Commit graph

1,188,286 commits

Author SHA1 Message Date
Zhang Qilong
173cdf2c32 f2fs: use COMPRESS_MAPPING to get compress cache mapping
Just use the defined COMPRESS_MAPPING to get compress cache
mapping instaed of direct accessing name.

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-10-04 13:31:42 -07:00
Zhang Qilong
280dfeae56 f2fs: return the tmp_ptr directly in __bitmap_ptr
Just return tmp_ptr here, it's no need to dereference
checkpoint pointer again.

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-10-04 13:31:42 -07:00
José Roberto de Souza
47d4ae2192 drm/i915/mtl: Extend PSR support
Meteorlake and display 14 platform don't have any PSR differences
when comparing to Alderlake-P display, so it was only necessary to
extend some checks to properly program hardware.

BSpec: 55229, 49196

Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907081543.92268-1-mika.kahola@intel.com
2022-10-04 13:21:00 -07:00
Anup Patel
e623715f3d
RISC-V: Increase range and default value of NR_CPUS
Currently, the range and default value of NR_CPUS is too restrictive
for high-end RISC-V systems with large number of HARTs. The latest
QEMU virt machine supports upto 512 CPUs so the current NR_CPUS is
restrictive for QEMU as well. Other major architectures (such as
ARM64, x86_64, MIPS, etc) have a much higher range and default
value of NR_CPUS.

This patch increases NR_CPUS range to 2-512 and default value to
XLEN (i.e. 32 for RV32 and 64 for RV64).

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20220420112408.155561-1-apatel@ventanamicro.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-04 13:16:44 -07:00
Dave Hansen
c5129ecc12 x86/mm: Ease W^X enforcement back to just a warning
Currently, the "change_page_attr" (CPA) code refuses to create
W+X mappings on 64-bit kernels.  There have been reports both
from 32-bit[1] and from BPF[2] users where this change kept the
system from booting.

These reports are showing up even after about a month of soak
time in -next.

To avoid breaking anything, never enforce W^X.  Always warn
and return the requested permissions even if a problem is
detected.

1. https://lore.kernel.org/all/CAMj1kXHcF_iK_g0OZSkSv56Wmr=eQGQwNstcNjLEfS=mm7a06w@mail.gmail.com/
2. https://lore.kernel.org/bpf/c84cc27c1a5031a003039748c3c099732a718aec.camel@kernel.org/T/#u

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2022-10-04 12:53:52 -07:00
Ville Syrjälä
86101bb7e0 drm/edid: Extract drm_gtf2_mode()
Extract the GTF vs. GTF2 logic into a separate function.
We'll have a second user soon.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-5-ville.syrjala@linux.intel.com
2022-10-04 22:44:38 +03:00
Ville Syrjälä
ca2582c66b drm/edid: Only parse VRR range for continuous frequency displays
Since we only use the parsed vrefresh range to determine
if VRR should be supported we should only accept continuous
frequency displays here.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-4-ville.syrjala@linux.intel.com
2022-10-04 22:44:33 +03:00
Ville Syrjälä
afd4429eba drm/edid: Define more flags
Replace a bunch of hex constants with proper definitions.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-3-ville.syrjala@linux.intel.com
2022-10-04 22:43:53 +03:00
Ville Syrjälä
67d7469a17 drm/edid: Clarify why we only accept the "range limits only" descriptor
The current comment fails to clarify why we only accept
the "range limits only" variant of the range descriptor.
Reword it to make some actual sense.

Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-2-ville.syrjala@linux.intel.com
2022-10-04 22:42:11 +03:00
Paul Cercueil
34e1ed189f PM: Improve EXPORT_*_DEV_PM_OPS macros
Update the _EXPORT_DEV_PM_OPS() internal macro. It was not used anywhere
outside pm.h and pm_runtime.h, so it is safe to update it.

Before, this macro would take a few parameters to be used as sleep and
runtime callbacks. This made it unsuitable to use with different
callbacks, for instance the "noirq" ones.

It is now semantically different: instead of creating a conditionally
exported dev_pm_ops structure, it only contains part of the definition.

This macro should however never be used directly (hence the trailing
underscore). Instead, the following four macros are provided:
- EXPORT_DEV_PM_OPS(name)
- EXPORT_GPL_DEV_PM_OPS(name)
- EXPORT_NS_DEV_PM_OPS(name, ns)
- EXPORT_NS_GPL_DEV_PM_OPS(name, ns)

For instance, it is now possible to conditionally export noirq
suspend/resume PM functions like this:

EXPORT_GPL_DEV_PM_OPS(foo_pm_ops) = {
    NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
};

The existing helper macros EXPORT_*_SIMPLE_DEV_PM_OPS() and
EXPORT_*_RUNTIME_DEV_PM_OPS() have been updated to use these new macros.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04 20:52:38 +02:00
Linus Torvalds
522667b24f Landlock updates for v6.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYzxenhAcbWljQGRpZ2lr
 b2QubmV0AAoJEOXj0OiMgvbSYpMA/iWIaLAS5P1Hh5/42NKGjsxwt9sNM6tKivYP
 gJidPsq5AQCzj/21kMLPVMxCauKvMRPs84wvLd6W7JwjJvGsigefCg==
 =pDda
 -----END PGP SIGNATURE-----

Merge tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
 "Improve user help for Landlock (documentation and sample)"

* tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix documentation style
  landlock: Slightly improve documentation and fix spelling
  samples/landlock: Print hints about ABI versions
2022-10-04 11:13:38 -07:00
Jason Gunthorpe
c82e81ab25 vfio: Change vfio_group->group_rwsem to a mutex
These days not much is using the read side:
 - device first open
 - ioctl_get_status
 - device FD release
 - check enforced_coherent

None of this is performance, so just make it into a normal mutex.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/2-v1-917e3647f123+b1a-vfio_group_users_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Jason Gunthorpe
912b74d26c vfio: Remove the vfio_group->users and users_comp
Kevin points out that the users is really just tracking if
group->opened_file is set, so we can simplify this code to a wait_queue
that looks for !opened_file under the group_rwsem.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/1-v1-917e3647f123+b1a-vfio_group_users_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Jason Gunthorpe
9c799c224d vfio/mdev: add mdev available instance checking to the core
Many of the mdev drivers use a simple counter for keeping track of the
available instances. Move this code to the core code and store the counter
in the mdev_parent. Implement it using correct locking, fixing mdpy.

Drivers just provide the value in the mdev_driver at registration time
and the core code takes care of maintaining it and exposing the value in
sysfs.

[hch: count instances per-parent instead of per-type, use an atomic_t
 to avoid taking mdev_list_lock in the show method]

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
685a1537f4 vfio/mdev: consolidate all the description sysfs into the core code
Every driver just emits a string, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.

Remove the now unused types_attrs field in struct mdev_driver and the
support code for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-14-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
f2fbc72e6d vfio/mdev: consolidate all the available_instance sysfs into the core code
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
0bc79069cc vfio/mdev: consolidate all the name sysfs into the core code
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Jason Gunthorpe
290aac5df8 vfio/mdev: consolidate all the device_api sysfs into the core code
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
c7c1f38f6c vfio/mdev: remove mtype_get_parent_dev
Just open code the dereferences in the only user.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
062e720cd2 vfio/mdev: remove mdev_parent_dev
Just open code the dereferences in the only user.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
2815fe149f vfio/mdev: unexport mdev_bus_type
mdev_bus_type is only used in mdev.ko now, so unexport it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
cbf3bb28aa vfio/mdev: remove mdev_from_dev
Just open code it in the only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
da44c340c4 vfio/mdev: simplify mdev_type handling
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.

This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
89345d5177 vfio/mdev: embedd struct mdev_parent in the parent data structure
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure.  This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
bdef2b7896 vfio/mdev: make mdev.h standalone includable
Include <linux/device.h> and <linux/uuid.h> so that users of this headers
don't need to do that and remove those includes that aren't needed
any more.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
1aa3834f51 drm/i915/gvt: simplify vgpu configuration management
Instead of copying the information from the vgpu_types arrays into each
intel_vgpu_type structure, just reference this constant information
with a pointer to the already existing data structure, and pass it into
the low-level VGPU creation helpers intead of copying the data into yet
anothe params data structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://lore.kernel.org/r/20220923092652.100656-3-hch@lst.de
[aw: Fold fix from 20220928121110.GA30738@lst.de]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Christoph Hellwig
9882895597 drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
gvt->types needs to be freed on error.

Fixes: bc90d097ae ("drm/i915/gvt: define weight according to vGPU type")
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://lore.kernel.org/r/20220923092652.100656-2-hch@lst.de
[aw: Correct fixes commit ID as reported by Stephen Rothwell]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04 12:06:58 -06:00
Linus Torvalds
c645c11a2d audit/stable-6.1 PR 20221003
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmM68bIUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXN1/Q/+L0xoduzZg6u8cpkVrBmqPmhFFxDi
 580v69CUcXa29+sxVpH7rPJIhaR/EK/UrdNTVgGa+cvo11StgzuieY3Ds3gzfhmf
 7G7fvZtiloZ1SWnfUMuk3NxNCWBHGE7CE2l+CgWqKmWuOlXcHyq81ydJ1Aydr8Gr
 qJhGPf+StC2XxXGlsAqKHboxTRbFDREFKrKllF2XYOiNNcGoyNcmeSoLGzTweWTx
 52YbtiUtjOk4r482QJKwGRxmKLfFPeMDr7BZmB8acZasp+o0nLF9yaFlSUEmiwZO
 XMIqszdhywAhe0z+WAy6TnoQSHWkHKILa2+R2se7XB+EpEWie01bOfsYqg21Pgt8
 HzcQ9edsiykCtXmgZLTt6K1+aKvBaY2R0kKtBhNR7Rn8XyfR5f9VCVE+YNCZAVxu
 OiQdvFX/etAc0bWAJzgDL1r3mHkMGmsyg+s1rXQoNnaAIK3t9VBCgKndWkoblHGF
 jnoUceU17RZiuqwwjp4FSSniX/1yHexIPGHvYY7lwrgbDeBgiZpOJM1mVZqW3ShE
 X+xgWyYIaLGndavzn41dzaa8irfRpvzWE3xywnghJx6BDGKwAkSX/yBpE3EzXirf
 nUE+50g919U27DWsWwm2ev+DkJwdb1d11jRRJbcNqHOqN3FCEmSGQAAl0h79Bib8
 +/V0XWZ1tFOjPkE=
 =52r/
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "Six audit patches for v6.1, most are pretty trivial, but a quick list
  of the highlights are below:

   - Only free the audit proctitle information on task exit. This allows
     us to cache the information and improve performance slightly.

   - Use the time_after() macro to do time comparisons instead of doing
     it directly and potentially causing ourselves problems when the
     timer wraps.

   - Convert an audit_context state comparison from a relative enum
     comparison, e.g. (x < y), to a not-equal comparison to ensure that
     we are not caught out at some unknown point in the future by an
     enum shuffle.

   - A handful of small cleanups such as tidying up comments and
     removing unused declarations"

* tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: remove selinux_audit_rule_update() declaration
  audit: use time_after to compare time
  audit: free audit_proctitle only on task exit
  audit: explicitly check audit_context->context enum value
  audit: audit_context pid unused, context enum comment fix
  audit: fix repeated words in comments
2022-10-04 11:05:43 -07:00
Stephen Boyd
f9efefdba9 Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' into clk-next
- Convert Baikal-T1 CCU driver to platform driver
 - Split reset support out of primary Baikal-T1 CCU driver
 - Add some missing clks required for RPiVid Video Decoder on RaspberryPi
 - Mark PLLC critical on bcm2835
 - Support for Renesas VersaClock7 clock generator family

* clk-baikal:
  clk: baikal-t1: Convert to platform device driver
  clk: baikal-t1: Add DDR/PCIe directly controlled resets support
  dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs
  clk: baikal-t1: Move reset-controls code into a dedicated module
  clk: baikal-t1: Add SATA internal ref clock buffer
  clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
  clk: baikal-t1: Fix invalid xGMAC PTP clock divider
  clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD

* clk-broadcom:
  clk: bcm: rpi: Add support for VEC clock
  clk: bcm: rpi: Handle pixel clock in firmware
  clk: bcm: rpi: Add support HEVC clock
  clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
  clk: bcm2835: Round UART input clock up
  clk: bcm2835: Make peripheral PLLC critical

* clk-vc5:
  clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
  dt-bindings: clock: vc5: Add 5P49V6975
  clk: vc5: Use regmap_{set,clear}_bits() where appropriate
  clk: vc5: Check IO access results

* clk-versaclock:
  clk: Renesas versaclock7 ccf device driver
  dt-bindings: Renesas versaclock7 device tree bindings
2022-10-04 10:54:34 -07:00
Stephen Boyd
b7f257ceb3 Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' into clk-next
- More devm helpers for fixed rate registration
 - Add Spreadtrum UMS512 SoC clk support
 - Various PXA168 clk driver fixes

* clk-fixed-rate:
  clk: fixed-rate: add devm_clk_hw_register_fixed_rate
  clk: asm9260: use parent index to link the reference clock

* clk-spreadtrum:
  clk: sprd: Add clocks support for UMS512

* clk-pxa:
  clk: pxa: add a check for the return value of kzalloc()
  clk: mmp: pxa168: control shared SDH bits with separate clock
  dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks
  clk: mmp: pxa168: add clocks for SDH2 and SDH3
  dt-bindings: marvell,pxa168: add clock id for SDH3
  clk: mmp: pxa168: fix GPIO clock enable bits
  clk: mmp: pxa168: add muxes for more peripherals
  clk: mmp: pxa168: fix incorrect parent clocks
  clk: mmp: pxa168: fix const-correctness
  clk: mmp: pxa168: add new clocks for peripherals
  dt-bindings: marvell,pxa168: add clock ids for additional dividers
  clk: mmp: pxa168: fix incorrect dividers
  clk: mmp: pxa168: add additional register defines

* clk-ti:
  clk: davinci: cfgchip: Use dev_err_probe() helper
  clk: davinci: pll: fix spelling typo in comment
  MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
2022-10-04 10:54:14 -07:00
Stephen Boyd
26bebbfed5 Merge branches 'clk-rockchip', 'clk-renesas', 'clk-microchip', 'clk-allwinner' and 'clk-imx' into clk-next
* clk-rockchip:
  dt-bindings: clock: rockchip: change SPDX-License-Identifier
  dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML
  clk: rockchip: Add clock controller support for RV1126 SoC
  dt-bindings: clock: rockchip: Document RV1126 CRU
  clk: rockchip: Add dt-binding header for RV1126
  clk: rockchip: Add MUXTBL variant

* clk-renesas:
  clk: renesas: r8a779g0: Add EtherAVB clocks
  clk: renesas: r8a779g0: Add PFC/GPIO clocks
  clk: renesas: r8a779g0: Add I2C clocks
  clk: renesas: r8a779g0: Add watchdog clock
  dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoC
  clk: renesas: r8a779f0: Add MSIOF clocks
  clk: renesas: r9a09g011: Add IIC clock and reset entries
  clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_info
  clk: renesas: r8a779f0: Add TMU and parent SASYNC clocks
  clk: renesas: r8a779f0: Add CMT clocks
  clk: renesas: r8a779f0: Add SDH0 clock

* clk-microchip:
  clk: at91: sama5d2: Add Generic Clocks for UART/USART
  clk: microchip: add PolarFire SoC fabric clock support
  dt-bindings: clk: add PolarFire SoC fabric clock ids
  dt-bindings: clk: document PolarFire SoC fabric clocks
  dt-bindings: clk: rename mpfs-clkcfg binding
  clk: microchip: mpfs: update module authorship & licencing
  clk: microchip: mpfs: convert periph_clk to clk_gate
  clk: microchip: mpfs: convert cfg_clk to clk_divider
  clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo()
  clk: microchip: mpfs: simplify control reg access
  clk: microchip: mpfs: move id & offset out of clock structs
  clk: microchip: mpfs: add MSS pll's set & round rate
  MAINTAINERS: add polarfire soc reset controller
  reset: add polarfire soc reset support
  clk: microchip: mpfs: add reset controller
  dt-bindings: clk: microchip: mpfs: add reset controller support
  clk: microchip: mpfs: make the rtc's ahb clock critical
  clk: microchip: mpfs: fix clk_cfg array bounds violation

* clk-allwinner:
  clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper
  clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper
  clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helper
  clk: sunxi-ng: d1: Limit PLL rates to stable ranges

* clk-imx:
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: imx93: add SAI IPG clk
  clk: imx93: add MU1/2 clock
  clk: imx93: switch to use new clk gate API
  clk: imx: add i.MX93 clk gate
  clk: imx: clk-composite-93: check white_list
  clk: imx: clk-composite-93: check slice busy
  dt-bindings: clock: imx93-clock: add more MU/SAI clocks
  dt-bindings: clock: imx8mm: don't use multiple blank lines
  clk: imx8mp: tune the order of enet_qos_root_clk
2022-10-04 10:54:02 -07:00
Stephen Boyd
a64b79c01c Merge branches 'clk-samsung', 'clk-mtk', 'clk-rm', 'clk-ast' and 'clk-qcom' into clk-next
- Add resets for MediaTek MT8195 PCIe and USB
 - Remove DaVinci DM644x and DM646x clk driver support

* clk-samsung:
  clk: samsung: MAINTAINERS: add Krzysztof Kozlowski
  clk: samsung: exynos850: Implement CMU_MFCMSCL domain
  clk: samsung: exynos850: Implement CMU_IS domain
  clk: samsung: exynos850: Implement CMU_AUD domain
  clk: samsung: exynos850: Style fixes
  clk: samsung: exynosautov9: add fsys1 clock support
  clk: samsung: exynosautov9: add fsys0 clock support
  clk: samsung: exynosautov9: correct register offsets of peric0/c1
  clk: samsung: exynosautov9: add missing gate clks for peric0/c1
  dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL
  dt-bindings: clock: exynos850: Add Exynos850 CMU_IS
  dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD
  dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1
  dt-bindings: clock: exynosautov9: add fsys1 clock definitions
  dt-bindings: clock: exynosautov9: add fys0 clock definitions
  clk: samsung: exynos7885: Add TREX clocks
  clk: samsung: exynos7885: Implement CMU_FSYS domain
  dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1
  clk: samsung: exynos-clkout: Use of_device_get_match_data()

* clk-mtk: (42 commits)
  clk: mediatek: add driver for MT8365 SoC
  clk: mediatek: Export required common code symbols
  clk: mediatek: Provide mtk_devm_alloc_clk_data
  dt-bindings: clock: mediatek: add bindings for MT8365 SoC
  clk: mediatek: mt8192: deduplicate parent clock lists
  clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*()
  clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup
  clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel
  clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent
  clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents
  clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier
  clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux
  clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes
  clk: mediatek: mt8183: Add clk mux notifier for MFG mux
  clk: mediatek: mux: add clk notifier functions
  clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
  clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe
  clk: mediatek: gate: Export mtk_clk_register_gates_with_dev
  clk: mediatek: add VDOSYS1 clock
  dt-bindings: clk: mediatek: Add MT8195 DPI clocks
  ...

* clk-rm:
  clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x

* clk-ast:
  clk: ast2600: BCLK comes from EPLL

* clk-qcom: (97 commits)
  clk: qcom: gcc-sm6375: Ensure unsigned long type
  clk: qcom: gcc-sm6375: Remove unused variables
  clk: qcom: kpss-xcc: convert to parent data API
  clk: introduce (devm_)hw_register_mux_parent_data_table API
  clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-msm8939: use parent_hws where possible
  dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml
  clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs
  clk: qcom: gcc-sc8280xp: use retention for USB power domains
  clk: qcom: gdsc: add missing error handling
  dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos
  clk: qcom: Add global clock controller driver for SM6375
  dt-bindings: clock: add SM6375 QCOM global clock bindings
  clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit
  clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs
  clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc
  clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
  clk: qcom: Add SC8280XP GPU clock controller
  dt-bindings: clock: Add Qualcomm SC8280XP GPU binding
  clk: qcom: smd: Add SM6375 clocks
  ...
2022-10-04 10:53:41 -07:00
Stephen Boyd
49f4c2d101 Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and 'clk-xilinx' into clk-next
- Miscellaneous of_node_put() fixes
 - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
 - Convert gpio-clk-gate binding to YAML
 - Various fixes to AMD/Xilinx Zynqmp clk driver
 - Graduate AMD/Xilinx "clocking wizard" driver from staging

* clk-ofnode:
  clk: ti: Balance of_node_get() calls for of_find_node_by_name()
  clk: tegra20: Fix refcount leak in tegra20_clock_init
  clk: tegra: Fix refcount leak in tegra114_clock_init
  clk: tegra: Fix refcount leak in tegra210_clock_init
  clk: sprd: Hold reference returned by of_get_parent()
  clk: berlin: Add of_node_put() for of_get_parent()
  clk: at91: dt-compat: Hold reference returned by of_get_parent()
  clk: qoriq: Hold reference returned by of_get_parent()
  clk: oxnas: Hold reference returned by of_get_parent()
  clk: st: Hold reference returned by of_get_parent()
  clk: tegra: Add missing of_node_put()
  clk: meson: Hold reference returned by of_get_parent()
  clk: nomadik: Add missing of_node_put()

* clk-bindings:
  dt-bindings: clock: drop minItems equal to maxItems
  dt-bindings: clock: gpio-gate-clock: Convert to json-schema
  dt-bindings: clock: Move versaclock.h to dt-bindings/clock
  dt-bindings: clock: Move lochnagar.h to dt-bindings/clock

* clk-cleanup:
  clk: allow building lan966x as a module
  clk: clk-xgene: simplify if-if to if-else
  clk: nxp: fix typo in comment
  clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
  clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
  clkdev: Simplify devm_clk_hw_register_clkdev() function
  clkdev: Remove never used devm_clk_release_clkdev()
  clk: Remove never used devm_of_clk_del_provider()
  clk: pistachio: Fix initconst confusion
  clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data
  clk: do not initialize ret
  clk: remove extra empty line
  clk: Fix comment typo
  clk: move from strlcpy with unused retval to strscpy

* clk-zynq:
  clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
  clk: zynqmp: Check the return type zynqmp_pm_query_data
  clk: zynqmp: Add a check for NULL pointer
  clk: zynqmp: Replaced strncpy() with strscpy()
  clk: zynqmp: Fix stack-out-of-bounds in strncpy`
  clk: zynqmp: make bestdiv unsigned

* clk-xilinx:
  clk: clocking-wizard: Depend on HAS_IOMEM
  clk: clocking-wizard: Use dev_err_probe() helper
  clk: clocking-wizard: Update the compatible
  clk: clocking-wizard: Fix the reconfig for 5.2
  clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs
  clk: clocking-wizard: Move clocking-wizard out
  dt-bindings: add documentation of xilinx clocking wizard
2022-10-04 10:53:04 -07:00
Ankit Nautiyal
5e931c88b6 drm/edid: Avoid multiple log lines for HFVSDB parsing
Replace multiple log lines with a single log line at the end of
parsing HF-VSDB. Also use drm_dbg_kms instead of DRM_DBG_KMS, and
add log for DSC1.2 support.

v2: Fixed the formatting issues in the logging (Jani).

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-5-ankit.k.nautiyal@intel.com
2022-10-04 20:35:51 +03:00
Ankit Nautiyal
a07e6f56b3 drm/edid: Refactor HFVSDB parsing for DSC1.2
DSC capabilities are given in bytes 11-13 of VSDB (i.e. bytes 8-10 of
SCDS). Since minimum length of Data block is 7, all bytes greater than 7
must be read only after checking the length of the data block.

This patch adds check for data block length before reading relavant DSC
bytes.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-4-ankit.k.nautiyal@intel.com
2022-10-04 20:35:49 +03:00
Ankit Nautiyal
5e706c4db9 drm/edid: Split DSC parsing into separate function
Move the DSC parsing logic into separate function.

v2: Rebase.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-3-ankit.k.nautiyal@intel.com
2022-10-04 20:35:47 +03:00
Ankit Nautiyal
18feaf6d07 drm/edid: Fix minimum bpc supported with DSC1.2 for HDMI sink
HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc.
If none of the bits are set, the minimum bpc supported with DSC is 8.

This patch corrects the min bpc supported to be 8, instead of 0.

Fixes: 76ee7b9056 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

v2: s/DSC1.2/DSC 1.2

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com
2022-10-04 20:35:43 +03:00
Stephen Boyd
39bc9b589e clk: qcom: gcc-sm6375: Ensure unsigned long type
This PLL frequency needs a UL postfix to avoid compiler warnings on
32-bit architectures.

Fixes: 184fdd873d ("clk: qcom: Add global clock controller driver for SM6375")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04 10:24:26 -07:00
Linus Torvalds
3eba620e7b - The usual round of smaller fixes and cleanups all over the tree
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8QskACgkQEsHwGGHe
 VUq2ZQ/+KwgmCojK54P05UOClpvf96CLDJA7r4m6ydKiM7GDWFg9wCZdews4JRk1
 /5hqfkFZsEAUlloRjRk3Qvd6PWRzDX8X/jjtHn3JyzRHT6ra31tyiZmD2LEb4eb6
 D0jIHfZQRYjZP39p3rYSuSMFrdWWE8gCETJLZEflR96ACwHXlm1fH/wSRI2RUG4c
 sH7nT/hGqtKiDsmOcb314yjmjraYEW1mKnLKRLfjUwksBET4mOiLTjH175MQ5Yv7
 cXZs0LsYvdfCqWSH5uefv32TX/yLsIi8ygaALpXawkoyXTmLr5MwJJykrm60AogV
 74gvxc3s3ItO0aKVM0J4ABTUWmU+wg+sjPcJD1MolafnJpsgGdfEKlWfTY4hjMV5
 onjtgr7byEdgZU25JtuI0BzPoggahnHvK6LiIvGy9vw8LRdKziKPXsyxuRF4rvXw
 0n9ofVRmBCuzUsRS8vbL65K2PcIS4oUmUUSEDmALtGQ9vG8j50k6vM3Fu6HayyJx
 7qgjVRpREemqRO21wS7SmR6z1RkT5J+zWv4TdacyyrA9QRqyM6ny/yZGCsfOZA77
 +LxBFzITwIXlTgfTDVYnLIi1ZPP2MCK74Gq0Buqsjxz8IOpV6yjB+PSajbJzZv35
 gIdbWKc5oHgmcDkrpBCoZ6KQ5ZNvDy6glSdnegkDFjRfVm5eCu0=
 =RqjF
 -----END PGP SIGNATURE-----

Merge tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cleanups from Borislav Petkov:

 - The usual round of smaller fixes and cleanups all over the tree

* tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
  x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32
  x86: Fix various duplicate-word comment typos
  x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h
2022-10-04 10:24:11 -07:00
Konrad Dybcio
a76d550f76 clk: qcom: gcc-sm6375: Remove unused variables
gcc_parent_data_15 and gcc_parent_map_15 are not used in this driver.
Remove them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20221003211438.25691-1-konrad.dybcio@somainline.org
Fixes: 184fdd873d ("clk: qcom: Add global clock controller driver for SM6375")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-04 10:18:19 -07:00
Tiezhu Yang
71cf0c1c4f ceph: remove Sage's git tree from documentation
Sage's git tree has not been pushed to in years, and it was removed in
commit 3a5ccecd9a ("MAINTAINERS: remove myself as ceph co-maintainer"),
so it is better to remove it in the documentation too.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Xiubo Li
aa87052dd9 ceph: fix incorrectly showing the .snap size for stat
We should set the 'stat->size' to the real number of snapshots for
snapdirs.

Link: https://tracker.ceph.com/issues/57342
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Xiubo Li
bd04b9192e ceph: fail the open_by_handle_at() if the dentry is being unlinked
When unlinking a file the kclient will send a unlink request to MDS
by holding the dentry reference, and then the MDS will return 2 replies,
which are unsafe reply and a deferred safe reply.

After the unsafe reply received the kernel will return and succeed
the unlink request to user space apps.

Only when the safe reply received the dentry's reference will be
released. Or the dentry will only be unhashed from dcache. But when
the open_by_handle_at() begins to open the unlinked files it will
succeed.

The inode->i_count couldn't be used to check whether the inode is
opened or not.

Link: https://tracker.ceph.com/issues/56524
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Tested-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Jeff Layton
b4b924c7a1 ceph: increment i_version when doing a setattr with caps
When the client has enough caps to satisfy a setattr locally without
having to talk to the server, we currently do the setattr without
incrementing the change attribute.

Ensure that if the ctime changes locally, then the change attribute
does too.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Kenneth Lee
aa1d627207 ceph: Use kcalloc for allocating multiple elements
Prefer using kcalloc(a, b) over kzalloc(a * b) as this improves
semantics since kcalloc is intended for allocating an array of memory.

Signed-off-by: Kenneth Lee <klee33@uw.edu>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Xiubo Li
7c3ea9870e ceph: no need to wait for transition RDCACHE|RD -> RD
For write when trying to get the Fwb caps we need to keep waiting
on transition from WRBUFFER|WR -> WR to avoid a new WR sync write
from going before a prior buffered writeback happens.

While for read there is no need to wait on transition from
RDCACHE|RD -> RD, and we can just exclude the revoking caps and
force to sync read.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Xiubo Li
6eb06c4621 ceph: fail the request if the peer MDS doesn't support getvxattr op
Just fail the request instead sending the request out, or the peer
MDS will crash.

Link: https://tracker.ceph.com/issues/56529
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Xiubo Li
f791357330 ceph: wake up the waiters if any new caps comes
When new caps comes we need to wake up the waiters and also when
revoking the caps, there also could be new caps comes.

Link: https://tracker.ceph.com/issues/54044
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Jeff Layton
da4ab869e3 libceph: drop last_piece flag from ceph_msg_data_cursor
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-10-04 19:18:08 +02:00
Linus Torvalds
193e2268a3 - More work by James Morse to disentangle the resctrl filesystem generic
code from the architectural one with the endgoal of plugging ARM's MPAM
 implementation into it too so that the user interface remains the same
 
 - Properly restore the MSR_MISC_FEATURE_CONTROL value instead of blindly
 overwriting it to 0
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8QhAACgkQEsHwGGHe
 VUqazA/8DIfBYMXe/M6qk+tZnLyBJPL3/3hzqOPc3fu2pmwzCHhb+1ksk7s0uLEO
 xdV4CK3SDc8WQnsiF9l4Hta1PhvD2Uhf6duCVv1DT0dmBQ6m9tks8SwhbgSCNrIh
 cQ8ABuTUsE0/PNW6Zx7x1JC0e2J6Yjhn55WGMGJD7kGl0eo1ClYSv8vnReBE/6cX
 YhgjVnWAeUNgwKayokbN7PFXwuP0WjDGmrn+7e8AF4emHWvdDYYw9F1MHIOvZoVO
 lLJi6f7ddjxCQSWPg3mG0KSvc4EXixhtEzq8Mk/16drkKlPdn89sHkqEyR7vP/jQ
 lEahxtzoWEfZXwVDPGCIIbfjab/lvvr4lTumKzxUgHEha+ORtWZGaukr4kPg6BRf
 IBrE12jCBKmYzzgE0e9EWGr0KCn6qXrnq37yzccQXVM0WxsBOUZWQXhInl6mSdz9
 uus1rKR/swJBT58ybzvw2LGFYUow0bb0qY6XvQxmriiyA60EVmf9/Nt/KgatXa63
 s9Q4mVii4W1tgxSmCjNVZnDFhXvvowclNU4TuJ6d+6kvEnrvoW5+vDRk2O7iJKqf
 K2zSe56lf0TnBe9WaUlxRFaTZg+UXZt7a+e7/hQ90wT/7fkIMk1uxVpqnQW4vDPi
 YskbKRPc5DlLBSJ+yxW9Ntff4QVIdUhhj0bcKBAo8nmd5Kj1hy4=
 =1iEb
 -----END PGP SIGNATURE-----

Merge tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cache resource control updates from Borislav Petkov:

 - More work by James Morse to disentangle the resctrl filesystem
   generic code from the architectural one with the endgoal of plugging
   ARM's MPAM implementation into it too so that the user interface
   remains the same

 - Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
   blindly overwriting it to 0

* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
  x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
  x86/resctrl: Rename and change the units of resctrl_cqm_threshold
  x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
  x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
  x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
  x86/resctrl: Abstract __rmid_read()
  x86/resctrl: Allow per-rmid arch private storage to be reset
  x86/resctrl: Add per-rmid arch private storage for overflow and chunks
  x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
  x86/resctrl: Allow update_mba_bw() to update controls directly
  x86/resctrl: Remove architecture copy of mbps_val
  x86/resctrl: Switch over to the resctrl mbps_val list
  x86/resctrl: Create mba_sc configuration in the rdt_domain
  x86/resctrl: Abstract and use supports_mba_mbps()
  x86/resctrl: Remove set_mba_sc()s control array re-initialisation
  x86/resctrl: Add domain offline callback for resctrl work
  x86/resctrl: Group struct rdt_hw_domain cleanup
  x86/resctrl: Add domain online callback for resctrl work
  x86/resctrl: Merge mon_capable and mon_enabled
  ...
2022-10-04 10:14:58 -07:00