Commit graph

1,188,286 commits

Author SHA1 Message Date
Satya Priya
76659e203f dt-bindings: mfd: qcom-pm8xxx: Update the maintainers section
Update the maintainers section with latest mail ID.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1655874639-11273-2-git-send-email-quic_c_skakit@quicinc.com
2022-07-19 10:54:40 +01:00
Lee Jones
915696927c mfd: pm8008: Remove driver data structure pm8008_data
Maintaining a local driver data structure that is never shared
outside of the core device is an unnecessary complexity.  Half of the
attributes were not used outside of a single function, one of which
was not used at all.  The remaining 2 are generic and can be passed
around as required.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-07-19 10:54:40 +01:00
Uwe Kleine-König
4a346a03a6 mfd: twl: Remove platform data support
There is no in-tree machine that provides a struct twl4030_platform_data
since commit e92fc4f04a ("ARM: OMAP2+: Drop legacy board file for
LDP"). So assume dev_get_platdata() returns NULL in twl_probe() and
simplify accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220614152148.252820-1-u.kleine-koenig@pengutronix.de
2022-07-19 10:54:40 +01:00
Saravanan Sekar
4907f6991e dt-bindings: mfd: Add mp2733 compatible
Add new compatible for mp2733 mfd driver.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220615145357.2370044-3-sravanhome@gmail.com
2022-07-19 10:54:40 +01:00
Krzysztof Kozlowski
7eeed20360 dt-bindings: mfd: qcom,tcsr: Add qcom,tcsr-mdm9615
Document the (already used) TCSR on MDM9615.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220607133443.182468-2-krzysztof.kozlowski@linaro.org
2022-07-19 10:54:40 +01:00
Krzysztof Kozlowski
7677ed11e9 dt-bindings: mfd: qcom,tcsr: Convert to dtschema
Convert the Qualcomm Top Control and Status Register to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220607133443.182468-1-krzysztof.kozlowski@linaro.org
2022-07-19 10:54:39 +01:00
Tinghan Shen
66ee379d74 mfd: cros_ec: Add SCP Core-1 as a new CrOS EC MCU
MT8195 System Companion Processors(SCP) is a dual-core RISC-V MCU.
Add a new CrOS feature ID to represent the SCP's 2nd core.

The 1st core is referred to as 'core 0', and the 2nd core is referred
to as 'core 1'.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601112201.15510-16-tinghan.shen@mediatek.com
2022-07-19 10:54:39 +01:00
Fabien Parent
738654be3c mfd: mt6358-irq: Add MT6357 PMIC support
Add MT6357 PMIC IRQ support.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220531124959.202787-6-fparent@baylibre.com
2022-07-19 10:54:39 +01:00
Fabien Parent
de58cee8c6 mfd: mt6397-core: Add MT6357 PMIC support
Adds support for PMIC keys, Regulator, and RTC for the MT6357 PMIC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220531124959.202787-5-fparent@baylibre.com
2022-07-19 10:54:39 +01:00
AngeloGioacchino Del Regno
52298ec34c dt-bindings: mfd: Add compatible for MT6331 PMIC
Add a compatible for the MT6331 PMIC MFD device.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220520124039.228314-5-angelogioacchino.delregno@collabora.com
2022-07-19 10:54:39 +01:00
Uwe Kleine-König
9875ab53c8 dt-bindings: mfd: stm32-timers: Document how to specify interrupts
The timer units in the stm32mp1 CPUs have interrupts, depending on the
timer flavour either one "global" or four dedicated ones. Document how
to formalize these in a device tree.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220519162838.695404-1-u.kleine-koenig@pengutronix.de
2022-07-19 10:54:39 +01:00
Miaoqian Lin
1520669c82 mfd: max77620: Fix refcount leak in max77620_initialise_fps
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 327156c593 ("mfd: max77620: Add core driver for MAX77620/MAX20024")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601043222.64441-1-linmq006@gmail.com
2022-07-19 10:54:39 +01:00
Lukas Bulwahn
34b1a65ec1 MAINTAINERS: Fix file entry for MAX77693 DT
Commit b38213c611 ("dt-bindings: mfd: maxim,max77693: Convert to
dtschema") converts max77693.txt to maxim,max77693.yaml and adjusts the
file entry in MAINTAINERS accordingly.

Unfortunately, the merge commit afb67df31a ("Merge branches [...] into
ibs-for-mfd-merged") resolves some conflict in MAINTAINERS in such a way
that the file entry for the converted text file max77693.txt, removed in
the commit above, is added back into MAINTAINERS.

Remove the file entry to this converted text file in MAXIM PMIC AND MUIC
DRIVERS FOR EXYNOS BASED BOARDS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601073511.15721-1-lukas.bulwahn@gmail.com
2022-07-19 10:54:39 +01:00
Andy Shevchenko
7ff7d5ffb7 syscon: Use %pa to format the variable of resource_size_t type
Instead of explicit casting, use %pa specifier to format
the variable of resource_size_t type.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220531202404.70282-1-andriy.shevchenko@linux.intel.com
2022-07-19 10:54:39 +01:00
Uwe Kleine-König
6e1f1b1c93 mfd: tc6387xb: Drop disable callback that is never called
The driver never calls the disable callback, so drop the member from
the platform struct and all callbacks from the actual platform datas.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530192430.2108217-4-u.kleine-koenig@pengutronix.de
2022-07-19 10:54:38 +01:00
Uwe Kleine-König
128ac294e1 mfd: t7l66xb: Drop platform disable callback
None of the in-tree instantiations of struct t7l66xb_platform_data
provides a disable callback. So better don't dereference this function
pointer unconditionally. As there is no user, drop it completely instead
of calling it conditional.

This is a preparation for making platform remove callbacks return void.

Fixes: 1f192015ca ("mfd: driver for the T7L66XB TMIO SoC")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de
2022-07-19 10:54:38 +01:00
Uwe Kleine-König
2598f6ec54 mfd: asic3: Make asic3_gpio_remove() return void
Up to now asic3_gpio_remove() returns zero unconditionally. This makes it
easier to see in the caller that there is no error to handle.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530192430.2108217-2-u.kleine-koenig@pengutronix.de
2022-07-19 10:54:38 +01:00
Andy Shevchenko
2cc285008a MAINTAINERS: Update Intel PMIC (MFD part) to Supported
The actual status of the code is Supported.

Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530120015.70543-1-andriy.shevchenko@linux.intel.com
2022-07-19 10:54:38 +01:00
Rahul T R
3e26292d11 dt-bindings: mfd: ti,j721e-system-controller: Add clock property
Add a pattern property for clock-controller, also update the example
with a clock-controller node

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530101031.11357-2-r-ravikumar@ti.com
2022-07-19 10:54:38 +01:00
Conor Dooley
361104b056 dt-bindings: mfd: Convert da9063 to yaml
Convert the dt binding for the da9063/da9063l to yaml.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220606201343.514391-4-mail@conchuod.ie
2022-07-19 10:54:38 +01:00
Luca Ceresoli
62fa5c9800 mfd: max77714: Update Luca Ceresoli's e-mail address
My Bootlin address is preferred from now on.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220603155727.1232061-4-luca@lucaceresoli.net
2022-07-19 10:54:38 +01:00
Lee Jones
c1cd6c305e Merge branches 'ib-mfd-acpi-for-rafael-5.20', 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-5.20' and 'ib-mfd-soc-bcm-5.20' into ibs-for-mfd-merged 2022-07-19 10:53:48 +01:00
John Johansen
2504db2071 apparmor: fix overlapping attachment computation
When finding the profile via patterned attachments, the longest left
match is being set to the static compile time value and not using the
runtime computed value.

Fix this by setting the candidate value to the greater of the
precomputed value or runtime computed value.

Fixes: 21f6066105 ("apparmor: improve overlapping domain attachment resolution")
Signed-off-by: John Johansen <john.johansen@canonical.com>
2022-07-19 02:52:36 -07:00
Hristo Venev
d7241f679a be2net: Fix buffer overflow in be_get_module_eeprom
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.

Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once.

Fixes: e36edd9d26 ("be2net: add ethtool "-m" option support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19 11:51:16 +02:00
Maíra Canal
f2ac0a8f8a backlight: lp855x: Switch to atomic PWM API
Remove legacy PWM interface (pwm_config, pwm_enable, pwm_disable) and
replace it for the atomic PWM API.

Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220714215334.78226-1-mairacanal@riseup.net
2022-07-19 10:49:27 +01:00
Lee Jones
2654f59b53 dt-bindings: backlight: Update Lee Jones' email address
Going forward, I'll be using my kernel.org for upstream work.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20220714112533.539910-7-lee@kernel.org
2022-07-19 10:49:23 +01:00
John Johansen
3bbb7b2e9b apparmor: fix setting unconfined mode on a loaded profile
When loading a profile that is set to unconfined mode, that label
flag is not set when it should be. Ensure it is set so that when
used in a label the unconfined check will be applied correctly.

Fixes: 038165070a ("apparmor: allow setting any profile into the unconfined state")
Signed-off-by: John Johansen <john.johansen@canonical.com>
2022-07-19 02:43:12 -07:00
Yang Li
f378973698 apparmor: Fix some kernel-doc comments
Remove warnings found by running scripts/kernel-doc, which is caused by
using 'make W=1'.
security/apparmor/policy_ns.c:65: warning: Function parameter or member 'curr' not described in 'aa_ns_name'
security/apparmor/policy_ns.c:65: warning: Function parameter or member 'view' not described in 'aa_ns_name'
security/apparmor/policy_ns.c:65: warning: Function parameter or member 'subns' not described in 'aa_ns_name'
security/apparmor/policy_ns.c:65: warning: expecting prototype for aa_na_name(). Prototype was for aa_ns_name() instead
security/apparmor/policy_ns.c:214: warning: Function parameter or member 'view' not described in '__aa_lookupn_ns'
security/apparmor/policy_ns.c:214: warning: Excess function parameter 'base' description in '__aa_lookupn_ns'
security/apparmor/policy_ns.c:297: warning: expecting prototype for aa_create_ns(). Prototype was for __aa_find_or_create_ns() instead

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2022-07-19 02:39:15 -07:00
Souptick Joarder (HPE)
a3f215ef08 apparmor: Mark alloc_unconfined() as static
Kernel test robot throws below warning ->
security/apparmor/policy_ns.c:83:20: warning: no previous prototype
for function 'alloc_unconfined' [-Wmissing-prototypes]

Mark it as static.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2022-07-19 02:38:34 -07:00
Thomas Bogendoerfer
c4371c5639 gpio: remove VR41XX related gpio driver
Commit d3164e2f3b ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 11:27:06 +02:00
Haibo Chen
b8c768ccdd gpio: pca953x: use the correct register address when regcache sync during init
For regcache_sync_region, we need to use pca953x_recalc_addr() to get
the real register address.

Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 11:20:41 +02:00
Mika Westerberg
90c517f435 mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
The Intel SPI controller does not support low level operations, like
reading the flag status register (FSR). It only exposes a set of high
level operations for software to use. For this reason check the return
value of micron_st_nor_read_fsr() and if the operation was not
supported, use the status register value only. This allows the chip to
work even when attached to Intel SPI controller (there are such systems
out there).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220506105158.43613-1-mika.westerberg@linux.intel.com
2022-07-19 12:20:23 +03:00
Haibo Chen
2abc17a938 gpio: pca953x: use the correct range when do regmap sync
regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.

Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.

Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 11:19:16 +02:00
Haibo Chen
db8edaa09d gpio: pca953x: only use single read/write for No AI mode
For the device use NO AI mode(not support auto address increment),
only use the single read/write when config the regmap.

We meet issue on PCA9557PW on i.MX8QXP/DXL evk board, this device
do not support AI mode, but when do the regmap sync, regmap will
sync 3 byte data to register 1, logically this means write first
data to register 1, write second data to register 2, write third data
to register 3. But this device do not support AI mode, finally, these
three data write only into register 1 one by one. the reault is the
value of register 1 alway equal to the latest data, here is the third
data, no operation happened on register 2 and register 3. This is
not what we expect.

Fixes: 4942723276 ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 11:18:08 +02:00
John Garry
0568e61225 ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
ATA devices (struct ata_device) have a max_sectors field which is
configured internally in libata. This is then used to (re)configure the
associated sdev request queue max_sectors value from how it is earlier set
in __scsi_init_queue(). In __scsi_init_queue() the max_sectors value is set
according to shost limits, which includes host DMA mapping limits.

Cap the ata_device max_sectors according to shost->max_sectors to respect
this shost limit.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-19 11:11:49 +02:00
John Garry
4cbfca5f77 scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.

For performance reasons set the request queue max_sectors from
dma_opt_mapping_size(), which knows this mapping limit.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-19 11:11:49 +02:00
John Garry
608128d391 scsi: sd: allow max_sectors be capped at DMA optimal size limit
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.

New member Scsi_Host.opt_sectors is added, which is the optimal host
max_sectors, and use this value to cap the request queue max_sectors when
set.

It could be considered to have request queues io_opt value initially
set at Scsi_Host.opt_sectors in __scsi_init_queue(), but that is not
really the purpose of io_opt.

Finally, even though Scsi_Host.opt_sectors value should never be greater
than the request queue max_hw_sectors value, continue to limit to this
value for safety.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-19 11:11:49 +02:00
Zheyu Ma
06674fc7c0 iio: light: isl29028: Fix the warning in isl29028_remove()
The driver use the non-managed form of the register function in
isl29028_remove(). To keep the release order as mirroring the ordering
in probe, the driver should use non-managed form in probe, too.

The following log reveals it:

[   32.374955] isl29028 0-0010: remove
[   32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[   32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[   32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[   32.385461] Call Trace:
[   32.385807]  sysfs_unmerge_group+0x59/0x110
[   32.386110]  dpm_sysfs_remove+0x58/0xc0
[   32.386391]  device_del+0x296/0xe50
[   32.386959]  cdev_device_del+0x1d/0xd0
[   32.387231]  devm_iio_device_unreg+0x27/0xb0
[   32.387542]  devres_release_group+0x319/0x3d0
[   32.388162]  i2c_device_remove+0x93/0x1f0

Fixes: 2db5054ac2 ("staging: iio: isl29028: add runtime power management support")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220717004241.2281028-1-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:42:11 +01:00
Marek Vasut
42542c7904 drm/panel/panel-sitronix-st7701: Split GIP and init sequences
The ST7701 initialization sequence is well parametrized, split the GIP
programming sequence, which is fully custom completely undocumented
TFT matrix specific magic register programming sequence into separate
callback so other TFT matrix definitions can add their own GIP sequence.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-9-marex@denx.de
2022-07-19 10:39:02 +02:00
Marek Vasut
83b7a8e7e8 drm/panel/panel-sitronix-st7701: Parametrize voltage and timing
Instead of hard-coding TFT matrix voltage and timing settings, which can
even lead to permanent TFT matrix damage, parametrize them in TFT matrix
descriptor.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-8-marex@denx.de
2022-07-19 10:39:01 +02:00
Marek Vasut
de2b491784 drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode
The horizontal pixel count is a property of the TFT matrix. Currently the
driver hard-codes content of this register to specific value which is
only compatible with one TFT matrix, likely the TS8550B one.

Calculate the horizontal pixel count from the mode instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-7-marex@denx.de
2022-07-19 10:39:00 +02:00
Marek Vasut
82f9cee255 drm/panel/panel-sitronix-st7701: Adjust porch control bitfield name
Define DSI_CMD2_BK0_PORCTRL_VBP_MASK and DSI_CMD2_BK0_PORCTRL_VFP_MASK
and move the vertical back and front porch calculation from macros into
the st7701_init_sequence() function, so it is clear what this does.

No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-6-marex@denx.de
2022-07-19 10:38:59 +02:00
Marek Vasut
1ba85119af drm/panel/panel-sitronix-st7701: Infer vertical line count from TFT mode
The vertical line count is a property of the TFT matrix. Currently the
driver hard-codes content of this register to specific value which is
only compatible with one TFT matrix, likely the TS8550B one.

Calculate the vertical line count from the mode instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-5-marex@denx.de
2022-07-19 10:38:57 +02:00
Marek Vasut
779c84fea3 drm/panel/panel-sitronix-st7701: Make gamma correction TFT specific
The gamma correction values are specific to the TFT which is attached to
the ST7701 TFT matrix driver, move the gamma correction values from what
incorrectly looks like common init sequence into TFT matrix specific
settings.

While doing so, add macros which defined fields within the gamma register
file and a macro which mimics FIELD_PREP except works with constant
expressions.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-4-marex@denx.de
2022-07-19 10:38:56 +02:00
Marek Vasut
7fa8e07128 drm/panel/panel-sitronix-st7701: Make voltage supplies common to ST7701
The ST7701 and ST7701S all have two voltage supplies, one for internal
logic and one for the TFT matrix driver. The supplies are not property
of the TFT matrix driver, so move them to common ST7701 code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-3-marex@denx.de
2022-07-19 10:38:55 +02:00
Marek Vasut
a6c225be3d drm/panel/panel-sitronix-st7701: Enable DSI burst mode, LPM, non-continuous clock
The ST7701(S) is capable of DSI burst mode, which is more energy
efficient than the non-burst modes. Make use of it.

The ST7701(S) is capable of DSI non-continuous clock, since it
sources the TFT matrix driver clock from internal clock source.
The DSI non-continuous clock further reduce power utilization.

The ST7701(S) uses DSI LPM for command transmissions, make sure
this is configured correctly in the DSI mode flags.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-2-marex@denx.de
2022-07-19 10:38:54 +02:00
LI Qingwu
3cfb0e1d39 iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
After added inclination angle channels, the trigger buffer size is
insufficient. Extend the buffer size from 16 to 32 bytes, and change
the trigger buffer from the struct to a u8 array to adapt the sensor
with/without inclination angles output.
New trigger buffer data:
  - SCA3300: 3 accel channels, temp, and timestamp.
  - SCL3300: 3 accel channels, temp, 3 incli channels, and timestamp.
Readjustment the scan index to make it consistent with the buffer data.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20220701023030.2527019-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:38:53 +01:00
Marek Vasut
6f481afe22 drm/panel/panel-sitronix-st7701: Make DSI mode flags common to ST7701
The ST7701 and ST7701S are TFT matrix drivers with integrated multi
protocol decoder capable of DSI/DPI/SPI input and 480x360...864 line
TFT matrix output. Currently the only supported input is DSI.

The protocol decoder is separate from the TFT matrix driver and is
always capable of handling all of DSI non-burst mode with sync pulses
or sync events as well as DSI burst mode.

Move the DSI mode configuration from TFT matrix driver properties to
common ST7701 code, because this is common to all TFT matrices.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-1-marex@denx.de
2022-07-19 10:38:52 +02:00
Fawzi Khaber
5e1f918503 iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio_format_avail_range() should print range as follow [min, step, max], so
the function was previously calling iio_format_list() with length = 3,
length variable refers to the array size of values not the number of
elements. In case of non IIO_VAL_INT values each element has integer part
and decimal part. With length = 3 this would cause premature end of loop
and result in printing only one element.

Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Fixes: eda20ba1e2 ("iio: core: Consolidate iio_format_avail_{list,range}()")
Link: https://lore.kernel.org/r/20220718130706.32571-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:31:27 +01:00
Xiao Yang
68691bad98 RDMA/rxe: Remove unused qp parameter
The qp parameter in free_rd_atomic_resource() has become
unused so remove it directly.

Fixes: 15ae1375ea ("RDMA/rxe: Fix qp reference counting for atomic ops")
Link: https://lore.kernel.org/all/20220708035547.6592-1-yangx.jy@fujitsu.com/
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-19 11:31:09 +03:00