Commit graph

1,188,286 commits

Author SHA1 Message Date
Wang Hai
f612466ebe net/sched: fix netdevice reference leaks in attach_default_qdiscs()
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.

In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.

The following is the bug log:

veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
 qdisc_alloc+0x12e/0x210
 qdisc_create_dflt+0x62/0x140
 attach_one_default_qdisc.constprop.41+0x44/0x70
 dev_activate+0x128/0x290
 __dev_open+0x12a/0x190
 __dev_change_flags+0x1a2/0x1f0
 dev_change_flags+0x23/0x60
 do_setlink+0x332/0x1150
 __rtnl_newlink+0x52f/0x8e0
 rtnl_newlink+0x43/0x70
 rtnetlink_rcv_msg+0x140/0x3b0
 netlink_rcv_skb+0x50/0x100
 netlink_unicast+0x1bb/0x290
 netlink_sendmsg+0x37c/0x4e0
 sock_sendmsg+0x5f/0x70
 ____sys_sendmsg+0x208/0x280

Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.

Fixes: bf6dba76d2 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30 15:10:08 +02:00
Ming Qian
996f4e89fa media: amphion: adjust the encoder's value range of gop size
adjust the value range of gop size from [0, 65535] to [1, 8000].
when the gop size is set to a too large value,
it may affect the encoded picture quality.
so constrain it to a reasonable range.

Fixes: 0401e659c1 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 15:01:06 +02:00
Ming Qian
f7fd6c318c media: amphion: insert picture startcode after seek for vc1g format
For format vc1, the amphion vpu requires driver to
help insert some custom startcode before sequence and frame.
the startcode is different for vc1l and vc1g format.

But the sequence startcode is only needed at the beginning,
and it's not expected after seek.
driver need to treat the codec header and the first frame after seek
as a normal frame, and insert picture startcode for it.

In previous patch, I just fix it for vc1l format,
and should fix the similar issue for vc1g too.

Fixes: e670f5d672 (media: amphion: only insert the first sequence startcode for vc1l format)
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:49:47 +02:00
Dmitry Osipenko
91db7a3fc7 media: cedrus: Fix endless loop in cedrus_h265_skip_bits()
The busy status bit may never de-assert if number of programmed skip
bits is incorrect, resulting in a kernel hang because the bit is polled
endlessly in the code. Fix it by adding timeout for the bit-polling.
This problem is reproducible by setting the data_bit_offset field of
the HEVC slice params to a wrong value by userspace.

Cc: stable@vger.kernel.org
Fixes: 7678c54626 (media: cedrus: Fix decoding for some HEVC videos)
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:48:45 +02:00
Dmitry Osipenko
708938f849 media: cedrus: Set the platform driver data earlier
The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.

Cc: stable@vger.kernel.org
Fixes: 50e761516f (media: platform: Add Cedrus VPU decoder driver)
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:48:14 +02:00
Andrzej Hajda
13cc5123e9 drm/i915/selftests: allow misaligned_pin test work with unmappable memory
In case of Small BAR configurations stolen local memory can be unmappable.
Since the test does not touch the memory, passing I915_BO_ALLOC_GPU_ONLY
flag to i915_gem_object_create_region, will prevent -ENOSPC error from
_i915_gem_object_stolen_init.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6565
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825154239.52343-1-andrzej.hajda@intel.com
2022-08-30 13:45:21 +01:00
Nicolas Dufresne
fe8b81fde6 media: cedrus: Fix watchdog race condition
The watchdog needs to be scheduled before we trigger the decode
operation, otherwise there is a risk that the decoder IRQ will be
called before we have schedule the watchdog. As a side effect, the
watchdog would never be cancelled and its function would be called
at an inappropriate time.

This was observed while running Fluster with GStreamer as a backend.
Some programming error would cause the decoder IRQ to be call very
quickly after the trigger. Later calls into the driver would deadlock
due to the unbalanced state.

Cc: stable@vger.kernel.org
Fixes: 7c38a551bd ("media: cedrus: Add watchdog for job completion")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:45:10 +02:00
Ezequiel Garcia
2801f6f30f media: videobuf2: Remove vb2_find_timestamp()
Now that we've transitioned all users to vb2_find_buffer API,
remove the unused vb2_find_timestamp().

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:44:45 +02:00
Ezequiel Garcia
e21cde4016 media: cedrus: Use vb2_find_buffer
Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:44:18 +02:00
Hirokazu Honda
e7bfdf0a85 media: mediatek: vcodec: Skip non CBR bitrate mode
V4L2_MPEG_VIDEO_BITRATE_MODE_CBR is the only bitrate mode supported
by the mediatek driver. The other bitrates must be skipped in
QUERY_MENU.

Fixes: d8e8aa866e ("media: mediatek: vcodec: Report supported bitrate modes")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:41:15 +02:00
Yunfei Dong
b813e39a69 media: mediatek: vcodec: Add mt8188 encoder's chip name
Getting mt8188's chip name according to encoder compatible name.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:40:47 +02:00
Fedor Pchelkin
902e02ea93 tty: n_gsm: avoid call of sleeping functions from atomic context
Syzkaller reports the following problem:

BUG: sleeping function called from invalid context at kernel/printk/printk.c:2347
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1105, name: syz-executor423
3 locks held by syz-executor423/1105:
 #0: ffff8881468b9098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x90 drivers/tty/tty_ldisc.c:266
 #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: tty_write_lock drivers/tty/tty_io.c:952 [inline]
 #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: do_tty_write drivers/tty/tty_io.c:975 [inline]
 #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: file_tty_write.constprop.0+0x2a8/0x8e0 drivers/tty/tty_io.c:1118
 #2: ffff88801b06c398 (&gsm->tx_lock){....}-{2:2}, at: gsmld_write+0x5e/0x150 drivers/tty/n_gsm.c:2717
irq event stamp: 3482
hardirqs last  enabled at (3481): [<ffffffff81d13343>] __get_reqs_available+0x143/0x2f0 fs/aio.c:946
hardirqs last disabled at (3482): [<ffffffff87d39722>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (3482): [<ffffffff87d39722>] _raw_spin_lock_irqsave+0x52/0x60 kernel/locking/spinlock.c:159
softirqs last  enabled at (3408): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20
softirqs last disabled at (3401): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 PID: 1105 Comm: syz-executor423 Not tainted 5.10.137-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x107/0x167 lib/dump_stack.c:118
 ___might_sleep.cold+0x1e8/0x22e kernel/sched/core.c:7304
 console_lock+0x19/0x80 kernel/printk/printk.c:2347
 do_con_write+0x113/0x1de0 drivers/tty/vt/vt.c:2909
 con_write+0x22/0xc0 drivers/tty/vt/vt.c:3296
 gsmld_write+0xd0/0x150 drivers/tty/n_gsm.c:2720
 do_tty_write drivers/tty/tty_io.c:1028 [inline]
 file_tty_write.constprop.0+0x502/0x8e0 drivers/tty/tty_io.c:1118
 call_write_iter include/linux/fs.h:1903 [inline]
 aio_write+0x355/0x7b0 fs/aio.c:1580
 __io_submit_one fs/aio.c:1952 [inline]
 io_submit_one+0xf45/0x1a90 fs/aio.c:1999
 __do_sys_io_submit fs/aio.c:2058 [inline]
 __se_sys_io_submit fs/aio.c:2028 [inline]
 __x64_sys_io_submit+0x18c/0x2f0 fs/aio.c:2028
 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

The problem happens in the following control flow:

gsmld_write(...)
spin_lock_irqsave(&gsm->tx_lock, flags) // taken a spinlock on TX data
 con_write(...)
  do_con_write(...)
   console_lock()
    might_sleep() // -> bug

As far as console_lock() might sleep it should not be called with
spinlock held.

The patch replaces tx_lock spinlock with mutex in order to avoid the
problem.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 32dd59f969 ("tty: n_gsm: fix race condition in gsmld_write()")
Cc: stable <stable@kernel.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/20220829131640.69254-3-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:40:17 +02:00
Fedor Pchelkin
c9ab053e56 tty: n_gsm: replace kicktimer with delayed_work
A kick_timer timer_list is replaced with kick_timeout delayed_work to be
able to synchronize with mutexes as a prerequisite for the introduction
of tx_mutex.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: c568f7086c ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <stable@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/20220829131640.69254-2-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:37:40 +02:00
Tetsuo Handa
4bb1a53be8 tty: n_gsm: initialize more members at gsm_alloc_mux()
syzbot is reporting use of uninitialized spinlock at gsmld_write() [1], for
commit 32dd59f969 ("tty: n_gsm: fix race condition in gsmld_write()")
allows accessing gsm->tx_lock before gsm_activate_mux() initializes it.

Since object initialization should be done right after allocation in order
to avoid accessing uninitialized memory, move initialization of
timer/work/waitqueue/spinlock from gsmld_open()/gsm_activate_mux() to
gsm_alloc_mux().

Link: https://syzkaller.appspot.com/bug?extid=cf155def4e717db68a12 [1]
Fixes: 32dd59f969 ("tty: n_gsm: fix race condition in gsmld_write()")
Reported-by: syzbot <syzbot+cf155def4e717db68a12@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+cf155def4e717db68a12@syzkaller.appspotmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/2110618e-57f0-c1ce-b2ad-b6cacef3f60e@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:35:04 +02:00
Mazin Al Haddad
f16c6d2e58 tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
A null pointer dereference can happen when attempting to access the
"gsm->receive()" function in gsmld_receive_buf(). Currently, the code
assumes that gsm->recieve is only called after MUX activation.
Since the gsmld_receive_buf() function can be accessed without the need to
initialize the MUX, the gsm->receive() function will not be set and a
NULL pointer dereference will occur.

Fix this by avoiding the call to "gsm->receive()" in case the function is
not initialized by adding a sanity check.

Call Trace:
 <TASK>
 gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861
 tiocsti drivers/tty/tty_io.c:2293 [inline]
 tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://syzkaller.appspot.com/bug?id=bdf035c61447f8c6e0e6920315d577cb5cc35ac5
Fixes: 01aecd9171 ("tty: n_gsm: fix tty registration before control channel open")
Cc: stable <stable@kernel.org>
Reported-and-tested-by: syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Link: https://lore.kernel.org/r/20220814015211.84180-1-mazinalhaddad05@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:34:36 +02:00
Yunfei Dong
b9b9db6a2d media: mediatek: vcodec: add decoder compatible to support mt8188
1: add mt8188's compatible name: mediatek,mt8188-vcodec-dec.
2: mt8188 is lat single core architecture, using mtk_lat_sig_core_pdata to
   initialize private data.
3: Getting mt8188's chip name according to decoder compatible name.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:33:42 +02:00
Sergiu Moga
692a8ebcfc tty: serial: atmel: Preserve previous USART mode if RS485 disabled
Whenever the atmel_rs485_config() driver method would be called,
the USART mode is reset to normal mode before even checking if
RS485 flag is set, thus resulting in losing the previous USART
mode in the case where the checking fails.

Some tools, such as `linux-serial-test`, lead to the driver calling
this method when doing the setup of the serial port: after setting the
port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.),
`linux-serial-test` tries to enable/disable RS485 depending on
the commandline arguments that were passed.

Example of how this issue could reveal itself:
When doing a serial communication with Hardware Flow Control through
`linux-serial-test`, the tool would lead to the driver roughly doing
the following:
- set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the
ATMEL_US_MR register) through the atmel_set_termios() to enable
Hardware Flow Control
- disable RS485 through the atmel_config_rs485() method
Thus, when the latter is called, the mode will be reset and the
previously set bit is unset, leaving USART in normal mode instead of
the expected Hardware Flow Control mode.

This fix ensures that this reset is only done if the checking for
RS485 succeeds and that the previous mode is preserved otherwise.

Fixes: e8faff7330 ("ARM: 6092/1: atmel_serial: support for RS485 communications")
Cc: stable <stable@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:33:08 +02:00
Yunfei Dong
8fcfa82556 media: dt-bindings: media: mediatek: vcodec: add decoder dt-bindings for mt8188
Add decoder document in dt-bindings yaml file for mt8188 platform.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:33:04 +02:00
Irui Wang
58037ad43f media: mediatek: vcodec: Use ctx vb2_queue mutex instead of device mutex
There is only one device mutex to lock vb2_queue when running
multi-instance encoding, it can be set by each encoder context.

[hverkuil: fix q_mutex documentation in the header]

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:32:39 +02:00
Sherry Sun
d5a2e08343 tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
When the user initializes the uart port, and waits for the transmit
engine to complete in lpuart32_set_termios(), if the UART TX fifo has
dirty data and the UARTMODIR enable the flow control, the TX fifo may
never be empty. So here we should disable the flow control first to make
sure the transmit engin can complete.

Fixes: 380c966c09 ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:32:33 +02:00
Irui Wang
cd61f3c679 media: mediatek: vcodec: Fix bitstream crop information error
Usually, the real bitstream width and height will set to driver
by vidioc_s_fmt, and vidioc_try_fmt() does align to get the
buffer width and height, driver calculate the encoded bitstream
crop information through them. The aligned resolution will be set
as real resolution now if user didn't set crop info by
V4L2_SEL_TGT_CROP, and the encoded bitstream may exist green line
because of crop information error.

Fixs: 'b6c57d313f ("media: mtk-vcodec: venc: remove redundant code")'

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:32:09 +02:00
Vincent Whitchurch
56c14fb408 tty: Fix lookahead_buf crash with serdev
Do not follow a NULL pointer if the tty_port_client_operations does not
implement the ->lookahead_buf() callback, which is the case with
serdev's ttyport.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 6bb6fa6908 ("tty: Implement lookahead to process XON/XOFF timely")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220818115026.2237893-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:31:53 +02:00
Irui Wang
223afdf9ca media: mediatek: vcodec: Remove encoder driver get IRQ resource
The "platform_get_resource(pdev, IORESOURCE_IRQ, 0)" is no longer
used after commit a1a2b7125e107("of/platform: Drop static setup of
IRQ resource from DT core"), so just remove the function in
encoder driver to avoid driver probe failed.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:31:40 +02:00
Shenwei Wang
846651eca0 serial: fsl_lpuart: RS485 RTS polariy is inverse
The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:31:15 +02:00
Irui Wang
53ed4873a2 media: mediatek: vcodec: Add mt8188 encoder driver
Add mt8188's compatible "mediatek,mt8188-vcodec-enc".
Add mt8188's device private data "mt8188_pdata".

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:31:06 +02:00
Helge Deller
566f9c9f89 vt: Clear selection before changing the font
When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:30:52 +02:00
Irui Wang
e9164d272f media: dt-bindings: media: mediatek: vcodec: Add encoder dt-bindings for mt8188
Add encoder dt-bindings for mt8188.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:30:41 +02:00
Irui Wang
34cb6947bf media: mediatek: vcodec: Add encoder driver support for 34-bit iova
Encoder driver got iova from IOMMU is 34-bit, for example:

Here is the sample code:
encoder input frame buffer dma address is:
frm_buf =
    vb2_dma_contig_plane_dma_addr(&vb2_v4l2_buffer->vb2_buf, 0);
the value of frm_buf is 0x1_ff30_0000.

encoder driver got the frm_buf and send the iova to SCP firmware
through SCP IPI message, then write to encoder hardware in SCP.
The iova is stored in IPI message as uint32_t data type, so the
value will be truncated from *0x1_ff30_0000* to *0xff30_0000*,
and then *0xff30_0000* will be written to encoder hardware, but
IOMMU will help to add the high *0x1_* bit back, so IOMMU can
translate the iova to PA correctly, encoder hardware can access
the correct memory for encoding.
Another reason to do this is the encoder hardware can't access
the 34-bit iova, IOMMU will help to add the remaining high bits
of iova. But for mt8188, encoder hardware can access 34-bit iova
directly, and encoder driver need write all 34 bits because
IOMMU can't help driver do this if the hardware support access
34-bit iova.
For the reasons above, this patch is added to support transfer
34-bit iova between kernel and SCP encoder driver. Use uint64_t
data type to store the iova, for compatibility with old chipsets,
add some new struct definitions for 34-bit.

[hverkuil: initialize wb and wb_34 to NULL]

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:30:18 +02:00
Ilpo Järvinen
cac8f71941 serial: tegra: Remove custom frame size calculation
The number of bits can be calculated using tty_get_frame_size(), no
need for the driver to do it on its own.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220830084925.5608-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:28:33 +02:00
Ilpo Järvinen
5ec2952c62 serial: sunsab: Remove frame size calculation dead-code
The driver features a custom frame length calculation but the result is
never used. Remove it.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220830084925.5608-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:28:33 +02:00
Ilpo Järvinen
d4be10c816 serial: fsl_lpuart: Remove custom frame size calculation
The number of bits can be calculated using tty_get_frame_size(), no
need for the driver to do it on its own. Change bits to unsigned and
baud too since we're touching the declarations line anyway (the
respective core functions are typed unsigned).

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220830084925.5608-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:28:33 +02:00
Ilpo Järvinen
d9ad71a2fb serial: cpm_uart: Remove custom frame size calculation
The number of bits can be calculated using helpers in core, no need for
the driver to do it on its own.

The mode register is programmed with frame bits minus 1, rearrange the
comments related to that "feature" closer to the actual write.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220830084925.5608-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:28:33 +02:00
Ilpo Järvinen
d4ab5c2e9c serial: ucc_uart: Remove custom frame size calculation
The number of bits can be calculated using tty_get_frame_size(), no
need for the driver to do it on its own.

Also remove a comment on number of bits that doesn't match the code nor
the comment on ucc_uart_pram's rx_length ("minus 1" part differs). That
comment seems a verbatim copy of that in cpm_uart/cpm_uart_core.c
anyway so perhaps it was just copied over w/o much thinking.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220830084925.5608-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:28:33 +02:00
Tomi Valkeinen
d91105e056 media: ti: cal: fix wdma irq for metadata
CAL HW interrupts are inherently racy. If we get both start and end
interrupts, we don't know what has happened: did the DMA for a single
frame start and end, or did one frame end and a new frame start?

Usually for normal pixel frames we get the interrupts separately. If
we do get both, we have to guess. The assumption in the code is that the
active vertical area is larger than the blanking vertical area, and thus
it is more likely that we get the end of the old frame and the start of
a new frame.

However, for embedded data, which is only a few lines high, we always
get both interrupts. Here the assumption is that we get both for the
same frame.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:27:05 +02:00
Rafael J. Wysocki
02af1db05d Merge back thermal control material for v6.1. 2022-08-30 14:26:26 +02:00
Tomi Valkeinen
0872dc04cf media: ti: cal: combine wdma irq handling
Instead of handling the WDMA START and END interrupts separately, we
need to handle both at the same time to better manage the inherent race
conditions related to CAL interrupts.

Change the code so that we have a single function,
cal_irq_handle_wdma(), which gets two booleans, start and end, as
parameters, which allows us to manage the race conditions in the
following patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-30 14:26:12 +02:00
Al Viro
0c7833b9e8 termios: get rid of stray asm/termios.h include in n_hdlc.c
that's the only one outside of include/uapi/linux/termios.h and it's
not even needed there - we have linux/tty.h already pulled and that
pulls linux/termios.h

Normally I would not consider that a sufficient reason, but there's a
plenty of linux/tty.h users, and this is the only one that follows that
with asm/termios.h.  The situation with termios.h is genuinely convoluted,
and this complicates it for no good reason.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20220821010239.1554132-2-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:25:02 +02:00
Al Viro
6f418aeaad loongarch: remove generic-y += termios.h
not really needed - UAPI mandatory-y += termios.h is sufficient...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
Link: https://lore.kernel.org/r/20220821010239.1554132-1-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:24:32 +02:00
Rafael J. Wysocki
e3b9b27865 ACPI: Drop redundant acpi_dev_parent() header
Because acpi_dev_parent() is defined as static inline, the extra
header of it in acpi_bus.h is redundant, so drop it.

Fixes: 62fcb99bdf ("ACPI: Drop parent field from struct acpi_device")
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
2022-08-30 14:23:41 +02:00
Ilpo Järvinen
1a9a591046 serial: pch_uart: CIRC_CNT_TO_END() is enough
Testing also CIRC_CNT() with CIRC_CNT_TO_END() is unnecessary because
to latter alone covers all necessary cases.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220823141839.165244-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:23:05 +02:00
Ilpo Järvinen
575ca2cb89 serial: sh-sci: tail is already on valid range
There is no need to and tail with UART_XMIT_SIZE - 1 because tail is
already on valid range.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220823141839.165244-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:23:05 +02:00
Ilpo Järvinen
a54dc4b381 serial: sh-sci: CIRC_CNT_TO_END() is enough
Testing also CIRC_CNT() with CIRC_CNT_TO_END() is unnecessary because
to latter alone covers all necessary cases.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220823141839.165244-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:23:05 +02:00
Rafael J. Wysocki
d5008ef5b5 ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power()
In principle, it should be valid to pass NULL as the ACPI device
pointer to acpi_device_get_power() and acpi_device_set_power() and they
both are expected to return -EINVAL in that case, but that has been
broken recently by commit 62fcb99bdf ("ACPI: Drop parent field from
struct acpi_device") which has caused the ACPI device pointer to be
dereferenced in these functions before the NULL check.

Fix that and while at it make acpi_device_set_power() only use the
parent field if the target ACPI device object's ignore_parent flag
in not set.

Fixes: 62fcb99bdf ("ACPI: Drop parent field from struct acpi_device")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-30 14:22:51 +02:00
Ilpo Järvinen
a8c11c1520 tty: Make ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:35 +02:00
Ilpo Järvinen
f6d47fe592 usb: serial: Make ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:35 +02:00
Ilpo Järvinen
bec5b814d4 serial: Make ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:35 +02:00
Ilpo Järvinen
8b7d2d95cf tty: Make ldisc ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:34 +02:00
Ilpo Järvinen
d15f89d997 tty: Make tty_termios_copy_hw() old ktermios const
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:34 +02:00
Ilpo Järvinen
c87391b5dd serial: dz: Assume previous baudrate is valid
Assume previously used termios has a valid baudrate and use
it directly.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:34 +02:00
Ilpo Järvinen
292e2e7a63 tty: Fix comment style in tty_termios_input_baud_rate()
Add proper spacing to comment.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:34 +02:00