This fixes:
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@12000: 'device_type' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@12000: '#address-cells' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@12000: '#size-cells' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@13000: 'device_type' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@13000: '#address-cells' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@13000: '#size-cells' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@14000: 'device_type' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@14000: '#address-cells' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: pcie@14000: '#size-cells' is a required property
From schema: /lib/python3.9/site-packages/dtschema/schemas/pci/pci-bus.yaml
What remains missing is "ranges" property. I currently don't know its
correct value for Northstar SoC.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220721091509.27725-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The cpu mask flag value should match the number of cpu cores in the
chip. Correct the value to two cpus for BCM6878 dual core SoC.
Fixes: 6bcad714e1 ("ARM: dts: Add DTS files for bcmbca SoC BCM6878")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194754.29492-1-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Remove unnecessary cpu_on and cpu_off properties from psci
node as they are only needed for psci version prior to 0.2.
Fixes: de1a99ac0b ("ARM: dts: Add DTS files for bcmbca SoC BCM6846")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194647.29437-2-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The cpu mask flag value should match the number of cpu cores in the
chip. Correct the value to two cpus for BCM6846 dual core SoC.
Fixes: de1a99ac0b ("ARM: dts: Add DTS files for bcmbca SoC BCM6846")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194647.29437-1-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Remove unnecessary cpu_on and cpu_off properties from psci
node as they are only needed for psci version prior to 0.2.
Fixes: fc85b7e64a ("ARM: dts: add dts files for bcmbca soc 63178")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194448.29363-2-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The cpu mask flag value should match the number of cpu cores in the
chip. Correct the value to three cpus for BCM63178 triple core SoC.
Fixes: fc85b7e64a ("ARM: dts: add dts files for bcmbca soc 63178")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220801194448.29363-1-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
If we use the ancient SysV syscall ABI, we'd better have tell the
kernel how to claim that a negative return value is a success.
Use ->orig_r2 for that - it's inaccessible via ptrace, so it's
a fair game for changes and it's normally[*] non-negative on return
from syscall. Set to -1; syscall is not going to be restart-worthy
by definition, so we won't interfere with that use either.
[*] the only exception is rt_sigreturn(), where we skip the entire
messing with r1/r2 anyway.
Fixes: 82ed08dd1b ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
sys_foo() returns -512 (aka -ERESTARTSYS) => do_signal() sees
512 in r2 and 1 in r1.
sys_foo() returns 512 => do_signal() sees 512 in r2 and 0 in r1.
The former is restart-worthy; the latter obviously isn't.
Fixes: b53e906d25 ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
all checks done before letting the tracer modify the register
state are worthless...
Fixes: 82ed08dd1b ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
fill the gaps in there with sys_ni_syscall, as everyone does...
Fixes: 82ed08dd1b ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
make sure that ->orig_r2 is negative for everything except
the syscalls.
Fixes: 82ed08dd1b ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The statement that snd_soc_tdm_params_to_bclk() is equivalent to
snd_soc_params_to_bclk() if tdm_width==tdm_slots==0 is not accurate,
it is only true is slot_multiple is also <2.
However, the description of special-case behaviour in terms of pairs of
tdm_width and tdm_slot values is not particularly helpful so we might as
well take the opportunity to rework the description to say the same thing
in a simpler way. The behaviour of a pair of values is obvious from a
description of each argument. At the same time make a few edits to clarify
the rest of the description.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815113346.3805075-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sameer Pujar <spujar@nvidia.com>:
DT binding properties are available to fixup rate and channel
parameters of a DAI. This series extends this to sample format
conversion as well. With this now DAI PCM parameters (channels,
sample rate and sample format) can be fixed up as necessary in
an audio path.
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a patch set for rather simple conversions from the plain
sprintf() & co to the new helpers, sysfs_emit() and sysfs_emit_at().
No functional changes are expected.
hyperv_setup_vram() calls vmbus_allocate_mmio(). This must be undone in
the error handling path of the probe, as already done in the remove
function.
Fixes: a0ab5abced ("drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/7dfa372af3e35fbb1d6f157183dfef2e4512d3be.1659297696.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Wei Liu <wei.liu@kernel.org>
These flags are mutually exclusive, report EINVAL in this case.
Fixes: aaa31047a6 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the
netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise,
NFTA_SET_ELEM_KEY_END should not be present.
For catch-all element, NFTA_SET_ELEM_KEY_END should not be present.
The NFT_SET_ELEM_INTERVAL_END is never used with this set flags
combination.
Fixes: 7b225d0b5c ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Merge series from Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>:
This patch enables the Microchip's FPGA QSPI and Polarfire SoC QSPI
controller support.
Tested spi-nand (W25N01GV) and spi-nor (MT25QL256A) on Microchip's
ICICLE kit. tested using both FPGA QSPI and Polarfie SoC QSPI.
Adding or removing room space _below_ layers 2 or 3, as the description
mentions, is ambiguous. This was written with a mental image of the
packet with layer 2 at the top, layer 3 under it, and so on. But it has
led users to believe that it was on lower layers (before the beginning
of the L2 and L3 headers respectively).
Let's make it more explicit, and specify between which layers the room
space is adjusted.
Reported-by: Rumen Telbizov <rumen.telbizov@menlosecurity.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220812153727.224500-3-quentin@isovalent.com
Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where
packets are corrupted for the second and any further sockets bound to
the same umem. In other words, this does not affect the first socket
bound to the umem. The culprit for this bug is that the initialization
of the DMA addresses for the pre-populated xsk buffer pool entries was
not performed for any socket but the first one bound to the umem. Only
the linear array of DMA addresses was populated. Fix this by populating
the DMA addresses in the xsk buffer pool for every socket bound to the
same umem.
Fixes: 94033cd8e7 ("xsk: Optimize for aligned case")
Reported-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Reported-by: Intrusion Shield Team <dnevil@intrusion.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/xdp-newbies/6205E10C-292E-4995-9D10-409649354226@outlook.com/
Link: https://lore.kernel.org/bpf/20220812113259.531-1-magnus.karlsson@gmail.com
On older z series machines (z12 and older) there is no QCI info
available. The AP code took care of this and the AP bus scan then
switched to simple probing via TAPQ.
With commit
283915850a ("s390/ap: notify drivers on config changed and scan complete callbacks")
some code was introduced which silently assumed that the QCI info is
always available. However, with KVM simulating an older machine (z12)
the result was a kernel crash. Funnily the same crash does not happen
on LPAR - maybe because NULL is a valid pointer and reading some data
from address 0 also works fine.
This fix now improves the code to be aware that the QCI instruction
may not be available on older machines and thus the two pointers to
QCI info structs may simple be NULL.
However, on a machine not providing the QCI info the two callbacks to
the zcrypt device drivers on_config_changed() and on_scan_complete()
provide parameters which are pointers to a QCI info struct.
These both callbacks are NOT served if there is no QCI info available.
The only consumer of these callbacks is the vfio device driver. This
driver only supports CEX4 and higher. All physical machines which are
able to provide CEX4 cards have QCI support available. So there is
no sense in for example fill the QCI info struct by hand with looping
over cards and queues and TAPQ each APQN.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 283915850a ("s390/ap: notify drivers on config changed and scan complete callbacks")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When booting under KVM the following error messages are issued:
hypfs.7f5705: The hardware system does not support hypfs
hypfs.7a79f0: Initialization of hypfs failed with rc=-61
Demote the severity of first message from "error" to "info" and issue
the second message only in other error cases.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220620094534.18967-1-jgross@suse.com
[arch/s390/hypfs/hypfs_diag.c changed description]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Only report a button state change if the interrupt status shows that
there was a button event.
Previously the code would always drop into the button reporting at the
end of interrupt handling if the jack was present. If neither of the
button report interrupts were pending it would report all buttons
released. This could then lead to a button being reported as released
while it is still pressed.
Fixes: c5b8ee0879 ("ASoC: cs42l42: Report jack and button detection")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815123138.3810249-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we don't clear MSDC interrupts when cqe off/disable, which led
to the data complete interrupt will be reserved for the next command.
If the next command with data transfer after cqe off/disable, we process
the CMD ready interrupt and trigger DMA start for data, but the data
complete interrupt is already exists, then SW assume that the data transfer
is complete, SW will trigger DMA stop, but the data may not be transmitted
yet or is transmitting, so we may encounter the following error:
mtk-msdc 11230000.mmc: CMD bus busy detected.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Fixes: 88bd652b3c ("mmc: mediatek: command queue support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220728080048.21336-1-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The MHU secure interrupt exists physically but is missing in the DT node.
Specify the interrupt in DT node to fix a warning on Arm Juno board:
mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short
Link: https://lore.kernel.org/r/20220801141005.599258-1-jassisinghbrar@gmail.com
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The 'slave-mode' property is not valid under 'in-ports' as it was the
legacy way to find input ports. Warnings are generated from the Coresight
schema:
arch/arm64/boot/dts/arm/juno-r1.dtb: funnel@20150000: in-ports:port@0:endpoint: Unevaluated properties are not allowed ('slave-mode' was unexpected)
From schema: Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
Link: https://lore.kernel.org/r/20220721212952.1984382-1-robh@kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add software nodes for the HID sensor collection and the UCM UCSI HID
client to the Surface Pro 8. In contrast to the type-cover devices,
these devices are directly attached to the SAM controller, without any
hub.
This enables support for HID-based sensors, including the ones used for
automatic screen rotation, on the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Windows, the HID devices with target ID 1 are grouped as "Surface Hot
Plug - SAM". Rename their device nodes in the registry to reflect that
and update the comments accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename HID device nodes based on their function. In particular, these
are nodes for firmware updates via the CFU mechanism (component firmware
update), HID based sensors, and a USB-C UCSI client.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some of the older platforms with _HID "AMDI0100" PMF driver can be force
loaded by interested users but only for experimental purposes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The transition to auto-mode happens when the PMF driver receives
AMT (Auto Mode transition) event. transition logic will reside in the
PMF driver but the events would come from other supported drivers[1].
The thermal parameters would vary between when a performance "on-lap" mode
is detected and versus when not. The CQL event would get triggered from
other drivers, so that PMF driver would adjust the system thermal config
based on the ACPI inputs.
OEMs can control whether or not to enable AMT or CQL via other supported
drivers[1] but the actual transition logic resides in the AMD PMF driver.
When an AMT event is received the automatic mode transition RAPL algorithm
will run. When a CQL event is received an performance "on-lap" mode will
be enabled and thermal parameters will be adjusted accordingly.
[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This feature has 3 modes quiet, balanced, performance
The objective of this feature is to track the moving average of system
power over the time period specified and switch to the subsequent mode.
In order to do this, PMF driver will get the moving average of APU power
from PMFW and power threshold, time constants, system config parameters
from OEM inputs.
System power as read by PMF driver from PMFW is the filtered value over
the sampling window. Every sampling window, moving average of system power
is computed. At the end of the monitoring window, the moving average is
compared against the threshold for mode switch for decision making.
With AMD managing the system config limits, any mode switch within
auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled
down.
When "auto mode" is enabled, the static slider control remains out of
the PMF driver, so the platform_profile registration would not
happen in PMF driver.
The transition to auto-mode only happens when the APMF fn5 is enabled
in BIOS, platform_profile set to "balanced" and a AMT
(Auto Mode transition) is received.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver polls for metrics information from PMFW to understand the system
behavior, power consumption etc.
This metrics table information will be used the PMF features to tweak the
thermal heuristics. The poll duration can also be changed by the user
by changing the poll duration time.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>