A debug bit to output a complete transmission dump exists. Sometimes only
the user frames are relevant. Add an additional bit which limits the
transmission dump output to user data frames if set.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220831073800.7459-6-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce defines to name the various debug bits used within the code to
improve readability and to make its specific use clear.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220831073800.7459-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tfilter_put need to be called to put the refount got by tp->ops->get to
avoid possible refcount leak when chain->tmplt_ops != NULL and
chain->tmplt_ops != tp->ops.
Fixes: 7d5509fa0d ("net: sched: extend proto ops with 'put' callback")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the content of gsm_control_transmit() to a new function
gsm_control_command() with a more generic signature and analog to
gsm_control_reply(). Use this within gsm_control_transmit().
This is needed to simplify upcoming functional additions.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220831073800.7459-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a macro which defines the possible number of virtual devices for n_gsm
to improve code readability.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220831073800.7459-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an enumeration for the gsm mux encoding types to improve code
readability and to avoid invalid values. Only two values are defined by the
standard:
- basic option mode
- advanced option mode (uses ISO HDLC standard transparency mechanism)
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220831073800.7459-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add scancodes reported by the touchpad on/off button. The actual disabling
and enabling is done in hardware, and this just reports that change to
userspace.
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Link: https://lore.kernel.org/r/20220922115459.6511-1-dhould3@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
By swapping the definition of skl_int3472_discrete_remove() and
skl_int3472_discrete_probe() the forward declaration of the former can
be dropped. This is a good thing as it removes code duplication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220920070101.907596-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
turn_on_panel_on_resume is only used in toshiba_acpi.c now, change it
to static.
Fixes: 3cb1f40dfd ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220920084434.3739493-1-yangyingliang@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit 86d92f5465,
which fix the timeout issue for "Samsung Fit Flash".
But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.
# hdparm -t /dev/sda (without the quirk)
Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec
# hdparm -t /dev/sda (with the quirk)
Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.
Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3_get_properties() function calls:
dwc->usb_psy = power_supply_get_by_name(usb_psy_name);
so there is some additional clean up required on these error paths.
Fixes: 6f0764b5ad ("usb: dwc3: add a power supply for current control")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YyxFYFnP53j9sCg+@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When configured in HOST mode, after issuing U3/L2 exit controller fails
to send proper CRC checksum in CRC5 field. Because of this behavior
Transaction Error is generated, resulting in reset and re-enumeration of
usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this
problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations, term, and xcvr signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.
Added "snps,resume-hs-terminations" quirk to resolved the above issue.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new 'snps,resume-hs-terminations' DT quirk to dwc3 core to resolved
issue of CRC failed error.
On the resume path, U3/U2 exit controller fails to send proper CRC checksum
in CRC5 field. As result Transaction Error is generated. Enabling bit 10 of
GUCTL1 will correct this problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations and term/xcvr select signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-2-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this set the SOF/ITP counter is based on ref_clk when 2.0 ports are
suspended.
snps,dis-u2-freeclk-exists-quirk can be removed as
snps,gfladj-refclk-lpm-sel also clears the free running clock configuration
bit.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This selects the SOF/ITP counter be running on ref_clk. As documented
U2_FREECLK_EXISTS has to be set to 0 as well.
Reviewed-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-3-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This selects SOF/ITP to be running on ref_clk.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB3 PCIe device ID's needs to be updated for the device to enumerate as
a USB3 device on the host for Alder Lake P.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20220913055316.23050-3-shruthi.sanil@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device ID 0x465e is defined for the USB3 device controller in the CPU
sub-system of Alder Lake N platform. Hence updating the macro name
accordingly.
The device ID 0x54ee is defined for the USB2 controller on the PCH
sub-system for Alder Lake N platform. Hence updating the macro name
accordingly.
The device ID's defined for Alder Lake P is shared between
Alder Lake P, Alder Lake PS and Alder Lake M.
Hence updating the macro name to ADL from ADLP to make it common
and keeping it aligned with the xHCI ID's naming convention.
As we have two device controllers on Alder Lake platforms
i.e. one on PCH sub-system and another on CPU sub-system(USB3),
appending _PCH for the USB2 device ID macro to differentiate
between the 2 ID's.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20220913055316.23050-2-shruthi.sanil@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When USB is in super-speed mode and disabled as a wakeup source,
observed that on the resume path, lanes have not been configured
properly in the phy-zynqmp driver.
As a result, after the resume, USB device detection failed on host.
To resolved the above issue, added phy_init on resume and phy_exit
on suspend path, to configure the GT lanes correctly.
The re-initialization of phy, reset the device and re-enumerate
the USB subsystem.
This use-case is specific to Xilinx ZynqMP SoC.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220912111017.901321-3-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added system sleep and run-time power management ops support for
dwc3-xilinx glue layer and update function name.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220912111017.901321-2-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the uvc_v4l2_try_format api call to validate
the setting of v4l2_format. It will fallback to the nearest
allowed framesize.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220909221335.15033-5-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to the v4l2 VIDIOCs for enum_format,
enum_framesizes and enum_frameintervals. This way, the userspace
application can use these VIDIOCS to query the via configfs exported
frame capabilities. With thes callbacks the userspace doesn't have to
bring its own configfs parser.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220909221335.15033-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uvc_format_desc, GUID defines and the uvc_format_by_guid helper is
also useful for the uvc gadget stack. This patch moves them to a common
header.
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220909221335.15033-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions uvc_simplify_fraction and uvc_fraction_to_interval are
generic helpers which are also useful for other v4l2 drivers. This patch
moves them to v4l2-common.
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220909221335.15033-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Snapdragon 670 has DWC3 USB support. Add a compatible to reflect
that.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20220922024656.178529-3-mailingradian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Snapdragon 670 uses the QUSB driver for USB 2.0. Document the
compatible used in the device tree.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20220922024656.178529-2-mailingradian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All Qualcomm SoC DWC3 USB devices have a qcom,dwc3 fallback, thus there
is no need to keep the list of compatibles growing.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921084654.118230-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DWC3_EP_DELAYED_STOP is utilized to defer issuing the end transfer command
until the subsequent SETUP stage, in order to avoid end transfer timeouts.
During cable disconnect scenarios, __dwc3_gadget_ep_disable() is
responsible for ensuring endpoints have no active transfers pending. Since
dwc3_remove_request() can now exit early if the EP delayed stop is set,
avoid clearing all DEP flags, otherwise the transition back into the SETUP
stage won't issue an endxfer command.
Fixes: 2b2da6574e ("usb: dwc3: Avoid unmapping USB requests if endxfer is not complete")
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220919231213.21364-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot found an issue in usbmon module, where the user space client can
corrupt the monitor's internal memory, causing the usbmon module to
crash the kernel with segfault, UAF, etc.
The reproducer mmaps the /dev/usbmon memory to user space, and
overwrites it with arbitrary data, which causes all kinds of issues.
Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set.
Also clear VM_MAYWRITE to make it impossible to change it to writable
later.
Cc: "Dmitry Vyukov" <dvyukov@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6f23ee1fef ("USB: add binary API to usbmon")
Suggested-by: PaX Team <pageexec@freemail.hu> # for the VM_MAYRITE portion
Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a
Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In anx7411_typec_switch_probe(), we should call of_get_child_by_name()
instead of of_find_node_by_name() as of_find_xxx API will decrease the
refcount of the 'from' argument.
Fixes: fe6d8a9c8e ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220915092209.4009273-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SPDX-License-Identifier have been added in commit 5fd54ace47 ("USB: add
SPDX identifiers to all remaining files in drivers/usb/")
There is no point in keeping the now redundant license text.
Remove it.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When opts->pnp_string is changed with configfs, new memory is allocated for
the string. It does not, however, update dev->pnp_string, even though the
memory is freed. When rquesting the string, the host then gets old or
corrupted data rather than the new string. The ieee 1284 id string should
be allowed to change while the device is connected.
The bug was introduced in commit fdc01cc286 ("usb: gadget: printer:
Remove pnp_string static buffer"), which changed opts->pnp_string from a
char[] to a char*.
This patch changes dev->pnp_string from a char* to a char** pointing to
opts->pnp_string.
Fixes: fdc01cc286 ("usb: gadget: printer: Remove pnp_string static buffer")
Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com>
Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci used to test if link power management (LPM) capable USB2 devices
really could enter and exit L1 state link state.
Failed devices were added to a lpm_failed_dev list.
This feature was removed 9 years ago in
commit de68bab4fa ("usb: Don't enable USB 2.0 Link PM by default.")
but lpm_failed_dev member was still left.
Remove it now.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The u32 command was added to struct xhci_hcd over 10 years ago in
commit 9777e3ce90 ("USB: xHCI: bus power management implementation")
It wasn't even used back then, so remove it.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Show the completion code of a unsuccessful "enable slot" command.
Add it in a human readable form to the existing error message.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b328f8002 ("xhci: re-initialize the HC during resume if HCE was
set") introduced a new warning message when the host controller error
was set and re-initializing.
This is expected behavior on some designs which already set
`xhci->broken_suspend` so the new warning is alarming to some users.
Modify the code to only show the warning if this was a surprising behavior
to the XHCI driver.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470
Fixes: 8b328f8002 ("xhci: re-initialize the HC during resume if HCE was set")
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak.
Fixes: 534675942e ("xhci: dbc: refactor xhci_dbc_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Except for graphics version 8 and 9, nothing is done in
lrc_init_wa_ctx(). Assume this won't be needed on future platforms as
well and remove the warning.
Note that this function is not called for anything below version 8 since
those don't use either guc or execlist, i.e. HAS_EXECLISTS() is false.
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907230841.1703574-1-lucas.demarchi@intel.com
Here are the USB-serial updates for 6.1-rc1, including:
- a fix for a very long-standing FTDI SIO regression
- a long-overdue cleanup of the FTDI type handling
- support for new FTDI HP and HA devices
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYyxl3wAKCRALxc3C7H1l
CCxZAP0T7FH942QyTZZLiWOuS2eEOrwiskrZbNW7DA9CLqA4UwEAzDEWnQzfEpxJ
sONPl80YQB+1uikSgBVnf2yIak+WJgM=
=Bi2/
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.1-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
"USB-serial updates for 6.1-rc1
Here are the USB-serial updates for 6.1-rc1, including:
- a fix for a very long-standing FTDI SIO regression
- a long-overdue cleanup of the FTDI type handling
- support for new FTDI HP and HA devices
Included are also various clean ups.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.1-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ftdi_sio: clean up driver prefix
USB: serial: ftdi_sio: move driver structure
USB: serial: ftdi_sio: clean up attribute visibility logic
USB: serial: console: move mutex_unlock() before usb_serial_put()
USB: serial: ftdi_sio: convert to use dev_groups
USB: serial: ftdi_sio: add support for HP and HA devices
USB: serial: ftdi_sio: simplify divisor handling
USB: serial: ftdi_sio: assume hi-speed type
USB: serial: ftdi_sio: clean up baudrate request
USB: serial: ftdi_sio: clean up attribute handling
USB: serial: ftdi_sio: clean up modem-status handling
USB: serial: ftdi_sio: tighten device-type detection
USB: serial: ftdi_sio: rename channel index
USB: serial: ftdi_sio: include FT2232D in type string
USB: serial: ftdi_sio: rename chip types
USB: serial: ftdi_sio: drop redundant chip type comments
USB: serial: ftdi_sio: clean up chip type enum
USB: serial: ftdi_sio: fix 300 bps rate for SIO
There is a separate receive path for small packets (under 256 bytes).
Instead of allocating a new dma-capable skb to be used for the next packet,
this path allocates a skb and copies the data into it (reusing the existing
sbk for the next packet). There are two bytes of junk data at the beginning
of every packet. I believe these are inserted in order to allow aligned DMA
and IP headers. We skip over them using skb_reserve. Before copying over
the data, we must use a barrier to ensure we see the whole packet. The
current code only synchronizes len bytes, starting from the beginning of
the packet, including the junk bytes. However, this leaves off the final
two bytes in the packet. Synchronize the whole packet.
To reproduce this problem, ping a HME with a payload size between 17 and
214
$ ping -s 17 <hme_address>
which will complain rather loudly about the data mismatch. Small packets
(below 60 bytes on the wire) do not have this issue. I suspect this is
related to the padding added to increase the minimum packet size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no reason to consider the setup of Data Stolen Memory fatal on
dgfx and non-fatal on integrated. Move the debug and error propagation
around so both have the same behavior: non-fatal. Before this change,
loading i915 on a system with TGL + DG2 would result in just TGL
succeeding the initialization (without stolen).
Now loading i915 on the same system with an injected failure in
i915_gem_init_stolen():
$ dmesg | grep stolen
i915 0000:00:02.0: [drm] Injected failure, disabling use of stolen memory
i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup
i915 0000:03:00.0: [drm] Injected failure, disabling use of stolen memory
i915 0000:03:00.0: [drm:init_stolen_lmem [i915]] Skip stolen region: failed to setup
Both GPUs are still available:
$ sudo build/tools/lsgpu
card1 Intel Dg2 (Gen12) drm:/dev/dri/card1
└─renderD129 drm:/dev/dri/renderD129
card0 Intel Tigerlake (Gen12) drm:/dev/dri/card0
└─renderD128 drm:/dev/dri/renderD128
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915-stolen-v2-3-20ff797de047@intel.com
Add some helpers: adjust_stolen(), request_smem_stolen_() and
init_reserved_stolen() that are now called by i915_gem_init_stolen() to
initialize each part of the Data Stolen Memory region.
Main goal is to split the reserved part within the stolen, also known as
WOPCM, as its calculation changes often per platform and is a big source
of confusion when handling stolen memory.
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915-stolen-v2-2-20ff797de047@intel.com
