Commit graph

1,188,286 commits

Author SHA1 Message Date
Fabiano Rosas
0df01238b8 KVM: PPC: Book3S HV: tracing: Add missing hcall names
The kvm_trace_symbol_hcall macro is missing several of the hypercalls
defined in hvcall.h.

Add the most common ones that are issued during guest lifetime,
including the ones that are only used by QEMU and SLOF.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220614165204.549229-1-farosas@linux.ibm.com
2022-06-29 19:21:29 +10:00
Ard Biesheuvel
fbf6ad5efe arm64: lds: use PROVIDE instead of conditional definitions
Currently, a build with CONFIG_EFI=n and CONFIG_KASAN=y will not
complete successfully because of missing symbols. This is due to the
fact that the __pi_ prefixed aliases for __memcpy/__memmove were put
inside a #ifdef CONFIG_EFI block inadvertently, and are therefore
missing from the build in question.

These definitions should only be provided when needed, as they will
otherwise clutter up the symbol table, kallsyms etc for no reason.
Fortunately, instead of using CPP conditionals, we can achieve the same
result by using the linker's PROVIDE() directive, which only defines a
symbol if it is required to complete the link. So let's use that for all
symbols alias definitions.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220629083246.3729177-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2022-06-29 10:21:23 +01:00
Fabiano Rosas
b44bb1b7cb KVM: PPC: Book3S HV: Provide more detailed timings for P9 entry path
Alter the data collection points for the debug timing code in the P9
path to be more in line with what the code does. The points where we
accumulate time are now the following:

vcpu_entry: From vcpu_run_hv entry until the start of the inner loop;

guest_entry: From the start of the inner loop until the guest entry in
             asm;

in_guest: From the guest entry in asm until the return to KVM C code;

guest_exit: From the return into KVM C code until the corresponding
            hypercall/page fault handling or re-entry into the guest;

hypercall: Time spent handling hcalls in the kernel (hcalls can go to
	   QEMU, not accounted here);

page_fault: Time spent handling page faults;

vcpu_exit: vcpu_run_hv exit (almost no code here currently).

Like before, these are exposed in debugfs in a file called
"timings". There are four values:

- number of occurrences of the accumulation point;
- total time the vcpu spent in the phase in ns;
- shortest time the vcpu spent in the phase in ns;
- longest time the vcpu spent in the phase in ns;

===
Before:

  rm_entry: 53132 16793518 256 4060
  rm_intr: 53132 2125914 22 340
  rm_exit: 53132 24108344 374 2180
  guest: 53132 40980507996 404 9997650
  cede: 0 0 0 0

After:

  vcpu_entry: 34637 7716108 178 4416
  guest_entry: 52414 49365608 324 747542
  in_guest: 52411 40828715840 258 9997480
  guest_exit: 52410 19681717182 826 102496674
  vcpu_exit: 34636 1744462 38 182
  hypercall: 45712 22878288 38 1307962
  page_fault: 992 111104034 568 168688

  With just one instruction (hcall):

  vcpu_entry: 1 942 942 942
  guest_entry: 1 4044 4044 4044
  in_guest: 1 1540 1540 1540
  guest_exit: 1 3542 3542 3542
  vcpu_exit: 1 80 80 80
  hypercall: 0 0 0 0
  page_fault: 0 0 0 0
===

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-6-farosas@linux.ibm.com
2022-06-29 19:21:22 +10:00
Fabiano Rosas
2861c82728 KVM: PPC: Book3S HV: Expose timing functions to module code
The next patch adds new timing points to the P9 entry path, some of
which are in the module code, so we need to export the timing
functions.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-5-farosas@linux.ibm.com
2022-06-29 19:21:21 +10:00
Fabiano Rosas
c3fa64c99c KVM: PPC: Book3S HV: Decouple the debug timing from the P8 entry path
We are currently doing the timing for debug purposes of the P9 entry
path using the accumulators and terminology defined by the old entry
path for P8 machines.

Not only the "real-mode" and "napping" mentions are out of place for
the P9 Radix entry path but also we cannot change them because the
timing code is coupled to the structures defined in struct
kvm_vcpu_arch.

Add a new CONFIG_KVM_BOOK3S_HV_P9_TIMING to enable the timing code for
the P9 entry path. For now, just add the new CONFIG and duplicate the
structures. A subsequent patch will add the P9 changes.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-4-farosas@linux.ibm.com
2022-06-29 19:21:21 +10:00
Fabiano Rosas
3f8ed993be KVM: PPC: Book3S HV: Add a new config for P8 debug timing
Turn the existing Kconfig KVM_BOOK3S_HV_EXIT_TIMING into
KVM_BOOK3S_HV_P8_TIMING in preparation for the addition of a new
config for P9 timings.

This applies only to P8 code, the generic timing code is still kept
under KVM_BOOK3S_HV_EXIT_TIMING.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-3-farosas@linux.ibm.com
2022-06-29 19:21:21 +10:00
Fabiano Rosas
9981bace85 KVM: PPC: Book3S HV: Fix "rm_exit" entry in debugfs timings
At debugfs/kvm/<pid>/vcpu0/timings we show how long each part of the
code takes to run:

$ cat /sys/kernel/debug/kvm/*-*/vcpu0/timings
rm_entry: 123785 49398892 118 4898
rm_intr: 123780 6075890 22 390
rm_exit: 0 0 0 0                     <-- NOK
guest: 123780 46732919988 402 9997638
cede: 0 0 0 0                        <-- OK, no cede napping in P9

The "rm_exit" is always showing zero because it is the last one and
end_timing does not increment the counter of the previous entry.

We can fix it by calling accumulate_time again instead of
end_timing. That way the counter gets incremented. The rest of the
arithmetic can be ignored because there are no timing points after
this and the accumulators are reset before the next round.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-2-farosas@linux.ibm.com
2022-06-29 19:21:21 +10:00
Javier Martinez Canillas
ee7a69aa38
fbdev: Disable sysfb device registration when removing conflicting FBs
The platform devices registered by sysfb match with firmware-based DRM or
fbdev drivers, that are used to have early graphics using a framebuffer
provided by the system firmware.

DRM or fbdev drivers later are probed and remove conflicting framebuffers,
leading to these platform devices for generic drivers to be unregistered.

But the current solution has a race, since the sysfb_init() function could
be called after a DRM or fbdev driver is probed and request to unregister
the devices for drivers with conflicting framebuffes.

To prevent this, disable any future sysfb platform device registration by
calling sysfb_disable(), if a driver requests to remove the conflicting
framebuffers.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-4-javierm@redhat.com
2022-06-29 09:51:50 +02:00
Javier Martinez Canillas
bde376e9de
firmware: sysfb: Add sysfb_disable() helper function
This can be used by subsystems to unregister a platform device registered
by sysfb and also to disable future platform device registration in sysfb.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com
2022-06-29 09:51:41 +02:00
Javier Martinez Canillas
9e121040e5
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
This function just returned 0 on success or an errno code on error, but it
could be useful for sysfb_init() callers to have a pointer to the device.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-2-javierm@redhat.com
2022-06-29 09:51:31 +02:00
Colin Ian King
ee794221a6
fpga: fpga-mgr: Fix spelling mistake "bitsream" -> "bitstream"
There is an spelling mistake in a dev_err message. Fix it.

Fixes: 3cc624beba ("fpga: fpga-mgr: support bitstream offset in image buffer")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220624081409.14760-1-colin.i.king@gmail.com
[yilun.xu@intel.com: add the Fixes tag]
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-06-29 15:18:18 +08:00
Christophe Leroy
c7b9ed7c34 powerpc/64e: KASAN Full support for BOOK3E/64
We now have memory organised in a way that allows
implementing KASAN.

Unlike book3s/64, book3e always has translation active so the only
thing needed to use KASAN is to setup an early zero shadow mapping
just after setting a stack pointer and before calling early_setup().

The memory layout is now as follows

   +------------------------+  Kernel virtual map end (0xc000200000000000)
   |                        |
   |    16TB of KASAN map   |
   |                        |
   +------------------------+  Kernel KASAN shadow map start
   |                        |
   |    16TB of IO map      |
   |                        |
   +------------------------+  Kernel IO map start
   |                        |
   |    16TB of vmemmap     |
   |                        |
   +------------------------+  Kernel vmemmap start
   |                        |
   |    16TB of vmap        |
   |                        |
   +------------------------+  Kernel virt start (0xc000100000000000)
   |                        |
   |    64TB of linear mem  |
   |                        |
   +------------------------+  Kernel linear (0xc.....)

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0bef8beda27baf71e3b9e8b13e620fba6e19499b.1656427701.git.christophe.leroy@csgroup.eu
2022-06-29 17:04:15 +10:00
Christophe Leroy
059c189389 powerpc/64e: Reorganise virtual memory
Reduce the size of IO map in order to leave the last
quarter of virtual MAP for KASAN shadow mapping.

This gives the following layout.

   +------------------------+  Kernel virtual map end (0xc000200000000000)
   |                        |
   |    16TB (unused)       |
   |                        |
   +------------------------+  Kernel IO map end
   |                        |
   |    16TB of IO map      |
   |                        |
   +------------------------+  Kernel IO map start
   |                        |
   |    16TB of vmemmap     |
   |                        |
   +------------------------+  Kernel vmemmap start
   |                        |
   |    16TB of vmap        |
   |                        |
   +------------------------+  Kernel virt start (0xc000100000000000)
   |                        |
   |    64TB of linear mem  |
   |                        |
   +------------------------+  Kernel linear (0xc.....)

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/54ef01673bf14228106afd629f795c83acb9a00c.1656427701.git.christophe.leroy@csgroup.eu
2022-06-29 17:04:15 +10:00
Christophe Leroy
128c1ea2f8 powerpc/64e: Move virtual memory closer to linear memory
Today nohash/64 have linear memory based at 0xc000000000000000 and
virtual memory based at 0x8000000000000000.

In order to implement KASAN, we need to regroup both areas.

Move virtual memmory at 0xc000100000000000.

This complicates a bit TLB miss handlers. Until now, memory region
was easily identified with the 4 higher bits of address:
- 0 ==> User
- c ==> Linear Memory
- 8 ==> Virtual Memory

Now we need to rely on the 20 higher bits, with:
- 0xxxx ==> User
- c0000 ==> Linear Memory
- c0001 ==> Virtual Memory

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b225168031449fc34fc7132f3923cc8dc54af60.1656427701.git.christophe.leroy@csgroup.eu
2022-06-29 17:04:15 +10:00
Christophe Leroy
b646c1f7f4 powerpc/64e: Remove unused REGION related macros
Those macros are not used anywhere. Remove them as they are soon
going to be wrong and are not worth modifying as they are not used.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f0efde8cee0924c3991790042b176ac77ad35e1f.1656427701.git.christophe.leroy@csgroup.eu
2022-06-29 17:04:15 +10:00
Christophe Leroy
3adfb457b8 powerpc/64e: Remove MMU_FTR_USE_TLBRSRV and MMU_FTR_USE_PAIRED_MAS
Commit fb5a515704 ("powerpc: Remove platforms/wsp and associated
pieces") removed the last CPU having features MMU_FTRS_A2 and
commit cd68098bce ("powerpc: Clean up MMU_FTRS_A2 and
MMU_FTR_TYPE_3E") removed MMU_FTRS_A2 which was the last user of
MMU_FTR_USE_TLBRSRV and MMU_FTR_USE_PAIRED_MAS.

Remove all code that relies on MMU_FTR_USE_TLBRSRV and
MMU_FTR_USE_PAIRED_MAS.

With this change done, TLB miss can happen before the mmu feature
fixups.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cfd5a0ecdb1598da968832e1bddf7431ec267200.1656427701.git.christophe.leroy@csgroup.eu
2022-06-29 17:04:14 +10:00
Christophe Leroy
0931764311 powerpc/64e: Fix early TLB miss with KUAP
With KUAP, the TLB miss handler bails out when an access to user
memory is performed with a nul TID.

But the normal TLB miss routine which is only used early during boot
does the check regardless for all memory areas, not only user memory.

By chance there is no early IO or vmalloc access, but when KASAN
come we will start having early TLB misses.

Fix it by creating a special branch for user accesses similar to the
one in the 'bolted' TLB miss handlers. Unfortunately SPRN_MAS1 is
now read too early and there are no registers available to preserve
it so it will be read a second time.

Fixes: 57bc963837 ("powerpc/kuap: Wire-up KUAP on book3e/64")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8d6c5859a45935d6e1a336da4dc20be421e8cea7.1656427701.git.christophe.leroy@csgroup.eu
2022-06-29 17:04:14 +10:00
Christophe Leroy
dd8de84b57 powerpc/ptdump: Fix display of RW pages on FSL_BOOK3E
On FSL_BOOK3E, _PAGE_RW is defined with two bits, one for user and one
for supervisor. As soon as one of the two bits is set, the page has
to be display as RW. But the way it is implemented today requires both
bits to be set in order to display it as RW.

Instead of display RW when _PAGE_RW bits are set and R otherwise,
reverse the logic and display R when _PAGE_RW bits are all 0 and
RW otherwise.

This change has no impact on other platforms as _PAGE_RW is a single
bit on all of them.

Fixes: 8eb07b1870 ("powerpc/mm: Dump linux pagetables")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c33b96317811edf691e81698aaee8fa45ec3449.1656427391.git.christophe.leroy@csgroup.eu
2022-06-29 17:03:42 +10:00
Christophe Leroy
2db2008e63 powerpc/64e: Rewrite p4d_populate() as a static inline function
Rewrite p4d_populate() as a static inline function instead of
a macro.

This change allows typechecking and would have helped detecting
a recently found bug in map_kernel_page().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1b416f8a8fe1bc3f4e01175680ce310b7eb3a1e4.1655974565.git.christophe.leroy@csgroup.eu
2022-06-29 17:03:11 +10:00
Christophe Leroy
12a9eddd23 powerpc: Remove _PAGE_SAO stub for book3e/64
Since commit 634093c59a ("powerpc/mm: enable
ARCH_HAS_VM_GET_PAGE_PROT"), _PAGE_SAO is used only in
arch/powerpc/mm/book3s64/pgtable.c

The _PAGE_SAO stub defined as 0 for book3e/64 can be removed.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/715e644fb3c7d992c0b71f6165ab6cf8c682055a.1655706069.git.christophe.leroy@csgroup.eu
2022-06-29 16:59:31 +10:00
Christophe Leroy
513f5bbac7 powerpc/32: Remove __map_without_ltlbs
__map_without_ltlbs is used only for 40x, and only when
STRICT_KERNEL_RWX, KFENCE or DEBUG_PAGEALLOC is active.

Do the verification directly in 40x version of mmu_mapin_ram()
and remove __map_without_ltlbs from core ppc32.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3422094db965d218c4c3d8580f526963a9ac897f.1655202721.git.christophe.leroy@csgroup.eu
2022-06-29 16:59:06 +10:00
Christophe Leroy
56e54b4e6c powerpc/32: Remove 'noltlbs' kernel parameter
Mapping without large TLBs has no added value on the 8xx.

Mapping without large TLBs is still necessary on 40x when
selecting CONFIG_KFENCE or CONFIG_DEBUG_PAGEALLOC or
CONFIG_STRICT_KERNEL_RWX, but this is done automatically
and doesn't require user selection.

Remove 'noltlbs' kernel parameter, the user has no reason
to use it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80ca17bd39cf608a8ebd0764d7064a498e131199.1655202721.git.christophe.leroy@csgroup.eu
2022-06-29 16:59:06 +10:00
Christophe Leroy
1ce844973b powerpc/32: Remove the 'nobats' kernel parameter
Mapping without BATs doesn't bring any added value to the user.

Remove that option.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6977314c823cfb728bc0273cea634b41807bfb64.1655202721.git.christophe.leroy@csgroup.eu
2022-06-29 16:59:06 +10:00
Christophe Leroy
92f89ec1b5 powerpc: Restore CONFIG_DEBUG_INFO in defconfigs
Commit f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a
choice") broke the selection of CONFIG_DEBUG_INFO by powerpc defconfigs.

It is now necessary to select one of the three DEBUG_INFO_DWARF*
options to get DEBUG_INFO enabled.

Replace DEBUG_INFO=y by DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y in all
defconfigs using the following command:

sed -i s/DEBUG_INFO=y/DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y/g `git grep -l DEBUG_INFO arch/powerpc/configs/`

Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/98a4c2603bf9e4b776e219f5b8541d23aa24e854.1654930308.git.christophe.leroy@csgroup.eu
2022-06-29 16:58:49 +10:00
Christophe Leroy
78f1c24abd powerpc/irq: Simplify __do_irq()
Remove duplicated code by implementing a proper if/else.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5a3b21311191f1240850db6ab29b19ac7885fe03.1654769775.git.christophe.leroy@csgroup.eu
2022-06-29 16:58:31 +10:00
Christophe Leroy
e90855be9e powerpc/irq: Perform stack_overflow detection after switching to IRQ stack
When KASAN is enabled, as shown by the Oops below, the 2k limit is not
enough to allow stack dump after a stack overflow detection when
CONFIG_DEBUG_STACKOVERFLOW is selected:

	do_IRQ: stack overflow: 1984
	CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1
	Call Trace:
	Oops: Kernel stack overflow, sig: 11 [#1]
	BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
	Modules linked in: sr_mod cdrom radeon(+) ohci_pci(+) hwmon i2c_algo_bit drm_ttm_helper ttm drm_dp_helper snd_aoa_i2sbus snd_aoa_soundbus snd_pcm ehci_pci snd_timer ohci_hcd snd ssb ehci_hcd 8250_pci soundcore drm_kms_helper pcmcia 8250 pcmcia_core syscopyarea usbcore sysfillrect 8250_base sysimgblt serial_mctrl_gpio fb_sys_fops usb_common pkcs8_key_parser fuse drm drm_panel_orientation_quirks configfs
	CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1
	NIP:  c02e5558 LR: c07eb3bc CTR: c07f46a8
	REGS: e7fe9f50 TRAP: 0000   Not tainted  (5.18.0-gentoo-PMacG4)
	MSR:  00001032 <ME,IR,DR,RI>  CR: 44a14824  XER: 20000000

	GPR00: c07eb3bc eaa1c000 c26baea0 eaa1c0a0 00000008 00000000 c07eb3bc eaa1c010
	GPR08: eaa1c0a8 04f3f3f3 f1f1f1f1 c07f4c84 44a14824 0080f7e4 00000005 00000010
	GPR16: 00000025 eaa1c154 eaa1c158 c0dbad64 00000020 fd543810 eaa1c0a0 eaa1c29e
	GPR24: c0dbad44 c0db8740 05ffffff fd543802 eaa1c150 c0c9a3c0 eaa1c0a0 c0c9a3c0
	NIP [c02e5558] kasan_check_range+0xc/0x2b4
	LR [c07eb3bc] format_decode+0x80/0x604
	Call Trace:
	[eaa1c000] [c07eb3bc] format_decode+0x80/0x604 (unreliable)
	[eaa1c070] [c07f4dac] vsnprintf+0x128/0x938
	[eaa1c110] [c07f5788] sprintf+0xa0/0xc0
	[eaa1c180] [c0154c1c] __sprint_symbol.constprop.0+0x170/0x198
	[eaa1c230] [c07ee71c] symbol_string+0xf8/0x260
	[eaa1c430] [c07f46d0] pointer+0x15c/0x710
	[eaa1c4b0] [c07f4fbc] vsnprintf+0x338/0x938
	[eaa1c550] [c00e8fa0] vprintk_store+0x2a8/0x678
	[eaa1c690] [c00e94e4] vprintk_emit+0x174/0x378
	[eaa1c6d0] [c00ea008] _printk+0x9c/0xc0
	[eaa1c750] [c000ca94] show_stack+0x21c/0x260
	[eaa1c7a0] [c07d0bd4] dump_stack_lvl+0x60/0x90
	[eaa1c7c0] [c0009234] __do_IRQ+0x170/0x174
	[eaa1c800] [c0009258] do_IRQ+0x20/0x34
	[eaa1c820] [c00045b4] HardwareInterrupt_virt+0x108/0x10c
...

As the detection is asynchronously performed at IRQs, we could be long
after the limit has been crossed, so increasing the limit would not
solve the problem completely.

In order to be sure that there is enough stack space for the stack
dump, do it after the switch to the IRQ stack. That way it is sure
that the stack is large enough, unless the IRQ stack has been
overfilled in which case the end of life is close.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c215d714329f475b431a6193369035aadfc0d182.1654769775.git.christophe.leroy@csgroup.eu
2022-06-29 16:58:31 +10:00
Christophe Leroy
051bd351a2 powerpc/irq: Make __do_irq() static
Since commit 48cf12d889 ("powerpc/irq: Inline call_do_irq() and
call_do_softirq()"), __do_irq() is not used outside irq.c

Reorder functions and make __do_irq() static and
drop the declaration in irq.h.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/adbe1c8315ec2d63259f41468e82e51677bb1eda.1654769775.git.christophe.leroy@csgroup.eu
2022-06-29 16:58:27 +10:00
Christophe Leroy
41f20d6db2 powerpc/irq: Increase stack_overflow detection limit when KASAN is enabled
When KASAN is enabled, as shown by the Oops below, the 2k limit is not
enough to allow stack dump after a stack overflow detection when
CONFIG_DEBUG_STACKOVERFLOW is selected:

	do_IRQ: stack overflow: 1984
	CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1
	Call Trace:
	Oops: Kernel stack overflow, sig: 11 [#1]
	BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
	Modules linked in: sr_mod cdrom radeon(+) ohci_pci(+) hwmon i2c_algo_bit drm_ttm_helper ttm drm_dp_helper snd_aoa_i2sbus snd_aoa_soundbus snd_pcm ehci_pci snd_timer ohci_hcd snd ssb ehci_hcd 8250_pci soundcore drm_kms_helper pcmcia 8250 pcmcia_core syscopyarea usbcore sysfillrect 8250_base sysimgblt serial_mctrl_gpio fb_sys_fops usb_common pkcs8_key_parser fuse drm drm_panel_orientation_quirks configfs
	CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1
	NIP:  c02e5558 LR: c07eb3bc CTR: c07f46a8
	REGS: e7fe9f50 TRAP: 0000   Not tainted  (5.18.0-gentoo-PMacG4)
	MSR:  00001032 <ME,IR,DR,RI>  CR: 44a14824  XER: 20000000

	GPR00: c07eb3bc eaa1c000 c26baea0 eaa1c0a0 00000008 00000000 c07eb3bc eaa1c010
	GPR08: eaa1c0a8 04f3f3f3 f1f1f1f1 c07f4c84 44a14824 0080f7e4 00000005 00000010
	GPR16: 00000025 eaa1c154 eaa1c158 c0dbad64 00000020 fd543810 eaa1c0a0 eaa1c29e
	GPR24: c0dbad44 c0db8740 05ffffff fd543802 eaa1c150 c0c9a3c0 eaa1c0a0 c0c9a3c0
	NIP [c02e5558] kasan_check_range+0xc/0x2b4
	LR [c07eb3bc] format_decode+0x80/0x604
	Call Trace:
	[eaa1c000] [c07eb3bc] format_decode+0x80/0x604 (unreliable)
	[eaa1c070] [c07f4dac] vsnprintf+0x128/0x938
	[eaa1c110] [c07f5788] sprintf+0xa0/0xc0
	[eaa1c180] [c0154c1c] __sprint_symbol.constprop.0+0x170/0x198
	[eaa1c230] [c07ee71c] symbol_string+0xf8/0x260
	[eaa1c430] [c07f46d0] pointer+0x15c/0x710
	[eaa1c4b0] [c07f4fbc] vsnprintf+0x338/0x938
	[eaa1c550] [c00e8fa0] vprintk_store+0x2a8/0x678
	[eaa1c690] [c00e94e4] vprintk_emit+0x174/0x378
	[eaa1c6d0] [c00ea008] _printk+0x9c/0xc0
	[eaa1c750] [c000ca94] show_stack+0x21c/0x260
	[eaa1c7a0] [c07d0bd4] dump_stack_lvl+0x60/0x90
	[eaa1c7c0] [c0009234] __do_IRQ+0x170/0x174
	[eaa1c800] [c0009258] do_IRQ+0x20/0x34
	[eaa1c820] [c00045b4] HardwareInterrupt_virt+0x108/0x10c
...

An investigation shows that on PPC32, calling dump_stack() requires
more than 1k when KASAN is not selected and a bit more than 2k bytes
when KASAN is selected.

On PPC64 the registers are twice the size of PPC32 registers, so the
need should be approximately twice the need on PPC32.

In the meantime we have THREAD_SIZE which is twice larger on PPC64
than PPC32, and twice larger when KASAN is selected.

So we can easily use the value of THREAD_SIZE to set the limit.

On PPC32, THREAD_SIZE is 8k without KASAN and 16k with KASAN.
On PPC64, THREAD_SIZE is 16k without KASAN.

To be on the safe side, leave 2k on PPC32 without KASAN, 4k with
KASAN, and 4k on PPC64 without KASAN. It means the limit should be
one fourth of THREAD_SIZE.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e8b4eb82a126c3c6c352173a544fe94609ff660b.1654261687.git.christophe.leroy@csgroup.eu
2022-06-29 16:57:57 +10:00
Christophe Leroy
077fc62b2b powerpc/irq: remove inline assembly in hard_irq_disable macro
Use WRITE_ONCE() instead of opencoding the saving of current
stack pointeur.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9f05937d8722ddd2064a7c2362d8f9000e15e1ba.1652863723.git.christophe.leroy@csgroup.eu
2022-06-29 16:57:25 +10:00
Christophe Leroy
78ffe6a7e2 powerpc/irq: Replace #ifdefs by IS_ENABLED()
Replace
  #ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG and
  #ifdef CONFIG_PERF_EVENTS
by IS_ENABLED() in hw_irq.h and plpar_wrappers.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c1ded642f8d9002767f8fed48ed6d1e76254ed73.1652862729.git.christophe.leroy@csgroup.eu
2022-06-29 16:57:09 +10:00
Christophe Leroy
ef5b570d37 powerpc/irq: Don't open code irq_soft_mask helpers
Use READ_ONCE() and WRITE_ONCE() instead of open coding
read and write of local PACA irq_soft_mask.

For the write, add a barrier to keep the memory clobber
that was there previously.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e2454434992cc932a5a34b695ae981c0b2f4c28e.1652862729.git.christophe.leroy@csgroup.eu
2022-06-29 16:57:09 +10:00
Christophe Leroy
98552307e3 powerpc/irq64: Remove get_irq_happened()
No need to open code the read of local_paca->irq_happened in
assembly, we have READ_ONCE() for doing the same.

Replace get_irq_happened() by READ_ONCE(local_paca->irq_happened).

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af511b53e4eb51f8fbc51eda7f5597175e68dce6.1652859593.git.christophe.leroy@csgroup.eu
2022-06-29 16:47:43 +10:00
Christophe Leroy
7d7b28b302 powerpc/irq: Split irq.c
More than half of irq.c is dedicated to PPC64.

Move PPC64 code out of irq.c into irq_64.c

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9f1a47de80f78d3dd270a7a72f69f55f581c4054.1652859593.git.christophe.leroy@csgroup.eu
2022-06-29 16:47:42 +10:00
Christophe Leroy
e93dee186f powerpc: Don't include asm/ppc_asm.h in other headers
asm/ppc_asm.h is not needed in any of the header it is included.

It is only needed by irq.c. Include it there and remove it from
other headers.

word-at-a-time.h only need ex_table.h, so include it instead.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e2d7b96547037f852c7ed164e4f79e8918c2607a.1651828453.git.christophe.leroy@csgroup.eu
2022-06-29 16:45:13 +10:00
Christophe Leroy
46d60bdb12 powerpc: Include asm/firmware.h in all users of firmware_has_feature()
Trying to remove asm/ppc_asm.h from all places that don't need it
leads to several failures linked to firmware_has_feature().

To fix it, include asm/firmware.h in all files using
firmware_has_feature()

All users found with:

	git grep -L "firmware\.h" ` git grep -l "firmware_has_feature("`

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/11956ec181a034b51a881ac9c059eea72c679a73.1651828453.git.christophe.leroy@csgroup.eu
2022-06-29 16:45:05 +10:00
Yang Li
b2274ff2c4 Input: sensehat-joystick - remove unnecessary error message
The print function dev_err() is redundant because platform_get_irq()
already prints an error.

Eliminates the follow coccicheck warning:

./drivers/input/joystick/sensehat-joystick.c:102:2-9: line 102 is redundant because platform_get_irq() already prints an error

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220427004906.129893-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 22:50:48 -07:00
Miaoqian Lin
6bb7144c3f Input: exc3000 - fix return value check of wait_for_completion_timeout
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 102feb1ddf ("Input: exc3000 - factor out vendor data request")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220411105828.22140-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 22:45:43 -07:00
Dan Williams
863fdccdc5 tools/testing/cxl: Fix cxl_hdm_decode_init() calling convention
This failing signature:

[    8.392669] cxl_bus_probe: cxl_port endpoint2: probe: 970997760
[    8.392670] cxl_port: probe of endpoint2 failed with error 970997760
[    8.392719] create_endpoint: cxl_mem mem0: add: endpoint2
[    8.392721] cxl_mem mem0: endpoint2 failed probe
[    8.392725] cxl_bus_probe: cxl_mem mem0: probe: -6

...shows cxl_hdm_decode_init() resulting in a return code ("970997760")
that looks like stack corruption. The problem goes away if
cxl_hdm_decode_init() is not mocked via __wrap_cxl_hdm_decode_init().

The corruption results from the mismatch that the calling convention for
cxl_hdm_decode_init() is:

int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)

...and __wrap_cxl_hdm_decode_init() is:

bool __wrap_cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)

...i.e. an int is expected but __wrap_hdm_decode_init() returns bool.

Fix the convention and cleanup the organization to match
__wrap_cxl_await_media_ready() as the difference was a red herring that
distracted from finding the bug.

Fixes: 92804edb11 ("cxl/pci: Drop @info argument to cxl_hdm_decode_init()")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603870776.551046.8709990108936497723.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-06-28 22:15:21 -07:00
Menglong Dong
d640516a65 net: mptcp: fix some spelling mistake in mptcp
codespell finds some spelling mistake in mptcp:

net/mptcp/subflow.c:1624: interaces ==> interfaces
net/mptcp/pm_netlink.c:1130: regarless ==> regardless

Just fix them.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220627121626.1595732-1-imagedong@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 22:11:45 -07:00
Jakub Kicinski
eba3a9816a Revert the ARM/dts changes for Renesas RZ/N1
Based on a request from Geert:

Revert "ARM: dts: r9a06g032-rzn1d400-db: add switch description"
This reverts commit 9aab31d66e.

Revert "ARM: dts: r9a06g032: describe switch"
This reverts commit cf9695d8a7.

Revert "ARM: dts: r9a06g032: describe GMAC2"
This reverts commit 3f5261f1c2.

Revert "ARM: dts: r9a06g032: describe MII converter"
This reverts commit 066c3bd358.

to let these changes flow thru the platform and SoC trees.

Link: https://lore.kernel.org/r/CAMuHMdUvSLFU56gsp1a9isOiP9otdCJ2-BqhbrffcoHuA6JNig@mail.gmail.com/
Link: https://lore.kernel.org/r/20220627173900.3136386-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 22:06:45 -07:00
Vishal Verma
e35f571890 cxl/mbox: Fix missing variable payload checks in cmd size validation
The conversion of command sizes to unsigned missed a couple of checks
against variable size payloads during command validation, which made all
variable payload commands unconditionally fail. Add the checks back using
the new CXL_VARIABLE_PAYLOAD scheme.

Fixes: 26f89535a5 ("cxl/mbox: Use type __u32 for mailbox payload sizes")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Reported-by: Abhi Cs <abhi.cs@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220628220109.633564-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-06-28 22:03:18 -07:00
Dario Binacchi
b777f93b6a Input: edt-ft5x06 - show crc and header errors by sysfs
M06 sends packets with header and crc for data verification. Now you can
check at runtime how many packets have been dropped.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220621123937.1330389-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 22:00:18 -07:00
Dario Binacchi
480343dc89 Input: edt-ft5x06 - show firmware version by sysfs
The firmware version was printed only if debug mode was enabled. Now you
can always get it from sysfs.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20220621123937.1330389-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 22:00:17 -07:00
Dario Binacchi
60790a5802 Input: edt-ft5x06 - show model name by sysfs
The model name was printed only if debug mode was enabled. Now you can
always get it from sysfs.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20220621123937.1330389-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 22:00:01 -07:00
Dario Binacchi
5bcee83a40 Input: edt-ft5x06 - set report rate by dts property
It allows to change the M06/M12 default scan rate on driver probing.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220621123937.1330389-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 22:00:00 -07:00
Dario Binacchi
23ea98f4ba Input: edt-ft5x06 - get/set M12 report rate by sysfs
Add support for reading/writing scan rate (SC) register for M12 by
sysfs. The register value is equal to the SC (Hz), unlike M06, where
instead it is equal to SC / 10.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220621123937.1330389-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 21:59:58 -07:00
Dario Binacchi
625f829586 dt-bindings: input: touchscreen: edt-ft5x06: add report-rate-hz
It allows to change the M06/M12 default scan rate.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220621123937.1330389-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28 21:59:57 -07:00
Jakub Kicinski
957b96e35b Merge branch 'net-phylink-cleanup-pcs-code'
Russell King says:

====================
net: phylink: cleanup pcs code

These two patches were part of the larger series for the mv88e6xxx
phylink pcs conversion. As this is delayed, I've decided to send these
two patches now.
====================

Link: https://lore.kernel.org/r/YrmYEC2N9mVpg9g6@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:30:12 -07:00
Russell King (Oracle)
bfac8c490d net: phylink: disable PCS polling over major configuration
While we are performing a major configuration, there is no point having
the PCS polling timer running. Stop it before we begin preparing for
the configuration change, and restart it only once we've successfully
completed the change.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:30:09 -07:00
Russell King (Oracle)
4f1dd48f40 net: phylink: remove pcs_ops member
Remove the pcs_ops member from struct phylink, using the one stored in
struct phylink_pcs instead.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 21:30:08 -07:00