Aaron Conole says:
====================
selftests: openvswitch: add support for testing upcall interface
The existing selftest suite for openvswitch will work for regression
testing the datapath feature bits, but won't test things like adding
interfaces, or the upcall interface. Here, we add some additional
test facilities.
First, extend the ovs-dpctl.py python module to support the OVS_FLOW
and OVS_PACKET netlink families, with some associated messages. These
can be extended over time, but the initial support is for more well
known cases (output, userspace, and CT).
Next, extend the test suite to test upcalls by adding a datapath,
monitoring the upcall socket associated with the datapath, and then
dumping any upcalls that are received. Compare with expected ARP
upcall via arping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The upcall socket interface can be exercised now to make sure that
future feature adjustments to the field can maintain backwards
compatibility.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a basic set of fields to print in a 'dpflow' format. This will be
used by future commits to check for flow fields after parsing, as
well as verifying the flow fields pushed into the kernel from
userspace.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Includes an associated test to generate netns and connect
interfaces, with the option to include packet tracing.
This will be used in the future when flow support is added
for additional test cases.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the 1PPS output was enabled and then lan8841 was configured to be a
follower, then target clock which is used to generate the 1PPS was not
configure correctly. The problem was that for each adjustments of the
time, also the nanosecond part of the target clock was changed.
Therefore the initial nanosecond part of the target clock was changed.
The issue can be observed if both the leader and the follower are
generating 1PPS and see that their PPS are not aligned even if the time
is allined.
The fix consists of not modifying the nanosecond part of the target
clock when adjusting the time. In this way the 1PPS get also aligned.
Fixes: e4ed8ba08e ("net: phy: micrel: Add support for PTP_PF_PEROUT for lan8841")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here we copy the data from the original buf to the new page. But we
not check that it may be overflow.
As long as the size received(including vnethdr) is greater than 3840
(PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow.
And this is completely possible, as long as the MTU is large, such
as 4096. In our test environment, this will cause crash. Since crash is
caused by the written memory, it is meaningless, so I do not include it.
Fixes: 72979a6c35 ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The point of the WARN was to print something, not oops
straight up. Currently that is precisely what happens
if we can't find the connector for the crtc in the atomic
state. Get the dev pointer from the atomic state instead
of the potentially NULL encoder to avoid that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200602.6037-2-ville.syrjala@linux.intel.com
Fixes: 3a47ae201e ("drm/i915/display: Make WARN* drm specific where encoder ptr is available")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 3b6692357f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When HuC is loaded by GSC, there is no header definition for the kernel
to look at and firmware is just handed to GSC. However when reading the
version, it should still check the size of the blob to guarantee it's not
incurring into out-of-bounds array access.
If firmware is smaller than expected, the following message is now
printed:
# echo boom > /lib/firmware/i915/dg2_huc_gsc.bin
# dmesg | grep -i huc
[drm] GT0: HuC firmware i915/dg2_huc_gsc.bin: invalid size: 5 < 184
[drm] *ERROR* GT0: HuC firmware i915/dg2_huc_gsc.bin: fetch failed -ENODATA
...
Even without this change the size, header and signature are still
checked by GSC when loading, so this only avoids the out-of-bounds array
access.
Fixes: a7b516bd98 ("drm/i915/huc: Add fetch support for gsc-loaded HuC binary")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200349.3492571-1-lucas.demarchi@intel.com
(cherry picked from commit adfbae9ffe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Commit 27f2a4db76 ("Makefile: fix GDB warning with CONFIG_RELR")
added --use-android-relr-tags to fix a GDB warning
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
The GDB warning has been fixed in version 11.2.
The DT_ANDROID_RELR tag was deprecated since DT_RELR was standardized.
Thus, --use-android-relr-tags should be removed. While making the
change, try -z pack-relative-relocs, which is supported since LLD 15.
Keep supporting --pack-dyn-relocs=relr as well for older LLD versions.
There is no indication of obsolescence for --pack-dyn-relocs=relr.
As of today, GNU ld supports the latter option for x86 and powerpc64
ports and has no intention to support --pack-dyn-relocs=relr. In the
absence of the glibc symbol version GLIBC_ABI_DT_RELR,
--pack-dyn-relocs=relr and -z pack-relative-relocs are identical in
ld.lld.
GNU ld and newer versions of LLD report warnings (instead of errors) for
unknown -z options. Only errors lead to non-zero exit codes. Therefore,
we should test --pack-dyn-relocs=relr before testing
-z pack-relative-relocs.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=a619b58721f0a03fd91c27670d3e4c2fb0d88f1e
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The target triple is overridden by the user-supplied CROSS_COMPILE,
but I do not see a good reason to support it. Users can use a new
architecture without adding CLANG_TARGET_FLAGS_*, but that would be
a rare case.
Use the hard-coded and deterministic target triple all the time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
In the builddeb context, the DEB_HOST_ARCH environment variable is set
to the same value as debian/arch's content, so use the variable with
dpkg-architecture.
This is the last use of the debian/arch file during dpkg-buildpackage time.
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 010a0aad39 ("kallsyms: Correctly sequence symbols when
CONFIG_LTO_CLANG=y") added --lto-clang, and updated the usage()
function, but not the comment. Update it in the same way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, expand_symbol() is called many times to get the uncompressed
symbol names for sorting, and also for adding comments.
With the output order shuffled in the previous commit, the symbol data
are now written in the following order:
(1) kallsyms_num_syms
(2) kallsyms_names <-- need compressed names
(3) kallsyms_markers
(4) kallsyms_token_table
(5) kallsyms_token_index
(6) kallsyms_addressed / kallsyms_offsets <-- need uncompressed names (for commenting)
(7) kallsyms_relative_base
(8) kallsyms_seq_of_names <-- need uncompressed names (for sorting)
The compressed names are only needed by (2).
Call expand_symbol() between (2) and (3) to restore the original symbol
names. This requires just one expand_symbol() call for each symbol.
Call cleanup_symbol_name() between (7) and (8) instead of during sorting.
It is allowed to overwrite the ->sym field because (8) just outputs the
index instead of the name of each symbol. Again, this requires just one
cleanup_symbol_name() call for each symbol.
This refactoring makes it ~30% faster.
[Before]
$ time scripts/kallsyms --all-symbols --absolute-percpu --base-relative \
.tmp_vmlinux.kallsyms2.syms >/dev/null
real 0m1.027s
user 0m1.010s
sys 0m0.016s
[After]
$ time scripts/kallsyms --all-symbols --absolute-percpu --base-relative \
.tmp_vmlinux.kallsyms2.syms >/dev/null
real 0m0.717s
user 0m0.717s
sys 0m0.000s
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, this tool outputs symbol data in the following order.
(1) kallsyms_addressed / kallsyms_offsets
(2) kallsyms_relative_base
(3) kallsyms_num_syms
(4) kallsyms_names
(5) kallsyms_markers
(6) kallsyms_seq_of_names
(7) kallsyms_token_table
(8) kallsyms_token_index
This commit changes the order as follows:
(1) kallsyms_num_syms
(2) kallsyms_names
(3) kallsyms_markers
(4) kallsyms_token_table
(5) kallsyms_token_index
(6) kallsyms_addressed / kallsyms_offsets
(7) kallsyms_relative_base
(8) kallsyms_seq_of_names
The motivation is to decrease the number of function calls to
expand_symbol() and cleanup_symbol_name().
The compressed names are only required for writing 'kallsyms_names'.
If you do this first, we can restore the original symbol names.
You do not need to repeat the same operation over again.
The actual refactoring will happen in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/kallsyms.c maintains compiler-generated symbols, but we end up
with something similar in scripts/mksysmap to avoid the "Inconsistent
kallsyms data" error. For example, commit c17a253870 ("mksysmap: Fix
the mismatch of 'L0' symbols in System.map").
They were separately maintained prior to commit 94ff2f63d6 ("kbuild:
reuse mksysmap output for kallsyms").
Now that scripts/kallsyms.c parses the output of scripts/mksysmap,
it makes more sense to collect all the ignored patterns to mksysmap.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Drop the symbols generated by scripts/kallsyms itself automatically
instead of maintaining the symbol list manually.
Pass the kallsyms object from the previous kallsyms step (if it exists)
as the third parameter of scripts/mksysmap, which will weed out the
generated symbols from the input to the next kallsyms step.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is not feasible to insert comments in a multi-line shell command.
Use sed, and move comments close to the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The symbol types 'U' and 'N' are already filtered out by the following
line in scripts/mksysmap:
-e ' [aNUw] '
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The assembler output of kallsyms.c is not meant for people to understand,
and is generally not helpful when debugging "Inconsistent kallsyms data"
warnings. I have previously struggled with these, but found it helpful
to list which symbols changed between the first and second pass in the
.tmp_vmlinux.kallsyms*.S files.
As this file is preprocessed, it's possible to add a C-style multiline
comment with the full type/name tuple.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The configs ROMBASE and ROMSIZE were used in arch/m68k/68360/head-ram.S,
which was removed with commit a3595962d8 ("m68knommu: remove obsolete
68360 support").
Remove the obsolete configs ROMBASE and ROMSIZE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: a3595962d8 ("m68knommu: remove obsolete 68360 support")
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
uclinux.org is dead. Drop it from the MAINTAINERS file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
@server->origin_fullpath already contains the tree name + optional
prefix, so avoid calling __build_path_from_dentry_optional_prefix() as
it might end up duplicating prefix path from @cifs_sb->prepath into
final full path.
Instead, generate DFS full path by simply merging
@server->origin_fullpath with dentry's path.
This fixes the following case
mount.cifs //root/dfs/dir /mnt/ -o ...
ls /mnt/link
where cifs_dfs_do_automount() will call smb3_parse_devname() with
@devname set to "//root/dfs/dir/link" instead of
"//root/dfs/dir/dir/link".
Fixes: 7ad54b98fc ("cifs: use origin fullpath for automounts")
Cc: <stable@vger.kernel.org> # 6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit b12e5c6c75 accidentally changes blk_kick_flush to do a head
insert into the requeue list, fix this up.
Fixes: b12e5c6c75 ("blk-mq: pass a flags argument to blk_mq_add_to_requeue_list")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230416073553.966161-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes a build error when CONFIG_FAULT_INJECTION_CONFIGFS=y and
CONFIG_CONFIGFS_FS=m.
Since the fault-injection library cannot built as a module, avoid building
configfs as a module.
Fixes: 4668c7a294 ("fault-inject: allow configuration via configfs")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304150025.K0hczLR4-lkp@intel.com/
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a long chain of memory dereferencing just to whether or not
this disk has a special submit_bio helper. As that's not necessarily
the common case, add a bd_has_submit_bio state in the bdev to avoid
traversing this memory dependency chain if we don't need to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This moves struct device out-of-line as it's just used at open/close
time, so we can keep some of the commonly used fields closer together.
On a standard setup, it also reduces the size from 864 bytes to 848
bytes. Yes, struct device is a pig...
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a proposal to revert commit 914eedcb9b.
I found this when writing a simple UFFDIO_API test to be the first unit
test in this set. Two things breaks with the commit:
- UFFDIO_API check was lost and missing. According to man page, the
kernel should reject ioctl(UFFDIO_API) if uffdio_api.api != 0xaa. This
check is needed if the api version will be extended in the future, or
user app won't be able to identify which is a new kernel.
- Feature flags checks were removed, which means UFFDIO_API with a
feature that does not exist will also succeed. According to the man
page, we should (and it makes sense) to reject ioctl(UFFDIO_API) if
unknown features passed in.
Link: https://lore.kernel.org/r/20220722201513.1624158-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230412163922.327282-2-peterx@redhat.com
Fixes: 914eedcb9b ("userfaultfd: don't fail on unrecognized features")
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KASAN report null-ptr-deref:
==================================================================
BUG: KASAN: null-ptr-deref in bdi_split_work_to_wbs+0x5c5/0x7b0
Write of size 8 at addr 0000000000000000 by task sync/943
CPU: 5 PID: 943 Comm: sync Tainted: 6.3.0-rc5-next-20230406-dirty #461
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0xc0
print_report+0x2ba/0x340
kasan_report+0xc4/0x120
kasan_check_range+0x1b7/0x2e0
__kasan_check_write+0x24/0x40
bdi_split_work_to_wbs+0x5c5/0x7b0
sync_inodes_sb+0x195/0x630
sync_inodes_one_sb+0x3a/0x50
iterate_supers+0x106/0x1b0
ksys_sync+0x98/0x160
[...]
==================================================================
The race that causes the above issue is as follows:
cpu1 cpu2
-------------------------|-------------------------
inode_switch_wbs
INIT_WORK(&isw->work, inode_switch_wbs_work_fn)
queue_rcu_work(isw_wq, &isw->work)
// queue_work async
inode_switch_wbs_work_fn
wb_put_many(old_wb, nr_switched)
percpu_ref_put_many
ref->data->release(ref)
cgwb_release
queue_work(cgwb_release_wq, &wb->release_work)
// queue_work async
&wb->release_work
cgwb_release_workfn
ksys_sync
iterate_supers
sync_inodes_one_sb
sync_inodes_sb
bdi_split_work_to_wbs
kmalloc(sizeof(*work), GFP_ATOMIC)
// alloc memory failed
percpu_ref_exit
ref->data = NULL
kfree(data)
wb_get(wb)
percpu_ref_get(&wb->refcnt)
percpu_ref_get_many(ref, 1)
atomic_long_add(nr, &ref->data->count)
atomic64_add(i, v)
// trigger null-ptr-deref
bdi_split_work_to_wbs() traverses &bdi->wb_list to split work into all
wbs. If the allocation of new work fails, the on-stack fallback will be
used and the reference count of the current wb is increased afterwards.
If cgroup writeback membership switches occur before getting the reference
count and the current wb is released as old_wd, then calling wb_get() or
wb_put() will trigger the null pointer dereference above.
This issue was introduced in v4.3-rc7 (see fix tag1). Both
sync_inodes_sb() and __writeback_inodes_sb_nr() calls to
bdi_split_work_to_wbs() can trigger this issue. For scenarios called via
sync_inodes_sb(), originally commit 7fc5854f8c ("writeback: synchronize
sync(2) against cgroup writeback membership switches") reduced the
possibility of the issue by adding wb_switch_rwsem, but in v5.14-rc1 (see
fix tag2) removed the "inode_io_list_del_locked(inode, old_wb)" from
inode_switch_wbs_work_fn() so that wb->state contains WB_has_dirty_io,
thus old_wb is not skipped when traversing wbs in bdi_split_work_to_wbs(),
and the issue becomes easily reproducible again.
To solve this problem, percpu_ref_exit() is called under RCU protection to
avoid race between cgwb_release_workfn() and bdi_split_work_to_wbs().
Moreover, replace wb_get() with wb_tryget() in bdi_split_work_to_wbs(),
and skip the current wb if wb_tryget() fails because the wb has already
been shutdown.
Link: https://lkml.kernel.org/r/20230410130826.1492525-1-libaokun1@huawei.com
Fixes: b817525a4a ("writeback: bdi_writeback iteration must not skip dying ones")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In mas_alloc_nodes(), "node->node_count = 0" means to initialize the
node_count field of the new node, but the node may not be a new node. It
may be a node that existed before and node_count has a value, setting it
to 0 will cause a memory leak. At this time, mas->alloc->total will be
greater than the actual number of nodes in the linked list, which may
cause many other errors. For example, out-of-bounds access in
mas_pop_node(), and mas_pop_node() may return addresses that should not be
used. Fix it by initializing node_count only for new nodes.
Also, by the way, an if-else statement was removed to simplify the code.
Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When using cull option with 'tg' flag, the fprintf is using pid instead
of tgid. It should use tgid instead.
Link: https://lkml.kernel.org/r/20230411034929.2071501-1-steve_chou@pesi.com.tw
Fixes: 9c8a0a8e59 ("tools/vm/page_owner_sort.c: support for user-defined culling rules")
Signed-off-by: Steve Chou <steve_chou@pesi.com.tw>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/d79bc6eaf65e68bd1c2a1e1510ab6291ce5926a6.1681162487.git.jtoppins@redhat.com
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_mempolicy_home_node() iterates over a list of VMAs and calls
mbind_range() on each VMA, which also iterates over the singular list of
the VMA passed in and potentially splits the VMA. Since the VMA iterator
is not passed through, set_mempolicy_home_node() may now point to a stale
node in the VMA tree. This can result in a UAF as reported by syzbot.
Avoid the stale maple tree node by passing the VMA iterator through to the
underlying call to split_vma().
mbind_range() is also overly complicated, since there are two calling
functions and one already handles iterating over the VMAs. Simplify
mbind_range() to only handle merging and splitting of the VMAs.
Align the new loop in do_mbind() and existing loop in
set_mempolicy_home_node() to use the reduced mbind_range() function. This
allows for a single location of the range calculation and avoids
constantly looking up the previous VMA (since this is a loop over the
VMAs).
Link: https://lore.kernel.org/linux-mm/000000000000c93feb05f87e24ad@google.com/
Fixes: 66850be55e ("mm/mempolicy: use vma iterator & maple state instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20230410152205.2294819-1-Liam.Howlett@oracle.com
Tested-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
split_huge_page_to_list() WARNs when called for huge zero pages, which
sounds to me too harsh because it does not imply a kernel bug, but just
notifies the event to admins. On the other hand, this is considered as
critical by syzkaller and makes its testing less efficient, which seems to
me harmful.
So replace the VM_WARN_ON_ONCE_FOLIO with pr_warn_ratelimited.
Link: https://lkml.kernel.org/r/20230406082004.2185420-1-naoya.horiguchi@linux.dev
Fixes: 478d134e95 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: syzbot+07a218429c8d19b1fb25@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a6f34a05e6efcd01@google.com/
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the loop over the VMA is terminated early due to an error, the return
code could be overwritten with ENOMEM. Fix the return code by only
setting the error on early loop termination when the error is not set.
User-visible effects include: attempts to run mprotect() against a
special mapping or with a poorly-aligned hugetlb address should return
-EINVAL, but they presently return -ENOMEM. In other cases an -EACCESS
should be returned.
Link: https://lkml.kernel.org/r/20230406193050.1363476-1-Liam.Howlett@oracle.com
Fixes: 2286a6914c ("mm: change mprotect_fixup to vma iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Khugepaged collapse an anonymous thp in two rounds of scans. The 2nd
round done in __collapse_huge_page_isolate() after
hpage_collapse_scan_pmd(), during which all the locks will be released
temporarily. It means the pgtable can change during this phase before 2nd
round starts.
It's logically possible some ptes got wr-protected during this phase, and
we can errornously collapse a thp without noticing some ptes are
wr-protected by userfault. e1e267c792 wanted to avoid it but it only
did that for the 1st phase, not the 2nd phase.
Since __collapse_huge_page_isolate() happens after a round of small page
swapins, we don't need to worry on any !present ptes - if it existed
khugepaged will already bail out. So we only need to check present ptes
with uffd-wp bit set there.
This is something I found only but never had a reproducer, I thought it
was one caused a bug in Muhammad's recent pagemap new ioctl work, but it
turns out it's not the cause of that but an userspace bug. However this
seems to still be a real bug even with a very small race window, still
worth to have it fixed and copy stable.
Link: https://lkml.kernel.org/r/20230405155120.3608140-1-peterx@redhat.com
Fixes: e1e267c792 ("khugepaged: skip collapse if uffd-wp detected")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Looks like what we fixed for hugetlb in commit 44f86392bd ("mm/hugetlb:
fix uffd-wp handling for migration entries in
hugetlb_change_protection()") similarly applies to THP.
Setting/clearing uffd-wp on THP migration entries is not implemented
properly. Further, while removing migration PMDs considers the uffd-wp
bit, inserting migration PMDs does not consider the uffd-wp bit.
We have to set/clear independently of the migration entry type in
change_huge_pmd() and properly copy the uffd-wp bit in
set_pmd_migration_entry().
Verified using a simple reproducer that triggers migration of a THP, that
the set_pmd_migration_entry() no longer loses the uffd-wp bit.
Link: https://lkml.kernel.org/r/20230405160236.587705-2-david@redhat.com
Fixes: f45ec5ff16 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The ->percpu_pvec_drained was originally introduced by commit d9ed0d08b6
("mm: only drain per-cpu pagevecs once per pagevec usage") to drain
per-cpu pagevecs only once per pagevec usage. But after converting the
swap code to be more folio-based, the commit c2bc16817a ("mm/swap: add
folio_batch_move_lru()") breaks this logic, which would cause
->percpu_pvec_drained to be reset to false, that means per-cpu pagevecs
will be drained multiple times per pagevec usage.
In theory, there should be no functional changes when converting code to
be more folio-based. We should call folio_batch_reinit() in
folio_batch_move_lru() instead of folio_batch_init(). And to verify that
we still need ->percpu_pvec_drained, I ran mmtests/sparsetruncate-tiny and
got the following data:
baseline with
baseline/ patch/
Min Time 326.00 ( 0.00%) 328.00 ( -0.61%)
1st-qrtle Time 334.00 ( 0.00%) 336.00 ( -0.60%)
2nd-qrtle Time 338.00 ( 0.00%) 341.00 ( -0.89%)
3rd-qrtle Time 343.00 ( 0.00%) 347.00 ( -1.17%)
Max-1 Time 326.00 ( 0.00%) 328.00 ( -0.61%)
Max-5 Time 327.00 ( 0.00%) 330.00 ( -0.92%)
Max-10 Time 328.00 ( 0.00%) 331.00 ( -0.91%)
Max-90 Time 350.00 ( 0.00%) 357.00 ( -2.00%)
Max-95 Time 395.00 ( 0.00%) 390.00 ( 1.27%)
Max-99 Time 508.00 ( 0.00%) 434.00 ( 14.57%)
Max Time 547.00 ( 0.00%) 476.00 ( 12.98%)
Amean Time 344.61 ( 0.00%) 345.56 * -0.28%*
Stddev Time 30.34 ( 0.00%) 19.51 ( 35.69%)
CoeffVar Time 8.81 ( 0.00%) 5.65 ( 35.87%)
BAmean-99 Time 342.38 ( 0.00%) 344.27 ( -0.55%)
BAmean-95 Time 338.58 ( 0.00%) 341.87 ( -0.97%)
BAmean-90 Time 336.89 ( 0.00%) 340.26 ( -1.00%)
BAmean-75 Time 335.18 ( 0.00%) 338.40 ( -0.96%)
BAmean-50 Time 332.54 ( 0.00%) 335.42 ( -0.87%)
BAmean-25 Time 329.30 ( 0.00%) 332.00 ( -0.82%)
From the above it can be seen that we get similar data to when
->percpu_pvec_drained was introduced, so we still need it. Let's call
folio_batch_reinit() in folio_batch_move_lru() to restore the original
logic.
Link: https://lkml.kernel.org/r/20230405161854.6931-1-zhengqi.arch@bytedance.com
Fixes: c2bc16817a ("mm/swap: add folio_batch_move_lru()")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
higher than the average system load
-----BEGIN PGP SIGNATURE-----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=E+yZ
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Do not pull tasks to the local scheduling group if its average load
is higher than the average system load
* tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix imbalance overflow
boot is done, in order to prevent a crash
-----BEGIN PGP SIGNATURE-----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=Lrs2
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Drop __init annotation from two rtc functions which get called after
boot is done, in order to prevent a crash
* tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Remove __init for runtime functions
Switch EROFS_I_{VERSION,DATALAYOUT}_BITS into
EROFS_I_{VERSION,DATALAYOUT}_MASK.
Also avoid erofs_bitrange() since its functionality is simple enough.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230414083027.12307-2-hsiangkao@linux.alibaba.com
