This patch introduces a per-directory version counter that increments on
each directory modification (indx_insert_entry() / indx_delete_entry()).
ntfs_readdir() uses this version to detect whether the directory has
changed since enumeration began. If readdir() reaches end-of-directory
but the version has changed, the walk restarts from the beginning of the
index tree instead of returning prematurely. This provides rmdir-like
behavior for tools that remove entries as they enumerate them.
Prior to this change, bonnie++ directory operations could fail due to
premature termination of readdir() during concurrent index updates.
With this patch applied, bonnie++ completes successfully with no errors.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Previously sequential reads operations relied solely on single-page reads,
causing the block layer to perform many synchronous I/O requests,
especially for large volumes or large directories. This patch introduces
explicit readahead via page_cache_sync_readahead() and file_ra_state to
reduce I/O latency and improve sequential throughput.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The old "readpage" naming is still used in ni_readpage_cmpr(), even though
the vfs has transitioned to the folio-based read_folio() API.
This patch performs a straightforward renaming of the helper:
ni_readpage_cmpr() -> ni_read_folio_cmpr().
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
KMSAN reports an uninitialized value in longest_match_std(), invoked
from ntfs_compress_write(). When new folios are allocated without being
marked uptodate and ni_read_frame() is skipped because the caller expects
the frame to be completely overwritten, some reserved folios may remain
only partially filled, leaving the rest memory uninitialized.
Fixes: 584f60ba22 ("ntfs3: Convert ntfs_get_frame_pages() to use a folio")
Tested-by: syzbot+08d8956768c96a2c52cf@syzkaller.appspotmail.com
Reported-by: syzbot+08d8956768c96a2c52cf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=08d8956768c96a2c52cf
Signed-off-by: Bartlomiej Kubik <kubik.bartlomiej@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.
This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
A new step has been added to Bspec with respect to the C10 PHY, which
instructs the driver to toggle powerdown value for boths PHY lanes to P0
and then P2 when driving an HDMI connector. This update in the Bspec
reflects the changes required by Wa_14026084006, so document it.
Note that, unlike other display workarounds, this one is actually tied
to the C10 PHY and not to a specific display IP. As such, let's just
document it in intel_cx0_phy.c instead of adding it to
intel_display_wa.c.
Bspec: 64568, 74489
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-2-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
We do not use the function intel_cx0_powerdown_change_sequence()
exclusively to take the PHY out of reset, hence the warning message on
failure is misleading. Furthermore, in an upcoming change, we will also
use that function to implement a new C10 PHY workaround.
Use a more accurate message by saying that we failed to change the
powerdown state.
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-1-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The dfl code adds a bus. If it is built-in and there is a built-in driver
as well, the dfl module_init may be called after the driver module_init,
leading to a failure to register the driver as the bus has not been added
yet.
Use subsys_initcall, which guarantees it will be called before the drivers
init code.
Without the fix, we see failures like this:
[ 0.479475] Driver 'intel-m10-bmc' was unable to register with bus_type 'dfl' because the bus was not initialized.
Cc: stable@vger.kernel.org
Fixes: 9ba3a0aa09 ("fpga: dfl: create a dfl bus type to support DFL devices")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20251215-dfl_subsys-v1-1-21807bad6b10@igalia.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
When parsing the region bridge list from the "fpga-bridges" device tree
property, the of-fpga-region driver will silently ignore bridges which fail
to be obtained, for example due to a missing bridge driver or invalid
phandle.
This can lead to hardware issues if a region bridge stays coupled when
partial programming is performed.
Fail if any of the bridges specified in "fpga-bridges" cannot be obtained.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20251127-of-fpga-region-fail-if-bridges-not-found-v1-1-ca674f8d07eb@bootlin.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Replace sprintf() calls with sysfs_emit() to follow current kernel
coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Link: https://patch.msgid.link/20251214083659.2412218-1-madhurkumar004@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo adjusted commit message while pushing it]
It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add missing target for mt8395-radxa hd panel overlay.
Fixes: 4c8ff61199 ("arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251205215940.19287-1-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays for Bananapi R4 (pro) variants.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/20251119175124.48947-3-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Since commit eb972eab07 ("lkdtm/bugs: Add cases for BUG and PANIC
occurring in hardirq context"), building with clang for x86_64 results
in the following warnings:
vmlinux.o: warning: objtool: lkdtm_PANIC_IN_HARDIRQ(): unexpected end of section .text.lkdtm_PANIC_IN_HARDIRQ
vmlinux.o: warning: objtool: lkdtm_BUG_IN_HARDIRQ(): unexpected end of section .text.lkdtm_BUG_IN_HARDIRQ
caused by busy "while (wait_for_...);" loops. Add READ_ONCE() and
cpu_relax() to better indicate the intention and avoid any unwanted
compiler optimisations.
Fixes: eb972eab07 ("lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190111.jxFSqxUH-lkp@intel.com/
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is no reason to accept an invalid minimum/maximum DSC source input
BPP value (i.e a minimum DSC input BPP value above the maximum pipe BPP
or a maximum DSC input BPP value below the minimum pipe BPP value), fail
the state computation in these cases.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-17-imre.deak@intel.com
There is no reason to accept an invalid maximum sink compressed BPP
value (i.e. 0), fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-16-imre.deak@intel.com
There is no reason to accept a minimum/maximum link BPP value above the
maximum throughput BPP value, fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-15-imre.deak@intel.com
Make sure that state computation fails if the minimum/maximum link BPP
values got invalid as a result of limiting both of these values
separately to the corresponding source/sink capability limits.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-14-imre.deak@intel.com
The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).
This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-13-imre.deak@intel.com
A DSC compressed stream requires FEC (except for eDP), which has a BW
overhead on non-UHBR links that must be accounted for explicitly. Do
that during computing the required BW.
Note that the overhead doesn't need to be accounted for on UHBR links
where FEC is always enabled and so the corresponding overhead is part of
the channel coding efficiency instead (i.e. the overhead is part of the
available vs. the required BW).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-12-imre.deak@intel.com
On MST links the symbol alignment and SSC have a BW overhead, which
should be accounted for when calculating the required stream BW, do so
during mode validation for an uncompressed stream.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-11-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
compressed streams on non-UHBR DP-SST links. This ensures that the BW is
calculated the same way for all DP output types and DSC/non-DSC modes,
during mode validation as well as during state computation.
This approach also allows for accounting with BW overhead due to DSC,
FEC being enabled on a link. Acounting for these will be added by
follow-up changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-10-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.
This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-9-imre.deak@intel.com
is_bw_sufficient_for_dsc_config() should return true if the required BW
equals the available BW, make it so.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-8-imre.deak@intel.com
Factor out intel_dp_link_bw_overhead(), used later for BW calculation
during DP SST mode validation and state computation.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-7-imre.deak@intel.com
The encoder state computation should use the
drm_display_mode::crtc_clock member, instead of the clock member, the
former one possibly having a necessary adjustment wrt. to the latter
due to driver specific constraints. In practice the two values should
not differ at spots changed in this patch, since only MSO and 3D modes
would make them different, neither MSO or 3D relevant here, but still
use the expected crtc_clock version for consistency.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-6-imre.deak@intel.com
Convert intel_dp_output_bpp() and intel_dp_mode_min_output_bpp() to
return an x16 fixed point bpp value, as this value will be always the
link BPP (either compressed or uncompressed) tracked in the same x16
fixed point format.
While at it rename
intel_dp_output_bpp() to intel_dp_output_format_link_bpp_x16() and
intel_dp_mode_min_output_bpp() to intel_dp_mode_min_link_bpp_x16() to
better reflect that these functions return an x16 link BPP value
specific to a particular output format or mode.
Also rename intel_dp_output_bpp()'s bpp parameter to pipe_bpp, to
clarify which kind of (pipe vs. link) BPP the parameter is.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-5-imre.deak@intel.com
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count, fix
intel_dp_dsc_get_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-4-imre.deak@intel.com
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
Define the SpacemiT P1 PMIC voltage regulators and their constraints.
The power management hardware design on the Milk-V Jupiter is identical to
the Banana Pi BPI-F3, so the DT Nodes were taken from k1-bananapi-f3.dts.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251206134532.1741648-4-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Define the DC power input and the 4v power as fixed regulator supplies.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251206134532.1741648-3-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The adapter is used to access the SpacemiT P1 PMIC present in this board.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251206134532.1741648-2-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The original link returns a 404, so I update it to the latest
accessible url.
No functional change to any code, only documentation updates.
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Link: https://patch.msgid.link/20251217061737.6079-1-zhangcoder@yeah.net
Signed-off-by: Jan Kara <jack@suse.cz>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two commits add support for 6 amps with feedback, primarily for
the CDB35L56-EIGHT-C and CDB35L63-CB8 and similar hardware.
Merge series from Alexander Stein <alexander.stein@ew.tq-group.com>:
this series fixes the error regarding duplicate debugfs directory creation on
TQMa8MPxL (imx8mp) when easrc is enabled:
debugfs: '30c90000.easrc' already exists in 'tqm-tlv320aic32'
This is caused because fsl_easrc adds two components which use the device name
as component name. Debugfs directories for each component is created, resulting
on name conflict. Fix this by adding the debugfs_prefix for both component
drivers.
Before:
$ ls /sys/kernel/debug/asoc/tqm-tlv320aic32/
30c30000.sai 30c90000.easrc HiFi-ASRC-FE dapm dapm_pop_time
dma:30c30000.sai tlv320aic32x4.1-0018
After:
$ ls /sys/kernel/debug/asoc/tqm-tlv320aic32/
30c30000.sai HiFi-ASRC-FE asrc:30c90000.easrc dapm dapm_pop_time
dma:30c30000.sai easrc:30c90000.easrc tlv320aic32x4.1-0018
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
We support bytes control type for set and get, but these are module specific
controls and there is no way to handle notifications from them in a generic way.
Each control have module specific param_id and this param_id is only valid in
the module's scope, other modules might use the same id for different functions
for example.
This series will add a new generic control type, similar to the existing ones
for ENUM and SWITCH, which can be used to create bytes controls which can send
notifications from firmware on change.
The new param_id is 202 and the sof_ipc4_control_msg_payload is updated to
describe bytes payload also.
On set, the payload must include the sof_ipc4_control_msg_payload struct with
the control's ID and data size, followed by the data.
On get, the kernel needs to send the sof_ipc4_control_msg_payload struct along
with the LARGE_CONFIG_GET message as payload with the ID of the control that
needs to be retrieved. The raw data is received back without additional header.
A notification might contain data, in this case the num_elems reflects the size
in bytes, or without data. If no data is received then the control is marked as
dirty and on read the kernel will refresh the data from firmware.
The series includes mandatory fixes for existing code and adds support for
sending payload with LARGE_CONFIG_GET when the param_id is either generic ENUM,
SWITCH or BYTES control.
On 32‑bit systems, phys_addr_t is defined as u32. However, parisc
expects physical addresses to be 64‑bit values so it can store a
validity bit in the upper byte.
Resolve this mismatch by casting the physical address to unsigned
long, ensuring it is treated as a 64‑bit value where required. This
fixes the failure to start block device drivers on the C3700
platform, as reported by Guenter.
QEMU command line to reproduce the issue (with Debian SID as rootfs):
qemu-system-hppa -machine C3700 \
-kernel arch/parisc/boot/bzImage \
-append "console=ttyS0 \
root=/dev/sda rw rootwait panic=-1" \
-nographic \
-device lsi53c895a \
-drive file=rootfs-hppa.img,if=none,format=raw,id=hd0 \
-device scsi-hd,drive=hd0
Fixes: 96ddf2ef58 ("parisc: Convert DMA map_page to map_phys interface")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/b184f1bf-96dc-4546-8512-9cba5ecb58f7@roeck-us.net/
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[mszyprow: dropped the lpa() macro removal]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251218-fix-parisc-conversion-v1-1-4a04d26b0168@nvidia.com
Commit 33729a5fc0 ("iommu/io-pgtable-arm: Remove split on unmap
behavior") did away with the treatment of partial unmaps of huge IOPTEs.
In the case of Panthor, that means an attempt to run a VM_BIND unmap
operation on a memory region whose start address and size aren't 2MiB
aligned, in the event it intersects with a huge page, would lead to ARM
IOMMU management code to fail and a warning being raised.
Presently, and for lack of a better alternative, it's best to have
Panthor handle partial unmaps at the driver level, by unmapping entire
huge pages and remapping the difference between them and the requested
unmap region.
This could change in the future when the VM_BIND uAPI is expanded to
enforce huge page alignment and map/unmap operational constraints that
render this code unnecessary.
When a partial unmap for a huge PTE is attempted, we also need to expand
the locked region to encompass whole huge pages.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251217213252.677020-2-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The CTCU device for monaco shares the same configurations as SA8775p. Add
a fallback to enable the CTCU for monaco to utilize the compitable of the
SA8775p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251103-enable-ctcu-for-monaco-v4-1-92ff83201584@oss.qualcomm.com
