These are required by certain network profiling applications in order to
measure delays.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220629181335.3800821-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_parse_phandle() will increase the refcount of 'pcs_node', so add
of_node_put() before return from a5psw_pcs_get().
Fixes: 888cdb892b ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220630014153.1888811-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While enabling QCS404 interconnect driver, I found that other drivers
are missing too, so add all the interconnect driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-2-vkoul@kernel.org
These phys are used for USB controller found in QCS404 board, so enable
them in the defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-1-vkoul@kernel.org
msm8916 has (at least) 6 "General Purpose" clocks that can be muxed to
SoC pins. These clocks are:
GP_CLK{0, 1} : GPIO_{31, 32} (Belongs to CAMSS according to Linux)
GP_CLK_{1-3}{A, B} : GPIO_{49-51, 97, 12, 13} (Belongs to GCC itself)
GP_MN : GPIO_110 (Doesn't seem to be described in gcc,
ignored in this patch)
Those clocks may be used as e.g. PWM sources for external peripherals.
Add more frequencies to the table for those clocks so it's possible
for arbitrary peripherals to make use of them.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-5-nikita@trvn.ru
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru
In cases when MND is not enabled (e.g. when only Half Integer Divider is
used), setting D registers makes no effect.
Fail instead of making ineffective write.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-2-nikita@trvn.ru
The HDMI driver doesn't use the phy-names to identify the PHY. Different
Qualcomm platforms have used different names for the PHY. So, we are
deprecating phy-names propertty of the HDMI device and dropping them
from existing DTs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220609122350.3157529-14-dmitry.baryshkov@linaro.org
The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the
hdmi-mux-supply property.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220609122350.3157529-5-dmitry.baryshkov@linaro.org
Add proper compatibles to the IMEM device node:
1. syscon to allow accessing memory from other devices,
2. dedicated compatible as required for syscon and simple-mfd nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-6-krzysztof.kozlowski@linaro.org
syscon compatible must be preceded with a specific compatible, to
accurately describe the device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-5-krzysztof.kozlowski@linaro.org
According to Devicetree specification, the device nodes should be
generic, reflecting the function of the device. The typical name for
memory regions is "sram".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607171848.535128-3-krzysztof.kozlowski@linaro.org
As part of a recent cleanup commit, the pinctrl for a few uart and i2c
nodes was removed. Adjust the names and/or add it back and assign it to
the uart and i2c nodes.
Fixes: 1dfe967ec7 ("ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606160421.1641778-1-luca@z3ntu.xyz
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 05589b30b2 ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606064252.42595-1-linmq006@gmail.com
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2022-06-30
This series contains updates to misc Intel drivers.
Jesse removes unused macros from e100, e1000, e1000e, i40e, iavf, igc,
ixgb, ixgbe, and ixgbevf drivers.
Jiang Jian removes repeated words from ixgbe, fm10k, igb, and ixgbe
drivers.
Jilin Yuan removes repeated words from e1000, e1000e, fm10k, i40e, iavf,
igb, igbvf, igc, ixgbevf, and ice drivers.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
intel/ice:fix repeated words in comments
intel/ixgbevf:fix repeated words in comments
intel/igc:fix repeated words in comments
intel/igbvf:fix repeated words in comments
intel/igb:fix repeated words in comments
intel/iavf:fix repeated words in comments
intel/i40e:fix repeated words in comments
intel/fm10k:fix repeated words in comments
intel/e1000e:fix repeated words in comments
intel/e1000:fix repeated words in comments
ixgbe: drop unexpected word 'for' in comments
igb: remove unexpected word "the"
fm10k: remove unexpected word "the"
ixgbe: remove unexpected word "the"
intel: remove unused macros
====================
Link: https://lore.kernel.org/r/20220630213208.3034968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function to the bitmap test suite, which will ensure that
compilers are able to evaluate operations performed by the
bitops/bitmap helpers to compile-time constants when all of the
arguments are compile-time constants as well, or trigger a build
bug otherwise. This should work on all architectures and all the
optimization levels supported by Kbuild.
The function doesn't perform any runtime tests and gets optimized
out to nothing after passing the build assertions.
Unfortunately, Clang for s390 is currently broken (up to the latest
Git snapshots) -- see the comment in the code -- so for now there's
a small workaround for it which doesn't alter the logics. Hope we'll
be able to remove it one day (bugreport is on its way).
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Intel kernel bot triggered the build bug on ARC architecture that
in fact is as follows:
DECLARE_BITMAP(bitmap, BITS_PER_LONG);
bitmap_clear(bitmap, 0, BITS_PER_LONG);
BUILD_BUG_ON(!__builtin_constant_p(*bitmap));
which can be expanded to:
unsigned long bitmap[1];
memset(bitmap, 0, sizeof(*bitmap));
BUILD_BUG_ON(!__builtin_constant_p(*bitmap));
In most cases, a compiler is able to expand small/simple mem*()
calls to simple assignments or bitops, in this case that would mean:
unsigned long bitmap[1] = { 0 };
BUILD_BUG_ON(!__builtin_constant_p(*bitmap));
and on most architectures this works, but not on ARC, despite having
-O3 for every build.
So, to make this work, in case when the last bit to modify is still
within the first long (small_const_nbits()), just use plain
assignments for the rest of bitmap_*() functions which still use
mem*(), but didn't receive such compile-time optimizations yet.
This doesn't have the same coverage as compilers provide, but at
least something to start:
text: add/remove: 3/7 grow/shrink: 43/78 up/down: 1848/-3370 (-1546)
data: add/remove: 1/11 grow/shrink: 0/8 up/down: 4/-356 (-352)
notably cpumask_*() family when NR_CPUS <= BITS_PER_LONG:
netif_get_num_default_rss_queues 38 4 -34
cpumask_copy 90 - -90
cpumask_clear 146 - -146
and the abovementioned assertion started passing.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Kbuild spotted the following bug during the testing of one of
the optimizations:
In file included from include/linux/cpumask.h:12,
[...]
from drivers/net/ethernet/intel/ice/ice_switch.c:4:
drivers/net/ethernet/intel/ice/ice_switch.c: In function 'ice_find_free_recp_res_idx.constprop':
include/linux/bitmap.h:447:22: warning: 'possible_idx[0]' is used uninitialized [-Wuninitialized]
447 | *map |= GENMASK(start + nbits - 1, start);
| ^~
In file included from drivers/net/ethernet/intel/ice/ice.h:7,
from drivers/net/ethernet/intel/ice/ice_lib.h:7,
from drivers/net/ethernet/intel/ice/ice_switch.c:4:
drivers/net/ethernet/intel/ice/ice_switch.c:4929:24: note: 'possible_idx[0]' was declared here
4929 | DECLARE_BITMAP(possible_idx, ICE_MAX_FV_WORDS);
| ^~~~~~~~~~~~
include/linux/types.h:11:23: note: in definition of macro 'DECLARE_BITMAP'
11 | unsigned long name[BITS_TO_LONGS(bits)]
| ^~~~
%ICE_MAX_FV_WORDS is 48, so bitmap_set() here was initializing only
48 bits, leaving a junk in the rest 16.
It was previously hidden due to that filling 48 bits makes
bitmap_set() call external __bitmap_set(), but after making it use
plain bit arithmetics on small bitmaps, compilers started seeing
the issue. It was still working because those 16 weren't used
anywhere anyhow.
bitmap_{clear,set}() are not really intended to initialize bitmaps,
rather to modify already initialized ones, as they don't do anything
past the passed number of bits. The correct function to do this in
that particular case is bitmap_fill(), so use it here. It will do
`*possible_idx = ~0UL` instead of `*possible_idx |= GENMASK(47, 0)`,
not leaving anything in an undefined state.
Fixes: fd2a6b71e3 ("ice: create advanced switch recipe")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Currently, many architecture-specific non-atomic bitop
implementations use inline asm or other hacks which are faster or
more robust when working with "real" variables (i.e. fields from
the structures etc.), but the compilers have no clue how to optimize
them out when called on compile-time constants. That said, the
following code:
DECLARE_BITMAP(foo, BITS_PER_LONG) = { }; // -> unsigned long foo[1];
unsigned long bar = BIT(BAR_BIT);
unsigned long baz = 0;
__set_bit(FOO_BIT, foo);
baz |= BIT(BAZ_BIT);
BUILD_BUG_ON(!__builtin_constant_p(test_bit(FOO_BIT, foo));
BUILD_BUG_ON(!__builtin_constant_p(bar & BAR_BIT));
BUILD_BUG_ON(!__builtin_constant_p(baz & BAZ_BIT));
triggers the first assertion on x86_64, which means that the
compiler is unable to evaluate it to a compile-time initializer
when the architecture-specific bitop is used even if it's obvious.
In order to let the compiler optimize out such cases, expand the
bitop() macro to use the "constant" C non-atomic bitop
implementations when all of the arguments passed are compile-time
constants, which means that the result will be a compile-time
constant as well, so that it produces more efficient and simple
code in 100% cases, comparing to the architecture-specific
counterparts.
The savings are architecture, compiler and compiler flags dependent,
for example, on x86_64 -O2:
GCC 12: add/remove: 78/29 grow/shrink: 332/525 up/down: 31325/-61560 (-30235)
LLVM 13: add/remove: 79/76 grow/shrink: 184/537 up/down: 55076/-141892 (-86816)
LLVM 14: add/remove: 10/3 grow/shrink: 93/138 up/down: 3705/-6992 (-3287)
and ARM64 (courtesy of Mark):
GCC 11: add/remove: 92/29 grow/shrink: 933/2766 up/down: 39340/-82580 (-43240)
LLVM 14: add/remove: 21/11 grow/shrink: 620/651 up/down: 12060/-15824 (-3764)
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
In preparation for altering the non-atomic bitops with a macro, wrap
them in a transparent definition. This requires prepending one more
'_' to their names in order to be able to do that seamlessly. It is
a simple change, given that all the non-prefixed definitions are now
in asm-generic.
sparc32 already has several triple-underscored functions, so I had
to rename them ('___' -> 'sp32_').
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Define const_*() variants of the non-atomic bitops to be used when
the input arguments are compile-time constants, so that the compiler
will be always able to resolve those to compile-time constants as
well. Those are mostly direct aliases for generic_*() with one
exception for const_test_bit(): the original one is declared
atomic-safe and thus doesn't discard the `volatile` qualifier, so
in order to let optimize code, define it separately disregarding
the qualifier.
Add them to the compile-time type checks as well just in case.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Currently, there is a mess with the prototypes of the non-atomic
bitops across the different architectures:
ret bool, int, unsigned long
nr int, long, unsigned int, unsigned long
addr volatile unsigned long *, volatile void *
Thankfully, it doesn't provoke any bugs, but can sometimes make
the compiler angry when it's not handy at all.
Adjust all the prototypes to the following standard:
ret bool retval can be only 0 or 1
nr unsigned long native; signed makes no sense
addr volatile unsigned long * bitmaps are arrays of ulongs
Next, some architectures don't define 'arch_' versions as they don't
support instrumentation, others do. To make sure there is always the
same set of callables present and to ease any potential future
changes, make them all follow the rule:
* architecture-specific files define only 'arch_' versions;
* non-prefixed versions can be defined only in asm-generic files;
and place the non-prefixed definitions into a new file in
asm-generic to be included by non-instrumented architectures.
Finally, add some static assertions in order to prevent people from
making a mess in this room again.
I also used the %__always_inline attribute consistently, so that
they always get resolved to the actual operations.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Move generic non-atomic bitops from the asm-generic header which
gets included only when there are no architecture-specific
alternatives, to a separate independent file to make them always
available.
Almost no actual code changes, only one comment added to
generic_test_bit() saying that it's an atomic operation itself
and thus `volatile` must always stay there with no cast-aways.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # comment
Suggested-by: Marco Elver <elver@google.com> # reference to kernel-doc
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
test_bit(), as any other bitmap op, takes `unsigned long *` as a
second argument (pointer to the actual bitmap), as any bitmap
itself is an array of unsigned longs. However, the ia64_get_irr()
code passes a ref to `u64` as a second argument.
This works with the ia64 bitops implementation due to that they
have `void *` as the second argument and then cast it later on.
This works with the bitmap API itself due to that `unsigned long`
has the same size on ia64 as `u64` (`unsigned long long`), but
from the compiler PoV those two are different.
Define @irr as `unsigned long` to fix that. That implies no
functional changes. Has been hidden for 16 years!
Fixes: a58786917c ("[IA64] avoid broken SAL_CACHE_FLUSH implementations")
Cc: stable@vger.kernel.org # 2.6.16+
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220602042430.1114-1-linmq006@gmail.com
The majority of the Kconfig files use a single tab for basic indentation
and a single tab followed by two whitespaces for help text indentation.
Fix the lines that don't follow this convention.
While at it, add trailing comments to endif/endmenu statements for
better readability.
* 'riscv-kconfig_cleanups' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
riscv: Kconfig: Fix indentation and add comments
fbdev:
- sysfb fixes/conflicting fb fixes.
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so that
userspace sees the value *after* it is incremented if waiting for vblank
events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash in
probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check in
dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in submit
ioctl
vc4:
- NULL ptr dereference fix
-----BEGIN PGP SIGNATURE-----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=HDWj
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
UAPI Changes:
* fourcc: Update documentation
Cross-subsystem Changes:
* iosys-map: Rework iosys_map_{rd,wr} for improved performance
* vfio: Use aperture helpers
Core Changes:
* aperture: Export for use with other subsystems
* connector: Remove deprecated ida_simple_get()
* crtc: Add helper with general state checks, convert drivers
* format-helper: Add Kunit tests for RGB32 to RGB8
Driver Changes:
* ast: Fix black screen on resume
* bridge: tc358767: Simplify DSI lane handling
* mcde: Fix ref-count leak
* mxsfb/lcdif: Support i.MX8MP LCD controller
* stm/ltdc: Support dynamic Z order; Support mirroring; Fixes and cleanups
* vc4: Many small fixes throughout the driver
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmK9TnYACgkQaA3BHVML
eiMJcgf+JsGWlFutkxlJCEUDKTXk6BYHQL4czyskDvpBoLrdU1tyrAfKKtqP5k+0
SMvS6h1CFa/fSUCYpbdpJ6ER1fZ9r19WdgoPTBc4b97/uQTOJDzd5zuHDiJZquwC
O6HD/rptUzPFe6HJuY2cYVtwMlWb2NhITMHfctgyeQJSMK8TwoU1bDVFftwxaWFt
ISscTz0enn38sCjEarSpyKkBCinuaWDcpe5BI2Dp3imkDWR3ktzuh4B11QWS0DKs
Q/FLGTEl1sDrV7r93WiA5BIAPVwNMm1Pl0syd1p42SNLNnv0gcap4GL6qni4h9Ev
P/3fIInor/Sht8fyhlFsOUA8k2x7MA==
=6NoJ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-06-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.20:
UAPI Changes:
* fourcc: Update documentation
Cross-subsystem Changes:
* iosys-map: Rework iosys_map_{rd,wr} for improved performance
* vfio: Use aperture helpers
Core Changes:
* aperture: Export for use with other subsystems
* connector: Remove deprecated ida_simple_get()
* crtc: Add helper with general state checks, convert drivers
* format-helper: Add Kunit tests for RGB32 to RGB8
Driver Changes:
* ast: Fix black screen on resume
* bridge: tc358767: Simplify DSI lane handling
* mcde: Fix ref-count leak
* mxsfb/lcdif: Support i.MX8MP LCD controller
* stm/ltdc: Support dynamic Z order; Support mirroring; Fixes and cleanups
* vc4: Many small fixes throughout the driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmK9TnYACgkQaA3BHVML
# eiMJcgf+JsGWlFutkxlJCEUDKTXk6BYHQL4czyskDvpBoLrdU1tyrAfKKtqP5k+0
# SMvS6h1CFa/fSUCYpbdpJ6ER1fZ9r19WdgoPTBc4b97/uQTOJDzd5zuHDiJZquwC
# O6HD/rptUzPFe6HJuY2cYVtwMlWb2NhITMHfctgyeQJSMK8TwoU1bDVFftwxaWFt
# ISscTz0enn38sCjEarSpyKkBCinuaWDcpe5BI2Dp3imkDWR3ktzuh4B11QWS0DKs
# Q/FLGTEl1sDrV7r93WiA5BIAPVwNMm1Pl0syd1p42SNLNnv0gcap4GL6qni4h9Ev
# P/3fIInor/Sht8fyhlFsOUA8k2x7MA==
# =6NoJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jun 2022 17:19:18 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yr1On+eT1mCvIMzW@linux-uq9g
rxe_queue.h currently includes <uapi/rdma/rdma_user_rxe.h> for a
definition of struct rxe_queue_buf. But it is only used as a pointer so
the definition is not needed.
This patch replaces the include statement with the declaration
struct rxe_queue_buf;
Link: https://lore.kernel.org/r/20220630190425.2251-5-rpearsonhpe@gmail.com
Reported-by: Frank Zago <frank.zago@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pyverbs test suite generates a few dmesg traces from intentional error
tests. This patch replaces those messages with pr_debug() calls which
improves the usefullness of the tests.
Link: https://lore.kernel.org/r/20220630190425.2251-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IRQ_TYPE_NONE is invalid, so use the correct interrupt type.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Fixes: b05f82b152 ("ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220522083618.17894-1-luca@z3ntu.xyz
When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:
ERROR: modpost: "__nedf2" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by rewriting a small part of the
dcn32_build_wm_range_table.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes when trying to enable some feature, we have to define some
values with educated guesses, but we mark those values as TBD, which
means "To Be Determined". However, the correct way to approach it is by
loading that information from the firmware. Anyway, some of the values
that we were experimenting with caused this issue:
ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by removing the division by two since it is
harmless in this case.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:
ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This was caused because we were trying to assign an unsigned int to a
double value which causes issues for 32-bit architecture. This issue can
be fixed by changing the value type.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>