Some arches (like x86) do not inline spin_unlock_irqrestore().
backlog_unlock_irq_restore() is in RPS/RFS critical path,
we prefer using spin_unlock() + local_irq_restore() for
optimal performance.
Also change backlog_unlock_irq_restore() second argument
to avoid a pointless dereference.
No difference in net/core/dev.o code size.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260105163054.13698-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We expect the SFP write accessors to return the number of written bytes.
We fail to do so for single-byte smbus accesses, which may cause errors
when setting a module's high-power state and for some cotsworks modules.
Let's return the amount of written bytes, as expected.
Fixes: 7662abf4db ("net: phy: sfp: Add support for SMBus module access")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add additional machines that requires communication to the SC firmware
to set the GPR bit required for stop mode support.
NXP i.MX8DX (fsl,imx8dx) is a low end version of i.MX8QXP (fsl,imx8qxp),
while NXP i.MX8QP (fsl,imx8qp) is a low end version of i.MX8QM
(fsl,imx8qm).
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105152452.84338-1-francesco@dolcini.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace rio_probe1() printk(KERN_INFO) messages with netdev_{info,dbg}().
Keep one netdev_info() line for device identification; move the rest to
netdev_dbg() to avoid spamming the kernel log.
Log rx_timeout on a separate line since netdev_*() prefixes each
message and the multi-line formatting looks broken otherwise.
No functional change intended.
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105130552.8721-2-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use DEFINE_RAW_FLEX() to avoid thousands of -Wflex-array-member-not-at-end
warnings.
Remove struct ip_options_data, and adjust the rest of the code so that
flexible-array member struct ip_options_rcu::opt.__data[] ends last
in struct icmp_bxm.
Compensate for this by using the DEFINE_RAW_FLEX() helper to define each
on-stack struct instance that contained struct ip_options_data as a member,
and to define struct ip_options_rcu with a fixed on-stack size for its
nested flexible-array member opt.__data[].
Also, add a couple of code comments to prevent people from adding members
to a struct after another member that contains a flexible array.
With these changes, fix 2600 warnings of the following type:
include/net/inet_sock.h:65:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aVteBadWA6AbTp7X@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
T99W760 is designed based on Qualcomm SDX35 chip. It use similar
architecture with SDX72/SDX75 chip. So we need to assign initial
link id for this device to make sure network available.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260105022646.10630-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test currently SKIPs if the symmetric RSS xfrm is not enabled
by default. This leads to spurious SKIPs in the Intel CI reporting
results to NIPA.
Testing on CX7:
# ./drivers/net/hw/rss_input_xfrm.py
TAP version 13
1..2
ok 1 rss_input_xfrm.test_rss_input_xfrm_ipv4 # SKIP Test requires IPv4 connectivity
# Sym input xfrm already enabled: {'sym-or-xor'}
ok 2 rss_input_xfrm.test_rss_input_xfrm_ipv6
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
# ethtool -X eth0 xfrm none
# ./drivers/net/hw/rss_input_xfrm.py
TAP version 13
1..2
ok 1 rss_input_xfrm.test_rss_input_xfrm_ipv4 # SKIP Test requires IPv4 connectivity
# Sym input xfrm configured: {'sym-or-xor'}
ok 2 rss_input_xfrm.test_rss_input_xfrm_ipv6
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://patch.msgid.link/20260104184600.795280-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 926eae6044, which
never could have produced the intended effect:
https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/
The reason why it is broken beyond repair in this form is that the
mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF
node of an external Ethernet PHY. This:
(a) does not work if there is no external PHY (chip-to-chip connection,
or SFP module)
(b) pollutes the OF property namespace / bindings of said external PHY
("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes
interface as well)
We can revisit the idea of making SerDes amplitude configurable once we
have proper bindings for the mv88e6xxx SerDes. Until then, remove the
code that leaves us with unnecessary baggage.
Fixes: 926eae6044 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable")
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 addresses with the same scope are returned in reverse insertion
order, unlike IPv4. For example, when adding a -> b -> c, the list is
reported as c -> b -> a, while IPv4 preserves the original order.
This behavior causes:
a. When using `ip -6 a save` and `ip -6 a restore`, addresses are restored
in the opposite order from which they were saved. See example below
showing addresses added as 1::1, 1::2, 1::3 but displayed and saved
in reverse order.
# ip -6 a a 1::1 dev x
# ip -6 a a 1::2 dev x
# ip -6 a a 1::3 dev x
# ip -6 a s dev x
2: x: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
# ip -6 a save > dump
# ip -6 a d 1::1 dev x
# ip -6 a d 1::2 dev x
# ip -6 a d 1::3 dev x
# ip a d ::1 dev lo
# ip a restore < dump
# ip -6 a s dev x
2: x: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
# ip a showdump < dump
if1:
inet6 ::1/128 scope host proto kernel_lo
valid_lft forever preferred_lft forever
if2:
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
if2:
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
if2:
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
b. Addresses in pasta to appear in reversed order compared to host
addresses.
The ipv6 addresses were added in reverse order by commit e55ffac601
("[IPV6]: order addresses by scope"), then it was changed by commit
502a2ffd73 ("ipv6: convert idev_list to list macros"), and restored by
commit b54c9b98bb ("ipv6: Preserve pervious behavior in
ipv6_link_dev_addr()."). However, this reverse ordering within the same
scope causes inconsistency with IPv4 and the issues described above.
This patch aligns IPv6 address ordering with IPv4 for consistency
by changing the comparison from >= to > when inserting addresses
into the address list. Also updates the ioam6 selftest to reflect
the new address ordering behavior. Combine these two changes into
one patch for bisectability.
Link: https://bugs.passt.top/show_bug.cgi?id=175
Suggested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Acked-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260104032357.38555-1-yuhuang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Raju Rangoju as an additional maintainer to support the AMD XGBE
network device driver.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20251211112831.1781030-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device.
Fixes: be91128c57 ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The HW only supports a maximum Rx buffer size of 16K-128. On systems
using large pages, the libeth logic can configure the buffer size to be
larger than this. The upper bound is PAGE_SIZE while the lower bound is
MTU rounded up to the nearest power of 2. For example, ARM systems with
a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K,
which will cause the config Rx queues message to fail.
Initialize the bufq/fill queue buf_len field to the maximum supported
size. This will trigger the libeth logic to cap the maximum Rx buffer
size by reducing the upper bound.
Fixes: 74d1412ac8 ("idpf: use libeth Rx buffer management for payload buffer")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: David Decotigny <ddecotig@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix error handling to properly cleanup interrupts when
idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to
'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up
before releasing other resources.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip>
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
RSS LUT provisioning and queries on a down interface currently return
silently without effect. Users should be able to configure RSS settings
even when the interface is down.
Fix by maintaining RSS configuration changes in the driver's soft copy and
deferring HW programming until the interface comes up.
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The RSS LUT is not initialized until the interface comes up, causing
the following NULL pointer crash when ethtool operations like rxhash on/off
are performed before the interface is brought up for the first time.
Move RSS LUT initialization from ndo_open to vport creation to ensure LUT
is always available. This enables RSS configuration via ethtool before
bringing the interface up. Simplify LUT management by maintaining all
changes in the driver's soft copy and programming zeros to the indirection
table when rxhash is disabled. Defer HW programming until the interface
comes up if it is down during rxhash and LUT configuration changes.
Steps to reproduce:
** Load idpf driver; interfaces will be created
modprobe idpf
** Before bringing the interfaces up, turn rxhash off
ethtool -K eth2 rxhash off
[89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000
[89408.371908] #PF: supervisor read access in kernel mode
[89408.371924] #PF: error_code(0x0000) - not-present page
[89408.371940] PGD 0 P4D 0
[89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[89408.372052] RIP: 0010:memcpy_orig+0x16/0x130
[89408.372310] Call Trace:
[89408.372317] <TASK>
[89408.372326] ? idpf_set_features+0xfc/0x180 [idpf]
[89408.372363] __netdev_update_features+0x295/0xde0
[89408.372384] ethnl_set_features+0x15e/0x460
[89408.372406] genl_family_rcv_msg_doit+0x11f/0x180
[89408.372429] genl_rcv_msg+0x1ad/0x2b0
[89408.372446] ? __pfx_ethnl_set_features+0x10/0x10
[89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10
[89408.372482] netlink_rcv_skb+0x58/0x100
[89408.372502] genl_rcv+0x2c/0x50
[89408.372516] netlink_unicast+0x289/0x3e0
[89408.372533] netlink_sendmsg+0x215/0x440
[89408.372551] __sys_sendto+0x234/0x240
[89408.372571] __x64_sys_sendto+0x28/0x30
[89408.372585] x64_sys_call+0x1909/0x1da0
[89408.372604] do_syscall_64+0x7a/0xfa0
[89408.373140] ? clear_bhb_loop+0x60/0xb0
[89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[89408.378887] </TASK>
<snip>
Fixes: a251eee621 ("idpf: add SRIOV support and other ndo_ops")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When ethtool -n is executed on an interface to display the flow steering
rules, "rxclass: Unknown flow type" error is generated.
The flow steering list maintained in the driver currently stores only the
location and q_index but other fields of the ethtool_rx_flow_spec are not
stored. This may be enough for the virtchnl command to delete the entry.
However, when the ethtool -n command is used to query the flow steering
rules, the ethtool_rx_flow_spec returned is not complete causing the
error below.
Resolve this by storing the flow spec (fsp) when rules are added and
returning the complete flow spec when rules are queried.
Also, change the return value from EINVAL to ENOENT when flow steering
entry is not found during query by location or when deleting an entry.
Add logic to detect and reject duplicate filter entries at the same
location and change logic to perform upfront validation of all error
conditions before adding flow rules through virtchnl. This avoids the
need for additional virtchnl delete messages when subsequent operations
fail, which was missing in the original upstream code.
Example:
Before the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
rxclass: Unknown flow type
rxclass: Unknown flow type
After the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
Filter: 0
Rule Type: TCP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Filter: 1
Rule Type: UDP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Fixes: ada3e24b84 ("idpf: add flow steering support")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Co-developed-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads.
Fixes: ada3e24b84 ("idpf: add flow steering support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:
[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated
[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)
[40958.148190] idpf 0000:83:00.0: HW reset detected
[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8
...
[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf]
[40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]
...
[40958.177932] Call Trace:
[40958.178491] <TASK>
[40958.179040] process_one_work+0x226/0x6d0
[40958.179609] worker_thread+0x19e/0x340
[40958.180158] ? __pfx_worker_thread+0x10/0x10
[40958.180702] kthread+0x10f/0x250
[40958.181238] ? __pfx_kthread+0x10/0x10
[40958.181774] ret_from_fork+0x251/0x2b0
[40958.182307] ? __pfx_kthread+0x10/0x10
[40958.182834] ret_from_fork_asm+0x1a/0x30
[40958.183370] </TASK>
Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset.
Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Reported-by: Vivek Kumar <iamvivekkumar@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff
Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If evsel__new_idx() returns NULL, the function currently jumps to label
'out_err'. Here, references to `cpus` and `pmu_cpus` are dropped.
Also, resources held by evsel->name and evsel->metric_id are freed.
But if evsel__new_idx() returns NULL, it can lead to NULL pointer
dereference.
Fixes: cd63c22168 ("perf parse-events: Minor __add_event refactoring")
Signed-off-by: Faisal Bukhari <faisalbukhari523@gmail.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Adjust some oddly indented fprintf() calls.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The safety requirements for `Pin::into_inner_unchecked` state that the
returned pointer must be treated as pinned until it is dropped. Such a
guarantee is provided by the `ARef` type. This patch improves the safety
comment to better reflect this.
Signed-off-by: Ewan Chorynski <ewan.chorynski@ik.me>
Link: https://patch.msgid.link/20251228-drm-gem-safety-comment-v2-1-99bb861c3371@ik.me
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On X86 AMD systems, mitigations=off also disables the Transient
Scheduler Attacks (TSA) mitigation. Add it to the list.
Signed-off-by: Yu Liao <liaoyu.ly@bytedance.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251225121438.38427-1-liaoyu.ly@bytedance.com>
Fix a broken line break in the word "architecture" in the spufs
documentation.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251225161615.3107808-1-weibu@redadmin.org>
'even codes' should be 'event codes' at the end of input.rst
Signed-off-by: Wu Canhong <canhong12@163.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251226160219.64818-1-canhong12@163.com>
Two fields in struct p2pdma_provider were not documented, which resulted
in the following kernel-doc warning:
Warning: include/linux/pci-p2pdma.h:26 struct member 'owner' not described in 'p2pdma_provider'
Warning: include/linux/pci-p2pdma.h:26 struct member 'bus_offset' not described in 'p2pdma_provider'
Repro:
$ scripts/kernel-doc -none include/linux/pci-p2pdma.h
Fixes: f58ef9d1d1 ("PCI/P2PDMA: Separate the mmap() support from the core logic")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://lore.kernel.org/all/20260102234033.GA246107@bhelgaas
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20260104-fix-p2p-kdoc-v1-1-6d181233f8bc@nvidia.com
Sphinx report kernel-doc warnings:
WARNING: ./fs/namei.c:2853 function parameter 'state' not described in '__start_dirop'
WARNING: ./fs/namei.c:2853 expecting prototype for start_dirop(). Prototype was for __start_dirop() instead
Fix them up.
Fixes: ff7c4ea11a ("VFS: add start_creating_killable() and start_removing_killable()")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20251219024620.22880-3-bagasdotme@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Sphinx reports kernel-doc warning:
WARNING: ./fs/inode.c:1607 function parameter 'isnew' not described in 'ilookup5_nowait'
Describe the parameter.
Fixes: a27628f436 ("fs: rework I_NEW handling to operate without fences")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20251219024620.22880-2-bagasdotme@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Non distro builds now require a new version of libbfd, so skip the test
if the library is too old.
The grep test isn't a strong as the feature test in
test-libbfd-threadsafe.c, but there seems to be precedent for feature
testing this way here and it's good enough for the build-test rule. If
the function exists but returns an error it will be picked up by the
feature test when attempting the build.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The non-distro build requires libbfd 2.42 since commit b72b8132d8
("perf libbfd: Ensure libbfd is initialized prior to use"). Add a
feature test so that it's obvious why the build fails if this criteria
isn't met.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
HAVE_LIBBFD_BUILDID_SUPPORT isn't used in the codebase so remove the
feature test that sets it.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit 243fea1346 ("NFSv4.2: fix listxattr to return selinux
security label") introduced a direct call to
security_inode_listsecurity() in nfs4_listxattr(). However,
nfs4_listxattr() already indirectly called
security_inode_listsecurity() via nfs4_listxattr_nfs4_label() if
CONFIG_NFS_V4_SECURITY_LABEL is enabled and the server has the
NFS_CAP_SECURITY_LABEL capability enabled. This duplication was fixed
by commit 9acb237def ("NFSv4.2: another fix for listxattr") by
making the second call conditional on NFS_CAP_SECURITY_LABEL not being
set by the server. However, the combination of the two changes
effectively makes one call to security_inode_listsecurity() in every
case - which is the desired behavior since getxattr() always returns a
security xattr even if it has to synthesize one. Further, the two
different calls produce different xattr name ordering between
security.* and user.* xattr names. Unify the two separate calls into a
single call and get rid of nfs4_listxattr_nfs4_label() altogether.
Link: https://lore.kernel.org/selinux/CAEjxPJ6e8z__=MP5NfdUxkOMQ=EnUFSjWFofP4YPwHqK=Ki5nw@mail.gmail.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
None of the if statements or variable assignments in the non-distro
block actually affect the feature checks. Just do them all in one place
so the flow isn't obscured.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert internal cross-references in "Putting Your Stuff in the kernel"
section from inline code to internal links.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251223035254.22894-4-bagasdotme@gmail.com>
Do not italicize EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL() references in
EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() subsections.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251223035254.22894-3-bagasdotme@gmail.com>
We originally protected PIDFD_GET_<ns-type>_NAMESPACE ioctls() through
ifdefs and recent rework made it possible to drop them. There was an
oversight though. When the relevant namespace is turned off ns->ops will
be NULL so even though opening a file descriptor is perfectly legitimate
it would fail during inode eviction when the file was closed.
The simple fix would be to check ns->ops for NULL and continue allow to
retrieve namespace fds from pidfds but we don't allow retrieving them
when the relevant namespace type is turned off. So keep the
simplification but add the ifdefs back in.
Link: https://lore.kernel.org/20251222214907.GA189632@quark
Link: https://patch.msgid.link/20251224-ununterbrochen-gagen-ea949b83f8f2@brauner
Fixes: a71e4f103a ("pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls")
Tested-by: Brendan Jackman <jackmanb@kernel.org>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As the building mechanism is now able to retry detection with different
combinations of linking flags, setting FEATURE_CHECK_LDFLAGS-disassembler-four-args
and FEATURE_CHECK_LDFLAGS-disassembler-init-styled is not necessary anymore,
so remove it.
James Clark notes:
Use the same technique to find the set of bfd-related libraries to link as in:
3308ffc5016e6136 ("tools, build: Retry detection of bfd-related features")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The condition logic will become a bit more complicated.
Split them out into dedicated variables so they stay readable.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251223-uapi-nostdinc-v1-4-d91545d794f7@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
