devm_kzalloc() for device allocation, making the
pci_set_drvdata(pdev, NULL) call in the remove path unnecessary.
The driver core clears drvdata automatically during device removal.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject rewrite ]
Link: https://patch.msgid.link/20251215091352.1250531-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The print in sbi_cpu_stop() assumes smp_processor_id() returns an
unsigned int, when it is actually an int. Fix the format string to
avoid mismatch type warnings in rht pr_crit().
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260102145839.657864-1-ben.dooks@codethink.co.uk
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Fixes to miscellaneous problems in cpupower tool:
- idle_monitor: fix incorrect value logged after stop
- Fix inverted APERF capability check
- Use strcspn() to strip trailing newline
- Reset errno before strtoull()
- Show C0 in idle-info dump
-----BEGIN PGP SIGNATURE-----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=cmPm
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull a cpupower utility update for Linux 6.20-rc1 from Shuah Khan:
"Fixes to miscellaneous problems in cpupower tool:
- idle_monitor: fix incorrect value logged after stop
- Fix inverted APERF capability check
- Use strcspn() to strip trailing newline
- Reset errno before strtoull()
- Show C0 in idle-info dump"
* tag 'linux-cpupower-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools/power cpupower: Show C0 in idle-info dump
tools/power cpupower: Reset errno before strtoull()
tools/cpupower: Use strcspn() to strip trailing newline
tools/cpupower: Fix inverted APERF capability check
cpupower: idle_monitor: fix incorrect value logged after stop
The ftrace_dump_on_oops string is not used outside of trace.c so
make it static to avoid the export warning from sparse:
kernel/trace/trace.c:141:6: warning: symbol 'ftrace_dump_on_oops' was not declared. Should it be static?
Fixes: dd293df639 ("tracing: Move trace sysctls into trace.c")
Link: https://patch.msgid.link/20260106231054.84270-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A bug was reported about an infinite recursion caused by tracing the rcu
events with the kernel stack trace trigger enabled. The stack trace code
called back into RCU which then called the stack trace again.
Expand the ftrace recursion protection to add a set of bits to protect
events from recursion. Each bit represents the context that the event is
in (normal, softirq, interrupt and NMI).
Have the stack trace code use the interrupt context to protect against
recursion.
Note, the bug showed an issue in both the RCU code as well as the tracing
stacktrace code. This only handles the tracing stack trace side of the
bug. The RCU fix will be handled separately.
Link: https://lore.kernel.org/all/20260102122807.7025fc87@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260105203141.515cd49f@gandalf.local.home
Reported-by: Yao Kai <yaokai34@huawei.com>
Tested-by: Yao Kai <yaokai34@huawei.com>
Fixes: 5f5fa7ea89 ("rcu: Don't use negative nesting depth in __rcu_read_unlock()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The code has integrity checks to make sure that depth never goes below
zero. But the depth field has recently been converted to unsigned long
from "int" (for alignment reasons). As unsigned long can never be less
than zero, the integrity checks no longer work.
Convert depth to long from unsigned long to allow the integrity checks to
work again.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: pengdonglin <pengdonglin@xiaomi.com>
Link: https://patch.msgid.link/20260102143148.251c2e16@gandalf.local.home
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aS6kGi0maWBl-MjZ@stanley.mountain/
Fixes: f83ac7544f ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be freed, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer free as Commit
f6bd2c9248 ("ring-buffer: Avoid softlockup in ring_buffer_resize()")
does.
Detailed call trace as follow:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329
rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96)
CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE
pc : arch_local_irq_restore+0x8/0x20
arch_local_irq_restore+0x8/0x20 (P)
free_frozen_page_commit+0x28c/0x3b0
__free_frozen_pages+0x1c0/0x678
___free_pages+0xc0/0xe0
free_pages+0x3c/0x50
ring_buffer_resize.part.0+0x6a8/0x880
ring_buffer_resize+0x3c/0x58
__tracing_resize_ring_buffer.part.0+0x34/0xd8
tracing_resize_ring_buffer+0x8c/0xd0
tracing_entries_write+0x74/0xd8
vfs_write+0xcc/0x288
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
Cc: <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
soft_mode is not read in the enable case, so drop the assignment.
Drop also the comment text that refers to the assignment and realign
the comment.
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251226110531.4129794-1-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Drop 'CONFIG_I2C_COMPAT is not set' (removed in commit 7e722083fc
("i2c: Remove I2C_COMPAT config symbol and related code"))
- Drop 'CONFIG_SCHED_DEBUG is not set' (removed in commit b52173065e
("sched/debug: Remove CONFIG_SCHED_DEBUG"))
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://patch.msgid.link/20260107092425.24737-1-lukas.bulwahn@redhat.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Don't populate the read-only array non_mmio_desc on the stack at run
time, instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20251219215900.494211-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the separate declaration of 'resource_list' and subsequent
INIT_LIST_HEAD() call with LIST_HEAD(), which declares and initializes
the list head in one idiomatic step. This reduces code verbosity and
aligns with common kernel coding patterns, without functional change.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
[ rjw: Subject edits ]
Link: https://patch.msgid.link/20251209072757.3110467-1-pengcan@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If cmd_db_magic_matches() fails after memremap() succeeds, the function
returns -EINVAL without unmapping the memory region, causing a
potential resource leak.
Switch to devm_memremap to automatically manage the map resource.
Fixes: 312416d917 ("drivers: qcom: add command DB driver")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251216013933.773-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some compute SoCs support additional operation modes, extending the
existing set of USB3/safe/DP-alt-mode.
The firmware performs all the necessary handshakes for
us and there is no room for error on that level (i.e. the sequences
will match what happens on Windows).
The trade-off with that approach is that the received notifications
trim some of the PDO/EUDO data (particularly the cable/plug parts),
offering a set of similar-in-nature-but-not-the-same indicators.
In an attempt to remedy this, I reconstructed some of it, so that the
connected mux/retimer drivers can continue to behave as expected.
Add support for parsing the aforementioned data coming from PMIC_GLINK
and passing it on to the various Type-C components.
Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251027-topic-pg_altmode_usb4-v1-1-2931a3ecc146@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of open-coding the steps for extracting a null-terminated
string, use the newly available CStr::from_bytes_until_nul().
Suggested-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260106035226.48853-3-jhubbard@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The util.rs module contained a single helper function,
str_from_null_terminated(), which duplicated functionality that is now
available in core::ffi::CStr.
Specifically, CStr::from_bytes_until_nul() is available in the kernel's
minimum supported Rust version (1.78.0), so it time to stop using this
custom workaround.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260106035226.48853-2-jhubbard@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The K1 I2C controller provides a reset line that needs to be deasserted
before the controller can be accessed.
Add reset support to the driver to ensure the controller starts in the
required state.
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251230150653.42097-2-jyc0019@gmail.com
The I2C controller requires a reset to ensure it starts from a clean state.
Add the 'resets' property to support this hardware requirement.
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251230150653.42097-1-jyc0019@gmail.com
