Commit graph

1,188,286 commits

Author SHA1 Message Date
Peter Ujfalusi
b9cb044f35
ASoC: SOF: ipc3-loader: Print out the non matching ext_man magic number
Print out the found extended manifest magic number in case it is not
matching with the expected one (0x6e614d58) in debug level.
It is fairly unlikely that the firmware does not have ext_man section and
the found value in place of the magic number can help rootcausing boot
related issues.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-15 20:11:34 +01:00
Rander Wang
dc6137a56a
ASoC: SOF: ipc4-topology: set domain bit based on dp domain type
Currently the domain bit in ipc msg for module initialization is
set to lp (low power) mode for pipeline. This is not correct since
it is for module domain type:  ll domain or dp domain which are for
scheduler in fw. If the domain bit is set to 1 fw will process the
module in dp domain or deal it with ll domain. So set domain bit
based on dp domain setting.

Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-15 20:11:33 +01:00
Rander Wang
b85f4fc40d
ASoC: SOF: add ipc4 SRC module support
SRC module only needs two parameters : base module config
and sink rate. This patch adds prepare and setup for SRC
widgets.

Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-15 20:11:32 +01:00
Rander Wang
bdb803c828
ASoC: SOF: ipc4-pcm: set pcm rate to dai setting
Dsp converts pcm rate to the one defined by dai. When SRC
is used, the pcm runtime rate is different with dai rate
and we need to fix it up for BE components.

Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-15 20:11:31 +01:00
Bard Liao
711d0427c7
ASoC: SOF: ipc4-topology: move ida allocate/free to widget_setup/free
The existing code allocate/release instance_id in widget ipc_prepare/
ipc_unprepare callbacks and creating widget with the instance_id in
tplg widget_setup callback. In the case of multiple widgets connecting
to one widget, the ipc_unprepare will be invoked for all the widgets
in the path including the widget which is still in use.
As a result, the instance_id is released in the ipc_unprepare callback,
but the widget is still in use and the instance_id will be reused by
a new widget when we start the PCM again.
Moving the ida work from ipc_prepare/ipc_unprepare to widget_setup/free
can avoid such problem.

Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-15 20:11:30 +01:00
Yong Zhi
740e5d8713
ASoC: SOF: Intel: MTL: remove redundant snd_sof_dsp_read() call
Drop redundant CPA bit check after polling the same condition.

Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-15 20:11:29 +01:00
Bart Van Assche
020e3618cc blktrace: Fix the blk_fill_rwbs() kernel-doc header
Reflect recent changes in the blk_fill_rwbs() kernel-doc header.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 919dbca867 ("blktrace: Use the new blk_opf_t type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220715184735.2326034-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-15 13:10:04 -06:00
Bart Van Assche
f54541403b fs/buffer: Fix the ll_rw_block() kernel-doc header
Bring the ll_rw_block() kernel-doc header again in sync with the
function prototype.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 1420c4a549 ("fs/buffer: Combine two submit_bh() and ll_rw_block() arguments")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220715184735.2326034-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-15 13:10:04 -06:00
Mark Brown
c3fc63479e
ASoC: SOF: Intel: add support for SoundWire-based HP Omen16
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

This device exposes a headset codec on link0 and an amplifier on
link3. This is a very unusual pin-muxing, usually the microphones are
pin-muxed with link2/link3. This resulted in a problematic error
handling leading to a kernel oops, and invalidated a hard-coded
assumption.

Full support for this device requires a DMI quirk shared separately
("soundwire: dmi-quirks: add remapping for HP Omen 16-k0005TX").
2022-07-15 20:07:01 +01:00
Andrii Nakryiko
8eab0a09a2 Merge branch 'Use lightweigt version of bpftool'
Pu Lehui says:

====================

Currently, samples/bpf, tools/runqslower and bpf/iterators use bpftool
for vmlinux.h, skeleton, and static linking only. We can use lightweight
bootstrap version of bpftool to handle these, and it will be faster.

v2:
- make libbpf and bootstrap bpftool independent. and make it simple.

v1: https://lore.kernel.org/bpf/20220712030813.865410-1-pulehui@huawei.com
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2022-07-15 12:03:25 -07:00
Pu Lehui
3848636b4a bpf: iterators: Build and use lightweight bootstrap version of bpftool
kernel/bpf/preload/iterators use bpftool for vmlinux.h, skeleton, and
static linking only. So we can use lightweight bootstrap version of
bpftool to handle these, and it will be faster.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220714024612.944071-4-pulehui@huawei.com
2022-07-15 12:01:30 -07:00
Pu Lehui
3a2a58c447 tools: runqslower: Build and use lightweight bootstrap version of bpftool
tools/runqslower use bpftool for vmlinux.h, skeleton, and static linking
only. So we can use lightweight bootstrap version of bpftool to handle
these, and it will be faster.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220714024612.944071-3-pulehui@huawei.com
2022-07-15 12:01:30 -07:00
Pu Lehui
2e4966288c samples: bpf: Fix cross-compiling error by using bootstrap bpftool
Currently, when cross compiling bpf samples, the host side cannot
use arch-specific bpftool to generate vmlinux.h or skeleton. Since
samples/bpf use bpftool for vmlinux.h, skeleton, and static linking
only, we can use lightweight bootstrap version of bpftool to handle
these, and it's always host-native.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220714024612.944071-2-pulehui@huawei.com
2022-07-15 12:01:30 -07:00
Mark Brown
dfb15e4940
ASoC: Intel: Mark BE DAIs as nonatomic for hsw and
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.

This patchset iterates the change over all HSW and BDW related machine
board drivers.
2022-07-15 19:56:10 +01:00
Takashi Iwai
53f07e9b01 Revert "ALSA: hda: Fix page fault in snd_hda_codec_shutdown()"
This reverts commit 980b3a8790.

The commit didn't consider the fact that ASoC hdac-hda driver
initializes the HD-audio stuff without calling
snd_hda_codec_device_init().  Hence this caused a regression leading
to Oops.

Revert the commit to restore the behavior.

Fixes: 980b3a8790 ("ALSA: hda: Fix page fault in snd_hda_codec_shutdown()")
Link: https://lore.kernel.org/r/3c40df55-3aee-1e08-493b-7b30cd84dc00@linux.intel.com
Link: https://lore.kernel.org/r/20220715182903.19594-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-15 20:29:40 +02:00
Takashi Iwai
d59d2277fe Revert "ALSA: hda: cs35l41: Allow compilation test on non-ACPI configurations"
Since the recent change in CS35L41 codec requires the reference of
acpi_dev handle, the current Kconfig may lead to a build breakage.

Revert the Kconfig change and re-introduce the hard dependency on
CONFIG_ACPI again as a temporary workaround.

Fixes: eef3759602 ("ALSA: hda: cs35l41: Support reading subsystem id from ACPI")
Link: https://lore.kernel.org/r/20220715182427.18891-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-15 20:25:13 +02:00
Micah Morton
64b634830c LSM: SafeSetID: add setgroups() testing to selftest
Selftest already has support for testing UID and GID transitions.

Signed-off-by: Micah Morton <mortonm@chromium.org>
2022-07-15 18:24:42 +00:00
Micah Morton
3e3374d382 LSM: SafeSetID: Add setgroups() security policy handling
The SafeSetID LSM has functionality for restricting setuid()/setgid()
syscalls based on its configured security policies. This patch adds the
analogous functionality for the setgroups() syscall. Security policy
for the setgroups() syscall follows the same policies that are
installed on the system for setgid() syscalls.

Signed-off-by: Micah Morton <mortonm@chromium.org>
2022-07-15 18:24:42 +00:00
Micah Morton
fcfe0ac2fc security: Add LSM hook to setgroups() syscall
Give the LSM framework the ability to filter setgroups() syscalls. There
are already analagous hooks for the set*uid() and set*gid() syscalls.
The SafeSetID LSM will use this new hook to ensure setgroups() calls are
allowed by the installed security policy. Tested by putting print
statement in security_task_fix_setgroups() hook and confirming that it
gets hit when userspace does a setgroups() syscall.

Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
2022-07-15 18:21:49 +00:00
Hans de Goede
03c440a26c ACPI: video: Use native backlight on Dell Inspiron N4010
The Dell Inspiron N4010 does not have ACPI backlight control,
so acpi_video_get_backlight_type()'s heuristics return vendor as
the type to use.

But the vendor interface is broken, where as the native (intel_backlight)
works well, add a quirk to use native.

Link: https://lore.kernel.org/regressions/CALF=6jEe5G8+r1Wo0vvz4GjNQQhdkLT5p8uCHn6ZXhg4nsOWow@mail.gmail.com/
Reported-and-tested-by: Ben Greening <bgreening@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 20:07:59 +02:00
Rafael J. Wysocki
1a2dcab517 ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
If the PNP0D80 device is present and its _DSM appears to be valid,
there is no reason to avoid using it even if ACPI_FADT_LOW_POWER_S0
is unset in the FADT, because suspend-to-idle may be the only way to
suspend the system if S3 is not supported by the platform, so do not
return early from lps0_device_attach() in that case.

However, still check ACPI_FADT_LOW_POWER_S0 when deciding whether or
not suspend-to-idle should be the default system suspend method.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
2022-07-15 20:04:19 +02:00
Rafael J. Wysocki
403dbe3a53 Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
Revert commit 1cdda9486f ("ACPI / PM: LPIT: Register sysfs attributes
based on FADT"), because what it did was more confusing than it would
be to allow the sysfs attributes in question to be created regardless
of whether or not the relevant flag was set in the FADT.

If ACPI_FADT_LOW_POWER_S0 is not set, it need not mean that LPIT is
invalid and low-power S0 idle is not usable.  It merely means that
using S3 on the given system is more beneficial from the energy
saving perspective than using low-power S0 idle.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
2022-07-15 20:04:07 +02:00
Marc Ferland
03508eea53 hwmon: (mcp3021) improve driver support for newer hwmon interface
This driver is currently broken, it does not show the in0_input sysfs
file and also returns the following message on startup:

hwmon_device_register() is deprecated. Please convert the driver to
use hwmon_device_register_with_info().

This patch converts the driver and also cleans up the 'read' function.

Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Link: https://lore.kernel.org/r/20220712193504.1374656-1-ferlandm@amotus.ca
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-15 10:55:57 -07:00
Zhuo Chen
ca415ea1f0 ice: Remove pci_aer_clear_nonfatal_status() call
After commit 62b36c3ea6 ("PCI/AER: Remove
pci_cleanup_aer_uncorrect_error_status() calls"), calls to
pci_cleanup_aer_uncorrect_error_status() have already been removed. But in
commit 5995b6d0c6 ("ice: Implement pci_error_handler ops")
pci_cleanup_aer_uncorrect_error_status  was used again, so remove it in
this patch.

Signed-off-by: Zhuo Chen <chenzhuo.1@bytedance.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sen Wang <wangsen.harry@bytedance.com>
Cc: Wenliang Wang <wangwenliang.1995@bytedance.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-15 10:41:39 -07:00
Anirudh Venkataramanan
896a55aa52 ice: Add EXTTS feature to the feature bitmap
External time stamp sources are supported only on certain devices. Enforce
the right support matrix by adding the ICE_F_PTP_EXTTS bit to the feature
bitmap set.

Co-developed-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-15 10:41:39 -07:00
Linus Torvalds
9b59ec8d50 RISC-V Fixes for 5.19-rc7
* A fix to avoid printing a warning when modules do not exercise any
   errata-dependent behavior and the SiFive errata are enabled.
 * A fix to the Microchip PFSOC to attach the L2 cache to the CPU nodes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmLRngwTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiUR9EAC+X+a9S2GFQixKioNUxvA/6BRUnpn3
 lR8DK4Ca8P30NMKymBiMNkppsp/zV9eWqf2w4LnjhGawbJSCGFTV5ghnJ2gb/qYD
 HP9IxR2qvxk4RjnK7wViJ67e6NZDuSObZ5uYaDdo5y003JjoVxcX2fOzx0mMIpNj
 EWXlqYELXOY/D3c5iypMAtgWiulnWbb3WlcgSuCVuayyxxIES5jWaeGYF9F0ppyu
 TGjvh4PVnupUmcTX/JmH8J7BHOJeE/yrqd6w23pBkyQnOBjhUjkjf4PyuLdJFnOm
 9KeBewLuQNXOVInSeuv8FJtEI0yJ9WhP4k5Gc7l9M9GG8a8QIws/VJ+PJnY5Lh+O
 macWHygAG3ZmgIWM+zdTOTwENLxW0OXOdQHRKk4b0bNwKCbQMDsJVEBCuQwwjHMY
 +zxVBU+4JUjJnIo89Lhlx3fnHgUaoNrITqGNtAxeYqIppR+7Lj7ORaKYU1dPYwyC
 1S823/GDD2jnZz8uQYdrxu/Zzcd4s7VWHtWU0CqpblvxIeeYyqCsCcXvSs9ojACU
 Dqc3omP8Y4Fj/UnCUm4OwnrrT3qIQo2oSEOnsWViTkYNWWlYVCxE0fkXBZ1R9T6f
 wOQ2FqPG5jP8B0TD8U3QSnCliPotfOxY+h0TnDpLLGu070MKTHpq3dECLikPbh39
 cXw3DP83dB12mg==
 =54Dc
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid printing a warning when modules do not exercise any
   errata-dependent behavior and the SiFive errata are enabled.

 - A fix to the Microchip PFSOC to attach the L2 cache to the CPU nodes.

* tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: don't warn for sifive erratas in modules
  riscv: dts: microchip: hook up the mpfs' l2cache
2022-07-15 10:40:50 -07:00
Steven Rostedt (Google)
43b2aef373 neighbor: tracing: Have neigh_create event use __string()
The dev field of the neigh_create event uses __dynamic_array() with a
fixed size, which defeats the purpose of __dynamic_array(). Looking at the
logic, as it already uses __assign_str(), just use the same logic in
__string to create the size needed. It appears that because "dev" can be
NULL, it needs the check. But __string() can have the same checks as
__assign_str() so use them there too.

Link: https://lkml.kernel.org/r/20220705183741.35387e3f@rorschach.local.home

Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-15 13:35:59 -04:00
Steven Rostedt (Google)
fca8300f68 tracing/ipv4/ipv6: Use static array for name field in fib*_lookup_table event
The fib_lookup_table and fib6_lookup_table events declare name as a
dynamic_array, but also give it a fixed size, which defeats the purpose of
the dynamic array, especially since the dynamic array also includes meta
data in the event to specify its size.

Since the size of the name is at most 16 bytes (defined by IFNAMSIZ),
it is not worth spending the effort to determine the size of the string.

Just use a fixed size array and copy into it. This will save 4 bytes that
are used for the meta data that saves the size and position of a dynamic
array, and even slightly speed up the event processing.

Link: https://lkml.kernel.org/r/20220704091436.3705edbf@rorschach.local.home

Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-15 13:35:59 -04:00
Micah Morton
a1732d6898 LSM: SafeSetID: add GID testing to selftest
GID security policies were added back in v5.10, update the selftest to
reflect this.

Signed-off-by: Micah Morton <mortonm@chromium.org>
2022-07-15 17:35:34 +00:00
Micah Morton
b2927170d4 LSM: SafeSetID: selftest cleanup and prepare for GIDs
Add some notes on how to run the test, update the policy file paths to
reflect recent upstream changes, prepare test for adding GID testing.

Signed-off-by: Micah Morton <mortonm@chromium.org>
2022-07-15 17:35:34 +00:00
Micah Morton
92c005a117 LSM: SafeSetID: fix userns bug in selftest
Not sure how this bug got in here but its been there since the original
merge. I think I tested the code on a system that wouldn't let me
clone() with CLONE_NEWUSER flag set so had to comment out these
test_userns invocations.

Trying to map UID 0 inside the userns to UID 0 outside will never work,
even with CAP_SETUID. The code is supposed to test whether we can map
UID 0 in the userns to the UID of the parent process (the one with
CAP_SETUID that is writing the /proc/[pid]/uid_map file).

Signed-off-by: Micah Morton <mortonm@chromium.org>
2022-07-15 17:35:34 +00:00
Todd Brandt
b3f6c43d00 pm-graph v5.9
bootgraph:
 - fix parsing of /proc/version to be much more flexible
 - check kernel version to disallow ftrace on anything older than 4.10

sleepgraph:
 - include fix to bugzilla 212761 in case it regresses
 - fix for -proc bug: https://github.com/intel/pm-graph/pull/20
 - add -debugtiming arg to get timestamps on prints
 - allow use of the netfix tool hosted in the github repo
 - read s0ix data from pmc_core for better debug
 - include more system data in the output log
 - Do a better job testing input files useability
 - flag more error data from dmesg in the timeline
 - pre-parse the trace log to fix any ordering issues
 - add new parser to process dmesg only timelines
 - remove superflous sleep(5) in multitest mode

config/custom-timeline-functions.cfg:
 - change some names to keep up to date

README:
 - new version, small wording changes

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:31:58 +02:00
Linus Torvalds
a8ebfcd33c RISC-V:
* Fix missing PAGE_PFN_MASK
 
 * Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
 
 x86:
 
 * Fix for nested virtualization when TSC scaling is active
 
 * Estimate the size of fastcc subroutines conservatively, avoiding disastrous
   underestimation when return thunks are enabled
 
 * Avoid possible use of uninitialized fields of 'struct kvm_lapic_irq'
 
 Generic:
 
 * Mark as such the boolean values available from the statistics file descriptors
 
 * Clarify statistics documentation
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLRVkcUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMm4QgAgZHQTSyA4+/xOYs0cBX2Q6YYkDGG
 yUTjiiLmXjzKmjRkfhqKO75aqGhbv08U20hfHRdxxYV5b2Ful/xEnryj+mjyEBmv
 wFO1Q8Tlwi+6Wwen+VN0tjiQwdY/N6+dI39U2Nn4yCtYyLbCALTWSlq3qr6RjhaI
 P8XFXcPweyow3GsFrwgJVJ/vA/gaAhY17NOmdI5icFioTeJbrrAYw88Cbh9PzkGS
 IsgmHn8Yt9a3x/rzo2LhhMbzsXDR87l+OlJhmGCUB5L0kRt8rJz30ysCeKgTpkoz
 QOBZPdODeJ4Pdk4Z82A7NPUAFaaGGxUMkeIoAIXJ0F/VIpKb7+l3AETlZA==
 =x3x6
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "RISC-V:
   - Fix missing PAGE_PFN_MASK

   - Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()

  x86:
   - Fix for nested virtualization when TSC scaling is active

   - Estimate the size of fastcc subroutines conservatively, avoiding
     disastrous underestimation when return thunks are enabled

   - Avoid possible use of uninitialized fields of 'struct
     kvm_lapic_irq'

  Generic:
   - Mark as such the boolean values available from the statistics file
     descriptors

   - Clarify statistics documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: emulate: do not adjust size of fastop and setcc subroutines
  KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
  Documentation: kvm: clarify histogram units
  kvm: stats: tell userspace which values are boolean
  x86/kvm: fix FASTOP_SIZE when return thunks are enabled
  KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
  RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
  riscv: Fix missing PAGE_PFN_MASK
2022-07-15 10:31:46 -07:00
Linus Torvalds
1ce9d792e8 A folio locking fixup that Xiubo and David cooperated on, marked for
stable.  Most of it is in netfs but I picked it up into ceph tree on
 agreement with David.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmLRle4THGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHziwNrB/wLIT7pDkZl2h1LclJS1WfgzgPkaOVq
 sN8RO+QH3zIx5av/b3BH/R9Ilp2M4QjWr7f5y3emVZPxV9KQ2lrUj30XKecfIO4+
 nGU3YunO+rfaUTyySJb06VFfhLpOjxjWGFEjgAO+exiWz4zl2h8dOXqYBTE/cStT
 +721WZKYR25UK7c7kp/LgRC9QhjqH1MDm7wvPOAg6CR7mw2OiwjYD7o8Ou+zvGfp
 6GimxbWouJNT+/xW2T3wIJsmQuwZbw4L4tsLSfhKTk57ooKtR1cdm0h/N7LM1bQa
 fijU36LdGJGqKKF+kVJV73sNuPIZGY+KVS+ApiuOJ/LMDXxoeuiYtewT
 =P3hf
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
 "A folio locking fixup that Xiubo and David cooperated on, marked for
  stable. Most of it is in netfs but I picked it up into ceph tree on
  agreement with David"

* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
  netfs: do not unlock and put the folio twice
2022-07-15 10:27:28 -07:00
Linus Torvalds
8006112d6c spi: Fixes for v5.19
A few driver specific fixes, none especially remarkable, plus a
 MAINTAINERS file update due to the previous maintainer for the NXP FSPI
 driver having left the company.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLRbBsACgkQJNaLcl1U
 h9AA9gf+OAayfRZrVvtaSq5024SUYym6YDRHmdUJD1Emh5VbuVHcqHZC70gdXhNu
 hHSmZti5mTHbo9fvSBiuGS9MDoxBmbFsdZ4mUwE8sKYW5vnmRlaq7cnjTNWDISwp
 CXNyUjJdgFuZWjNFlWDodNeuDMAdR2pDgOfKBwWyiCEVvypQuGq7Cp7yFud/eyvA
 eUfSYDOoI/Ws5t1XKFf8M9YBp6yaspJ9cNLFPtVIGtDTkT9SdkjqwXCWy+iDNHhi
 Nj3mciV6RA9iCi9ICr68rPsak/RxCbwOfBigFuShOc0oiQ2fhrKtVNRZuYs5/UxH
 CdMmk8sCfMyZE6HO/UUcbw/LyDKoVQ==
 =PphO
 -----END PGP SIGNATURE-----

Merge tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few driver specific fixes, none especially remarkable, plus a
  MAINTAINERS file update due to the previous maintainer for the NXP
  FSPI driver having left the company"

* tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: cadence-quadspi: Remove spi_master_put() in probe failure path
  MAINTAINERS: change the NXP FSPI driver maintainer.
  spi: amd: Limit max transfer and message size
  spi: aspeed: Fix division by zero
  spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
2022-07-15 10:23:43 -07:00
Mark Brown
1c69bbc3c1
Read _SUB from ACPI to be able to identify firmware
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:

CS35L41 has a DSP which is able to run firmware, as well as a tuning file.
Different systems may want to use different firmwares and tuning files, and
some firmwares/tunings may not be compatible with other systems.
To allow a system to select the correct fimware/tuning, we can read an _SUB
from the ACPI. This _SUB can then be used to uniquely identify the system
in the firmware/tuning file name.

Add a helper function which reads the _SUB, so this can be used by other
parts in the future.
Add support inside the CS35L41 ASoC driver to read this _SUB, and save it
appropriately.
2022-07-15 18:21:09 +01:00
Viresh Kumar
a2f6a7ac60 cpufreq: Warn users while freeing active policy
With the new design in place, the show() and store() callbacks check if
the policy is active or not before proceeding any further to avoid
potential races. And in order to guarantee that cpufreq_policy_free()
must be called after clearing the policy->cpus mask, i.e. by marking the
policy inactive.

In order to avoid introducing a bug around this later, print a warning
message if we end up freeing an active policy.

Also update cpufreq_online() a bit to make sure we clear the cpus mask
for each error case before calling cpufreq_policy_free().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:19:51 +02:00
Lukasz Luba
f3ac888fc5 cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
The SCMI v3.1 adds support for power values in micro-Watts. They are not
always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power
must be converted conditionally before sending to Energy Model. Add the
logic which handles the needed checks and conversions.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Lukasz Luba
5e0fd2026c firmware: arm_scmi: Get detailed power scale from perf
In SCMI v3.1 the power scale can be in micro-Watts. The upper layers, e.g.
cpufreq and EM should handle received power values properly (upscale when
needed). Thus, provide an interface which allows to check what is the
scale for power values. The old interface allowed to distinguish between
bogo-Watts and milli-Watts only (which was good for older SCMI spec).

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Lukasz Luba
c5d39fae89 Documentation: EM: Switch to micro-Watts scale
The EM now uses the micro-Watts scale for the power values. Update
related documentation to reflect that fact.

Fix also a problematic sentence in the doc "to:" which triggers test
scripts complaining about wrong email address.

Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Lukasz Luba
ae6ccaa650 PM: EM: convert power field to micro-Watts precision and align drivers
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.

Update all EM users which access 'power' field and assume the value is
in milli-Watts.

Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.

Example calculation which shows the rounding error and impact:

power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz

power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18

power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21

max_freq = 2000MHz

cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000

cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203

The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Linus Torvalds
1c49f281c9 ARM: SoC fixes for 5.19, part 3
Most of the contents are bugfixes for the devicetree files:
 
  - A Qualcomm MSM8974 pin controller regression, caused by a cleanup
    patch that gets partially reverted here.
 
  - Missing properties for Broadcom BCM49xx to fix timer detection and
    SMP boot.
 
  - Fix touchscreen pinctrl for imx6ull-colibri board
 
  - Multiple fixes for Rockchip rk3399 based machines including the
    vdu clock-rate fix, otg port fix on Quartz64-A and ethernet
    on Quartz64-B
 
  - Fixes for misspelled DT contents causing minor problems on
    imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10,
    and ls1028a
 
 And a couple of changes elsewhere:
 
  - Fix binding for Allwinner D1 display pipeline
 
  - Trivial code fixes to the TEE and reset controller driver subsystems
    and the rockchip platform code.
 
  - Multiple updates to the MAINTAINERS files, marking the Palm Treo
    support as orphaned, and fixing some entries for added or changed
    file names.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLRXIcACgkQmmx57+YA
 GNkEzxAAl65KpVU88zGDuX/e46T/vxRGzJXZtR+qB7DdzKLN2C0joFfbKRHQa4B5
 WrIGxpKj4hLdn2QNE3pqhj0PZb8SpE521CjVcYEeUNrTvN8DASAHD76ZgQh3onFE
 oOAY6RsAn37kGB1munbDR7ZnbclGNp4WAuhTMflNmxTiijokiod4/gbzFiD/EHIP
 XtdPQHQH/fKqleU5x033SG5evQm/b/md0qNsvzFXTN0skl0it+1eqp3OmTwq7l8s
 9AAHf6o/Kx3YoiLhi74NIKyXNJ5uRmITR7MWhn/fwZxlvvEWZwaw97QzaZW0EeT1
 vX2BdN4w3CNLxPu+rmKaet1qKYf0KnuYDwzcKFDrzjyznedn2Zyb2sB6PBT+Zp1J
 5luaAl/jccC7vQ8l/xsl1YEWwgaJC5P5iQ9PwaMxY/d/rBh+FiSZ3F5UrJfpVTl/
 h9I1WNAA7dqiywFQ6yrDuYMgeTDtFwS5bm6J8VPSw9kMiNT4snxcFlAw7py1Ls7O
 6yKvPHFJ36ACcc7Jz3IYyZeKI9G+LfMWE1AZ+n6SXCJF7QQSjVmI29K6hLukkxVq
 9hQCKdIvKhGAkhSzIHCpR69ZFvdRcAzW6yS05CHaHmyweo3kRQhd+Df2kxxEIVzG
 1plLZDk7j7oe6d1y19HweHkGiVBHynyEJR2XIgU2btY7A+R6zEI=
 =oSv+
 -----END PGP SIGNATURE-----

Merge tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the contents are bugfixes for the devicetree files:

   - A Qualcomm MSM8974 pin controller regression, caused by a cleanup
     patch that gets partially reverted here.

   - Missing properties for Broadcom BCM49xx to fix timer detection and
     SMP boot.

   - Fix touchscreen pinctrl for imx6ull-colibri board

   - Multiple fixes for Rockchip rk3399 based machines including the vdu
     clock-rate fix, otg port fix on Quartz64-A and ethernet on
     Quartz64-B

   - Fixes for misspelled DT contents causing minor problems on
     imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10, and
     ls1028a

  And a couple of changes elsewhere:

   - Fix binding for Allwinner D1 display pipeline

   - Trivial code fixes to the TEE and reset controller driver
     subsystems and the rockchip platform code.

   - Multiple updates to the MAINTAINERS files, marking the Palm Treo
     support as orphaned, and fixing some entries for added or changed
     file names"

* tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
  arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
  arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
  ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
  ARM: dts: at91: sama5d2: Fix typo in i2s1 node
  tee: tee_get_drvdata(): fix description of return value
  optee: Remove duplicate 'of' in two places.
  ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
  ARM: dts: colibri-imx6ull: fix snvs pinmux group
  optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
  MAINTAINERS: add polarfire rng, pci and clock drivers
  MAINTAINERS: mark ARM/PALM TREO SUPPORT orphan
  ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
  arm64: dts: ls1028a: Update SFP node to include clock
  dt-bindings: display: sun4i: Fix D1 pipeline count
  ARM: dts: qcom: msm8974: re-add missing pinctrl
  reset: Fix devm bulk optional exclusive control getter
  MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
  ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init()
  arm64: dts: rockchip: Assign RK3399 VDU clock rate
  arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
  ...
2022-07-15 10:16:44 -07:00
David Sterba
088aea3b97 Revert "btrfs: turn delayed_nodes_tree into an XArray"
This reverts commit 253bf57555.

Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.

Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.

[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-15 19:15:19 +02:00
David Sterba
5b8418b843 Revert "btrfs: turn name_cache radix tree into XArray in send_ctx"
This reverts commit 4076942021.

Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.

Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.

[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-15 19:14:58 +02:00
David Sterba
01cd390903 Revert "btrfs: turn fs_info member buffer_radix into XArray"
This reverts commit 8ee922689d.

Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.

Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.

[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-15 19:14:33 +02:00
David Sterba
fc7cbcd489 Revert "btrfs: turn fs_roots_radix in btrfs_fs_info into an XArray"
This reverts commit 48b36a602a.

Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.

Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.

[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-15 19:14:28 +02:00
Linus Torvalds
2a347a06eb platform-drivers-x86 for v5.19-4
Highlights:
  -  Fix brightness key events getting reported twice on some Dell's
     regression caused by recent Panasonic hotkey fixes
  -  Fix poweroff no longer working on some devices regression caused
     by recent poweroff handler rework
  -  Mark new (in 5.19) Intel IFS driver as broken, because of some issues
     surrounding the userspace (sysfs) API which need to be cleared up
  -  Some hardware-id / quirk additions
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI:
  -  video: Fix acpi_video_handles_brightness_key_presses()
 
 asus-wmi:
  -  Add key mappings
 
 efi:
  -  Fix efi_power_off() not being run before acpi_power_off() when necessary
 
 gigabyte-wmi:
  -  add support for B660I AORUS PRO DDR4
 
 intel_atomisp2_led:
  -  Also turn off the always-on camera LED on the Asus T100TAF
 
 platform/x86/amd/pmc:
  -  Add new platform support
  -  Add new acpi id for PMC controller
 
 platform/x86/intel/ifs:
  -  Mark as BROKEN
 
 x86-android-tablets:
  -  Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLRTGIUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wd9Af+NQisrNn21CYMfOFPpn/r9c9mAyqA
 KoukuuxXmPUqr83QB02JELmyK3nWWCRWf2DndNwOTAi+tQeAjlzfUrAKyjPxd98r
 V5+zLm2lnxyOKFAuORd9xrTevfk/sjaasGbvBt2Y0c0iqNcZBg62cDDbMEM3bMX3
 ESwvP9hCUQWFrUh1K9r900+xS6tzhfh5YRM5q26jH4CrNg7w/kF2CHEsP4tTtIPU
 K9gwAmsqw/TfuJ2WjT+24E/yPZSzJZyu/Ak5+FZOtkr5KT0mHVR5ZzMHATvBWVsW
 X8jzv+zSuZFUVLF7cmnxiP16g/zGoRMtI7njErWUe5UC2vGcbv/taxx9iQ==
 =1uQg
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Highlights:

   - Fix brightness key events getting reported twice on some Dells.
     Regression caused by recent Panasonic hotkey fixes

   - Fix poweroff no longer working on some devices regression caused
     by recent poweroff handler rework

   - Mark new (in 5.19) Intel IFS driver as broken, because of some
     issues surrounding the userspace (sysfs) API which need to be
     cleared up

   - Some hardware-id / quirk additions"

* tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  ACPI: video: Fix acpi_video_handles_brightness_key_presses()
  platform/x86: intel_atomisp2_led: Also turn off the always-on camera LED on the Asus T100TAF
  platform/x86/intel/ifs: Mark as BROKEN
  platform/x86: asus-wmi: Add key mappings
  efi: Fix efi_power_off() not being run before acpi_power_off() when necessary
  platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
  platform/x86: gigabyte-wmi: add support for B660I AORUS PRO DDR4
  platform/x86/amd/pmc: Add new platform support
  platform/x86/amd/pmc: Add new acpi id for PMC controller
2022-07-15 10:12:22 -07:00
Linus Torvalds
339f74e38f xen: branch for v5.19-rc7
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYtEBMAAKCRCAXGG7T9hj
 vlHbAP9dOgfLzMOWoYzU1BZUzDQ88arQqsTKxGbHv7kSRVxa0gD/dltV8zJ6dYu0
 tY4/33QCN5OjNAXR3zh2BEnHYiRUXAw=
 =en7u
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.19a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fix from Juergen Gross:
 "Fix for the Xen gntdev driver causing inappropriate WARN() messages"

* tag 'for-linus-5.19a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: Ignore failure to unmap INVALID_GRANT_HANDLE
2022-07-15 10:00:49 -07:00
Linus Torvalds
fcd1b2b9c7 drm fixes for 5.19-rc7
amdgpu:
 - revert buddy allocator support for now
 - DP MST blank screen fix for specific platforms
 - MEC firmware check fix for GC 10.3.7
 - Deep color fix for DCE
 - Fix possible divide by 0
 - Coverage blend mode fix
 - Fix cursor only commit timestamps
 
 i915:
 - Selftest fix
 - TTM fix sg_table construction
 - Error return fixes
 - Fix a performance regression related to waitboost
 - Fix GT resets
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmLQ39YACgkQDHTzWXnE
 hr5xIA/9HzAOKTur/1scEk94yRDcrehyX1j7bqreU7i9TbsveWGN7ONw6mHnv3/w
 KjHp42vPwgaeaOks211q95mM92BGCDvq4BZtlbxYIWg9bD4aATw3r5VN62LUhO0h
 bsbtmzk8kruvaELCdGrZxcQ35UOe/XoiVck95L0InUjpv0b9LcQjZ+dEyJ06BcxE
 R0lxyq9h4pFica8GkykHA/pVn2HdS3Ypt+tV6cq2btn/K2eBmCzPlWHrwqztBRdL
 uEUpHK0b/e6roZSvM/s8vEHLNmJkK9MRYRTtHakfQOkpD6VpC1kH/lma5S8g8eQc
 YE7SPN0lN9O9zJzDBZm9yGnxZmtK7xhBvUiVmKEA6PA+mMYN0WEZZrXyUHAjKthA
 X/dqNVnCFmaAKXvve/K3NHoRwKlCSGAlgFpv+hAel3HhTQEw/43s2M1lDg4tlTjd
 MHE2gZNHjTgL+mHEepj4BdXMYw2QjBCpT0FZKeM/B+K076szLB10Lp1qpYzcF7Br
 riChdhhNnkcpTu+40XocBkk9T63kv8Vm0PkD1rNOYaRVrFGZ6vnOVVRrv2OzNL9y
 BUWNUxDezSNodQ0r0Z/u8/7I7I24tEa0hlNHlEtP32NT5gWNjLBnZL6TeL0utejf
 TJThGFbtzJue8ov0Q/Bz545jAQuojqxqm0njTfcxSmrZEGf6SzY=
 =hh9N
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "This is the regular fixes pull for this week. This has a bunch of
  amdgpu fixes, major one reverts the buddy allocator until it can be
  tested more, otherwise just small ones, then i915 has a bunch of
  fixes.

  The outstanding firmware regressions reported by phoronix will
  hopefully be dealt with ASAP.

  amdgpu:
   - revert buddy allocator support for now
   - DP MST blank screen fix for specific platforms
   - MEC firmware check fix for GC 10.3.7
   - Deep color fix for DCE
   - Fix possible divide by 0
   - Coverage blend mode fix
   - Fix cursor only commit timestamps

  i915:
   - Selftest fix
   - TTM fix sg_table construction
   - Error return fixes
   - Fix a performance regression related to waitboost
   - Fix GT resets"

* tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Ensure valid event timestamp for cursor-only commits
  drm/amd/display: correct check of coverage blend mode
  drm/amd/pm: Prevent divide by zero
  drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.
  drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7
  drm/amd/display: Ignore First MST Sideband Message Return Error
  drm/i915/selftests: fix subtraction overflow bug
  drm/i915/gem: Look for waitboosting across the whole object prior to individual waits
  drm/i915/gt: Serialize TLB invalidates with GT resets
  drm/i915/gt: Serialize GRDOM access between multiple engine resets
  drm/i915/ttm: fix sg_table construction
  drm/i915/selftests: fix a couple IS_ERR() vs NULL tests
  drm/i915: Fix vm use-after-free in vma destruction
  drm/i915/guc: ADL-N should use the same GuC FW as ADL-S
  drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
  drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist()
  Revert "drm/amdgpu: add drm buddy support to amdgpu"
2022-07-15 09:56:24 -07:00
Ben Dooks
a2a5580fcb bpf: Fix check against plain integer v 'NULL'
When checking with sparse, btf_show_type_value() is causing a
warning about checking integer vs NULL when the macro is passed
a pointer, due to the 'value != 0' check. Stop sparse complaining
about any type-casting by adding a cast to the typeof(value).

This fixes the following sparse warnings:

kernel/bpf/btf.c:2579:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:2581:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:3407:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:3758:9: warning: Using plain integer as NULL pointer

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220714100322.260467-1-ben.dooks@sifive.com
2022-07-15 09:55:20 -07:00