Commit graph

1,188,286 commits

Author SHA1 Message Date
Vladimir Zapolskiy
c4f4035190 clk: qcom: camcc-sm8250: Fix halt on boot by reducing driver's init level
Access to I/O of SM8250 camera clock controller IP depends on enabled
GCC_CAMERA_AHB_CLK clock supplied by global clock controller, the latter
one is inited on subsys level, so, to satisfy the dependency, it would
make sense to deprive the init level of camcc-sm8250 driver.

If both drivers are compiled as built-in, there is a change that a board
won't boot up due to a race, which happens on the same init level.

Fixes: 5d66ca79b5 ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220518103554.949511-1-vladimir.zapolskiy@linaro.org
2022-06-25 22:07:53 -05:00
Krzysztof Kozlowski
d11a34a404 soc: qcom: correct kerneldoc
Correct kerneldoc warnings like:

  drivers/soc/qcom/mdt_loader.c:126:
    warning: Function parameter or member 'fw_name' not described in 'qcom_mdt_read_metadata'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073301.7072-2-krzysztof.kozlowski@linaro.org
2022-06-25 22:05:31 -05:00
Krzysztof Kozlowski
ac0126a017 soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
The use of strncpy() is considered deprecated for NUL-terminated
strings[1].  Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy.  This fixes W=1 warning:

  drivers/soc/qcom/cmd-db.c: In function ‘cmd_db_get_header.part.0’:
  drivers/soc/qcom/cmd-db.c:151:9: warning: ‘strncpy’ specified bound 8 equals destination size [-Wstringop-truncation]
    151 |         strncpy(query, id, sizeof(query));

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073301.7072-1-krzysztof.kozlowski@linaro.org
2022-06-25 22:05:31 -05:00
Krzysztof Kozlowski
ebf21bbc2f firmware: qcom_scm-legacy: correct kerneldoc
Correct kerneldoc warnings like:

  drivers/firmware/qcom_scm-legacy.c:133:
    warning: Function parameter or member 'dev' not described in 'scm_legacy_call'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073410.7358-1-krzysztof.kozlowski@linaro.org
2022-06-25 22:04:31 -05:00
Krzysztof Kozlowski
86b78de5fd dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
Document the compatible for Qualcomm QCS404 and SM6125 SCM.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220622115109.6724-1-krzysztof.kozlowski@linaro.org
2022-06-25 22:04:03 -05:00
Uwe Kleine-König
bc0f149376 soc: qcom: apr: Drop redundant check in .remove()
The remove callback is only called by the driver core if there is a
driver to unbind, so there is no need to check dev->driver to be
non-NULL.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220618203913.35785-1-u.kleine-koenig@pengutronix.de
2022-06-25 22:01:02 -05:00
Dmitry Baryshkov
48aa636285 arm64: dts: qcom: msm8996: add clocks to the MMCC device node
As we are converting this platform to use DT clock bindings, add clocks
and clock-names properties to the MMCC device tree node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-7-dmitry.baryshkov@linaro.org
2022-06-25 21:43:03 -05:00
Dmitry Baryshkov
f583741847 arm64: dts: qcom: sm8450: add uart20 node
Add device tree node for uart20, which is typically used for Bluetooth attachment.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220502195133.275209-1-dmitry.baryshkov@linaro.org
2022-06-25 21:43:03 -05:00
Srinivasa Rao Mandadapu
a57de71f09 arm64: dts: qcom: sc7280-qcard: Add ldo_l17b regulator node
Add pm7325 ldo_l17b regulator, which is required for
wcd codec vdd buck supply on sc7280-qcard board.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1650621734-10297-1-git-send-email-quic_srivasam@quicinc.com
2022-06-25 21:43:03 -05:00
Douglas Anderson
d756a0b29f arm64: dts: qcom: sc7280: Set SPI flash to 50 MHz for herobrine boards
sc7280-herobrine based boards are specced to be able to access their
SPI flash at 50 MHz with the drive strength of the pins set at 8. The
drive strength is already set to 8 in "sc7280-herobrine.dtsi", so
let's bump up the clock. The matching firmware change for this is at:

https://review.coreboot.org/c/coreboot/+/63948

NOTE: the firmware change isn't _required_ to make the kernel work at
50 MHz, it merely shows that the boards are known to work fine at 50
MHz.

ALSO NOTE: this doesn't update the "sc7280-chrome-common.dtsi" file
which is used by both herobrine boards and IDP. At the moment the IDP
boards aren't configuring a drive strength of 8 and it seems safer to
just leave them at the slower speed if they're already working.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505161425.1.Icf6f3796d2fa122b4c0566d9317b461bfbc24b7f@changeid
2022-06-25 21:43:03 -05:00
Matthias Kaehlcke
1c20d3dbaa arm64: dts: qcom: sc7280: Set modem FW path for Chrome OS boards
Specify the path of the modem FW for SC7280 Chrome OS boards in
the 'remoteproc_mpss' node.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220510104656.1.Id98b473e08c950f9a461826dde187ef7705a928c@changeid
2022-06-25 21:43:03 -05:00
Douglas Anderson
4ab03ef8b3 arm64: qcom: sc7280-herobrine: Enable DP
This enables DisplayPort for herobrine boards.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220513065704.1.I9b9b9d4d1a3e0350a89221892261881a1771ad15@changeid
2022-06-25 21:43:03 -05:00
Stephen Boyd
e60414644c arm64: dts: qcom: sc7180: Remove ipa_fw_mem node on trogdor
We don't use this carveout on trogdor boards, and having it defined in
the sc7180 SoC file causes an overlap message to be printed at boot.

 OF: reserved mem: OVERLAP DETECTED!
 memory@86000000 (0x0000000086000000--0x000000008ec00000) overlaps with memory@8b700000 (0x000000008b700000--0x000000008b710000)

Delete the node in the trogdor dtsi file to fix the overlap problem and
remove the error message.

Cc: Alex Elder <elder@linaro.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Fixes: 310b266655 ("arm64: dts: qcom: sc7180: define ipa_fw_mem node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517193307.3034602-1-swboyd@chromium.org
2022-06-25 21:43:03 -05:00
Matthias Kaehlcke
2a77ada516 arm64: dts: qcom: sc7280: Enable wifi for Chrome OS boards
Enable the 'wifi' and 'remoteproc_wpss' nodes for all sc7280
based Chrome OS boards. Delete the corresponding entries from
sc7280-idp.dtsi since this file includes sc7280-chrome-common.dtsi.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220518155252.1.I176d4254c79cfaafa38cbe36f066f02f819df9b6@changeid
2022-06-25 21:43:03 -05:00
Douglas Anderson
5069fe941f dt-bindings: arm: qcom: Add more sc7180 Chromebook board bindings
This adds board bindings for boards that are downstream but not quite
upstream yet.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220520143502.v4.5.Ie8713bc0377672ed8dd71189e66fc0b77226fb85@changeid
2022-06-25 21:43:02 -05:00
Douglas Anderson
707b9b0878 dt-bindings: arm: qcom: Add / fix sc7280 board bindings
This copy-pastes compatibles from sc7280-based boards from the device
trees to the yaml file. It also fixes the CRD/IDP bindings which had
gotten stale.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220520143502.v4.4.I1318c1ae2ce55ade1d092fc21df846360b15c560@changeid
2022-06-25 21:43:02 -05:00
Douglas Anderson
3b8bfe002c dt-bindings: arm: qcom: Add sc7180 Chromebook board bindings
This copy-pastes compatibles from sc7180-based boards from the device
trees to the yaml file so that `make dtbs_check` will be happy.

NOTES:
- I make no attempt to try to share an "item" for all sc7180 based
  Chromebooks. Because of the revision matching scheme used by the
  Chromebook bootloader, at times we need a different number of
  revisions listed.
- Some of the odd entries in here (like google,homestar-rev23 or the
  fact that "Google Lazor Limozeen without Touchscreen" changed from
  sku5 to sku6) are not typos but simply reflect reality.
- Many revisions of boards here never actually went to consumers, but
  they are still in use within various companies that were involved in
  Chromebook development. Since Chromebooks are developed with an
  "upstream first" methodology, having these revisions supported with
  upstream Linux is important. Making it easy for Chromebooks to be
  developed with an "upstream first" methodology is valuable to the
  upstream community because it improves the quality of upstream and
  gets Chromebooks supported with vanilla upstream faster.

One other note here is that, though the bootloader effectively treats
the list of compatibles in a given device tree as unordered, some
people would prefer future boards to list higher-numbered revisions
first in the list. Chromebooks here are not changing and typically
list lower revisions first just to avoid churn.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220520143502.v4.3.I9804fcd5d6c8552ab25f598dd7a3ea71b15b55f0@changeid
2022-06-25 21:43:02 -05:00
Douglas Anderson
dbbccb3db1 dt-bindings: arm: qcom: Mention that Chromebooks use a different scheme
The qcom.yaml bindings file has a whole description of what the
top-level compatible should look like for Qualcomm devices. It doesn't
match what Chromebooks do, so add a link to the Chromebook docs.

Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220520143502.v4.2.I6418884d8bab6956c7016304f45adc7df808face@changeid
2022-06-25 21:43:02 -05:00
Douglas Anderson
59228d3b90 dt-bindings: Document how Chromebooks with depthcharge boot
This documents how many Chromebooks pick the device tree that will be
passed to the OS and can help understand the revisions / SKUs listed
as the top-level "compatible" in many Chromebooks.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220520143502.v4.1.I71e42c6174f1cec17da3024c9f73ba373263b9b6@changeid
2022-06-25 21:43:02 -05:00
Matthias Kaehlcke
1a22eff4b4 arm64: dts: qcom: sc7280: Enable keyboard backlight for villager
Villager has a backlit keyboard, enable support for the backlight.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523123157.v2.2.I3d1b5a109675a0cc90e66a4e0b45cb823edbdee7@changeid
2022-06-25 21:43:02 -05:00
Matthias Kaehlcke
426e81c7e6 arm64: dts: qcom: sc7280: herobrine: Don't disable the keyboard backlight node
On herobrine boards the keyboard backlight is controlled through the
PWM LED driver. Currently both the PWM LED node and the node for the
keyboard backlight are disabled in sc7280-herobrine.dtsi, which
requires boards with a backlit keyboard to enable both nodes. There
are no other PWM LEDs on herobrine boards besides the keyboard
backlight, delete the 'disabled' status from the keyboard backlight
node, with that boards only have to enable the 'pwmleds' node for
keyboard backlight support.

Also add a label to the 'pwmleds' node to allow board files to refer to
it with a phandle.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523123157.v2.1.I47ec78581907f7ef024f10bc085f970abf01ec11@changeid
2022-06-25 21:43:02 -05:00
Douglas Anderson
e58539532b arm64: dts: qcom: sc7280: Add touchscreen to villager
This adds the touchscreen to the sc7280-herobrine-villager device
tree. Note that the touchscreen on villager actually uses the reset
line and thus we use the more specific "elan,ekth6915" compatible
which allows us to specify the reset.

The fact that villager's touchscreen uses the reset line can be
contrasted against the touchscreen for CRD/herobrine-r1. On those
boards, even though the touchscreen goes to the display, it's not
hooked up to anything there.

In order to keep the line parked on herobrine/CRD, we'll move the
pullup from the qcard.dtsi file to the specific boards. This allows us
to disable the pullup in the villager device tree since the pin is an
output.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220524134840.1.I80072b8815ac08c12af8f379a33cc2d83693dc51@changeid
2022-06-25 21:43:02 -05:00
Bjorn Andersson
1ecbc2b37f v5.19-rc1 +
20220608105238.2973600-2-dmitry.baryshkov@linaro.org +
 20220608105238.2973600-3-dmitry.baryshkov@linaro.org +
 20220608105238.2973600-4-dmitry.baryshkov@linaro.org
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmK3xlwbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FiokP/RmYCJFMZsX5wv49iFjb
 BndHsraJQ8MNcXNNst5fRArMZgMFlijSSu0Umkmal8MHlOq/70wGXwGLJA005XjT
 5hHjHNBolbcDEkQIuOctAgqzGgJYJ2sj/kK8kPwspdv2sLd7Yo/xQ2KYBagldRN8
 z69AC4W0bwpXRLBqniLd839Ey5f5gQITacOHohF1eDJ+h4RX9NfPEPlGIxeHAcLP
 dWgAXRyJixK5IsFmmKyYcv4ESTNniN36pN/RtAv6ZASNdXpyJ9K+v8EGU7NDRvj8
 01eN52VtIjpCjq4s5bUEEWcfap9CMgO7AQ0eRC4kIILNaw4hdZFQazoVoXEfUsFG
 W6v2D2t/lnHWTwYHB0h3hX/WIXup1Na8J4payiEoBRKo4kjBNCyjSbWQhALRdhl2
 CaA6bepyuOCWfo+sBbEw9svQWwH4xgS9JF9hrG+eRcmEUYBcp9MP8SozJoOJz8Ss
 TenmNYHNZ7f0fDpDn5Am37olj0KywzW8xM5NTHfPKaLgDKNip4R3VeVapQLHhyJv
 Xw812Urn8dNficyH9ftLMRieiA7GQjjEZZz9cfYMd5X0adWcwySAeFIcUXAcBrWQ
 rEXP/RejbtTs9I+q7tvHgtsqGjE4DQTxdM2R7SHvRsLYhBVibHNaWOQnjHSKGgjv
 seuvt+k8YXd3nUmKAwgRztMk
 =DEZe
 -----END PGP SIGNATURE-----

Merge tag '20220608105238.2973600-1-dmitry.baryshkov@linaro.org' into clk-for-5.20

v5.19-rc1 +
20220608105238.2973600-2-dmitry.baryshkov@linaro.org +
20220608105238.2973600-3-dmitry.baryshkov@linaro.org +
20220608105238.2973600-4-dmitry.baryshkov@linaro.org
2022-06-25 21:38:04 -05:00
Dmitry Baryshkov
553d12b20c clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220608105238.2973600-4-dmitry.baryshkov@linaro.org
2022-06-25 21:36:08 -05:00
Dmitry Baryshkov
7ee9d2e8b9 clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220608105238.2973600-3-dmitry.baryshkov@linaro.org
2022-06-25 21:36:08 -05:00
Dmitry Baryshkov
74e4190cde clk: qcom: regmap: add PHY clock source implementation
On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
muxes which must be parked to the "safe" source (bi_tcxo) when
corresponding GDSC is turned off and on again. Currently this is
handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
clock. However the same code sequence should be applied in the
pcie-qcom endpoint, USB3 and UFS drivers.

Rather than copying this sequence over and over again, follow the
example of clk_rcg2_shared_ops and implement this parking in the
enable() and disable() clock operations. Supplement the regmap-mux with
the new clk_regmap_phy_mux type, which implements such multiplexers
as a simple gate clocks.

This is possible since each of these multiplexers has just two clock
sources: one coming from the PHY and a reference (XO) one.  If the clock
is running off the from-PHY source, report it as enabled. Report it as
disabled otherwise (if it uses reference source).

This way the PHY will disable the pipe clock before turning off the
GDSC, which in turn would lead to disabling corresponding pipe_clk_src
(and thus it being parked to a safe, reference clock source). And vice
versa, after enabling the GDSC the PHY will enable the pipe clock, which
would cause pipe_clk_src to be switched from a safe source to the
working one.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220608105238.2973600-2-dmitry.baryshkov@linaro.org
2022-06-25 21:36:07 -05:00
Jason A. Donenfeld
067baa9a37 ksmbd: use vfs_llseek instead of dereferencing NULL
By not checking whether llseek is NULL, this might jump to NULL. Also,
it doesn't check FMODE_LSEEK. Fix this by using vfs_llseek(), which
always does the right thing.

Fixes: f441584858 ("cifsd: add file operations")
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-25 19:52:49 -05:00
Christophe Leroy
d7f3964615 powerpc/powermac: Remove empty function note_scsi_host()
note_scsi_host() has been an empty function since
commit 6ee0d9f744 ("[POWERPC] Remove unused old code
from powermac setup code").

Remove it.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/26f8b72a4276c0bd8ed63860c7316f6361c351b4.1655978907.git.christophe.leroy@csgroup.eu
2022-06-26 10:29:44 +10:00
Michael Ellerman
2d38676975 powerpc: Update asm-prototypes.h comment
This header was recently cleaned up in commit 76222808fc ("powerpc:
Move C prototypes out of asm-prototypes.h"), update the comment to
reflect it's proper purpose.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617080243.2177583-1-mpe@ellerman.id.au
2022-06-26 10:29:43 +10:00
Michael Ellerman
4228a996b0 selftests/powerpc: Skip energy_scale_info test on older firmware
Older machines don't have the firmware feature that enables the code
this test is testing. Skip the test if the sysfs directory doesn't
exist. Also use the FAIL_IF() macro to provide more verbose error
reporting if an error is encountered.

Fixes: 57201d657e ("selftest/powerpc: Add PAPR sysfs attributes sniff test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619233103.2666171-1-mpe@ellerman.id.au
2022-06-26 10:29:43 +10:00
Guodong Liu
2e0a524157 pinctrl: mediatek: fix the pinconf definition of some GPIO pins
Remove pin definitions that do not support the R0 & R1 pinconfig property.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-6-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:25:14 +02:00
Guodong Liu
23b044e5c9 pinctrl: mediatek: dropping original advanced drive configuration function
Function bias_combo getter/setters already handle all cases advanced drive
configuration, include drive for I2C related pins.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-5-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:25:13 +02:00
Guodong Liu
fe44e49840 pinctrl: mediatek: add rsel setting on mt8192
1. I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on mt8192.
2. Also add the missing pull type array for mt8192 to document the
pull type of each pin and prevent invalid pull type settings.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-4-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:25:13 +02:00
Guodong Liu
e104141a13 pinctrl: mediatek: add drive for I2C related pins on mt8192
This patch provides the advanced drive raw data setting version
for I2C used pins on mt8192.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-3-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:25:13 +02:00
Guodong Liu
a36474f59a pinctrl: mediatek: add generic driving setup property on mt8192
1. The dt-binding expects that drive-strength arguments be passed
in mA, but the driver was expecting raw values. And that this
commit changes the driver so that it is aligned with the binding.
2. This commit provides generic driving setup, which support
2/4/6/8/10/12/14/16mA driving, original driver just set raw data
setup setting when use drive-strength property.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220624133700.15487-2-guodong.liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:25:13 +02:00
Stefan Wahren
08752e0749 pinctrl: bcm2835: Make the irqchip immutable
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. The bcm2835 pinctrl is also affected by this
warning.

Fix this by making the irqchip in the bcm2835 pinctrl driver immutable.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:03:39 +02:00
Stefan Wahren
db1b3ecee9 pinctrl: bcm2835: drop irq_enable/disable callbacks
The commit b8a19382ac ("pinctrl: bcm2835: Fix support for threaded level
triggered IRQs") assigned the irq_mask/unmask callbacks with the
already existing functions for irq_enable/disable. The wasn't completely
the right way (tm) to fix the issue, because these callbacks shouldn't
be identical. So fix this by rename the functions to represent their
intension and drop the unnecessary irq_enable/disable assigment.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220614202831.236341-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:03:39 +02:00
Lukas Bulwahn
f9446fd1e9 MAINTAINERS: add include/dt-bindings/pinctrl to PIN CONTROL SUBSYSTEM
Maintainers of the directory Documentation/devicetree/bindings/pinctrl
are also the maintainers of the corresponding directory
include/dt-bindings/pinctrl.

Add the file entry for include/dt-bindings/pinctrl to the appropriate
section in MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613122955.20714-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 01:00:39 +02:00
Nikita Travkin
44339391c6 pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed
GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the
function was never assigned to the pingroup (even though the function
exists already).

Add this mode to the related pins.

Fixes: 5373a2c5ab ("pinctrl: qcom: Add msm8916 pinctrl driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220612145955.385787-4-nikita@trvn.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 00:54:10 +02:00
Srinivasa Rao Mandadapu
36fe26843d pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets
Update lpass lpi pin control driver, with clock optional check for ADSP
disabled platforms. This check required for distingushing ADSP based
platforms and ADSP bypass platforms.
In case of ADSP enabled platforms, where audio is routed through ADSP
macro and decodec GDSC Switches are triggered as clocks by pinctrl
driver and ADSP firmware controls them. So It's mandatory to enable
them in ADSP based solutions.
In case of ADSP bypass platforms clock voting is optional as these macro
and dcodec GDSC switches are maintained as power domains and operated from
lpass clock drivers.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 00:50:41 +02:00
Srinivasa Rao Mandadapu
174eceeafb dt-bindings: pinctrl: qcom: sc7280: Add boolean param for ADSP bypass platforms
Add boolean param qcom,adsp-bypass-mode to support adsp bypassed sc7280
platforms. Which is required to make clock voting as optional for ADSP
bypass platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26 00:50:41 +02:00
Jiang Jian
d16c5c7c92 parisc: align '*' in comment in math-emu code
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-26 00:19:27 +02:00
Sami Tolvanen
ff13976676 kbuild: Ignore __this_module in gen_autoksyms.sh
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>
2022-06-26 06:15:05 +09:00
Masahiro Yamada
53632ba87d kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.

Commit 3fdc7d3fe4 ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.

Now I realized I had applied a wrong patch.

In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".

In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".

Restore the code I intended in v1.

[1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/

Fixes: 3fdc7d3fe4 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-06-26 06:15:05 +09:00
Dmitry Baryshkov
e7c659124c clk: qcom: mmcc-msm8996: use parent_hws/_data instead of parent_names
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-6-dmitry.baryshkov@linaro.org
2022-06-25 15:18:15 -05:00
Dmitry Baryshkov
208c564fe6 clk: qcom: mmcc-msm8996: move clock parent tables down
Move clock parent tables down, after the MMPLL declrataions, so that we
can use gpll hw clock fields in the next commit.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-5-dmitry.baryshkov@linaro.org
2022-06-25 15:17:52 -05:00
Dmitry Baryshkov
a7a4fc9498 clk: qcom: mmcc-msm8996: use ARRAY_SIZE instead of specifying num_parents
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220617122922.769562-4-dmitry.baryshkov@linaro.org
2022-06-25 15:17:30 -05:00
Jiang Jian
c19698a9e4 firmware: qcom_scm: drop unexpected word "the"
there is an unexpected word "the" in the comments that need to be dropped

> * will cause the the boot stages to enter download mode, unless

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621094924.83135-1-jiangjian@cdjrlc.com
2022-06-25 15:15:57 -05:00
Dmitry Baryshkov
fc8b0b9b63 arm64: dts: qcom: sm8450 add ITS device tree node
Add device tree node corresponding to the ITS part of GICv3.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220502192604.272686-1-dmitry.baryshkov@linaro.org
2022-06-25 15:13:56 -05:00
Konrad Dybcio
47bf59c475 arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
CPU6 and CPU7 were mistakengly pointing to CPU5 reg. Fix it.

Fixes: 02d8091bbc ("arm64: dts: qcom: msm8994: Add a proper CPU map")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220501184016.64138-1-konrad.dybcio@somainline.org
2022-06-25 15:12:44 -05:00