pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmLMTLoACgkQh9CWnEQH
BwREZQ//VBLjwNRlG5ABfcGRBLIrfQdtyr3zgu0yI836Yp7lCyjNGnx0BBSwtYpN
cXnuS9gB4Snh5NaqVRIc/7IYEs96FP9yZhklZM1LucT9JtieXb1aYSkVGA6i1JIw
2jaE/4Ygi/4D1taI6Mae/9qlfMXlVjVmsTl18nDQu8Pa7o0HBImDCAeluTp/x0HS
08buMR1Zhb2Mnj+1SS/nks2t5rx6DWe2Q/05+nmBrDFIUSmGOcBoxcVsKlpAP8fz
Z3RkiuJr7A3XRfymbICypGpmDIFcZKzCPMvbmgAtEUzCzBGxQzb7RvVt7nW9dztU
ZCZKdyDMP2bsWtc+dQqjIVY1tFwSIvM4oqac4FyZZIM+P5l3UiVUEXB9eI8pHhzd
aWoHjtTENCkpcN16JV2mByi4cZd3xyYZiXZXjAmdX+6yN0VgoI3elz5oDospQFBc
OtZHgZKDsSB5KwJVsEo9npEZmBdD2nWEHGyaNWiTvxe2DMM5uuOLp3ErbmzAFEQ0
y4GNg33cL2rLBYOk3XhFiJTMCVCnkKsW9AbyWsrhhYZOAOtYKraaJgY3fiHdocU4
jvajFEHobu6yBoKEFzEZQ/rqy3JEomFPw6uzXdbFx6w580X7fuIvowx9f//0cgv5
BpvcGS/wROitzsFHSP6a+d/Dvvl4siiRNtZeFOjyJVFH0jnUFaQ=
=NP7q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EGHr
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM SoCs defconfig changes for 5.20, please
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
* tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Update configs for BCM63138
ARM: configs: Enable DRM_V3D
Link: https://lore.kernel.org/r/20220711164451.3542127-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7180 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-3-git-send-email-quic_sibis@quicinc.com
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7280 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-2-git-send-email-quic_sibis@quicinc.com
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
-----BEGIN PGP SIGNATURE-----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=AHeW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0Kp7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.20
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
* tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
soc: qcom: llcc: Fix syntax errors in comments
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
firmware: qcom_scm: Add bw voting support to the SCM interface
dt-bindings: firmware: qcom-scm: Add interconnects property
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
dt-bindings: firmware: scm: Add compatible for SDX65
dt-bindings: arm: qcom: switch maintainer to Bjorn
soc: qcom: rpmhpd: fix typos in comment
soc: qcom: correct kerneldoc
soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
firmware: qcom_scm-legacy: correct kerneldoc
dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
soc: qcom: apr: Drop redundant check in .remove()
firmware: qcom_scm: drop unexpected word "the"
soc: qcom: socinfo: Add an ID for sc7180P
Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
-----BEGIN PGP SIGNATURE-----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=O/9g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yTZT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom SoC drivers updatse for 5.20, please
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
* tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux:
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
soc: bcm: bcm2835-power: Bypass power_on/off() calls
soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
soc: bcm: bcm2835-power: Resolve ASB register macros
soc: bcm: bcm2835-power: Refactor ASB control
mfd: bcm2835-pm: Add support for BCM2711
mfd: bcm2835-pm: Use 'reg-names' to get resources
soc: bcm: brcmstb: biuctrl: Add missing of_node_put()
soc: bcm: brcmstb: pm: pm-arm: fix typo in comment
Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmLJJY8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM54iAgAjX40h6w2DOOyVZhM6VGBHmQIzfok
MiVRjPVLsEf55brvG6IwY4KnWWCOb9bcET7JxBhYsreUsLAC8255B//mLoiLZM4x
XfCFIaQ9XxnCyfzrJuXr1K0TuwlxVYAbVghcxYFpgCSpM9GwChhQstu1dgfQE3o3
p8OXlVol3bu0NN5JkbKd2t7e9P2EoCBIb9N2JIjnlxs81W63hoKEhRkhPd2CKBIN
gKEHrMf3CFFuLpSvwKKsNzwBj2y6LML413k9l7Wp5L/MEX0+Y0G/fuQ3i2fbzoDQ
OF2SQfngaeSRy8kbp1iZ+GCqfGGoBjwinZ7v2tYElH0pheR074mxIjKntQ==
=vt6q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FQvj
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.20:
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
* tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()
soc: fsl: guts: fix return value check in fsl_guts_init()
soc: imx: imx8m-blk-ctrl: Make error prints useful
soc: fsl: guts: add serial_number support
soc: fsl: guts: drop platform driver
soc: fsl: guts: use of_root instead of own reference
soc: fsl: guts: allocate soc_dev_attr on the heap
soc: fsl: guts: embed fsl_guts_get_svr() in probe()
soc: fsl: guts: remove module_exit() and fsl_guts_remove()
soc: fsl: guts: machine variable might be unset
soc: imx: gpcv2: print errno for regulator errors
Link: https://lore.kernel.org/r/20220709082951.15123-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a fix that avoids unaligned accesses to IPC memory, which in
turn helps in suppressing speculative reads from out-of-bounds memory.
Another patch performs some minor cleanup around debugfs API usage.
-----BEGIN PGP SIGNATURE-----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=I1B3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c0Uc
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.20-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.20-rc1
Contains a fix that avoids unaligned accesses to IPC memory, which in
turn helps in suppressing speculative reads from out-of-bounds memory.
Another patch performs some minor cleanup around debugfs API usage.
* tag 'tegra-for-5.20-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix error check return value of debugfs_create_file()
firmware: tegra: bpmp: Do only aligned access to IPC memory area
Link: https://lore.kernel.org/r/20220708185608.676474-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To expose unified memory for ctx save/resotre area feature
availablity to libhsakmt.
Proposed userspace:
https://patchwork.freedesktop.org/series/106218/
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When playing NV12 1080p MPO video, it is pipe splitting so
we see two pipes in fullscreen and four pipes in windowed
mode. Pipe split is happening because we are setting
MaximumMPCCombine = 1
[How]
Algorithm for MaximumMPCCombine has extra conditions we do
not need. Use DCN31 algorithm instead
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Black screen encountered when disabling Freesync through OSD on some
displays.
[How]
Set the should_disable flag when new top pipe has no plane state to
ensure that pipes get cleaned up.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some specific sink is not able to support PSRSU when DSC is turned on.
For this case, fall-back to use PSR1.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When unplug one sst monitor from a mst hub and plug in the same
port with another sst monitor, we don't read the corresponding
edid. That's because we detect there is already an edid stored in
aconnector->edid which is a stale one.
[How]
Clean up aconnector->edid when unplug mst connector.
Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In single display configuration, windowed MPO does not work
with ODM combine.
[How]
For ODM + MPO window on one half of ODM, only 3 pipes should
be allocated and scaling parameters adjusted to handle this case.
Otherwise, we use 4 pipes.
Move copy_surface_update_to_plane() before dc_add_plane_to_context()
so that it gets the updated rect information when setting up
the pipes.
Add dc_check_boundary_crossing_for_windowed_mpo_with_odm() to force
a full update when we cross a boundary requiring us to reconfigure
the number of pipes between 3 and 4 pipes.
Set config.enable_windowed_mpo_odm to true when we have the
debug.enable_single_display_2to1_odm_policy set to true.
Don't fail validating ODM with windowed MPO if
config.enable_windowed_mpo_odm is true.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Assert statements causing several bugs on Linux DM
[HOW]
Removing assert statement for Linux DM
(ASSERT(result == VBIOSSMC_Result_OK)). Also adding
logging statements for setting dcfclk.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216092
Fixes: c1b972a18d ("drm/amd/display: Insert pulling smu busy status before sending another request")
Reviewed-by: Gabe Teeger <Gabe.Teeger@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Needed a helper function for ALPM DPCD initialization
[HOW]
Refactoring to put ALPM initialization in a helper function
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Muhammad Ansari <muansari@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain DP 2.0 modes may fail validation if DP 2.0 is not considered for
ODM combine.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Exit SubVP if MPO is in use since SubVP + MPO together is not supported.
- Don't add SubVP at validation time if we see MPO is in use
Issues fixed in the SubVP / MPO transition:
1. Enable phantom pipes in post unlock function to prevent underflow
when an active pipe is being transitioned to be a phantom pipe (VTG
updates take place right away). Also must wait for VUPDATE of the main
pipe to complete first
2. Don't wait for MPCC idle when transitioning a phantom pipe to an
actual pipe. MPCC_STATUS is never asserted due to OTG being off for
phantom pipes
3. When transitioning an active pipe to phantom, program DET right away
(same as disabling the pipe) or the DET update will only take when
the phantom pipe is enabled which can cause DET allocation errors.
4. For K1/K2 programming of phantom pipes, use same settings as the
main pipe. Also don't program K1 / K2 = 0xF ever since the field is only
1 / 2 bits wide.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
update_io_ticks. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related
move instruction in front of cmpxchg).
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220712152741.7324-1-ubizjak@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old in
atomic_inc_below. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg).
Also, atomic_try_cmpxchg implicitly assigns old *ptr value to "old" when
cmpxchg fails, enabling further code simplifications.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220712150547.5786-1-ubizjak@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is better and enough to use KSYM_NAME_LEN for kprobes
in samples, no need to define and use the other values.
Link: https://lkml.kernel.org/r/1654651402-21552-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This symbol is not used outside of fprobe_example.c, so marks it static.
Fixes the following warning:
sparse warnings: (new ones prefixed by >>)
>> samples/fprobe/fprobe_example.c:23:15: sparse: sparse: symbol 'sample_probe'
was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220606075659.674556-1-sunliming@kylinos.cn
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.
The start of functions when -pg is used to compile the kernel is:
push {lr}
bl 8010e7c0 <__gnu_mcount_nc>
When function tracing is tuned off, it becomes:
push {lr}
add sp, sp, #4
Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.
Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.
Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.home
Reported-by: Sascha Hauer <sha@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().
This appears to have been caused by commit ff895103a8 ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91b9 ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.
The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.
Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa22b ("tracing: Show real
address for trace event arguments"), so we'll move that too.
Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid
Fixes: ff895103a8 ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa22b ("tracing: Show real address for trace event arguments")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This reverts commit 46bbe5c671.
As commit 46bbe5c671 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
> In parse_var_defs() if there is a problem allocating
> var_defs.expr, the earlier var_defs.name is freed.
> This free is duplicated by free_var_defs() which frees
> the rest of the list.
However, if there is a problem allocating N-th var_defs.expr:
+ in parse_var_defs(), the freed 'earlier var_defs.name' is
actually the N-th var_defs.name;
+ then in free_var_defs(), the names from 0th to (N-1)-th are freed;
IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
\
|
0th 1th (N-1)-th N-th V
+-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
+-------------+-------------+-----+-------------+-----------
These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.
If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
$ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
Then kmemleak reports:
unreferenced object 0xffff8fb100ef3518 (size 8):
comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
hex dump (first 8 bytes):
76 31 00 00 b1 8f ff ff v1......
backtrace:
[<0000000038fe4895>] kstrdup+0x2d/0x60
[<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
[<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
[<0000000066737a4c>] event_trigger_write+0x75/0xd0
[<000000007341e40c>] vfs_write+0xbb/0x2a0
[<0000000087fde4c2>] ksys_write+0x59/0xd0
[<00000000581e9cdf>] do_syscall_64+0x3a/0x80
[<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 46bbe5c671 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Set corresponding ready flag for mes ring when enable or disable
mes ring.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That has been done in BO release notify.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In init/Kconfig, the part dedicated to modules is quite large.
Move it into a dedicated Kconfig in kernel/module/
MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is
only used when MODULES are set, move it in with everything else to
avoid confusion.
MODULE_SIG_FORMAT is left in init/Kconfig because this configuration
item is not used in kernel/modules/ but in kernel/ and can be
selected independently from CONFIG_MODULES. It is for instance
selected from security/integrity/ima/Kconfig.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Windows 10/11 guests with Hyper-V role (WSL2) enabled are observed to
hang upon boot or shortly after when a non-default TSC frequency was
set for L1. The issue is observed on a host where TSC scaling is
supported. The problem appears to be that Windows doesn't use TSC
scaling for its guests, even when the feature is advertised, and KVM
filters SECONDARY_EXEC_TSC_SCALING out when creating L2 controls from
L1's VMCS. This leads to L2 running with the default frequency (matching
host's) while L1 is running with an altered one.
Keep SECONDARY_EXEC_TSC_SCALING in secondary exec controls for L2 when
it was set for L1. TSC_MULTIPLIER is already correctly computed and
written by prepare_vmcs02().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: d041b5ea93 ("KVM: nVMX: Enable nested TSC scaling")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220712135009.952805-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is an unexpected word 'is' in a comments that need to be dropped
file: ./drivers/thermal/intel/x86_pkg_temp_thermal.c
line: 108
* tj-max is is interesting because threshold is set relative to this
changed to:
* tj-max is interesting because threshold is set relative to this
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
We need a way to send extra parameters to DSP firmware. In order to do
this, we introduce ext_data array at the end of ipc_stream_params.
With this new addition we can send compress parameters.
This requires SOF ABI bump.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
By mistake a developer managed to create a 'corrupted' IPC4 firmware image which
loaded fine to the DSP and after boot it sent an IPC reply before we would have
received the FW_READY message.
It turned out that the image was an IPC3 firmware and the IPC reply was the IPC3
FW_READY notification message which got understood as an IPC4 reply message due
to the difference between the two IPC mechanism.
This caused a NULL pointer dereference since the reply memory will be allocated
after the FW_READY message.
To make sure this will not bite again, skip any spurious reply messages before
the FW_READY.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
There is no need to decouple a decoupled stream twice.
Keep the decoupling in hda_link_stream_assign() only as it is going to be
executed in all cases.
Drop the outdated comment from hda_link_dma_hw_params() as well since the code
has changed around it.
pcie_aspm_support_enabled() is used only by the acpi/pci_root.c driver,
which cannot be built as a module, so it does not need to be exported.
Unexport it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the shouty macros here with typechecked helper functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Replace this shouty macro with a real C function that has a more
descriptive name.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We should use of_node_put() for the reference 'node' returned by
of_parse_phandle() which will increase the refcount.
Fixes: fec9b62509 ("of: Add plumbing for restricted DMA pool")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220702014449.263772-1-windhl@126.com
We have sanity checks for byte controls and if any of the fail the locally
allocated scontrol->ipc_control_data is freed up, but not set to NULL.
On a rollback path of the error the higher level code will also try to free
the scontrol->ipc_control_data which will eventually going to lead to
memory corruption as double freeing memory is not a good thing.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712130103.31514-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation of probes only supports IPC3 and should not be
loaded for other IPC implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131022.1124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating a snapshot of the NVM the driver needs to read the entire
contents from the NVM and store it. The NVM reads are protected by a lock
that is shared between the driver and the firmware.
If the driver takes too long to read the entire NVM (which can happen on
some systems) then the firmware could reclaim the lock and cause subsequent
reads from the driver to fail.
We could fix this by increasing the timeout that we pass to the firmware,
but we could end up in the same situation again if the system is slow.
Instead have the driver break the reading of the NVM into blocks that are
small enough that we have confidence that the read will complete within the
timeout time, but large enough not to cause significant AQ overhead.
Fixes: dce730f178 ("ice: add a devlink region for dumping NVM contents")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver currently presumes that the record data in the PLDM header
of the firmware image will match the device ID of the running device.
This is true for E810 devices. It appears that for E822 devices that
this is not guaranteed to be true.
Fix this by adding a check for the generic E822 device.
Fixes: d69ea414c9 ("ice: implement device flash update via devlink")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYs11GgAKCRDh3BK/laaZ
PAD3APsHu08aHid5O/zPnD/90BNqAo3ruvu2WhI5wa8Dacd5SwEAgoSlH2Tx3iy9
4zWK4zZX98qAGyI+ij5aejc0TvONqAE=
=4KjV
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fix from Miklos Szeredi:
"Add a temporary fix for posix acls on idmapped mounts introduced in
this cycle. A proper fix will be added in the next cycle"
* tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: turn off SB_POSIXACL with idmapped layers temporarily