Commit graph

1,188,286 commits

Author SHA1 Message Date
Linus Torvalds
ace2045ed5 2 smb3 debugging improvements
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmKuOPcACgkQiiy9cAdy
 T1FNoAv/VZwWl1J5iFVAbZhLAt/LhkL/1Ee8TeMRxa7QExifBJ4latsi1duOXBnR
 bRQ+lFuDmg1cuma4aayH7bHGnZZMEoZku0bpj/h8MOTf/w+GLIUUH/0LSEOi1klz
 nmj3fbJ4TMF/rA0Elsz4/iJIZhka3QbTAS3y7l9SlsLlgktoKJuZpEEuRgFsYNEW
 zdQMbb7q53L2txDDZAnR5TqesDgzeXePnvVRZDPAar8HnYrOg4sC6ueqxJtUKKBP
 TcC/2956tXHqd+5EYyH2Vuspf38dGxYs5qIhsMokRoMx42dAQ824JeuFy+D7eps6
 /hwDp+U1XIdllQW7qVD8MZ5CzIZlFKTZGu/B4Uh7GAtzluIAFyayGhVcDdj7LFVV
 fEaR8N9og9DEAmqUhsKLBZM656lhpu38cOslpGqNw0gCSZNxLyyp1hNkXrVlYv9L
 SwclZjoQbOBMPGriyv0h6rSaNoR+J7hps8cpW/eVnXMC5VNnsrXM+EYPJbu8EWYL
 SLJKZp6g
 =oBRl
 -----END PGP SIGNATURE-----

Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client fixes from Steve French:
 "Two cifs debugging improvements - one found to deal with debugging a
  multichannel problem and one for a recent fallocate issue

  This does include the two larger multichannel reconnect (dynamically
  adjusting interfaces on reconnect) patches, because we recently found
  an additional problem with multichannel to one server type that I want
  to include at the same time"

* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: when a channel is not found for server, log its connection id
  smb3: add trace point for SMB2_set_eof
2022-06-18 21:44:44 -05:00
Ulrich Ölmann
4c2f2775ab ARM: dts: imx6: skov: add pwm-regulator to control the panel's VCOM
Skov's i.MX6 based boards come in different flavors which have different panels
attached. For optimal contrast experience each panel type needs an individual
common voltage (VCOM) to drive its TFT backplane. The latter is generated by an
LCD bias supply IC controlled by a pwm as input signal. Introduce a pwm-
regulator to describe this hardware property and parameterize it appropriately
for the different boards.

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-19 09:41:35 +08:00
Xiang wangx
1f3ddff375 ext4: fix a doubled word "need" in a comment
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220605091503.12513-1-wangxiang@cdjrlc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:36:20 -04:00
Zhang Yi
b55c3cd102 ext4: add reserved GDT blocks check
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.

 mkfs.ext4 /dev/sda 3G
 tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
 mount /dev/sda /mnt
 resize2fs /dev/sda 8G

 ========
 BUG: kernel NULL pointer dereference, address: 0000000000000028
 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
 ...
 RIP: 0010:ext4_flex_group_add+0xe08/0x2570
 ...
 Call Trace:
  <TASK>
  ext4_resize_fs+0xbec/0x1660
  __ext4_ioctl+0x1749/0x24e0
  ext4_ioctl+0x12/0x20
  __x64_sys_ioctl+0xa6/0x110
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2dd739617b
 ========

The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:36:08 -04:00
Ding Xiang
bc75a6eb85 ext4: make variable "count" signed
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().

Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:57 -04:00
Baokun Li
cf4ff938b4 ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:57 -04:00
Baokun Li
a08f789d2a ext4: fix bug_on ext4_mb_use_inode_pa
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
	`fallocate -l100M disk`
	`mkfs.ext4 -b 1024 -g 256 disk`
	`mount disk /mnt`
	`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:43 -04:00
Eric Biggers
85456054e1 ext4: fix up test_dummy_encryption handling for new mount API
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function.  That doesn't work well
with the new mount API, which split these into separate steps.

This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.

Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.

Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:43 -04:00
Shuqi Zhang
4efd9f0d12 ext4: use kmemdup() to replace kmalloc + memcpy
Replace kmalloc + memcpy with kmemdup()

Signed-off-by: Shuqi Zhang <zhangshuqi3@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525030120.803330-1-zhangshuqi3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:43 -04:00
Ye Bin
9b6641dd95 ext4: fix super block checksum incorrect after mount
We got issue as follows:
[home]# mount  /dev/sda  test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock!  Retrying...

Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.

To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:24 -04:00
Liang He
173940b3ae xtensa: xtfpga: Fix refcount leak bug in setup
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.

Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-06-18 14:47:41 -07:00
Liang He
a0117dc956 xtensa: Fix refcount leak bug in time.c
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.

Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-06-18 14:46:59 -07:00
Shyam Prasad N
5d24968f5b cifs: when a channel is not found for server, log its connection id
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-18 14:55:06 -05:00
Luca Weiss
82c8936573 proximity: vl53l0x: Make VDD regulator actually optional
Contrary to what the naming might suggest, devm_regulator_get_optional
returns -ENODEV in case the regulator is not found which will trigger
probe error in this driver.

Use devm_regulator_get instead which will return a dummy regulator that
we can just use as if it was a proper regulator.

Fixes: d3d6dba56d ("proximity: vl53l0x: Handle the VDD regulator")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20220614112049.302278-1-luca.weiss@fairphone.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 17:55:17 +01:00
Lukas Bulwahn
0b685f4357 MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
Maintainers of the directory Documentation/devicetree/bindings/iio
are also the maintainers of the corresponding directory
include/dt-bindings/iio.

Add the file entry for include/dt-bindings/iio to the appropriate
section in MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613115045.24326-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 17:32:41 +01:00
Marek Vasut
4e1c59f3ff dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
Align the example node address and reg content to be 0x2a for both.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220615233411.90621-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 17:25:05 +01:00
Kuogee Hsieh
a6e2af64a7 drm/msm/dp: force link training for display resolution change
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.

However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.

This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.

Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)

Changes in v3:
-- revise commit  text
-- add Fixes tag

Changes in v4:
-- revise commit  text

Changes in v5:
-- fix spelling at commit text

Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset

Changes in v7:
-- drop 0 assignment at local variable (ret = 0)

Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl

Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()

Fixes: 62671d2ef2 ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/
Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18 09:14:06 -07:00
Abhinav Kumar
2211e34a9d drm/msm/dpu: limit wb modes based on max_mixer_width
As explained in [1], using max_linewidth to limit the modes
does not seem to remove 4K modes on chipsets such as
sm8250 where the max_linewidth actually supports 4k.

This would have been alright if dual SSPP support was
present but otherwise fails the per SSPP bandwidth check.

The ideal way to implement this would be to filter out
the modes which will exceed the bandwidth check by computing
it.

But this would be an exhaustive solution till we have
dual SSPP support.

Let's instead use max_mixer_width to limit the modes.

max_mixer_width still remains 2560 on sm8250 so even if
the max_linewidth is 4096, the only way 4k modes could have
been supported is to have source split enabled on the SSPP.

Since source split support is not enabled yet in DPU driver,
enforce max_mixer_width as the upper limit on the modes.

[1] https://patchwork.freedesktop.org/patch/489662/

Fixes: e67dcecda0 ("drm/msm/dpu: limit writeback modes according to max_linewidth")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489893/
Link: https://lore.kernel.org/r/1655407606-21760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18 09:14:06 -07:00
Kuogee Hsieh
d80c3ba0ac drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()
During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.

QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007
QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007
QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024
QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042
QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c
QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c
QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002
QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001
QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006
QTISECLIB [01f23dfd3]NOC error fatal

changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch

Fixes: 570d3e5d28 ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/
Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18 09:14:05 -07:00
Miaoqian Lin
b9cc459860 drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 86418f90a4 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488473/
Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-06-18 09:14:05 -07:00
Rob Clark
c8af219d18 drm/msm: Don't overwrite hw fence in hw_init
Prior to the last commit, this could result in setting the GPU
written fence value back to an older value, if we had missed
updating completed_fence prior to suspend.  This was mostly
harmless as the GPU would eventually overwrite it again with
the correct value.  But we should just not do this.  Instead
just leave a sanity check that the fence looks plausible (in
case the GPU scribbled on memory).

Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490138/
Link: https://lore.kernel.org/r/20220618161120.3451993-2-robdclark@gmail.com
2022-06-18 09:13:33 -07:00
Rob Clark
3c7a52217a drm/msm: Drop update_fences()
I noticed while looking at some traces, that we could miss calls to
msm_update_fence(), as the irq could have raced with retire_submits()
which could have already popped the last submit on a ring out of the
queue of in-flight submits.  But walking the list of submits in the
irq handler isn't really needed, as dma_fence_is_signaled() will dtrt.
So lets just drop it entirely.

v2: use spin_lock_irqsave/restore as we are no longer protected by the
    spin_lock_irqsave/restore() in update_fences()

Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490136/
Link: https://lore.kernel.org/r/20220618161120.3451993-1-robdclark@gmail.com
2022-06-18 09:13:32 -07:00
Xiang wangx
7f46748473 iio: gyro: bmg160: Fix typo in comment
Delete the redundant word 'in'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220616141522.2238-1-wangxiang@cdjrlc.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 16:39:37 +01:00
Andy Shevchenko
f7108bcb34 iio: dac: stm32-dac: Replace open coded str_enable_disable()
Replace open coded str_enable_disable() in error message in
stm32_dac_set_enable_state().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220616220023.9894-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 16:38:05 +01:00
Andy Shevchenko
072c7d3438 iio: accel: mma7660: Drop wrong use of ACPI_PTR()
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of making linker to drop a section, drop ACPI_PTR().

As a side effect this makes driver ACPI and OF clean.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220616142451.10322-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 16:33:25 +01:00
Tetsuo Handa
dbacf752cd iio:light:tsl2563: Replace cancel_delayed_work() with cancel_delayed_work_sync().
Since cancel_delayed_work(&chip->poweroff_work) does not guarantee that
tsl2563_poweroff_work() is not running, tsl2563_set_power(chip, 0) can be
called from tsl2563_poweroff_work() after tsl2563_get_power(chip) and
tsl2563_set_power(chip, 1) are called. Use _sync version in order to make
sure that tsl2563_poweroff_work() is no longer running.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/041b6745-f784-ff3f-9836-3f4397d35d94@I-love.SAKURA.ne.jp
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:56:25 +01:00
Tetsuo Handa
76faa32077 iio: light: tsl2563: Replace flush_scheduled_work() with cancel_delayed_work_sync().
Commit 9e61d90115 ("iio: light: tsl2563: Remove
flush_scheduled_work") replaced cancel_delayed_work() +
flush_scheduled_work() with cancel_delayed_work_sync() for only
tsl2563_probe() side.

Do the same thing for tsl2563_remove() side, which was added by
commit 388be48839 ("staging:iio: tsl2563 abi fixes and interrupt
handling").

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/3381176e-2f86-24ba-a8ba-c4ce8f416086@I-love.SAKURA.ne.jp
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:51:17 +01:00
Dmitry Rokosov
4a08069461 iio: trigger: warn about non-registered iio trigger getting attempt
As a part of patch series about wrong trigger register() and get()
calls order in the some IIO drivers trigger initialization path:

https://lore.kernel.org/all/20220524181150.9240-1-ddrokosov@sberdevices.ru/

runtime WARN_ONCE() is added to alarm IIO driver authors who make such
a mistake.

When an IIO driver allocates a new IIO trigger, it should register it
before calling the get() operation. In other words, each IIO driver
must abide by IIO trigger alloc()/register()/get() calls order.

Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20220607183907.20017-1-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:26:17 +01:00
Jonathan Cameron
0691cd4737 Merge branch 'immutable-qcom-spmi-rradc' into togreg
Immutable branch used to allow changes to SPMI and MFD subsystems
needed by this driver to be pulled into those trees as well if
relevant.
2022-06-18 14:15:52 +01:00
Caleb Connolly
72c7df8505 iio: adc: qcom-spmi-rradc: introduce round robin adc
The Round Robin ADC is responsible for reading data about the rate of
charge from the USB or DC input ports, it can also read the battery
ID (resistence), skin temperature and the die temperature of the pmic.
It is found on the PMI8998 and PM660 Qualcomm PMICs.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-6-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:14:29 +01:00
Caleb Connolly
7ea58c951a dt-bindings: iio: adc: document qcom-spmi-rradc
Add dt-binding docs for the Qualcomm SPMI RRADC found in PMICs like
PMI8998 and PMI8994

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-5-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:01:16 +01:00
Caleb Connolly
d23c3c085a mfd: qcom-spmi-pmic: read fab id on supported PMICs
The PMI8998 and PM660 expose the fab_id, this is needed by drivers like
the RRADC to calibrate ADC values.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:01:16 +01:00
Caleb Connolly
e9c11c6e3a mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
Some PMIC functions such as the RRADC need to be aware of the PMIC
chip revision information to implement errata or otherwise adjust
behaviour, export the PMIC information to enable this.

This is specifically required to enable the RRADC to adjust
coefficients based on which chip fab the PMIC was produced in,
this can vary per unique device and therefore has to be read at
runtime.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 14:01:16 +01:00
Caleb Connolly
9a2139c291 spmi: add a helper to look up an SPMI device from a device node
The helper function spmi_device_from_of() takes a device node and
returns the SPMI device associated with it.
This is like of_find_device_by_node but for SPMI devices.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18 13:48:19 +01:00
Eric Dumazet
dbca1596bb ping: convert to RCU lookups, get rid of rwlock
Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.

I thought rwlock were at fault and sent this patch:

https://lkml.org/lkml/2022/6/17/272

But Peter and Linus essentially told me rwlock had to be unfair.

We need to get rid of rwlock in networking code.

Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-18 10:54:29 +01:00
Peter Lafreniere
f0623340fd ax25: use GFP_KERNEL in ax25_dev_device_up()
ax25_dev_device_up() is only called during device setup, which is
done in user context. In addition, ax25_dev_device_up()
unconditionally calls ax25_register_dev_sysctl(), which already
allocates with GFP_KERNEL.

Since it is allowed to sleep in this function, here we change
ax25_dev_device_up() to use GFP_KERNEL to reduce unnecessary
out-of-memory errors.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Lafreniere <pjlafren@mtu.edu>
Link: https://lore.kernel.org/r/20220616152333.9812-1-pjlafren@mtu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:34:13 -07:00
Peilin Ye
a2b1a5d40b net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms
As reported by Yuming, currently tc always show a latency of UINT_MAX
for netem Qdisc's on 32-bit platforms:

    $ tc qdisc add dev dummy0 root netem latency 100ms
    $ tc qdisc show dev dummy0
    qdisc netem 8001: root refcnt 2 limit 1000 delay 275s  275s
                                               ^^^^^^^^^^^^^^^^

Let us take a closer look at netem_dump():

        qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency,
                             UINT_MAX);

qopt.latency is __u32, psched_tdiff_t is signed long,
(psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so
qopt.latency is always UINT_MAX.

Fix it by using psched_time_t (u64) instead.

Note: confusingly, users have two ways to specify 'latency':

  1. normally, via '__u32 latency' in struct tc_netem_qopt;
  2. via the TCA_NETEM_LATENCY64 attribute, which is s64.

For the second case, theoretically 'latency' could be negative.  This
patch ignores that corner case, since it is broken (i.e. assigning a
negative s64 to __u32) anyways, and should be handled separately.

Thanks Ted Lin for the analysis [1] .

[1] https://github.com/raspberrypi/linux/issues/3512

Reported-by: Yuming Chen <chenyuming.junnan@bytedance.com>
Fixes: 112f9cb656 ("netem: convert to qdisc_watchdog_schedule_ns")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:29:38 -07:00
Ivan Vecera
a3bb7b6381 ethtool: Fix get module eeprom fallback
Function fallback_set_params() checks if the module type returned
by a driver is ETH_MODULE_SFF_8079 and in this case it assumes
that buffer returns a concatenated content of page  A0h and A2h.
The check is wrong because the correct type is ETH_MODULE_SFF_8472.

Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:22:16 -07:00
Jay Vosburgh
7a9214f3d8 bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers
The bonding ARP monitor fails to decrement send_peer_notif, the
number of peer notifications (gratuitous ARP or ND) to be sent. This
results in a continuous series of notifications.

Correct this by decrementing the counter for each notification.

Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: b0929915e0 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor")
Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/9400.1655407960@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:18:44 -07:00
Xiang wangx
f691b4d87e atm: iphase: Fix typo in comment
Delete the redundant word 'the'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220616164155.11686-1-wangxiang@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:17:18 -07:00
Xiang wangx
959edef658 ppp: Fix typo in comment
Delete the redundant word 'the'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220616142624.3397-1-wangxiang@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:17:04 -07:00
Lorenzo Bianconi
3f6a57ee85 igb: fix a use-after-free issue in igb_clean_tx_ring
Fix the following use-after-free bug in igb_clean_tx_ring routine when
the NIC is running in XDP mode. The issue can be triggered redirecting
traffic into the igb NIC and then closing the device while the traffic
is flowing.

[   73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9
[   73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017
[   73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0
[   73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282
[   73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000
[   73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0
[   73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058
[   73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090
[   73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000
[   73.404806] FS:  00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000
[   73.413129] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0
[   73.426565] Call Trace:
[   73.429087]  <TASK>
[   73.431314]  igb_clean_tx_ring+0x43/0x140 [igb]
[   73.436002]  igb_down+0x1d7/0x220 [igb]
[   73.439974]  __igb_close+0x3c/0x120 [igb]
[   73.444118]  igb_xdp+0x10c/0x150 [igb]
[   73.447983]  ? igb_pci_sriov_configure+0x70/0x70 [igb]
[   73.453362]  dev_xdp_install+0xda/0x110
[   73.457371]  dev_xdp_attach+0x1da/0x550
[   73.461369]  do_setlink+0xfd0/0x10f0
[   73.465166]  ? __nla_validate_parse+0x89/0xc70
[   73.469714]  rtnl_setlink+0x11a/0x1e0
[   73.473547]  rtnetlink_rcv_msg+0x145/0x3d0
[   73.477709]  ? rtnl_calcit.isra.0+0x130/0x130
[   73.482258]  netlink_rcv_skb+0x8d/0x110
[   73.486229]  netlink_unicast+0x230/0x340
[   73.490317]  netlink_sendmsg+0x215/0x470
[   73.494395]  __sys_sendto+0x179/0x190
[   73.498268]  ? move_addr_to_user+0x37/0x70
[   73.502547]  ? __sys_getsockname+0x84/0xe0
[   73.506853]  ? netlink_setsockopt+0x1c1/0x4a0
[   73.511349]  ? __sys_setsockopt+0xc8/0x1d0
[   73.515636]  __x64_sys_sendto+0x20/0x30
[   73.519603]  do_syscall_64+0x3b/0x80
[   73.523399]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   73.528712] RIP: 0033:0x7ff38d41f20c
[   73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c
[   73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003
[   73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
[   73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0
[   73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30
[   73.596545]  </TASK>
[   73.598842] ---[ end trace 0000000000000000 ]---

Fixes: 9cbc948b5a ("igb: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:14:07 -07:00
Yinjun Zhang
382f99c442 nfp: add support for .get_pauseparam()
Show correct pause frame parameters for nfp. These parameters cannot
be configured, so .set_pauseparam() is not implemented. With this
change:

 #ethtool --show-pause enp1s0np0
 Pause parameters for enp1s0np0:
 Autonegotiate:  off
 RX:             on
 TX:             on

Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220616133358.135305-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:13:03 -07:00
Oleksij Rempel
7a49f21930 net: dsa: ar9331: fix potential dead lock on mdio access
Rework MDIO locking to avoid potential  circular locking:

 WARNING: possible circular locking dependency detected
 5.19.0-rc1-ar9331-00017-g3ab364c7c48c #5 Not tainted
 ------------------------------------------------------
 kworker/u2:4/68 is trying to acquire lock:
 81f3c83c (ar9331:1005:(&ar9331_mdio_regmap_config)->lock){+.+.}-{4:4}, at: regmap_write+0x50/0x8c

 but task is already holding lock:
 81f60494 (&bus->mdio_lock){+.+.}-{4:4}, at: mdiobus_read+0x40/0x78

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&bus->mdio_lock){+.+.}-{4:4}:
        lock_acquire+0x2d4/0x360
        __mutex_lock+0xf8/0x384
        mutex_lock_nested+0x2c/0x38
        mdiobus_write+0x44/0x80
        ar9331_sw_bus_write+0x50/0xe4
        _regmap_raw_write_impl+0x604/0x724
        _regmap_bus_raw_write+0x9c/0xb4
        _regmap_write+0xdc/0x1a0
        _regmap_update_bits+0xf4/0x118
        _regmap_select_page+0x108/0x138
        _regmap_raw_read+0x25c/0x288
        _regmap_bus_read+0x60/0x98
        _regmap_read+0xd4/0x1b0
        _regmap_update_bits+0xc4/0x118
        regmap_update_bits_base+0x64/0x8c
        ar9331_sw_irq_bus_sync_unlock+0x40/0x6c
        __irq_set_handler+0x7c/0xac
        ar9331_sw_irq_map+0x48/0x7c
        irq_domain_associate+0x174/0x208
        irq_create_mapping_affinity+0x1a8/0x230
        ar9331_sw_probe+0x22c/0x388
        mdio_probe+0x44/0x70
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __device_attach_driver+0xe4/0x130
        bus_for_each_drv+0xb4/0xd8
        __device_attach+0x104/0x1a4
        bus_probe_device+0x48/0xc4
        device_add+0x600/0x800
        mdio_device_register+0x68/0xa0
        of_mdiobus_register+0x2bc/0x3c4
        ag71xx_probe+0x6e4/0x984
        platform_probe+0x78/0xd0
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __driver_attach+0x17c/0x190
        bus_for_each_dev+0x8c/0xd0
        bus_add_driver+0x110/0x228
        driver_register+0xe4/0x12c
        do_one_initcall+0x104/0x2a0
        kernel_init_freeable+0x250/0x288
        kernel_init+0x34/0x130
        ret_from_kernel_thread+0x14/0x1c

 -> #0 (ar9331:1005:(&ar9331_mdio_regmap_config)->lock){+.+.}-{4:4}:
        check_noncircular+0x88/0xc0
        __lock_acquire+0x10bc/0x18bc
        lock_acquire+0x2d4/0x360
        __mutex_lock+0xf8/0x384
        mutex_lock_nested+0x2c/0x38
        regmap_write+0x50/0x8c
        ar9331_sw_mbus_read+0x74/0x1b8
        __mdiobus_read+0x90/0xec
        mdiobus_read+0x50/0x78
        get_phy_device+0xa0/0x18c
        fwnode_mdiobus_register_phy+0x120/0x1d4
        of_mdiobus_register+0x244/0x3c4
        devm_of_mdiobus_register+0xe8/0x100
        ar9331_sw_setup+0x16c/0x3a0
        dsa_register_switch+0x7dc/0xcc0
        ar9331_sw_probe+0x370/0x388
        mdio_probe+0x44/0x70
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __device_attach_driver+0xe4/0x130
        bus_for_each_drv+0xb4/0xd8
        __device_attach+0x104/0x1a4
        bus_probe_device+0x48/0xc4
        deferred_probe_work_func+0xf0/0x10c
        process_one_work+0x314/0x4d4
        worker_thread+0x2a4/0x354
        kthread+0x134/0x13c
        ret_from_kernel_thread+0x14/0x1c

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&bus->mdio_lock);
                                lock(ar9331:1005:(&ar9331_mdio_regmap_config)->lock);
                                lock(&bus->mdio_lock);
   lock(ar9331:1005:(&ar9331_mdio_regmap_config)->lock);

  *** DEADLOCK ***

 5 locks held by kworker/u2:4/68:
  #0: 81c04eb4 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1e4/0x4d4
  #1: 81f0de78 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1e4/0x4d4
  #2: 81f0a880 (&dev->mutex){....}-{4:4}, at: __device_attach+0x40/0x1a4
  #3: 80c8aee0 (dsa2_mutex){+.+.}-{4:4}, at: dsa_register_switch+0x5c/0xcc0
  #4: 81f60494 (&bus->mdio_lock){+.+.}-{4:4}, at: mdiobus_read+0x40/0x78

 stack backtrace:
 CPU: 0 PID: 68 Comm: kworker/u2:4 Not tainted 5.19.0-rc1-ar9331-00017-g3ab364c7c48c #5
 Workqueue: events_unbound deferred_probe_work_func
 Stack : 00000056 800d4638 81f0d64c 00000004 00000018 00000000 80a20000 80a20000
         80937590 81ef3858 81f0d760 3913578a 00000005 8045e824 81f0d600 a8db84cc
         00000000 00000000 80937590 00000a44 00000000 00000002 00000001 ffffffff
         81f0d6a4 80982d7c 0000000f 20202020 80a20000 00000001 80937590 81ef3858
         81f0d760 3913578a 00000005 00000005 00000000 03bd0000 00000000 80e00000
         ...
 Call Trace:
 [<80069db0>] show_stack+0x94/0x130
 [<8045e824>] dump_stack_lvl+0x54/0x8c
 [<800c7fac>] check_noncircular+0x88/0xc0
 [<800ca068>] __lock_acquire+0x10bc/0x18bc
 [<800cb478>] lock_acquire+0x2d4/0x360
 [<807b84c4>] __mutex_lock+0xf8/0x384
 [<807b877c>] mutex_lock_nested+0x2c/0x38
 [<804ea640>] regmap_write+0x50/0x8c
 [<80501e38>] ar9331_sw_mbus_read+0x74/0x1b8
 [<804fe9a0>] __mdiobus_read+0x90/0xec
 [<804feac4>] mdiobus_read+0x50/0x78
 [<804fcf74>] get_phy_device+0xa0/0x18c
 [<804ffeb4>] fwnode_mdiobus_register_phy+0x120/0x1d4
 [<805004f0>] of_mdiobus_register+0x244/0x3c4
 [<804f0c50>] devm_of_mdiobus_register+0xe8/0x100
 [<805017a0>] ar9331_sw_setup+0x16c/0x3a0
 [<807355c8>] dsa_register_switch+0x7dc/0xcc0
 [<80501468>] ar9331_sw_probe+0x370/0x388
 [<804ff0c0>] mdio_probe+0x44/0x70
 [<804d1848>] really_probe+0x200/0x424
 [<804d1cfc>] __driver_probe_device+0x290/0x298
 [<804d1d58>] driver_probe_device+0x54/0xe4
 [<804d2298>] __device_attach_driver+0xe4/0x130
 [<804cf048>] bus_for_each_drv+0xb4/0xd8
 [<804d200c>] __device_attach+0x104/0x1a4
 [<804d026c>] bus_probe_device+0x48/0xc4
 [<804d108c>] deferred_probe_work_func+0xf0/0x10c
 [<800a0ffc>] process_one_work+0x314/0x4d4
 [<800a17fc>] worker_thread+0x2a4/0x354
 [<800a9a54>] kthread+0x134/0x13c
 [<8006306c>] ret_from_kernel_thread+0x14/0x1c
[

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220616112550.877118-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 20:11:14 -07:00
Jakub Kicinski
9fb424c4c2 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2022-06-17

We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).

The main changes are:

1) Add 64 bit enum value support to BTF, from Yonghong Song.

2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.

3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
   socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.

4) Fix libbpf's internal USDT address translation logic for shared libraries as
   well as uprobe's symbol file offset calculation, from Andrii Nakryiko.

5) Extend libbpf to provide an API for textual representation of the various
   map/prog/attach/link types and use it in bpftool, from Daniel Müller.

6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
   core seen in 32 bit when storing BPF function addresses, from Pu Lehui.

7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
   for 'long' types, from Douglas Raillard.

8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
   has been unreliable and caused a regression on COS, from Quentin Monnet.

9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
   detachment, from Tadeusz Struk.

10) Fix bpftool build bootstrapping during cross compilation which was pointing
    to the wrong AR process, from Shahab Vahedi.

11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.

12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
    is no free element. Also add a benchmark as reproducer, from Feng Zhou.

13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.

14) Various minor cleanup and improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
  bpf: Fix bpf_skc_lookup comment wrt. return type
  bpf: Fix non-static bpf_func_proto struct definitions
  selftests/bpf: Don't force lld on non-x86 architectures
  selftests/bpf: Add selftests for raw syncookie helpers in TC mode
  bpf: Allow the new syncookie helpers to work with SKBs
  selftests/bpf: Add selftests for raw syncookie helpers
  bpf: Add helpers to issue and check SYN cookies in XDP
  bpf: Allow helpers to accept pointers with a fixed size
  bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
  selftests/bpf: add tests for sleepable (uk)probes
  libbpf: add support for sleepable uprobe programs
  bpf: allow sleepable uprobe programs to attach
  bpf: implement sleepable uprobes by chaining gps
  bpf: move bpf_prog to bpf.h
  libbpf: Fix internal USDT address translation logic for shared libraries
  samples/bpf: Check detach prog exist or not in xdp_fwd
  selftests/bpf: Avoid skipping certain subtests
  selftests/bpf: Fix test_varlen verification failure with latest llvm
  bpftool: Do not check return value from libbpf_set_strict_mode()
  Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
  ...
====================

Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 19:35:19 -07:00
Jakub Kicinski
582573f1b2 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2022-06-17

We've added 12 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 305 insertions(+), 107 deletions(-).

The main changes are:

1) Fix x86 JIT tailcall count offset on BPF-2-BPF call, from Jakub Sitnicki.

2) Fix a kprobe_multi link bug which misplaces BPF cookies, from Jiri Olsa.

3) Fix an infinite loop when processing a module's BTF, from Kumar Kartikeya Dwivedi.

4) Fix getting a rethook only in RCU available context, from Masami Hiramatsu.

5) Fix request socket refcount leak in sk lookup helpers, from Jon Maxwell.

6) Fix xsk xmit behavior which wrongly adds skb to already full cq, from Ciara Loftus.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  rethook: Reject getting a rethook if RCU is not watching
  fprobe, samples: Add use_trace option and show hit/missed counter
  bpf, docs: Update some of the JIT/maintenance entries
  selftest/bpf: Fix kprobe_multi bench test
  bpf: Force cookies array to follow symbols sorting
  ftrace: Keep address offset in ftrace_lookup_symbols
  selftests/bpf: Shuffle cookies symbols in kprobe multi test
  selftests/bpf: Test tail call counting with bpf2bpf and data on stack
  bpf, x86: Fix tail call count offset calculation on bpf2bpf call
  bpf: Limit maximum modifier chain length in btf_check_type_tags
  bpf: Fix request_sock leak in sk lookup helpers
  xsk: Fix generic transmit when completion queue reservation fails
====================

Link: https://lore.kernel.org/r/20220617202119.2421-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17 18:30:01 -07:00
Yang Li
b710673e2d soc: ti: wkup_m3_ipc: Remove unneeded semicolon
Eliminate the following coccicheck warning:
./drivers/soc/ti/wkup_m3_ipc.c:691:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220504225125.45830-1-yang.lee@linux.alibaba.com
2022-06-17 20:25:01 -05:00
Krzysztof Kozlowski
3ea73bf022 ARM: dts: keystone: Adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220526204139.831895-3-krzysztof.kozlowski@linaro.org
2022-06-17 20:24:35 -05:00
Krzysztof Kozlowski
85423386c9 arm64: dts: ti: Align gpio-key node names with dtschema
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220616005333.18491-29-krzysztof.kozlowski@linaro.org
2022-06-17 20:24:06 -05:00
Krzysztof Kozlowski
5888f1ed17 arm64: dts: ti: Adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220526204139.831895-1-krzysztof.kozlowski@linaro.org
2022-06-17 20:24:02 -05:00