To prepare for STATX_DIOALIGN support, make two changes to
fscrypt_dio_supported().
First, remove the filesystem-block-alignment check and make the
filesystems handle it instead. It previously made sense to have it in
fs/crypto/; however, to support STATX_DIOALIGN the alignment restriction
would have to be returned to filesystems. It ends up being simpler if
filesystems handle this part themselves, especially for f2fs which only
allows fs-block-aligned DIO in the first place.
Second, make fscrypt_dio_supported() work on inodes whose encryption key
hasn't been set up yet, by making it set up the key if needed. This is
required for statx(), since statx() doesn't require a file descriptor.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-4-ebiggers@kernel.org
Add support for STATX_DIOALIGN to block devices, so that direct I/O
alignment restrictions are exposed to userspace in a generic way.
Note that this breaks the tradition of stat operating only on the block
device node, not the block device itself. However, it was felt that
doing this is preferable, in order to make the interface useful and
avoid needing separate interfaces for regular files and block devices.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-3-ebiggers@kernel.org
Traditionally, the conditions for when DIO (direct I/O) is supported
were fairly simple. For both block devices and regular files, DIO had
to be aligned to the logical block size of the block device.
However, due to filesystem features that have been added over time (e.g.
multi-device support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode), the conditions
for when DIO is allowed on a regular file have gotten increasingly
complex. Whether a particular regular file supports DIO, and with what
alignment, can depend on various file attributes and filesystem mount
options, as well as which block device(s) the file's data is located on.
Moreover, the general rule of DIO needing to be aligned to the block
device's logical block size was recently relaxed to allow user buffers
(but not file offsets) aligned to the DMA alignment instead. See
commit bf8d08532b ("iomap: add support for dma aligned direct-io").
XFS has an ioctl XFS_IOC_DIOINFO that exposes DIO alignment information.
Uplifting this to the VFS is one possibility. However, as discussed
(https://lore.kernel.org/linux-fsdevel/20220120071215.123274-1-ebiggers@kernel.org/T/#u),
this ioctl is rarely used and not known to be used outside of
XFS-specific code. It was also never intended to indicate when a file
doesn't support DIO at all, nor was it intended for block devices.
Therefore, let's expose this information via statx(). Add the
STATX_DIOALIGN flag and two new statx fields associated with it:
* stx_dio_mem_align: the alignment (in bytes) required for user memory
buffers for DIO, or 0 if DIO is not supported on the file.
* stx_dio_offset_align: the alignment (in bytes) required for file
offsets and I/O segment lengths for DIO, or 0 if DIO is not supported
on the file. This will only be nonzero if stx_dio_mem_align is
nonzero, and vice versa.
Note that as with other statx() extensions, if STATX_DIOALIGN isn't set
in the returned statx struct, then these new fields won't be filled in.
This will happen if the file is neither a regular file nor a block
device, or if the file is a regular file and the filesystem doesn't
support STATX_DIOALIGN. It might also happen if the caller didn't
include STATX_DIOALIGN in the request mask, since statx() isn't required
to return unrequested information.
This commit only adds the VFS-level plumbing for STATX_DIOALIGN. For
regular files, individual filesystems will still need to add code to
support it. For block devices, a separate commit will wire it up too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-2-ebiggers@kernel.org
Smatch checker complains that 'secretmem_mnt' dereferencing possible
ERR_PTR(). Let the function return if 'secretmem_mnt' is ERR_PTR, to
avoid deferencing it.
Link: https://lkml.kernel.org/r/20220904074647.GA64291@cloud-MacBookPro
Fixes: 1507f51255 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Binyi Han <dantengknight@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foudation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These two predicates are the same for file pages, but are not the same for
anonymous pages.
Link: https://lkml.kernel.org/r/20220902192639.1737108-3-willy@infradead.org
Fixes: 07f67a8ded ("mm/vmscan: convert shrink_active_list() to use a folio")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Folio fixes for 6.0".
This patch (of 2):
The recent folio conversion changed the VM_BUG_ON() to dump the folio
we're storing instead of the entry we retrieved. This was a mistake;
the entry we retrieved is the more interesting page to dump.
Link: https://lkml.kernel.org/r/20220902192639.1737108-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20220902192639.1737108-2-willy@infradead.org
Fixes: ceff9d3354 ("mm/swap: convert __delete_from_swap_cache() to a folio")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When gfp_types.h was split from gfp.h, it broke the radix test suite. Fix
the test suite by using gfp_types.h in the tools gfp.h header.
Link: https://lkml.kernel.org/r/20220902191923.1735933-1-willy@infradead.org
Fixes: cb5a065b4e (headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. Fix this up by properly calling
dput().
Link: https://lkml.kernel.org/r/20220902191149.112434-1-sj@kernel.org
Fixes: 75c1c2b53c ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
migrate_vma_setup() has a fast path in migrate_vma_collect_pmd() that
installs migration entries directly if it can lock the migrating page.
When removing a dirty pte the dirty bit is supposed to be carried over to
the underlying page to prevent it being lost.
Currently migrate_vma_*() can only be used for private anonymous mappings.
That means loss of the dirty bit usually doesn't result in data loss
because these pages are typically not file-backed. However pages may be
backed by swap storage which can result in data loss if an attempt is made
to migrate a dirty page that doesn't yet have the PageDirty flag set.
In this case migration will fail due to unexpected references but the
dirty pte bit will be lost. If the page is subsequently reclaimed data
won't be written back to swap storage as it is considered uptodate,
resulting in data loss if the page is subsequently accessed.
Prevent this by copying the dirty bit to the page when removing the pte to
match what try_to_migrate_one() does.
Link: https://lkml.kernel.org/r/dd48e4882ce859c295c1a77612f66d198b0403f9.1662078528.git-series.apopple@nvidia.com
Fixes: 8c3328f1f3 ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we only call flush_cache_page() for the anon_exclusive case,
however in both cases we clear the pte so should flush the cache.
Link: https://lkml.kernel.org/r/5676f30436ab71d1a587ac73f835ed8bd2113ff5.1662078528.git-series.apopple@nvidia.com
Fixes: 8c3328f1f3 ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When clearing a PTE the TLB should be flushed whilst still holding the PTL
to avoid a potential race with madvise/munmap/etc. For example consider
the following sequence:
CPU0 CPU1
---- ----
migrate_vma_collect_pmd()
pte_unmap_unlock()
madvise(MADV_DONTNEED)
-> zap_pte_range()
pte_offset_map_lock()
[ PTE not present, TLB not flushed ]
pte_unmap_unlock()
[ page is still accessible via stale TLB ]
flush_tlb_range()
In this case the page may still be accessed via the stale TLB entry after
madvise returns. Fix this by flushing the TLB while holding the PTL.
Fixes: 8c3328f1f3 ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Link: https://lkml.kernel.org/r/9f801e9d8d830408f2ca27821f606e09aa856899.1662078528.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 4867fbbdd6 ("x86/mm: move protection_map[] inside the platform")
moved accesses to protection_map[] from mem_encrypt_amd.c to pgprot.c. As
a result, the accesses are now targets of KASAN (and other
instrumentations), leading to the crash during the boot process.
Disable the instrumentations for pgprot.c like commit 67bb8e999e
("x86/mm: Disable various instrumentations of mm/mem_encrypt.c and
mm/tlb.c").
Before this patch, my AMD machine cannot boot since v6.0-rc1 with KASAN
enabled, without anything printed. After the change, it successfully
boots up.
Fixes: 4867fbbdd6 ("x86/mm: move protection_map[] inside the platform")
Link: https://lkml.kernel.org/r/20220824084726.2174758-1-naohiro.aota@wdc.com
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the case where a filesystem is polled to take over the memory failure
and receives -EOPNOTSUPP it indicates that page->index and page->mapping
are valid for reverse mapping the failure address. Introduce
FSDAX_INVALID_PGOFF to distinguish when add_to_kill() is being called from
mf_dax_kill_procs() by a filesytem vs the typical memory_failure() path.
Otherwise, vma_pgoff_address() is called with an invalid fsdax_pgoff which
then trips this failing signature:
kernel BUG at mm/memory-failure.c:319!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 13 PID: 1262 Comm: dax-pmd Tainted: G OE N 6.0.0-rc2+ #62
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:add_to_kill.cold+0x19d/0x209
[..]
Call Trace:
<TASK>
collect_procs.part.0+0x2c4/0x460
memory_failure+0x71b/0xba0
? _printk+0x58/0x73
do_madvise.part.0.cold+0xaf/0xc5
Link: https://lkml.kernel.org/r/166153429427.2758201.14605968329933175594.stgit@dwillia2-xfh.jf.intel.com
Fixes: c36e202495 ("mm: introduce mf_dax_kill_procs() for fsdax case")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The SB_BORN flag is stored in the vfs superblock, not xfs_sb.
Link: https://lkml.kernel.org/r/166153428094.2758201.7936572520826540019.stgit@dwillia2-xfh.jf.intel.com
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, xfs, dax: Fixes for memory_failure() handling".
I failed to run the memory error injection section of the ndctl test suite
on linux-next prior to the merge window and as a result some bugs were
missed. While the new enabling targeted reflink enabled XFS filesystems
the bugs cropped up in the surrounding cases of DAX error injection on
ext4-fsdax and device-dax.
One new assumption / clarification in this set is the notion that if a
filesystem's ->notify_failure() handler returns -EOPNOTSUPP, then it must
be the case that the fsdax usage of page->index and page->mapping are
valid. I am fairly certain this is true for xfs_dax_notify_failure(), but
would appreciate another set of eyes.
This patch (of 4):
XFS always registers dax_holder_operations regardless of whether the
filesystem is capable of handling the notifications. The expectation is
that if the notify_failure handler cannot run then there are no scenarios
where it needs to run. In other words the expected semantic is that
page->index and page->mapping are valid for memory_failure() when the
conditions that cause -EOPNOTSUPP in xfs_dax_notify_failure() are present.
A fallback to the generic memory_failure() path is expected so do not warn
when that happens.
Link: https://lkml.kernel.org/r/166153426798.2758201.15108211981034512993.stgit@dwillia2-xfh.jf.intel.com
Link: https://lkml.kernel.org/r/166153427440.2758201.6709480562966161512.stgit@dwillia2-xfh.jf.intel.com
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patrick Daly reported the following problem;
NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - before offline operation
[0] - ZONE_MOVABLE
[1] - ZONE_NORMAL
[2] - NULL
For a GFP_KERNEL allocation, alloc_pages_slowpath() will save the
offset of ZONE_NORMAL in ac->preferred_zoneref. If a concurrent
memory_offline operation removes the last page from ZONE_MOVABLE,
build_all_zonelists() & build_zonerefs_node() will update
node_zonelists as shown below. Only populated zones are added.
NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - after offline operation
[0] - ZONE_NORMAL
[1] - NULL
[2] - NULL
The race is simple -- page allocation could be in progress when a memory
hot-remove operation triggers a zonelist rebuild that removes zones. The
allocation request will still have a valid ac->preferred_zoneref that is
now pointing to NULL and triggers an OOM kill.
This problem probably always existed but may be slightly easier to trigger
due to 6aa303defb ("mm, vmscan: only allocate and reclaim from zones
with pages managed by the buddy allocator") which distinguishes between
zones that are completely unpopulated versus zones that have valid pages
not managed by the buddy allocator (e.g. reserved, memblock, ballooning
etc). Memory hotplug had multiple stages with timing considerations
around managed/present page updates, the zonelist rebuild and the zone
span updates. As David Hildenbrand puts it
memory offlining adjusts managed+present pages of the zone
essentially in one go. If after the adjustments, the zone is no
longer populated (present==0), we rebuild the zone lists.
Once that's done, we try shrinking the zone (start+spanned
pages) -- which results in zone_start_pfn == 0 if there are no
more pages. That happens *after* rebuilding the zonelists via
remove_pfn_range_from_zone().
The only requirement to fix the race is that a page allocation request
identifies when a zonelist rebuild has happened since the allocation
request started and no page has yet been allocated. Use a seqlock_t to
track zonelist updates with a lockless read-side of the zonelist and
protecting the rebuild and update of the counter with a spinlock.
[akpm@linux-foundation.org: make zonelist_update_seq static]
Link: https://lkml.kernel.org/r/20220824110900.vh674ltxmzb3proq@techsingularity.net
Fixes: 6aa303defb ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Patrick Daly <quic_pdaly@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The Rockchip rk3399 TRM mentions that pd_sdioaudio includes
sdio, spi, i2s and spdif. Add a power-domains property to
to match reality with spi-rockchip.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/12af4fe6-4d35-cb4a-f5f6-06e3aba990cb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
-----BEGIN PGP SIGNATURE-----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=FJba
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
* tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
mksysmap: Fix the mismatch of 'L0' symbols in System.map
kbuild: disable header exports for UML in a straightforward way
scripts/extract-ikconfig: add zstd compression support
scripts: remove obsolete gcc-ld script
The driver has a lot of sparse warnings for using 0 as a NULL
pointer when NULL would be appropriate. Change the 0 values
to NULL to fix the warnings, some of which are shown here:
drivers/power/supply/bq27xxx_battery.c:984:23: warning: Using plain integer as NULL pointer
drivers/power/supply/bq27xxx_battery.c:985:23: warning: Using plain integer as NULL pointer
drivers/power/supply/bq27xxx_battery.c:986:23: warning: Using plain integer as NULL pointer
drivers/power/supply/bq27xxx_battery.c:987:23: warning: Using plain integer as NULL pointer
drivers/power/supply/bq27xxx_battery.c:988:23: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The bq27xxx_dm_reg_ptr() should return a __be16 as the result
is being passed to be16_to_cpup() to convert to the proper
cpu endian value. Move to using __be16 as appropriate to fix
the following sparse warnings:
drivers/power/supply/bq27xxx_battery.c:1293:26: warning: incorrect type in argument 1 (different base types)
drivers/power/supply/bq27xxx_battery.c:1293:26: expected restricted __be16 const [usertype] *p
drivers/power/supply/bq27xxx_battery.c:1293:26: got unsigned short [usertype] *prev
drivers/power/supply/bq27xxx_battery.c:1304:17: warning: incorrect type in argument 1 (different base types)
drivers/power/supply/bq27xxx_battery.c:1304:17: expected restricted __be16 const [usertype] *p
drivers/power/supply/bq27xxx_battery.c:1304:17: got unsigned short [usertype] *prev
drivers/power/supply/bq27xxx_battery.c:1316:15: warning: incorrect type in assignment (different base types)
drivers/power/supply/bq27xxx_battery.c:1316:15: expected unsigned short [usertype]
drivers/power/supply/bq27xxx_battery.c:1316:15: got restricted __be16 [usertype]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Let user set input current limit via sysfs. This is useful in case there
are multiple chargers connected to the device, each of which with its own
arbitrary maximum current which it can provide, some of which may provide
more than the default 500mA. In that case, userspace can listen for plug
events generated by each charger and adjust the current limit accordingly,
e.g. to permit battery to charge faster.
Note that the IINLIM is reset every time the bq25890 is disconnected from
a charger, so the userspace must adjust the limit repeatly on every plug
event.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When bq25890_pump_express_work encounters an errors disable
the PUMPX_EN flag, just like the work does on a successful exit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Replace vkms_formats macro for fixed-point operations with functions
from drm/drm_fixed.h to do the same job and fix 32-bit compilation
errors.
v2:
- don't cast results to s32 (Igor)
- add missing drm_fixp2int conversion (Igor)
Fixes: a19c2ac9858 ("drm: vkms: Add support to the RGB565 format")
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910190303.682897-1-mwen@igalia.com
drm-misc-next for v6.1-rc1:
[airlied - fix sun4i_tv build]
UAPI Changes:
- Hide unregistered connectors from GETCONNECTOR ioctl.
- drm/virtio no longer advertises LINEAR modifier, as it doesn't work.
-
Cross-subsystem Changes:
- Fix GPF in udmabuf failure path.
Core Changes:
- Rework TTM placement to use intersect/compatible functions.
- Drop legacy DP-MST support.
- More DP-MST related fixes, and move all state into atomic.
- Make DRM_MIPI_DBI select DRM_KMS_HELPER.
- Add audio_infoframe packing for DP.
- Add logging when some atomic check functions fail.
- Assorted documentation updates and fixes.
Driver Changes:
- Assorted cleanups and fixes in msm, lcdif, nouveau, virtio,
panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via,
bochs, qxl, sun4i.
- Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels.
- Improve DP-MST modeset state handling in amdgpu, nouveau, i915.
- Drop DP-MST from radeon driver, it was broken and only user of legacy
DP-MST.
- Handle unplugging better in vc4.
- Simplify drm cmdparser tests.
- Add DP support to ti-sn65dsi86.
- Add MT8195 DP support to mediatek.
- Support RGB565, XRGB64, and ARGB64 formats in vkms.
- Convert sun4i tv support to atomic.
- Refactor vc4/vec TV Modesetting, and fix timings.
- Use atomic helpers instead of simple display helpers in ssd130x.
Maintainer changes:
- Add Douglas Anderson as reviewer for panel-edp.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com
Rename function MACvSetCurrAC0DescAddrEx to vt6655_mac_set_curr_ac_0...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary declaration of function and make function static. Remove
unnecessary line break.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/dc3f83dfa8b83a02ed95da3cfb71c0139ba8b674.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSetCurrTx0DescAddrEx to vt6655_mac_set_curr_tx_0_...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary declaration of function and make function static. Remove
unnecessary line break.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4337deed83e1443ebf93c5591e17f5c6dfe0cf55.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACbSafeSoftwareReset to vt6655_mac_save_soft_reset and
abyTmpRegData to tmp_reg_data to avoid CamelCase which is not accepted by
checkpatch.pl. Remove return value bRetVal as it is unused by the calling
functions. Remove unnecessary declaration of function and make function
static. Change declaration of tmp_reg_data to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/540a684266610f7618b3ef6000d4699d065c8e6f.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvRestoreContext to vt6655_mac_restore_context to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static. Change declaration of
cxt_buf to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/3d215bbf1675fd093c9b31fbf3b29ce09432ab27.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSaveContext to vt6655_mac_save_context to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static. Change declaration of
cxt_buf to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f514711695f1eafde9996edcc246da2adcd5f9c5.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function MACvSetLoopbackMode to vt6655_mac_set_loopback_mode and
byLoopbackMode to loopback_mode to avoid CamelCase which is not accepted
by checkpatch.pl. Remove unnecessary declaration of function and made
function static. Change declaration of loopback_mode to shorten code and
remove unnecessary line break.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/02ce61620e13eb7fd24833e59a288f52bf5b9730.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtw_is_scan_deny macro returns false. Remove the macro and resulting
dead code.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220910180236.489808-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>