Geert Uytterhoeven says:
====================
dt-bindings: net: renesas,etheravb: R-Car Gen4 updates
This patch series contains two updates for the Renesas Ethernet AVB
Device Tree bindings.
====================
Link: https://lore.kernel.org/r/cover.1662714607.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the
Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
Add FEC support on s32v234 platform
This series patches are to add FEC support on s32v234 platfom.
1. Add compatible string and quirks for fsl,s32v234
2. Update Kconfig to also check for ARCH_S32.
====================
Link: https://lore.kernel.org/r/20220907095649.3101484-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update Kconfig to also check for ARCH_S32.
Add compatible string and quirks for fsl,s32v234
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add fsl,s32v234-fec to compatible property to support s32v234 platform.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cpumask code is written in assumption that when CONFIG_CPUMASK_OFFSTACK
is enabled, all cpumasks have boot-time defined size, otherwise the size
is always NR_CPUS.
The latter is wrong because the number of possible cpus is always
calculated on boot, and it may be less than NR_CPUS.
On my 4-cpu arm64 VM the nr_cpu_ids is 4, as expected, and nr_cpumask_bits
is 256, which corresponds to NR_CPUS. This not only leads to useless
traversing of cpumask bits greater than 4, this also makes some cpumask
routines fail.
For example, cpumask_full(0b1111000..000) would erroneously return false
in the example above because tail bits in the mask are all unset.
This patch deprecates nr_cpumask_bits and wires it to nr_cpu_ids
unconditionally, so that cpumask routines will not waste time traversing
unused part of cpu masks. It also fixes cpumask_full() and similar
routines.
As a side effect, because now a length of cpumasks is defined at run-time
even if CPUMASK_OFFSTACK is disabled, compiler can't optimize corresponding
functions.
It increases kernel size by ~2.5KB if OFFSTACK is off. This is addressed in
the following patch.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The comment says that HOTPLUG config option enables all cpus in
cpu_possible_mask up to NR_CPUs. This is wrong. Even if HOTPLUG is
enabled, the mask is populated on boot with respect to ACPI/DT records.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
In preparation to support compile-time nr_cpu_ids, add a setter for
the variable.
This is a no-op for all arches.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
SMP and NR_CPUS are independent options, hence nr_cpu_ids may be
declared even if NR_CPUS == 1, which is useless.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Introduce 'domain_id' mount option to enable shared domain sementics.
In which case, the related cookie is shared if two mountpoints in the
same domain have the same data blob. Users could specify the name of
domain by this mount option.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-7-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Several erofs filesystems can belong to one domain, and data blobs can
be shared among these erofs filesystems of same domain.
Users could specify domain_id mount option to create or join into a
domain.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918110150.6338-1-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
A new fscache-based shared domain mode is going to be introduced for
erofs. In which case, same data blobs in same domain will be shared
and reused to reduce on-disk space usage.
The implementation of sharing blobs will be introduced in subsequent
patches.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220918043456.147-4-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Remove the unused variable dev in st_ahci_probe() to avoid compilation
warning and build failures where CONFIG_WERROR is enabled.
Fixes: 3f74cd046f ("ata: libahci_platform: Parse ports-implemented property in resources getter")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Disable page_pool/XDP support for MT7621 SoC in order fix a regression
introduce adding XDP for MT7986 SoC. There is no a real use case for XDP
on MT7621 since it is a low-end cpu. Moreover this patch reduces the
memory footprint.
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Fixes: 23233e577e ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/2bf31e27b888c43228b0d84dd2ef5033338269e2.1663074002.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per GDMA spec, rmb is necessary after checking owner_bits, before
reading EQ or CQ entries.
Add rmb in these two places to comply with the specs.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reported-by: Sinan Kaya <Sinan.Kaya@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1662928805-15861-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Multiple maintainers have told us to start using the tracing
subsystem. Wish granted, this patchset suggested by Noah Klayman
removes a number of verbose and arguably useless dev_dbg or dev_vdbg
logs.
Beyond higher efficiency and less intrusive instrumentation, the use
of bpftrace scripts bring new functionality and helps gather
statistics on usage count on a running system, see how we can get
information on suspend/resume times with [1]
[1] https://github.com/thesofproject/sof-test/blob/main/kernel_tracing/bpftrace_scripts/suspend_resume_time.bt
The hwstats debugfs files are only writeable, but they are created with
read and write permissions, causing certain selftests to fail [1].
Fix by creating the files with write permission only.
[1]
# ./test_offload.py
Test destruction of generic XDP...
Traceback (most recent call last):
File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module>
simdev = NetdevSimDev()
[...]
Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex
cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument
Fixes: 1a6d7ae7d6 ("netdevsim: Introduce support for L3 offload xstats")
Reported-by: Jie2x Zhou <jie2x.zhou@intel.com>
Tested-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220909153830.3732504-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The struct_size() macro protects against integer overflows but adding
"+ rsc->config_len" introduces the risk of integer overflows again.
Use size_add() to be safe.
Fixes: c878465715 ("remoteproc: use struct_size() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/YyMyoPoGOJUcEpZT@kili
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Note that there is a behavior change in the driver: previously the
driver did not actually request GPIO, it simply parsed GPIO number out
of device tree and poked at it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/Yxe20ehiOnitDGus@google.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
-----BEGIN PGP SIGNATURE-----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=HdIo
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This node pointer is returned by of_find_compatible_node() with
refcount incremented in this function. of_node_put() on it before
exitting this function.
Fixes: c9cd961c0d ("net: dsa: microchip: lan937x: add interrupt support for port phy link")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220908040226.871690-1-sunke32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is
set after read. This patch adds logic to make sure the
lock is always cleared at the end of each MDIO transaction.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220902164247.19862-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I found no evidence that this chip version ever made it to the mass
market. Therefore disable detection. Like in similar cases before:
If nobody complains, we'll remove support for this chip version after
few months.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/ac622d4a-ae0a-3817-710f-849db4015c78@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is always unnecessary to initialise statics to 0.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
fs_mii_disconnect and fs_mii_connect have been removed since
commit 5b4b845434 ("[PATCH] FS_ENET: use PAL for mii management"),
so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220909062959.1144493-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The double `in' is duplicated in line 172, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Currently the panic notifiers from user mode linux don't follow
the convention for most of the other notifiers present in the
kernel (indentation, priority setting, numeric return).
More important, the priorities could be improved, since it's a
special case (userspace), hence we could run the notifiers earlier;
user mode linux shouldn't care much with other panic notifiers but
the ordering among the mconsole and arch notifier is important,
given that the arch one effectively triggers a core dump.
Fix that by running the mconsole notifier as the first panic
notifier, followed by the architecture one (that coredumps).
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
V3:
- No changes.
V2:
- Kept the notifier header to avoid implicit usage - thanks
Johannes for the suggestion!
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix bad page state, free inappropriate page in handling dummy
descriptor. iavf_build_skb now has to check not only if rx_buffer is
NULL but also if size is zero, same thing in iavf_clean_rx_irq.
Without this patch driver would free page that will be used
by napi_build_skb.
Fixes: a9f49e0060 ("iavf: Fix handling of dummy receive descriptors")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All uses of reactivate_chan() were removed by
commit 940b241d90 ("um: Remove obsolete reenable_XX
calls"), so remove the declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats
when dump_stack() is used.
Fixes: 5b301409e8 ("UML: add support for KASAN under x86_64")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The current 32 MiB of RAM causes OOMs to appear shortly after
booting in a minimal OpenWrt 22.03 configuration with a
5.10.134 kernel.
Of course, passing a "mem=64M" (from the --help text) parameter
works too, but it produces the following (info) message:
| [ 0.000000] Unknown kernel command line parameters "mem=64M", will be passed to user space.
That's why, I think it would be nicer, if this is working out
of the box again :).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit
part of the early userspace portion:
|[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty
|[...]
|[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read)
|[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read)
|/etc/preinit: line 47: can't create /dev/tty: No such device or address
|/etc/preinit: line 48: can't create /dev/tty: No such device or address
|/etc/preinit: line 58: can't open /dev/tty: No such device or address
|[...] repeated many times
That "/dev/tty" came from the command line (which is automatically
added if no console= parameter was specified for the uml binary).
The TLDP project tells the following about the /dev/tty:
<https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3>
| /dev/tty stands for the controlling terminal (if any) for the current
| process.[...]
| /dev/tty is something like a link to the actually terminal device[..]
The "(if any)" is important here, since it's possible for processes to
not have a controlling terminal.
I think this was a simple typo and the author wanted tty0 there.
CC: Thomas Meyer <thomas@m3y3r.de>
Fixes: d7ffac3363 ("um: stdio_console: Make preferred console")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
