Wait to mark the TSS as busy during LTR emulation until after all fault
checks for the LTR have passed. Specifically, don't mark the TSS busy if
the new TSS base is non-canonical.
Opportunistically drop the one-off !seg_desc.PRESENT check for TR as the
only reason for the early check was to avoid marking a !PRESENT TSS as
busy, i.e. the common !PRESENT is now done before setting the busy bit.
Fixes: e37a75a13c ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220711232750.1092012-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a "UD" clause to KVM_X86_QUIRK_MWAIT_NEVER_FAULTS to make it clear
that the quirk only controls the #UD behavior of MONITOR/MWAIT. KVM
doesn't currently enforce fault checks when MONITOR/MWAIT are supported,
but that could change in the future. SVM also has a virtualization hole
in that it checks all faults before intercepts, and so "never faults" is
already a lie when running on SVM.
Fixes: bfbcc81bb8 ("KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220711225753.1073989-4-seanjc@google.com
Do not use GCC's "A" constraint to load EAX:EDX in wrmsr_safe(). Per
GCC's documenation on x86-specific constraints, "A" will not actually
load a 64-bit value into EAX:EDX on x86-64.
The a and d registers. This class is used for instructions that return
double word results in the ax:dx register pair. Single word values will
be allocated either in ax or dx. For example on i386 the following
implements rdtsc:
unsigned long long rdtsc (void)
{
unsigned long long tick;
__asm__ __volatile__("rdtsc":"=A"(tick));
return tick;
}
This is not correct on x86-64 as it would allocate tick in either ax or
dx. You have to use the following variant instead:
unsigned long long rdtsc (void)
{
unsigned int tickl, tickh;
__asm__ __volatile__("rdtsc":"=a"(tickl),"=d"(tickh));
return ((unsigned long long)tickh << 32)|tickl;
}
Because a u64 fits in a single 64-bit register, using "A" for selftests,
which are 64-bit only, results in GCC loading the value into either RAX
or RDX instead of splitting it across EAX:EDX.
E.g.:
kvm_exit: reason MSR_WRITE rip 0x402919 info 0 0
kvm_msr: msr_write 40000118 = 0x60000000001 (#GP)
...
With "A":
48 8b 43 08 mov 0x8(%rbx),%rax
49 b9 ba da ca ba 0a movabs $0xabacadaba,%r9
00 00 00
4c 8d 15 07 00 00 00 lea 0x7(%rip),%r10 # 402f44 <guest_msr+0x34>
4c 8d 1d 06 00 00 00 lea 0x6(%rip),%r11 # 402f4a <guest_msr+0x3a>
0f 30 wrmsr
With "a"/"d":
48 8b 53 08 mov 0x8(%rbx),%rdx
89 d0 mov %edx,%eax
48 c1 ea 20 shr $0x20,%rdx
49 b9 ba da ca ba 0a movabs $0xabacadaba,%r9
00 00 00
4c 8d 15 07 00 00 00 lea 0x7(%rip),%r10 # 402fc3 <guest_msr+0xb3>
4c 8d 1d 06 00 00 00 lea 0x6(%rip),%r11 # 402fc9 <guest_msr+0xb9>
0f 30 wrmsr
Fixes: 3b23054cd3 ("KVM: selftests: Add x86-64 support for exception fixup")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html#Machine-Constraints
[sean: use "& -1u", provide GCC blurb and link to documentation]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220714011115.3135828-1-seanjc@google.com
Mount can now fail to older Samba servers due to a server
bug handling padding at the end of the last negotiate
context (negotiate contexts typically are rounded up to 8
bytes by adding padding if needed). This server bug can
be avoided by switching the order of negotiate contexts,
placing a negotiate context at the end that does not
require padding (prior to the recent netname context fix
this was the case on the client).
Fixes: 73130a7b1a ("smb3: fix empty netname context on secondary channels")
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol+github@gmail.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Several headers were included twice. Fix that.
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize DMUB for DCN 3.1.4.
Use same funcs as DCN31.
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display mode library for DCN 3.1.4
v2: squash in checkpatch fix (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for DCN 3.1.4
v2:(squash)fix non-x86 in dc/dcn314/Makefile
Properly handle PPC as well. (Alex)
v3: minor cleanup (Alex)
v4: fix comment (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IRQ services to support DCN 3.1.4 interrupts.
v2: make to_dal_irq_source_dcn314 static (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register headers for the following IPs:
- DCN 3.1.4
- DPCS 3.1.4
v2:(squash) clean up (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Requires enabling the vblank machinery for them.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2030
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.
For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.
v2: Allow the kernel to override the domain, which can happen when
exporting a BO to a V4L camera (for example).
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Displaying the mode as part of the seectx takes up unnecessary memory,
makes it so we can't use refcounted secctx so we need to alloc/free on
every conversion from secid to secctx and introduces a space that
could be potentially mishandled by tooling.
Eg. In an audit record we get
subj_type=firefix (enforce)
Having the mode reported is not necessary, and might even be confusing
eg. when writing an audit rule to match the above record field you
would use
-F subj_type=firefox
ie. the mode is not included. AppArmor provides ways to find the mode
without reporting as part of the secctx. So disable this by default
before its use is wide spread and we can't. For now we add a sysctl
to control the behavior as we can't guarantee no one is using this.
Acked-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
XArrays are a better match than IDR for how AppArmor is mapping
secids. Specifically AppArmor is trying to keep the allocation
dense. XArrays also have the advantage of avoiding the complexity IDRs
preallocation.
In addition this avoids/fixes a lockdep issue raised in the LKML thread
"Linux 5.18-rc4"
where there is a report of an interaction between apparmor and IPC,
this warning may have been spurious as the reported issue is in a
per-cpu local lock taken by the IDR. With the one side in the IPC id
allocation and the other in AppArmor's secid allocation.
Description by John Johansen <john.johansen@canonical.com>
Message-Id: <226cee6a-6ca1-b603-db08-8500cd8f77b7@gnuweeb.org>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Separate kernel objects from unconfined. This is done so we can
distinguish between the two in debugging, auditing and in preparation
for being able to replace unconfined, which is not appropriate for the
kernel.
The kernel label will continue to behave similar to unconfined.
Acked-by: Jon Tourville <jon.tourville@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
LRO requires striding RQ and checks that it's enabled at two places:
mlx5e_fix_features and set_feature_lro. This commit keeps only one check
at mlx5e_fix_features and removes the duplicating one in
set_feature_lro.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
LRO is mutually exclusive with XSK. When LRO is enabled, it checks
whether XSK is active. This commit moves this check to a more correct
place at mlx5e_fix_features.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Recent net commit 4d1e07d83c ("net/mlx5e: Fix matchall police parameters
validation") removed notexceed action id validation from
mlx5e_police_validate() and left it up to callers. However, since
tc_act_can_offload_police() only exists in net-next its validation is
extended in this dedicated followup patch.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After police action is parsed, set meter data in flow action,
so they can be used when adding FTE.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Comparison of eth_ft->ft with NULL is useless, because
get_flow_table() returns either pointer 'eth_ft'
such that eth_ft->ft != NULL, or an erroneous value that is
handled on return, causing mlx5e_ethtool_flow_replace()
to terminate before checking whether eth_ft->ft equals NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Implement support for new 802.1ad VLAN protocol type. Create new flow
groups that handle svlan tags. Create FDB flows with svlan tag match when
bridge VLAN is set to QinQ.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Current implementation only supports 802.1Q VLAN Ethernet protocol. That
protocol type is assumed by default and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored. To prepare
for supporting 802.1ad protocol in following patches implement the
necessary infrastructure to allow the user to dynamically change the VLAN
protocol:
- Handle SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing
FDB and re-creating VLAN modify header actions with new protocol. In this
patch the only allowed dynamic VLAN protocol value is ETH_P_8021Q.
- Save current VLAN protocol in per-bridge instance variable. Use the
dynamic variable instead of hardcoded values in mlx5 bridge code. Create
VLAN flow groups and flows based on current mlx5_esw_bridge->vlan_proto
value instead of assuming 802.1Q ethertype.
- Extract common flow group creation code into dedicated functions in order
to be reused for creating QinQ groups in following patches.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Following patches in series need to re-create VLAN actions when user
changes VLAN protocol. Extract the code that creates VLAN push/pop actions
into dedicated function in order to be reused in next patch.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Following patches in series introduce new qinq filtering group. To improve
readability rename the existing group in function, variable and definition
names to include "vlan" in order to make it easy to distinguish from
upcoming qinq group.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Following patches in the series introduce additional flow groups for QinQ
support. With increased number of groups it becomes cumbersome to calculate
groups sizes as fractions of the table size. Instead, manually define sizes
of specific group types and ensure that totals are still correct by static
assertions. Having specific table size is important for firmware resource
management.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose the number of busy / in-use slots in the FW command interface via
a read-only debugfs entry. This improves observability and helps in the
performance bottleneck analysis.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose on vport group managers debug counters for their managed vports.
Counters are exposed through debugfs, the directory will be present only
for functions that are eswitch managers and only counters that are
supported on their specific HW/FW will be exposed.
Example:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/
pf sf_8 vf_0 vf_1
$ ls -l /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
List of all counter added:
total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.
send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.
cq_overrun - number of times CQ entered an error state due to an
overflow.
async_eq_overrun -number of time an EQ mapped to async events was
overrun.
comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.
quota_exceeded_command - number of commands issued and failed due to quota
exceeded.
invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use software VHCA id when it's supported by the firmware.
A unique id is allocated upon mlx5_mdev_init() and freed upon
mlx5_mdev_uninit(), as such it stays the same during the full life cycle
of the device including upon health recovery if occurred.
The conjunction of sw_vhca_id with sw_owner_id will be a global unique
id per function which uses mlx5_core.
The sw_vhca_id is set upon init_hca command and is used to specify the
VHCA that the NIC vport is affiliated with.
This functionality is needed upon migration of VM which is MPV based.
(i.e. multi port device).
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce ifc related stuff to enable using software vhca id
functionality.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
nf_nat_initialized() doesn't modify passed struct nf_conn,
so declare as const.
This is helpful for code readability and makes it possible
to call nf_nat_initialized() with a const struct nf_conn *.
Signed-off-by: James Yonan <james@openvpn.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nfs_idmap_instantiate() will cause the process that is waiting in
request_key_with_auxdata() to wake up and exit. If there is a second
process waiting for the idmap->idmap_mutex, then it may wake up and
start a new call to request_key_with_auxdata(). If the call to
idmap_pipe_downcall() from the first process has not yet finished
calling nfs_idmap_complete_pipe_upcall_locked(), then we may end up
triggering the WARN_ON_ONCE() in nfs_idmap_prepare_pipe_upcall().
The fix is to ensure that we clear idmap->idmap_upcall_data before
calling nfs_idmap_instantiate().
Fixes: e9ab41b620 ("NFSv4: Clean up the legacy idmapper upcall")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This patch does two things:
1. For matching against the arg type, the match should be against the
base type of the arg type, since the arg type can have different
bpf_type_flags set on it.
2. Uses switch casing to improve readability + efficiency.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220712210603.123791-1-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Create separate device node for thermal sensors on apq8064 platform.
Move related properties to the newly created device tree node.
This harmonizes apq8064 and ipq8064 device trees and allows gcc device
to be probed earlier by removing dependency on QFPROM nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-5-dmitry.baryshkov@linaro.org
The Qualcomm SC8280XP need the global clock controller, interconnect
provider and TLMM pinctrl in order to boot. Enable these as builtin, as
they are needed in order to provide e.g. UART.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707161014.3178798-1-bjorn.andersson@linaro.org
The timer node needs ranges specified to map the 1-cell children to the
2-cell address range used in /soc. This addition never made it into the
patch that was posted and merged, so add it now.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707160858.3178771-1-bjorn.andersson@linaro.org
This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.
The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.
It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.
SDX55 has it's debug UART interrupt level corrected.
Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.
-----BEGIN PGP SIGNATURE-----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=nI02
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gckS
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.20
This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.
The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.
It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.
SDX55 has it's debug UART interrupt level corrected.
Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.
* tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
ARM: dts: qcom: msm8974: rename GPU's OPP table node
ARM: dts: qcom: apq8064: disable DSI and DSI PHY by default
ARM: dts: qcom: apq8064: rename DSI PHY iface clock
ARM: dts: qcom: extend scm compatible to match dt-schema
ARM: dts: qcom: Fix sdhci node names - use 'mmc@'
ARM: dts: qcom: apq8064: drop phy-names from HDMI device node
ARM: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
ARM: dts: qcom: pm8841: add required thermal-sensor-cells
ARM: dts: qcom: msm8974: add required ranges to OCMEM
ARM: dts: qcom: sdx55: add dedicated IMEM and syscon compatibles
ARM: dts: qcom: msm8974: add dedicated IMEM compatible
ARM: dts: qcom: apq8064-asus-nexus7: add dedicated IMEM compatible
ARM: dts: qcom: use generic sram as name for imem and ocmem nodes
ARM: dts: qcom: ipq8064: add function to LED nodes
ARM: dts: qcom: ipq8064-rb3011: add color to LED node
ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodes
ARM: dts: qcom: apq8060-ifc6410: add color to LED node
ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodes
ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1
...
Link: https://lore.kernel.org/r/20220713032024.1372427-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains only the enablement of USB device port.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYs5sTwAKCRCejrg/N2X7
/dysAQCzEUcQ8LLXrWUEmezC6iaLIVRR/nxZFgjUFtlSXHdRTQEA6o8S5OrWApz3
zAUDnz0KYphbY0+XPyMONh63qX5H7Qo=
=2l52
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Z8D1
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #2
It contains only the enablement of USB device port.
* tag 'at91-dt-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: kswitch-d10: enable the USB device port
Link: https://lore.kernel.org/r/20220713070602.1652118-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update the mx25_read_cpu_rev() function to support silicon revision 1.2
for i.MX25 SoC.
- A minor indentation fix in Kconfig file.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmLJJoMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6iCAgAgVxW0FQEpi1PJf9yc+mMD5nXdWcY
2xgnaptWeZE0cPF5cFvAATALQl2BGQ36D74m4TcF3MJyOv5BFhKP1WQt2dQRCbiF
ey+ZkD4Rquy9fFztzPjZglAWkAlPpzW1nTYZWwIiirYel+2iZ/LILb8crd0ntq3/
6n8hf7sdAzgtarpluJ6fykTUR2U3OmC6XLFjBLXcksKggmLA96PKtgMI6iqlgW9F
bpVWx8Do7C9vGN5tH/16upM53BrWlmbK/ZXehFz6TeiU6DkSUvgkgzub+GcMtWGs
lJJCwSmFez6YMQUYVdpeXe3hTg4nNQAZNSORIBzWGEJQ2pbqv4wzTYQewg==
=qBof
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5az/
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC update for 5.20:
- Update the mx25_read_cpu_rev() function to support silicon revision 1.2
for i.MX25 SoC.
- A minor indentation fix in Kconfig file.
* tag 'imx-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx25: support silicon revision 1.2
ARM: imx: Kconfig: Fix indentation
Link: https://lore.kernel.org/r/20220709082951.15123-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
5.20, please pull the following:
- William and Anand updates the MAINTAINERS files with new BCA SoCs
entries for a variety of PON/DSL SoCs: 63178, 63158, 4912, 6858, 6878,
6846, 6855, 6756, 63146, 6856, 63148, 6813. 63138 is now listed as a
supported BCA platform and joins the families just added.
-----BEGIN PGP SIGNATURE-----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=aGRG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pTIN
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/maintainers' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-SoC MAINTAINERS file updates for
5.20, please pull the following:
- William and Anand updates the MAINTAINERS files with new BCA SoCs
entries for a variety of PON/DSL SoCs: 63178, 63158, 4912, 6858, 6878,
6846, 6855, 6756, 63146, 6856, 63148, 6813. 63138 is now listed as a
supported BCA platform and joins the families just added.
* tag 'arm-soc/for-5.20/maintainers' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Move BCM63138 to bcmbca arch entry
MAINTAINERS: Add BCM6813 to bcmbca arch entry
MAINTAINERS: Add BCM63148 to bcmbca arch entry
MAINTAINERS: Add BCM6856 to bcmbca arch entry
MAINTAINERS: Add BCM63146 to bcmbca arch entry
MAINTAINERS: Add BCM6756 to bcmbca arch entry
MAINTAINERS: Add BCM6855 to bcmbca arch entry
MAINTAINERS: Add BCM6846 to bcmbca arch entry
MAINTAINERS: Add BCM6878 to bcmbca arch entry
MAINTAINERS: Add BCM6858 to bcmbca arch entry
MAINTAINERS: Add BCM4912 to bcmbca arch entry
MAINTAINERS: Add BCM63158 to bcmbca arch entry
MAINTAINERS: Add BCM63178 to bcmbca arch entry
Link: https://lore.kernel.org/r/20220711164451.3542127-7-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Last English version used:
commit d2b40ba2cc ("docs: *-regressions.rst: explain how quickly
issues should be handled")
Signed-off-by: Wu XiangCheng <bobwxc@email.cn>
Reviewed-by: Yanteng Si<siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/YsbuDGIpUjOzfAAh@bobwxc.mipc
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
pull the following:
- Miaoqian fixes a device_node reference count leak in the Kona SMC
initialization code
- William moves the 63138 support code to use CONFIG_ARCH_BCMBCA which
is how all of those similar SoCs from the BCA division are supported
moving forward. This includes machine code and UART low-level debug
code.
-----BEGIN PGP SIGNATURE-----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=VsJl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6GeZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/soc' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom SoC drivers changes for 5.20, please
pull the following:
- Miaoqian fixes a device_node reference count leak in the Kona SMC
initialization code
- William moves the 63138 support code to use CONFIG_ARCH_BCMBCA which
is how all of those similar SoCs from the BCA division are supported
moving forward. This includes machine code and UART low-level debug
code.
* tag 'arm-soc/for-5.20/soc' of https://github.com/Broadcom/stblinux:
ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
arm: bcmbca: Add BCMBCA sub platforms
arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA
ARM: bcm: Fix refcount leak in bcm_kona_smc_init
Link: https://lore.kernel.org/r/20220711164451.3542127-8-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add an initial documentation topic for Linux enlightenments to
run as a guest on Microsoft's Hyper-V hypervisor, linked under
the "virt" documentation area. Update the virt doc index.rst
and the MAINTAINERS file.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1657561704-12631-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
I noticed that there are some Chinese words that can be more accurate.
So I fix them as follows.
首先,英文原文中的"release" 在这个语境下
是物理页面“释放”的意思,而不是“发布”。
其次,标准表的第一列和第二列,
表达的是“长短键”的意思,第一列是“短键”,
而第二列是“长键”。这样翻译或会更清晰一些。
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Acked-by: Yanteng Si<siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20220708172351.20928-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>