Commit graph

1,188,286 commits

Author SHA1 Message Date
Mike Christie
e1c6a7ec14 scsi: iscsi: Remove iscsi_get_task back_lock requirement
We currently require that the back_lock is held when calling the functions
that manipulate the iscsi_task refcount. The only reason for this is to
handle races where we are handling SCSI-ml EH callbacks and the cmd is
completing at the same time the normal completion path is running, and we
can't return from the EH callback until the driver has stopped accessing
the cmd. Holding the back_lock while also accessing the task->state made it
simple to check that a cmd is completing and also get/put a refcount at the
same time, and at the time we were not as concerned about performance.

The problem is that we don't want to take the back_lock from the xmit path
for normal I/O since it causes contention with the completion path if the
user has chosen to try and split those paths on different CPUs (in this
case abusing the CPUs and ignoring caching improves perf for some uses).

Begins to remove the back_lock requirement for iscsi_get/put_task by
removing the requirement for the get path. Instead of always holding the
back_lock we detect if something has done the last put and is about to call
iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the
last put on a task and only grab the back_lock if the refcount is now zero
and it's going to call iscsi_free_task().

Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
533ac412fd scsi: iscsi: Remove unneeded task state check
Commit 5923d64b7a ("scsi: libiscsi: Drop taskqueuelock") added an extra
task->state because for commit 6f8830f5bb ("scsi: libiscsi: add lock
around task lists to fix list corruption regression") we didn't know why we
ended up with cmds on the list and thought it might have been a bad target
sending a response while we were still sending the cmd. We were never able
to get a target to send us a response early, because it turns out the bug
was just a race in libiscsi/libiscsi_tcp where:

 1. iscsi_tcp_r2t_rsp() queues a r2t to tcp_task->r2tqueue.

 2. iscsi_tcp_task_xmit() runs iscsi_tcp_get_curr_r2t() and sees we have a
    r2t. It dequeues it and iscsi_tcp_task_xmit() starts to process it.

 3. iscsi_tcp_r2t_rsp() runs iscsi_requeue_task() and puts the task on the
    requeue list.

 4. iscsi_tcp_task_xmit() sends the data for r2t. This is the final chunk
    of data, so the cmd is done.

 5. target sends the response.

 6. On a different CPU from #3, iscsi_complete_task() processes the
    response.  Since there was no common lock for the list, the lists/tasks
    pointers are not fully in sync, so could end up with list corruption.

Since it was just a race on our side, remove the extra check and fix up the
comments.

Link: https://lore.kernel.org/r/20220616224557.115234-7-michael.christie@oracle.com
Reviewed-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
9b89153680 scsi: iscsi_tcp: Drop target_alloc use
For software iSCSI, we do a session per host so there is no need to set the
target's can_queue since it's the same as the host one. Setting it just
results in extra atomic checks in the main I/O path.

Link: https://lore.kernel.org/r/20220616224557.115234-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
f93a722fa7 scsi: iscsi_tcp: Tell net when there's more data
If we have more data, set the MSG_SENDPAGE_NOTLAST in case we go down the
sendpage path.

Link: https://lore.kernel.org/r/20220616224557.115234-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:23 -04:00
Mike Christie
f1d269765e scsi: iscsi: Run recv path from workqueue
We don't always want to run the recv path from the network softirq because
when we have to have multiple sessions sharing the same CPUs, some sessions
can eat up the NAPI softirq budget and affect other sessions or users.

Allow us to queue the recv handling to the iscsi workqueue so we can have
the scheduler/wq code try to balance the work and CPU use across all
sessions' worker threads.

Note: It wasn't the original intent of the change but a nice side effect is
that for some workloads/configs we get a nice performance boost. For a
simple read heavy test:

  fio --direct=1 --filename=/dev/dm-0  --rw=randread --bs=256K
    --ioengine=libaio --iodepth=128 --numjobs=4

where the iscsi threads, fio jobs, and rps_cpus share CPUs we see a 32%
throughput boost. We also see increases for small I/O IOPs tests but it's
not as high.

Link: https://lore.kernel.org/r/20220616224557.115234-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:22 -04:00
Mike Christie
8af809966c scsi: iscsi: Add recv workqueue helpers
Add helpers to allow the drivers to run their recv paths from libiscsi's
workqueue.

Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:22 -04:00
Mike Christie
4b9f8ce4d5 scsi: iscsi: Rename iscsi_conn_queue_work()
Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that
it handles queueing of xmits only.

Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:19:22 -04:00
Mike Christie
31500e9027 scsi: iscsi: Fix session removal on shutdown
When the system is shutting down, iscsid is not running so we will not get
a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown
will then hang waiting on userspace to remove the session.

This has libiscsi force the destruction of the session from the kernel when
iscsi_host_remove() is called from a driver's shutdown callout.

This fixes a regression added in qedi boot with commit d1f2ce7763 ("scsi:
qedi: Fix host removal with running sessions") which made qedi use the
common session removal function that waits on userspace instead of rolling
its own kernel based removal.

Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com
Fixes: d1f2ce7763 ("scsi: qedi: Fix host removal with running sessions")
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:54 -04:00
Mike Christie
7bf01eb0d4 scsi: qedi: Use QEDI_MODE_NORMAL for error handling
When handling errors that lead to host removal use QEDI_MODE_NORMAL. There
is currently no difference in behavior between NORMAL and SHUTDOWN, but in
a subsequent commit we will want to know when we are called from the
pci_driver shutdown callout vs remove/err_handler so we know when userspace
is up.

Link: https://lore.kernel.org/r/20220616222738.5722-6-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:54 -04:00
Mike Christie
bb42856bfd scsi: iscsi: Add helper to remove a session from the kernel
During qedi shutdown we need to stop the iSCSI layer from sending new nops
as pings and from responding to target ones and make sure there is no
running connection cleanups. Commit d1f2ce7763 ("scsi: qedi: Fix host
removal with running sessions") converted the driver to use the libicsi
helper to drive session removal, so the above issues could be handled. The
problem is that during system shutdown iscsid will not be running so when
we try to remove the root session we will hang waiting for userspace to
reply.

Add a helper that will drive the destruction of sessions like these during
system shutdown.

Link: https://lore.kernel.org/r/20220616222738.5722-5-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:54 -04:00
Mike Christie
da2f132d00 scsi: iscsi: Clean up bound endpoints during shutdown
In the next patch we allow drivers to drive session removal during
shutdown. In this case iscsid will not be running, so we need to detect
bound endpoints and disconnect them. This moves the bound ep check so we
now always check.

Link: https://lore.kernel.org/r/20220616222738.5722-4-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:53 -04:00
Mike Christie
3328333b47 scsi: iscsi: Allow iscsi_if_stop_conn() to be called from kernel
iscsi_if_stop_conn() is only called from the userspace interface but in a
subsequent commit we will want to call it from the kernel interface to
allow drivers like qedi to remove sessions from inside the kernel during
shutdown. This removes the iscsi_uevent code from iscsi_if_stop_conn() so we
can call it in a new helper.

Link: https://lore.kernel.org/r/20220616222738.5722-3-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:53 -04:00
Mike Christie
c577ab7ba5 scsi: iscsi: Fix HW conn removal use after free
If qla4xxx doesn't remove the connection before the session, the iSCSI
class tries to remove the connection for it. We were doing a
iscsi_put_conn() in the iter function which is not needed and will result
in a use after free because iscsi_remove_conn() will free the connection.

Link: https://lore.kernel.org/r/20220616222738.5722-2-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:14:53 -04:00
Ren Zhijie
f54912b228 scsi: ufs: ufs-mediatek: Fix build error and type mismatch
If CONFIG_PM_SLEEP is not set.

make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:

drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
    snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
                                             ~^   ~~~~~~
                                             %lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
  ret = ufshcd_system_suspend(dev);
        ^~~~~~~~~~~~~~~~~~~~~
        ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
  return ufshcd_system_resume(dev);
         ^~~~~~~~~~~~~~~~~~~~
         ufs_mtk_system_resume
cc1: some warnings being treated as errors

The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.

Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com
Fixes: 3fd23b8dfb ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21 21:01:12 -04:00
Dave Airlie
0a2af0bd6e drm-misc-next for v5.20:
UAPI Changes:
 
 Cross-subsystem Changes:
 
  * dma-buf: Add sync-file API; Set DMA mask for udmabuf devices
 
  * fbcon: Cleanups
 
  * fbdev: Disable firmware-device registration when first native driver loads
 
  * iosys-map: Documentation fixes
 
 Core Changes:
 
  * edid: Use struct drm_edid in more places
 
  * gem-cma-helper: Improve documentation
 
  * of: Add data-lane helpers and convert drivers
 
  * syncobj: Fixes
 
 Driver Changes:
 
  * amdgpu: Build fixes
 
  * ast: Support multiple outputs
 
  * bochs: Include <linux/module.h>
 
  * bridge: adv7511: I2C fixes; anx7625: Fix error handling; lt6505: Kconfig fixes
 
  * display/dp: Documentation fixes
 
  * display/dp-mst: Read extended DPCD capabilities during system resume
 
  * logicvc: Add new driver
 
  * magag200: Build fixes
 
  * nouveau: Cleanups
 
  * panel: Add backlight support; nt36672a: DT backlight support
 
  * qxl: Cleanups
 
  * sun4i: HDMI PHY cleanups
 
  * vc4: Add support for BCM2711
 
  * virt-gpu: Avoid NULL dereference; Fix error checks; Cleanups
 
  * vkms: Allocate output buffer with vmalloc(); Fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmKsKwAACgkQaA3BHVML
 eiPnJAgArdU7DOVUuRm0clRBHNndob37pICGbvdh84jNEpHq6rdfpi7HGqvNYvSy
 KyVhBPKFxygDyXNrgFh5YnMLX8Gr+S73VRKXc19k5tc3KYG9W36Vg/aBL7fXqs1F
 VDGgC0uksMIA2X0J03a+cZuQV8drYoWLUO7Pz0TcqFE+9cSSBe8gJb6lSt9rPIYx
 0YTFWsHbL9VeW/VuhyG11KLL3s2SGofP4lw8i7H01RQJRGYo/Ak95ysA9Uo/4AXA
 nwOoK46MqPtsqs+dxGU/Ix6jP8KHSGMPKb+WEfv8WDQvdhOnOyUsza3V2Uma2H+M
 2wlAkJnhyUXletzTRQBUnGFBHcccpA==
 =8nrd
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2022-06-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.20:

UAPI Changes:

Cross-subsystem Changes:

 * dma-buf: Add sync-file API; Set DMA mask for udmabuf devices

 * fbcon: Cleanups

 * fbdev: Disable firmware-device registration when first native driver loads

 * iosys-map: Documentation fixes

Core Changes:

 * edid: Use struct drm_edid in more places

 * gem-cma-helper: Improve documentation

 * of: Add data-lane helpers and convert drivers

 * syncobj: Fixes

Driver Changes:

 * amdgpu: Build fixes

 * ast: Support multiple outputs

 * bochs: Include <linux/module.h>

 * bridge: adv7511: I2C fixes; anx7625: Fix error handling; lt6505: Kconfig fixes

 * display/dp: Documentation fixes

 * display/dp-mst: Read extended DPCD capabilities during system resume

 * logicvc: Add new driver

 * magag200: Build fixes

 * nouveau: Cleanups

 * panel: Add backlight support; nt36672a: DT backlight support

 * qxl: Cleanups

 * sun4i: HDMI PHY cleanups

 * vc4: Add support for BCM2711

 * virt-gpu: Avoid NULL dereference; Fix error checks; Cleanups

 * vkms: Allocate output buffer with vmalloc(); Fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YqwriEhn0l4uO+Gn@linux-uq9g
2022-06-22 10:33:09 +10:00
Pavel Begunkov
c0737fa9a5 io_uring: fix double poll leak on repolling
We have re-polling for partial IO, so a request can be polled twice. If
it used two poll entries the first time then on the second
io_arm_poll_handler() it will find the old apoll entry and NULL
kmalloc()'ed second entry, i.e. apoll->double_poll, so leaking it.

Fixes: 10c873334f ("io_uring: allow re-poll if we made progress")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fee2452494222ecc7f1f88c8fb659baef971414a.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-21 17:24:37 -06:00
Pavel Begunkov
9d2ad2947a io_uring: fix wrong arm_poll error handling
Leaving ip.error set when a request was punted to task_work execution is
problematic, don't forget to clear it.

Fixes: aa43477b04 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6c84ef4182c6962380aebe11b35bdcb25b0ccfb.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-21 17:24:37 -06:00
Pavel Begunkov
c487a5ad48 io_uring: fail links when poll fails
Don't forget to cancel all linked requests of poll request when
__io_arm_poll_handler() failed.

Fixes: aa43477b04 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a78aad962460f9fdfe4aa4c0b62425c88f9415bc.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-21 17:24:37 -06:00
Frederic Weisbecker
0ffc781a19 context_tracking: Rename __context_tracking_enter/exit() to __ct_user_enter/exit()
The context tracking namespace is going to expand and some new functions
will require even longer names. Start shrinking the context_tracking
prefix to "ct" as is already the case for some existing macros, this
will make the introduction of new functions easier.

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-21 16:08:18 -07:00
Zqiang
7bf336fb8d refscale: Convert test_lock spinlock to raw_spinlock
In kernels built with CONFIG_PREEMPT_RT=y, spinlocks are replaced by
rt_mutex, which can sleep.  This means that acquiring a non-raw spinlock
in a critical section where preemption is disabled can trigger the
following BUG:

BUG: scheduling while atomic: ref_scale_reade/76/0x00000002
Preemption disabled at:
ref_lock_section+0x16/0x80
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
__schedule_bug.cold+0x9c/0xad
__schedule+0x839/0xc00
schedule_rtlock+0x22/0x40
rtlock_slowlock_locked+0x460/0x1350
rt_spin_lock+0x61/0xe0
ref_lock_section+0x29/0x80
rcu_scale_one_reader+0x52/0x60
ref_scale_reader+0x28d/0x490
kthread+0x128/0x150
ret_from_fork+0x22/0x30
</TASK>

This commit therefore converts spinlock to raw_spinlock.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Li Qiong
1a5ca5e098 rcutorture: Handle failure of memory allocation functions
This commit adds warnings for allocation failure during the mem_dump_obj()
tests.  It also terminates these tests upon such failure.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Frederic Weisbecker
3002153a91 rcutorture: Fix ksoftirqd boosting timing and iteration
The RCU priority boosting can fail in two situations:

1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs
is higher than those brought online at boot, then torture_onoff() may
later bring up CPUs that weren't online on boot. Now since rcutorture
initialization only boosts the ksoftirqds of the CPUs that have been
set online on boot, the CPUs later set online by torture_onoff won't
benefit from the boost, making RCU priority boosting fail.

2) The ksoftirqd kthreads are boosted after the creation of
rcu_torture_boost() kthreads, which opens a window large enough for these
rcu_torture_boost() kthreads to wait (despite running at FIFO priority)
for ksoftirqds that are still running at SCHED_NORMAL priority.

The issues can trigger for example with:

	./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y"

	[   34.968561] rcu-torture: !!!
	[   34.968627] ------------[ cut here ]------------
	[   35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610
	[   35.052043] Modules linked in:
	[   35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1
	[   35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
	[   35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610
	[   35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82
	[   37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202
	[   37.277320] rcu: De-offloading 8
	[   37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
	[   37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff
	[   37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff
	[   37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20
	[   37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0
	[   37.290427] FS:  0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000
	[   37.290448] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	[   37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0
	[   37.290470] Call Trace:
	[   37.295049]  <TASK>
	[   37.295065]  ? preempt_count_add+0x63/0x90
	[   37.295095]  ? _raw_spin_lock_irqsave+0x12/0x40
	[   37.295125]  ? rcu_torture_stats_print+0x610/0x610
	[   37.295143]  rcu_torture_stats+0x29/0x70
	[   37.295160]  kthread+0xe3/0x110
	[   37.295176]  ? kthread_complete_and_exit+0x20/0x20
	[   37.295193]  ret_from_fork+0x22/0x30
	[   37.295218]  </TASK>

Fix this with boosting the ksoftirqds kthreads from the boosting
hotplug callback itself and before the boosting kthreads are created.

Fixes: ea6d962e80 ("rcutorture: Judge RCU priority boosting on grace periods, not callbacks")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Paul E. McKenney
148df92fb1 torture: Create kvm-check-branches.sh output in proper location
Currently, kvm-check-branches.sh causes each kvm.sh invocation create a
separate date-stamped directory, then after that invocation completes,
moves it into the *-group/NNNN directory.  This works, but makes it more
difficult to monitor an ongoing run.  This commit therefore uses the
kvm.sh --datestamp argument to make kvm.sh put the output in the right
place to start with, and also dispenses with the additional level of
datestamping.  (Those wanting datestamps can find them in the log files.)

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Zqiang
9236681064 rcuscale: Fix smp_processor_id()-in-preemptible warnings
Systems built with CONFIG_DEBUG_PREEMPT=y can trigger the following
BUG while running the rcuscale performance test:

BUG: using smp_processor_id() in preemptible [00000000] code: rcu_scale_write/69
CPU: 0 PID: 66 Comm: rcu_scale_write Not tainted 5.18.0-rc7-next-20220517-yoctodev-standard+
caller is debug_smp_processor_id+0x17/0x20
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
check_preemption_disabled+0xdf/0xf0
debug_smp_processor_id+0x17/0x20
rcu_scale_writer+0x2b5/0x580
kthread+0x177/0x1b0
ret_from_fork+0x22/0x30
</TASK>

Reproduction method:
runqemu kvm slirp nographic qemuparams="-m 4096 -smp 8" bootparams="isolcpus=2,3
nohz_full=2,3 rcu_nocbs=2,3 rcutree.dump_tree=1 rcuscale.shutdown=false
rcuscale.gp_async=true" -d

The problem is that the rcu_scale_writer() kthreads fail to set the
PF_NO_SETAFFINITY flags, which causes is_percpu_thread() to assume
that the kthread's affinity might change at any time, thus the BUG
noted above.

This commit therefore causes rcu_scale_writer() to set PF_NO_SETAFFINITY
in its kthread's ->flags field, thus preventing this BUG.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Paul E. McKenney
8c0666d320 rcutorture: Make failure indication note reader-batch overflow
The loop scanning the pipesummary[] array currently skips the last
element, which means that the diagnostics ignore those rarest of
situations, namely where some readers persist across more than ten
grace periods, but all other readers avoid spanning a full grace period.
This commit therefore adjusts the scan to include the last element of
this array.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Paul E. McKenney
5c92d75016 torture: Adjust to again produce debugging information
A recent change to the DEBUG_INFO Kconfig option means that simply adding
CONFIG_DEBUG_INFO=y to the .config file and running "make oldconfig" no
longer works.  It is instead necessary to add CONFIG_DEBUG_INFO_NONE=n
and (for example) CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y.
This combination will then result in CONFIG_DEBUG_INFO being selected.

This commit therefore updates the Kconfig options produced in response
to the kvm.sh --gdb, --kasan, and --kcsan Kconfig options.

Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Zqiang
98ea203287 rcutorture: Fix memory leak in rcu_test_debug_objects()
The kernel memory leak detector located the following:

unreferenced object 0xffff95d941135b50 (size 16):
  comm "swapper/0", pid 1, jiffies 4294667610 (age 1367.451s)
  hex dump (first 16 bytes):
    f0 c6 c2 bd d9 95 ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000bc81d9b1>] kmem_cache_alloc_trace+0x2f6/0x500
    [<00000000d28be229>] rcu_torture_init+0x1235/0x1354
    [<0000000032c3acd9>] do_one_initcall+0x51/0x210
    [<000000003c117727>] kernel_init_freeable+0x205/0x259
    [<000000003961f965>] kernel_init+0x1a/0x120
    [<000000001998f890>] ret_from_fork+0x22/0x30

This is caused by the rcu_test_debug_objects() function allocating an
rcu_head structure, then failing to free it.  This commit therefore adds
the needed kfree() after the last use of this structure.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:57:04 -07:00
Paul E. McKenney
d984114ec2 rcutorture: Simplify rcu_torture_read_exit_child() loop
The existing loop has an implicit manual loop that obscures the flow
and requires an extra control variable.  This commit makes this implicit
loop explicit, thus saving several lines of code.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:56:46 -07:00
Anna-Maria Behnsen
14c0017c19 rcu/torture: Change order of warning and trace dump
Dumping a big ftrace buffer could lead to a RCU stall. So there is the
ftrace buffer and the stall information which needs to be printed. When
there is additionally a WARN_ON() which describes the reason for the ftrace
buffer dump and the WARN_ON() is executed _after_ ftrace buffer dump, the
information get lost in the middle of the RCU stall information.

Therefore print WARN_ON() message before dumping the ftrace buffer in
rcu_torture_writer().

[ paulmck: Add tracing_off() to avoid cruft from WARN(). ]

Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:55:02 -07:00
Waiman Long
e72ee5e1a8 rcu-tasks: Use delayed_work to delay rcu_tasks_verify_self_tests()
Commit 2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks
boot-time testing") fixes false positive rcu_tasks verification check
failure by repeating the test once every second until timeout using
schedule_timeout_uninterruptible().

Since rcu_tasks_verify_selft_tests() is called from do_initcalls()
as a late_initcall, this has the undesirable side effect of delaying
other late_initcall's queued after it by a second or more.  Fix this by
instead using delayed_work to repeat the verification check.

Fixes: 2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-21 15:49:38 -07:00
Paul E. McKenney
1cf1144e84 rcu-tasks: Be more patient for RCU Tasks boot-time testing
The RCU-Tasks family of grace-period primitives can take some time to
complete, and the amount of time can depend on the exact hardware and
software configuration.  Some configurations boot up fast enough that the
RCU-Tasks verification process gets false-positive failures.  This commit
therefore allows up to 30 seconds for the grace periods to complete, with
this value adjustable downwards using the rcupdate.rcu_task_stall_timeout
kernel boot parameter.

Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
2022-06-21 15:49:38 -07:00
Paul E. McKenney
eea3423b16 rcu-tasks: Update comments
This commit updates comments to reflect the changes in the series
of commits that eliminated the full task-list scan.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
2022-06-21 15:49:38 -07:00
Paul E. McKenney
56096ecd5b rcu-tasks: Disable and enable CPU hotplug in same function
The rcu_tasks_trace_pregp_step() function invokes cpus_read_lock() to
disable CPU hotplug, and a later call to the rcu_tasks_trace_postscan()
function invokes cpus_read_unlock() to re-enable it.  This was absolutely
necessary in the past in order to protect the intervening scan of the full
tasks list, but there is no longer such a scan.  This commit therefore
improves readability by moving the cpus_read_unlock() call to the end
of the rcu_tasks_trace_pregp_step() function.  This commit is a pure
code-motion commit without any (intended) change in functionality.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
2022-06-21 15:49:38 -07:00
Paul E. McKenney
e386b67257 rcu-tasks: Eliminate RCU Tasks Trace IPIs to online CPUs
Currently, the RCU Tasks Trace grace-period kthread IPIs each online CPU
using smp_call_function_single() in order to track any tasks currently in
RCU Tasks Trace read-side critical sections during which the corresponding
task has neither blocked nor been preempted.  These IPIs are annoying
and are also not strictly necessary because any task that blocks or is
preempted within its current RCU Tasks Trace read-side critical section
will be tracked on one of the per-CPU rcu_tasks_percpu structure's
->rtp_blkd_tasks list.  So the only time that this is a problem is if
one of the CPUs runs through a long-duration RCU Tasks Trace read-side
critical section without a context switch.

Note that the task_call_func() function cannot help here because there is
no safe way to identify the target task.  Of course, the task_call_func()
function will be very useful later, when processing the list of tasks,
but it needs to know the task.

This commit therefore creates a cpu_curr_snapshot() function that returns
a pointer the task_struct structure of some task that happened to be
running on the specified CPU more or less during the time that the
cpu_curr_snapshot() function was executing.  If there was no context
switch during this time, this function will return a pointer to the
task_struct structure of the task that was running throughout.  If there
was a context switch, then the outgoing task will be taken care of by
RCU's context-switch hook, and the incoming task was either already taken
care during some previous context switch, or it is not currently within an
RCU Tasks Trace read-side critical section.  And in this latter case, the
grace period already started, so there is no need to wait on this task.

This new cpu_curr_snapshot() function is invoked on each CPU early in
the RCU Tasks Trace grace-period processing, and the resulting tasks
are queued for later quiescent-state inspection.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
2022-06-21 15:49:38 -07:00
Paul E. McKenney
ffcc21a315 rcu-tasks: Maintain a count of tasks blocking RCU Tasks Trace grace period
This commit maintains a new n_trc_holdouts counter that tracks the number
of tasks blocking the RCU Tasks grace period.  This counter is useful
for debugging, and its value has been added to a diagostic message.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
2022-06-21 15:49:38 -07:00
Paul E. McKenney
1a4a8153e0 rcu-tasks: Stop RCU Tasks Trace from scanning full tasks list
This commit takes off the training wheels and relies only on scanning
currently running tasks and tasks that have blocked or been preempted
within their current RCU Tasks Trace read-side critical section.

Before this commit, the time complexity of an RCU Tasks Trace grace
period is O(T), where T is the number of tasks.  After this commit,
this time complexity is O(C+B), where C is the number of CPUs and B
is the number of tasks that have blocked (or been preempted) at least
once during their current RCU Tasks Trace read-side critical sections.
Of course, if all tasks have blocked (or been preempted) at least once
during their current RCU Tasks Trace read-side critical sections, this is
still O(T), but current expectations are that RCU Tasks Trace read-side
critical section will be short and that there will normally not be large
numbers of tasks blocked within such a critical section.

Dave Marchevsky kindly measured the effects of this commit on the RCU
Tasks Trace grace-period latency and the rcu_tasks_trace_kthread task's
CPU consumption per RCU Tasks Trace grace period over the course of a
fixed test, all in milliseconds:

		Before			After

GP latency	22.3 ms stddev > 0.1	17.0 ms stddev < 0.1

GP CPU		 2.3 ms stddev 0.3	 1.1 ms stddev 0.2

This was on a system with 15,000 tasks, so it is reasonable to expect
much larger savings on the systems on which this issue was first noted,
given that they sport well in excess of 100,000 tasks.  CPU consumption
was measured using profiling techniques.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Tested-by: Dave Marchevsky <davemarchevsky@fb.com>
2022-06-21 15:37:28 -07:00
Anatolii Gerasymenko
a632b2a4c9 ice: ethtool: Prohibit improper channel config for DCB
Do not allow setting less channels, than Traffic Classes there are
via ethtool. There must be at least one channel per Traffic Class.

If you set less channels, than Traffic Classes there are, then during
ice_vsi_rebuild there would be allocated only the requested amount
of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map
there would be requested at least one channel per Traffic Class. This
results in setting num_rxq > alloc_rxq and num_txq > alloc_txq.
Later, there would be a NULL pointer dereference in
ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or
tx_rings arrays.

Change ice_set_channels() to return error if you try to allocate less
channels, than Traffic Classes there are.
Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return
status code instead of void.
Add error handling for ice_vsi_setup_q_map() and
ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc().

[53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi.
[53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[53763.992915] PGD 14b45f5067 P4D 0
[53763.996444] Oops: 0002 [#1] SMP NOPTI
[53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE    --------- -  - 4.18.0-240.el8.x86_64 #1
[53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020
[53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice]
[53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4                           c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44
[53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206
[53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018
[53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018
[53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004
[53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000
[53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018
[53764.090976] FS:  000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000
[53764.099362] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0
[53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[53764.127747] PKRU: 55555554
[53764.130781] Call Trace:
[53764.133564]  ice_vsi_rebuild+0x611/0x870 [ice]
[53764.138341]  ice_vsi_recfg_qs+0x94/0x100 [ice]
[53764.143116]  ice_set_channels+0x1a8/0x3e0 [ice]
[53764.147975]  ethtool_set_channels+0x14e/0x240
[53764.152667]  dev_ethtool+0xd74/0x2a10
[53764.156665]  ? __mod_lruvec_state+0x44/0x110
[53764.161280]  ? __mod_lruvec_state+0x44/0x110
[53764.165893]  ? page_add_file_rmap+0x15/0x170
[53764.170518]  ? inet_ioctl+0xd1/0x220
[53764.174445]  ? netdev_run_todo+0x5e/0x290
[53764.178808]  dev_ioctl+0xb5/0x550
[53764.182485]  sock_do_ioctl+0xa0/0x140
[53764.186512]  sock_ioctl+0x1a8/0x300
[53764.190367]  ? selinux_file_ioctl+0x161/0x200
[53764.195090]  do_vfs_ioctl+0xa4/0x640
[53764.199035]  ksys_ioctl+0x60/0x90
[53764.202722]  __x64_sys_ioctl+0x16/0x20
[53764.206845]  do_syscall_64+0x5b/0x1a0
[53764.210887]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 87324e747f ("ice: Implement ethtool ops for channels")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21 15:20:24 -07:00
Aurabindo Pillai
eec53143b7 drm/amd/display: fix incorrect comparison in DML
[Why&How]
GCC 12 catches the following incorrect comparison in the if arm

drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c: In function ‘dml32_ModeSupportAndSystemConfigurationFull’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:3740:33: error: the comparison will always evaluate as ‘true’ for the address of ‘USRRetrainingSupport’ will never be NULL [-Werror=address]
3740 | || &mode_lib->vba.USRRetrainingSupport[i][j])) {
| ^~
In file included from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_lib.h:32,
from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dc.h:45,
from drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:30:
./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_vba.h:1175:14: note: ‘USRRetrainingSupport’ declared here
1175 | bool USRRetrainingSupport[DC__VOLTAGE_STATES][2];
|

Fix this by remove preceding & so that value is compared instead of
address

Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:25 -04:00
Aurabindo Pillai
c85c623ab4 drm/amd/display: fix array index in DML
[Why&How]
When the a 3d array is used by indexing with only one dimension in an if
condition, the addresses get compared instead of the intended value stored in the
array. GCC 12.1 caught this error:

drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c: In function ‘DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:1007:45: error: the comparison will always evaluate as ‘true’ for the address of ‘use_one_row_for_frame_flip’ will never be NULL [-Werror=address]
1007 | if (v->use_one_row_for_frame_flip[k]) {
| ^
In file included from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_lib.h:32,
from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dc.h:45,
from drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:30:
./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_vba.h:605:14: note: ‘use_one_row_for_frame_flip’ declared here
605 | bool use_one_row_for_frame_flip[DC__VOLTAGE_STATES][2][DC__NUM_DPP__MAX];
|

Fix this by explicitly specifying the last two indices.

Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:25 -04:00
Jiang Jian
fd6ae969cf drm/amdgpu: vm - drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped

file: drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
line: 57
  * the kernel tells the the ring what VMID to use for that command
changed to
  * the kernel tells the ring what VMID to use for that command

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:25 -04:00
Alex Deucher
163d4cd26a drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
Use the correct adev variable for the drm_fb_helper in
amdgpu_device_gpu_recover().  Noticed by inspection.

Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Hans de Goede
cb4b7a23ff drm/radeon: Drop CONFIG_BACKLIGHT_CLASS_DEVICE ifdefs
The DRM_RADEON Kconfig code contains:

	select BACKLIGHT_CLASS_DEVICE

So the condition these ifdefs test for is always true, drop them.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Yifan Zhang
efb4fd107c drm/amdkfd: correct sdma queue number of sdma 6.0.1
sdma 6.0.1 has 8 queues instead of 2.

Fixes: 26776a7031 ("drm/amdkfd: add GC 11.0.1 KFD support")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Hans de Goede
83a3439ddb drm/amdgpu: Drop CONFIG_BACKLIGHT_CLASS_DEVICE ifdefs
The DRM_AMDGPU Kconfig code contains:

	select BACKLIGHT_CLASS_DEVICE

So the condition these ifdefs test for is always true, drop them.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Joshua Ashton
43af2220b3 amd/display/dc: Fix COLOR_ENCODING and COLOR_RANGE doing nothing for DCN20+
For DCN20 and above, the code that actually hooks up the provided
input_color_space got lost at some point.

Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+.
Tested using Steam Remote Play Together + gamescope.

Update other DCNs the same wasy DCN1.x was updates in
commit a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")

Fixes: a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Aric Cyr
dc59726822 drm/amd/display: 3.2.191
This DC patchset brings improvements in multiple areas. In summary, we
highlight:

- Remove unnecessary code;
- Small fixes (compilation warnings, typos, etc);
- Improvements in the DPMS code;
- Fix eDP issues
- Improvements in the MST code

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Rodrigo Siqueira
2b2db1f9db drm/amd/display: Drop duplicate define
We already have DALSMC_MSG_TransferTableDram2Smu in the file dalsmc.h;
for this reason, we don't need this definition in the smu msg file.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Rodrigo Siqueira
2d7a1ef85d drm/amd/display: Update hook dcn32_funcs
In DCN32 clk hook functions, we are using the wrong reference for
get_dp_ref_clk_frequency and missing the get_dtb_ref_clk_frequency
reference. This commit adds those references.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Chaitanya Dhere
aeb73c608c drm/amd/display: Implement a pme workaround function
[Why]
For DCN32 we do not have a pme workaround function defined that sends a
BacoAudio message. Default code had uses the DCN30 function for pme
workaround. PMFW headers are inconsistent with their message ID
definitions which cause ID's to clash leading to inconsistent system
behaviour. There is a clash with FCLK message due to inconsitent PMFW
headers.

[How]
Implement a new BacoAudio function to workaround the problem of
inconsistent PMFW headers in order to avoid BacoAudio message clasing
with FCLK Enable message.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00
Rodrigo Siqueira
3e838f7ccf drm/amd/display: Get VCO frequency from registers
Add support to get VCO frequency from registers.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21 18:17:24 -04:00