Commit graph

1,188,286 commits

Author SHA1 Message Date
Peter Wang
c64c487d95 scsi: ufs: ufs-mediatek: Support performance boosting
Add pm-qos request to support performance boosting in MediaTek UFS
platforms.

At the same time, adjust the order of function calls to be symmetric during
the low-power control flow.

Link: https://lore.kernel.org/r/20220623035052.18802-8-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Po-Wen Kao
2cf5cb2bb1 scsi: ufs: ufs-mediatek: Support host power control
Add interfaces for controlling the host power to optimize the power
consumption in MediaTek UFS platforms.

Link: https://lore.kernel.org/r/20220623035052.18802-7-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Po-Wen Kao
4918694ccd scsi: ufs: ufs-mediatek: Disable reset confirm feature by UniPro
In MediaTek UFS platforms, UniPro will not return reset confirm if it is in
POWERDOWN state thus hang issue may happen while disabling UFSHCI. Simply
disable this feature before UniPro leaves POWERDOWN state.

Link: https://lore.kernel.org/r/20220623035052.18802-6-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Peter Wang
f53f191357 scsi: ufs: ufs-mediatek: Add stage information for ref-clk control
Add "PRE_CHANGE" and "POST_CHANGE" information for ref-clk control to
precisely configure the low-power state of the parent of ref-clk.

Link: https://lore.kernel.org/r/20220623035052.18802-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Peter Wang
2bae03a6ac scsi: ufs: ufs-mediatek: Prevent host hang by setting CLK_CG early
Some UFSHCI hosts in MediaTek UFS platform need workaround to prevent host
hang issue by setting CLK_CG bit before host is enabled.

This operation shall have no side effect on those platforms which do not
support this bit.

Link: https://lore.kernel.org/r/20220623035052.18802-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:36 -04:00
Peter Wang
981b4ac04c scsi: ufs: ufs-mediatek: Always add delays for VCC operations
MediaTek decides to always add delays before and after VCC is turned-off.

Link: https://lore.kernel.org/r/20220623035052.18802-3-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:35 -04:00
Stanley Chu
e7bf1d5006 scsi: ufs: ufs-mediatek: Fix build warnings
Fix build warnings:

1.
../drivers/ufs/host/ufs-mediatek.c:1375:5: error: no previous prototype for function 'ufs_mtk_system_suspend' [-Werror,-Wmissing-prototypes]
int ufs_mtk_system_suspend(struct device *dev)
    ^
../drivers/ufs/host/ufs-mediatek.c:1375:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int ufs_mtk_system_suspend(struct device *dev)
^
static

2.
../drivers/ufs/host/ufs-mediatek.c:702:50: error: format specifies type 'unsigned long' but the argument has type 'int' [-Werror,-Wformat]
                snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%lu", ver);
                                                         ~~~   ^~~
                                                         %d

Link: https://lore.kernel.org/r/20220623035052.18802-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 23:17:35 -04:00
Arnd Bergmann
b04e75a4a8 scsi: dpt_i2o: Remove obsolete driver
The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I submitted a patch to fix this reference earlier, but Hannes
Reinecke suggested that removing the driver may be just as good here.

The i2o driver layer was removed in 2015 with commit 4a72a7af46
("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver
stayed around.

The last non-cleanup patches I could find were from Miquel van Smoorenburg
and Mark Salyzyn back in 2008, they might know if there is any chance of
the hardware still being used anywhere.

Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/
Link: https://lore.kernel.org/r/20220624155226.2889613-3-arnd@kernel.org
Cc: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:56:21 -04:00
Arnd Bergmann
9f7c2232e1 scsi: BusLogic: Remove bus_to_virt()
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.

Before commit 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit."), the
driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.

This was in turn fixed in commit 56f396146a ("scsi: BusLogic: Fix 64-bit
system enumeration error for Buslogic"), 8 years later, which shows that
there are not a lot of users.

Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox and
VMware. Both of those only emulate it for Windows 2000 and older operating
systems that did not ship with the better LSI logic driver.

Do a minimum fix that searches through the list of descriptors to find one
that matches the bus address. This is clearly as inefficient as was
indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much more
invasive.

Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Matt Wang <wwentao@vmware.com>
Tested-by: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:52:05 -04:00
Colin Ian King
07f0c8aff5 scsi: fcoe: Remove redundant assignment to variable 'wlen'
Variable wlen is being assigned a value that is never read, it is being
re-assigned with a different value later on. The assignment is redundant
and can be removed.

Cleans up clang scan build warning:
drivers/scsi/fcoe/fcoe.c:1491:2: warning: Value stored to 'wlen'
is never read [deadcode.DeadStores]

Link: https://lore.kernel.org/r/20220623164710.76831-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:45:25 -04:00
John Garry
fce54ed027 scsi: hisi_sas: Limit max hw sectors for v3 HW
If the controller is behind an IOMMU then the IOMMU IOVA caching range can
affect performance, as discussed in [0].

Limit the max HW sectors to not exceed this limit. We need to hardcode the
value until a proper DMA mapping API is available.

[0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/

Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:43:57 -04:00
Krzysztof Kozlowski
35d11ec239 scsi: ufs: ufshcd: Constify pointed data
For code safety, constify arrays and pointers to data which is not
modified.

Link: https://lore.kernel.org/r/20220623102432.108059-4-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:26:45 -04:00
Krzysztof Kozlowski
a48aac5dfc scsi: ufs: ufshcd-pltfrm: Constify pointed data
For code safety, constify pointers to data which is not modified.

Link: https://lore.kernel.org/r/20220623102432.108059-3-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27 22:26:45 -04:00
Heinz Mauelshagen
332bd07787 dm raid: fix accesses beyond end of raid member array
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.

In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)

When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.

Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().

The out-of-bounds memory accesses was discovered using KASAN.

This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).

Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-27 19:31:47 -04:00
Johan Hovold
039d4ed342 Input: usbtouchscreen - add driver_info sanity check
Add a sanity check on the device id-table driver_info field to make sure
we never access a type structure (and function pointers) outside of the
device info array (e.g. if someone fails to ifdef a device-id entry).

Note that this also suppresses a compiler warning with -Warray-bounds
(gcc-11.3.0) when compile-testing the driver without enabling any of
the device type Kconfig options:

    drivers/input/touchscreen/usbtouchscreen.c: In function 'usbtouch_probe':
    drivers/input/touchscreen/usbtouchscreen.c:1668:16⚠️ array subscript <unknown> is outside array bounds of 'struct usbtouch_device_info[0]' [-Warray-bounds]
     1668 |         type = &usbtouch_dev_info[id->driver_info];

Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220623062446.16944-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:27:37 -07:00
Chanho Park
82295bc0d1
spi: s3c64xx: move dma_release_channel to unprepare
This fixes the sequence of dma_release_channel.
Since commit f52b03c707 ("spi: s3c64xx: requests spi-dma channel only
during data transfer"),
dma_release_channel has been located in the s3c64xx_spi_transfer_one
but this makes invalid return of can_dma callback.
__spi_unmap_msg will check whether the request is requested by dma or
not via can_dma callback. When it is calling to check it, the channels
will be already released at the end of s3c64xx_spi_transfer_one so the
callback function will return always "false". So, they can't be unmapped
from __spi_unmap_msg call. To fix this, we need to add
unprepare_transfer_hardware callback and move the dma_release_channel
from s3c64xx_spi_transfer_one to there.

Fixes: f52b03c707 ("spi: s3c64xx: requests spi-dma channel only during data transfer")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220627013845.138350-1-chanho61.park@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27 23:26:54 +01:00
Guo Mengqi
917e43de2a
spi: synquacer: Add missing clk_disable_unprepare()
Add missing clk_disable_unprepare() in synquacer_spi_resume().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guo Mengqi <guomengqi3@huawei.com>
Link: https://lore.kernel.org/r/20220624005614.49434-1-guomengqi3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27 23:26:53 +01:00
Krzysztof Kozlowski
bd10b0dafd
ASoC: samsung: h1940_uda1380: include proepr GPIO consumer header
h1940_uda1380 uses gpiod*/GPIOD* so it should include GPIO consumer
header.

Fixes: 9666e27f90 ("ASoC: samsung: h1940: turn into platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627141900.470469-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27 23:26:51 +01:00
Krzysztof Kozlowski
f43ff8038e
ASoC: samsung: Enable compile test
Allow compile testing of Samsung SoC Sound drivers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27 23:26:50 +01:00
Krzysztof Kozlowski
3e4bac7cf0
ASoC: samsung: s3c24xx-i2s: Drop unneeded gpio.h include
The module does not use anything from gpio.h header.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27 23:26:49 +01:00
Krzysztof Kozlowski
17a1ffc7bc
ASoC: samsung: s3c-i2s-v2: Allow build for unsupported hardware
There is no particular need to restrict building of S3C I2S driver to
supported platforms within the C unit, because Kconfig does it.
Removing such restricting #ifdef from s3c-i2s-v2 allows compile testing
it on other platforms.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27 23:26:48 +01:00
Jeff LaBundy
f0ea452715 dt-bindings: input: iqs7222: Extend slider-mapped GPIO to IQS7222C
Although the IQS7222C does not offer slider gesture support, the
press/release event can still be mapped to any of the IQS7222C's
three GPIO pins. Update the binding to reflect this relationship.

Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-10-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:26:23 -07:00
Jeff LaBundy
6cfb357851 dt-bindings: input: iqs7222: Correct bottom speed step size
The bottom speed property is specified in steps of 1, not 4.

Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-9-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:26:22 -07:00
Jeff LaBundy
f5d2c1ed72 dt-bindings: input: iqs7222: Remove support for RF filter
The vendor has marked the RF filter enable control as reserved in
the datasheet; remove it from the binding.

Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-8-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:26:20 -07:00
Jeff LaBundy
381932cf61 Input: iqs7222 - remove support for RF filter
The vendor has marked the RF filter enable control as reserved in
the datasheet; remove it from the driver.

Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-7-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:25:58 -07:00
Jeff LaBundy
8635c68891 Input: iqs7222 - handle reset during ATI
If the device suffers a spurious reset during ATI, there is no point
in enduring any further retries. Instead, simply return successfully
from the polling loop.

In this case, the interrupt handler will intervene and recognize the
device has been reset. It then proceeds to initialize the device and
trigger ATI once more.

As part of this change, swap the order of status field evaluation to
match that of the interrupt handler, and correct a nearby off-by-one
error that causes an error message to suggest the final attempt will
be retried.

Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-6-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:25:57 -07:00
Jeff LaBundy
2e70ef525b Input: iqs7222 - acknowledge reset before writing registers
If the device suffers a spurious reset while reacting to a previous
spurious reset, the second reset interrupt is preempted because the
ACK_RESET bit is written last.

To solve this problem, write the ACK_RESET bit prior to writing any
other registers. This ensures that any registers written before the
second spurious reset will be rewritten.

Last but not least, the order in which the ACK_RESET bit is written
relative to the second filter beta register is important for select
variants of silicon. Enforce the correct order so as to not clobber
the system status register.

Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-5-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:25:55 -07:00
Jeff LaBundy
1e4189d8af Input: iqs7222 - protect volatile registers
Select variants of silicon silently mirror part of the event mask
register to the system setup register (0xD0), and vice versa. For
the following sequence:

1. Read registers 0xD0 onward and store their contents.
2. Modify the contents, including event mask fields.
3. Write registers 0xD0 onward with the modified contents.
4. Write register 0xD0 on its own again later, using the contents
   from step 1 to populate any reserved fields.

...the event mask register (e.g. address 0xDA) has been corrupted
by writing register 0xD0 with contents that were made stale after
step 3.

To solve this problem, read register 0xD0 once more between steps
3 and 4. When register 0xD0 is written during step 4, the portion
which is mirrored to the event mask register already matches what
was written in step 3.

Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-4-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:25:54 -07:00
Jeff LaBundy
95215d3d19 Input: iqs7222 - fortify slider event reporting
The release cycle of any key mapped to a slider gesture relies upon
trailing interrupts generated by other unmasked sources, the timing
and presence of which are inconsistent.

To solve this problem, explicitly report a release cycle to emulate
a full keystroke. Also, unmask touch interrupts if the slider press
event is defined; this ensures the device reports a final interrupt
with coordinate = 0xFFFF once the finger is lifted.

As a result of how the logic has been refactored, the press/release
event can now be mapped to a GPIO. This is more convenient than the
previous solution, which required each channel within the slider to
specify the same GPIO.

As part of this change, use the device's resolution rather than its
number of interrupt status registers to more safely determine if it
is capable of reporting gestures.

Last but not least, make the code a bit simpler by eliminating some
unnecessarily complex conditional statements and a macro that could
be derived using information that is already available.

Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-3-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:25:52 -07:00
Jeff LaBundy
56a0c54c4c Input: iqs7222 - correct slider event disable logic
If a positive swipe/flick gesture is defined but the corresponding
negative gesture is not, the former is inadvertently disabled. Fix
this by gently refactoring the logic responsible for disabling all
gestures by default.

As part of this change, make the code a bit simpler by eliminating
a superfluous conditional check. If a slider event does not define
an enable control, the second term of the bitwise AND operation is
simply 0xFFFF.

Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-2-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27 15:25:50 -07:00
Akira Yokosawa
5372de4e45 docs/doc-guide: Put meta title for kernel-doc HTML page
kernel-doc.rst has two 1st level section titles of "Writing
kernel-doc comments" and "Including kernel-doc comments".

Therefore, rather than using the first one, put a meta title
of "Kernel-doc comments" for the title of the resulting HTML
page by using the "title" directive.

Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/15636c13-7fa2-f973-6d3d-361222b839ef@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:40 -06:00
Akira Yokosawa
7c43214ddd docs/doc-guide: Add footnote on Inkscape for better images in PDF documents
With kernel releases v5.18 and later, if you have Inkscape, images
embedded in PDF documents are of vector graphics, not the raster
images as are the case with pre-v5.18 releases.
Even with pre-5.18 releases, having Inkscape would improve images
converted from some of SVG files which are not fully covered by the
limited capability of rsvg-convert(1) [1].

Add a footnote mentioning the expected improvements of such images.

Link: https://gitlab.gnome.org/GNOME/librsvg#non-goals-of-librsvg [1]
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/81cddbde-bc28-bec1-fca4-3c8fe2df502f@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:40 -06:00
Muhammad Usama Anjum
8206361063 docs/kselftest: add more guidelines for adding new tests
Improve and add instructions to add new tests. Add build commands to
test before sending the new test patch.

Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220521073651.4191910-1-usama.anjum@collabora.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:40 -06:00
Wu XiangCheng
6de8d58cf9 docs/zh_CN: Update zh_CN/kernel-hacking/hacking.rst to 5.19-rc1
* update to commit f35cf1a59e ("Documentation: kernel-hacking: minor
  edits for style")

* fix a homophone typo reported by Li Feng

Reported-by: Li Feng <felixlee868@icloud.com>
Signed-off-by: Wu XiangCheng <bobwxc@email.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/Yp41+eTjoPRa4hrl@bobwxc.mipc
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:40 -06:00
Yanteng Si
17c260504f docs/zh_CN: add vm vmalloced-kernel-stacks translation
Translate .../vm/vmalloced-kernel-stacks.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/01de54c7ecfd1999a636ee59ac40b79917251af2.1654585011.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:40 -06:00
Yanteng Si
3f39b3d70f docs/zh_CN: add vm page_migration translation
Translate .../vm/page_migration.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/44bc4486e5019f689bcbec20a629a9f7800ece33.1654585011.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:40 -06:00
Binbin Zhou
f41c74af10 docs/zh_CN: riscv: Update the translation of vm-layout.rst to 5.19-rc1
Synchronous translation from upstream commit 9d19f2b525
("Documentation: riscv: Add sv48 description to VM layout")

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/10cd6a241a0266d1d19ee5f0b2177d7d14d17ed2.1654685338.git.zhoubinbin@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Binbin Zhou
1a5b8aa25f docs/zh_CN: riscv: Remove the translation of pmu.rst
Synchronous translation from the following:

[1]: commit 23b1f18326ec("Documentation: riscv:
     Remove the old documentation")

[2]: commit 8933e7f2e3 ("Documentation: riscv: remove
     non-existent directory from table of contents")

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/6fe45d69210300a6c065262470bce963f8dc0ec3.1654685338.git.zhoubinbin@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Dongliang Mu
87444fdce5 docs: dev-tools: modify SPL reference URL to actual SPL doc entry
Fix the invalid url about Semantic Patch Language

Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20220613071243.12961-1-dzm91@hust.edu.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Chao Liu
d218bee86a docs: filesystems: f2fs: fix description about compress ioctl
Since commit c61404153e ("f2fs: introduce FI_COMPRESS_RELEASED
instead of using IMMUTABLE bit"), we no longer use the IMMUTABLE
bit to prevent writing data for compression. Let's correct the
corresponding documentation.

BTW, this patch fixes some alignment issues in the compress
metadata layout.

Signed-off-by: Chao Liu <liuchao@coolpad.com>
Link: https://lore.kernel.org/r/20220613020800.3379482-1-chaoliu719@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Yanteng Si
910cb3137c docs/zh_CN: Update the translation of vm index to 5.19-rc1
update to commit 481cc97349 ("mm,doc: Add new
documentation structure")

Note: There are some empty files that do not need to be updated for now,
they are:

bootmem,
oom,
page_allocation,
page_cache,
page_reclaim,
page_tables,
physical_memory
process_addrs,
shmfs,
slab,
vmalloc,
swap.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/35d10864fb9b57bf288d4efa5642f93a60079029.1655362610.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Yanteng Si
34191e04cd docs/zh_CN: Update the translation of page_owner to 5.19-rc1
update to commit d1ed51fcdb ("docs: vm/page_owner: tweak
literal block in STANDARD FORMAT SPECIFIERS")

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/e96557b73b036c33a9fa5abdab0c541704235e92.1655362610.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Yanteng Si
8829467930 docs/zh_CN: Update the translation of highmem to 5.19-rc1
update to commit 110bf7a523 ("Documentation/vm: rework
"Temporary Virtual Mappings" section")

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/76c418554d9b8d395f7e8331e8e3b89d1b7beff0.1655362610.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-27 16:24:39 -06:00
Vinay Belgaumkar
58eaa6b3fb drm/i915/guc/slpc: Use non-blocking H2G for waitboost
SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely fashion causing warnings and affecting CI.

This is seen when waitboosting happens during a stress test.
this patch updates the waitboost path to use a non-blocking
H2G call instead, which returns as soon as the message is
successfully transmitted.

v2: Use drm_notice to report any errors that might occur while
sending the waitboost H2G request (Tvrtko)
v3: Add drm_notice inside force_min_freq (Ashutosh)

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623003225.23301-1-vinay.belgaumkar@intel.com
2022-06-27 15:08:58 -07:00
Krzysztof Kozlowski
d62cac46b0 dt-bindings: clock: qcom,gcc-sdm845: add parent power domain
Allow Qualcomm GCC to register its parent power domain (e.g. RPMHPD) to
properly pass performance state from children.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220513061347.46480-2-krzysztof.kozlowski@linaro.org
2022-06-27 16:53:47 -05:00
Krzysztof Kozlowski
cb0b685377 arm64: dts: qcom: sdm630: order interrupts according to bindings
The CAMSS DTSI device node, which came after the bindings were merged,
got the interrupts ordered differently then specified in the bindings:

  sdm630-sony-xperia-nile-pioneer.dtb: camss@ca00000: interrupt-names:0: 'csid0' was expected

Reordering them to match bindings should not cause ABI issues, because
the driver relies on names, not ordering.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220509144714.144154-4-krzysztof.kozlowski@linaro.org
2022-06-27 16:46:32 -05:00
Krzysztof Kozlowski
7908dcc8be arm64: dts: qcom: sdm630: order regs according to bindings
The CAMSS DTSI device node, which came after the bindings were merged,
got the regs ordered differently then specified in the bindings:

  sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:0: 'csi_clk_mux' was expected

Reordering them to match bindings should not cause ABI issues, because
the driver relies on names, not ordering.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220509144714.144154-3-krzysztof.kozlowski@linaro.org
2022-06-27 16:46:32 -05:00
Krzysztof Kozlowski
e8881372cc arm64: dts: qcom: sdm630: order clocks according to bindings
The CAMSS DTSI device node, which came after the bindings were merged,
got the clocks ordered differently then specified in the bindings:

  sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:4: 'csid3' was expected

Reordering them to match bindings should not cause ABI issues, because
the driver relies on names, not ordering.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220509144714.144154-2-krzysztof.kozlowski@linaro.org
2022-06-27 16:46:32 -05:00
Krzysztof Kozlowski
eea939a0da ARM: dts: qcom: add missing gpio-ranges in PMIC GPIOs
The new Qualcomm PMIC GPIO bindings require gpio-ranges property:

  qcom-sdx55-telit-fn980-tlb.dtb: gpio@c000: 'gpio-ranges' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508135932.132378-5-krzysztof.kozlowski@linaro.org
2022-06-27 16:42:50 -05:00
Krzysztof Kozlowski
255889f4ba ARM: dts: qcom: pmx65: add fallback compatible to PMIC GPIO
The bindings require all PMIC GPIO nodes to have two compatibles -
specific followed by SPMI or SSBI fallback.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507194913.261121-12-krzysztof.kozlowski@linaro.org
2022-06-27 16:40:47 -05:00