Commit graph

1,188,286 commits

Author SHA1 Message Date
Rob Herring
92c2b1c12f dt-bindings: arm: Rename Coresight filenames to match compatible
Use the compatible strings for filenames as that is the preferred naming
convention for DT bindings.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220603011933.3277315-2-robh@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-06-29 09:54:57 -06:00
Darrick J. Wong
8944c6fb8a xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
On a system with a realtime volume and a 28k realtime extent,
generic/491 fails because the test opens a file on a frozen filesystem
and closing it causes xfs_release -> xfs_can_free_eofblocks to
mistakenly think that the the blocks of the realtime extent beyond EOF
are posteof blocks to be freed.  Realtime extents cannot be partially
unmapped, so this is pointless.  Worse yet, this triggers posteof
cleanup, which stalls on a transaction allocation, which is why the test
fails.

Teach the predicate to account for realtime extents properly.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-06-29 08:47:56 -07:00
Darrick J. Wong
e53bcffad0 xfs: don't hold xattr leaf buffers across transaction rolls
Now that we've established (again!) that empty xattr leaf buffers are
ok, we no longer need to bhold them to transactions when we're creating
new leaf blocks.  Get rid of the entire mechanism, which should simplify
the xattr code quite a bit.

The original justification for using bhold here was to prevent the AIL
from trying to write the empty leaf block into the fs during the brief
time that we release the buffer lock.  The reason for /that/ was to
prevent recovery from tripping over the empty ondisk block.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-06-29 08:47:56 -07:00
Darrick J. Wong
7be3bd8856 xfs: empty xattr leaf header blocks are not corruption
TLDR: Revert commit 51e6104fdb ("xfs: detect empty attr leaf blocks in
xfs_attr3_leaf_verify") because it was wrong.

Every now and then we get a corruption report from the kernel or
xfs_repair about empty leaf blocks in the extended attribute structure.
We've long thought that these shouldn't be possible, but prior to 5.18
one would shake loose in the recoveryloop fstests about once a month.

A new addition to the xattr leaf block verifier in 5.19-rc1 makes this
happen every 7 minutes on my testing cloud.  I added a ton of logging to
detect any time we set the header count on an xattr leaf block to zero.
This produced the following dmesg output on generic/388:

XFS (sda4): ino 0x21fcbaf leaf 0x129bf78 hdcount==0!
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 xfs_attr3_leaf_create+0x187/0x230
 xfs_attr_shortform_to_leaf+0xd1/0x2f0
 xfs_attr_set_iter+0x73e/0xa90
 xfs_xattri_finish_update+0x45/0x80
 xfs_attr_finish_item+0x1b/0xd0
 xfs_defer_finish_noroll+0x19c/0x770
 __xfs_trans_commit+0x153/0x3e0
 xfs_attr_set+0x36b/0x740
 xfs_xattr_set+0x89/0xd0
 __vfs_setxattr+0x67/0x80
 __vfs_setxattr_noperm+0x6e/0x120
 vfs_setxattr+0x97/0x180
 setxattr+0x88/0xa0
 path_setxattr+0xc3/0xe0
 __x64_sys_setxattr+0x27/0x30
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

So now we know that someone is creating empty xattr leaf blocks as part
of converting a sf xattr structure into a leaf xattr structure.  The
conversion routine logs any existing sf attributes in the same
transaction that creates the leaf block, so we know this is a setxattr
to a file that has no attributes at all.

Next, g/388 calls the shutdown ioctl and cycles the mount to trigger log
recovery.  I also augmented buffer item recovery to call ->verify_struct
on any attr leaf blocks and complain if it finds a failure:

XFS (sda4): Unmounting Filesystem
XFS (sda4): Mounting V5 Filesystem
XFS (sda4): Starting recovery (logdev: internal)
XFS (sda4): xattr leaf daddr 0x129bf78 hdrcount == 0!
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 xfs_attr3_leaf_verify+0x3b8/0x420
 xlog_recover_buf_commit_pass2+0x60a/0x6c0
 xlog_recover_items_pass2+0x4e/0xc0
 xlog_recover_commit_trans+0x33c/0x350
 xlog_recovery_process_trans+0xa5/0xe0
 xlog_recover_process_data+0x8d/0x140
 xlog_do_recovery_pass+0x19b/0x720
 xlog_do_log_recovery+0x62/0xc0
 xlog_do_recover+0x33/0x1d0
 xlog_recover+0xda/0x190
 xfs_log_mount+0x14c/0x360
 xfs_mountfs+0x517/0xa60
 xfs_fs_fill_super+0x6bc/0x950
 get_tree_bdev+0x175/0x280
 vfs_get_tree+0x1a/0x80
 path_mount+0x6f5/0xaa0
 __x64_sys_mount+0x103/0x140
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc61e241eae

And a moment later, the _delwri_submit of the recovered buffers trips
the same verifier and recovery fails:

XFS (sda4): Metadata corruption detected at xfs_attr3_leaf_verify+0x393/0x420 [xfs], xfs_attr3_leaf block 0x129bf78
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00  ........;.......
00000010: 00 00 00 00 01 29 bf 78 00 00 00 00 00 00 00 00  .....).x........
00000020: a5 1b d0 02 b2 9a 49 df 8e 9c fb 8d f8 31 3e 9d  ......I......1>.
00000030: 00 00 00 00 02 1f cb af 00 00 00 00 10 00 00 00  ................
00000040: 00 50 0f b0 00 00 00 00 00 00 00 00 00 00 00 00  .P..............
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
XFS (sda4): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply+0x37f/0x3b0 [xfs] (fs/xfs/xfs_buf.c:1518).  Shutting down filesystem.
XFS (sda4): Please unmount the filesystem and rectify the problem(s)
XFS (sda4): log mount/recovery failed: error -117
XFS (sda4): log mount failed

I think I see what's going on here -- setxattr is racing with something
that shuts down the filesystem:

Thread 1				Thread 2
--------				--------
xfs_attr_sf_addname
xfs_attr_shortform_to_leaf
<create empty leaf>
xfs_trans_bhold(leaf)
xattri_dela_state = XFS_DAS_LEAF_ADD
<roll transaction>
					<flush log>
					<shut down filesystem>
xfs_trans_bhold_release(leaf)
<discover fs is dead, bail>

Thread 3
--------
<cycle mount, start recovery>
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
<replay empty leaf buffer from recovered buf item>
xfs_buf_delwri_queue(leaf)
xfs_buf_delwri_submit
_xfs_buf_ioapply(leaf)
xfs_attr3_leaf_write_verify
<trip over empty leaf buffer>
<fail recovery>

As you can see, the bhold keeps the leaf buffer locked and thus prevents
the *AIL* from tripping over the ichdr.count==0 check in the write
verifier.  Unfortunately, it doesn't prevent the log from getting
flushed to disk, which sets up log recovery to fail.

So.  It's clear that the kernel has always had the ability to persist
attr leaf blocks with ichdr.count==0, which means that it's part of the
ondisk format now.

Unfortunately, this check has been added and removed multiple times
throughout history.  It first appeared in[1] kernel 3.10 as part of the
early V5 format patches.  The check was later discovered to break log
recovery and hence disabled[2] during log recovery in kernel 4.10.
Simultaneously, the check was added[3] to xfs_repair 4.9.0 to try to
weed out the empty leaf blocks.  This was still not correct because log
recovery would recover an empty attr leaf block successfully only for
regular xattr operations to trip over the empty block during of the
block during regular operation.  Therefore, the check was removed
entirely[4] in kernel 5.7 but removal of the xfs_repair check was
forgotten.  The continued complaints from xfs_repair lead to us
mistakenly re-adding[5] the verifier check for kernel 5.19.  Remove it
once again.

[1] 517c22207b ("xfs: add CRCs to attr leaf blocks")
[2] 2e1d23370e ("xfs: ignore leaf attr ichdr.count in verifier
                   during log replay")
[3] f7140161 ("xfs_repair: junk leaf attribute if count == 0")
[4] f28cef9e4d ("xfs: don't fail verifier on empty attr3 leaf
                   block")
[5] 51e6104fdb ("xfs: detect empty attr leaf blocks in
                   xfs_attr3_leaf_verify")

Looking at the rest of the xattr code, it seems that files with empty
leaf blocks behave as expected -- listxattr reports no attributes;
getxattr on any xattr returns nothing as expected; removexattr does
nothing; and setxattr can add attributes just fine.

Original-bug: 517c22207b ("xfs: add CRCs to attr leaf blocks")
Still-not-fixed-by: 2e1d23370e ("xfs: ignore leaf attr ichdr.count in verifier during log replay")
Removed-in: f28cef9e4d ("xfs: don't fail verifier on empty attr3 leaf block")
Fixes: 51e6104fdb ("xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2022-06-29 08:47:56 -07:00
Peter Zijlstra
f43b9876e8 x86/retbleed: Add fine grained Kconfig knobs
Do fine-grained Kconfig for all the various retbleed parts.

NOTE: if your compiler doesn't support return thunks this will
silently 'upgrade' your mitigation to IBPB, you might not like this.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-29 17:43:41 +02:00
Mike Leach
8add26f7ef coresight: syscfg: Update load and unload operations
The configfs system is a source of access to the config information in the
configuration and feature lists.

This can result in additional LOCKDEP issues as a result of the mutex
ordering between the config list mutex (cscfg_mutex) and the configfs
system mutexes.

As such we need to adjust how load/unload operations work to ensure correct
operation.

1) Previously the cscfg_mutex was held throughout the load/unload
operation. This is now only held during configuration list manipulations,
resulting in a multi-stage load/unload process.

2) All operations that manipulate the configfs representation of the
configurations and features are now separated out and run without the
cscfg_mutex being held. This avoids circular lock_dep issue with the
built-in configfs mutexes and semaphores

3) As the load and unload is now multi-stage, some parts under the
cscfg_mutex and others not:
i) A flag indicating a load / unload operation in progress is used to
serialise load / unload operations.
ii) activating any configuration not possible when unload is in progress.
iii) Configurations have an "available" flag set only after the last load
stage for the configuration is complete. Activation of the configuration
not possible till flag is set.

4) Following load/unload rules remain:
i) Unload prevented while any configuration is active remains.
ii) Unload in strict reverse order of load.
iii) Existing configurations can be activated while a new load operation
is underway. (by definition there can be no dependencies between an
existing configuration and a new loading one due to ii) above.)

Fixes: eb2ec49606 ("coresight: syscfg: Update load API for config loadable modules")
Reported-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220628173004.30002-3-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-06-29 09:35:58 -06:00
Stephan Gerhold
bc4d193238
regulator: qcom_smd: Add PM8909 RPM regulators
The set of regulators available in the PM8909 PMIC is similar to PM8916
which is already supported by the driver. s3, s4 and l16 are missing.
However, probing the SPMI hardware identification registers using the
qcom_spmi-regulator driver reveals that the regulators in PM8909 are
actually some kind of mixture between PM8916 and PM8226:

  - ult_lo_smps (= pm8916_buck_lvo_smps): s1
  - ult_ho_smps (= pm8916_buck_hvo_smps): s2
  - ult_nldo (= pm8916_nldo): l1, l2, l3, l10
  - ult_pldo (= pm8916_pldo): l4, l8, l9, l12-l15, l17, l18
  - pldo (= pm8226_pldo): l5, l6, l7, l11

Use this mapping to add the rpm_regulator_data for PM8909 by reusing
the existing regulator definitions.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20220623094614.1410180-4-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 16:32:10 +01:00
Stephan Gerhold
8cbb948a7c
regulator: dt-bindings: qcom,smd-rpm: Add PM8909
Document the "qcom,rpm-pm8909-regulators" compatible for describing
the regulators available in the PM8909 PMIC (controlled via the RPM
firmware).

PM8909 is very similar to the existing PM8916 but lacks 3 of the
regulators (s3, s4 and l16).

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220623094614.1410180-3-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 16:32:09 +01:00
Stephan Gerhold
e8977917e1
regulator: qcom_smd: Fix pm8916_pldo range
The PM8916 device specification [1] documents a programmable range of
1.75V to 3.337V with 12.5mV steps for the PMOS LDOs in PM8916. This
range is also used when controlling the regulator directly using the
qcom_spmi-regulator driver ("ult_pldo" there).

However, for some reason the qcom_smd-regulator driver allows a much
larger range for the same hardware component. This could be simply a
typo, since the start of the range is essentially just missing a '1'.

In practice this does not cause any major problems, since the driver
just sends the actual voltage to the RPM firmware instead of making use
of the incorrect voltage selector. Still, having the wrong range there
is confusing and prevents the regulator core from validating requests
correctly.

[1]: https://developer.qualcomm.com/download/sd410/pm8916pm8916-1-power-management-ic-device-specification.pdf

Fixes: 57d6567680 ("regulator: qcom-smd: Add PM8916 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20220623094614.1410180-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 16:32:08 +01:00
ChiYuan Huang
46ae6fb58f
regulator: mt6370: Use the correct header for platform_device_id
'platform_device_id' struct is defined in 'mod_devicetable.h'.
Even 'of.h' also includes this header usage. The 'of.h' cannot be removed
due to 'of_match_ptr' function.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1656466861-7737-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 16:31:42 +01:00
ChiYuan Huang
4806c991bf
regulator: mt6370: Use 'fwnode_gpiod_get_index' to fix gpio parsing
From the common binding, 'enable-gpio' or 'enable-gpios' are all well
for external 'enable' gpio.

'gpiod_get_from_of_node' only parse the 'enable' property, it need to
add the gpio suffix. It's more convenient to use fwnode_gpiod_get_index.
Although fwnode parsing is not preferred, but 'of_parse_cb' already can
guarantee the callback will only be used by regulator of_node parsing.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1656466861-7737-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29 16:31:41 +01:00
Mike Leach
199380decc coresight: configfs: Fix unload of configurations on module exit
Any loaded configurations must be correctly unloaded on coresight module
exit, or issues can arise with nested locking in the configfs directory
code if built with CONFIG_LOCKDEP.

Prior to this patch, the preloaded configuration configfs directory entries
were being unloaded by the recursive code in
configfs_unregister_subsystem().

However, when built with CONFIG_LOCKDEP, this caused a nested lock warning,
which was not mitigated by the LOCKDEP dependent code in fs/configfs/dir.c
designed to prevent this, due to the different directory levels for the
root of the directory being removed.

As the preloaded (and all other) configurations are registered after
configfs_register_subsystem(), we now explicitly unload them before the
call to configfs_unregister_subsystem().

The new routine cscfg_unload_cfgs_on_exit() iterates through the load
owner list to unload any remaining configurations that were not unloaded
by the user before the module exits. This covers both the
CSCFG_OWNER_PRELOAD and CSCFG_OWNER_MODULE owner types, and will be
extended to cover future load owner types for CoreSight configurations.

Fixes: eb2ec49606 ("coresight: syscfg: Update load API for config loadable modules")
Reported-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220628173004.30002-2-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-06-29 09:31:08 -06:00
Andreas Gruenbacher
6feaec8147 gfs2: List traversal in do_promote is safe
In do_promote(), we're never removing the current entry from the list
and so the list traversal is actually safe.  Switch back to
list_for_each_entry().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 17:01:59 +02:00
Bob Peterson
0befb8511e gfs2: do_promote glock holder stealing fix
In do_promote(), when the glock had no strong holders, we were
accidentally calling demote_incompat_holders() with new_gh == NULL, so
no weak holders were considered incompatible.  Instead, the new holder
should have been passed in.

For doing that, the HIF_HOLDER flag needs to be set in new_gh to prevent
may_grant() from complaining.  This means that the new holder will now
be recognized as a current holder, so skip over it explicitly in
demote_incompat_holders() to prevent it from being dequeued.

To further clarify things, we can now rename new_gh to current_gh in
demote_incompat_holders(); after all, the HIF_HOLDER flag is already set,
which means the new holder is already a current holder.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 17:00:55 +02:00
Andreas Gruenbacher
8f0028fc60 gfs2: Use better variable name
In do_promote() and add_to_queue(), use current_gh as the variable name
for the first strong holder we could find: this matches the variable
name is may_grant(), and more clearly indicates that we're interested in
one (any) of the current strong holders.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 17:00:21 +02:00
Andreas Gruenbacher
5f38a4d3c4 gfs2: Make go_instantiate take a glock
Make go_instantiate take a glock instead of a glock holder as its argument:
this handler is supposed to instantiate the object associated with the glock.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 16:59:07 +02:00
Andreas Gruenbacher
86c30a01f5 gfs2: Add new go_held glock operation
Right now, inode_go_instantiate() contains functionality that relates to
how a glock is held rather than the glock itself, like waiting for
pending direct I/O to complete and completing interrupted truncates.
This code is meant to be run each time a holder is acquired, but
go_instantiate is actually only called once, when the glock is
instantiated.

To fix that, introduce a new go_held glock operation that is called each
time a glock holder is acquired.  Move the holder specific code in
inode_go_instantiate() over to inode_go_held().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 16:56:41 +02:00
Andreas Gruenbacher
de3f906f0a gfs2: Revert 'Fix "truncate in progress" hang'
Now that interrupted truncates are completed in the context of the
process taking the glock, there is no need for the glock state engine to
delegate that task to gfs2_quotad or for quotad to perform those
truncates anymore.  Get rid of the obsolete associated infrastructure.

Reverts commit 813e0c46c9 ("GFS2: Fix "truncate in progress" hang").

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2022-06-29 16:54:59 +02:00
Andreas Gruenbacher
53d6913295 gfs2: Instantiate glocks ouside of glock state engine
Instantiate glocks outside of the glock state engine: there is no real
reason for instantiating them inside the glock state engine; it only
complicates the code.

Instead, instantiate them in gfs2_glock_wait() and gfs2_glock_async_wait()
using the new gfs2_glock_holder_ready() helper.  On top of that, the only
other place that acquires a glock without using gfs2_glock_wait() or
gfs2_glock_async_wait() is gfs2_upgrade_iopen_glock(), so call
gfs2_glock_holder_ready() there as well.

If a dinode has a pending truncate, the glock-specific instantiate function
for inodes wakes up the truncate function in the quota daemon.  Waiting for
the completion of the truncate was previously done by the glock state
engine, but we now need to wait in inode_go_instantiate().

This also means that gfs2_instantiate() will now no longer return any
"special" error codes.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 16:53:22 +02:00
Andreas Gruenbacher
bdff777cbb gfs2: Fix up gfs2_glock_async_wait
Since commit 1fc05c8d84 ("gfs2: cancel timed-out glock requests"), a
pending locking request can be canceled by calling gfs2_glock_dq() on
the pending holder.  In gfs2_glock_async_wait(), when we time out, use
that to cancel the remaining locking requests and dequeue the locking
requests already granted.  That's simpler as well as more efficient than
waiting for all locking requests to eventually be granted and dequeuing
them then.

In addition, gfs2_glock_async_wait() promises that by the time the
function completes, all glocks are either granted or dequeued, but the
implementation doesn't keep that promise if individual locking requests
fail.  Fix that as well.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-06-29 16:47:44 +02:00
Mark Brown
0dbc49476a
spi support for Exynos Auto v9 SoC
Merge series from Chanho Park <chanho61.park@samsung.com>:

Add to support Exynos Auto v9 SoC's spi. By supporting USI(Universal
Serial Interface) mode, the SoC can support up to 12 spi ports. Thus, we
need to increase MAX_SPI_PORTS from 6 to 12. The spi of the SoC can
support loopback mode unlike previous exynos SoCs. To separate the
feature, we need to add .has_loopback to the s3c64xx_spi_port_config.
Furthermore, it uses 4 as the default internal clock divider. We also
need to clk_div field of the structure and assign "2" as the default
value to the existing SoC's port config.
Device tree definitions of exynosautov9-spi will be added in separated
patchset to include usi(i2c/uart/spi) nodes all together.
2022-06-29 15:43:11 +01:00
Mark Brown
7ed186642e
ASoC: codecs: add WSA883x support
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

This patchset adds support for WSA883x smart speaker amplifier codec
connected via SoundWire. This codec also has a temperature sensor used
for speaker protection, support for this is not added yet.

Most of the code is derived from Qualcomm downstream msm-5.10 kernel.
Thanks to Patrick Lai's Team.

This codec is tested on SM8450 MTP.
2022-06-29 15:43:09 +01:00
Christoph Hellwig
22d0c4080f block: simplify disk_set_independent_access_ranges
Lift setting disk->ia_ranges from disk_register_independent_access_ranges
into disk_set_independent_access_ranges, and make the behavior the same
for the registered vs non-registered queue cases.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220629062013.1331068-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-29 08:36:46 -06:00
Christoph Hellwig
6a27d28c81 block: move ->ia_ranges from the request_queue to the gendisk
Independent access ranges only matter for file system I/O and are only
valid with a registered gendisk, so move them there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220629062013.1331068-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-29 08:36:46 -06:00
Ying Sun
b9a1c179bd block: remove "select BLK_RQ_IO_DATA_LEN" from BLK_CGROUP_IOCOST dependency
The configuration item BLK_RQ_IO_DATA_LEN is not declared in the kernel.
Select BLK_RQ_IO_DATA_LEN is meaningless which could be removed.

Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629062409.19458-1-sunying@nj.iscas.ac.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-29 08:35:57 -06:00
Christian Brauner
77940f0d96
mnt_idmapping: align kernel doc and parameter order
The kernel documentation added for the new helpers had a few tiny
ordering issues. Fix them.

Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-29 16:34:41 +02:00
Ruozhu Li
f7f70f4aa0 nvme: fix regression when disconnect a recovering ctrl
We encountered a problem that the disconnect command hangs.
After analyzing the log and stack, we found that the triggering
process is as follows:
CPU0                          CPU1
                                nvme_rdma_error_recovery_work
                                  nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl                 nvme_stop_queues
  nvme_remove_namespaces
  --clear ctrl->namespaces
                                    nvme_start_queues
                                    --no ns in ctrl->namespaces
    nvme_ns_remove                  return(because ctrl is deleting)
      blk_freeze_queue
        blk_mq_freeze_queue_wait
        --wait for ns to unquiesce to clean infligt IO, hang forever

This problem was not found in older kernels because we will flush
err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not
seem to be modified for functional reasons, the patch can be revert
to solve the problem.

Revert commit 794a4cb3d2 ("nvme: remove the .stop_ctrl callout")

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29 16:13:45 +02:00
Pablo Greco
1629de0e03 nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
ADATA XPG SPECTRIX S40G drives report bogus eui64 values that appear to
be the same across drives in one system. Quirk them out so they are
not marked as "non globally unique" duplicates.

Before:
[    2.258919] nvme nvme1: pci function 0000:06:00.0
[    2.264898] nvme nvme2: pci function 0000:05:00.0
[    2.323235] nvme nvme1: failed to set APST feature (2)
[    2.326153] nvme nvme2: failed to set APST feature (2)
[    2.333935] nvme nvme1: allocated 64 MiB host memory buffer.
[    2.336492] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.339611] nvme nvme1: 7/0/0 default/read/poll queues
[    2.341805] nvme nvme2: 7/0/0 default/read/poll queues
[    2.346114]  nvme1n1: p1
[    2.347197] nvme nvme2: globally duplicate IDs for nsid 1
After:
[    2.427715] nvme nvme1: pci function 0000:06:00.0
[    2.427771] nvme nvme2: pci function 0000:05:00.0
[    2.488154] nvme nvme2: failed to set APST feature (2)
[    2.489895] nvme nvme1: failed to set APST feature (2)
[    2.498773] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.500587] nvme nvme1: allocated 64 MiB host memory buffer.
[    2.504113] nvme nvme2: 7/0/0 default/read/poll queues
[    2.507026] nvme nvme1: 7/0/0 default/read/poll queues
[    2.509467] nvme nvme2: Ignoring bogus Namespace Identifiers
[    2.512804] nvme nvme1: Ignoring bogus Namespace Identifiers
[    2.513698]  nvme1n1: p1

Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29 16:13:45 +02:00
Sagi Grimberg
41d07df7de nvme-tcp: always fail a request when sending it failed
queue stoppage and inflight requests cancellation is fully fenced from
io_work and thus failing a request from this context. Hence we don't
need to try to guess from the socket retcode if this failure is because
the queue is about to be torn down or not.

We are perfectly safe to just fail it, the request will not be cancelled
later on.

This solves possible very long shutdown delays when the users issues a
'nvme disconnect-all'

Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29 16:13:45 +02:00
Sagi Grimberg
ed0691cf55 nvmet-tcp: fix regression in data_digest calculation
Data digest calculation iterates over command mapped iovec. However
since commit bac04454ef we unmap the iovec before we handle the data
digest, and since commit 69b85e1f1d we clear nr_mapped when we unmap
the iov.

Instead of open-coding the command iov traversal, simply call
crypto_ahash_digest with the command sg that is already allocated (we
already do that for the send path). Rename nvmet_tcp_send_ddgst to
nvmet_tcp_calc_ddgst and call it from send and recv paths.

Fixes: 69b85e1f1d ("nvmet-tcp: add an helper to free the cmd buffers")
Fixes: bac04454ef ("nvmet-tcp: fix kmap leak when data digest in use")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29 16:13:44 +02:00
Clément Léger
5b6d7c3c58 ARM: dts: r9a06g032-rzn1d400-db: Add switch description
Add the description for the switch, GMAC2 and MII converter.  With these
definitions, the switch ports 0 and 1 (MII ports 5 and 4) are working on
the RZ/N1D-DB board.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220624144001.95518-16-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-29 16:08:10 +02:00
Clément Léger
45ed13d9b4 dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter
This MII converter can be found on the RZ/N1 processor family. The MII
converter ports are declared as subnodes which are then referenced by
users of the PCS driver such as the switch.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220624144001.95518-5-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-29 16:08:06 +02:00
Serge Semin
a57f68ddc8 reset: Fix devm bulk optional exclusive control getter
Most likely due to copy-paste mistake the device managed version of the
denoted reset control getter has been implemented with invalid semantic,
which can be immediately spotted by having "WARN_ON(shared && acquired)"
warning in the system log as soon as the method is called. Anyway let's
fix it by altering the boolean arguments passed to the
__devm_reset_control_bulk_get() method from
- shared = true, optional = false, acquired = true
to
+ shared = false, optional = true, acquired = true
That's what they were supposed to be in the first place (see the non-devm
version of the same method: reset_control_bulk_get_optional_exclusive()).

Fixes: 48d7139589 ("reset: Add reset_control_bulk API")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220624141853.7417-2-Sergey.Semin@baikalelectronics.ru
2022-06-29 15:56:20 +02:00
Lukas Bulwahn
a5bdaae7ae MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
Commit 820f722c05 ("dt-bindings: reset: snps,axs10x-reset: Convert to
yaml") converts snps,axs10x-reset.txt to yaml, but misses to adjust its
reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in SYNOPSYS AXS10x RESET CONTROLLER DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220601082239.12009-1-lukas.bulwahn@gmail.com
2022-06-29 15:53:40 +02:00
Geert Uytterhoeven
2f805cba10 pinctrl: renesas: r8a779f0: Remove unused POC2
The POWER Condition Control Register 2 (POC2) is unused, and the
documentation does not define any valid bits.  Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d8a9ea39b49d24e39f4da3f00b64bce34016887d.1655301529.git.geert+renesas@glider.be
2022-06-29 15:53:04 +02:00
Clément Léger
b6b9585876 reset: microchip-sparx5: allow building as a module
Set RESET_MCHP_SPARX5 as a tristate and add MODULE_DEVICE_TABLE() to
allow building this driver as a module.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220617103730.490588-1-clement.leger@bootlin.com
2022-06-29 15:41:43 +02:00
Clément Léger
cda41c14ab ARM: dts: r9a06g032: Describe switch
Add the description of the switch that is present on the RZ/N1 SoC. This
description includes ethernet-port descriptions for all the ports that
are present on the switch along with their connection to the MII
converter ports and to the GMAC for the CPU port.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220624144001.95518-15-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-29 15:29:13 +02:00
Clément Léger
c6f6009236 ARM: dts: r9a06g032: Describe GMAC2
The RZ/N1 SoC includes two MACs named GMACx that are compatible with the
"snps,dwmac" driver.  GMAC1 is connected directly to the MII converter
port 1.  GMAC2 however can be used as the MAC for the switch CPU
management port or can be muxed to be connected directly to the MII
converter port 2.  This commit adds the description for the GMAC2 which
will be used by the switch description.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220624144001.95518-14-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-29 15:28:39 +02:00
Clément Léger
dc0f673114 ARM: dts: r9a06g032: Describe MII converter
Add the MII converter node which describes the MII converter that is
present on the RZ/N1 SoC.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220624144001.95518-13-clement.leger@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-29 15:28:27 +02:00
Geert Uytterhoeven
a71a62dd5e dt-bindings: pinctrl: renesas: Remove spaces before #define
Remove spaces at the beginning of lines with #defines.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/5188ef93a911ce3781b16530fdebbf0f0af462b6.1655301264.git.geert+renesas@glider.be
2022-06-29 15:21:58 +02:00
Chris Paterson
d1273f541a arm64: dts: renesas: r9a07g054l2-smarc: Correct SoC name in comment
This dts is for the RZ/V2L SMARC EVK, not RZ/G2L.

Fixes: f91c4c7479 ("arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Link: https://lore.kernel.org/r/20220623103024.24222-1-chris.paterson2@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-29 15:18:22 +02:00
Geert Uytterhoeven
8267839530 ARM: dts: renesas: Fix DA9063 watchdog subnode names
make dtbs_check:

    arch/arm/boot/dts/r8a7791-koelsch-single-memory-node.dtb: pmic@58: 'wdt' does not match any of the regexes: 'pinctrl-[0-9]+'
	    From schema: Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
    ...

Change the watchdog child node names to match the DA9063 DT bindings and
the Generic Names Recommendation in the Devicetree Specification.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1dafdce285f7d14bec9e2033ac87fb30135895db.1655818230.git.geert+renesas@glider.be
2022-06-29 15:17:46 +02:00
Geert Uytterhoeven
f48cb21a28 arm64: dts: renesas: r8a779m8: Drop operating points above 1.5 GHz
The highest-performance mode for the Cortex-A57 CPU cores supported on
R-Car H3Ne (R8A779M8) is the Power Optimized (1.5 GHz) mode.  The Normal
(1.6 GHz) and High Performance (1.7 GHz) modes are not supported.

Hence drop the "turbo-mode" entries from the operating points table
inherited from r8a77951.dtsi.

Fixes: 6e87525d75 ("arm64: dts: renesas: Add Renesas R8A779M8 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/aeb4530f7fbac8329b334dcb169382c836a5f32d.1655458564.git.geert+renesas@glider.be
2022-06-29 15:16:06 +02:00
Geert Uytterhoeven
0553b288ab MAINTAINERS: Add Renesas SoC DT bindings to Renesas Architecture sections
While Renesas SoC DT bindings documents started to appear under
Documentation/devicetree/bindings/soc/renesas, these are not yet covered
by the file and directory patterns in the Renesas ARM/ARM64 Architecture
sections.

Add the missing patterns.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f99c03a95a103517418f0b23d3da45e0dd0ffb3b.1655456310.git.geert+renesas@glider.be
2022-06-29 15:14:32 +02:00
Michael Walle
9577fc5fdc NFC: nxp-nci: don't print header length mismatch on i2c error
Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29 14:05:00 +01:00
Michael Walle
eddd95b942 NFC: nxp-nci: Don't issue a zero length i2c_master_read()
There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.

Fixes: 6be88670fc ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29 14:05:00 +01:00
Maksym Glubokiy
702e701432 net: prestera: acl: add support for 'egress' rules
The following is now supported:

  $ tc qdisc add PORT clsact
  $ tc filter add dev PORT egress ...

Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29 14:02:37 +01:00
Petr Machata
04cfbc1d89 selftests: forwarding: ethtool_extended_state: Convert to busywait
Currently, this script sets up the test scenario, which is supposed to end
in an inability of the system to negotiate a link. It then waits for a bit,
and verifies that the system can diagnose why the link was not established.

The wait time for the scenario where different link speeds are forced on
the two ends of a loopback cable, was set to 4 seconds, which exactly
covered it. As of a recent mlxsw firmware update, this time gets longer,
and this test starts failing.

The time that selftests currently wait for links to be established is
currently $WAIT_TIMEOUT, or 20 seconds. It seems reasonable that if this is
the time necessary to establish and bring up a link, it should also be
enough to determine that a link cannot be established and why.

Therefore in this patch, convert the sleeps to busywaits, so that if a
failure is established sooner (as is expected), the test runs quicker. And
use $WAIT_TIMEOUT as the time to wait.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29 14:01:23 +01:00
Walter Heymans
9bacb93bcf nfp: flower: fix comment typos and formatting
A number of spelling and language mistakes in the flower section are
fixed. The spacing between the text inside some comments and the comment
symbols are also updated for consistency.

Signed-off-by: Walter Heymans <walter.heymans@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29 13:59:21 +01:00
Matthew Wilcox (Oracle)
0b768a9610 nfs: Leave pages in the pagecache if readpage failed
The pagecache handles readpage failing by itself; it doesn't want
filesystems to remove pages from under it.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-06-29 08:51:07 -04:00