The spectre patching callbacks use cpus_have_final_cap(), and subsequent
patches will make it invalid to call cpus_have_final_cap() before
alternatives patching has completed.
In preparation for said change, this patch modifies the spectre patching
callbacks use cpus_have_cap(). This is not subject to patching, and will
dynamically check the cpu_hwcaps array, which is functionally equivalent
to the existing behaviour.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220912162210.3626215-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The KVM patching callbacks use cpus_have_final_cap() internally within
has_vhe(), and subsequent patches will make it invalid to call
cpus_have_final_cap() before alternatives patching has completed, and
will mean that cpus_have_const_cap() will always fall back to dynamic
checks prior to alternatives patching.
In preparation for said change, this patch modifies the KVM patching
callbacks to use cpus_have_cap() directly. This is not subject to
patching, and will dynamically check the cpu_hwcaps array, which is
functionally equivalent to the existing behaviour.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220912162210.3626215-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently it isn't safe to use cpus_have_cap() from noinstr code as
test_bit() is explicitly instrumented, and were cpus_have_cap() placed
out-of-line, cpus_have_cap() itself could be instrumented.
Make cpus_have_cap() noinstr safe by marking it __always_inline and
using arch_test_bit().
Aside from the prevention of instrumentation, there should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220912162210.3626215-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The documentation for find_vpid() clearly states:
"Must be called with the tasklist_lock or rcu_read_lock() held."
Presently we do neither for find_vpid() instance in bpf_task_fd_query().
Add proper rcu_read_lock/unlock() to fix the issue.
Fixes: 41bdc4b40e ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220912133855.1218900-1-lee@kernel.org
For MTL, when reading from HW, RP0, RP1 (actuall RPe) and RPn freq use an
entirely different set of registers with different fields, bitwidths and
units.
v2: Move MTL check into a separate function (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910143844.1755324-4-ashutosh.dixit@intel.com
Add perf_limit_reasons in debugfs. The upper 16 perf_limit_reasons RW "log"
bits are identical to the lower 16 RO "status" bits except that the "log"
bits remain set until cleared, thereby ensuring the throttling occurrence
is not missed. The clear fop clears the upper 16 "log" bits, the get fop
gets all 32 "log" and "status" bits.
v2: Expand commit message and clarify "log" and "status" bits in
comment (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Tilak Tangudu <tilak.tangudu@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910143844.1755324-2-ashutosh.dixit@intel.com
This, along with the changes already landed in commit 1c66a12ab4
("drm/i915: Handle each GT on init/release and suspend/resume") makes
engines from all GTs actually known to the driver.
To accomplish this we need to sprinkle a lot of for_each_gt calls around
but is otherwise pretty un-eventuful.
v2:
- Consolidate adjacent GT loops in a couple places. (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915232654.3283095-5-matthew.d.roper@intel.com
If we abort driver initialisation in the middle of gt/engine discovery,
some engines will be fully setup and some not. Those incompletely setup
engines only have 'engine->release == NULL' and so will leak any of the
common objects allocated.
v2:
- Drop the destroy_pinned_context() helper for now. It's not really
worth it with just a single callsite at the moment. (Janusz)
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915232654.3283095-2-matthew.d.roper@intel.com
Older GC300 revisions have their power registers at an offset of 0x200
rather than 0x100. Add new gpu_read_power and gpu_write_power functions
to encapsulate accesses to the power addresses and fix the addresses.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The GC300's features register doesn't specify that a 2D pipe is
available, and like the GC600, its idle register reports zero bits where
modules aren't present.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Prevent tcp_read_skb() from flooding the syslog.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is currently possible to select "Generic platform device PATA support"
in two situations:
- architecture allows the generic platform device PATA support and
indicates that with "select HAVE_PATA_PLATFORM".
- if the user claims to be an EXPERT by setting CONFIG_EXPERT to yes
However, there is no use case to have Generic platform device PATA support
in a kernel build if the architecture definition, i.e., the selection of
configs by an architecture, does not support it.
If the architecture definition is wrong, i.e., it just misses a 'select
HAVE_PATA_PLATFORM', then even an expert that configures the kernel build
should not just fix that by overruling the claimed support by an
architecture. If the architecture definition is wrong, the expert should
just provide a patch to correct the architecture definition instead---in
the end, if the user is an expert, sending a quick one-line patch should
not be an issue.
In other words, I do not see the deeper why an expert can overrule the
architecture definition in this case, as the expert may not overrule the
config selections defined by the architecture in the large majority
---or probably all other (modulo some mistakes)---of similar cases.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There are two options for platform device PATA support:
PATA_PLATFORM: Generic platform device PATA support
PATA_OF_PLATFORM: OpenFirmware platform device PATA support
If an architecture allows the generic platform device PATA support, it
shall select HAVE_PATA_PLATFORM. Then, Generic platform device PATA support
is available and can be selected.
If an architecture has OpenFirmware support, which it indicates by
selecting OF, OpenFirmware platform device PATA support is available
and can be selected.
If OpenFirmware platform device PATA support is selected, then the
functionality (code files) from Generic platform device PATA support needs
to be integrated in the kernel build for the OpenFirmware platform device
PATA support to work. Select PATA_PLATFORM in PATA_OF_PLATFORM to make sure
the needed files are added in the build.
So, architectures with OpenFirmware support, do not need to additionally
select HAVE_PATA_PLATFORM. It is only needed by architecture that want the
non-OF pata-platform module.
Reflect this way of intended use of config symbols in the ata Kconfig and
adjust all architecture definitions.
This follows the suggestion from Arnd Bergmann (see Link).
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/4b33bffc-2b6d-46b4-9f1d-d18e55975a5a@www.fastmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
sata_scr_read() could return negative error code on failure. Check the
return value when reading the control register.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Remove the repeated word "Transfer" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There is unneeded word "to" in line 669, so remove it.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cortex-A510's erratum #2658417 causes two BF16 instructions to return the
wrong result in rare circumstances when a pair of A510 CPUs are using
shared neon hardware.
The two instructions affected are BFMMLA and VMMLA, support for these is
indicated by the BF16 HWCAP. Remove it on affected platforms.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220909165938.3931307-4-james.morse@arm.com
[catalin.marinas@arm.com: add revision to the Kconfig help; remove .type]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
get_arm64_ftr_reg() returns the properties of a system register based
on its instruction encoding.
This is needed by erratum workaround in cpu_errata.c to modify the
user-space visible view of id registers.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220909165938.3931307-3-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64 advertises hardware features to user-space via HWCAPs, and by
emulating access to the CPUs id registers. The cpufeature code has a
sanitised system-wide view of an id register, and a sanitised user-space
view of an id register, where some features use their 'safe' value
instead of the hardware value.
It is currently possible for a HWCAP to be advertised where the user-space
view of the id register does not show the feature as supported.
Erratum workaround need to remove both the HWCAP, and the feature from
the user-space view of the id register. This involves duplicating the
code, and spreading it over cpufeature.c and cpu_errata.c.
Make the HWCAP code use the user-space view of id registers. This ensures
the values never diverge, and allows erratum workaround to remove HWCAP
by modifying the user-space view of the id register.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220909165938.3931307-2-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Fix IRQ wakeup and pins for UFS and SDC2 issues on the
Qualcomm SC8180x
- Fix the Rockchip driver to support interrupt on both rising
and falling edges.
- Name the Allwinner A100 R_PIO properly
- Fix several issues with the Ocelot interrupts.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmMkaAgACgkQQRCzN7AZ
XXN5Hg/+Ktv4bK5aN8ldE8csIDHFQ6VCTMk70dqpLVSpbKwuoY5ag1+bmTzcqmUB
zP+ToL9a2CH1rDuDhM+hPHgzjYs/qD+wdm9q1qPSpbtbNEKCvQpWxEtFsBKvcdRy
JfEsK0fyld7MCJBZp9Y1qSpmcKMWaaxXaffcaE2k2fG7/BcrXpnyfa2vHdji64YE
5JXhpA6CtTmEjclVKcRw595Z8o0ml1UBjgRqWX14YQwtL5rj2bf+pWbjkN8w6DRw
WyuFHxY55ww95dkTPcI5VkF5dVdrIiqilxxpiSyyDJxm2s1HUsWOPuAfo3NKyH7y
s9qO5LRblvB3kS8Yuh94gzO/sgXC6D3gKDQp5Hkf6zn2X4tO1M5IH+5mZyeTPbDb
LoGg4AF+E4buK3ztA0oSTe2Ok3aVwtdd4HUaWffHK7dVhET/eVEIup33hq2eY+z+
jHaC26MvP6qL7EDKNg2OY70ok1qGVupuIHz/Km/asBymzgRzotdWNCr1rxl4E3LF
VY7eecXYEyCZQ9C3llaDZvbIuIQPuM0yTsI36i2fdv4aqBtgteW+gSOnPpVpoFSg
j9jo8F57FKcZM28qpXSorPY0TFq2/U/rLwR5Zg8jtguudEtm2izUjiNDY/yiN7Hr
5hWn2CKVi8du7JZKJImOhQ3v/cYWqke4uv2rnwJ/D3jzPGxpFx8=
=i8Nw
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Nothing special, just driver fixes:
- Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm
SC8180x
- Fix the Rockchip driver to support interrupt on both rising and
falling edges.
- Name the Allwinner A100 R_PIO properly
- Fix several issues with the Ocelot interrupts"
* tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix interrupt controller
pinctrl: sunxi: Fix name for A100 R_PIO
pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH
pinctrl: qcom: sc8180x: Fix wrong pin numbers
pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
-----BEGIN PGP SIGNATURE-----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=jBr+
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes for -rc6:
- Fix a mixup of sectors and bytes in the secure erase ioctl
(Mikulas)
- Fix for a bad return value for a non-blocking bio/blk queue enter
call (me)"
* tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
blk-lib: fix blkdev_issue_secure_erase
block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
Using the parent fence instead of the finished fence
to get the job status. This change is to avoid GPU
scheduler timeout error which can cause GPU reset.
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-6-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Here's setting software signaling bit for the stub fence
which is always signaled. If this fence signaling bit is
not set then the AMD GPU scheduler will cause a GPU reset
due to a GPU scheduler cleanup activity timeout.
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-3-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Remove the signaled bit status check because it is returning
early when the fence is already signaled and
__dma_fence_enable_signaling is checking the status of signaled
bit again.
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-2-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
-----BEGIN PGP SIGNATURE-----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=BSte
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small patches:
- Fix using an unsigned type for the return value, introduced in this
release (Pavel)
- Stable fix for a missing check for a fixed file on put (me)"
* tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
io_uring/msg_ring: check file type before putting
io_uring/rw: fix error'ed retry return values
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
i915:
- Revert a display patch around max DP source rate now
that the proper WaEdpLinkRateDataReload is in place
- Fix perf limit reasons bit position
- Fix unclaimmed mmio registers on suspend flow with GuC
- A vma_move_to_active fix for a regression with video decoding
- DP DSP fix
gma500:
- Locking and IRQ fixes
meson:
- OSD1 display fixes
panel-edp:
- Fix Innolux timings
rockchip:
- DP/HDMI fixes
-----BEGIN PGP SIGNATURE-----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=XMTj
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull.
The i915 and misc fixes are fairly regular, but the amdgpu contains
fixes for new hw blocks, the dcn314 specific path hookups and also has
a bunch of fixes for clang stack size warnings which are a bit churny
but fairly straightforward. This means it looks a little larger than
usual.
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
i915:
- Revert a display patch around max DP source rate now that the
proper WaEdpLinkRateDataReload is in place
- Fix perf limit reasons bit position
- Fix unclaimmed mmio registers on suspend flow with GuC
- A vma_move_to_active fix for a regression with video decoding
- DP DSP fix
gma500:
- Locking and IRQ fixes
meson:
- OSD1 display fixes
panel-edp:
- Fix Innolux timings
rockchip:
- DP/HDMI fixes"
* tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu: make sure to init common IP before gmc
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
drm/amd/display: Refactor SubVP calculation to remove FPU
drm/amd/display: Limit user regamma to a valid value
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
drm/amd/display: SW cursor fallback for SubVP
drm/amd/display: Round cursor width up for MALL allocation
drm/amd/display: Correct dram channel width for dcn314
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
drm/amd/display: Hook up DCN314 specific dml implementation
drm/amd/display: Enable dlg and vba compilation for dcn314
drm/amd/display: Fix compilation errors on DCN314
drm/amd/display: Fix divide by zero in DML
...
-----BEGIN PGP SIGNATURE-----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=waB8
-----END PGP SIGNATURE-----
Merge tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four smb3 fixes for stable:
- important fix to revalidate mapping when doing direct writes
- missing spinlock
- two fixes to socket handling
- trivial change to update internal version number for cifs.ko"
* tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: add missing spinlock around tcon refcount
cifs: always initialize struct msghdr smb_msg completely
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
cifs: revalidate mapping when doing direct writes
Instead of hard-coding rising edge as the interrupt trigger, let's rely on
the platform (ACPI, DT) to configure the interrupt properly.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently there are no users of auo_pixcir_ts_platdata in the mainline, and
having it (with legacy gpio numbers) prevents us from converting the driver
to gpiod API, so let's drop it.
If, in the future, someone wants to use this driver on non-device tree,
non-ACPI system, they should use static device properties instead of
platform data.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220914141428.2201784-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
From: Benjamin Poirier <bpoirier@nvidia.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <j.vosburgh@gmail.com>,
Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jiri Pirko <jiri@resnulli.us>, Shuah Khan <shuah@kernel.org>,
Jonathan Toppins <jtoppins@redhat.com>,
linux-kselftest@vger.kernel.org
Subject: [PATCH net v3 0/4] Unsync addresses from ports when stopping aggregated devices
Date: Wed, 7 Sep 2022 16:56:38 +0900 [thread overview]
Message-ID: <20220907075642.475236-1-bpoirier@nvidia.com> (raw)
This series fixes similar problems in the bonding and team drivers.
Because of missing dev_{uc,mc}_unsync() calls, addresses added to
underlying devices may be leftover after the aggregated device is deleted.
Add the missing calls and a few related tests.
v2:
* fix selftest installation, see patch 3
v3:
* Split lacpdu_multicast changes to their own patch, #1
* In ndo_{add,del}_slave methods, only perform address list changes when
the aggregated device is up (patches 2 & 3)
* Add selftest function related to the above change (patch 4)
====================
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team
device is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 3d249d4ca7 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former bond
slaves after a bond has been deleted; see test_LAG_cleanup() in the last
patch in this series.
Add unsync calls, via bond_hw_addr_flush(), at their expected location,
bond_close().
Add dev_mc_add() call to bond_open() to match the above change.
v3:
* When adding or deleting a slave, only sync/unsync, add/del addresses if
the bond is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao says:
====================
net: add tc-testing test cases
For this patchset, test cases of the ctinfo, gate, and xt action modules
are added to the tc-testing test suite. Also add deleting test for
connmark, ife, nat, sample and tunnel_key action modules.
After a test case is added locally, the test result is as follows:
./tdc.py -c action ctinfo
considering category action
considering category ctinfo
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
All test results:
1..12
ok 1 c826 - Add ctinfo action with default setting
ok 2 0286 - Add ctinfo action with dscp
ok 3 4938 - Add ctinfo action with valid cpmark and zone
ok 4 7593 - Add ctinfo action with drop control
ok 5 2961 - Replace ctinfo action zone and action control
ok 6 e567 - Delete ctinfo action with valid index
ok 7 6a91 - Delete ctinfo action with invalid index
ok 8 5232 - List ctinfo actions
ok 9 7702 - Flush ctinfo actions
ok 10 3201 - Add ctinfo action with duplicate index
ok 11 8295 - Add ctinfo action with invalid index
ok 12 3964 - Replace ctinfo action with invalid goto_chain control
./tdc.py -c action gate
considering category gate
considering category action
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
All test results:
1..12
ok 1 5153 - Add gate action with priority and sched-entry
ok 2 7189 - Add gate action with base-time
ok 3 a721 - Add gate action with cycle-time
ok 4 c029 - Add gate action with cycle-time-ext
ok 5 3719 - Replace gate base-time action
ok 6 d821 - Delete gate action with valid index
ok 7 3128 - Delete gate action with invalid index
ok 8 7837 - List gate actions
ok 9 9273 - Flush gate actions
ok 10 c829 - Add gate action with duplicate index
ok 11 3043 - Add gate action with invalid index
ok 12 2930 - Add gate action with cookie
./tdc.py -c action xt
considering category xt
considering category action
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
All test results:
1..8
ok 1 2029 - Add xt action with log-prefix
ok 2 3562 - Replace xt action log-prefix
ok 3 8291 - Delete xt action with valid index
ok 4 5169 - Delete xt action with invalid index
ok 5 7284 - List xt actions
ok 6 5010 - Flush xt actions
ok 7 8437 - Add xt action with duplicate index
ok 8 2837 - Add xt action with invalid index
./tdc.py -c action connmark
considering category action
considering category connmark
Test 2002: Add valid connmark action with defaults
Test 56a5: Add valid connmark action with control pass
Test 7c66: Add valid connmark action with control drop
Test a913: Add valid connmark action with control pipe
Test bdd8: Add valid connmark action with control reclassify
Test b8be: Add valid connmark action with control continue
Test d8a6: Add valid connmark action with control jump
Test aae8: Add valid connmark action with zone argument
Test 2f0b: Add valid connmark action with invalid zone argument
Test 9305: Add connmark action with unsupported argument
Test 71ca: Add valid connmark action and replace it
Test 5f8f: Add valid connmark action with cookie
Test c506: Replace connmark with invalid goto chain control
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
All test results:
1..15
ok 1 2002 - Add valid connmark action with defaults
ok 2 56a5 - Add valid connmark action with control pass
ok 3 7c66 - Add valid connmark action with control drop
ok 4 a913 - Add valid connmark action with control pipe
ok 5 bdd8 - Add valid connmark action with control reclassify
ok 6 b8be - Add valid connmark action with control continue
ok 7 d8a6 - Add valid connmark action with control jump
ok 8 aae8 - Add valid connmark action with zone argument
ok 9 2f0b - Add valid connmark action with invalid zone argument
ok 10 9305 - Add connmark action with unsupported argument
ok 11 71ca - Add valid connmark action and replace it
ok 12 5f8f - Add valid connmark action with cookie
ok 13 c506 - Replace connmark with invalid goto chain control
ok 14 6571 - Delete connmark action with valid index
ok 15 3426 - Delete connmark action with invalid index
./tdc.py -c action ife
considering category action
considering category ife
Test 7682: Create valid ife encode action with mark and pass control
Test ef47: Create valid ife encode action with mark and pipe control
Test df43: Create valid ife encode action with mark and continue control
Test e4cf: Create valid ife encode action with mark and drop control
Test ccba: Create valid ife encode action with mark and reclassify control
Test a1cf: Create valid ife encode action with mark and jump control
Test cb3d: Create valid ife encode action with mark value at 32-bit
maximum
Test 1efb: Create ife encode action with mark value exceeding 32-bit
maximum
Test 95ed: Create valid ife encode action with prio and pass control
Test aa17: Create valid ife encode action with prio and pipe control
Test 74c7: Create valid ife encode action with prio and continue control
Test 7a97: Create valid ife encode action with prio and drop control
Test f66b: Create valid ife encode action with prio and reclassify control
Test 3056: Create valid ife encode action with prio and jump control
Test 7dd3: Create valid ife encode action with prio value at 32-bit
maximum
Test 2ca1: Create ife encode action with prio value exceeding 32-bit
maximum
Test 05bb: Create valid ife encode action with tcindex and pass control
Test ce65: Create valid ife encode action with tcindex and pipe control
Test 09cd: Create valid ife encode action with tcindex and continue control
Test 8eb5: Create valid ife encode action with tcindex and continue control
Test 451a: Create valid ife encode action with tcindex and drop control
Test d76c: Create valid ife encode action with tcindex and reclassify
control
Test e731: Create valid ife encode action with tcindex and jump control
Test b7b8: Create valid ife encode action with tcindex value at 16-bit
maximum
Test d0d8: Create ife encode action with tcindex value exceeding 16-bit
maximum
Test 2a9c: Create valid ife encode action with mac src parameter
Test cf5c: Create valid ife encode action with mac dst parameter
Test 2353: Create valid ife encode action with mac src and mac dst
parameters
Test 552c: Create valid ife encode action with mark and type parameters
Test 0421: Create valid ife encode action with prio and type parameters
Test 4017: Create valid ife encode action with tcindex and type parameters
Test fac3: Create valid ife encode action with index at 32-bit maximum
Test 7c25: Create valid ife decode action with pass control
Test dccb: Create valid ife decode action with pipe control
Test 7bb9: Create valid ife decode action with continue control
Test d9ad: Create valid ife decode action with drop control
Test 219f: Create valid ife decode action with reclassify control
Test 8f44: Create valid ife decode action with jump control
Test 56cf: Create ife encode action with index exceeding 32-bit maximum
Test ee94: Create ife encode action with invalid control
Test b330: Create ife encode action with cookie
Test bbc0: Create ife encode action with invalid argument
Test d54a: Create ife encode action with invalid type argument
Test 7ee0: Create ife encode action with invalid mac src argument
Test 0a7d: Create ife encode action with invalid mac dst argument
Test a0e2: Replace ife encode action with invalid goto chain control
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
All test results:
1..48
ok 1 7682 - Create valid ife encode action with mark and pass control
ok 2 ef47 - Create valid ife encode action with mark and pipe control
ok 3 df43 - Create valid ife encode action with mark and continue control
ok 4 e4cf - Create valid ife encode action with mark and drop control
ok 5 ccba - Create valid ife encode action with mark and reclassify
control
ok 6 a1cf - Create valid ife encode action with mark and jump control
ok 7 cb3d - Create valid ife encode action with mark value at 32-bit
maximum
ok 8 1efb - Create ife encode action with mark value exceeding 32-bit
maximum
ok 9 95ed - Create valid ife encode action with prio and pass control
ok 10 aa17 - Create valid ife encode action with prio and pipe control
ok 11 74c7 - Create valid ife encode action with prio and continue control
ok 12 7a97 - Create valid ife encode action with prio and drop control
ok 13 f66b - Create valid ife encode action with prio and reclassify
control
ok 14 3056 - Create valid ife encode action with prio and jump control
ok 15 7dd3 - Create valid ife encode action with prio value at 32-bit
maximum
ok 16 2ca1 - Create ife encode action with prio value exceeding 32-bit
maximum
ok 17 05bb - Create valid ife encode action with tcindex and pass control
ok 18 ce65 - Create valid ife encode action with tcindex and pipe control
ok 19 09cd - Create valid ife encode action with tcindex and continue
control
ok 20 8eb5 - Create valid ife encode action with tcindex and continue
control
ok 21 451a - Create valid ife encode action with tcindex and drop control
ok 22 d76c - Create valid ife encode action with tcindex and reclassify
control
ok 23 e731 - Create valid ife encode action with tcindex and jump control
ok 24 b7b8 - Create valid ife encode action with tcindex value at 16-bit
maximum
ok 25 d0d8 - Create ife encode action with tcindex value exceeding 16-bit
maximum
ok 26 2a9c - Create valid ife encode action with mac src parameter
ok 27 cf5c - Create valid ife encode action with mac dst parameter
ok 28 2353 - Create valid ife encode action with mac src and mac dst
parameters
ok 29 552c - Create valid ife encode action with mark and type parameters
ok 30 0421 - Create valid ife encode action with prio and type parameters
ok 31 4017 - Create valid ife encode action with tcindex and type
parameters
ok 32 fac3 - Create valid ife encode action with index at 32-bit maximum
ok 33 7c25 - Create valid ife decode action with pass control
ok 34 dccb - Create valid ife decode action with pipe control
ok 35 7bb9 - Create valid ife decode action with continue control
ok 36 d9ad - Create valid ife decode action with drop control
ok 37 219f - Create valid ife decode action with reclassify control
ok 38 8f44 - Create valid ife decode action with jump control
ok 39 56cf - Create ife encode action with index exceeding 32-bit maximum
ok 40 ee94 - Create ife encode action with invalid control
ok 41 b330 - Create ife encode action with cookie
ok 42 bbc0 - Create ife encode action with invalid argument
ok 43 d54a - Create ife encode action with invalid type argument
ok 44 7ee0 - Create ife encode action with invalid mac src argument
ok 45 0a7d - Create ife encode action with invalid mac dst argument
ok 46 a0e2 - Replace ife encode action with invalid goto chain control
ok 47 a972 - Delete ife encode action with valid index
ok 48 1272 - Delete ife encode action with invalid index
./tdc.py -c action nat
considering category action
considering category nat
Test 7565: Add nat action on ingress with default control action
Test fd79: Add nat action on ingress with pipe control action
Test eab9: Add nat action on ingress with continue control action
Test c53a: Add nat action on ingress with reclassify control action
Test 76c9: Add nat action on ingress with jump control action
Test 24c6: Add nat action on ingress with drop control action
Test 2120: Add nat action on ingress with maximum index value
Test 3e9d: Add nat action on ingress with invalid index value
Test f6c9: Add nat action on ingress with invalid IP address
Test be25: Add nat action on ingress with invalid argument
Test a7bd: Add nat action on ingress with DEFAULT IP address
Test ee1e: Add nat action on ingress with ANY IP address
Test 1de8: Add nat action on ingress with ALL IP address
Test 8dba: Add nat action on egress with default control action
Test 19a7: Add nat action on egress with pipe control action
Test f1d9: Add nat action on egress with continue control action
Test 6d4a: Add nat action on egress with reclassify control action
Test b313: Add nat action on egress with jump control action
Test d9fc: Add nat action on egress with drop control action
Test a895: Add nat action on egress with DEFAULT IP address
Test 2572: Add nat action on egress with ANY IP address
Test 37f3: Add nat action on egress with ALL IP address
Test 6054: Add nat action on egress with cookie
Test 79d6: Add nat action on ingress with cookie
Test 4b12: Replace nat action with invalid goto chain control
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
All test results:
1..27
ok 1 7565 - Add nat action on ingress with default control action
ok 2 fd79 - Add nat action on ingress with pipe control action
ok 3 eab9 - Add nat action on ingress with continue control action
ok 4 c53a - Add nat action on ingress with reclassify control action
ok 5 76c9 - Add nat action on ingress with jump control action
ok 6 24c6 - Add nat action on ingress with drop control action
ok 7 2120 - Add nat action on ingress with maximum index value
ok 8 3e9d - Add nat action on ingress with invalid index value
ok 9 f6c9 - Add nat action on ingress with invalid IP address
ok 10 be25 - Add nat action on ingress with invalid argument
ok 11 a7bd - Add nat action on ingress with DEFAULT IP address
ok 12 ee1e - Add nat action on ingress with ANY IP address
ok 13 1de8 - Add nat action on ingress with ALL IP address
ok 14 8dba - Add nat action on egress with default control action
ok 15 19a7 - Add nat action on egress with pipe control action
ok 16 f1d9 - Add nat action on egress with continue control action
ok 17 6d4a - Add nat action on egress with reclassify control action
ok 18 b313 - Add nat action on egress with jump control action
ok 19 d9fc - Add nat action on egress with drop control action
ok 20 a895 - Add nat action on egress with DEFAULT IP address
ok 21 2572 - Add nat action on egress with ANY IP address
ok 22 37f3 - Add nat action on egress with ALL IP address
ok 23 6054 - Add nat action on egress with cookie
ok 24 79d6 - Add nat action on ingress with cookie
ok 25 4b12 - Replace nat action with invalid goto chain control
ok 26 b811 - Delete nat action with valid index
ok 27 a521 - Delete nat action with invalid index
./tdc.py -c action sample
considering category action
considering category sample
Test 9784: Add valid sample action with mandatory arguments
Test 5c91: Add valid sample action with mandatory arguments and continue
control action
Test 334b: Add valid sample action with mandatory arguments and drop
control action
Test da69: Add valid sample action with mandatory arguments and reclassify
control action
Test 13ce: Add valid sample action with mandatory arguments and pipe
control action
Test 1886: Add valid sample action with mandatory arguments and jump
control action
Test 7571: Add sample action with invalid rate
Test b6d4: Add sample action with mandatory arguments and invalid control
action
Test a874: Add invalid sample action without mandatory arguments
Test ac01: Add invalid sample action without mandatory argument rate
Test 4203: Add invalid sample action without mandatory argument group
Test 14a7: Add invalid sample action without mandatory argument group
Test 8f2e: Add valid sample action with trunc argument
Test 45f8: Add sample action with maximum rate argument
Test ad0c: Add sample action with maximum trunc argument
Test 83a9: Add sample action with maximum group argument
Test ed27: Add sample action with invalid rate argument
Test 2eae: Add sample action with invalid group argument
Test 6ff3: Add sample action with invalid trunc size
Test 2b2a: Add sample action with invalid index
Test dee2: Add sample action with maximum allowed index
Test 560e: Add sample action with cookie
Test 704a: Replace existing sample action with new rate argument
Test 60eb: Replace existing sample action with new group argument
Test 2cce: Replace existing sample action with new trunc argument
Test 59d1: Replace existing sample action with new control argument
Test 0a6e: Replace sample action with invalid goto chain control
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
All test results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue
control action
ok 3 334b - Add valid sample action with mandatory arguments and drop
control action
ok 4 da69 - Add valid sample action with mandatory arguments and
reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe
control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump
control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control
action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index
./tdc.py -c action tunnel_key
considering category tunnel_key
considering category action
Test 2b11: Add tunnel_key set action with mandatory parameters
Test dc6b: Add tunnel_key set action with missing mandatory src_ip
parameter
Test 7f25: Add tunnel_key set action with missing mandatory dst_ip
parameter
Test a5e0: Add tunnel_key set action with invalid src_ip parameter
Test eaa8: Add tunnel_key set action with invalid dst_ip parameter
Test 3b09: Add tunnel_key set action with invalid id parameter
Test 9625: Add tunnel_key set action with invalid dst_port parameter
Test 05af: Add tunnel_key set action with optional dst_port parameter
Test da80: Add tunnel_key set action with index at 32-bit maximum
Test d407: Add tunnel_key set action with index exceeding 32-bit maximum
Test 5cba: Add tunnel_key set action with id value at 32-bit maximum
Test e84a: Add tunnel_key set action with id value exceeding 32-bit
maximum
Test 9c19: Add tunnel_key set action with dst_port value at 16-bit maximum
Test 3bd9: Add tunnel_key set action with dst_port value exceeding 16-bit
maximum
Test 68e2: Add tunnel_key unset action
Test 6192: Add tunnel_key unset continue action
Test 061d: Add tunnel_key set continue action with cookie
Test 8acb: Add tunnel_key set continue action with invalid cookie
Test a07e: Add tunnel_key action with no set/unset command specified
Test b227: Add tunnel_key action with csum option
Test 58a7: Add tunnel_key action with nocsum option
Test 2575: Add tunnel_key action with not-supported parameter
Test 7a88: Add tunnel_key action with cookie parameter
Test 4f20: Add tunnel_key action with a single geneve option parameter
Test e33d: Add tunnel_key action with multiple geneve options parameter
Test 0778: Add tunnel_key action with invalid class geneve option
parameter
Test 4ae8: Add tunnel_key action with invalid type geneve option parameter
Test 4039: Add tunnel_key action with short data length geneve option
parameter
Test 26a6: Add tunnel_key action with non-multiple of 4 data length geneve
option parameter
Test f44d: Add tunnel_key action with incomplete geneve options parameter
Test 7afc: Replace tunnel_key set action with all parameters
Test 364d: Replace tunnel_key set action with all parameters and cookie
Test 937c: Fetch all existing tunnel_key actions
Test 6783: Flush all existing tunnel_key actions
Test 8242: Replace tunnel_key set action with invalid goto chain
Test 0cd2: Add tunnel_key set action with no_percpu flag
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
All test results:
1..38
ok 1 2b11 - Add tunnel_key set action with mandatory parameters
ok 2 dc6b - Add tunnel_key set action with missing mandatory src_ip
parameter
ok 3 7f25 - Add tunnel_key set action with missing mandatory dst_ip
parameter
ok 4 a5e0 - Add tunnel_key set action with invalid src_ip parameter
ok 5 eaa8 - Add tunnel_key set action with invalid dst_ip parameter
ok 6 3b09 - Add tunnel_key set action with invalid id parameter
ok 7 9625 - Add tunnel_key set action with invalid dst_port parameter
ok 8 05af - Add tunnel_key set action with optional dst_port parameter
ok 9 da80 - Add tunnel_key set action with index at 32-bit maximum
ok 10 d407 - Add tunnel_key set action with index exceeding 32-bit maximum
ok 11 5cba - Add tunnel_key set action with id value at 32-bit maximum
ok 12 e84a - Add tunnel_key set action with id value exceeding 32-bit
maximum
ok 13 9c19 - Add tunnel_key set action with dst_port value at 16-bit
maximum
ok 14 3bd9 - Add tunnel_key set action with dst_port value exceeding
16-bit maximum
ok 15 68e2 - Add tunnel_key unset action
ok 16 6192 - Add tunnel_key unset continue action
ok 17 061d - Add tunnel_key set continue action with cookie
ok 18 8acb - Add tunnel_key set continue action with invalid cookie
ok 19 a07e - Add tunnel_key action with no set/unset command specified
ok 20 b227 - Add tunnel_key action with csum option
ok 21 58a7 - Add tunnel_key action with nocsum option
ok 22 2575 - Add tunnel_key action with not-supported parameter
ok 23 7a88 - Add tunnel_key action with cookie parameter
ok 24 4f20 - Add tunnel_key action with a single geneve option parameter
ok 25 e33d - Add tunnel_key action with multiple geneve options parameter
ok 26 0778 - Add tunnel_key action with invalid class geneve option
parameter
ok 27 4ae8 - Add tunnel_key action with invalid type geneve option
parameter
ok 28 4039 - Add tunnel_key action with short data length geneve option
parameter
ok 29 26a6 - Add tunnel_key action with non-multiple of 4 data length
geneve option parameter
ok 30 f44d - Add tunnel_key action with incomplete geneve options
parameter
ok 31 7afc - Replace tunnel_key set action with all parameters
ok 32 364d - Replace tunnel_key set action with all parameters and cookie
ok 33 937c - Fetch all existing tunnel_key actions
ok 34 6783 - Flush all existing tunnel_key actions
ok 35 8242 - Replace tunnel_key set action with invalid goto chain
ok 36 0cd2 - Add tunnel_key set action with no_percpu flag
ok 37 3671 - Delete tunnel_key set action with valid index
ok 38 8597 - Delete tunnel_key set action with invalid index
====================
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
